Floridia Produzione Avviatori Elettrici | Industry production Electric Starters
description
Transcript of Floridia Produzione Avviatori Elettrici | Industry production Electric Starters
No
vità
201
3-20
14Avviatori ElettriciElectric Starters
11
Accessori cablati: Wired accessoriesvedi pag. 108 see page108
COMPOSITION:
• IP55 metal sheet cabinet, RAL 7035• Door interlock switch disconnector• Fuses for each electric motor• Inverter VLT ®• Integrated RFI filters•• Braking chopper incorporated (starting 2HP) • Control kit remote control keypad• Contactor• Thermal relay• 400/24 V safety transformer for auxiliary circuit• Protective fuses for transformer and auxiliarcircuit• AUT-0-MAN selector switch•• Green warning light (running)• Red warning light (overload)• 2 grids• Action programming• Terminal board• Pressure transducer in stainless steel, IP67 4÷20 mA 0-10 bar or 0-16 bar Cable 2 m long• Instruction book• Cable long: shielded cable 15mt unshielded 50mt
COMPOSIZIONE: • Cassa in lamiera, IP55, RAL 7035 • Interruttore di manovra-sezionatore bloccoporta • Fusibili per ciascun motore elettrico • Inverter VLT ® •• Filtri RFI integrati • Chopper di frenatura incorporato (da 2 HP in poi) • Kit tastierino remoto • Contattore • Relè termico • Trasformatore di sicurezza 400/24 V per circuito ausiliario • Fusibili per protezione trasformatore e circuito ausiliario •• Selettore AUT-0-MAN • Spia luminosa verde (marcia) • Spia luminosa rossa (blocco) • 2 griglie di areazione • Programmazione dell’azionamento • Morsettiera • Trasduttore di pressione in acciaio inox, IP67 4÷20 mA 0-10 bar o 0-16 bar 2 m di cavo • Libretto d’istruzioni • Lunghezza cavi al motore: schermati 15mt non schermati 50mt
*Imax – targa motore maxCaratteristiche elettriche per singolo motore The electric characteristics are valid for a single motor Importante! Per elettropompe sommerse prevedere una taglia superiore.Important! It’s necessary to expect a larger size for submersible pumps.Important! It’s necessary to expect a larger size for submersible pumps.
HDM HYDRODRIVE INVERTER MONOFASE E 1 AVVIAMENTO A FREQUENZA FISSASINGLE-PHASE HYDRODRIVE FREQUENCY CONVERTER WITH FIXED FREQUENCY START
HDT HYDRODRIVE INVERTER TRIFASE E 1 AVVIAMENTO A FREQUENZA FISSATHREE-PHASE HYDRODRIVE FREQUENCY CONVERTER WITH FIXED FREQUENCY START
HDM2P/HDT2P
01
02
*Imax – targa motore maxCaratteristiche elettriche per singolo motore
The electric characteristics are valid for a single motor Importante! Per elettropompe sommerse prevedere una taglia superiore.Important! It’s necessary to expect a larger size for submersible pumps.
Accessori cablati: Wired accessoriesvedi pag. 108 see page108
COMPOSITION:
• IP55 metal sheet cabinet, RAL 7035• Door interlock switch disconnector• Fuses for each electric motor• Inverter VLT ®• Integrated RFI filters•• Braking chopper incorporated (starting 2HP) • Control kit remote control keypad• 4 contactors• 2 thermal relays• 400/24 V safety transformer for auxiliary circuit• Protective fuses for transformer and auxiliary circuit• 2 AUT-0-MAN selector switchs•• Switchboard for 2 electric motors • Green warning light (running)• 2 red warning lights (overload)• Auxiliary relay• 2 grids• Action programming• Terminal board•• Pressure transducer in stainless steel, IP67 4÷20 mA 0-10 bar or 0-16 bar Cable 2 m long• Instruction book• Cable long: shielded cable 15mt unshielded 50mt
COMPOSIZIONE: • Cassa in lamiera, IP55, RAL 7035 • Interruttore di manovra-sezionatore bloccoporta • Fusibili per ciascun motore elettrico • Inverter VLT ® •• Filtri RFI integrati • Chopper di frenatura incorporato (da 2 HP in poi) • Kit tastierino remoto • 4 contattori • 2 relè termici • Trasformatore di sicurezza 400/24 V per circuito ausiliario • Fusibili per protezione trasformatore e circuito ausiliario •• 2 selettori AUT-0-MAN • Centralina per alternanza 2 motori elettrici • 4 spie luminose verdi (marcia) • 2 spie luminose rosse (blocco) • Relè ausiliario • 2 griglie di areazione • Programmazione dell’azionamento •• Morsettiera • Trasduttore di pressione in acciaio inox, IP67 4÷20 mA 0-10 bar o 0-16 bar 2 m di cavo • Libretto d’istruzioni • Lunghezza cavi al motore: schermati 15mt non schermati 50mt
*Imax – targa motore maxCaratteristiche elettriche per singolo motore The electric characteristics are valid for a single motor Importante! Per elettropompe sommerse prevedere una taglia superiore.Important! ItImportant! It’s necessary to expect a larger size for submersible pumps..
