82

Flare Tools

Deluxe Flare ToolFaceted, hard chrome finished cone rolls out and burnishes perfect 45O flare above the tube holding mechanism. Original wall thickness is maintained at the baseline of the flare. Large handle for good leverage and precision threads on feed screw make flaring effortless.1/8” thru 3/4” capacity.

945TH

Papco Flare ToolOne piece unit with swing away cone assembly facilitates quick easy flaring even in tight quarters.3/16” thru 5/8” capacity.

420

Rol-Air Flare ToolFlares roll out above the die bar by super smooth faceted cone. Automatically burnishes flare face. Slip-on yoke permits use in tight quarters. Heat treated dies grip tubing without scoring.3/16” thru 5/8” capacity.

Grabber Flare Tool

Large Size Flare Tool

Self adjusting tube holder permits flaring any size tubing within its range. Automatically burnishes flare face.3/16” thru 5/8” capacity.

Flares up to 1-1/8” O.D. tubing. Yoke fits over flare bar and locks into place. Long handle and precision threaded feed screw.3/4”, 7/8”, 1”, and 1-1/8” O.D. capacity.

500FC

525F

60290

Papco Cutting ToolEnclosed feed mechanism and wide rollers provide clean cuts on all grades of copper or aluminum tubing. Includes fold away reamer and spare cutting wheel.1/8” thru 1-1/8” capacity.

512

78

34

58

11 8

Tips for Flaring• An incorrect flare is one of the most common

sources of leaks. To help prevent leaks, cut tubing with a sharp wheel for a clean right angle cut. To avoid tube constriction, don’t feed the screw too fast.

• Since unremoved burrs can break off into the tubing or scratch the flared surface, remove burrs with a deburring tool.

• A flare tool with burnishing cone puts a high polish on the flare and rolls out a perfect 45° flare for a good seal. Over or under flaring prevents a good seal. Use a drop of oil on the flaring cone and feed screw for precise action.

83

Service Equipment

Sherlock Leak DetectorSherlock Low Temp leak detector is designed specifically for finding gas leaks at sub freezing temperatures. No mixing required.

BRUSH - TOP DISP

SHERLOCK LEAK DETECTOR

1 pt Bottle w/Brush Top Empty

1 gal Bulk Container

Teflon Tape

TT31202 1/2 X 520”TT31212 3/4 X 280”

Specially selected teflon tape is high density for excellent sealing on gas applications.

Pure Anhydrous MethanolPure anhydrous methanol is extremely effective in neutralizing moisture in propane storage containers. It has a high affinity for water and a boiling point lower than water.Available in 1 gal, 2-1/2 gal, 5 gal or 55 gal.

Pipe Joint Compound

PLS2 1/4 pt Gasoila 1/4 pt

Rectorseal #5 1/4 ptRectorseal #5 1/2 pt.

Rectorseal #100 1/4 ptRectorseal #100 1/2 pt.

Zoom Spout OilerHigh grade, light weight oil with retractable zoom spout to get into the tighest spots.

Gasoila is a blue/white, opaque, viscous, non-hardening, smooth paste with Teflon.

PLS2 is a gray, opaque, viscous, non-hardening, smooth paste with a high solids content.

Rectorseal #100 is a white, opaque, viscous, non-hardening, smooth paste with Teflon.

Rectorseal #5 is a slow dry, soft set, yellow paste for general piping service.

Gas Valve GreaseY70AA-1 Gas Valve Grease provides excellent lubricaton for gas valves from 32O to 175OF.2-1/2 oz tube

Y70AA-1

17-076

S HERLOC KLEAK

W I NTON PRODUC T S

DETECTOR

PLS 2

PIPETHREAD& GASKETSEALER

ONE QUARTER PINT

GASOILA

THREADSEALANTSOFT-SET

ONE QUARTER PINT

WITH TEFLON

"SERVING THE PROFESSIONAL SINCE 1937"

NET CONTENTS: 4 FL. OZ. (118 ML)

5SLOWDRY

CAUTION!COMBUSTIBLE AT 180OF SETA CC

SOFTSET

Pipe Thread Sealant

RECTORSEAL

100NON-

SEIZING

No.

