Floang, Trunnion Mounted and Top Entry Ball...
Transcript of Floang, Trunnion Mounted and Top Entry Ball...
Cast and Forged SteelFloating, Trunnion Mountedand Top Entry Ball Valves
Vahn-Tech steel ball valves are designed to provide maximum service life and durability.All ball valves have full port design and are manufactured to the American Petroleum Institute Standards API 608 & API 6D, British Standards BS 5351 and also conform to the American Society of Mechanical Engineer’s Standard ASME B16.34.
Design Materials
Modi cations Available
L V G A E A
S P L IT 3- P IE C E
F B R B
R F R T J B W
STD TEFLO N GRAPH ITE
BPS
AS
FD
A
B
C
D
E
F
G
H
A Operation BoreC End ConnectionsD
E Packing
Body & BonnetB
F B PS ASG FSH
Floating Ball Valve, Cast Steel
Standard body/bonnet materials include nine grades of carbon, low alloy and stainlesssteel. For special applications, they can be supplied in other grades of alloy and stainless steel. Trim, packing and gasket materials can be selected from a wide rangeto match service conditions.
Material of TrimEnd connectionsPacking and Gasket MaterialOperator MountingHandwheel Extensions
Pressure EqualizingAnti-Static or Fire Safe DesignCustomer Speci ed CoatingsWelded EndsOxygen & Chlorine Cleaning & Packaging
Extended lever for easy operationalso available with gear box, motoractuators, pneumatic or hydraulicactuators.
Split or 3-piece, split body & bonnet for12” and smaller sizes. This enableseasy disassemble of components for repair.
Full bore or reduced bore. Full bore design provides exceptional owcontrol.
A choice of RTF anged or buttweld ends for piping exibility.
Standard packing vs. te on packingcombined with live loading, maintainspacking compression under high cycleand sever service applications. Graphitepacking is used for high temperaturesituations.
Blow-out proof stem. A pressure-safe stem shoulder design protects against failure under excess pressure.
Anti-static - A metallic contact is always
granted between ball and stem/body
to discharge eventual static build-ups
during service.
Fire safe designed to API 607 or
BS 6755 to ensure operation
sustainability in case of re. Secondary
metal-to-metal seal acts as backup if
primary seal is destroyed by re. Valves
ordered for compliance with API 607
will be provided with graphite packing
and gaskets.
1
Applicable Standards:STEEL BALL VALVE ISO 14313FIRE SAFE, API 607
Design Details:
L(RF)
L1(BW)
H
W
wt(kg) R F
1 23
4
5 6 78
9
10
11
12
13
W
L
H
NP
S
L 1
M aterials of PartsNo Part Name Carbon S teel AS TM M aterials
18Cr- 9Ni- 2M oCarbon S teel
123456789
10111213
BodyBonnet
BallStem
Seat RingBonnet Gasket
Bonnet studBonnet Stud Nut
PackingGland Flange
Gland BoltStop Plate
Handle
A216- WCBA216- WCB
1)A182- F304A276- 304
2)Graphite+304A193- B7A194- 2H
A216- WCBA193- B7
Carbon Steel
A351- CF8MA351- CF8MA182- F316A276- 316
R.PTFEPTFE
A193- B8A194- 8
PTFEA351- CF8M
A193- B8Carbon steel+Zn
Carbon Steel
A352- LCBA352- LCB
1)A182- F304A276- 304
2)Graphite+304A320- L7A194- 4
A352- LCBA193- B7
Carbon Steel
Note:1)A105+EN P optional 2)Sp iral wound construction.
