FLEX I/O™ and FLEX I/O-XT™ Modules · 1794-IF8IHNFXT FLEX Isolated HART Analog 8 Input Module,...
Transcript of FLEX I/O™ and FLEX I/O-XT™ Modules · 1794-IF8IHNFXT FLEX Isolated HART Analog 8 Input Module,...
AdvantagesReduced Space: Wire directly from sensor to terminal base and eliminate the terminal strip
Functionality: From two point to 32-point modules offer functions of larger rack-based I/O
Increased Productivity: Easy configuration and setup of I/O modules using wizards speeds engineering and installation
Reduced Downtime: Removal and Insertion Under Power (RIUP) and module level diagnostics
Exceptional Choices: More than 90 varieties and specialty modules meet the needs of a wide variety of applications
Network Flexibility: Communicates on EtherNet/IP, ControlNet, DeviceNet, Remote I/O and other open networks
Improved Plant Operations: HART analog modules pass through HART data to asset management software or controller for improved plant operations
FLEX I/O offers all the functions of larger rack-based I/O without the space requirements. Its cost effectiveness, flexibility, modularity, and reliability have made it the most popular distributed I/O platform with more then four million modules sold.
FLEX I/O helps eliminate multiple long wiring runs, reduces terminations, decreases engineering and installation costs and time, and substantially reduces down time. It complements all Rockwell Automation controller platforms for a distributed I/O solution.
The FLEX I/O system can communicate on EtherNet/IP, ControlNet, DeviceNet, and many other open networks including, but not limited to, Remote I/O, PROFIBUS DP, and Interbus-S. You can independently select the I/O, termination style, and network to meet your application needs.
FLEX I/O™ and FLEX I/O-XT™ ModulesIn-Cabinet Modular I/O Platform
The FLEX I/O system contains a network adapter, terminal bases, and I/O modules. You can power the system with a FLEX power supply or any other compatible power source. You can use as many as eight terminal bases per adapter, allowing a wide variety of I/O channels per adapter, or mix and match digital, analog and specialty I/O modules to meet your specific needs. For instance,
• 256 digital inputs/outputs with 32-point modules
• 96 analog inputs
FLEX I/O can be mounted horizontally or vertically on standard 35mm DIN rail or panel mounted without derating. These modules also come in an XT version, which are conformally coated, and operate in extreme environments. These modules operate in a temperature range from -20C/-25C to 70C.
FLEX Ex™, an intrinsically safe line extension is also in the FLEX I/O family. FLEX Ex is designed to be distributed throughout hazardous areas without the use of bulky explosion proof or purged enclosures.
Optional 1794-CE1or 1794-CE3Extender Cable
Only 1 cable per system
30439-MC30439-MC
MOD
LINK 1 LINK 2REDUNDANY MEDIA
ADAPTER1794-AENTR
MOD
LINK 1 LINK 2REDUNDANY MEDIA
ADAPTER1794-AENTR
FLEX I/O Products
General Specifications Operating Temperature
• FLEX I/O 0...55 ºC (32....131 ºF)
• FLEX I/O-XT -20/-25...70 ºC (-4....185 ºF)
Storage Temperature -40...85 ºC (-40...185 ºF)
Relative Humidity 5...95% non-condensing
