VACCINATION DANGERS - The Health Hazards of Disease Prevention - BSEM-2011
Focus on Prevention: The Top Four Construction Hazards
description
Transcript of Focus on Prevention: The Top Four Construction Hazards
![Page 1: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/1.jpg)
Focus on Prevention: The Top Four Construction Hazards
State Building and Construction Trades CouncilFunded by Federal OSHA (2008)
![Page 2: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/2.jpg)
OSHA Grant Number
This material was produced under grant number SH16592-07-60-F6 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.
![Page 3: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/3.jpg)
Credits ─ Sources of Information
Center for Construction Research & Training (CPWR) Laborers International Union of North America U.S. Bureau of Labor Statistics (BLS) Cal/OSHA Federal OSHA Occupational Health Branch, California Dept. of Public
Health The Construction Institute Associated General Contractors
![Page 4: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/4.jpg)
Topics
The Construction Workforce Nationwide Fall Hazards Struck-by Hazards Electrical Hazards Caught-in/between Hazards
![Page 5: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/5.jpg)
The Construction Workforce Nationwide
![Page 6: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/6.jpg)
Three Times the Deaths
Nearly 6.5 million people work at approximately 252,000 construction sites in this country.
In 2003, construction workers were 7%
of the workforce and 21% of the workplace deaths.
![Page 7: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/7.jpg)
Immigrant Deaths on the Job
Between 1996-2000 the number of foreign-born workers increased by 22%.
The number of fatalities among these workers increased by 43%.
![Page 8: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/8.jpg)
Latinos Were 23% of All Construction Workers in 2005
Latinos as a percentage of construction occupations, 2003-05
![Page 9: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/9.jpg)
Latino Construction Deaths
Of the 1,226 construction deaths in 2005, 321 (26%) were among Latino workers.
![Page 10: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/10.jpg)
Non-English Speaking Workers
An estimated 4.5 million of California’s 17 million workers do not speak English.
Cal/OSHA has only 30 field inspectors able to speak a language other than English.
![Page 11: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/11.jpg)
California vs. Nationwide Construction Fatalities by Hazard
Other
46.1%
Struck-by Fatalities
11% Caught-in Fatalities
5%
Fatalities from Falls
30%
Electrical Fatalities
7.8%
Other
37.5%
Struck-by Fatalities
9.7%Caught-in Fatalities
7.7%
Fatalities from Falls
34.9%Electrical Fatalities
10.1%
United States 20061226 Total Fatalities
California 2005 102 Total Fatalities
![Page 12: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/12.jpg)
What Are the 4 Leading Causes of Death in Construction?
Falls Struck-by hazards Electrical hazards Caught-in/between hazards
![Page 13: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/13.jpg)
Focus Four OSHA Citations
85% of all citations and 90% of dollars in OSHA construction fines are related to the Focus Four hazards.
79% of all construction fatalities are related to the Focus Four hazards.
![Page 14: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/14.jpg)
Cal/OSHA’s High Hazard List in Construction
Foundation, Structure, and Building Exterior Contractors
Drywall and Insulation Contractors Finish Carpentry Contractors
![Page 15: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/15.jpg)
Fall Hazards
![Page 16: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/16.jpg)
Session Objectives
By the end of the sessionstudents will learn:
1) The four main causes of fall fatalities.2) How to prevent falls.3) How to use a personal fall protection
system.4) How to use ladders safely.
![Page 17: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/17.jpg)
What Occupations Have the Highest Death Rates From Falls?
Roofers Construction Laborers Painters Carpenters Ironworkers
![Page 18: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/18.jpg)
Falls Are Number One
Falls are the leading cause of construction fatalities.
Falls accounted for 34% of construction deaths nationwide in 2006.
Have you, or anyone you know, had a fall on the job? What happened?
![Page 19: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/19.jpg)
Ironworker Dies After Falling Off Beam (California Case Study)
Break into small groups.
Take 5-10 minutes to read the case study and discuss the question.
Report your answer back to the class.
![Page 20: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/20.jpg)
What Should Have Been Done to Prevent This Accident?
Investigators said employers should:
Require everyone working at heights to wear fall protection equipment.
Make sure openings are properly covered or otherwise protected.
If possible, provide alternate means of access to the work, such as an aerial lift (zoom boom).
![Page 21: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/21.jpg)
What Are The Main Causes of Fall Fatalities?