Dimensional datas of ANS I Class 150LbNPS DN 15
4.251085.501402.12555
1302.31.8
3/420
4.621176.001522.12555
1303
2.8
125
5.001276.501652.75706
1604.53.7
11 /240
6.501657.501903.50908
2007
6.2
250
7.001788.502164.1210514
3509.58.5
12 /265
7.501909.502416.1215516
4001514
380
8.00203
11.122837.2518520
5001921
41009.00229
12.003058.0020520
5003335
6150
15.50394
18.00457
10.0025524
6009398
8200
18.00457
20.50521
11.0028032
800160170
10250
21.00533
22.00559
13.5034532
800200225
12300
24.00610
25.00635
16.5042032
800280295
inmm
inmm
inmm
inmm
inmm
BW
1 2/
Floating Ball Valve, Cast Steel 150Lb
STEEL BALL VALVES API 609/API 6D
ANTI STATIC, API 608STEEL VALVES, ASME B16.34FACE TO FACE, ASME B16.10END FLANGES, ASME B 16.5BUTTWELDING ENDS, ASME B 16.25INSPECTION AND TEST, API 598/API 6D
FULL PORT DESIGNBG BOLTED BONNET/SPLIT BODYFLOATING BALL TYPEBLOW-OUT PROOF STEMFIRE DURABLE CONSTRUCTIONANTISTATIC DEVICESTOPPER DEVICEISO 5211 MOUNTING PADFLANGED OR BUTTWELDING ENDSAVAILABLE WITH WG OPERATOR
2
L(RF)
L1(BW)
H
W
wt(kg) R F
NPS DN 15
5.501405.501402.12555
1302.51.8
3/420
6.001526.001522.12555
1303.52
125
6.501656.501652.75706
1605.53.2
11 /240
7.501907.501903.50908
20010.55.5
250
8.502168.502164.1210514
35014.58.7
12 /265
9.502419.502416.1215316
40023.515
380
11.12283
11.122837.2518720
5003018
4100
12.00305
12.003058.0020620
5005536
6150
15.88403
18.00457
10.0025524
60011885
8200
19.75502
20.50521
11.0028032
800200152
10250
22.38568
22.00559
13.5034532
800250182
12300
25.50648
25.00635
16.5042032
800330232
inmm
inmm
inmm
inmm
inmm
BW
1 2/Dimension ANS I Class 300Lbal datas of
L/L1(RF/BW)
L2(RTJ)
H
W
wt(kg) R F/RTJ
www.chinaLEA D.c om PAGE - 10
NPS DN 15
6.50165
--
2.3861.5
51303.32.6
3/420
7.50190
--
2.3861.5
61604.53.1
125
8.50216
--
3.00788
2007.24.8
11 /240
9.50241
--
4.0010114
35013.5
8
250
11.50292
11.622954.7512016
400193
12 /265
13.00330
13.123336.8817420
5003122
380
14.00356
14.123598.3821224
6003927
4100
17.00432
17.124359.2523424
6007153
6150
22.00559
22.12562
11.3828932
800153120
��������������
���������������
���������������
inmm
inmm
inmm
inmm
inmm
BW
1 2/
Dimension ANS I Class 600Lbal datas of
1 23
4
5 6 78
9
10
11
12
13
W
L
H
NP
S
L 1
M aterials of PartsNo Part Name Carbon S teel AS TM M aterials
18Cr- 9Ni- 2M oCarbon S teel
123456789
10111213
BodyBonnet
BallStem
Seat RingBonnet Gasket
Bonnet studBonnet Stud Nut
PackingGland Flange
Gland BoltStop Plate
Handle
A216- WCBA216- WCB
1)A182- F304A276- 304
2)Graphite+304A193- B7A194- 2H
A216- WCBA193- B7
Carbon Steel
A351- CF8MA351- CF8MA182- F316A276- 316
R.PTFEPTFE
A193- B8A194- 8
PTFEA351- CF8M
A193- B8Carbon steel+Zn
Carbon Steel
A352- LCBA352- LCB
1)A182- F304A276- 304
2)Graphite+304A320- L7A194- 4
A352- LCBA193- B7
Carbon Steel
Note:1)A105+EN P optional 2)Sp iral wound construction.
Floating Ball Valve, Cast Steel 300Lb/600Lb
Applicable Standards:STEEL BALL VALVE ISO 14313FIRE SAFE, API 607
STEEL BALL VALVES API 608/API 6D
ANTI STATIC, API 608STEEL VALVES, ASME B16.34FACE TO FACE, ASME B16.10END FLANGES, ASME B 16.5BUTTWELDING ENDS, ASME B 16.25INSPECTION AND TEST, API 598/API 6D
Design Details:FULL PORT DESIGNBG BOLTED BONNET/SPLIT BODYFLOATING BALL TYPEBLOW-OUT PROOF STEMFIRE DURABLE CONSTRUCTIONANTISTATIC DEVICESTOPPER DEVICEISO 5211 MOUNTING PADFLANGED OR BUTTWELDING ENDSAVAILABLE WITH WG OPERATOR
3
LV GA E A
GR E AS E - JE T
S PLIT 3- PIE CE
FB R B
R F R TJ BW
S TD PACKING TE FLON GR APHITE
S LB/BPS
AS
FS
S TD GAS KE T DOU- GAS KE T
Floating Ball Valve, Forged Steel
A
B
C
D
E
F
G
H
I
J
A Operation D B Grease-jet Joint E End Connections
F G S LB
BPS
H AS I FS J Gasket
Vahn-Tech steel ball valves are designed to provide maximum service life and durability.All ball valves have full port design and are manufactured to the American Petroleum Institute Standards API 608 & API 6D, British Standards BS 5351 and also conform to the American Society of Mechanical Engineer’s Standard ASME B16.34.