Thread Sealing Paste with VIRGIN "TEFLON"

VIRGIN

NON-HARDENING

LOWFRICTION

Pipe Thread Sealant

RECTORSEAL

SPOUTZOOM

OILER

TF

E ThreadSeal Tape

Pure AnhydrousMethanol

341 GAS

VALVE

GREAS

E

84

Service Equipment

Safety Approved Flashlight

1259

HWC

Mine Safety and UL approved flashlight incorporates circuit breakers that separate a broken bulb from the battery source instantly. Eliminates the source of ignition from a glowing filament in a cracked or broken bulb.

Truck Wheel Chock Blocks

Railcar Chock Blocks Rail Sign Post

Heavy duty ribbed aluminum construction. Sold in pairs with 3 ft. connecting chain.LWC Light Wheel Chock for pickups and small service trucks.HWC Heavy Wheel Chock for bobtails and large service trucks.

Cast Steel blocks with heat treated spurs which bite into track to keep chocks from slipping. 25 lbs. shipping weight. Sold in pairs with 3 ft. chain.

Easy on, easy off sign post holds safety sign during railcar unloading.Sign not included.

23-173

Style “B” Chocks for Exposed Rail Underside View

Spurs

Model Description Width Length Height Weight

LWC Light Weight Chock 6” 7” 6” 10 lbs

HWC Heavy Weight Chock 7” 10-3/4” 8” 16 lbs

Edmont Seamless Monkey Grip GlovesRaised Finish Winter Monkey Grip gloves have a textured surface that provides an excellent grip for easier, safer handling of wet and dry materials. Tough, flexible vinyl coating provides a seamless surface to resist liquid penetration and abrasion. A soft, comfortable non-woven inner lining insulates against the cold.

23-171 Knitwrist fully coated large.23-173 Safety Cuff fully coated large.

23-171

Winter Tuf-Duk gloves are vinyl impregnated in two-tone brown and gold. The material repels liquid but the gloves are not liquid proof because of the seams. Provide excellent grip and long wear.

31-791 Driver’s Style large. 31-791

Edmont Tuf-Duk Gloves

STOPT A N K C A RCONNECTED

85

MasterKote Paint

Silicone Alkyd Enamel

Paint Cost

Highest Quality. The best choice for large storage tanks.You can’t beat silicone for resistance to weathering, especially ultra-violet light. It gives the pigments far better protection. Superior durability for large storage tanks. Outperforms standard enamels.

The cost of the paint is only about 25% of doing the paint job. With this in mind, it doesn’t make much sense to buy anything but a top quality paint. The price per gallon is not a reliable indicator of the total cost of painting. You should also consider the solids per gallon. (See the “What About Paint Coverage” inset).

QUALITY COATINGS SINCE 1955

PolyurethaneIndustrial Enamel

Master Products CompanyGoldsboro, N.C.

HIGH GLOSS

INDUSTRIALUSE ONLY

9001

R

Excellent durability. The best choice for domestic tanks.The toughness of the polyurethane film gives outstanding exterior durability and chemical resistance plus better gloss and fade resistance than standard enamels.

Polyurethane Enamel

Good durability. Good choice for domestic tanks.Formulated with durable alkyd resins and exterior grade pigments. The alkyd enamel provides high gloss that resists wear and weather with good one coat hiding.

Alkyd Enamel

High quality primer for all steel products.Heavy on the rust inhibitive additives makes this primer an exceptional first coat for all steel surfaces. Provides both barrier and great adhesion for the final paint coat.

Primer

Phenolic protection you can count on.Ringmaster phenolic is a must for cylinder bottom protection. It penetrates rust and coats the cylinder bottom and all the crevices around the footring for a hard, long lasting protective finish.

Ringmaster

QUALITY COATINGS SINCE 1955

Equipment andTank Enamel

Master Products CompanyGoldsboro, N.C.

ALUMINUM

INDUSTRIALUSE ONLY

351

R

QUALITY COATINGS SINCE 1955

SILICONE ALKYDGLOSS ENAMEL

Outstanding Gloss

Interior/ExteriorChecks Rust

Master Products CompanyGoldsboro, N.C.

and Color Retention

HEAVY DUTY

9010

R

9010 White

9001White9003 Aluminum9006 Trinity Gray4503 Yellow4703 Red

351 Aluminum

Ringmaster

7780 Primer

R

QUALITY COATINGS SINCE 1955

QUALITY COATINGS SINCE 1955

Black PhenolicPaint

Master Products Company

(Contains No Tar Or Asphalt)

Goldsboro, N.C.

RINGMASTER

INDUSTRIALUSE ONLY

R

RUST-OLEUMPREMIUM

OIL BASED ENAMEL

HIGH PERFORMANCE

INDUSTRIAL STRENGTH

PROFESSIONAL

Tough, rust preventitive finishfor industrial applications.

