FOCUS OPTICS TECHNOLOG F.O.T. Specification SheetCut+Sheet.pdf · 6/21/2019 · FOCUS OPTICS...
Transcript of FOCUS OPTICS TECHNOLOG F.O.T. Specification SheetCut+Sheet.pdf · 6/21/2019 · FOCUS OPTICS...
FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018
1 of 14
F.O.T.™ is a collection of high performance precision optics distinguished by its industry leading size to efficacy ratio and ability to seamlessly interconnect. F.O.T.™ allows for surface mount solutions for beam control in wall washing, grazing, spot and asymmetric distributions for limitless design scenarios.
ELECTRICAL
PHYSICAL
PERFORMANCE
LUMEN OUTPUT
Input Voltage Dimming Options
Power Consumption Wire Size Certification
24VDC• PURE DC™• 0-10V• DMX• Lutron (2-WIRE, 3-WIRE, EcoSystem)9 Watts per foot18AWG, 2 wireETL - Conforms to UL Std. 2108; Certified to CSA Std. C22.2 No. 9.0; Title 24 - All models are JA8 2016compliant when used with 0-10V, DMX, Lutron A-Series 2-Wire or Lutron Premier dimming.
Standard Lengths
Operating Temperature EnvironmentMaximum Run Length Dimensions
Optics
6.00” (152.40mm), 12.00” (304.80mm), 24.00” (609.60mm)-20° C (-40°F) to +50°C (+122°F)Indoor10.00’Width: 0.72” (18.40mm) Height:Asymmetric: 0.38” (9.60mm)Narrow: 0.35” (9.00mm)Oval Grazing: 0.32” (8.30mm)AsymmetricNarrow: 15°x15° DistributionOval Grazing: 20ºx45º Distribution
CRILumen MaintenanceBinning Tolerance Warranty
9050,000 Hours L70 at 25ºC ambient +/- 60K5 years
2700K3000K 3500K
608.00 lm/ft645.00 lm/ft748.00 lm/ft
628.00 lm/ft674.00 lm/ft782.00 lm/ft
599.00 lm/ft660.00 lm/ft766.00 lm/ft
ASYMMETRIC NARROW OVAL GRAZ.
Note: Stated lumen values have a tolerance of +/- 10%.
R
+ + + + + + +
90 = 9.0WPART NUMBER BUILDER
ChannelPower Feed ConnectorJumper, 4’’Jumper, 12’’
Optic Arts® Channel (pg. 3-4)FOT-PFC (pg. 5)FOT-J04 (pg. 6)FOT-J12 (pg. 6)
ACCESSORIES
FOT AS = AsymmetricNA = NarrowOG = Oval Grazing
27 = 2700K1
30 = 3000K1
35 = 3500K1
SERIES OPTICS COLOR
F.O.T.™
TITLE24
Note: All models are JA8 when used with 0-10V, DMX, Lutron A-Series 2-Wire or Lutron Premier dimming. (Only available in configuration 3)
1: JA8 when used with 0-10V, DMX, Lutron A-Series 2-Wire or Lutron Premier dimming. (Only available in configuration 3)
VOLTAGE
24 = 24 VDC
CONFIGURATION LENGTH JA8
FLC1 = FLEX Config 1FLC2 = FLEX Config 2FLC3 = FLEX Config 3
XX = Custom Length (6” Increments)
Y = YesN = No
90 = 9.0W
WATTAGE
Narrow - 1
5ºx15º Distr
ibution
Oval Grazin
g - 20ºx4
5º Distr
ibution
Asymmetri
c
FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018
2 of 14
DIMENSIONS & OPTICS
• Due to the nature of the F.O.T.™ product, run lengths may not fall exactly on specified length. In this case, Optic Arts® will always provide length to the smaller dimension unless otherwise specified.
• Unless otherwise specified, 1.00” per power feed is added to channel length.
• Some on-site assembly required. See installation guides for details.
0.72
”
0.72
”
0.72
”0.
38’’
(9.6
0mm
)0.
35’’
(9.0
0mm
)
0.32
’’(8
.30m
m)
0.86” 0.86”
0.86”
Narrow - 15ºx15º Distribution
Narrow
Asymmetric
Asymmetric
Oval Grazing - 20ºx45º Distribution
Oval Grazing
Note: Supplied in 6", 12", 24" sizes. Field connected up to 10' max.
