Fluke 1750€¢ Quick and reliable configuration: PDA wire-less “front panel interface” provides...

8
Technical Data Technical Data Power quality that meets the standard: All measurements comply with IEC61000-4-30 standards for correct evaluation of all measured values including voltage, current, power, har- monics, flicker etc. Quick and reliable configuration: PDA wire- less “front panel interface” provides the ability to verify setup without a laptop along with a window into what the instrument is recording, even in awkward test locations. Threshold-free setup: Apply thresholds after data is collected with Fluke Power Analyze Software so there is no need to worry about missed information due to incorrect set-up. Captures everything: Cross-channel and current triggering capture every measurement, on every channel, every time. Capture every measurement, every event, on every cycle, all the time with the Fluke 1750 Power Recorder. Outstanding accuracy and resolution provide complete visibility into your installation or distribution system. Fluke 1750 Three-Phase Power Recorder Never miss capturing a disturbancewith the exclusive threshold-free measurement system, it’s automatic. Intuitive PC software: Easily analyze data and generate reports. Automated EN50160 reporting and compliance. Plug and play: Set up in minutes with self- identifying current probes and single-lead voltage connections. No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct. Measure every parameter: voltage and current on three phases, neutral, and ground. 5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events. Quickly retrieve data: With included SD memory card or via the 100BaseT high-speed Ethernet connection.

Transcript of Fluke 1750€¢ Quick and reliable configuration: PDA wire-less “front panel interface” provides...

Technical DataTechnical Data

•Power quality that meets the standard:AllmeasurementscomplywithIEC61000-4-30standardsforcorrectevaluationofallmeasuredvaluesincludingvoltage,current,power,har-monics,flickeretc.

•Quick and reliable configuration:PDAwire-less“frontpanelinterface”providestheabilitytoverifysetupwithoutalaptopalongwithawindowintowhattheinstrumentisrecording,eveninawkwardtestlocations.

•Threshold-free setup: ApplythresholdsafterdataiscollectedwithFlukePowerAnalyzeSoftwaresothereisnoneedtoworryaboutmissedinformationduetoincorrectset-up.

•Captures everything: Cross-channelandcurrenttriggeringcaptureeverymeasurement,oneverychannel,everytime.

Capture every measurement, every event, on every cycle, all the time with the Fluke 1750 Power Recorder. Outstanding accuracy and resolution provide complete visibility into your installation or distribution system.

Fluke 1750Three-Phase Power Recorder

Never miss capturing a disturbance—with the exclusive threshold-free measurement system, it’s automatic.

•Intuitive PC software: Easilyanalyzedataandgeneratereports.AutomatedEN50160reportingandcompliance.

•Plug and play: Setupinminuteswithself-identifyingcurrentprobesandsingle-leadvoltageconnections.

•No need to reconnect wires: SwapchannelsinternallywiththewirelessPDAorPCwhenconnectionsarenotcorrect.

•Measure every parameter:voltageandcurrentonthreephases,neutral,andground.

•5 MHz, 8000 Vpk waveform capture:Getadetailedpictureofeventheshortestevents.

•Quickly retrieve data:WithincludedSDmemorycardorviathe100BaseThigh-speedEthernetconnection.

dada
Long TEQUIPMENT

2FlukeCorporationFluke1750Three-PhasePowerRecorder

Applications Long-term analysis:Uncoverhard-to-findorintermittentissues;monitorcriticalequipment,capturingpowerqualityeventstocorrelatewithequipmentmalfunctionPower quality surveys:Quantifypowerqualitythroughoutafacility,documentingresultswithprofessionalreportsQuality of service compliance:ValidateincomingpowerqualityattheserviceentranceEquipment Installation/Commissioning:Bench-markpowersystempriortoinstalltoinsurequalityofservice

Easy to use Therecorderautomaticallydetects,scales,andpowerscurrentprobeswithoutneedingbatteries.Requiringonlysingle-leadvoltageconnectionsenablessafeandquicksetups.Oncepowerisappliedtheinstrumentautomaticallybeginsrecord-ingandLEDsgiveyouassurancethattherecorderispoweredupandsignalsarewithinrange–nomoreuncertaintythatdataisbeingrecorded.TheFluke1750hasanexclusivecapturealgorithmwhichmakescertainalleventsarecapturedwith-outthetedioussetupsandblindspotsassociatedwiththresholddrivenequipment.

ThePDAwirelesslyinterfaceswiththerecorder,allowingquicksetupandverificationwithwave-formdisplays,meterscreens,andphasordiagrams.Thebuilt-inwirelesstechnologyallowsyoutocontrolmultipleinstrumentsfromadistanceeasily,withouttheneedforalaptopcomputer(laptopscanalsobeusedwhendesired).

