Fli Charge

42
POWER YOUR WORLD. POWER YOUR LIFE.

Transcript of Fli Charge

Page 1: Fli Charge

POWER YOUR WORLD. POWER YOUR LIFE.

Page 2: Fli Charge
Page 3: Fli Charge
Page 4: Fli Charge
Page 5: Fli Charge

fliCharge designs, develops and markets

wire-free conductive powering technologies

and related products. The patented fliCharge

technology is the only interoperable wire-free

power solution that can simultaneously power

multiple devices on the same pad no matter

their power requirement or position on the

pad. 

fliCharge’s conductive technology is the

most efficient wire-free power solution and is

compatible with virtually all battery powered

devices on the market. fliCharge’s products are

easily integrated into your every day life and

are simple to use.

About fliCharge

Page 6: Fli Charge

fliCharge’s conductive wire-free charging

technology was originally developed at

Pure Energy, a green oriented rechargeable

battery company. In late 2013, International

Development Group acquired the wire-free

technology, intellectual property and assets

from Pure Energy.

In early 2014, the technology was relaunched

in fliCharge, a newly formed company focused

solely on wire-free power, with the intention of

commercializing in 2015.

fliCharge is currently commercializing,

partnering or developing in markets including:

automotive, education, office, healthcare,

power tools and vaporizers. In many of these

key verticals, the company has already begun

working in conjunction with one or more key

partners to bring this technology to market.

Our Story

Page 7: Fli Charge
Page 8: Fli Charge

The fliCharge wire-free power system is

comprised of a pad or charging surface and an

electronic device — both of which are enabled

with fliCharge’s patented wire-free technology.

The surface of the pad has conductive contact

strips of specified dimensions and spacing

that provide low voltage DC power while

fliCharge control circuitry constantly monitors

and supplies power to the contact strips, and

immediately removes power if an unapproved

load or short-circuit condition is detected.

The fliCharge-enabled electronic device has

four contact points embedded into one

surface. These contact points (the fliCharge

“constellation”) are designed to make an

immediate and positive electrical connection

with the contact strips on the power transfer

surface — regardless of orientation.

Once an approved fliCharge device is detected

on the surface of the pad, DC power is then

supplied to the surface which provides power

to the fliCharge-enabled device circuitry to

either charge the battery or power the device

directly.

Technology

Page 9: Fli Charge

MOBILE DEVICES AUTO

FURNITURE

CONSUMER PRODUCTS

HOSPITALITY

POWER TOOLS

AUXILIARY POWER

LAPTOPS/TABLETS

Page 10: Fli Charge

In contrast to competing inductive

technologies that some competitors use,

fliCharge’s patented wire-free technology is

easier to use, more convenient, more efficient

and is applicable to a significantly greater set

of devices and consumers.

Some of the key difference between fliCharge’s

conductive wire-free power technology, and

its competitors’ inductive wireless charging

technologies are outlined to the right:

Competitive Advantages

Page 11: Fli Charge
Page 12: Fli Charge

fliCharge’s products include charging/power

pads, charging cases for the most popular

Apple iPhone and Samsung Galaxy models

as well as adapters for all other USB powered

devices.

One of the key advantages of fliCharge’s

conductive wire-free charging technology

is that all of the pads are compatible with

all of the cases and adaptors. Furthermore,

fliCharge’s power pads are capable of

powering devices with cumulative power

requirements in excess of 100-watts.

All of the products in the fliCharge ecosystem

maintain a consistent design language

incorporating sharp edges with rounded

corners, as well as matte finishes with glossy

accents.

Products

Page 13: Fli Charge
Page 14: Fli Charge

THE POWER PADS come in two sleek finishes:

black with black swimlanes and white with

brushed steel swimlanes. The bodies of the

pads have a mate finishes and the swimlanes

extend nearly to the end of the pads. The

power cord has a trendy braided covering

and protrudes from the bottom of the pad

such that it can be stowed away neatly and

concealed completely underneath the pad if so

desired. The charging pad measure x.x” X x.x”

X x.x”.

Products:Pads

Page 15: Fli Charge
Page 16: Fli Charge

THE USB POWERDISC provides a convenient

charging option for hundreds of devices across

many different categories. fliCharge’s contact

module is embedded in the belly of the disc

which sends power to your mobile device via a

USB cable compatible with your mobile device. 

The Auto-Detect feature of the PowerDisc

monitors the USB data specification of the

device and automatically provides the correct

electrical current to ensure each device

charges to its full capacity without harming

the devices battery.

The USB PowerDisc is ideal for a number

of products, including all iPads and tablets,

as well as GoPros, GPS devices, Kindles,

Bluetooth speakers and Apple Watches among

many others.

ProductsUniversal Solutions

Page 17: Fli Charge
Page 18: Fli Charge

The PowerCoin is a low cost, versatile universal

adapter.

The Power Coin is an ideal white label solution

that can easily be branded and given away to

consumers at a retail location or event.

The PowerCoin doubles as an alternative

or “stop-gap” for existing or newly released

smartphones. Simply adhere the power coin

to the back of your mobile device, or pop it

into the back of a generic case.

ProductsUniversal Solutions

Page 19: Fli Charge
Page 20: Fli Charge

The newly designed fliCharge product line

includes cases for the iPhone 6 and 6s as well

as the Samsung Galaxy S6 phones.