7780-402 PRIMER

WHEN YOUR COMPANY'S IMAGE MATTERSUSE MASTERKOTE

86

Painting Tools

BUCKETBONNET

MC-5 5 Gal Steel PailMG-5 Metal Bucket GridPCB-3 Bonnet (3 pk)

The 5 gallon bucket with a metal grid and bucket bonnet is a real easy system for daily tank painting.

The metal grid allows you to maintain an even paint load on the roller and keeps the drips in the bucket.

At the end of the day, simply hang the roller on the grid and cover the bucket with the bonnet.

PROAM-20 2” Brush

900-576 Roller Handle86M-9 Roller Cover

114-S Wire Brush w/Scraper

We are looking for at least 2 1/2 mils coverage for good steel protection.

What About Paint Coverage?

Keep it easy

1 GAL

.50 GAL

642 sq ft

1 1/4 mil thick231 cu in115.5 cu in

TOTALVOLUME

SOLIDSIN GALLON

COVERAGEPER COAT

= =

MASTERKOTE PAINT CONTAINS APPROXIMATELY 50% SOLIDS BY VOLUME

Use ONE gallon to apply two coats on a 1000 gal tank to get 2 1/2 mil protection.

Here's what happens when we roll the paint out.The 50% vehicle in thegallon evaporates.The 50% solids in the gallonspread out to a 1 1/4 milfilm covering 642 sq.ft.A second coat providesan additional 1 1/4 mils.Total coverage 2 1/2 mils.

TANK SIZEGALLONS

30,00018,00012,0001,000500325250120

2,0001,2001,000200100786238

8651

2 tanks2 tanks4 tanks7 tanks

APPROXSQ. FT.

GALLONSREQUIRED

The chart assumes that we are tryingto protect the tank with 2 1/2 mils ofthe finished coat. The numbers are based on Masterkote paint whichaverages 500 sq. ft. per gallon andrequires two coats for proper finish.Lesser quality paints will require morepaint to attain the same protection.

ASK ABOUT THE SOLIDS IN THE CAN!

87

Electrical Test Meters

DM383B

Full Function Digital MultimeterRead volts, amps, continuity with this high accuracy large display ruggedized meter.Includes digital multimeter with boot, 9v battery, 10A and 5A fuses, and rubberized test lead set.5 YR warranty.

Combustible Gas Leak Detectors

Electronic ManometerA digital, time saving alternative to U-tube pressure measurement.

Use to measure gas or draft pressures in light commercial and residential systems.

EM151

+LO BAT

In-Wg

Scale(Hold for OFF)

ZERO

EM151

DM383B DIGITAL MULTIMETER

MAX HOLD

!

A C A

A A VC O Mm A

D C A

D C VO H M S

D A T AM

H O L D

ACV

400m

400m40M4M

400K40K

4K

400

400m40m

4m

4

400

400

10A MAXFUSED 500mA

FUSED

CAT II 1000VCAT III 600V

10A10A 4A4A

4m

40m

400m

40

400

750

1000

40040

40

4

R

CombustibleGas Leak Detector

OFF

T I C A D J U S T

ON ALM

ALARM SET

READY

ALARM

CD200

R

SPECIFICATION CD100A CD200

Size 8” X 4” X 1-1/2” 8-3/4” X 3-1/4” X 2-1/2”

Flexible Probe 18” 18”

Sensitivity 50 ppm 50 ppm

Lighted Tip Yes Yes

Tic Adjustment Thumbwheel Thumbwheel

Tic Indicator Single Flashing LED Six graduated LEDs

Adjustable Alarm No Yes

Ear Phone Option Included

Carrying Case Option Included

Battery 9 volt 4 - AA

SPECIFICATION EM151

Range -20” to +20” W.C.

Accuracy +/- 1.0% FS

Battery Life 50 hours

Auto Power Off Yes

Warranty 1 Year

ON / OFF

TIC ADJ

TIC

LOW BAT PWR OFF

COMBUSIBLE GASLEAK DETECTORCD100

CD100A CD200

Pinpoints gas leaks fast and easy. LED and alarm indicators.

CONTROLBODY

10-038ADAPTER

TO MILLIVOLTMETER

Safety Magnet Test

Thermocouple TestingUse the DC Volts 400m range which provides a best resolution of 0.1 millivolt.Powerpile TestingUse the DC Volts 4v range which provides a best resolution of 1 millivolt.