Design MaterialsStandard body/bonnet materials include nine grades of carbon, low alloy and stainlesssteel. For special applications, they can be supplied in other grades of alloy and stainless steel. Trim, packing and gasket materials can be selected from a wide rangeto match service conditions.
Material of TrimEnd connectionsPacking and Gasket MaterialOperator MountingHandwheel Extensions
Pressure EqualizingAnti Static or Fire Safe Design
Welded EndsOxygen & Chlorine Cleaning & Packaging
Extended lever for easy operationalso available with gear box, motoractuators, pneumatic or hydraulicactuators.
Installed in the respective
part according to the
application and satis ed
with ecumenical situations
and realize seal in spot with
maintenance easily.
Body & BonnetC Split or 3-piece, split body &
bonnet for 12” and smaller
sizes. This enables easy
disassemble of components
for repair.
Bore Full bore or reduced bore.
Full bore design provides
exceptional ow control.
A choice of RTF anged or
buttweld ends for piping exibility.
Packing
combined with live loading, maintainspacking compression under high cycleand sever service applications. Graphitepacking is used for high temperaturesituations.
Self-lubricated bearing. Easy
operation, low torque and
longer life.
Blow-out proof stem. A
pressure-safe stem shoulder
design protects against
failure under excess pressure.
Anti-static - A metallic contact
is always granted between
ball and stem/body to discharge
eventual static build-ups during
service.
Fire safe designed to API 607
or BS 6755 to ensure operation
sustainability in case of re.
Secondary metal-to-metal
seal acts as backup if primary
seal is destroyed by re. Valves
ordered for compliance with
API 607 will be provided with
graphite packing and gaskets.
Standard gasket or double
gasket. Standard gasket
adopts high-performance
rubber seal ring. Double
gasket adopts high perfor-
mance rubber seal ring and
spiral wound graphite.
8
NP
S
H
L
W
1
2
3
4
5
6
7
8
9
10
11
12
13
L 1
M aterials of partsNo Part Name Carbon S teel AS TM M aterials
18Cr- 9Ni- 2M oCarbon S teel
123456789
10111213
BodyBonnet
BallStem
Seat RingBonnet Gasket
Bonnet StudBonnet Stud Nut
PackingGland Flange
Gland BoltStop Plate
Handle
A105A105
1)A182- F304A276- 304
2)Graphite+304A193- B7A194- 2H
A105A193- B7
Carbon Steel
A182- F316A182- F316A182- F316A276- 316
R.PTFEPTFE
A193- B8A194- 8
PTFEA182- F316
A193- B8Carbon Steel+Zn
Carbon Steel
A350- LF2A350- LF2
1)A182- F304A276- 304
2)Graphite+304A320- L7A194- 4
A350- LF2A193- B7
Carbon Steel
Note:1)A105+EN P optional 2)Sp iral wound construction.