HDMA2P HYDRODRIVE INVERTER MONOFASE CON ALTERNANZA DI 2 MOTORI ELETTRICISINGLE-PHASE INVETER HYDRODRIVE WITH ALTERNANCE’S 2 ELELECTRICS MOTORS
HDTA2P HYDRODRIVE INVERTER TRIFASE CON ALTERNANZA DI 2 MOTORI ELETTRICITHREE-PHASE INVETER HYDRODRIVE WITH ALTERNANCE’S 2 ELELECTRICS MOTORS
HDMA2P/HDTA2P
03
04
*Imax – targa motore maxCaratteristiche elettriche per singolo motore
The electric characteristics are valid for a single motor Importante! Per elettropompe sommerse prevedere una taglia superiore.Important! It’s necessary to expect a larger size for submersible pumps.
RELÈ MINIMA E MASSIMA CORRENTEUNDERCURRENT-OVERCURRENT RELAY
Caratteristiche tecniche
Tensione di alimentazione: 24Vac, 50÷60Hz 35 mA max Ingresso: TA /5A Uscita: Contatto in scambio con polo comune 24Vac 2A max Dimensioni: H90xL35xP73 Contenitore:Contenitore: Modulare DIN 43880 (2 moduli) Grado di protezione: IP20 LED verde: Ritardo rientro rete e segnalazione alimentazione LED giallo: Segnalazione controllo e segnalazione errore
Ritardo rientro rete: Regolabile 15 sec÷30 min (trimmer) Minima corrente:Minima corrente: Regolabile 20÷100 % (trimmer) Massima corrente: Regolabile 20÷100 % (trimmer) Ritardo segnalazione errore: Regolabile 1÷30 sec (trimmer) Ritardo riarmo automatico: Regolabile 15 sec÷30 min (trimmer)
Caratteristiche tecniche
Feeding voltage: 24Vac, 50÷60Hz 35 mA max Input: TA /5A Output: Contact in exchange with common pole 24Vac 2A max Dimensions: H90xW35xD73 Container: Container: Modulate DIN 43880 (2 modules) Protection degree: P20 LED green: Delay return of network and supply signaling Signaling control and signaling errror Delay return of network:Delay return of network: Adjustable 15÷30 sec. (trimmer) Minimum current: Adjustable 20÷100 % (trimmer)Maximum current: Adjustable 20÷100 % (trimmer)Signaling error delay: Adjustable 1÷30 sec (trimmer)Automatic reset delay: Adjustable 15 sec÷30 min (trimmer)
MMC
05
> Ufficio tecnico: tel.: +39 (0)95 798 18 72 cell.: +39 347 519 62 15 e-mail settore elettromeccanico: [email protected] e-mail settore elettronico: [email protected]
> Ufficio commerciale: tel.: +39 (0)95 798 18 69 tel.: +39 (0)95 798 18 69 fax: +39 (0)95 798 11 44 cell.: +39 347 519 62 13 e-mail generica: [email protected] e-mail contabilità: [email protected]
> Sede principale: Luigi Floridia C.da Tre Fontane - Asse B C.da Tre Fontane - Asse B 95047 Paternò (CT) Italia
www.floridia.it