Unprotected sides and edges, roof and wall openings, and floor holes
Improper scaffold construction
Improper use of portable ladders
Falls from girders and structural steel
Unguarded protruding steel rebars
![Page 22: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/22.jpg)
Fatal Falls in Construction by Type
Causes of death from falls in construction, 1992-2005
![Page 23: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/23.jpg)
How Can Workers Be Protected From Falling Off an Edge?
![Page 24: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/24.jpg)
Protecting Workers From Falling Off an Edge
When workers are on a surface with an unprotected side or edge greater than 7.5 feet above the lower level, Cal/OSHA says employers must provide:
A guardrail system,
A safety net, or
A fall arrest system such as a lifeline and harness.
![Page 25: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/25.jpg)
Can You Catch Yourself If You Fall?
No!
The average person’s reaction time is half a second. In that time you fall 4 feet.
Gravity pulls you down and your speed quickly increases.
A person who weighs 200 pounds and falls 6 feet will hit the ground with almost 10,000 pounds of force.
Catching yourself during a fall only happens in the movies.
![Page 26: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/26.jpg)
What’s Wrong With This Picture?
![Page 27: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/27.jpg)
Unsafe Covers
Covers over openings must be properly marked, positively affixed, and capable of supporting twice the intended load.
Markings used should be understandable by all employees, including those who may not speak or read English.
![Page 28: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/28.jpg)
Working on Scaffolds
Scaffold deaths account for 9% of construction deaths.
About 1 in 5 of the fatal falls in construction are from scaffolds.
![Page 29: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/29.jpg)
Cal/OSHA Scaffold Requirements
Must be designed by a “qualified” person.
A “competent” person must inspect a scaffold before each shift and after anything happens that could affect the structure.
![Page 30: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/30.jpg)
More Scaffold Safety Requirements
Scaffolds must be at least 10 feet from energized power lines.
Must be able to support their own weight and at least 4 times the intended load.
Must have toeboards and guardrails.
![Page 31: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/31.jpg)
What’s Wrong With This Picture?
![Page 32: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/32.jpg)
Improper Scaffold Construction
No guardrails on sides or ends of scaffold.
No safe access to scaffold platforms. Platforms are not fully planked from
side to side.Missing toeboards.
![Page 33: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/33.jpg)
Steel Erectors
35 ironworkers die each year during steel erection.
Fall arrest systems for steel erectors are
difficult to set up.
![Page 34: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/34.jpg)
Cal/OSHA’s Steel Erection Standard
All steel erection employees (except connectors) working on an unprotected side or edge more than 15 feet high must use fall protection.
Connectors must use fall
protection when working two stories or 30 feet above a lower level.
![Page 35: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/35.jpg)
Then … and Now
![Page 36: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/36.jpg)
What’s Wrong With This Picture?
![Page 37: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/37.jpg)
Not Wearing Fall Protection on Roof Truss
Man on truss is not using fall protection.
Cal/OSHA requires fall protection when employees are walking or working on top plates, joists, rafters, trusses, beams, or similar structural members over 15 feet above the grade or floor level below.
![Page 38: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/38.jpg)
What’s Wrong With This Picture?
![Page 39: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/39.jpg)
Protruding Rebar Hazards
Guard all protruding ends of steel rebar with rebar caps or wooden troughs, or
Bend rebar so exposed ends are no longer upright.
When working above
exposed rebar, fall protection/ prevention is your best defense against impalement.
![Page 40: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/40.jpg)
What’s the Best Way to Prevent Falls?
![Page 41: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/41.jpg)
Methods of Fall Protection
What is the difference between fall protection and fall arrest?
![Page 42: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/42.jpg)
Fall Protection vs. Fall Arrest
Fall protection keeps workers, tools, or materials from falling off, onto, or through working levels. Examples are guardrails and hole covers.
Fall arrest catches workers, tools, or materials after they have fallen, before they strike a lower level.Examples are safety net systems and personal fall protection systems.
![Page 43: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/43.jpg)
Guardrail Systems
![Page 44: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/44.jpg)
Safety Nets
![Page 45: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/45.jpg)
Personal Fall Protection Systems (PFP)
Employer must fit and train each worker about PFPs.
A “competent” person must train workers about types of fall hazards, how to protect yourself, and limitations of PFPs.
