Foot operated pedal P15 - W. Gessmann Industrial Controllers · Isolation and Hhgh voltage test...
2
1 Foot operated pedal P15 page 12 V2016/1 16.02.2016 Technical details may vary based on configuration or application! Technical data subject to change without notice! Gessmann’s foot operated pedal P15 is specially designed for usage in railway applica- tions.Their robust design which is based on the relevant standards EN-60077 and EN- 50155 guarantees low life cycle costs and a maintainability over period of 35 years. Technical data Ambient temperature outside vehicle -40°C to +50°C -> EN 50 155 Class T1, T2, T3, TX Shock and vibration According to EN 61373 Isolation and Hhgh voltage test According to EN 50155 Pollution degree PD 3 according to EN 60077-1 (others on demand) Fire and smoke Compliant to EN 45545 (others on demand) Mechanical endurance 10 million operating cycles Electrical endurance Minimum operating cycle class C3/A3 according to EN 60077-2 P15 C1 I C01 Basic Unit P15 Foot operated pedal Output Signal C1 1 Contact C2 2 Contacts Interface I1 Cable with connector* I2 Cable without connector* *Customer specific lenght Cable outlet C01 Left side C02 Bottom side Example
Transcript of Foot operated pedal P15 - W. Gessmann Industrial Controllers · Isolation and Hhgh voltage test...
1
Foot operated pedalP15
page 12
V20
16/1
16.
02.2
016
Technical details may vary based on configuration or application! Technical data subject to change without notice!
Gessmann’s foot operated pedal P15 is specially designed for usage in railway applica-tions.Their robust design which is based on the relevant standards EN-60077 and EN-50155 guarantees low life cycle costs and a maintainability over period of 35 years.
Technical data
Ambient temperature outside vehicle -40°C to +50°C -> EN 50 155 Class T1, T2, T3, TX
Shock and vibration According to EN 61373
Isolation and Hhgh voltage test According to EN 50155
Pollution degree PD 3 according to EN 60077-1 (others on demand)
Fire and smoke Compliant to EN 45545 (others on demand)
Mechanical endurance 10 million operating cycles
Electrical endurance Minimum operating cycle class C3/A3 according to EN 60077-2
P15 C1 I C01
Basic Unit
P15 Foot operated pedal
Output Signal
C1 1 Contact
C2 2 Contacts
Interface
I1 Cable with connector*
I2 Cable without connector*
*Customer specific lenght
Cable outlet
C01 Left side
C02 Bottom side
Example
1
Foot operated pedalP15
page 13
Technical details may vary based on confi guration or application! Technical data subject to change without notice!
![Electronic supplementary information for · Figure S4. The CD spectra of the copper(II)–hhgh system ([Cu II] = [hhgh] = 0.055 m M, T = 298 K, I = 0.1 M NaCl, pH = 7.8-12.03) at](https://static.fdocuments.net/doc/165x107/5fac5bf10d19a652a072755f/electronic-supplementary-information-figure-s4-the-cd-spectra-of-the-copperiiahhgh.jpg)
![AFDGHPLF AFKLHYHPHQW CHQWHU (AAC) · lqglylgxdol]h qvwuxfwlrq v hhgh rpsohwh kh wxghqwv' rjudp. tklv rxuvh v rw xoiloo juhh htxluhphqwv. 16 uv./vhphvwhu $2 wr 5 3 crn # dd\v tlphv](https://static.fdocuments.net/doc/165x107/5fac5bf20d19a652a0727563/afdghplf-afklhyhphqw-chqwhu-aac-lqglylgxdolh-qvwuxfwlrq-v-hhgh-rpsohwh-kh-wxghqwv.jpg)
