Flow Control Equipment and Accessories

Description Page

1. OF Landing Nipple (Top No-Go) 1

2. OR Landing Nipple (Bottom No-Go) 3

3. OOR Landing Nipple Selective (Non-Ported) 5

4. OORN Landing Nipple Non-Selective (Bottom No-Go) 7

5. OX Landing Nipples Selective 9

6. OXN Landing Nipples (No-Go) Non-Selective 10

7. OL Sliding Sleeve (Selective) For standard well environment 11

8. OXA - Sliding Sleeve Selective 12

9. OXA - Sliding Sleeve Non-Elastomeric 14

10. OXO - Sliding Sleeve (Jar Down to Open) 17

11. OFB-2 Top No-Go Standing ValveORB-2 Bottom No-Go Standing Valve 20

12. OX & OXN Lock Mandrels 21

TABLE OF CONTENT

OF Top No-Go, Non-Ported Landing Nipple is a tubing nipple for use with Top no-go lockingdevices only. It has a Polished Seal bore, Top No-Go shoulder, and a locking groove.

OF nipple locates, seals, and retains flow control accessories that have a top no-go lockingdevice. The accessories are run and retrieved on slickline.

OF Landing Nipples are located throughout the tubing string with larger diameter seal boresat the top of the tubing string, tapering down to smaller diameter seal bores at the lowerend of the tubing string, creating a tapered tubing ID.

The numerous different sizes of OF Seal Bores, allows multiple differentsized OF Landing Nipples to be used in the same tubingstring.

Selective locking devices allow more than 1 OF Landing Nipple of the sameseal bore diameter to be used in the same tubing string.

OF Landing Nipple(Top No-Go)

Benefits

Applications

• Used to Land Instrument (Bomb) Hangers.• Used to Land Blanking Plugs.• Used to Land Check (Standing) Valves.• Used to Land Injection Valves.• Used to Land Chokes.

ORDERING EXAMPLE: Product No. OIL-OFLN-3500-2750 OF" LANDING NIPPLE EUE 8 Rd Box x Pin for 4.7 Iblft tubing.

1

OF Landing Nipple(Top No-Go)

Tubing O.D. Seal BoreMin O.D.

Box by Pin Threads

in. mm. in. mm. in. mm.

1.660 42.151.170 30.15

1.875 47.63

1.250 31.75

1.900 48.261.437 36.50

2.109 53.571.500 38.10

2-1/16 53.371.562 39.67

2.250 57.151.625 41.28

2-3/8 60.33

1.781 45.24

2.560 65.021.812 46.02

1.875 47.63

2-7/8 73.02

2.062 52.37

3.109 78.97

2.125 53.98

2.188 55.58

2.250 57.15

2.312 58.72

3-1/2 88.90

2.562 65.07

3.687 93.652.750 69.85

2.812 71.42

4-1/2 114.30

3.688 93.68

5.200 132.083.750 95.25

3.812 96.82

2

3

OR Bottom No-Go Non-Ported Landing Nipple is a tubing nipple for usewith bottom no-go locking devices only. It has a Polished Seal bore,bottom no-go shoulder, and a locking groove.

OR nipple locates, seals, and retains flow control accessories that havea bottom no-go locking device. The accessories are run and retrievedon slickline.

OR Landing Nipples are typically located at the bottom of the tubing string

as the last profile, with only a slickline re-entry guide lower in thetubing string.

OR Landing Nipple(Bottom No-Go)

The Bottom No-Go ensures simple and positive landing of wirelinetools.

The Bottom No-Go prevents the loss of wireline tools when

they are inadvertently dropped or released during running or

retrieving.

Benefits

Applications

• Used to Land Instrument (Bomb) Hangers.• Used to Land Blanking Plugs.• Used to Land Check (Standing) Valves. • Used to Land Injection Valves.• Used to Land Chokes.

ORDERING EXAMPLE: Product No. OIL-ORLN-3500-2750 OR" LANDING NIPPLE EUE 8 Rd Box x Pin for 4.7 Iblft tubing.

OR Landing Nipple(Bottom No-Go)

Tubing O.D. Seal BoreMin O.D.

Box by Pin Threads

in. mm. in. mm. in. mm.