![Page 46: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/46.jpg)
What Are The Components of a Personal Fall Protection System?
Body harness
Lanyard and connectors
D-ring
Anchorage point
![Page 47: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/47.jpg)
Training for Fall Arrest Systems
Required training should include:
An explanation of the company’s fall protection policies and systems
Selection and proper use of Fall Arrest Systems and related equipment.
![Page 48: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/48.jpg)
Why Don’t Workers Like To Wear Personal Fall Protection Equipment?
![Page 49: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/49.jpg)
Ladder Accidents
Each year, about 50 construction workers are killed by falls from ladders.
Most deaths happen from 10 feet or lower.
Twice as many falls occur when stepping down ladders than when going up ladders.
The main cause of falls from straight and extension ladders is the ladder sliding off its base.
![Page 50: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/50.jpg)
What’s Wrong With This Picture?
![Page 51: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/51.jpg)
Unsafe Ladder Use
Don’t work on the top steps or rungs of ladders.
Position portable ladders so the side rails extend at least 3 feet above the landing.
Secure side rails at the top to a rigid support and use a grab device when 3-foot extension is not possible.
Make sure that the weight on the ladder will not
cause it to slip off its support.
![Page 52: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/52.jpg)
How Do You Use a Ladder Safely?
Make sure the ladder is on a firm level surface.
Always face the ladder when going up or down.
Maintain three-point contact at all times.
Don’t carry anything in your hands.
Secure the ladder at top and bottom.
Never over-reach to get at something off to one side.
![Page 53: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/53.jpg)
View DVD: Don’t Fall for It
![Page 54: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/54.jpg)
Fall Prevention Summary
Cal/OSHA requires fall protection on a surface with an unprotected side or edge greater than 7.5 feet above a lower level.
Fall prevention: keeps workers from falling (guardrails and hole covers
Fall arrest: catches workers after they have fallen (personal fall arrest systems and safety nets)
![Page 55: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/55.jpg)
Fall Prevention Summary (cont’d)
Floor openings must be covered, labeled, and covers should support twice the load.
Scaffolds must be designed by a “qualified” person and inspected before each shift by a “competent” person.
Set ladders at 4:1 height-to-base ratio, and climb using 3-point contact.
![Page 56: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/56.jpg)
Fall Prevention: Tips and Feedback
Class Brainstorm What tips do you have
to help prevent falls on the job?
What is your employer already doing to help prevent falls?
What else do you think should be done?
![Page 57: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/57.jpg)
Struck-by Hazards
![Page 58: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/58.jpg)
Session Objectives
By the end of the sessionstudents will learn:
1) The three main causes of struck-by fatalities.
2) How to prevent struck-by fatalities.3) How to use powder-actuated tools safely.
![Page 59: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/59.jpg)
Struck-by Hazards Are Number Two
The second leading cause of construction fatalities is being struck by an object.
Approximately 75% of struck-by fatalities involve heavy equipment.
One in four “struck-by-vehicle” deaths involve construction workers, more than any other occupation.
![Page 60: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/60.jpg)
What Are The Main Causes of Struck-by Deaths?
Vehicle and Roadway Hazards
Falling Objects Flying Objects
Have you, or anyone you know, had an accident from a struck-by hazard on the job? What happened?
![Page 61: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/61.jpg)
Construction Laborer Run Over by Front-End Loader (California Case Study)
Break into small groups.
Take 5-10 minutes to read the case study and discuss the question.
Report your answer back to the class.
![Page 62: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/62.jpg)
What Should Have Been Done to Prevent This Accident?
Investigators said employers should make sure:
Workers keep out of the immediate area where heavy equipment is operating.
When visual contact is lost with workers on foot, the equipment operator stops the equipment until contact is re-established.
Equipment has a working back-up alarm.
There is a written code of safe practices for all hazards.
Workers are adequately trained.
![Page 63: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/63.jpg)
What Are the Leading Causes of Highway Worker Fatalities?
For highway workers on foot, the leading cause of fatalities is being struck by construction equipment.
For highway equipment operators, the most common cause of fatalities is equipment rollover.
![Page 64: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/64.jpg)
What Precautions Should You Take Around Moving Vehicles or Equipment?
Stay clear of vehicles, and know the traffic control plan.
Communicate with operators by radio and/or eye contact.
Stay out of "blind spots."
Wear a reflective or high-visibility vest.
