FlexiPower Mini ST 10–200 kW

FlexiPower Mini ST10–200 kW

Est.1968

The FlexiPower Mini ST is designed to provide medium critical power users the highest flexibility and growth opportunity platform available today utilising hot

swappable user technology.

Designed and Published by Thycon.

3

DESIGNED TO PROVIDE LARGE SYSTEM BENEFITS FOR MEDIUM POWER APPLICATIONS

Designed for medium power applications, the FlexiPower Mini ST delivers true modular power protection from 10 to 200 kW (one to ten modules) in a single industry-standard frame. Its flexible design provides a “pay as you grow” model, ideal in situations where requirements change quickly and unpredictably. The FlexiPower Mini ST enables cost reduction through best-in-class efficiency performance, fast and efficient implementation and extremely low overall operating costs.

The modular FlexiPower Mini ST is based on Thycon’s proven Modular Parallel Architecture (MPA). MPA means that each UPS module contains all the hardware and software required for full system operation. They share no common components, and as a result system uptime is maximized.

Space costs money and with a footprint of only 0,42 m2 FlexiPower Mini ST (10 –200 kW) takes up less floor space than alternative UPS solutions. The UPS provides all the benefits of a modular UPS solution with a maximum power density of 472 kW / m2.

FlexiPower Mini highlights

• Capacities from 10 to 200 kW in 10 or 20 kW modular steps

• N + 1 redundancy (up to 10 kW N + 1)

• Up to 96 % efficiency across a wide load range

• Near-unity input power factor at partial and full loads (PF of > 0.99 at 100 % load)

• Low input harmonic distortion (THDi of < 3 %)

• 472 kW / m2 power density• “Six nines” availability

With MPA technology each UPS module has its own independent

• logic control• control panel• rectifier• inverter• battery charger• static bypass

Designed and Published by Thycon. > FlexiPower Mini ST

4

MPA – ALWAYS PROTECTING YOUR CRITICAL APPLICATIONS

The three major concerns of IT facility managers when assessing the life-cycle cost of their power protection infrastructure are availability, flexibility and total cost of ownership (TCO). The FlexiPower Mini ST is based on Thycon’s proven Modular Parallel Architecture (MPA) that has been developed specifically to respond to these concerns.

MPA – maximum availability

Parallel architecture limited only to modular design does not guarantee the highest power protection for critical applications. The success of a parallel modular system depends largely on the design of the parallel architecture and on the level of intelligence of the individual modules. Modular systems based on MPA are free of single points of failure and maximize the system’s mean time between failure (MTBF). Quick and simple repair by safe-swapping modules while the UPS is online minimize the system’s mean time to repair (MTTR).

Thycon’s modular FlexiPower Mini ST is built of self-contained modules that include the entire UPS hardware and software; hence, it eliminates all the common parts which are potential single points of failure.

An MPA module includes distributed CPUs, distributed control panels, distributed power units and distributed static bypass switches. Even the batteries are separately configured for each module, which makes the parallel system fully and truly redundant.

MPA – high level of flexibility

UPS systems based on MPA allow for incremental expansions whilst ensuring redundancy at all times. It is possible to start with just a few modules and add to them as required in an easy and safe way. True safe-swap and safe-scale modularity enables the safe replacement of UPS modules and their integration into the UPS system without the need to transfer the critical load onto raw mains or to remove power from the critical load.

MPA – lowest total cost of ownership

Saving costs and optimizing capital deployment are top priorities, and IT facility managers must make effective investments to increase the efficiency of their IT systems. An infrastructure that uses cost-effective and flexible modular power protection solutions with significantly lower operating costs will create competitive advantages in the medium term. The FlexiPower Mini ST boasts the lowest cost of ownership of any UPS system by offering energy efficiency, scalable flexibility and highest availability due to true redundancy and easy serviceability.

MAINS

CHARGE

rectifier inverter static bypass

logic control control panel





5Designed and Published by Thycon. > FlexiPower Mini ST

General Data ST 40 ST 60 ST 80 ST 120 ST 200Number of UPS modules 2 3 4 6 10

Maximum number of inbuilt batteries

80 240 – – –

Maximum output power 40 kW 60 kW 80 kW 120 kW 200 kW

Output power factor 1.0

Topology True online double conversion

Parallel configuration Up to ten modules

UPS type MPA (Modular Parallel Architecture)

Cable entry Front access

InputNominal input voltage 3 × 380 / 220 V + N, 3 × 400 / 230 V + N, 3 × 415 / 240 V + N

Voltage tolerance (Ref. to 3 × 400 / 230 V)

For loads <100 % (–20 %, +15 %), < 80 % (–26 %, +15 %), < 60 % (–35 %, +15 %)

Input distortion THDi ≤ 3 % at 100 %

Frequency 35–70 Hz

Power factor 0.99 at 100 % load

OutputRated output voltage 3 × 380 / 220 V + N, 3 × 400 / 230 V + N, 3 × 415 / 240 V + N

Voltage distortion (Ref. to 3 × 400 / 230 V)

< 1.5 %

Frequency 50 or 60 Hz

Overload capability 10 min.: up to 125 % or 1 min.: up to 150 %

Unbalanced load 100 % possible

Crest factor 3 : 1

EfficiencyOverall efficiency Up to 96 %

In eco-mode configuration 98 %

EnvironmentStorage temperature –25–70 °C

Operating temperature 0–40 °C

Altitude configuration 1000 m without derating

CommunicationsLCD display Yes (per module)

LEDs LED for notification and alarm

Communication ports USB, RS-232, SNMP slot, potential-free contacts

StandardsSafety IEC / EN 62040-1

Electromagnetic compatibility (EMC)

IEC / EN 62040-2

Performance IEC / EN 62040-3

Product certification CE

Manufacturing ISO 9001:2008, ISO 14001:2004

Weight, DimensionsWeight (with modules / without batteries) Up to 135 kg Up to 238 kg Up to 168 kg Up to 262 kg Up to 389 kg

Dimensions W × H × D (mm) 550 × 1135 × 770 550 × 1975 × 770 550 × 1135 × 770 550 × 1975 × 770 550 × 1975 × 770

Specifications are subject to change without notice.

6

High power – low weight!

20 kW = 21.5 kg

MODULES M 10 or M 20Maximum output power 10 or 20 kW

Weight 18.6 or 21.5 kg

Dimensions W × H × D (mm) 488 × 132 × 540 (3 HU)

Product types ST 40 ST 60 ST 80 ST 120 ST 200Maximum output power 40 kW 60 kW 80 kW 120 kW 200 kW

No. of internal batteries (7 / 9 Ah) Up to 80 Up to 240 – – –

Dimensions W × H × D (mm) 550 × 1135 × 770 550 × 1975 × 770 550 × 1135 × 770 550 × 1975 × 770 550 × 1975 × 770

Weight frame (without modules / without batteries)

92 kg 173 kg 82 kg 133 kg 174 kg

FLEXIPOWER MINI ST – SYSTEM ARCHITECTURE

The FlexiPower Mini ST can be deployed in a variety of system architectures to support the specific requirements of your IT infrastructure. The ST 40 and ST 60 cabinet types are suitable for applications with low run-times, limited space and no extension requirements. For larger autonomies and incremental future growth, the ST 80, ST 120 and ST 200 are the best choices

FlexiPower Mini ST – safe-swap modularity

The ability to safe-swap modules significantly reduces the system’s mean time to repair (MTTR) and simplifies system upgrades. Thanks to the unique, compact design and low weight (10 kW =

18.6 kg, 20 kW = 21.5 kg) of the FlexiPower Mini modules, inserting additional modules or replacing existing ones during operation is easy and can be performed by a single technician.

7

Notes

THYCON INDUSTRIAL PTY LTD20 Audrey Ave Coburg3058 VIC AustraliaPH 61 3 9319 9000FAX 61 3 9319 9001ABN 17 068 011 [email protected]

24 HR Service Australia 1800 670 700

FlexiPower Mini RI10–80 kW

Est.1968

Modular three-phase UPS system

The modular UPS for customized solutions.

Designed and Published by Thycon.

3

FLEXIPOWER MINI RI – ALWAYS PROTECTING YOUR CRITICAL LOAD

The rack-independent FlexiPower Mini RI (rack-independent) is one of the most customizable UPS systems on the market and provides the best technical and commercial solutions to meet individual power protection needs. The three-phase and modular UPS system can be integrated into any 19” cabinet, regardless of the rack’s manufacturer.

The multi-purpose FlexiPower Mini RI simplifies the engineering and deployment of customized power protection solutions. The UPS system allows system integrators to add their own knowhow and to implement individual solutions according to their design requirements.

FlexiPower Mini RI can be integrated into any weather-resistant enclosure to withstand the demands of the harsh outdoor environments. The rack-independence allows FlexiPower Mini RI to be used all over the world on oil rigs, ferries and commercial shipping vessels, just to name a few.

In the rack, the warm air is discharged to the back. This allows the warm air to exit the cabinet through the top air path without heating up the whole enclosure. In any case, it is important that system integrators take the air conditioning into account.

FlexiPower Mini RI – always protecting your critical load

The three major concerns of IT managers when assessing the life-cycle cost of their power protection infrastructure are availability, flexibility and total cost of ownership (TCO). FlexiPower Mini RI simultaneously addresses all three concerns. FlexiPower Mini RI is based on Thycon’s Modular Parallel Architecture (MPA) that has been developed specifically to respond to stringent life-cycle cost requirements.

Maximum availability

Modular systems based on MPA are free of single points of failure. The modular FlexiPower Mini RI is built of self-contained modules that include the entire UPS hardware and software; hence, it eliminates all the common parts

that are potential single points of failure.

High level of flexibility

UPS systems based on MPA allow for incremental expansions whilst ensuring redundancy at all times. It is possible to start with just a few modules and add to them as required in an easy and safe way.

Low total cost of ownership

FlexiPower Mini RI boasts the lowest cost of ownership of any UPS system by offering energy efficiency, scalable flexibility and highest availability due to true redundancy and easy serviceability.

