Flexible ducting system FlexPipe Round 75 mm Øin ... · Flexible ducting system FlexPipe®plus...
6
128 Flexible ducting system FlexPipe ® plus Round 75 mm Ø in combination with Oval 51 x 114 mm FlexPipe ®plus round and oval ducting system. Arbitrarily combinable. FlexPipe ®plus is the further devel- opment of the successful air distribution system FlexPipe ® and unites round and oval pipe as of now in a clever system package with all conceivable round-oval combinations. The new oval pipe has the identical hydraulic cross-section and pres- sure loss like the round pipe as well as a point-symmetric design. This leads to unique advantages: – No matter if it’s planning and lay- out or installation and adjustment or maintenance, round and oval pipe behave completely identical. – Depending on the structural condition, therefore any changes between round and oval pipe by means of adapters are possible. This along the line as well as from the distribution box away. This offers greatest possible freedom during planning and installation. – The ideal, cost-effective option can be selected at any time. The space-saving oval pipe is mainly used when low structure heights are required. – The round-oval-compatibility leads to a low parts variety. Stockpiling and consultation are strongly simplified. The installa- tion is almost intuitively carried out. – The point-symmetric oval design allows the laying from the hori- zontal line into vertical without the use of adapter pieces to the position correction. ■ Note FlexPipe ducting system with outer-Ø: 63 mm, inner: 52 mm for air flow volume up to 20 m³/h see page 132 FlexPipe ® plus round pipe in the concrete ceiling FlexPipe ® plus oval pipe on the unfinished floor FlexPipe ® plus allows any round-oval-combination ■ FlexPipe ® plus contains two de- sign types which are arbitrari- ly combinable: ■ FRS 75, round: Outer-Ø: 75 mm, inner: 63 mm for air flow vol. up to 30 m³/h. For laying into concrete. High resilience (STIS ≥ 10 kN/m² to DIN EN 9969). Bending radius horizontal and vertical 150 mm. ■ FRS 51, oval: 51 x 114 mm, for air flow vol- ume up to 30 m³/h, ideal for space-saving laying e.g. on the unfinished floor or in the wall. Bending radius horizontal 300 mm, vertical 200 mm. ■ Laying, handling, initiation ■ Easiest planning thanks to iden- tical pipe cross-sections and pressure losses. ■ Fast to install through star shaped laying. ■ Convenient handling due to the light weight. ■ Fast initiation as the adjustments are reduced to a minimum. ■ Constant air distribution. ■ Easy to clean, hygienically perfect. ■ Duct characteristics and advantages ■ The round and oval pipe con- sists of quality-assured PE-HD made of new raw material. ■ The outside is ribbed where as the inner surface is absolutely smooth and antistaticly coated. This minimizes the pressure losses and prevents flow-gener- ated noise and dirt disposits. ■ The extreme horizontal and verti- cal bending elasticity of both pipe geometries reduces the number of required fittings to a minimum. ■ Due to the point-symmetric de- sign the laying of the oval pipe is vertically up- or downwards from the horizontal line possible- without adapter pieces. ■ Laying-conception/installation ■ Fixing brackets on all parts for secure fixing to floor, wall, or ceiling. ■ Unlockable fixing clips guarantee the fast and no-pull-out pipe mounting on all joints. ■ By sound absorbing distribution boxes additional cross-talk sound attenuators are omitted. ■ Precise sealing system on all fit- tings for leakage-free air trans- portation. ■ Many different components ensure the perfect solution for nearly every request. There are ceiling outlets available for all kind of valves with ND 125 as well as wall and floor outlets, delivered with grilles as stan- dard. They each have two paral- lel pipe connections for the low pressure loss airflow of the re- quired air flow volumes to DIN 1946-6.
Transcript of Flexible ducting system FlexPipe Round 75 mm Øin ... · Flexible ducting system FlexPipe®plus...
128
Flexible ducting system FlexPipe®plus
Round 75 mm Ø in combination with Oval 51 x 114 mm
FlexPipe®plus round and oval ducting system. Arbitrarily combinable. FlexPipe®plus is the further devel-opment of the successful airdistribution system FlexPipe®and unites round and oval pipeas of now in a clever systempackage with all conceivableround-oval combinations.
The new oval pipe has the identicalhydraulic cross-section and pres-sure loss like the round pipe aswell as a point-symmetric design.This leads to unique advantages:– No matter if it’s planning and lay-
out or installation and adjustmentor maintenance, round and ovalpipe behave completely identical.
– Depending on the structuralcondition, therefore any changesbetween round and oval pipe bymeans of adapters are possible.This along the line as well asfrom the distribution box away.This offers greatest possiblefreedom during planning and
installation.– The ideal, cost-effective option
can be selected at any time. Thespace-saving oval pipe is mainlyused when low structure heightsare required.
– The round-oval-compatibilityleads to a low parts variety.Stockpiling and consultation arestrongly simplified. The installa-tion is almost intuitively carriedout.
– The point-symmetric oval designallows the laying from the hori-zontal line into vertical withoutthe use of adapter pieces to theposition correction.
� NoteFlexPipe ducting system withouter-Ø: 63 mm, inner: 52 mmfor air flow volume up to 20 m³/h
see page 132
FlexPipe®plus round pipe in the concrete ceiling
FlexPipe®plus oval pipe on the unfinished floor
FlexPipe®plus allows any round-oval-combination
� FlexPipe®plus contains two de-sign types which are arbitrari-ly combinable:
� FRS 75, round:Outer-Ø: 75 mm, inner: 63 mmfor air flow vol. up to 30 m³/h.For laying into concrete. Highresilience (STIS ≥ 10 kN/m² toDIN EN 9969). Bending radiushorizontal and vertical 150 mm.
� FRS 51, oval:51 x 114 mm, for air flow vol-ume up to 30 m³/h, ideal forspace-saving laying e.g. on theunfinished floor or in the wall.Bending radius horizontal 300mm, vertical 200 mm.
� Laying, handling, initiation� Easiest planning thanks to iden-
tical pipe cross-sections andpressure losses.
� Fast to install through starshaped laying.
� Convenient handling due to thelight weight.
� Fast initiation as the adjustmentsare reduced to a minimum.
� Constant air distribution.� Easy to clean, hygienically
perfect.
� Duct characteristics andadvantages
� The round and oval pipe con-sists of quality-assured PE-HDmade of new raw material.
� The outside is ribbed where asthe inner surface is absolutelysmooth and antistaticly coated.This minimizes the pressurelosses and prevents flow-gener-ated noise and dirt disposits.
� The extreme horizontal and verti-cal bending elasticity of bothpipe geometries reduces thenumber of required fittings to aminimum.
� Due to the point-symmetric de-sign the laying of the oval pipe isvertically up- or downwardsfrom the horizontal line possible-without adapter pieces.
� Laying-conception/installation� Fixing brackets on all parts for
secure fixing to floor, wall, orceiling.
� Unlockable fixing clips guaranteethe fast and no-pull-out pipemounting on all joints.
� By sound absorbing distributionboxes additional cross-talksound attenuators are omitted.
� Precise sealing system on all fit-tings for leakage-free air trans-portation.
� Many different componentsensure the perfect solution fornearly every request. There areceiling outlets available for allkind of valves with ND 125 aswell as wall and floor outlets,delivered with grilles as stan-dard. They each have two paral-lel pipe connections for the lowpressure loss airflow of the re-quired air flow volumes to DIN1946-6.
129
KWL®
with
heat
reco
very
Flexible ducting system FlexPipe®plus
Round 75 mm Ø in combination with Oval 51 x 114 mm
117
78
165
54
75
114 51
FlexPipe® duct round FlexPipe® duct oval FlexPipe®duct (bundle = 50 running mtrs)
Type Ref. Dim. in mmØ 75 mm no. Outer-Ø Inner-Ø
FRS-R 75 2913 75 63
Hygiene-duct cap SU
FRS-VD 75 2915 10 pcs.Flexible round pipe from PE-HD, ideal for thelaying into the concrete ceiling. Incl. two hygiene-duct caps, in addition can be ordered separately.
FlexPipe®duct oval (bund = 20 run m)
Type Ref. Dim. in mm114 x 51 mm no. Width Height
FRS-R 51 3850 114 51
Hygiene-duct cap SU
FRS-VD 51 3866 10 pcs.Flexible oval pipe from PE-HD, for space-savinglaying on the unfinished floor, installation in thewall or false ceiling. Incl. two hygiene-duct caps,in addition can be ordered separately.
117
5478
Cap, seal ring, clip Cap, seal ring, clip Cap, seal ring, clip
Type Ref. SUØ 75 mm no.
Spigot cap with sealing
FRS-VDS 75 3855 1 pc.
Seal ring
FRS-DR 75 2916 10 pcs.
Clip, unlockable
FRS-FK 3854 10 pcs.
Cap, seal ring, clip
Type Ref. SU114 x 51 mm no.
Spigot cap with sealing
FRS-VDS 51 3856 1 pcs.
Seal ring
FRS-DR 51 3864 10 pcs.
Clip, unlockable
FRS-FK 3854 10 pcs.
16
38
16
38
130 78
Connection sleeve
Type Ref.Ø 75 mm no.
FRS-VM 75 2914Connection sleeve for round pipe FRS-R 75 withinterlocking protection on both sides, frompolyethylene.
Connection sleeve
117 122
54
Connection sleeve
Type Ref.114 x 51 mm no.
FRS-VM 51 3862Connection sleeve for oval pipe FRS-R 51, withintegrated fixing brackets, incl. pipe fixing clips(4 pcs). Made from impact-resistant polypropy-lene.
Connection sleeve
78
~165
Short elbow 90° Short elbow 90°
Type Ref.Ø 75 mm no.
FRS-B 75 2994Elbow 90° for bend radius < 2 x duct outer diam-eter. Horizontal and vertical use with interlockingprotection on both sides. Made from galvanisedsheet steel.
117
188
54
Elbow horizontal / vertical
Type Ref.114 x 51 mm no.
FRS-BH 51 3863
FRS-BV 51 3859Horizontal or vertical elbow 90°. With integratedfixing brackets, incl. pipe fixing clips (4 pcs).Made from impact-resistant polypropylene.
Elbow horizontal / vertical
117
60
120
120
54
Adaptor straight / vertical Adaptor straight / vertical
Type Ref.Ø 75 mm / 114 x 51 mm no.
Adaptor straight
FRS-ÜG 51-75 3861
Adaptor vertical
FRS-ÜV 51-75 3860Horizontal and vertical adapter from round pipeFRS-R 75 to oval pipe FRS-R 51. With integratedfixing brackets, incl. pipe fixing clips (4 pcs).Made from impact-resistant polypropylene.
117
78
60
118
148
54
� Any combination of round and oval pipe
� With FlexPipe® plus from Helios you decide for one system andhave – depending on the object requirement – the perfect solutionin the access.
� The only 51 mm super flat oval pipe is then used, when low con-struction height is required. The approved round pipe is offered forthe direct laying into the concrete ceiling.
� Thanks to identical hydraulic cross-sections and pressure losses ofthe two pipes and due to well-conceived system components youcan combine round and oval as required.This along the line as wellas from the distribution box away.
63
105
42
Vertical and horizontal adaptersallow each round/oval, oval/ovaland round/round combination.
The distribution boxes can beequipped with round and ovalsingle spigots as well as com-bined.
130
Flexible ducting system FlexPipe®plus
Round 75 mm Ø in combination with Oval 51 x 114 mm
Grille with elbow box Grille with elbow box, 90°
Type Ref.Ø 75 mm no.
FRS-WBS 2-75 9996Grille with elbow box consisting of:– elbow box with sliding type fitting – grille white (FK-WA 200 W), 250 x 103 mm– 1 pc. cap
Wall mounting kit for valve connection
Type Ref. Ø DØ 75 mm no. mm
FRS-WDV 2-75/100 9621 100
FRS-WDV 2-75/125 9622 125Wall mounting kit including plaster cover plateand cap (1 pc). For connection of supply or ex-tract air valves nom. dia. 100 or 125.
Basic site package
Type Ref. Ø Dno. mm
FRS-RP 75 9397 75FlexPipe® duct system basic site package:– 3 pcs. FRS-R 75 (Ref. no. 2913)– 2 pcs. FRS-VK 10-75/160 (Ref. no. 3847) – 8 pcs. FRS-DWK 2-75/125 (Ref. no. 3857)– 7 pcs. FRS-B 75 (Ref. no. 2994)– 7 pcs. FRS-VM 75 (Ref. no. 2914)– 4 SU FRS-DR 75 (Ref. no. 2916)– 1 SU FRS-VD 75 (Ref. no. 2915)– 1 pc. Cold shrinking strip KSB (Ref. no. 9343)
Choosing the Helios basic site package, saves– money as you will benefit from the package
price.– time because everything you need is already
included. That way you can start right away.
Basic site package
Floor outlet set
Type Ref.Ø 75 mm no.
FRS-BKGS 2-75 9992Floor outlet with grille consisting of:– 1 pc. floor outlet for grille nom. dia. 160– 1 pc. floor grille from high-quality steel withadjustable air flow.
– 1 pc. cap
Grille with box, straight
Type Ref.Ø 75 mm no.
FRS-WDS 2-75 9994Grille with box consisting of:– outlet box with sliding type fitting – grille white (FK-WA 200 W), 250 x 103 mm– 1 pc. cap
Floor outlet set
Flooroutlet
Floor grille
Grille with box
Wall mounting kit
* FRS-WDV 2-75/100
Multi-floor outlet
Type Ref.114 x 51 mm no.
FRS-WBK 2-51 3877Multi-floor outlet to connect max. 2 oval pipesFRS-R 51. Suitable for casting in concrete ceil-ing, consisting of:– Polymer outlet from impact-resistant
polypropylene with air volume regulation. Foruse with FRS-WGS or FRS-BGS. 1 pc. spigotcover with seal (oval).
1) Cap with integrated sealing FRS-VDS 75, Ref.-No. 3855 and -VD 125, Ref.-No. 3865.Cap can be used for single sigot- respectively pipe connection opening at the distribution box.
2) Cap with integrated sealing FRS-VDS 51, Ref.-No. 3856 and -VD 125, Ref.-No. 3865.Cap can be used also for single sigot- respectively pipe connection opening at the distribution box.
78
~30 114
300
335
115
51
143 80
Außenmaß
Außenmaß
Floor grille kit
Type Ref. no.
FRS-BGS 1 3878Floor grille kit from high-quality steel for multi-floor outlet FRS-MBK 2-75,and wall/floor outletFRS-WBK 2-51, consisting of:– Grille frame with height adjustment for thresh-old-free installation in flooring
– Penetration-proof design floor grille– Insert filter (spare filter mat ELF-BGS,Ref. no. 3914, SU = 2 pcs.)
78
88
125
240
105
Ceiling-/wall outlet
Type Ø 75 mm Ref. no.
FRS-DWK 2-75/125 3857
Extension for ceilings > 240 mm
FRS-VV 125 3906Ceiling-/wall outlet to connect max. 2 round pipesFRS-R 75. For intake and extract valves DN 125.Integrated bench marks for precise shortening. In-cl. spigot cap with seal ring1) 75 mm and DN 125(each 1 pc). With integrated fixing brackets, incl.pipe fixing clips (4 pcs). From impact-resistantpolypropylene.
Ceiling-/wall outlet 117
60
125
143
240
54
Ceiling-/wall outlet
Type 114 x 51 mm Ref. no.
FRS-DWK 2-51/125 3858
Extension for ceilings > 240 mm
FRS-VV 125 3906Ceiling-/wall outlet to connect max. 2 oval pipesFRS-R 51. For intake and extract valves nom. dia.125. Integrated bench marks for precise shorten-ing. Incl. spigot cap with seal ring1) 75 mm andDN 125 (each 1 pc). With integrated fixing brack-ets, incl. pipe fixing clips (4 pcs). From impact-resistant polypropylene.
Ceiling-/wall outlet
FRS-VDS 751)
FRS-VD 1251)
FRS-VDS 512)
FRS-VD 1252)Core holeØ 140 mm
Core holeØ 140 mm
100 300
177 377
117
120
121
220
319
143
Außenmaß
Außenmaß
54
95
342 143
4
Multi-floor outlet
Type Ref.Ø 75 mm no.
FRS-MBK 2-75 3872Multi-floor outlet to connect max. 2 round pipesFRS-R 75. Suitable for casting in concrete ceil-ing, consisting of:– Floor outlet for grille in robust sheet-metaldesign
– 2 pcs. single spigots (round) and 1 pc. spigotcap with sealing (round)
Multi-floor outlet
Wall grille set
Type Ref. no.
FRS-WGS 1 3881 white
FRS-WGS 2 3882 white
FRS-WGS 3 3883 white
FRS-WGS 1 E 3886 stainless st.
FRS-WGS 2 E 3892 stainless st.
FRS-WGS 3 E 3904 stainless st.Wall grille set with installation frame and insert fil-ter for FRS-WBK 2-51. Grille designs see p. 125.
Multi-floor outlet
Floor grille kit Wall grille set
* Design1: FRS-WGS 1 / 1 E
Design2: 2 / 2 E
Design3: 3 / 3 E
*
Outer dimension
Outer dimensio
n
Outer dimension
Outer dimensio
n
131
Flexible ducting system FlexPipe®plus
Round 75 mm Ø in combination with Oval 51 x 114 mm
KWL®
with
heat
reco
very
125
125 470
530
160
54
117 143
355 500
78
100
125
70 2
06
99
99
500 530
160
125
58
85
Distribution box 6-75, flat-design1)
Type Ref. Ø NW Ø 75 mm no. mm
FRS-FVK 6-75/125 3845 125To connect up to 6 flexible pipes FRS-R 75.Mounting as straight-through distributor.Combined installation with oval single spigotspossible (FRS-ES 51, Ref.-No. 3851, see below).With sound absorbing lining and large inspectionopening.
Compact distribution box
Flat distribution box 6-fold
Compact distribution box1)
Type Ref. Ø NW Ø 75 mm no. mm
FRS-KVK 6-75/125 L* 3873 125
FRS-KVK 6-75/125 R* 3874 125* Supply air connection optionally on the left orright. Compact distribution box, perfect next toadjacent exhaust air rooms. 2 x DN 100 for ex-traction with extract air valves DLV (see acces-sories). Supply air distribution via connection ofup to 6 flexible ducts FRS-R 75.
470
160
530
125
125
143
78
Multi-distribution box1)
Type Ref. Ø NW Ø 75 mm no. mm
FRS-MVK 4+1-75/125 3843 125For universal installation in/on the concrete ceil-ing. With height-adjustable mounting brackets.Pipe connection nom. dia. 125 is horizontally orvertically possible as an option. 10 connectionsfor up to 5 flexible pipes FRS-R 75. With soundabsorbing lining and large inspection opening.
Multi-distribution box 4+1 Multi-distribution box1)
Type Ref. Ø NW 114 x 51 mm No. mm
FRS-MVK 4+1-51/125 3841 125For universal installation on the concrete ceiling.With height-adjustable mounting brackets. Pipeconnection nom. dia. 125 is horizontally or verti-cally possible as an option. 10 connections forup to 5 flexible pipes FRS-R 51. With sound ab-sorbing lining and large inspection opening.
Multi-distribution box 4+1
673
310
200
160
78
143
Multi distribution box1)
Type Ref. Ø NW Ø 75 mm no. mm
FRS-MVK 5+2-75/160 3836 160For universal installation in/on raw concrete ceil-ing. With height-adjustable mounting brackets.Pipe connections DN 160 horizontal or verticalare optional. 12 connection options for up to 7ventilation ducts FRS-R 75. With sound-absorb-ing lining and large inspection opening.
Multi distribution box 5+2-fold
Distribution box 15-75 2)
Type Ref. Ø NW Ø 75 mm no. mm
FRS-VK 15-75/180 3848 18030 connection possibilities for up to 15 flexiblepipes FRS-R 75. Optional mounting as straight-through-, 90°-distributor or combined. Combinedinstallation with oval single spigots possible(FRS-ES 51, Ref.-No. 3851, see below).With sound absorbing lining and large inspectionopening.
310
673
200
160
117
54
143
Multi distribution box1)
Type Ref. Ø NW 114 x 51 mm no. mm
FRS-MVK 5+2-51/160 3838 160For universal installation in/on raw concrete ceil-ing or as a floor distributor. With height-ad-justable mounting brackets. Pipe connections DN160 horizontal or vertical are optional. 12 con-nection options for up to 7 oval ventilation ductsFRS-R 51. With sound-absorbing lining andlarge inspection opening.
Multi distribution box 5+2-fold
500 500
200
160 78
99
99
Distribution box 10-75 2)
Type Ref. Ø NW Ø 75 mm no. mm
FRS-VK 10-75/160 3847 16020 connection possibilities for up to 10 flexiblepipes FRS-R 75. Optional mounting as straight-through-, 90°-distributor or combined.Combined installation with oval single spigotspossible (FRS-ES 51, Ref.-No. 3851, see below).With sound absorbing lining and large inspectionopening.
Distribution box 10-fold
200
500
500
160
117 54
99
198
Distribution box 10-512)
Type Ref. Ø NW 114 x 51 mm no. mm
FRS-VK 10-51/160 3849 16020 connection possibilities for up to 10 flexiblepipes FRS-R 51. Optional mounting as straight-through-, 90°-distributor or combined.Combined installation with round single spigotspossible (FRS-ES 75, Ref.-No. 3852, see below).With sound absorbing lining and large inspectionopening.
Distribution box 10-fold
600 500
300
78
99
99
180
Distribution box 15-fold
200
400 300
78
125
99
99
Distribution box 6-75 1)
Type Ref. Ø NW Ø 75 mm no. mm
FRS-VK 6-75/125 3846 12512 connection possibilities for up to 6 flexiblepipes FRS-R 75. Optional mounting as straight-through-, 90°-distributor or combined.Combined installation with oval single spigotspossible (FRS-ES 51, Ref.-No. 3851, see below).With sound absorbing lining and large inspectionopening.
Distribution box 6-fold
78
96
65
Single spigot, cap Single spigot, bayonet catch cap
Type Ref. SUno.
Single spigot , Ø 75 mm
FRS-ES 75 3852 1 St.
Single spigot, 114 x 51 mm
FRS-ES 51 3851 1 St.
Bayonet catch cap
FRS-VDB 3853 1 St.Additional single spigots to connect round pipeFRS-R 75 and/or oval pipe FRS-R 51 to distribu-tion box. By means of bayonet catch cap simplyand variably positionable.Seals tightly, inlusive pipe fixing clips (2 pcs),made from impact-resistant polypropylene.Bayonet catch cap for the single spigot holes atthe distribution box.
96
112 117
54
96
1) incl. 2 pcs. caps. 2) incl. 4 pcs. caps.
Fig.: Type L
132
Flexible ducting system FlexPipe® FRSRound Ø 63 mm
120 64
64
~150
125
70
195 190
100
ø 64
300
Floor outlet with grille 2)
Type Ref.Ø 63 mm no.
FRS-BKGS 2-63 9991Floor outlet with grille consisting of:– 1 floor outlet for grilles nom. dia. 160– 1 floor grille made of stainless steel withadjustable air flow.
64
Ceiling outlet
Short elbow 90°
Adapting elbow 90°
Floor outlet with grille
Grille with box
Grille with elbow box
Sleeve, cap, seal ring
Grille with box, straight2)
Type Ref.Ø 63 mm no.
FRS-WDS 2-63 9993Grille with box consisting of:– outlet box with sliding type fitting– grille white (FK-WA 200 W), 250 x 103 mm
Grille with elbow box, 90° 2)
Type Ref.Ø 63 mm no.
FRS-WBS 2-63 9995Grille with box consisting of:– outlet box with sliding type fitting– grille white (FK-WA 200 W), 250 x 103 mm
Sleeve, cap, seal ring
Type Ref. SUØ 63 mm no.
FRS-VM 63 Sleeve 9329
FRS-VD 63 Cap 9330 10 St.
FRS-DR 63 Seal ring 9331 10 St. Note: At each joint section (pipe/pipe, pipe/fit-ting), a sealing ring (for IP 66) must be used.Please order corresponding number separately.Coating with a lubricant recommended for theassembly.
Ceiling outlet 2) for valves DN 125
Type Ref.Ø 63 mm no.
FRS-DKV 2-63/125 9430Ceiling outlet incl. cover to avoid soil in the sys-tem during construction work. For intake and ex-tract valves nom. dia. 125 (accessories, see page136).
Short elbow 90°
Type Ref.Ø 63 mm no.
FRS-B 63 9348Elbow 90° for bend radius < 2 x duct outerdiameter.
Adapting elbow 90°
Type Ref.Ø 63 mm no.
FRS-B 75/2-63 9341Adapting elbow 90° as adaptor from 1 x 75 mmto 2 flexible ducts nom. dia. 63 mm.
Floor box
Floor grille
Distribution box 6-63, 12-63 1)
Type Ref. Ø NW Ø 63 mm no. mm
FRS-VK 6-63/125 9355 125
FRS-VK 12-63/160 9336 160To connect up to 6 or 12 flexible ducts FRS-R 63.As the box is noise-absorbing it is also suitableas silencer element. Choice of manifold positionwith 12-63, the cover of the access opening.Therefore the distribution box can be used forvertical and horizontal positioning
Distribution box 18-63 1)
Type Ref. Ø NW Ø 63 mm no. mm
FRS-VK 18-63/180 9364 180To connect up to 18 flexible ducts FRS-R 63.As the box is noise-absorbing it is also suitableas silencer element. The connecting plate withthe pipe spigots is interchangeable with the in-spection door and can be shifted by 90°. There-fore the box can be used for vertical and horizon-tal positioning.
Distribution box 18-63
Distribution box 6-63, 12-63
All dim. in mm* FRS-VK 6-63/125
FlexPipe® duct round FlexPipe® duct round (bund = 50 run. m)
Type Ref. Dim. in mmØ 63 mm no. Outer-Ø Inner-Ø
FRS-R 63 9327 63 52
1) incl. 6 pcs. caps. 2) ncl. 1 pc. cap.
� Available in two sizes anddesigns
� FlexPipe® FRS 63Outer-Ø: 63 mm, inner-Ø:52 mm for air flow vol. up to20 m³/h.
� FlexPipe®plus
Outer-Ø: 75 mm, inner-Ø:63 mm for air flow vol. up to30 m³/h. Can be combined withoval pipe FRS-R51 and ovalcomponents, see page 128 on.
FlexPipe® flexible ducting systemis directly laid into or on theconcrete. – Simple to plan and easy toinstall through star shapedlaying.
– Convenient handling due tothe light weight.
– Fast initiation, constant airdistribution.
– Easy to clean.
53
� Characteristics and advan-tages
� Special ventilation duct made ofhygienically safe PE-HD newmaterial, odourless.
� The two-layered structure – cor-rugated outside, smooth insideand antistatic – guarantees:
– very low air flow resistance andhigh sound absorption.
– minimal dirt deposits.– easy to clean.
� Laying� The FlexPipe® polymer pipe has
a high resilience (SR24 > 8 kN/m²)and can simply be laid directlyinto, on or under the concreteceiling in the desired course dueto the high flexibility.
� Air- and watertight connection issimply made by use of the FRSseal rings.
133
KWL®
with
heat
reco
very
Flat polymer duct system FFor ceiling and wall laying
Flat polymer duct system F � Laying� Easy and fast laying due to the
low weight.� Joining of sections of all kinds
allows numerous possibilities.� Space-saving and universal.� Ideal for renovation of existing
buildings and prefabricatedhouses.
� CharacteristicsAll sections of white, antistaticpolymer. Hardly inflammable B1,DIN 4102. Max. temperature+50 °C.
� Duct-concept and mounting� Specially shaped duct alignment
starting at either the unit or thedistributor air intakes/outlets ofthe rooms. Branch connectionensured by T-pieces.
� Cross-section surface for airflow volume of up to 150 m³/h.
� The connections of the formedparts are built as slip-in sleeves;duct connection is done by out-side-connection sleeves.
� Requires air-tight connectionachieved by using duct tape(accessories).
� Fixation of the pieces usingmounting bracket FB.
220 220
54
54
Inne
n
Innen
Inne
n
Innen
310
220
54
220
54
Innen
Inne
n
Inne
n
Innen
54
220 1000
Außen
Auß
en
220 220
54
54
Inne
n
Innen Innen
Inne
n
All dimensions in mm
Flat duct w/o sleeve, length 1 mFOM Ref. no. 0624
Flat duct T-pieceFTS Ref. no. 0631
90°-bend horizontalFBH 90 Ref. no. 0629
Flexible bendFBO Ref. no. 0632
90°-bend verticalFBV 90 Ref. no. 0630
End piecewith connection from Ø to FE 100 Ref. no. 0621FE 125 Ref. no. 0622
End piece with connection from Ø to with 1 mtr. tube and 2 bracketsFU 90/100 Ref. no. 0627FU 90/125 Ref. no. 0638
Connectionfrom Ø to FUE 100 Ref. no. 0628FUE 125 Ref. no. 0639
Flat duct connectorFV Ref. no. 0625
Mounting bracketFB Ref. no. 0626
StripKLB Ref. no. 0619PVS-strip, width 50 mm, roll with20 mtrs length.
54
220
ø 100
Innen
ø 125
Inne
n
54
220 240
ø 100
Inne
n
ø 125
Innen
220
220
54
54
Innen
Innen
Innen
Inne
n
220 20
54
Innen
Inne
n
220
54
62 Inne
n
Innen
External
Internal Internal
Internal
Internal
Internal
Internal
Internal
InternalInternal
Internal Internal
InternalInternal
Exte
rnal
Inte
rnal
Inte
rnal
Inte
rnal
Inte
rnal
Inte
rnal
Inte
rnal
Inte
rnal
Inte
rnal
Inte
rnal
Inte
rnal
Inte
rnal