180 165150
135
120
105
90
75
60
45
3015015
30
45
60
75
90
105
120
135
150165
Beam angle
180 165150
135
120
105
90
75
60
45
3015015
30
45
60
75
90
105
120
135
150165
Beam angle
180 165150
135
120
105
90
75
60
45
3015015
30
45
60
75
90
105
120
135
150165
Beam angle 97.9º 43.6º 14º
Specified Length0.75”
DIMENSIONS
WidthHeight
Standard Lengths Pitch LengthMax Run Length
0.72” (18.40mm),
Asymmetric: 0.38” (9.60mm), Narrow: 0.35” (9.00mm), Oval Grazing: 0.32” (8.30mm),
6.00”, 12.00”, 24.00”
0.86” (21.85mm)
10.00’ (3048.00mm)
FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018
3 of 14
Click to access CHANNEL ACCESSORIES CATALOGUE >
CH-FOT-SH-SF-SSA: 0.91” (23.10mm)B: 0.44” (11.13mm)C: 0.73” (18.55mm)
DIMENSIONS
ACCESSORIES
CH-FOT-SH-SF-ECCH-MCCH-MC-RCH-FOT-SCREWCH-PD-KITCH-AB-STACH-AB-90FCH-AB-90R
End CapMounting ClipRotating Mounting ClipF.O.T. Mounting ScrewPendant KitStraight Aligner Bracket90 Degree Flat Aligner Bracket90 Degree Raised Aligner Bracket
FINISH
*Special order finishes may increase order lead time and incur an added cost
Satin SilverDeep Bronze Anodized*Matte Black Anodized*White Powder Coat*Blue Powder Coat*
Red Powder Coat*Gray Powder Coat*Chrome*Custom RAL Powder Coat*
Anodized aluminum channel designed to fit Optic Arts® F.O.T.™.
PHYSICAL
MOUNTING OPTIONS - CHANNEL
CH-FOT-SH-SF-SS
Description Material Length
Channel for F.O.T. ™.Anodized AluminumChannel: 7.00’
C
B
A
FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018
4 of 14
Click to access CHANNEL ACCESSORIES CATALOGUE >
Anodized aluminum channel designed to fit Optic Arts® F.O.T.™.
MOUNTING OPTIONS - CHANNEL
CH-FOT-TL-SF-SS
CH-FOT-TL-SF-SSA: 0.91” (23.10mm)B: 1.04” (26.16mm)C: 0.73” (18.55mm)
DIMENSIONS
ACCESSORIES
CH-MD-LN-FL-CCCH-FOT-TL-SF-ECCH-FOT-TL-SF-ECHCH-MCCH-MC-RCH-FOT-SCREWCH-PD-KITCH-AB-STACH-AB-90FCH-AB-90R
Clear Flat LensEnd Cap (0.625” added length)1
End Cap w/hole (0.625” added length)1
Mounting ClipRotating Mounting ClipF.O.T. Mounting ScrewPendant KitStraight Aligner Bracket90 Degree Flat Aligner Bracket90 Degree Raised Aligner Bracket
FINISH
*Special order finishes may increase order lead time and incur an added cost
Satin SilverDeep Bronze Anodized*Matte Black Anodized*White Powder Coat*Blue Powder Coat*
Red Powder Coat*Gray Powder Coat*Chrome*Custom RAL Powder Coat*
PHYSICAL
Description
Material Lens CoverLength
Deep channel for Narrow & Oval Grazing F.O.T.™.Anodized AluminumPolycarbonateChannel: 7.00’
CB
A
1: Endcaps add 1.25” to total length of fixture.
FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018
5 of 14
MOUNTING OPTIONS
MOUNTING CLIP
CH-MC
ROTATING MOUNTING CLIP
CH-MC-R
CH-FOT-TL-SF-SS
CH-FOT-TL-SF-SS
CH-FOT-TL-SF-SS
CH-FOT-SH-SF-SS
CH-FOT-SH-SF-SS
CH-FOT-SH-SF-SS
CHANNEL TYPE DIMENSIONS W/CLIP
CH-FOT-SH-SF-SS
CH-FOT-SH-SF-SS
CH-FOT-TL-SF-SS
CH-FOT-TL-SF-SS
H: 1.07” (27.38mm); W: 1.44’’ (36.58mm)
H: 1.67” (42.41mm); W: 1.44’’ (36.58mm)
PENDANT
CH-PD-KIT
CHANNEL TYPE SUSPENSION HEIGHT
Up to 3’ (914.40mm)
Up to 3’ (914.40mm)
FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018
6 of 14
0.22”(5.59mm)
0.22”(5.59mm)
0.22”(5.59mm)
3.13”(79.50mm) 1.46”
(37.08mm)
1.61”(40.89mm)
ALIGNER OPTIONS
Compatible Channel: Tall
STRAIGHT INSIDE/OUTSIDE CORNERS FLAT CORNERS
FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018
7 of 14
ACCESSORIES
Only available with CH-FOT-SH-SF-SS
Only available with CH-FOT-SH-SF-SS
0.12”(3.00m
m)
0.31”(8.00m
m)
0.58”(14.70mm)
0.19”(4.85mm)
0.30”(7.65mm)
6’ POWERFEED CONNECTOR
4’’ JUMPER
12’’ JUMPER
F.O.T.™ MOUNTING SCREW
FOT-PFC
FOT-J04
FOT-J12
CH-FOT-SCREW
FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018
8 of 14
• Specify Config-1
• Specify F.O.T. type and channel type
• One power feed per F.O.T. run
• Channel shipped uncut for field cutting.