Function Range

DC Volts

AC Volts

400mV, 4V, 40V, 400V, 1000V

400mV, 4V, 40V, 400V

50-500 Hz 750V

DC Current

400uA, 4mA, 40mA, 400mA

4A

10A

AC Current50-500 Hz

400uA, 4mA, 40mA, 400mA

4A

10A

Resistance

400 Ohm, 4K Ohm, 40K Ohm400K Ohm, 4M Ohm

40M Ohm

88

Signs

WE STOP AT ALL RR CROSSINGS

17042D 2” X 36” Vinyl

Filling Information SignsCYLINDER FILLINGCAPACITY CHART

2.39 4.78 7.17 9.5611.914.316.719.121.523.926.228.631.033.4

1 2 3 4 5 6 7 8 91011121314

35.8 38.2 40.6 43.0 45.4 47.8 59.7 71.7 78.8 83.6 95.6105.1119.5239

15 16 17 18 19 20 25 30 33 35 40 44 50100

WC WCLBS. PROPANE LBS. PROPANE

NOTICEFOR YOUR SAFETYWE ARE PROHIBITED FROM FILLING

CYLINDERS THAT ARE:

NOT APPROVED FOR LP-GAS.

OVER 12 YRS. OLD WITHOUT RE-CERTIFICATION &VISUAL RE-CERTIFICATION FOR EACH ADDITIONAL 5YEARS OF SERVICE.

DAMAGED, BURNED, OR BY VISUAL INSPECTION,APPEAR UNSAFE.NOT EQUIPPED WITH A COLLAR OR CAP TO PROTECTTHE VALVE WHILE IN TRANSIT.

FEDERAL & STATE REGULATIONS REQUIRE HAULINGPROPANE CYLINDERS SECURED IN A VERTICAL POSITION

NO SMOKING - NO OPEN FLAME

1.

2.

3.

4.

CAUTION!OPERATOR SHALL BE IN AT TENDANCE DURING ENTIRE FILLING OPERATION

RECOMMENDED PROCEDURE FOR FILLING MOTOR FUEL AND MOTOR HOME TANKS

1. Stop engine -- set parking brake -- chock wheels.2. Attach static ground to vehicle being filled.3. If motor home -- Turn off pilots -- close tank outlet valves.4. Connect fill hose to tank.5. Open storage tank valves.6. Open liquid level gauge -- (80% bleeder).7. Slowly open valve at end of hose.8. Start pump.9. Close hose end valve when liquid appears (white cloud) at liquid level gauge (80% bleeder).9b. If tank is equipped with 80% stop fill, propane will stop entering tank at this point.10. Stop pump.11. Close liquid level gauge (80% bleeder).12. Disconnect hose from tank after pressure between valve and tank is reduced to 0 pressure.13. Replace all protective caps.14. Close storage tank valves and lock system.

CAUTION!OPERATOR SHALL BE IN ATTENDANCE DURING ENTIRE FILLING OPERATION

RECOMMENDED FILLING PROCEDURE FOR PORTABLE CYLINDERS

1. Before starting filling procedure, check Tare Weight (T.W.) of cylinder empty and the Water Capacity (W.C.) of cylinder. Both are stamped on the cylinder collar.2. Determine the propane capacity from chart or multiply water capacity (W.C.) X .42.3. Add Tare Weight and propane capacity together to determine TOTAL FILLED WEIGHT of cylinder.4. Set scale to indicate Total Filled Weight, plus weight of hose and hose end valve.5. Open storage tank valves.6. Open valve on cylinder.7. Open valve on hose.8. Start pump.9. Close hose end valve as soon as scale beam raises or indicator tips.10. Stop pump.11. Close cylinder valve.12. Disconnect hose from cylinder.13. Check weight of filled cylinder after filling connector has been dis- connected. If overfilled, remove to a stand pipe or evacuation system and remove excess propane. NEVER LEAVE CYLINDER OVERFILLED14. Install POL PLUG and WARNING LABELS.15. Close storage tank valves.