1.660 42.151.170 30.15

1.875 47.63

1.250 31.75

1.900 48.261.437 36.50

2.109 53.571.500 38.10

2-1/16 53.371.562 39.67

2.250 57.151.625 41.28

2-3/8 60.33

1.781 45.24

2.560 65.021.812 46.02

1.875 47.63

2-7/8 73.02

2.062 52.37

3.109 78.97

2.125 53.98

2.188 55.58

2.250 57.15

2.312 58.72

3-1/2 88.90

2.562 65.07

3.687 93.652.750 69.85

2.812 71.42

4-1/2 114.30

3.688 93.68

5.200 132.083.750 95.25

3.812 96.82

4

5

OOR Selective Non-Ported Landing Nipple is a tubing nipple for use with selectivelocking devices only.

The OOR Nipple is designed to be used in the heaviest weight, higher ratedpressure tubing. It has a Polished Seal bore and a locking groove.

OOR nipple locates, seals, and retains flow control accessories. Theaccessories are run and retrieved on slickline.

OOR Landing Nipples are typically located above MORN Bottom No-GoLanding Nipples.

OOR Landing NippleSelective (Non-Ported)

• Triple groove locking groove ensures higher pressure ratings.• Multiple different seal bore sizes allow for numerous ID options.

Benefits

Applications

• Used to Land Instrument (Bomb) Hangers.• Used to Land Blanking Plugs.• Used to Land Check (Standing) Valves. • Used to Land Injection Valves.• Used to Land Bottom Hole Chokes.

ORDERING EXAMPLE: Product No. OIL-OORLN-3500-2380 OOR" LANDING NIPPLE SELECTIVE EUE 8 Rd Box x Pin for 4.7 Iblft tubing.

6

OOR Landing NippleSelective (Non-Ported)

Tubing O.D. Seal BoreMin O.D.

Box by Pin Threadsin. mm. in. mm. in. mm.

1.315 33.40 0.714 18.14 1.900 48.26

1.660 42.15 1.125 28.58 2.200 55.88

1.900 48.26 1.375 34.93 2.500 63.50

2-3/8 60.33

1.500 38.10

3.063 77.80

1.625 41.28

1.710 43.43

1.781 45.24

1.781 45.24

1.875 47.63

2-7/8 73.03

1.905 48.39

3.668 93.17

1.940 49.28

2.000 50.80

2.125 53.98

2.188 55.58

2.313 58.75

3-1/2 88.90

2.380 60.45

4.500 114.302.437 61.90

2.562 65.07

5.875 73.03

7

OORN Bottom No-Go Non-Ported Landing Nipple is a tubing nipple for use with bottom no-golocking devices only. The OORN Nipple is designed to be used in the heaviest weight, higherrated pressure tubing. It has a seal bore, bottom no-go shoulder, and a locking groove.

The Model OORN nipple locates, seals, and retains flow control accessories that have a bottomno-go locking device. The accessories are run and retrieved on slickline.

OORN Landing Nipples are typically located at the bottom of the tubing string as the last profile,with only a slickline re-entry guide lower in the tubing string.

When placing a OORN Bottom No-Go Landing Nipple in the work string ensure that the OORN isthe last landing nipple in the completion string.

OORN Landing NippleNon-Selective (Bottom No-Go)

• The Bottom No-Go ensures simple & positive landing of slickline tools.• The Bottom No-Go prevents the loss of slickline tools.

Benefits

Applications

• Used to Land Instrument (Bomb) Hangers.• Used to Land Blanking Plugs.• Used to Land Check (Standing) Valves. • Used to Land Injection Valves.• Used to Land Chokes.

ORDERING EXAMPLE: Product No. OIL-OORNLN-4500-3688 OORN" LANDING NIPPLE NON-SELECTIVE EUE 8 Rd Box x Pin for 4.7 Iblft tubing.

8

OORN Landing NippleNon-Selective (Bottom No-Go)

Tubing O.D. Seal Bore No-GoMin O.D.

Box by Pin Threads

in. mm. in. mm. in. mm. in. mm.1.900 48.26 1.375 34.93 1.250 31.75 2.500 63.50

2-3/8 60.33

1.500 38.10 1.500 38.10

3.063 77.801.710 43.43 1.560 39.62

1.781 45.24 1.640 41.66

1.875 47.63 1.716 43.59

2-7/8 73.03

2.000 50.80 1.881 47.78

3.668 93.172.125 53.98 1.937 49.20

2.188 55.58 2.010 51.05

2.313 58.75 2.130 54.13

3-1/2 88.902.562 65.07 2.329 59.16

4.500 114.302.875 73.03 2.585 65.66

4.000 101.603.125 79.38 2.907 73.84

5.000 127.003.250 82.55 3.088 78.44

4-1/2" 114.30 3.688 93.68 3.456 87.78 5.563 141.30

5.000 127.004.000 101.60 3.748 95.20

Coupling OD

4.125 104.78 3.912 99.36

5-1/2 139.70

4.313 109.55 3.987 101.27

4.562 115.87 4.445 112.90

4.750 120.65 4.521 114.83

4.813 122.25 4.725 120.02

6.000 152.40 5.250 133.35 5.018 127.46

9

OX Landing Nipples are fully selective nipples, used to land, lock and seal X-typelocking mandrels with attached flow control devise in the production tubing string.