Don’t stand under loads.
![Page 65: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/65.jpg)
What Should the Employer Do?
Have a traffic control plan.
Set up barricades and warning signs.
Assign spotters and/or flaggers.
Equip vehicles with rear vision cameras and radar systems to detect workers.
![Page 66: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/66.jpg)
What’s Wrong With This Picture?
![Page 67: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/67.jpg)
Out of Driver’s Line of Sight
This worker is in the driver’s blind spot. There is no spotter. Worker is not wearing an orange or red vest.
One in four "struck by vehicle" deaths involve construction workers, more than any other occupation.
![Page 68: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/68.jpg)
How Can You Be Struck by Falling Objects?
Working under cranes or scaffolds
Rigging failure Loose or shifting
materials Lack of overhead
protection. How can you be
protected from falling objects?
![Page 69: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/69.jpg)
Protection Against Falling Objects
Wear a hard hat. Secure all loads, tools,
and materials. Use toeboards. Use debris nets, catch
platforms, or canopies. Never walk or work
below moving objects overhead, like concrete buckets.
![Page 70: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/70.jpg)
What’s Wrong With This Picture?
![Page 71: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/71.jpg)
Falling Object Hazards in the Picture
Scaffold is constructed improperly.
Workers could get struck by objects falling off the scaffolding because there is no toeboard.
No hardhats or safety glasses.
![Page 72: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/72.jpg)
What Are “Flying Object” Hazards?
Tools can create particles when chipping, grinding, sawing, brushing, or hammering.
Particles from some tools move at amazing speed and can hit with the force of a bullet, like those from pneumatic and powder-actuated tools.
How can you be protected from flying objects?
![Page 73: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/73.jpg)
Protection From Flying Objects
Wear eye protection.
Inspect tools before use.
Make sure you are properly trained before using a power tool.
![Page 74: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/74.jpg)
Powder-Actuated Tools
What do you think happened here?
![Page 75: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/75.jpg)
How Should You Use Powder-Actuated Nail Guns Safely?
Get training – it’s required!
Always wear safety glasses and hearing protection.
Never disable safety devices such as sequential triggers, guards, or bumpers.
Never point the tool at a person, and point it away from you when nailing. Always assume it’s loaded.
Always disconnect the tool before clearing jams or doing tool maintenance.
![Page 76: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/76.jpg)
What’s Wrong With This Picture?
![Page 77: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/77.jpg)
Improper Use of Nail Gun
The carpenter is firing a nail toward himself.
He has no protective equipment like a hardhat and safety glasses.
He doesn’t seem to be using hearing protection.
![Page 78: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/78.jpg)
Struck-by Hazards Summary
Use caution around vehicles and equipment, maintain eye contact with operators, and wear high-visibility gear. Backing vehicles should use spotters.
Don’t stand under loads.
Wear a hard hat and use toeboards to deflect falling objects.
Wear eye protection and inspect tools before use to avoid flying objects.
Don’t use powder-actuated tools unless you are trained and certified for each tool you use.
![Page 79: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/79.jpg)
Struck-by Hazards: Tips and Feedback
Class Brainstorm What tips do you have
to help prevent struck-by accidents on the job?
What is your employer already doing to help prevent struck-by accidents?
What else do you think should be done?
![Page 80: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/80.jpg)
Electrical Hazards
![Page 81: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/81.jpg)
Session Objectives
By the end of the sessionstudents will learn:
1) The five main causes of electrocutions.2) How to prevent injury and death from
electrical hazards.3) What to do if a co-worker gets shocked.
![Page 82: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/82.jpg)
What Are The Main Causes of Electrocutions? Contact with Overhead Power
Lines Contact with Live Circuits Poorly Maintained Power
Cords Improper Use of Power Tools
Have you, or anyone you know, been injured by an electrical hazard on a construction site? What happened?
![Page 83: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/83.jpg)
Electrical Hazards Can Be Killers
In California, about 8% of construction fatalities are from electrocutions.
Nationwide, electrical hazards cause 12% of deaths on the job for younger workers.
Workers can even be killed by ordinary household current.
![Page 84: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/84.jpg)
Laborer Electrocuted By Energized Crane (California Case Study)
Break into small groups.
Take 5-10 minutes to read the case study and discuss the question.
Report your answer back to the class.
