FM3 Family of Ethernet-Enabled and Compact Low-Leak ... · MB9BFD10 Series: With 2-ch Ethernet,...
Transcript of FM3 Family of Ethernet-Enabled and Compact Low-Leak ... · MB9BFD10 Series: With 2-ch Ethernet,...
FM3 Family of Ethernet-Enabled and Compact Low-Leak MicrocontrollersHigh-Performance MB9B610/410/310/110 and Ultra-Low-Leak MB9A130 Series
DescriptionThe Fujitsu FM3 family of 32-bit general purpose microcontrollers (MCUs) features the industry’s leading-edge ARM® Cortex-M3™ CPU. The MCUs integrate Fujitsu’s reliable, high-speed embedded flash technology and a host of robust peripheral features, multiple motor control timers, high-speed ADCs and a wide range of communication interfaces. The FM3 family is optimized to address the 16-bit and 32-bit microcontroller market for a variety of industrial and consumer applications.
The newest member of the FM3 family, the MB9Bx10 High-Performance series MCUs feature the industry’s first two-channel Ethernet MAC support, and are designed for processor-intensive system controllers and communications-oriented systems. The MB9A130 Ultra-Low-Leak series MCUs are optimized for battery-powered applications and low-cost products.
The FM3 family is an ideal choice for system designer looking to streamline development and time to market. Fujitsu offers a common set of programming libraries and tools, a full line of starter and development kits, and application support to aid system design. For more information about the entire FM3 Family, visit http://us.fujitsu.com/semi/mcu/FM3.
High-Performance MB9B610/410/310/110 SeriesThe MB9Bx10 High-Performance series is designed for processor-intensive controllers and communication-oriented systems. The devices feature the industry’s first two-channel Ethernet MAC support along with multiple CAN and USB interfaces. The series also integrates multiple inverter control for high precision and high-speed motor control, along with support for other safety features, including those that meet
FS fact sheet
the IEEE1588 requirements for time-synced communication between machinery in an automated factory setting. Other features include core clock speeds up to 144MHz, support up to 1MB high-speed flash memory, and up to 128KB RAM. Available device configurations support 1-ch or 2-ch Ethernet MAC, USB2.0 host/slave functions, CAN, and up to 3-ch inverter control timers. The MB9Bx10 High-Performance series MCUs are available in LQFP176, LQFP144, and BGA192 packages.
With multiple communication interfaces, large memory and high performance, the High-Performance series MCUs are ideal for networked applications including industrial equipment, inverters, servo motors, and programmable controllers for home appliances, office equipment, and automated factory equipment.
Ultra-Low-Leak MB9A130 SeriesThe new MB9A130 Ultra-Low-Leak series MCUs are optimized for battery-powered applications and low-cost products. Incorporating the low-power ARM Cortex-M3 CPU core with power-gating technologies developed by Fujitsu, the devices offer low leakage and support for voltage ranges from 1.8V to 5.5V.
Six other intelligent power-saving features — sleep mode, timer mode, RTC mode, stop mode, deep-standby RTC mode, and deep-standby stop mode — offer extended battery life and low power performance. When using RTC mode under date and time management, the controller draws an extremely low 1.6 microAmps of power. In deep-standby RTC mode, where power to the flash memory is shut off, the MCU draws just 1.2 microAmps, among the lowest power requirements in the industry.
Controllers in the MB9A130 Ultra-Low-Leak series can operate up to 20MHz core clock and are available with 128KB to 64KB of flash memory, up to 8KB RAM, and in 64-pin to 48-pin packages. The devices offer an excellent design option for medical equipment, small appliances, home electronics products, utility meters, and digital entertainment systems. The series roadmap plans for support of LCDC integrated devices with large direct-drive-segmented LCD displays.
intelligent Processors by ARM
Ethernet 2-ch
RC oscillator ± 2%
Clock Supervisor
Subclock (option)
Low Voltage Detector 2-chMain CLK: SUB CLK:MAIN RC CLK:SUB RC CLK:
SWJ/TPIU/ETM Debug Ports
CAN (32 MSB) 2-ch MB9BFx18
PPG x 3-ch
ADT x 3-ch
OCU x 6-ch
Triple Three-Phase Inverter Control features: Multi Function Timer with 3 units
ICU x 4-ch
FRTim x 3-ch
Waveform
External IRQs
DMA 8-ch
Dual Timer
Watch Counter