The internal profile of OX Landing Nipples includes a selective profile, a lockingrecess, and a polished seal bore.

When installed, the locking dogs in the X-type lock move out into the recess of thenipple, anchoring the lock and positioning the lock packing in the polished seal boresection of the nipple.

OX Landing Nipples are made from 4140, L-80 low alloy steel, 9Cr 1MoSteel.

OX Landing NipplesSelective

ORDERING EXAMPLE: Product No. OIL-OXLNS-2063-1625 OXLNS" LANDING NIPPLE SELECTIVE EUE 8 Rd Box x Pin for 4.7 Iblft tubing.

Tubing O.D. Seal BoreMin O.D.

Box by Pin Threads

in. mm. in. mm. in. mm.

1.660 42.15 1.250 31.75 2.200 55.88

1.900 48.26 1.500 38.10 2.500 63.50

2.063 53.37 1.625 41.27 2.325 59.06

2.375 60.33 1.875 47.62 3.063 77.80

2.875 73.02 2.312 58.72 3.668 93.17

3.500 88.902.750 69.85

4.500 114.302.812 71.42

4.500 114.30 3.812 96.82 5.563 141.30

10

OXN Landing Nipples are non selective nipples, used to land, lock and seal XN-typelocking mandrels with attached flow control devise in the production tubing string.

The internal profile of OXN Landing Nipples includes a No-Go profile, a lockingrecess, and a polished seal bore.

When installed, the locking dogs in the XN-type lock move out into the recess of thenipple, anchoring the lock and positioning the lock packing in the polished seal boresection of the nipple.

OXN Landing Nipples are made from 4140, L-80 low alloy steel, 9Cr 1MoSteel.

OXN Landing Nipples (No-Go)Non-Selective

ORDERING EXAMPLE: Product No. OIL-OXNLN-3500-2812 OXNLN" LANDING NIPPLE NON SELECTIVE EUE 8 Rd Box x Pin for 4.7 Iblft tubing.

Tubing O.D. Seal Bore No-GoMin O.D.

Box by Pin Threads

in. mm. in. mm. in. mm. in. mm.

1.660 42.15 1.250 31.75 1.135 28.83 1.890 48.01

1.900 48.26 1.500 38.10 1.448 36.78 2.130 54.10

2.063 53.37 1.625 41.27 1.536 39.01 2.340 59.44

2.375 60.33 1.875 47.62 1.791 45.49 2.710 68.83

2.875 73.02 2.312 58.72 2.205 56.01 3.230 82.04

3.500 88.902.750 69.85 2.635 66.93

4.250 107.952.812 71.42 2.666 67.72

4.500 114.30 3.812 96.82 3.725 94.62 4.940 125.48

11

OL Sliding Sleeve (Selective)For standard well environment

OL sliding sleeve is a device used to establish communication, when desired,between the tubing and annulus.

OL Sliding Sleeve has seal bores above and below the ports, and a top No- Goshoulder and locking groove.

The OL sliding sleeve locates, seals and retains Top No-Go controlaccessories.

OL SLIDING SLEEVE SPECIFICATIONS

Tubing O.D. OL Sliding Sleeve

in. Sealbore I.D. Size Sleeve O.D (in)

1.9001.437 1.43

2.3751.500 1.50

2-3/8

1.781 1.78

2.9101.812 1.81

1.875 1.87

2-7/82.250 2.25

3.4102.312 2.31

3-1/22.750 2.75

4.5002.812 2.81

4-1/23.688 3.68

5.5003.812 3.81

ORDERING EXAMPLE: Product No. OIL-OLSS-1900-1500 OL" Sliding Sleeve EUE 8 Rd Box x Pin.

12

OXA - Sliding SleeveSelective

OXA Sliding Sleeve is a communication device with a ported inner sleeve that canbe opened or closed using a shifting tool by standard slickline or coiled tubingmethods. Equalizing holes in the inner sleeve provide pressure equalizationbetween the tubing and casing annulus as the sleeve is opened. The Sliding Sleeveis made up to and forms part of the tubing string.