![Page 85: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/85.jpg)
What Should Have Been Done to Prevent This Accident?
Investigators said employers should:
Give workers information on what hazards to look for and how to avoid them.
Have strict safety procedures when working with a crane near high voltage power lines.
Contact the local electric power company and have the power turned off when working within a certain distance of high voltage power lines.
![Page 86: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/86.jpg)
Death from Electrical Hazards
Causes of electrocution deaths among non-electrical construction workers, 2003-05
![Page 87: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/87.jpg)
Effects of Electricity
Estimated Effects of AC Currents (U.S. Standard 60 Hz)
1 milliamp (mA)
Barely perceptible
16 mA Maximum current an average man can grasp and “let go”
20 – 30 mA Paralysis of respiratory muscles
100 mA Ventricular fibrillation threshold
2 Amps Cardiac standstill and internal organ damage
15/20/30 Amps
Common U.S. household breakers
PATH: Harm is related to the path by which current passes through the body.
![Page 88: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/88.jpg)
Working Around Power Lines
Overhead power lines carry extremely high voltage.
Electrocution, burns, and falls from elevations are concerns for workers.
Contact with power lines can also cause explosions and fire.
![Page 89: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/89.jpg)
What Equipment Might Contact Power Lines?
Crane Ladder Scaffold Backhoe Scissors lift Raised dump truck bed
![Page 90: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/90.jpg)
Power Line Facts
Overhead lines are typically not insulated.
Equipment operators are normally safe when equipment accidentally touches a power line if they stay inside their equipment.
Workers on the ground who come in contact with power lines are 8 times more likely to be killed than workers inside equipment or vehicles.
![Page 91: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/91.jpg)
How Can You Work Around Overhead Power Lines Safely?
Locate overhead lines before starting the job.
Keep equipment at least10 feet away.
Assume that lines are energized.
De-energize and ground lines when working nearby.
Use wood or fiberglass ladders near power lines.
![Page 92: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/92.jpg)
Contact with Live Circuits
![Page 93: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/93.jpg)
What’s Wrong With This Picture?
![Page 94: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/94.jpg)
Missing Ground Prong
Extension cord has a missing grounding prong.
If the power supply is not grounded or the path to ground has been broken, live current may travel through a worker's body causing electrical burns or death.
![Page 95: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/95.jpg)
What Does This Do?
![Page 96: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/96.jpg)
Ground-fault Circuit Interrupter (GFCI)
Protects you from shock
Detects difference in current between the hot and neutral wires (including a ground fault)
If a ground fault is detected, the GFCI shuts off electricity in 1/40th of a second
Use GFCIs on all 120-volt, single-phase, 15-and 20-ampere receptacles.
![Page 97: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/97.jpg)
What’s Wrong With This Picture?
![Page 98: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/98.jpg)
Improper Cord Use
These cords are improperly wired directly to the electrical circuit.
Not protected by a GFCI.
Two-wire cords are not grounded and not rated for hard or extra-hard service.
![Page 99: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/99.jpg)
What’s Does This Tell Us?
![Page 100: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/100.jpg)
How Can You Use Power Tools Safely?
![Page 101: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/101.jpg)
Power Tool Tips
Keep cords away from water, heat, oil, and sharp edges.
Disconnect tools when not in use, before servicing, and when changing accessories such as blades, etc.
Use double-insulated tools. Stop using any power tool that is wet,
overheating, smoking, starting to smell, or if you feel a tingle or shock.
![Page 102: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/102.jpg)
What Should You Do If Someone Gets Shocked?
Call 911. Do not touch the worker in
contact with electric current. You could get shocked too.
Turn off the power or use nonconductive material (like a wooden stick) to remove him/her from the power source.
Start CPR or other first aid.
![Page 103: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/103.jpg)
Electrical Hazards Summary
Contact with power lines causes the most electrocutions. Stay at least 10 feet away.
Use GFCIs for protection.
Make sure power is off when servicing or repairing tools and equipment.
Inspect all electrical tools before use. Do not touch a worker in contact with electric
current. Use nonconductive material like a wooden stick to move him/her.
![Page 104: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/104.jpg)
Electrical Hazards: Tips and Feedback
Class Brainstorm What tips do you have to
help prevent electrical accidents on the job?
What is your employer doing to help prevent electrical accidents?
What else do you think should be done?