P-101Cylinder Filling Chart

12” X 12” Poly

P-102Cylinder Conditions

12” X 12” Poly

P-108Motor Fuel Procedure

12” X 12” Poly

P-109Cylinder Procedure

12” X 12” Poly

S1279 Refilling Info DecalCovers in depth the procedures for filling cylinders and permanently mounted vehicle tanks. 11” X 17” Vinyl

C A U T I O N- CYLINDER -

MUST BE HAULEDIN UPRIGHT POSITION

Cyl 20 GACylinder Must Be Hauled

10” X 14” Steel

17042 5-1/2” X 20” Steel

CAUTIONTHIS VEHICLE MAKES FULL STOPSAT ALL RAILROAD CROSSINGS

1075D 11” x 11” Vinyl1075G 11” x 11” Magnetic1075P 11” x 11” Poly

10752

10752

CG-126 Flip Type Placard1075 - 1005

13.5” X 13.5” Aluminum

QT NQTV-66 3” X 6.5” VinylV-65 3” X 4.5” Vinyl

11223344K55667788T99000VPILV - External Visual Insp. I - Internal Visual Insp. P - Pressure Test

L - Lining Test K - Leakage Test T - Thickness Test

TYPE OF TEST PERFORMED AS ABOVE DATE

ANNUALINSP.

MO.

Test DateHM-183SECT. 180-415SECT. 108-417 11223344K

55667788T99000VPILV - External Visual Insp. I - Internal Visual Insp. P - Pressure Test

L - Lining Test K - Leakage Test T - Thickness Test

TYPE OF TEST PERFORMED AS ABOVE DATE

5 YEARINSP.

MO.

Retest DateHM-183SECT. 180-415SECT. 108-417

V-31 Annual 6” x 15.5” Vinyl V-32 Five Year 6” x 15.5” Vinyl

EMERGENCYSHUTOFF

V-134 2.5” X 6” Vinyl

10752

MPH69 Slide-inPlacard Holder

(Placard sold separately)

Vehicle Signs and Decals

89

Signs

FLAMMABLEGAS

2

LIQUIFIEDPETROLEUM

GASUN 1075

Goggles GlovesHZ 116

PROPANE

1

4

0

NFPA HAZARD RATING

HEALTHHAZARD

FIREHAZARD

REACTIVITY

CONSULT CORRESPONDING MSDS FOR

FURTHER INFORMATION AND INSTRUCTIONS.

4 --- Severe3 --- Serious2 --- Moderate

1 --- Slight0 --- Minimal

AFFIX TO ALL PORTABLE CONTAINERS USED BY COMMERCIAL CUSTOMERS

-- Extremely Flammable Gas-- Heavier than Air-- Simple Asphyxiant-- Odorized to warn of its presence-- Contact with Liquid will cause Freezing of Tissue-- P.E.L. 1000 PPM-- Store container outside and keep cool (under 1300F)-- Turn off container valve when not in use

PERSONAL PROTECTION

DANGER --FLAMMABLE GAS UNDER PRESSURE LEAKING LP-GAS CAN CAUSE A FIRE OR EXPLOSION IF IGNITED CONTACT

DO NOT USE OR STORE CYLINDER IN A BUILDING, GARAGE OR ENCLOSED AREA.LP-GAS SUPPLIERS FOR REPAIRS OR DISPOSAL OF THIS CYLINDER OR UNUSED LP-GAS FOR OUTDOOR USE ONLY*

Customer Warning: When Connecting for Use: Know the odor of LP-gas. Under certain circumstances, youmay not be able to smell the odorant. If you hear or smell leakingLP-gas, immediately get everyone away from the cylinder andcall the �re department.

Use only in compliance with applicable codes. Read and follow appliance manufacturer's instructions. If regulator has an internal threaded coupling nut and thecylinder valve has large outside threads, tighten the couplingnut by turning clockwise (TYPE 1-Figure 1).If regulator has a plug-in connection, pull valve sleeve back,insert male plug fully and release valve sleeve(TYPE 2-Figure 2). If the regulator has an external threadedcoupling nut, it has left-hand threads and must be tightenedby turning counter clockwise (POL TYPE-Figure 3).

Turn o� all valves on appliance. Do not check for gas leaks with a match or open �ame. Apply soapy water at areas marked "X" after openingcylinder valve. If bubbles appear, close valve and have anLP-gas service person make neede repairs. Also checkappliance valves and connections for leakage before lightingappliance. Light appliance(s) following manufacturer's instructions. When appliance(s) is not in use, keep cylinder valve closed.

DO NOT REMOVE, DEFACE OR OBLITERATE THIS LABEL

EXCEPT AS AUTHORIZED BY NFPA 58 OR B 149.2 ((in Canada)

Caution your LP-gas supplier to:

LP-gas is heavier than air and can settle in low places whiledissipating. Contact with the liquid contents of the cylinder will cause freezeburns to the skin.

