FOAM-CONTROL EPS EXPANDED POLYSTYRENE€¦ · Foam-Control® EPS means control, not compromise....
Transcript of FOAM-CONTROL EPS EXPANDED POLYSTYRENE€¦ · Foam-Control® EPS means control, not compromise....
CONTROL, NOT COMPROMISE.
FOAM-CONTROL EPS
EXPANDED POLYSTYRENE
Materials. Labor. Costs. Foam-Control® EPS means control, not compromise.
Foam-Control EPS building products are engineered to give
you the greatest possible control for your project application:
from design and timelines, to materials and costs, and—
ultimately—control over your results. The advantages to using
Foam-Control EPS products include:
• State-of-the-art insulation and energy efficiency
• Variety of density, thickness, size
• UL QA monitored, tested, certified, listed
• Unlimited fabrication possibilities
• Building code recognized
• Warranted R-value
• Perform Guard® termite protection available
• Cost effective
• Long-lasting, strong, and stable
• Contains no CFC, HCFC, HFC, or formaldehyde
• Recyclable
Foam-Control EPS is a lightweight yet strong material that
gives architects, designers and builders the freedom and
confidence to turn their visions into reality.
This looks like a job for expanded polystyrene.
In the construction industry, Foam-Control EPS is among
the most versatile, energy efficient, and cost effective
insulators available, delivering extremely high, stable
R-values. Depend on Foam-Control EPS to do the job—
practically any job—from the ground up: perimeter
foundation and underslab insulation, wall sheathing, EIFS
insulation, roof insulation, concrete insulation/void filler,
ICF insulation, Geofoam and just about any construction
application you can imagine.
Stands up to the elements, yet it’s good for the environment.
Cost effective thermal design is among the highest priorities
in construction. Foam-Control EPS insulation products are
available in a range of densities necessary to provide energy
efficiency, structural integrity, and cost effectiveness. They’re
proven to lower energy costs, saving both money and precious
resources.
Foam-Control EPS, when used as a component in an
engineered building system, helps to resist some of the
toughest conditions nature can deliver, like rain, snow,
wind, dust, heat and cold.
Proven to meet, or exceed, building codes.
Foam-Control EPS is manufactured
to Quality Control Program standards
monitored by UL and recognized by
national building codes.
Foam-Control EPS manufacturers offer product warranties
that ensure termite resistance, physical properties, and thermal
performance. Foam-Control EPS can stand up to all industry
tests—and has. No other EPS can say that.
Foam-Control EPS with Perform Guard.
One of the most destructive forces anywhere is termites.
Foam-Control EPS products can be manufactured with
Perform Guard, a proven and safe additive. that effectively
resists termites.
With Foam-Control EPS, you’re the master of your materials.
FROM FROST LINE TO ROOF LINE, YOU’RE IN CONTROL WITH FOAM-CONTROL EPS.
CONTROL YOUR COSTS. CONTROL YOUR DENSITY. CONTROL YOUR SHAPE. CONTROL YOUR SIZE. CONTROL YOUR THICKNESS. CONTROL YOUR SQUARENESS. CONTROL YOUR MATERIALS. CONTROL YOUR R-VALUE. CONTROL YOUR LIABILITY. CONTROL YOUR SQUA-
Concrete Insulation/Void FillGeofoam
DON’T COMPROMISE YOUR QUALITY. DON’T COMPROMISE YOUR ENERGY EFFICIENCY. DON’T COMPROMISE YOUR STRUCTURAL INTEGRITY. DON’T COMPROMISE YOUR PROFITABILITY. DON’T COMPROMISE YOUR DESIGN. DON’T COMPROMISE YOUR REPUTATION. DON’T
Wall Specification Perimeter InsulationRoof Insulation
It’s more than a foam. It’s a family.
When you choose Foam-Control EPS, you’re not sending your
order off to some mysterious factory. You’re collaborating with
a team of experts who work with you every step of the way.
We’re here to answer your questions, solve your problems,
and do everything we can to make sure your project proceeds
smoothly—and ends successfully.
Foam-Control EPS products are manufactured by a network
manufacturers throughout North America and the world.
Foam-Control facilities adhere to strict, consistent standards
to ensure uniformly high-quality EPS products.
This network allows us to offer architects, designers and
builders the best of both worlds: the resources of the
country’s largest provider of EPS insulation products and
systems, and the superior attention and customer service
of a local supplier.
Ready to take control? Start here.
If you’re starting to wonder how Foam-Control EPS can
contribute to your next project, here’s how to find out: Just
contact your nearest Foam-Control EPS manufacturer. They’ll
be happy to give you a design consultation, information
about Foam-Control EPS products, pricing, and the answers
to all your questions. Contact a sales rep, and download
Foam-Control EPS documentation, through our web site at
www.foam-control.com.
Foam face-off: Choosing EPS expanded polystyrene over XPS extruded polystyrene.
• Can easily vary the thickness and
density of EPS for different uses
• EPS is less-expensive
than XPS foam
• EPS is more easily molded into
different shapes
• EPS allows for more design possibilities
• Foam-Control EPS with
available to provide resistance to termites
CONTROL, NOT COMPROMISE.
CONTROL YOUR COSTS. CONTROL YOUR DENSITY. CONTROL YOUR SHAPE. CONTROL YOUR SIZE. CONTROL YOUR THICKNESS. CONTROL YOUR SQUARENESS. CONTROL YOUR MATERIALS. CONTROL YOUR R-VALUE. CONTROL YOUR LIABILITY. CONTROL YOUR SQUA-
DON’T COMPROMISE YOUR QUALITY. DON’T COMPROMISE YOUR ENERGY EFFICIENCY. DON’T COMPROMISE YOUR STRUCTURAL INTEGRITY. DON’T COMPROMISE YOUR PROFITABILITY. DON’T COMPROMISE YOUR DESIGN. DON’T COMPROMISE YOUR REPUTATION. DON’T
Under-slab InsulationPerimeter Insulation Wall Sheathing Insulating Concrete Forms SIPs
CONTROL, NOT COMPROMISE.
CONTROL YOUR:
• MATERIALS
• R-VALUES
• PROCESS
• COSTS
• TIMELINE
• LIABILITY
DON’T COMPROMISE YOUR:
• DESIGN
• ENERGY EFFICIENCY
• STRUCTURAL INTEGRITY
• PROFITABILITY
• QUALITY
• REPUTATION
Foam-Control EPS products are manufac-tured by AFM Corporation licensees.
Copyright © 2014 AFM Corporation. All rights reserved. Printed in USA. Foam-Control, Perform Guard, and Control, Not Compromise are registered trademarks of AFM Corporation, Lakeville, MN.
ICC ES logo is a registered trademark of ICC Evaluation Service, Inc.
UL logo is a registered trademark of UL LLC.
USGBC logo is a registered trademark of U.S. Green Building Council.
FC01-12/14
For further information about
Foam-Control EPS
visit www.achfoam.com