Viewmeasurementsreal-timewithwirelessPDAinterface.

Configurationsaresimplewithwiringdiagramstoguideyou.

Noneedtoreconnectwires—swapchannelsinternallyusingthePDAinterface.

3FlukeCorporationFluke1750Three-PhasePowerRecorder

Comprehensive power system data Everycycleoneverychannelissimultaneouslysampledprovidingcompleteanalysisofpowerquality,harmonics,powerandenergy.Cross-channelcurrentandvoltagetriggeringcaptures

Powerful data managementDataisautomaticallystoredontheinternalflashmemorythatcanstorerecordsforoveramonthwithoutcompressionoroverwriting.Dataisretrievedviaoneoftwoquickandeasyoptions:downloadthedataontotheincludedSDmemory

Eventscanbedisplayedagainstavarietyoftolerancecurves.

cardwithoutusingyourlaptop,ortransferdirectlytoyourcomputerviaEthernet,usingTCP/IPprotocol.

Voice,data,andpictureannotationscanbemadeviathePDAtoflagimportantpointsinthedatastream.Imaginebeingabletoflaginyourrecordeddatawhenatransferswitchwasoperated,orloadchangesweremade.

FullFFToneachchanneltothe50thharmonic.

Displaymultipleparameterssimultaneouslyononegraph.

EN50160reportdeliversaneasytoreadpassorfailchartalongwithdrilldowndata.

Full-featuredpowermeterdisplayforeachchannelandtotals.

ThresholdsfortheEN50160reportareeasilycustomized.

eventdataonallinputchannelssimultaneously,nomatterwhichchanneltriggeredtheevent.Whenperiodicanalysisofthewaveformmaybeneeded,theSnapshotmodecaptureswaveformsatuser-definedintervals.Evendcsignalscanberecorded!

4FlukeCorporationFluke1750Three-PhasePowerRecorder

IEC61000-4-30compliantmeasurementsystemspro-videtheconfidencethatallparametersaremeasuredandcalculatedconsistentlywithinternationalstandards.AutomatedEN50160compliancereportingforrapidPass/Failtesting.

Designedtohelpprotectyouandyourequipment,theFluke1750Three-PhasePowerRecorderandaccesso-riesareallcertifiedtomeetthestringentsafetystandardsforusein600VCATIVand1000VCATIIIenviron-ments.TheyarethefirsttoolsoftheirkindtocarrytheCATIVratingand,therefore,canbeusedformostpowerconnectionsandforalloutletsinalow-voltagepowerdistributionsystem.

View data the way you want ThenewFlukePowerAnalyzesoftwarerevolu-tionizesyourabilitytoanalyzedata.Noneedtoworryaboutthresholds—withFlukePowerAna-lyze,thresholdscanbemodifiedafterthedataisrecorded!Andtheeasy-to-useuserinterfacewilldisplayvoltageasaphase-to-phaseorphase-to-neutralreading.

Applythresholdstodataaftercollectionusingavarietyofstandardorcustomizedtemplates.

SimplifiedreportwriterfeatureincludedinFlukePowerAnalyze.

All the latest power quality standards are built-in

600 V CAT IV and 1000 V CAT III safety rating

5FlukeCorporationFluke1750Three-PhasePowerRecorder

Optional Accessories

FlukepowerqualitycurrenttransformersandflexiblecurrentprobesarespeciallydesignedtoworkseamlesslywithFlukepowermonitors(1750and1650).Allclamp-onandflexi-CT’sarematchedtotakefulladvantageofyourinstrument’sabilitytosetscalefactorsforaccuratereadings.

Cases1750/CASE Transit Case •Ruggedwatertighttransitcase

withrollers

Miscellaneous1750/MC •AdditionalSDMemoryCard

forFluke1750

1750/SEAT-L •FlukePowerAnalyze–

AdditionalSEATLICENSE•Oneadditionallicensefor

installationononeadditionalPC

1750/SITE-L •FlukePowerAnalyze-

AdditionalSITELICENSE•Sitelicenseforinstallationon

unlimitedPCs

4006 Security Cable•1.8m(6ft)loopedlockable

steelcableforsecuringmonitor

Model No. CT Type Current Range AccuracyFrequency Response Jaw Opening

3005-PR Clamp-On 0.01Ato5A 1%RDG±0.5%FS 5kHz 2cm(.78in)dia.3014-PR Clamp-On 0.1Ato40A 1%RDG±0.1%FS 5kHz 2cm(.78in)dia.3140R Clamp-On 2Ato400A 2%RDG±0.04A 20kHz 3.2cm(1.25in)dia.

Model No. CT Type Current Range AccuracyFrequencyResponse Probe Length

3110-PR Flexi-CT 2Ato100A 1%rdg±0.5%FS 7kHz 60cm(24in)3210-PR Flexi-CT 20Ato1000A 1%rdg±0.15%FS 7kHz 60cm(24in)3310-PR Flexi-CT 100Ato5000A 1%rdg±0.15%FS 7kHz 60cm(24in)3312-PR Flexi-CT 100Ato5000A 1%rdg±0.15%FS 7kHz 120cm(48in)

dada
Long TEQUIPMENT

6FlukeCorporationFluke1750Three-PhasePowerRecorder

Specifications for the System: Recorder and Power Analyze Software

General

Power quality measurement standards Conformance IEC61999-1-4Class1,IEC61000-4-30,IEEE519,IEEE1159,IEEE1459andEN50160Clock/calendar Leapyears,24-hourclockReal-time clock accuracy Notmorethan±1s/dayInternal memory capacity for data Atleast2GBMaximum recording period Atleast31daysMeasurement time control AutomaticMaximum number of events LimitedonlybythesizeoftheinternalmemoryPower requirements 100to240Vrms±10%,47-63Hz,40WOperating time during interruptions(internalUPSoperation)

5minutesperinterruption,60minutestotaloperatingtimewithoutrecharging

Dimensions 215mmx310mmx35mm(8.5inx12.2inx3.5in)Mass (weight) 6.3kg(14lb)

InputMeasurement types OnePhasePlusNeutral,OnePhaseITNoNeutral,OnePhaseSplitPhase,ThreePhaseWye,

ThreePhaseDelta,ThreePhaseIT,ThreePhaseHighLeg,ThreePhaseOpenLeg,2ElementDelta,21/2ElementWye

Input channels Voltage:4channels,ac/dcCurrent:5channels

Voltage channels Inputresistance:2MΩInputcapacitance:<20pF

Current input characteristics 2Vrms=fullscale,1MΩInputImpedanceforferroCTs,lowimpedanceforFlexi-CTsMeasuring method Simultaneousdigitalsamplingofvoltageandcurrent.DigitalPLLsynchronizedsampling,internal

frequencyreferenceusedduringvoltagedrops.

Synchronization and samplingPLL-synchronization source ThePLLsynchronizestotheA-Nvoltageforwyepowertypes,andtotheA-Bvoltagefordelta

powertypes.Alllistedpowertypescanbecharacterizedaseitherwyeordelta.PLL lock range 42.5to69HzSampling frequency Voltageandcurrent:256samples/cycle

Inter-harmonicsperIEC61000-4-7:2560points/10cycles(50Hz),3072points/12cycles(60Hz)TransientVoltage:5MHz

A/D resolution Voltageandcurrent:24bitsTransientvoltage:14bits

Voltage and current measurementsVoltage measurement range ACvoltage:1000Vrms±10%overrange

DCvoltage:±1000V+10%overrangeVoltage crest factor 3orlessCurrent measurement range DependsoncurrentprobeusedCurrent crest factor 4orless

Voltage and current measurement accuracyRMS voltageMeasurement type Truermscalculatedcontinuously:everycycle,every1/2cycle,and

every10or12cyclesat50or60Hzrespectively,asrequiredbyIEC61000-4-30.Measurement uncertainty AC:±0.2%reading±0.1%fullscale,above50Vrms

DC:±0.5%reading±0.2%fullscale,above50VdcRMS currentMeasurement type Truermscalculatedcontinuously:everycycle,every1/2cycle,and

every10or12cyclesat50or60Hzrespectively,asrequiredbystandardsMeasurement uncertainty Ferromagnetic Clamps:±(0.1%fullscale+0.2%reading+currentsensoraccuracy),

validfor5%to100%ofcurrentsensorrangeFlexible Current Probes:±(0.1%fullscale+0.5%reading+currentsensoraccuracy),validfor5%to100%ofcurrentsensorrange

7FlukeCorporationFluke1750Three-PhasePowerRecorder

Transient voltage (impulse)Measurement type WaveshapesamplingFull scale 8000VpkSample resolution 200nSMeasurement uncertainty ±5%reading±20V(testparameters:1000Vdc,1000Vrms,100kHz)

Dip (Sag) and Swell MeasurementsVoltage swell (rms swell)Measurement type Truerms(onecyclecalculationbyoverlappingeachhalfcycle-voltagebetweenlinesismeasured

for3P3Wlinesandphasevoltageismeasuredfor3P4Wlines)Displayed data AmplitudeanddurationofswellMeasurement uncertainty Sameasrmsvoltage