• JA8 2016 not available in Config-1
• Config-1 is quick ship if run lengths are provided at time of order. Take offs, if needed, will add lead time.
1
3
6’ Wire Lead
Packaged in Foam Sleeve& Labelled
CONFIGURATION TYPES
Pre-Assembled Factory Finished Fixtures 1
• Specify Config-3
• Fully assembled fixture
• ETL stamped and listed as a fixture
• 7’ max length
• Standard 6’ power lead unless otherwise specified
• Specify FLEXConfig-2
• Specify FLEX type and channel type
• Specify run lengths
• IP68 only available in FLEXConfig-2
• If no config is specified, and run lengths are provided, FLEXConfig-2 will be used
6’ Wire Lead Standard
Tape Cut to Length
Cut To Length With Soldered Leads, Assemble On-Site 1, 2, 32
Channel Cut & LabelledFLEX Cut & Labelled
1. Due to the nature of the FOT product, specific lengths do not factor in endcaps. Actual length of fixture is determined by which channel is used (see channel page for added endcap length).
NOTES:
F.O.T. Boards,Standard Product Labels Channel Uncut
F.O.T. Boards, Channel uncut for field cutting
Power feeds
No Wire Lead
FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018
9 of 14
COMPATIBLE DRIVERS
120 VAC
PURE DC™DRIVER
24V DC+
24V DC-
+
–
120 VAC WIRING
PURE DC™DRIVER
24V DC+
24V DC-
277 VAC+
–
277 VAC WIRING
PURE DC™ MLV (PDC)
40W 120/277VAC PURE DC™ MLV DIMMABLE DRIVER
96W 120/277VAC PURE DC™ MLV DIMMABLE DRIVER
PDC.40.24
PDC.96.24
DESCRIPTIONPART
DIMENSIONS
DIMMING PERFORMANCE
40W96W
L 14.25”; W 3.00”; H 2.88”
L 14.75”; W 4.31”; H 4.81”
PURE DC™ DRIVER Dims to 0.1% on most MLV dimmers
FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018
10 of 14
COMPATIBLE DRIVERS
ELECTRONIC DRIVER - NON-DIM (ND)
96W 120-277VAC ELECTRONIC DRIVERGG100E-24-UNV
DESCRIPTIONPART
GG100-24-UNV
120 - 277 VAC
DIMENSIONS
DIMMING PERFORMANCE
ELECTRONIC DRIVER H 3.00”; W 11.46”; D 1.30”
ELECTRONIC DRIVER Non-Dim
24V DC+ 24V DC-
ELECTRONIC DRIVER W/0-10V MODULE (010)
96W 120-277VAC ELECTRONIC DRIVER WITH 0-10V DIMMING
MODULE (SINK)
GG100E-24-UNV-010V
DESCRIPTIONPART
DIMENSIONS
DIMMING PERFORMANCE
ELECTRONIC DRIVER - 0-10V H 3.00”; W 11.46”; D 1.30”
ELECTRONIC DRIVER - 0-10V Dims below 1% on most 0-10V dimmers
GG100-24-UNV
0-10 +
24V +
0-10 -
24V -
120 - 277 VAC
0 - 10 V CONTROLLER
VIOLET WIRE TO 0-10V CONTROLLER +
YELLOW WIRE TO LED +BLACK WIRE TO DC - OUTPUT OF DRIVER
RED WIRE TO DC + OUTPUT OF DRIVERBLUE WIRE TO LED -
GRAY WIRE TO 0-10V CONTROLLER -
FIELD INSTALLED IN LOW VOLTAGE WIRING COMPARTMENT
- Max number of 25 modules on one dimmer. Consult dimmer datasheet for maximum device limitation of a specific controller.
- Install DIM-010V Module in low voltage wiring compartment.
