J K IndustriesFluid Bed Dryer

Introduction• It is most suitable for drying granular, crystalline, coarse

or similar material• It is designed to dry pharmaceutical, fine chemicals,

dyes, food and allied products• It is not suitable for liquid or pasty material• Electrically / Steam heated and Thermic Fluid heated

structure• Standard Model: Made out of mild steel and colored• GMP Model: Made out of S.S.304 quality material and

polished to matt finished• Contact Parts: Product Container and Retarding

Chamber made out of S.S.304/S.S.316 quality material• The non flameproof blower motor is available

How it Works?• The base of the container filled with material, is

heated with hot air stream• The fresh air is sucked using a blower and it is

heated by electrical heaters or thermic fluid heaters• The hot air expands into bed of material and

create a dry atmosphere• This phenomenon is known as fluidization

Tray Dryer v/s Fluid Bed DryerTray Dryer

• It requires large floor space• Drying time is very

high• It is difficult to operate• There is some loss of

heat

Fluid Bed Dryer• It requires less floor

space compare to tray dryer• It takes less time to

dry the material• It is very easy to

operate• There is no loss of

heat

Other Important Points

Temperature can be distributed and heat transfer rate is high

High production can be achievedProduct’s physical and chemical properties remainsIt is effective for heat sensitive productsContinues movement of product minimizes lump

formation, case hardening etc.

Silent Features

• Uniformity in drying and reduction in drying time• In electrically heated model, digital temperature controller for

inlet air and digital temperature indicator for outlet air• In steam / thermic fluid heated model, only a digital

temperature indicator provided for inlet and outlet air• You can control the flow of inlet and outlet air manually• Full safety provided with the machine

Optional Features• PRE / MICRO V & HEPA filters are provided on demad• Pneumatic system for lifting of product container• Flameproof motor with flameproof enclosure• Safe earthing arrangement• Extra product container with trolley• Pneumatically operated inlet and outlet dampers

Contact Us

J K IndustriesAddress:Plot No I, 15/5, G.I.D.C.Near Chirag Cinema, National HighwayKalol – 382721Phone: +91-2764-222424Mobile: +91-9978920441E-mail: info@jkindus.comWebsite: http://www.jksparklerfilterpress.com