Shock, Operating1
30 g peak acceleration, 11( ±1) ms pulse width
Shock,Non-Operating
1 50 g peak acceleration, 11( ±1) ms pulse width
Vibration1
Tested 5 g @ 10...500 Hz per IEC 68-2-6
Dimensions (HxWxD), Approx. Weight
I/O Modules 46 x 94 x 53 mm (1.8 x 3.7 x 2.1 in) 0.1 kg (0.3 lb)
I/O Adapters 87 x 68 x 69 mm (3.4 x 2.7 x 2.7 in) 0.2 kg (0.4 lb)
Terminal Bases 94 x 94 x 69 mm (3.4 x 3.7 x 2.7 in) 0.2 kg (0.5 lb)
Power Supplies 1794-PS131794-PS3
87 x 68 x 69 mm (3.4 x 2.7 x 2.7 in) 0.2 kg (0.5 lb)87 x 94 x 69 mm (3.4 x 3.7 x 2.7 in) 0.4 kg (0.8 lb)
The dimensions for 1794-AENT are 87 x 94 x 69 mm (3.4 x 3.7 x 2.7 in) 1794-AENTR, 1794-ACN15, and 1794-ACNR15 adapters have the following dimensions: 87.4 x 94 x 92 mm (3.4 x 3.7 x 3.6 in)
Product Catalog Number Description
CommunicationsComponents Adapter 1794-ACN15 24Vdc ControlNet Adapter
1794-ACNR15 24Vdc ControlNet Redundant Media Adapter
1794-ACNR15XT 24Vdc ControlNet Redundant Media Adapter, XTEMP (-20C to 70C)
1794-ADN 24Vdc DeviceNet Adapter
1794-AENT 24Vdc EtherNet I/P Adapter
1794-AENTR 24Vdc EtherNet I/P, 2-Port, Twisted-Pair Media
1794-AENTRXT 24Vdc EtherNet I/P, 2-Port, Twisted-Pair Media, XTEMP (-25C to 70C)
1794-APB 12Mbps PROFIBUS DP Adapter
1794-APBDV1 12Mbps PROFIBUS DP –V1 Adapter
1794-ASB 24Vdc Remote I/O Adapter (to 8 modules)
1794-ASB2 24Vdc Remote I/O Adapter (to 2 modules)
Termination Styles Terminal Base Units 1794-TB2 2-Wire Cage Clamp Terminal Base Unit
1794-TB32
3-Wire Cage Clamp Terminal Base Unit
1794-TB3S2
3-Wire Spring Clamp Terminal Base Unit
1794-TB32 32-Point Cage Clamp Terminal Base Unit
1794-TB32S 32-Point Spring Clamp Terminal Base Unit
1794-TB3T2
Terminal Base Unit
1794-TB3TS2
Spring Clamp Temperature Terminal Base Unit
1794-TB3G2
Cage Clamp Grounded Terminal Base Unit
1794-TB3GS2
Spring Clamp Grounded Terminal Base Unit
1794-TBN2
Terminal Base Unit (NEMA-style)
1794-TBNF Fused Terminal Base Unit (NEMA-style)
1794-TBKD Knifeswitch Disconnect Terminal Base Unit
1794-TB37DS 37 Pin D-Shell Termination (digital & analog modules)
1794-TB62DS 62 Pin D-Shell Termination (32pt. I/O modules) 1
To maintain these specifications, you must use DIN rail locks specifications, you must use DIN rail locks2
When product is marked. See specific module installation instructions for details
MOD
LINK 1 LINK 2REDUNDANY MEDIA
ADAPTER1794-AENTR
30441-MC
Product Catalog Number Description
AC I/O 120Vac Modules 1794-IA8 120Vac 8 Input Module
1794-IA8I 120Vac 8 Isolated Input Module
1794-IA16 120Vac 16 Input Module
1794-OA8 120Vac Output Module
1794-OA8I 120Vac 8 Isolated Output Module
1794-OA16 120Vac 16 Output Module
220Vac Modules 1794-IM8 220Vac 8 Input Module
1794-IM16 220Vac 16 Input Module
1794-OM8 220Vac 8 Output Module
1794-OM16 220Vac 16 Output Module
DC I/O 5Vdc Modules 1794-IG16 5Vdc 16 TTL Input Module
1794-OG16 5Vdc 16 TTL Output Module
24Vdc Modules 1794-IB8 24Vdc 8 Sink Input Module
1794-IB10X0B6 24Vdc 10 Sink Input/6 2A Source Output Module
1794-IB10X0B6XT 24Vdc 10 Sink Input/6 2A Source Output Module, XTEMP (-20C to 70C)
1794-IB16 24Vdc 16 Sink Input Module
1794-IB16XT 24Vdc 16 Sink Input Module, XTEMP (-20C to 70C)
1794-IB16D 24Vdc 16 Sink Input Module, with Diagnostics