When the cylinder is not connected for use, keep the valveturned o�. If your cylinder valve looks like thePOL TYPE (Figure 3) and is of 45 lb. LP-Gas capacity or less,the outlet must also be plugged. Do not use, store or transport cylinder where it could be ex-posed to high temperatures. Relief valve can open allowing alarge amount of �ammable gas to escape. When transporting, keep cylinder secured in an upright positionwith cylinder valve turned o�. If the cylinder is of 45 lb. LP-Gascapacity or less and looks like the POL TYPE (Figure 3), theoutlet must also be plugged. Self-contained outdoor cooking appliances must be limited toone cylinder of 20 lbs LP-Gas capacity or less.

Do not allow children to tamper or play with the cylinder.

purge the cylinder of trapped air prior to �rst �llingcheck the cylinder requali�cation datebe certain not to over�ll the cylinder

TYPE 1(Figure 1)

PRESSURE RELIEF VALVEHANDWHEEL

HOSE

PLASTICCOUPLING

REGULATOR

PROPANE CYLINDER

X

X

X

X

X

X

X

VENTLIQUID LEVEL

INDICATOR(OPTIONAL)

ACMETHREADS

TYPE 2(Figure 2)

PRESSURE RELIEF VALVEHANDWHEEL

SPRING-LOADEDSLEEVE

HOSE

REGULATOR

PROPANE CYLINDER

X

X

X

X

XX

X

VENTLIQUID LEVEL

INDICATOR(OPTIONAL)

POL TYPE(Figure 3)

PRESSURE RELIEF VALVEHANDWHEEL

HOSE

REGULATOR

PROPANE CYLINDER

X

X

X

X

XX

X

VENTLIQUID LEVELINDICATOR

(OPTIONAL)*

SDOTDOT Compliance

1.25” x 3.75” Vinyl

CYL 2 in 1DOT & Duty to Warn

3” x 7” Vinyl

SP-53RDuty to Warn3” x 7” Vinyl

HZ-116OSHA Compliance

2.2” x 5” Vinyl

DANGER-FLAMMABLE GAS UNDER PRESSURE LEAKING LP-GAS CAN CAUSE A FIRE OR EXPLOSION

IF IGNITE

D CONTAC

TLP-GAS SUPPLIERS FORREPAIRS OR DISPOSAL OFTHIS CYLINDEROR UNUSED LP-GASFOROUTD

OORUSE

ONLY*

DONOTUSE ORSTORE CYLINDER IN A BUILDING, GARAGE OR ENCLOSED AREA.

CustomerWarning:

CustomerWarning:

FLAMMABLE

GAS

2

TYPE 1(Figure 1)

TYPE 2(Figure 2)

POLTYPE(Figure 3)

*

Cylinder Stickers

DANGER --FLAMMABLE GAS UNDER PRESSURE LEAKING LP-GAS CAN CAUSE A FIRE OR EXPLOSION IF IGNITED CONTACT

DO NOT USE OR STORE CYLINDER IN A BUILDING, GARAGE OR ENCLOSED AREA.LP-GAS SUPPLIERS FOR REPAIRS OR DISPOSAL OF THIS CYLINDER OR UNUSED LP-GAS FOR OUTDOOR USE ONLY*

Customer Warning: When Connecting for Use: Know the odor of LP-gas. Under certain circumstances, youmay not be able to smell the odorant. If you hear or smell leakingLP-gas, immediately get everyone away from the cylinder andcall the �re department.

Use only in compliance with applicable codes. Read and follow appliance manufacturer's instructions. If regulator has an internal threaded coupling nut and thecylinder valve has large outside threads, tighten the couplingnut by turning clockwise (TYPE 1-Figure 1).If regulator has a plug-in connection, pull valve sleeve back,insert male plug fully and release valve sleeve(TYPE 2-Figure 2). If the regulator has an external threadedcoupling nut, it has left-hand threads and must be tightenedby turning counter clockwise (POL TYPE-Figure 3).

Turn o� all valves on appliance. Do not check for gas leaks with a match or open �ame. Apply soapy water at areas marked "X" after openingcylinder valve. If bubbles appear, close valve and have anLP-gas service person make neede repairs. Also checkappliance valves and connections for leakage before lightingappliance.

