Flight control and system 100
-
Upload
university-of-gujrat-pakistan -
Category
Engineering
-
view
674 -
download
1
Transcript of Flight control and system 100
Aircraft Control and The System 100 PRESENTED BY:AHSAN ZAFAR 12063122-087NAEEM RAZA 12063122-084
Background
An Airplane contains different avionics systems.
Examples are communications, navigation, radar, collision avoidance, transponder, weather, and weapons systems.
Having different control systems for each avionics system occupies a large space
BackgroundThe Cockpit is very small.
Presence of different control systems make the cockpit crowded
Training is required for each control system
System 100System 100 is a single control system.
Different avionics systems can be controlled using this single device.
Easy to use.
Requires less space.
System 100Less Training is required.
Avionics systems can be from different manufacturer's.
Has a graphical screen i.e. consisting of 7 colors.
Functions
Functions
Power On/OffEnterClearLuminosity Card ReaderUSB Connector
FunctionsLeft Keys
Line Select Keys
Receive selection of a radio by a pilot or other user.
For example, for use or interaction with.
FunctionsRight Keys
Encoder pushbutton is used to ,for example, invoke communication channel selection.
Lower knob is used to adjust radio frequency.
Knob is also used to control the cursor in GUI.
FunctionsLower Keys
These Keys are used to select between different avionics systems.
Different types of avionics system can be controlled.
The functions available for selection are indicated by labels displayed above the soft keys.
Block Diagram
Block DiagramA number of radios can be connected.
Transponder for air radio system.
Tactical Air Navigation System
Global Positioning System
Circuit
WorkingCPU act as the Brain of the Machine.
CPU consists of different devices like microprocessor ,ALU etc.
Buses are used for two-way communication between different parts.
Working
Two Type of memories are used in a System 100.
Non-Volatile memory stores the permanent data like
the device’s operating software.
Volatile memory stores temporary data used during the
functioning of system 100.
WorkingCommunication Interfaces are used to link the device with different avionics systems.
Different type of ports are available for connecting different systems.
Power interface is used to provide voltages to the machine.
It Receives the voltages from power source available in the airplane.