![Page 105: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/105.jpg)
Caught-in/between Hazards
![Page 106: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/106.jpg)
Session Objectives
By the end of the sessionstudents will learn:
1) The three main causes of caught-in/between fatalities.
2) How to prevent caught-in/between deaths.3) How to prevent equipment roll-overs.
![Page 107: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/107.jpg)
What Are The Main Causes of Caught-in/between Deaths?
Being crushed by collapsing materials, such as in a trench or excavation.
Being caught in, or between, machinery or equipment.
Equipment rollover.
![Page 108: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/108.jpg)
5% of All Construction Fatalities
Caught-in/between deaths represent about 5% of construction fatalities.
Have you, or anyone you know, been injured working in a trench? What happened?
![Page 109: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/109.jpg)
Plumber Dies When Trench Collapses (California Case Study)
Break into small groups.
Take 5-10 minutes to read the case study and discuss the question.
Report your answer back to the class.
![Page 110: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/110.jpg)
What Should Have Been Done to Prevent This Accident?
Investigators said employers should make sure:
• Workers don’t enter trenches deeper than 5’ without shoring, benching, or sloping.
• Backhoe operators place excavated soil (spoil) from trenches at least 2’ from the edge of the trench.
• Workers get safety training before they are assigned hazardous work.
![Page 111: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/111.jpg)
Why Are Trenches Dangerous?
Most deaths from cave-ins occur in trenches 5 to 15 ft. deep.
Cave-ins happen suddenly with no warning.
Other risks: falls, electrocution, being struck by falling objects (or equipment), and bad air.
Bad air can make it hard to breathe, help cause a fire, or poison you.
![Page 112: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/112.jpg)
Think You Can Run?
If a trench collapses, why not just run out of the way?Soil falls too fast.
Guess how fast it falls from a height of:2 feet? 4 feet? 6 feet?Click your choice.
![Page 113: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/113.jpg)
From Two Feet …
It takes only 0.35 seconds for soil to fall two feet.
Human reaction time is about 0.50 seconds.
There’s no time to escape.
Go Back Continue
![Page 114: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/114.jpg)
From Four Feet …
It takes only 0.50 seconds for soil to fall four feet.
Human reaction time is about 0.50 seconds.
There’s no time to escape.
Go Back Continue
![Page 115: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/115.jpg)
From Six Feet …
It takes only 0.61 seconds for soil to fall six feet.
Human reaction time is about 0.50 seconds.
In this example, it would take a worker another 0.11 seconds to reach the ladder after reacting. There’s no time to escape.
Go Back Continue
![Page 116: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/116.jpg)
How Much Does Soil Weigh?
OK, the trench has collapsed. A little bit of soil can’t weigh that much, right? Maybe you could dig out?
Wrong! Assume you’re buried three feet deep. A cubic yard of soil is pressing on you. How much do you think a cubic yard weighs?
![Page 117: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/117.jpg)
Up to Two Tons!
A cubic yard of wet excavated clay weighs 3078 lbs.
A cubic yard of wet sand and gravel weighs 3375 lbs.
A cubic yard of sandstone weighs 3915 lbs. That’s almost two tons!
![Page 118: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/118.jpg)
Weight of a Truck
Two tons is almost the weight of a small pickup truck.
Try to breathe or move with this weight on your arms, chest, and face.
You can’t!
![Page 119: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/119.jpg)
What Causes Trench Deaths?
No protective system (like shoring) is in place.
Trenches and excavations are not properly or regularly inspected.
Excessive weight, such as machinery and spoil, is close to the edge of the excavation.
No safe means is available to get in and out of the trench.
![Page 120: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/120.jpg)
What Must an Employer Do to Make a Trench Safe?
Cal/OSHA says your employer must train workers about trench hazards and how to protect themselves.
Employer must name a “competent” person before a trench is dug.
![Page 121: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/121.jpg)
What Should You Do Before You Work In a Trench?
Make sure the contractor has marked all utilities before digging.
Make sure the competent person say it’s OK to work in.
Make sure equipment, like water pumps and ventilators, are in good condition.
Make sure there is a ladder within 25’ so you can get in and out.
If bad air is expected, make sure there is a rescue plan.
![Page 122: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/122.jpg)
How Can Cave-Ins Be Prevented?
Trenches 5 feet or deeper require support, unless they are in solid rock.
Excavations 5 feet or deeper require a permit from
Cal/OSHA if workers will be entering them.