1794-IB16X0B16P 24Vdc Combo Module, 16 Sink Inputs/16 Source Ouputs, Protected Module
1794-IB32 24Vdc 32 Sink Input Module
1794-IV16 24Vdc 16 Source Input Module
1794-IV32 24Vdc 32 Source Input Module
1794-OB8 24Vdc 8 Source Output Module
1794-OB8EP 24Vdc Electronically Fused 8 2A Output Module, Protected
1794-OB8EPXT 24Vdc Electronically Fused 8 2A Output Module, XTEMP (-20C to 70C)
1794-OB16 24Vdc 16 Source Output Module
1794-0B16D 24Vdc 16 Source Output Module, with Diagnostics
1794-OB16P 24Vdc 16 Source Output Module, Protected
1794-OB16PXT 24Vdc 16 Source Output Module, Protected, XTEMP (-20C to 70C)
1794-OB32P 24Vdc 32 Source Output Module, Protected
1794-OV32 24Vdc 32 Source Output Module
1794-OV16 24Vdc 16 Sink Output Module
1794-OV16P 24Vdc 16 Sink Output Module, Protected
48Vdc 1794-IC16 48Vdc 16 Sink Input Module
1794-OC16 48Vdc 16 Source Output Module
125Vdc 1794-IH16 125Vdc 16 Sink Input Module
120 VAC INPUT - ISOLATED
1794-IA8I
Product Catalog Number Description
Analog I/O 24Vdc Analog Modules 1794-IE4XOE2 24Vdc 4 Input/2 Output Analog Combo Module
1794-IE4XOE2XT 24Vdc 4 Input/2 Output Analog Combo Module, XTEMP (-20C to 70C)
1794-IE8 24Vdc Selectable Analog 8 Input Module
1794-IE8XT 24Vdc Selectable Analog 8 Input Module, XTEMP (-20C to 70C)
1794-IE8H 24V dc Selectable Analog, 8 Input, with HART pass-thru
1794-IE8XOE4 24Vdc 8 Input/4 Output Selectable Analog Module
1794-IE12 24Vdc Selectable Analog 12 Input Module
1794-OE4 24Vdc Selectable Analog 4 Output Module
1794-OE4XT 24Vdc Selectable Analog 4 Output Module, XTEMP (-20C to 70C)
1794-OE8H 24Vdc Selectable Analog 8 Output, with HART pass-thru
1794-OE12 24Vdc Selectable Analog 12 Output Module
Isolated Analog I/O Analog Modules 1794-IF4I 24Vdc Source Isolated 4 Input Module
1794-IF4IXT 24Vdc Source Isolated 4 Input Module, XTEMP (-20C to 70C)
1794-IF2XOF2I 24Vdc 2 Input/2 Output Isolated Analog Combo Module
1794-IF2XOF2IXT 24Vdc 2 Input/2 Output Isolated Analog Combo Module, XTEMP (-20C to 70C)
1794-OF4I 24Vdc Source Isolated 4 Output Module
1794-OF4IXT 24Vdc Source Isolated 4 Output Module, XTEMP (-20C to 70C)
1794-IF8IH FLEX Isolated HART Analog Input
1794-OF8IH FLEX Isolated HART Analog Output
1794-IF8IHNFXT FLEX Isolated HART Analog 8 Input Module, XTEMP (-25C to 70C)
Relay Specialty I/O Relay Module 1794-OW8 8 Isolated Relay Output Module
1794-0W8XT 8 Channel Relay Output Module, XTEMP (-20C to 70C)
Encoder Input Module 1794-ID2 24Vdc 2 Channel Incremental Encoder Input Module
Frequency InputModule
1794-IJ2 24Vdc 2 Input Frequency Module
1794-IJ2XT 2 Channel Counter Module, XTEMP (-20C to 70C)
Pulse CounterInput Module
1794-IP4 24Vdc 4 Channel Pulse Counter Module
RTD Input Module 1794-IR8 24Vdc RTD Input Module
Thermocouple/ RTD Input Module
1794-IRT8 24Vdc Thermocouple/RTD/mV Module
1794-IRT8XT 24Vdc Thermocouple/RTD/mV Module, XTEMP (-20C to 70C)
Thermocouple/ mV Input Module
1794-IT8 24Vdc Thermocouple/mV Module
Very High Speed Counter Module
1794-VHSC 24Vdc 4 Digital Output Module
Power Supply Power Supply 1794-PS13 24Vdc, 1.3A
1794-PS3 24Vdc, 3.0A
1794-IOW8
Product Catalog Number Description
Accessories Accessories 1794-CE1 Extender Cable, 0.3m (1 ft.)