External bus Interface1Note MB9BF110Series: standard MB9BF210: 1-ch Ethernet, 2-ch USBMB9BF310 Series: With 2-ch USBMB9BF410 Series: With 2-ch CANMB9BF510 Series: With 2-ch USB , 2-ch CANMB9BF610 Series: With 2-ch Ethernet, 2-ch USBMB9BFD10 Series: With 2-ch Ethernet, 2-ch USB, 2-ch CAN
Hardware Watchdog
CRC
Base Timer16-ch
Quadrature Decoder Unit (QDU) 3-ch
12-bit ADC24-ch or 32-ch
Cortex M3 – CPU144MHz (max)
2.7-5.5V
Package: LQFP – 176 and 144 andBGA-192 pin packages
Flash1MB
SRAM128KB
SRAM96KB
SRAM64KB
Flash768KBFlash
512KB
MB9BFx17
MB9BFx16MFS (UART/SPI/I2C) x 8-ch
USB FS Host + Function x 2-ch
4MHz32kHz4MHz100kHz
Block Diagram of MB9B610/410/310/110 Series
Key Features• Industry’s first 2-ch Ethernet MAC and option for 1-ch device
• High-performance and low-power CPU (up to 144MHz core clock speed)
• Support for operating voltages from 2.7V to 5.5V
• Up to 3-ch inverter motor control timer
• Up to 32-ch high-speed 12-bit ADC
• Options for up to 2-ch CAN and USB
• Large high-speed Flash memory up to 1MB
• Large RAM up to 128KB
• Flexible power-saving modes, including a deep standby RTC mode
• Integrated support for IEEE1588 and functional safety functions
Applications• Industrial networked equipment and automation
• High precision, high-speed sensing and sensor-network equipment
• Servomotor control and inverter control for appliances
• Control and gateway for several applications in home and industrial automation
Block Diagram of MB9A130 Series
intelligent Processors by ARM
MB9AF132
PPG x 3-ch
ADT x 3-ch
OCU x 6-ch
Three-Phase Inverter Control features:Multi Function Timer 1 unit
ICU x 4-ch
FRTim x 3-ch
Waveform
External IRQs
1Note L Suffix: 64 pinK Suffix: 48 pin
Hardware Watchdog
Base Timer8-ch RTC
12-bit ADC6-ch or 8-ch
Cortex M3 – CPU20MHz (max)
1.8-5.5V
Package: QFP/LQFP–48 and 64 pin
Flash128KB
SRAM8KB
SRAM8KB
Flash64KBMB9AF131
MFS(UART/SPI/I2C) x Max 8-ch
Main CLK: SUB CLK:MAIN RC CLK:SUB RC CLK:
RC oscillator ± 2%
Clock Supervisor
Subclock (option)
Low Voltage Detector 2-ch
SWJ Debug Ports4MHz32kHz4MHz100kHz
Key Features• Optimized performance CPU (up to 20MHz core
clock speed)
• Low power standby mode
• Wide operating voltage from 1.8V to 5.5V
• Flash memory up to 128KB, RAM up to 8KB
• Support for single inverter motor, multiple serial interfaces and multiple timers
Applications• Low-power, low-cost control applications
• Home electronics and digital equipment
• Small home appliances
• Utility meters
Starter Kits and Tools• Starter kits from Fujitsu and third parties (IAR)
• Compiler IDE form IAR, Keil, Attolic, Mentor/CodeSourcery
• RTOS/middleware with TCP/IP and advanced networking protocol support
— Micrium, FreeRTOS, RoweBots, Segger and many other options
• Demo solutions from Fujitsu with complete bard support package
FUJITSU SEMICONDUCTOR AMERICA, INC.Corporate Headquarters1250 E. Arques Avenue, M/S 333, Sunnyvale, CA 94085-5401Tel: (800) 866-8608 Fax: (408) 737-5999E-mail: [email protected] | Website: http://us.fujitsu.com/semi
©2011 Fujitsu Semiconductor America, Inc.All company and product names are trademarks or registered trademarks of their respective owners.
Printed in the U.S.A. MCU-FS-21411-10/2011
8
Product Line-upHigh-Performance MB9B610/410/310/110 Series
Operating Frequency
(Max.) Package
FLASH/RAM
64KB/8KB 128KB/8KB
20MHz
LQFP-64pin0.5mm pitch
MB9AF131LPMC1 MB9AF132LPMC1
LQFP-64pin0.65mm pitch
MB9AF131LPMC MB9AF132LPMC
LQFP-48pin0.5mm pitch
MB9AF131KPMC MB9AF132KPMC
Ultra-Low-Leak Group MBA130 Series
For more information about the entire FM3 Family, visit http://us.fujitsu.com/semi/mcu/FM3.
Operating Frequency
(Max.) Package
Peripheral FLASH/RAM
Ethernet-MAC
USB 2.0 Host/
Function CAN 512KB/64KB 768KB/96KB 1MB/128KB
144MHz
BGA-192pin0.8mm pitch
2 2 – MB9BF616TBGL MB9BF617TBGL MB9BF618TBGL
– 2 2 MB9BF516TBGL MB9BF517TBGL MB9BF518TBGL
– – 2 MB9BF416TBGL MB9BF417TBGL MB9BF418TBGL
– 2 – MB9BF316TBGL MB9BF317TBGL MB9BF318TBGL
1 2 – MB9BF216TBGL MB9BF217TBGL MB9BF218TBGL
– – – MB9BF116TBGL MB9BF117TBGL MB9BF118TBGL
LQFP-176pin0.5mm pitch
2 2 2 MB9BFD16TPMC MB9BFD17TPMC MB9BFD18TPMC
2 2 – MB9BF616TPMC MB9BF617TPMC MB9BF618TPMC
– 2 2 MB9BF516TPMC MB9BF517TPMC MB9BF518TPMC
– – 2 MB9BF416TPMC MB9BF417TPMC MB9BF418TPMC
– 2 – MB9BF316TPMC MB9BF317TPMC MB9BF318TPMC
1 2 – MB9BF216TPMC MB9BF217TPMC MB9BF218TPMC
– – – MB9BF116TPMC MB9BF17TPMC MB9BF118TPMC
LQFP-144pin0.5mm pitch
2 2 2 MB9BFD16SPMC MB9BFD17SPMC MB9BFD18SPMC
2 2 – MB9BF616SPMC MB9BF617SPMC MB9BF6168PMC
– 2 2 MB9BF516SPMC MB9BF517SPMC MB9BF5168PMC
– – 2 MB9BF416SPMC MB9BF417SPMC MB9BF4168PMC
– 2 – MB9BF316SPMC MB9BF317SPMC MB9BF3168PMC
1 2 – MB9BF216SPMC MB9BF217SPMC MB9BF2168PMC
– – – MB9BF116SPMC MB9BF117SPMC MB9BF1168PMC