FLOOR RAILINGS, STAIR RAILINGS AND/OR WALL ...public.bocani.com/pdfs/Bocani-Taking...
4
FLOOR RAILINGS, STAIR RAILINGS AND/OR WALL MOUNTED HANDRAILS To quickly know the approximate price of your project, simply provide some information about your configuration. Our calculator tool allows you to receive an estimate, regardless of the complexity of the project. STEP 1 ESTIMATE Each project has one (1) or more SECTIONS, which include one (1) or more continuous SEGMENTS. Three (3) types of segments are available: FLOOR, STAIRS and WALL. THIS STEP ONLY REQUIRES APPROXIMATE MEASUREMENTS. THE EXACT PRICE AND THE LIST OF MATERIALS WILL BE VALIDATED BY 3D PLAN IN STEP 2, THEN FINALIZED IN STEP 3. PROJECT EXAMPLE This project has three (3) sections. The first section is assembled from three (3) continuous segments (A, B and C). The first two segments (A and B) are FLOOR types. The 3rd segment (C) is a STAIRCASE type. The second section has only one (1) segment (D), a FLOOR type. The third section has only one (1) segment (E), a WALL type.
Transcript of FLOOR RAILINGS, STAIR RAILINGS AND/OR WALL ...public.bocani.com/pdfs/Bocani-Taking...
FLOOR RAILINGS, STAIR RAILINGS AND/OR WALL MOUNTED HANDRAILS
To quickly know the approximate price of your project, simply provide some information about your configuration. Our calculator tool allows you to receive an estimate, regardless of the complexity of the project.
STEP 1 ESTIMATE
Each project has one (1) or more SECTIONS, which include one (1) or more continuous SEGMENTS.
Three (3) types of segments are available: FLOOR, STAIRS and WALL.
THIS STEP ONLY REQUIRES APPROXIMATE MEASUREMENTS. THE EXACT PRICE AND THE LIST OF MATERIALS WILL BE VALIDATED BY 3D PLAN IN STEP 2, THEN FINALIZED IN STEP 3.
PROJECT EXAMPLE
This project has three (3) sections.
The first section is assembled from three (3) continuous segments (A, B and C). The first two segments (A and B) are FLOOR types. The 3rd segment (C) is a STAIRCASE type.
The second section has only one (1) segment (D), a FLOOR type.
The third section has only one (1) segment (E), a WALL type.
The information to send to us for this configuration is as follows:
Upon receipt of this information, a detailed estimate will be sent to you by email. You will then be able to contact us to know different material options and/or to leave us a deposit, which will allow us to proceed to step 2.
SECTION 1
SEGMENT A
• FLOOR• 113"
SEGMENT B
• FLOOR• 48 3/4"
SEGMENT C
• STAIRS• 91 3/8"
SECTION 2
SEGMENT D
• FLOOR• 82 1/2"
SECTION 3
SEGMENT E
• WALL• 113"
STEP 2 VALIDATION OF THE PROJECT BY PLAN
Once satisfied with the estimate received, you can confirm the order with the deposit. Then a plan will be sent to you (see below). This will be used to confirm measurements and make adjustments if necessary. This example shows, as a reference, the same project from step 1:
Once validated and approved, your project is sent to production, step 3.
STEP 3 ASSEMBLY AND FINAL DOCUMENT
Once approved, your quote is updated with the list of materials, as well as the final price (which should not vary much from the original estimate). Your project is then assembled and some custom-made items, such as handrails and rods, are cut using the approved document in Step 2 as a reference. To do this, a document is created. This is included with your order and will serve to identify the location of the components of your project.
Here is an example of that document:
