Flexible Tubing Kit for Flowlight - altEStore.com Solar Solutio ns, Inc Main (866) 856-9819 Flexible...
1
Innovative Solar Solutions, Main (866) 856-98 Flexible Tubin This flexible tubing kit m easy. The safety scree can Remove Foa Mount the pump facing downward (optional acces Cut the tubing into 2 may cause block If bubbles are trapp filter to horizonta , Inc \ 1730 Camino Carlos Rey, Unit 101/ Santa Fe, N 819 \ Fax (704) 973-0666 / www.innovativesolar.com ng Kit for Flowlight® Booster P makes pump installation and future se en prevents accidental introduction of n instantly damage the pump. am Packing Plugs from Pump Head Pump Position either horizontally or vertically (red pump fa d). Allow access to reach the “Dry Run Switc ssory) which may be clamped to pump face. Tubing Installation 2 convenient lengths. Do not bend sharply w ckage, particularly under suction (intake side Inline Filter Installation ped in the filter (causing pump noise), rotate al position. Do not turn the filter upside-down 2010 NM 87505 m Pump ervice very debris that d! ace ch” . which e). e the wn.
Transcript of Flexible Tubing Kit for Flowlight - altEStore.com Solar Solutio ns, Inc Main (866) 856-9819 Flexible...
Innovative Solar Solutions, Inc
Main (866) 856-9819
Flexible Tubing Kit for Flowlight® Booster Pump
This flexible tubing kit makes pump installation and future service veryeasy. The safety screen prevents accidental introduction of debris
can instantly damage the pump.
Remove Foam Packing Plugs from Pump Head!
Mount the pump either horizontally or vertically (red pump facefacing downward). Allow access to reach the “Dry Run Switch”
(optional accessory) which may be cla
Cut the tubing into 2 convenient lengths. Do not bend sharply whichmay cause blockage, particularly under suction (intake side).
If bubbles are trapped in the filter (causing pump noise),filter to horizontal position. Do not turn the filter upside
ns, Inc \ 1730 Camino Carlos Rey, Unit 101/ Santa Fe, NM 87505
9819 \ Fax (704) 973-0666 / www.innovativesolar.com
Flexible Tubing Kit for Flowlight® Booster Pump
This flexible tubing kit makes pump installation and future service veryeasy. The safety screen prevents accidental introduction of debris
can instantly damage the pump.
Remove Foam Packing Plugs from Pump Head!Pump Position
Mount the pump either horizontally or vertically (red pump facefacing downward). Allow access to reach the “Dry Run Switch”
(optional accessory) which may be clamped to pump face.
Tubing Installation
Cut the tubing into 2 convenient lengths. Do not bend sharply whichmay cause blockage, particularly under suction (intake side).
Inline Filter Installation
If bubbles are trapped in the filter (causing pump noise), rotate thefilter to horizontal position. Do not turn the filter upside-down.
2010
, Unit 101/ Santa Fe, NM 87505
/ www.innovativesolar.com
Flexible Tubing Kit for Flowlight® Booster Pump
This flexible tubing kit makes pump installation and future service very easy. The safety screen prevents accidental introduction of debris that
Remove Foam Packing Plugs from Pump Head!
Mount the pump either horizontally or vertically (red pump face facing downward). Allow access to reach the “Dry Run Switch”
mped to pump face.
Cut the tubing into 2 convenient lengths. Do not bend sharply which may cause blockage, particularly under suction (intake side).
rotate the down.