Floating Ball Valve, Forged Steel, 150Lb
L(RF)
L1(BW)
H
W
wt(kg) R F
Dimension ANS I Class 150Lbal datas ofNPS DN 15
4.251085.501402.12558
2003.12.6
3/420
4.621176.001522.12558
2004.13.9
125
5.001276.501652.506512
3006
5.2
11 /2
406.501657.501903.388512
3009.58.7
250
7.001788.502164.0010016640012.811.8
12 /2
657.501909.502416.0015016
4002019
380
8.00203
11.122837.0018024
6002628
41009.00229
12.003059.2523524
6004547
6150
15.50394
18.004579.8825024
600126131
8200
18.00457
20.50521
11.0028024
600216226
10250
21.00533
22.00559
12.6232032
800270295
12300
24.00610
25.00635
15.3839032
800378393
inmm
inmm
inmm
inmm
inmm
BW
1 2/
Applicable Standards:STEEL BALL VALVE ISO 14313FIRE SAFE, API 607
Design Details:STEEL BALL VALVES API 609/API 6D
ANTI STATIC, API 608STEEL VALVES, ASME B16.34FACE TO FACE, ASME B16.10END FLANGES, ASME B 16.5BUTTWELDING ENDS, ASME B 16.25INSPECTION AND TEST, API 598/API 6D
FULL PORT DESIGNBG BOLTED BONNET/SPLIT BODYFLOATING BALL TYPEBLOW-OUT PROOF STEMFIRE DURABLE CONSTRUCTIONANTISTATIC DEVICESTOPPER DEVICEISO 5211 MOUNTING PADFLANGED OR BUTTWELDING ENDSAVAILABLE WITH WG OPERATOR
9
L(RF)
L1(BW)
H
W
wt(kg) R F
NPS DN 15
5.501405.501402.12558
2003.52.8
3/420
6.001526.001522.12558
2004.63.1
125
6.501656.501652.506512
3006.74.4
11 /2
407.501907.501903.388512
30010.55.5
250
8.502168.50216
16.0040010
25014.58.7
12 /2
659.502419.50241
16.0040012
30022
13.5
380
11.12283
11.12283
24.0060014
3502917
4100
12.00305
12.00305
24.0060019
4805031
6150
15.88403
18.004579.8825024
600141108
8200
19.75502
20.50521
11.0028024
600242194
10250
22.38568
22.00559
12.6232032
800302234
12300
25.50648
25.00635
15.3839032
800423325
inmm
inmm
inmm
inmm
inmm
BW
1 2/Dimension ANS I Class 300Lbal datas of
L/L1(RF/BW)
L2(RTJ)
H
W
wt(kg) R F
NPS DN 15
6.50165
--
2.25588
2004.53.8
3/420
7.50190
--
2.255812
3005.54.1
125
8.50216
--
2.626812
3008
5.6
11 /2
409.50241
--
3.508916
40012.5
7
250
11.50292
11.622954.1210516
4001812
12 /2
6513.00330
13.123336.2515824
6002718
380
14.00356
14.123597.5019024
6003523
4100
17.00432
17.124359.7524724
6006143
6150
22.00559
22.12562
10.3826232
800172139
inmm
inmm
inmm
inmm
inmm
BW
1 2/
Dimension ANS I Class 600Lbal datas of
L 1
NP
S
H
L
W
1
2
3
4
5
6
7
8
9
10
11
12
13
M aterials of partsNo Part Name Carbon S teel AS TM M aterials
18Cr- 9Ni- 2M oCarbon S teel
123456789
10111213
BodyBonnet
BallStem
Seat RingBonnet Gasket
Bonnet StudBonnet Stud Nut
PackingGland Flange
Gland BoltStop Plate
Handle
A105A105
1)A182- F304A276- 304
2)Graphite+304A193- B7A194- 2H
A105A193- B7
Carbon Steel
A182- F316A182- F316A182- F316A276- 316
R.PTFEPTFE
A193- B8A194- 8
PTFEA182- F316
A193- B8Carbon Steel+Zn
Carbon Steel
A350- LF2A350- LF2
1)A182- F304A276- 304
2)Graphite+304A320- L7A194- 4
A350- LF2A193- B7
Carbon Steel
Note:1)A105+EN P optional 2)Sp iral wound construction.
Floating Ball Valve, Forged Steel, 300Lb/600Lb
Applicable Standards:STEEL BALL VALVE ISO 14313FIRE SAFE, API 607
Design Details:STEEL BALL VALVES API 609/API 6D
ANTI STATIC, API 608STEEL VALVES, ASME B16.34FACE TO FACE, ASME B16.10END FLANGES, ASME B 16.5BUTTWELDING ENDS, ASME B 16.25INSPECTION AND TEST, API 598/API 6D
FULL PORT DESIGNBG BOLTED BONNET/SPLIT BODYFLOATING BALL TYPEBLOW-OUT PROOF STEMFIRE DURABLE CONSTRUCTIONANTISTATIC DEVICESTOPPER DEVICEISO 5211 MOUNTING PADFLANGED OR BUTTWELDING ENDSAVAILABLE WITH WG OPERATOR
10
φ W
W
B
AB W R J
H1
Stem
Bu shing
Bo dy
Pa ck ing
BodyThrust Bearing Stem
Ball
Bo dy Sp ring Se at
Ba ll
Body Se atSe at ring
Ba ll
Flexible graphite is of The stem is designed to preventblow-out should the packing become loose during operation.
The spring relieves pipe stressand heat expansion to ensurestability in operation.