Light appliance(s) following manufacturer's instructions. When appliance(s) is not in use, keep cylinder valve closed.

DO NOT REMOVE, DEFACE OR OBLITERATE THIS LABELEXCEPT AS AUTHORIZED BY NFPA 58 OR B 149.2 ((in Canada)

Caution your LP-gas supplier to:

LP-gas is heavier than air and can settle in low places whiledissipating. Contact with the liquid contents of the cylinder will cause freezeburns to the skin.

When the cylinder is not connected for use, keep the valveturned o�. If your cylinder valve looks like thePOL TYPE (Figure 3) and is of 45 lb. LP-Gas capacity or less,the outlet must also be plugged. Do not use, store or transport cylinder where it could be ex-posed to high temperatures. Relief valve can open allowing alarge amount of �ammable gas to escape. When transporting, keep cylinder secured in an upright positionwith cylinder valve turned o�. If the cylinder is of 45 lb. LP-Gascapacity or less and looks like the POL TYPE (Figure 3), theoutlet must also be plugged. Self-contained outdoor cooking appliances must be limited toone cylinder of 20 lbs LP-Gas capacity or less.

Do not allow children to tamper or play with the cylinder.

purge the cylinder of trapped air prior to �rst �llingcheck the cylinder requali�cation datebe certain not to over�ll the cylinder

TYPE 1(Figure 1)

PRESSURE RELIEF VALVEHANDWHEEL

HOSE

PLASTICCOUPLING

REGULATOR

PROPANE CYLINDER

X

X

X

X

X

X

X

VENTLIQUID LEVEL

INDICATOR(OPTIONAL)

ACMETHREADS

TYPE 2(Figure 2)

PRESSURE RELIEF VALVEHANDWHEEL

SPRING-LOADEDSLEEVE

HOSE

REGULATOR

PROPANE CYLINDER

X

X

X

X

XX

X

VENTLIQUID LEVEL

INDICATOR(OPTIONAL)

POL TYPE(Figure 3)

PRESSURE RELIEF VALVEHANDWHEEL

HOSE

REGULATOR

PROPANE CYLINDER

X

X

X

X

XX

X

VENTLIQUID LEVELINDICATOR

(OPTIONAL)

*

Goggles Gloves

PROPANE

1

4

0

NFPA HAZARD RATING

HEALTHHAZARD

FIREHAZARD

REACTIVITY

CONSULT CORRESPONDING MSDS FORFURTHER INFORMATION AND INSTRUCTIONS.

4 --- Severe3 --- Serious2 --- Moderate

1 --- Slight0 --- Minimal

AFFIX TO ALL PORTABLE CONTAINERS USED BY COMMERCIAL CUSTOMERS

THIS LP TANK IS EQUIPPEDWITH A SAFETY RELIEF VALVE.

DO NOT PLACE INSIDE ANYENCLOSED OR HEATED AREA

-- Extremely Flammable Gas-- Heavier than Air-- Simple Asphyxiant-- Odorized to warn of its presence-- Contact with Liquid will cause Freezing of Tissue-- P.E.L. 1000 PPM-- Store container outside and keep cool (under 1300F)-- Turn o� container valve when not in use

PERSONAL PROTECTION

LIQUIFIEDPETROLEUM

GASUN 1075

FLAMMABLEGAS

2

CYL 3 in 1DOT

Duty to WarnOSHA

4.75” x 6.5” Vinyl

010203

010203

010203

010203

010203

010203

010203

010203

QTR. 1

5-V88-1

040506

040506

040506

040506

040506

040506

040506

040506

QTR. 2

5-V88-2

070809

070809

070809

070809

070809

070809

070809

070809

QTR. 3

5-V88-3

101112

101112

101112

101112

101112

101112

101112

101112

QTR. 4

5-V88-4

5-V88-1

5-V88-3

5-V88-2

5-V88-4

CAUTION

This container is NOTequipped with an OPD(over�lling prevention device)

V-128NO OPD Sticker

Use for cylinders thatcannot be upgrade tothe new OPD valve

4.75” x 4” Vinyl

This tank has beenvisually reinspected in accordance

with 49 CFR 180.209(g)