1794-CE3 Extender Cable, 0.9m (3 ft.)
1794-CJC2 Cold Junction Compensator Kit
1794-N2 FLEX Dummy Filler Module
1794-NM1 Mounting Kit for panel mounting
1794-LBL Label Kit for terminal bases
1492-EA35 DIN Rail Locks (for vertical mounting)
eCADWorks (ABECAD) free at: http://www.rockwellautomation.com/en/e-tools/drawings.html
Integrated Architecture Builder 4.0 free at: http://www.rockwellautomation.com/en/e-tools/configuration.html
Product
Certifications2 UL Listed Industrial Control Equipment
UL Listed for Class l, Division 2 Groups A, B, C, D Hazardous Locations
CE Marked for all applicable directives3
CSA Certified Process Control Equipment for Class l, Division 2 Group A, B, C, D Hazardous Locations
C-Tick Marked for all applicable acts
Marine Certification4
SIL 2 Certification5
XT Products FLEX I/O conformal coated products meet or exceed the following standards:
ANSI / ISA-S71.04-1985, Class Gl, G2, G3 environments
CEI IEC 6065A-4 Class 1 and 2 environments
UL 746E
Publications 1794-SG002_-EN-P FLEX Selection Guide
ACIG-BR002_-EN-P Distributed I/O Products Brochure
1797-PP001H-EN-P Flex Ex I/O Product Profile
XT-PP001F-EN-E Extreme Environment System3CE Marking - Declaration of Conformity: http://www.rockwellautomation.com/products/certification/ce/index.html4See the Certification for Marine and Off-shore Applications web site for details5See the SIL 2: http://www.rockwellautomation.com/products/certification/ce/index.html
Encompass Partner ProductsCompany Product Description Connectivity
ProSoft Technology, Inc. “C” Programmable Solutions “C” Programmable, Application Development and other application dependent interfaces available.
Backplane
ProSoft Technology, Inc. FLEX-Communication Adapters 3170 Family
Allows Rockwell Automation FLEX I/O modules to interface to various protocols.
RS-232/422/485, Other Networks, Remote I/O
ProSoft Technology, Inc. FLEX Communication Adapters MVI 94 Family
The FLEX communication modules are designed to connect the FLEX platform to any serial field device.
RS-232/422/485, Other Networks, Serial/DF1
Spectrum Controls Inc. I/O Modules - Analog/DiscreteFor more information go to www.rockwellautomation.com/encompass and search for referenced products under the platform FLEX I/O.
Publication 1794-PP019G-EN-P – February 2015 Copyright © 2015 Rockwell Automation, Inc. All Rights Reserved. Printed in USA. Supersedes Publication 1794-PP019F-EN-P – November 2011
Allen-Bradley, FLEX I/O, FLEX I/O-XT, FLEX Ex and Rockwell Automation are registered trademarks of Rockwell Automation.