The OXA Sliding Sleeve is a shift-up-to-open tool.

• Compact and simple field proven design.• Standard OXA Sliding Sleeve is manufactured using 4140 18-22Rc

Alloy Steel with Viton elastomers for Standard and H2S Service.• OX Selective Nipple Profile to land slickline tools.

Benefits

Technical Details

• Minimum ID: Seal Bores.• Opening Direction: UP• Drift Diameter: 0.0010" to 0.0015" smaller than seal bore Min. I.D.• Shifting Tools: "B" & "BO"• Separation Sleeve: OXS• Blanking Plug: OPX• Standing Valve: OVX

ORDERING EXAMPLE: Product No. OIL-OXASS-1875-3063 OXA Sliding Sleeve.

13

OXA - Sliding SleeveSelective

Seal BoreFlow Area

(Ports)Flow Area (Min ID) Max OD

Shifting Tool Bin. Sq in. Sq cm. Sq in. Sq cm. in.

1.875 2.355 15.19 2.762 17.82 3.063 1.88

2.312 3.974 25.64 4.199 27.09 3.668 2.31

2.7507.212 46.53

5.940 38.32 4.281 2.75

2.812 6.211 40.07 4.281 2.81

3.31211.426 73.72

8.611 55.55 5.680 3.25

3.812 11.413 73.63 5.680 3.81

4.31210.598 68.37

14.596 94.17 6.400 4.31

4.562 16.337 105.40 7.500 4.56

ORDERING EXAMPLE: Product No. OIL-OXASS-1875-3063 OXA Sliding Sleeve.

14

OXA - Sliding SleeveNon-Elastomeric

Non Elastomeric Seals

Non Elastomeric Seals

Pin Connection

Box Connection

15

OXA Non-Elastomeric Sliding Sleeve is a communication device with a portedinner sleeve that can be opened or closed using a shifting tool by standardslickline or coiled tubing methods. Equalizing holes in the inner sleeve providepressure equalization between the tubing and casing annulus as the sleeve isopened.

The OXA Sliding Sleeve is a shift-up-to-open tool.

The OXA Non-Elastomeric Sliding Sleeve is designed for use in high temperaturewells to establish a means of communication between the tubing string and thecasing annulus for single-tubing or multiple-tubing string completions.

OXA Sliding Sleeve may be used for directing flow from the casing to the tubingin alternate or selective completions. Other applications include killing a well,spot acidizing and fracturing, or equalizing pressure between an isolatedformation and the tubing string.

Technical Details

• Temperature Rating: 350oF .• Pressure Rating: 7,000 Psi.• V-Packings: Non Elastomeric material. All O-rings are Viton.• Shifting Tools: "B" & "BO"• Metallurgy: L-80, 18-22 HRc as standard body material• Metallurgy: 9Cr. 1Mo. & 13Cr. body material also available.• Suitable for Well Environment: H2S & Co2 as per NACE MR-01-75.

OXA - Sliding SleeveNon-Elastomeric

ORDERING EXAMPLE: Product No. OIL-OXASSNE-1875-3063 OXA Sliding Sleeve Non- Elastomeric.

16

OXA - Sliding SleeveNon-Elastomeric

Seal BoreFlow Area

(Ports)Flow Area (Min ID) Max OD

Shifting Tool Bin. Sq in. Sq cm. Sq in. Sq cm. in.

1.875 2.355 15.19 2.762 17.82 3.063 1.88

2.312 3.974 25.64 4.199 27.09 3.668 2.31

2.7507.212 46.53

5.940 38.32 4.281 2.75

2.812 6.211 40.07 4.281 2.81

3.31211.426 73.72

8.611 55.55 5.680 3.25

3.812 11.413 73.63 5.680 3.81

4.31210.598 68.37

14.596 94.17 6.400 4.31

4.562 16.337 105.40 7.500 4.56

ORDERING EXAMPLE: Product No. OIL-OXASSNE-1875-3063 OXA Sliding Sleeve Non- Elastomeric.

17

OXO - Sliding Sleeve(Jar Down to Open)

Open Position

Pin Connection

Box Connection

18

OXO Sliding Sleeve is a communication device with a ported inner sleeve thatcan be opened or closed using a shifting tool by standard slickline or coiledtubing methods. Equalizing holes in the inner sleeve provide pressureequalization between the tubing and casing annulus as the sleeve is opened. TheSliding Sleeve is made up to and forms part of the tubing string.