Designed and Published by Thycon. > FlexiPower Mini RI

FlexiPower Mini RI 20



4

AC–AC efficiency

100

95

90

85

80

75

25% 50% 75% 100% charge

Linear Load (cos phi = 1)

The input power factor of FlexiPower Mini RI is near unity at partial and full load.

Class-leading THDi of < 3 % virtually eliminates harmonic distortion of the mains supply.

The flat efficiency curve enables significant energy savings in every working condition.

1.0

0.8

25% 50% 75% 100% charge

6

5

4

3

2

1

025% 50% 75% 100% charge

Input power factor versus load

Input current total harmonic distortion (THDi)

5Designed and Published by Thycon. > FlexiPower Mini RI

General Data ST 10 ST 11 ST 12 ST 20 ST 22 ST 24 ST 40Number of UPS modules 1 1 1 2 2 2 4

Maximum number of inbuilt batteries

– 40 80 – 80 160 –

Maximum output power 20 kW 20 kW 20 kW 40 kW 40 kW 40 kW 80 kW

Output power factor 1.0

Topology True online double conversion

UPS type Modular (Modular Parallel Architecture)

Cable entry Rear access

InputNominal input voltage 3 × 380 / 220 V + N, 3 × 400 / 230 V + N, 3 × 415 / 240 V + N

Voltage tolerance (Ref. to 3 × 400 / 230 V)

For loads <100 % (–20 %, +15 %), < 80 % (–26 %, +15 %), < 60 % (–35 %, +15 %)

Input distortion THDi ≤ 3 % at 100 %

Frequency 35–70 Hz

Power factor 0.99 at 100 % load

OutputRated output voltage 3 × 380 / 220 V + N, 3 × 400 / 230 V + N, 3 × 415 / 240 V + N

Voltage distortion (Ref. to 3 × 400 / 230 V)

< 1.5 %

Frequency 50 or 60 Hz

Overload capability 10 min.: 125 % or 1 min.: 150 %

Unbalanced load 100 % possible

Crest factor 3 : 1

EfficiencyOverall efficiency Up to 96 %

In eco-mode configuration 98 %

EnvironmentStorage temperature –25–70 °C

Operating temperature 0–40 °C

Altitude configuration 1000 m without derating

CommunicationsLCD display Yes (per module)

LEDs LED for notification and alarm

Communication ports USB, RS-232, SNMP slot, potential-free contacts

StandardsSafety IEC / EN 62040-1

Electromagnetic compatibility (EMC)

IEC / EN 62040-2

Performance IEC / EN 62040-3

Product certification CE

Manufacturing ISO 9001:2008, ISO 14001:2004

Weight, DimensionsWeight (with modules / without batteries) Up to 39 kg Up to 62 kg Up to 78 kg Up to 68 kg Up to 109 kg Up to 136 kg Up to 136 kg


488 × 487 × 735 (11 HU)

488 × 665 × 735 (15 HU)

488 × 440 × 565 (10 HU)

488 × 798 × 735 (18 HU)

488 × 1153 × 735 (26 HU)

488 × 798 × 735 (18 HU)

Specifications are subject to change without notice.

6

MODULES M 10 or M 20Maximum output power 10 or 20 kW

Weight 18.6 or 21.5 kg


Product types RI 11 RI 12 RI 22 RI 24 RI 10 RI 20 RI 40Maximum output power 20 kW 20 kW 40 kW 40 kW 20 kW 40 kW 80 kW

No. of internal batteries 40 80 80 160 – – –


488 × 665 × 735 (15 HU)

488 × 798 × 735 (18 HU)

488 × 1153 × 735 (26 HU)

488 × 310 × 565 (7 HU)

488 × 440 × 565 (10 HU)

488 × 798 × 735 (18 HU)

Weight sub-rack (without modules / without batteries)

40 kg 56 kg 66 kg 93 kg 20 kg 25 kg 50 kg

FLEXIPOWER MINI RI – SYSTEM ARCHITECTURE

The core elements consist of best-in-class hardware and software that respond to diverse customer applications and changing business needs. All FlexiPower Mini RI components can be mounted directly in any 482.6 mm (19”) cabinet of 800 or 600 mm (RI 10, RI 20) depth. Depending on the requirements, mixed equipment population is

also possible. FlexiPower Mini RI is available in seven configurations – with or without inbuilt battery blocks.

Highlights for system integrators

• Rack-independence

• Efficient manufacture of individual solutions with standard products

• High local added value

FlexiPower Mini RI – safe-swap modularity

The ability to safe-swap modules significantly reduces the system’s mean time to repair (MTTR) and simplifies system upgrades. Thanks to the unique, compact design and low weight (10 kW = 18.6 kg, 20 kW = 21.5 kg) of the FlexiPower Mini RI modules, inserting additional modules or replacing existing ones during operation is easy and can be performed by a single technician.

7

Notes

THYCON INDUSTRIAL PTY LTD20 Audrey Ave Coburg3058 VIC AustraliaPH 61 3 9319 9000FAX 61 3 9319 9001ABN 17 068 011 [email protected]

24 HR Service Australia 1800 670 700

FlexiPower Mini ST 10–200 kW

Documents

Transcript of FlexiPower Mini ST 10–200 kW