The ball valve can maintain astable working temperaturerange of
rough the co-operation ofthe seat ring and the body,ball valve can maintain a stableoperation in working temperature
-29 C ~ 500 C due to
Worm-gear actuator
Floating Structure, 150Lb/300Lb/600Lb
Floating Structure Series
1/23/4111 /22
NPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
A N S I C la s s 1 50L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
108117127165178
1319253251
60657598
128
200200250350350
2.53.55.87.511
58
112545
191203229394457
6576
100150201
160190210360523
600600700460600
182538
106180
80120150600
1050
12 /23468
1/23/4111 /22
NPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
A N S I C la s s 3 00L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
140152165191216
1319253251
60657598
128
200200250350350
358
1118
1118405790
241383305403502
6576
100150201
160190210360523
600600700600600
304065
122246
160221392
12402100
12 /23468
212 /2
NPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
A N S I C la s s 6 00L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
292330
5165
150180
450450
2845
266504
356432
76100
210270
700600
4065
6441078
34
Note: Worm-gear actuator
1520254050
6580
100150200
6580
100150200
80100
1520254050
5065
high-temperature andis fire resistant.
the co-operation of the seatring and body.
22
Thrust Be aring
Stem
Bo dy
BodySpring
Seat ring
Seat
BallPressure ring
212 /23468
NPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
A N S I C la s s 1 50L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
178191203229394457
516576
100150201
172184196225290320
350400500650460600
16263551
103170
7292
123240640
1082
533610686762864914
252303334385436487
350380415450490540
600600600700700700
280460580790930
1288
143721523234379745746875
1214161820
10
212 /23468
NPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
A N S I C la s s 3 00L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
216241283305403502
516576
100150201
172184196225295325
350400500650600600
22344592
180246
119149255402680
1620
568648762838914991
252303334385436487
356388425466502550
600600700700700760
310512612
101011831353
21702985403064249963
13213
10
Fixed Structure Series
B W R J
B
H1
ΦW
A
H1
W
The ball valve can maintain astable working temperaturerange of -29 C ~ 500 C due tothe co-operation of the seat ring and body.
Flexible graphite is ofhigh-temperature andfire resistant.
exible graphite is of high-t emperature and
re resistance function.
The stem is designed to preventblow-out should the packing become loose during operation.
StemBu shing
Bo dyPa ck ing
Manual operated
Fixed Structure, 150Lb/300Lb
250300350400450500
250300350400450500
506580
100150200
506580
100150200
Note: Worm-gear actuator.
23
1214161820
23468
NPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
A N S I C la s s 6 00L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
292356432559660
5176
100150201
185205235300350
500600600600600
305684
230350
148200460908
2560
787838889991
1092
252303334385436
362398435478522
700700700760760
600830
114015302120
402155679695
1210319031
12141618
10
2346
NPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
A N S I C la s s 9 00L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
368381457610
4974
100150
190208238312
650700600600
4578
120255
296342
12302319
737838965
1029
201252303322
340372420465
600700700760
520810
10501386
53517683
1317818383
101214
8
234
NPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
A N S I C la s s 1 500L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
368470546
4974
100
190210240
650750600
45116170
50710801981
705832991
144192239
315350388
600600700
430630
1188
38149380
144668
10
6
Fixed Structure Series
B W R J
B
H1
ΦW
A
H1
W
StemBu shing
Bo dyPa ck ing
Thrust Be aring
Stem
Bo dy
Bo dySp ring
Se at ring
Se at
Ba ll
Manual operated
Pres sure ring
Fixed Structure, 600Lb/900Lb/1500Lb
250300350400450
200250300350
150200250
5080
100150200
5080
100150
5080
100
Note: Worm-gear actuator.
24
The ball valve can maintain astable working temperaturerange of -29 C ~ 500 C due tothe co-operation of the seat ring and body.
Flexible graphite is ofhigh-temperature and
The stem is designed to preventblow-out should the packing become loose during operation.
VAHN-TECH INTERNATIONAL INC.2906-15 Fort York Blvd; Toronto, ON M5V 3Y4, CANADATel/Fax: +1 416 342 0001Email: [email protected]
VAHN-TECH INTERNATIONAL INC.68 Netley Road, Barking Side,
ILFORD, ESSEX IG 2 7 NP, LondonUnited Kingdom
Tel: +44 208 554 1163/+44 (795) 649 3190Email: [email protected]
!!!"#$%&'()*%"*+,