FMC(Z) cartridge filterCompact cartridge filter equipped with explosion membranes for solving combustible dustproblems within a wide range of industries.

The FMCZ200 filter is a compact cartridge filter equipped withexplosion membranes. The filter is ideal for solving dust problemswithin a wide range of industries where there is dust with a potentialexplosion hazard (St1, St2 or St3 dust up to KSt-value = 600bar*m/s). The filter is designed for an outdoor location.The FMCZ200 filter is designed for explosive dust and contains atype certificate by a Notified Body under the ATEX directive. Thecertificate identifies the interior raw gas section of the filter as zone20 and the interior clean gas section as zone 22. The filter allows apred,max up to 0,3 bar.

• Antistatic cartridges mandatory: CA 140• Inspection and change of the filter cartridges can take place

within a few minutes.• Front service of the cleaning valves, the controller, the

compressed air tank and the filter cartridges.• Intelligent ECO-efficient filter controller minimize maintenance

and energy costs.• Quick release waste bin

Product name FMC(Z) cartridge filterCompressed air requirement 6 barCompressed air consumption 45 Nl per cleaning pulseMaterial Housing in galvanised sheet

steel (2mm)Suitable for combustible dust TrueFilter cleaning method Pulse jetApplication Fumes, DustWorking pressure (kPa) -6,0 to 1,5. Operation of the filter

with overpressure only allowed ifit is a silo top version.

Dustbin volume (l) 50 or 100 or withoutCapacity (max airflow m3/h) 21000Operating Temperature -20 to 70 Deg. C.Filter type Cartridge

Fumes Dust

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 1 28-04-2019

FMC(Z) cartridge filter

Description Number of filter elements Filter material ModelFMCZ 200-2L 8 Polyester (std) FMC(Z)200-2LsFMCZ 200-2L 8 Cellulose FMC(Z)200-2LcFMCZ 200-4L 16 Polyester (std) FMC(Z)200-4LsFMCZ 200-4L 16 Cellulose FMC(Z)200-4LcFMCZ 200-6L 24 Polyester (std) FMC(Z)200-6LsFMCZ 200-6L 24 Cellulose FMC(Z)200-6LcFMCZ 200-8L 32 Polyester (std) FMC(Z)200-8LsFMCZ 200-8L 32 Cellulose FMC(Z)200-8LcFMCZ 200-2A 8 Polyester (std) FMC(Z)200-2AsFMCZ 200-2A 8 Cellulose FMC(Z)200-2AcFMCZ 200-4A 16 Polyester (std) FMC(Z)200-4AsFMCZ 200-4A 16 Cellulose FMC(Z)200-4AcFMCZ 200-6A 24 Polyester (std) FMC(Z)200-6AsFMCZ 200-6A 24 Cellulose FMC(Z)200-6AcFMCZ 200-8A 32 Polyester (std) FMC(Z)200-8AsFMCZ 200-8A 32 Cellulose FMC(Z)200-8Ac

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 2 28-04-2019

FMC(Z) cartridge filter

Accessory Part No

Damper type NFUS3 5501395

Discharge bin 50 l with wheels 5501274

Discharge bin 50 l without wheels 5501273

Discharge bin 100 l with wheels 5501275

Adaptor for bin with bag 5505033

Adaptor for 50 l bin with bag incl. fitting 5505034

Adaptor for 100 l bin with bag incl. Fitting 5505035

Hose set for bin balancing 5505041

Single backpack for 4 modules 5509660

Single backpack for 4 modules round inlet from the top 5501138

Single backpack for 8 modules round inlet from the top pos L 5501169

Double backpack for 4 modules 5509661

Double backpack for 4 modules round inlet from the top 5501142

Double backpack for 8 modules and round inlet from the top 5501175

DUAL silencer for FM600 series fan with air grille 5501813

DUAL silencer for FM6800 series fan with air grille 5501830

DUAL silencer for FM1000 series fan with air grille 5501854

DUAL silencer for FM600 series fan with air grille and rain cover 5501814

DUAL silencer for FM6800 series fan with air grille and rain cover 5501832

DUAL silencer for FM1000 series fan with air grille and rain cover 5501855

DUAL silencer for FM600 series fan with flanged outlet for duct connection 5501815

DUAL silencer for FM6800 series fan with flanged outlet for duct connection 5501833

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 3 28-04-2019

FMC(Z) cartridge filter

Accessory Part No

DUAL silencer for FM1000 series fan with flanged outlet for duct connection 5501856

Isolation box for FM pressure tank, 2 modules 5501317

Isolation box for FM pressure tank, 4 modules 5501318

Isolation box for FM pressure tank, 6 modules 5501319

Isolation box for FM pressure tank, 6 modules 5501320

Level sensor with beacon, 230V 5504475

Cable gland M40 for levelsensor 5512245

Noise enclosure for FM800 fan 5501783

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 4 28-04-2019

FMC(Z) cartridge filter

* Max. Air flow is dependent on the actual dust type.** Max. extra possible relieved volume (for St1 dust), when FMCZ200 silo version is mounted directly on a silo. (Attention: this is only an examplewith system L/D = 1, pred,max = 0,3 bar - special calculation is required for every case).

Standard explosion vents 410x410.

Filter body and hopper :St1, Kst = max.200 bar x m/s and Pmax = 9 bar.St2, Kst = max.300 bar x m/s and Pmax = 9 bar.St3, Kst = max.600 bar = special order.When ordering please specify:• Dust characteristics Kst and Pmax.• Zone-rating of place for installation(Non-zone or Zone 22)

Marking• The St1 version is marked EX II D St1.• The FMCZ200 filter body in the St2 version ismarked: EX II D St2.• The marking is based on product certificationby FTZU No. 1026

FMC200-2L and 2A with bin for discharge

All dimensions in mm.If 50 liter bin with rollers, add 90 mm.* 65 mm to be included at top mounted fan.

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 5 28-04-2019

FMC(Z) cartridge filter

FMC200–2L and 2A hopper with flange for discharge

All dimensions in mm.* 65 mm to be included at top mounted fan.

FMC200-4L and 4A with bin for discharge

All dimensions in mm.If 50 liter bin with rollers, add 90 mm.* 65 mm to be included at top mounted fan.

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 6 28-04-2019

FMC(Z) cartridge filter

FMC200–4L and 4A hopper with flange for discharge

All dimensions in mm.* 65 mm to be included at top mounted fan.

FMC200-6L and 6A with bin for discharge

All dimensions in mm.If 50 liter bin with rollers, add 90 mm.* 65 mm to be included at top mounted fan.

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 7 28-04-2019

FMC(Z) cartridge filter

FMC200–6L and 6A hopper with flange for discharge

All dimensions in mm.* 65 mm to be included at top mounted fan

FMC200-8L and 8A with bin for discharge

All dimensions in mm.If 50 liter bin with rollers, add 90 mm.* 65 mm to be included at top mounted fan.

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 8 28-04-2019

FMC(Z) cartridge filter

FMC200–8L and 8A hopper with flange for discharge

All dimensions in mm.* 65 mm to be included at top mounted fan.

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 9 28-04-2019