FLUSHING SERVICESSafeProfessionalOn TimeOn Budget

WHEN RESULTS MATTEREPT is the only integrated lubricant maintenance solutions company in the world.

At EPT we combine next generation filtration technology development with laboratory and flushing services. Advancements in each area of expertise propels us forward in the other areas.

• We develop new filtration technologies based on results from our research grade lab.

• We offer customized flushing programs with our proprietary filtration technologies.

• By sending chemists into the field for flushes, we see ways to improve our filtration technologies.

EXPECT MORE FROM YOUR HIGH VELOCITY FLUSHING PROVIDER

Experience and professionalismCleanOil has carefully established our reputation in this important service. We will exceed your requirements with a professional, knowledgeable staff that embraces safety. EPT is a member of ASTM’s turbine oil committee and we are corporate members of STLE.

Best-in-class equipment and filtration technologyOur flushing equipment has been engineered based on 20 years of flushing experience enabling us to provide our customers with performance and completion times that are unmatched in the industry.

Real time oil analysisCleanOil’s flushing program provides real-time reporting through on-site lab analysis performed by professional chemists. This enables us to verify oil quality and demonstrate performance throughout the flushing process. CleanOil’s testing equipment comes with certificates of calibration, and we follow ISO and ASTM test methods.

CleanOil, a division of EPT, is a leader in high velocity oil flushing with the specialized expertise to deliver safe, professional, and on-time/on-budget results.

EXPERIENCE20 years, over 200 flushes.

PROFESSIONALDaily reporting on project status and on-site chemist for real-time lab analysis.

RESULTS100% on-time completion and on budget.

EMBRACING SAFETYISNetworld® compliant, safety reports and safety manuals.

Communication and reportingA professional daily report communicated to all stakeholders is essential to determine the appropriate path forward. CleanOil’s comprehensive reporting will outline progress, results and document compliance with operational and safety protocols.

WHAT TO EXPECT FROM A CLEANOIL FLUSHING SERVICE

EPT Flushing System

Loop 1

Oil Reservoir

High Velocity Pump (HVP)

Lube Oil Line Component

Filtration Vessels

1

2

Suction from flushingsystem draws oil from reservoir to heat and filter

5

Dirty oil from lube oil line component passes through filtration vessels

6

Filtered oil returnedto reservoir

Heated and filtered oil pumped to reservoir

3

Clean oil is drawn by HVP

4

HVP pushes clean oil to lube oil line component to be flushed

Loop 2

CleanOil Flushing Procedure

CleanOil’s flushing procedure puts safety and hazard assessment first. Our project management ensures that construction and commissioning supervisors receive daily communication and documentation to track project status and progress.

1. Safety indoctrination by customer

2. Formal hazard assessment

3. Field level hazard assessment

4. Pre-job meeting

5. Daily safety meetings, project status and reporting

6. On-site testing results from professional chemist

7. Compliance reports

8. Final report

CleanOil Flushing Process

CleanOil’s approach is customized according to customer needs with flow rates of up to 800 gal/min.

Our flushing process adheres to the ASTM D6439 standards as outlined below. We incorporate additional steps based on our extensive experience in flushing to ensure successful results.

1. Selection of flushing fluidFor new turbine lubricant systems, the need for a separate flushing fluid is not always necessary. Depending on the flushing specifications, the operating fluid rather than a flushing or chemical agent can be used as the flushing fluid.

2. Preparation of system for flushingOur pre-cleaning filtration process ensures that flushing fluids exceed new fluid specifications before the process begins.

3. Charging flushing fluid to reservoirFluid is filtered extensively throughout this process.

4. Flushing operation With real-time monitoring of contaminants during flushing.

5. Draining of oil used for flushing

When operating fluid is used for flushing, it can be tested, drummed and used as make-up fluid.

6. Displacement fluidDisposal of all waste products is done in accordance with environmental regulations.

A SUCCESSFUL FLUSH IS THE FIRST STEP IN LONG-TERM OIL MAINTENANCETo ensure systems stay clean over their lifetime, EPT can provide a comprehensive review of existing filtration practices with suggestions for improvements and cost savings.

Please visit our website at cleanoil.com for details on our application-specific filtering systems and products.

CONTACTSean Dufresne

Direct: +1-403-637-2400

Cell: +1-403-519-1310

Email: sdufresne@cleanoil.com

© 2016 EPT. All rights reserved.