Voltage dip (rms sag)Measurement type Truerms(onecyclecalculationbyoverlappingeachhalfcycle-voltagebetweenlinesismeasured

for3P3Wlinesandphasevoltageismeasuredfor3P4Wlines)Displayed data AmplitudeanddurationofdiporinterruptionMeasurement uncertainty Sameasrmsvoltage

Voltage dropout (interruption)Measurement type Sameasvoltagedip

Power MeasurementsCalculated per IEEE1459 for best performance when distortion is presentMeasurement type Truermscalculatedcontinuously:everycycle,andevery10or12cyclesat50or60Hzrespec-

tively,asrequiredbystandardsMeasurement accuracy +/-(voltageuncertainty+currentuncertainty+currentprobeuncertainty)FrequencyMeasurement range 42.5to69HzMeasurement source SameasPLLsynchronizationsourceMeasurement accuracy ±10mHz(10to110%ofrange,withsinewave)

Power factorMeasurement range 0.000to1.000Measurement accuracy ±1digitfromthecalculationofeachmeasuredvalue(±3digitsfortotal)

Displacement power factorMeasurement method CalculatedfromthephasedifferencebetweenvoltagefundamentalandcurrentfundamentalMeasurement range -1.000(leading)to+1.000(lagging)Measurement accuracy ±0.5%reading±2%fullscale±1digit

Voltage unbalance and phase sequenceMeasurement method Positivesequencevoltagedividedbynegativesequencevoltage,perIEC61000-4-30

Harmonic voltage and currentAnalysis window rectangularAnalysis order 1stto50thorderMeasurement accuracy Voltage/Current:1stto20thorders:±0.5%reading±0.2%fullscale,21stto50thorders:±1%

reading±0.3%fullscale(currentsensoraccuracymustbeincludedforcurrentandpower)Measurement method IEC61000-4-7

Inter-harmonic voltage and current (intermediate harmonics)Analysis window rectangularAnalysis orders 1.5to49.5thorderMeasurement method IEC61000-4-7

Voltage flickerMeasurement method asperEN61000-4-15:2003:10min(Pst),2h(Plt)

8FlukeCorporationFluke1750Three-PhasePowerRecorder

External Interface SpecificationsLAN interfaceConnector RJ-45Speed and type 10/100Base-T,autoMDIXCommunications protocol TCP/IPoverEthernet

Wireless controller interfaceConnection wireless(2.4GHzradio)Speed upto700kbit/secondCommunications protocol BluetoothSPP

Environmental and safety specificationsOperating environment Indoorsorincoveredareaoutdoors,upto2000maltitude(forcompliancetoIEC61010standard)Storage temperature and humidity -20°Cto50°C,80%RHmax,non-condensingOperating temperature and humidity 0°Cto40°C,80%RHmax,non-condensing

Maximum rated working voltageVoltage terminals 1100VrmsVoltage durability 5550Vrmsacfor1minute,betweenvoltageinputterminals,voltageinputterminalsandcurrent

probes,andvoltageinputterminalsandcase(50/60Hz,1mAsensecurrent)Enclosure protection IP30(perEN60529)

Standards conformanceEMC EN61326-1:1997+A1:1998ClassA

EN61000-3-2:1995+A1:1998+A2:1998EN61000-3-3:1995

Safety EN61010-12ndEdition;2000Voltageinputunit: ContaminationLevel2,OvervoltageCategory1000VCATIII,600VCATIV(anticipatedovervoltage:8000V)

Ordering informationFluke-1750 Three-PhasePowerRecorder

Includes: •1750acquisitionunit•PDAwireless“frontpanelinterface”

andchargerpowerplugadapters•4-400Acurrentprobes(3140R)•5testleadsandclips

•SDmemorycard•FlukePowerViewandFlukePower

Analyzesoftware•Powercordwithinternationalplugset•Ethernetcable•Colorlocalizationset•PrintedGettingStartedmanual•ProductCDwithsoftwareandusers

manualPDF•Softcarryingcase

Flukeoffersafullsuiteofpowerqual-itytesttoolstolocate,predict,preventandtroubleshootpowerproblems.•Handheldtroubleshootersforin-

stantanalysis•Ready-to-usepowerloggers•Comprehensivepowerqualityre-

corders•Powercalibratorsandstandards

backedbyFlukemetrologyexpertise

TheFlukepowerqualitysetofproductsoffersthehighestlevelofperformanceandmaintainstheFlukepromiseofruggedandreliabletesttools.

Tolearnmore,contactPowerQualitycustomersupport,inSeattle,WA,[email protected].

Fluke-1750 Three-PhaseBasicPowerRecorder

Includes items above with the exception of the 4 - 400 A current probes (3140R)

dada
Short TEQUIPMENT