DIM-010V0-10V MODULE
FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018
11 of 14
COMPATIBLE DRIVERS
ELECTRONIC DRIVER W/DMX MODULE (DMX)
96W 120-277VAC ELECTRONIC DRIVER WITH eldoLED DMX
DIMMING MODULE
GG100E-24-UNV-DMX
DESCRIPTIONPART
*Must be installed in UL box (by others)
DIMENSIONS
DIMMING PERFORMANCE
96W H 3.00”; W 11.46”; D 1.30”
DMX MODULE H 1.97”; W 6.02”; D 0.91”
ELECTRONIC DRIVER - DMX MODULE Dims to 0.1% on most DMX systems
LED+CH1
GG100-24-UNV
120 - 277 VAC
FROM DMX CONTROLLER (BY OTHERS)
OUT TO NEXT MODULE
DMX MODULE®
24V DC+
24V DC-
DMX in +
LEDSync thru +LEDSync thru -
DMX in -DMX in shield
LEDSync shield
For more options to wire DMX module, reference DMX System cut sheet.
CH1LED+
FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018
12 of 14
DIMMER WITH NEUTRAL
DIMMER WITHOUT NEUTRAL
LUTRON HI-LUME® 1% 2-WIRE: 2-WIRE CONTROL FORWARD PHASE
5-40W, 120VAC, 2-WIRE FORWARD PHASE DRIVER
Dims to 1% with compatible Lutron controlsLUTRON HI-LUME® 1% 2-WIRE
LTEA4U1UKL-CV240
DESCRIPTIONPART
COMPATIBLE DRIVERS
DIMENSIONS
DIMMING PERFORMANCE
LUTRON HI-LUME® 1% 2-WIRE H 4.00”; W 4.89”; D 2.62”LUTRON HI-LUME®1% 2-WIRE
NEUTRAL-WIREDIMMER/MODULE/PANEL
FORWARD PHASE DIMMERWITHOUT NEUTRAL
LUTRON HI-LUME®1% 2-WIRE
24V DC -
24V DC -
24V DC +
24V DC +
LINE/HOTDIMMED LINE
(BLACK)
DIMMED LINE (BLACK)
NEUTRAL (WHITE)
NEUTRAL (WHITE)
NEUTRAL
LINE/HOT
NEUTRAL
NEUTRAL
Optic Arts is a Lutron OEM Advantage Partner
FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018
13 of 14
3-WIREDIMMER/MODULE/PANEL
3-WIRE
ECOSYSTEM
LUTRON HI-LUME® 1%: 3-WIRE/ECOSYSTEM
5-40W, 120-277VAC, 3-WIRE/ECOSYSTEM DRIVERL3DA4U1UKL-CV240
DESCRIPTIONPART
COMPATIBLE DRIVERS
DIMENSIONS
DIMMING PERFORMANCE
LUTRON HI-LUME® 1% 3-WIRE/ECOSYSTEM
H 4.00”; W 4.89”; D 2.62”
Dims to 1% with compatible Lutron controlsLUTRON HI-LUME® 1% 3-WIRE/ECOSYSTEM
LUTRON HI-LUME®1% 3-WIRE
LUTRON HI-LUME®1% 3-WIRE
24V DC -
24V DC +
LINE/HOT
TO ECOSYSTEM DIGITAL LINK
E1 (Purple)
E1 (Purple)
SWITCHED LINE(BLACK)
DIMMED LINE (ORANGE)
DIMMED LINE (ORANGE)
E2 (Purple)
E2 (Purple)
NEUTRAL (WHITE)NEUTRAL
LINE/HOT
NEUTRAL
NEUTRAL
24V DC -
24V DC +
Optic Arts is a Lutron OEM Advantage Partner
FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018
14 of 14
3-WIRE
ECOSYSTEM
LUTRON HI-LUME® PREMIER: 3-WIRE/ECOSYSTEM
COMPATIBLE DRIVERS
2-96W, 120-277VAC, 3-WIRE/ECOSYSTEM DRIVERL3D0-96W24V-U
DESCRIPTIONPART
DIMENSIONS
DIMMING PERFORMANCE
LUTRON HI-LUME® PREMIER H 5.5”; W 10.5”; D 2.0”
Dims to 0.1% with compatible Lutron controlsLUTRON HI-LUME® PREMIER
LUTRON HI-LUME®PREMIER DRIVER
LUTRON HI-LUME®PREMIER DRIVER
(WITH ECOSYSTEM CONTROL & SOFT-ON FADE TO BLACK TECHNOLOGY)
NOTE: Lutron soft-on, fade to black technology available with Ecosystem Digital Control only.
24V +
24V +
24V -
24V -
E1 (Purple)
SWITCHED LINE/HOT (L)
DIMMED HOT (DH)
E2 (Purple)TO ECOSYSTEM
DIGITAL LINK
120-277 VAC
3-WIREDIMMER/MODULE/PANEL
LINE/HOT
NEUTRAL
NEUTRAL
Optic Arts is a Lutron OEM Advantage Partner