The type of trench protection depends on the type of soil, and only a competent person can classify soil.
![Page 123: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/123.jpg)
What Are The Four Basic Ways To Support A Trench?
Sloping Benching Shoring Shielding
![Page 124: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/124.jpg)
Sloping
Soil angled to increase stability
![Page 125: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/125.jpg)
Benching
Steps in trench wall
![Page 126: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/126.jpg)
Shoring
A support system made of posts, wales, struts, and sheeting. Hydraulic shoring systems are also available.
![Page 127: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/127.jpg)
Shielding
A protective frame or box is used as a trench shield system.
![Page 128: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/128.jpg)
Entering and Leaving a Trench
There must be a stairway, ladder, or ramp in excavations 4’ or more deep.
It must be within 25’ of the workers.
Ladder should extend 3’ above the top of the trench.
![Page 129: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/129.jpg)
What’s Wrong With This Picture?
![Page 130: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/130.jpg)
Unsafe Trench
There is no shoring. We can’t see if there is a way to safely enter
or leave the trench. Backhoe should not be on top of the trench—
this is an example of an unsafe “spoil pile.”
![Page 131: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/131.jpg)
What’s Wrong With This Picture?
![Page 132: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/132.jpg)
Trenching Box Is Too Low
The trench box should extend 18 inches above the top of the trench so equipment and soil don’t fall back into the trench.
Ladders should be placed so that no worker is more than 25’ from an exit.
The backhoe is too close to the edge of the trench. Its weight might cause a cave-in.
![Page 133: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/133.jpg)
What’s Wrong With This Picture?
![Page 134: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/134.jpg)
Hazardous Trench
This trench has:inadequate slopingno shoringno trench shield
![Page 135: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/135.jpg)
Excavation Rescue
Excavation rescue must be done carefully because rescue operations might:– cause additional cave-ins– create more soil pressure
on buried victim– injure the victim more
severely.
![Page 136: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/136.jpg)
What Are Some Other Caught-in/between Hazards?
Caught-in machinery or mechanical equipment
Pinned between equipment and a solid object (wall or equipment)
Equipment service and maintenance
Rollovers
![Page 137: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/137.jpg)
What Are Examples of Mechanical or Moving Equipment?
Saws Presses Conveyors Bending, rolling, or shaping machines Powered hand tools Forklifts
![Page 138: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/138.jpg)
How Can Workers Be Protected From Moving Parts or Equipment?
![Page 139: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/139.jpg)
Machine Guards
![Page 140: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/140.jpg)
What Other Precautions Should You Take When Servicing or Repairing Equipment?
![Page 141: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/141.jpg)
Lockout/blockout
Cal/OSHA says that employers should:
• Set up a written lockout/ blockout program to make sure equipment is disconnected and locked before it is repaired.
• Train you to use the program.
![Page 142: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/142.jpg)
Rollovers
Have you, or anyone you know, experienced a vehicle or equipment rollover?
What happened?
![Page 143: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/143.jpg)
What Can You Do to Prevent Rollovers?
Don’t work parallel to steep grades, embankments, or unstable soil.
Use equipment with a ROPS, and fasten the seatbelt.
If rolling over, don’t jump out if the vehicle has a ROPS and seatbelt.
You have a better chance to ride it out with a ROPS and your seat belt fastened.
![Page 144: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/144.jpg)
What Happened Here?
![Page 145: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/145.jpg)
Caught-in/between Hazards Summary
Trench protection is required for 5 ft. deep or more Methods of trench protection – sloping, benching,
shoring, shielding Trench inspections must be conducted by a competent
person Only those who are trained and equipped should
perform trench rescues Use lockout/blockout procedures when servicing or
repairing machines Use heavy equipment that has a ROPS and fasten the
seatbelt.
![Page 146: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/146.jpg)
Caught-in/between Hazards: Tips and Feedback
Class Brainstorm What tips do you have to help
prevent accidents from being caught-in/ between moving equipment on the job?
What is your employer already doing to prevent these accidents?
What else do you think should be done?
![Page 147: Focus on Prevention: The Top Four Construction Hazards](https://reader036.fdocuments.net/reader036/viewer/2022062816/5681638c550346895dd47eca/html5/thumbnails/147.jpg)
You’ve Come A Long Way! But We Still Have a Ways to Go…