Similar designs for the Apple iPhone 6+ and

6s+ as well as the Samsung S6 Edge are

currently in development

The cases have a two-piece design and an

impressively thin profile. The standard model

comes in a matte black finish with glossy black

accents and additional customization/color

options are/will be available to consumers.

The thickness of the cases has been minimized

to enable easy use of the headphone jack and

to increase the comfort of the phone when in

use, or in stow.

The design of the contour under the surface of

the case amplifies the volume of the speaker

so music can be played much louder.

The buttons are true to touch and provide a

nice accent on the side of the cases.

ProductsPhone Cases

Page 21: Fli Charge
Page 22: Fli Charge
Page 23: Fli Charge

LOW COST TO EMBED

Simple technology that has been proven and is

easy to build into existing products.

INCREASED CUSTOMER SATISFACTION

Elegant design translates to portable devices

being charged more frequently — and ready to

go.

COMPETITIVE ADVANTAGE

Stand out from the competition by eliminating

the traditional means of providing power —

while increasing product usability.

INCREASED REVENUE

Enhance your product portfolio with an

innovative method to power devices.

FLEXIBLE DESIGN

Technology is easily embedded into a

multitude of applications — with varying power

requirements.

LOW RISK TO EMBED

Full agency certifications (UL/CE/ FCC) ensure

user safety and product reliability; ROHS and

CEC Efficiency Level IV compliance for low

environmental impact.

Benefits for Partners

Page 24: Fli Charge

MITO CORPORATION is an importer and

distributor of top quality products and

brand name solutions to the automotive RV,

marine, school bus, transit bus and specialty

vehicle OEM and aftermarket industries. MITO

currently has an established footprint in 9,000

dealerships across North America.

In March 2015, fliCharge partnered with MITO

Corporation to distribute fliCharge’s wire-free

conductive charging technology to its vast

domestic and international customer base. In

October 2015, fliCharge and MITO introduced

ReVive, an innovative wire-free conductive

charging system for the automotive and

transportation aftermarkets. The ReVive

system won two Global Media Awards at the

2015 SEMA Show.

The ReVive system can be installed in virtually

any type of vehicle including cars, trucks, RVs,

taxis, emergency vehicles and boats providing

user-friendly and efficient wire-free conductive

charging for smart phones, tablets and many

other battery-operated devices. ReVive’s

industry leading 36 watt 12 volt charging

circuit is more than six times more powerful

than the competing inductive car chargers and

has enough power to charge several devices at

the same time.

Current Partners

Page 25: Fli Charge
Page 26: Fli Charge

Current Partners

BRETFORD designs and manufactures smart

furniture solutions that support evolving

technological needs in both the learning and

work environments. Bretford holds close

to seven decades of expertise dedicated to

the design and manufacture of sustainable

furniture. Each furniture design is built for

quality and mobility so rooms, people and

information can move and still stay connected.

In March 2014, fliCharge signed a partnership

and licensing agreement with Bretford

Manufacturing. Through their partnership

with fliCharge, Bretford is developing wire-

free charging solutions for products such as

conductive flooring, tables, desks, carts, trays

and charging stations.

WORDEN FURNITURE is an industry leader in

designing and manufacturing furniture for use

in educational and public libraries.

In July 2015 Worden introduced inCharge,

an innovative line of conductive furniture

developed by fliCharge and its partners. The

system provides a unique way to couple

conductive power from the wall or floor to

tables, chairs, couches and other furniture.

Furniture can be reconfigured quickly

and easily to create completely different

environments. fliCharge conductive charging

pads are built into the top of tables providing

wire-free power for phones, tablets and other

devices.

Page 27: Fli Charge
Page 28: Fli Charge

Current Partners

HOTEL GRAND UNION

Page 29: Fli Charge
Page 30: Fli Charge
Page 31: Fli Charge

fliCharge’s technology can be applied to

a virtually unlimited range of devices and

applications. As such, our research and

development team has an extensive pipeline

of future products and solutions that will come

to market in the coming years. These products

include:

Charging cases with built in backup batteries

External backup battery with built in

charging surface

Desk cradle with built in charging surface

Rollup charging pad for travel

Power Tools

Future Products and Applications

Page 32: Fli Charge
Page 33: Fli Charge
Page 34: Fli Charge
Page 35: Fli Charge
Page 36: Fli Charge
Page 37: Fli Charge
Page 38: Fli Charge
Page 39: Fli Charge
Page 40: Fli Charge
Page 41: Fli Charge

fliCharge is headquartered in New York City and has additional locations spread throughout

North America in States and Provinces including Arizona, Colorado, Michigan and Ontario.

Telephone: 480-252-3778

Toll-Free: 1-844-4WIREFREE (1-844-494-7337)

Customer Service e-mail: [email protected]

Media e-mail: [email protected]

Licensing, Partnership & Reseller Inquiries: [email protected]

General Inquiries: [email protected]

Contact

fliCharge Headquarters

780 Third Avenue

12th Floor

New York, NY 10017

fliCharge Support & Fulfillment

5590 West Chandler Boulevard

Suite 3

Chandler, AZ 85226

Page 42: Fli Charge