The OXO Sliding Sleeve is a shift-down-to-open tool.

OXO - Sliding Sleeve(Jar Down to Open)

• Compact and simple field proven design.• Standard OXO Sliding Sleeve is manufactured using 4140 18-22Rc

Alloy Steel with Viton elastomers for Standard and H2S Service.• OX Selective Nipple Profile to land slickline tools.

Benefits

Technical Details

• Minimum ID: Seal Bores.• Opening Direction: UP• Drift Diameter: 0.0010" to 0.0015" smaller than seal bore Min. I.D.• Shifting Tools: "B" & "BO"• Separation Sleeve: OXS• Blanking Plug: OPX• Standing Valve: OVX

ORDERING EXAMPLE: Product No. OIL-OXOSSJD-1875-3063 OXA Sliding Sleeve Jar Down to Open.

19

Seal BoreFlow Area

(Ports)Flow Area (Min ID) Max OD

Shifting Tool Bin. Sq in. Sq cm. Sq in. Sq cm. in.

1.875 2.355 15.19 2.762 17.82 3.063 1.88

2.312 3.974 25.64 4.199 27.09 3.668 2.31

2.7507.212 46.53

5.940 38.32 4.281 2.75

2.812 6.211 40.07 4.281 2.81

3.31211.426 73.72

8.611 55.55 5.680 3.25

3.812 11.413 73.63 5.680 3.81

4.31210.598 68.37

14.596 94.17 6.400 4.31

4.562 16.337 105.40 7.500 4.56

OXO - Sliding Sleeve(Jar Down to Open)

ORDERING EXAMPLE: Product No. OIL-OXOSSJD-1875-3063 OXA Sliding Sleeve Jar Down to Open.

20

OFB-2 Top No-Go Standing ValveORB-2 Bottom No-Go Standing Valve

OFB-2 & ORB-2 Equalizing Standing Valves are complete equipment units,without any Locking Device.

- OFB-2 is run in all sizes ‘OF’ Nipples and all sizes ‘OL’ Sliding Sleeves- ORB-2 is run in Bottom No-Go of ‘OR’ Nipples

Both models are run into a Nipple Profile and hold pressure from above only.

The ‘OFB-2' model lands on the top of a ‘OF' Nipple Profile sealbore. The ‘ORB2'model seats on the Bottom No-Go Shoulder of a ‘OR' Nipple.

A ‘C-1’ Running Tool is used to run both valve assemblies. Both models can beequalized prior to retrieval, by shifting open the Equalizing Mandrel Ports.

Standard Pulling Tool is utilized for retrieval of these valves.

• Can be used as a plug to pressure test tubing.• To set hydraulically actuated packer with the check valve positioned

below the packer.• For gas lift operations.• To be used as a standing valve in wells with ESP installation

Applications

21

OX & OXNLock Mandrels

OX Lock Mandrel that is selective by running tool to land and lock insideOX series landing nipples.

The OXN is a No-Go lock mandrel that is selective by running tool to land and lock inside OXN series landing nipples.

Featuring Non-Elastomeric seals stack for standard and sour well environment to defy HTHP situations.

Connections: Internal fishing neck on top & Pin connection below.Metallurgy: L-80, 9Cr. 1Mo., 13Cr. 80Ksi. As per NACE MR-01-75

Sealbore I.D. Nipple Profile Seal Stack Type

2.313 OX Profile Chevron V-Seals

2.750OX Profile Chevron V-Seals

2.813

3.688OX Profile Chevron V-Seals

3.813

OXN Lock Mandrels No-Go Type

Sealbore I.D. Nipple Profile Seal Stack Type

2.313 OXN Profile Chevron V-Seals

2.750OXN Profile Chevron V-Seals

2.813

3.688OXN Profile Chevron V-Seals

3.813

Oilog, Inc10370 Richmond Ave. Ste 895.

Houston, TX 77042

General Information at: info@oilog.us

Slide Number 1Slide Number 2Slide Number 3Slide Number 4Slide Number 5Slide Number 6Slide Number 7Slide Number 8Slide Number 9Slide Number 10Slide Number 11Slide Number 12Slide Number 13Slide Number 14Slide Number 15Slide Number 16Slide Number 17Slide Number 18Slide Number 19Slide Number 20Slide Number 21Slide Number 22Slide Number 23Slide Number 24