Visual Requali�erIdenti�cation Number

Date/TypeVisual Inspection/04 E

5-C86

Your RINpreprinted here

Peel & stickmonth here

C-583” x 1.875” Vinyl

Cylinder Requalification Stickers

90

N O T I C EAUTHORIZED PERSONNEL

ONLY

S1317VAuthorized Personnel

10” X 14” Steel

Plant Signs

CAUTIONBURIEDGASLINE

EMERGENCYSHUTOFF VALVEPULL TO CLOSE

LIQUIDLIQUIDLIQUIDLIQUIDLIQUID

VAPORVAPORVAPORVAPORVAPOR

P-81 10” x 12” Poly

P-148 12” x 12” Poly P-149 12” x 12” Poly

LP-1 4” x 5”Yellow Flag21” Wire StaffMarks Existing Lines

LP-5 4” x 5”White Flag21” Wire StaffMarks Proposed Lines

V-90-5 Five Ea1” x 4” Vinyl

V-91-5 Five Ea1” x 4” Vinyl

140

HZ-704-1 7.5” X 7.5” VinylHZ-704-3 15” X 15” Vinyl

FLAMMABLEV-24BB 4” X 22” Vinyl

LIQUEFIED PETROLEUM GAS

V-302BB 4” X 36” Vinyl

NO SMOKING916D 2” Letters Vinyl (3” X 14”)916D-3 3” Letters Vinyl 4” X 22”)

PROPANE155-71D 2” Letters Vinyl (3” X 12”)155-714D 4” Letters Vinyl (5” X 18”)155-716D 6” Letters Vinyl (6.75” X 27”)

DANGERN O S M O K I N GM AT C H E S O RO P E N L I G H T S

NO TRESPASSING

157 10” X 14” Steel157D 10” X 14” Vinyl201 14” X 20” Steel

949 4” X 24” Steel

EMERGENCYSHUTOFF VALVEPUSH TO CLOSE

P-82 10” x 12” Poly

C A U T I O N- SHUT OFF -

ENGINE BEFOREREFUELING

2929-9 20GAShut Off Engine14” X 20” Steel

PROPANE-CONTAINERLIQUID VALVE

EMERGENCY SHUTOFFPULL TO CLOSE

PROPANE-CONTAINERLIQUID VALVE

EMERGENCY SHUTOFFPUSH TO CLOSE

STOPT A N K C A RCONNECTED

945BTank Car Sign

11” X 17” Steel(Shown with

accessory rail sign post)

91

Reels

Hannay Hose ReelsHannay LP-Gas hose reels are of heavy duty construction and are de-signed for operating pressures of 1,000 PSI. Complete units are built to order from individual components matched to the hose capacity, piping size, mounting arrangement and rewind direction required.Many different configurations are available to suit individual needs. The most common arrangement with top right rewind, 12v DC explosion proof motor, manual rewind and 1-1/2” connections is shown.

Add convenience and ease of hose handling with the FH3 roller and spool assembly. Especially helpful for odd angle hose reeling.

For the ultimate ease in hose handling, use the Guide-master hose guide.

Typical EPBHose Reel

Common Models and Dimensions

FH3 Roller & Spool Assembly Guidemaster

FH3Shown with top wind brackets

GuidematerShown with bottom wind brackets

A D

F

F

ReelModelNumber

1” I.D. HoseCapacity

(Feet)

Reel Dimensions (inches)

A B C D E F G Ship Wt. (lbs.)

EPB24-23-24 125 21 15.5 10.5 20.5 22.75 29.25 23.5 144

EPB30-23-24 150 27.5 22 10.5 20.5 22.75 33.75 23.5 157

EPB24-25-26 150 21 21 10.5 25.5 24.75 29.25 27.88 152

B E

C

92

Reels

Common Replacement Parts

12v DC XP Motors

Brake/RewindAssembly

Motor Sprockets

Chain

9915.0003 1/2 HP 650 RPM9915.0009 2/3 HP 500 RPM

9914.0200

9910.1117 #35 chain 11 tooth 1-11/16” long9910.0917 #40 chain 9 tooth 1-5/16” long

9912.0001 #35 chain 10 ft. long9912.0002 #40 chain 10 ft. long

Front Bearing 1-1/2”

Back Bearing 1”

Bevel Gears9914.0372 Ring Gear9914..0394 Pinion Gear

H-150G Riser Gasket

Chain Pitch Size

ChainPitch

A Roller Width

B Link Spacing

#35 27.5 22

#40 21 21

AB

XP SwitchEPS-1

Rectangular SwitchEXPB-2A

Junction BoxJBC

12v Solenoid9917.0025

Circuit Breaker9917.0021 50 Amp9917.0027 70 AmpSwitch Bracket

ESH-2A

93

Chiksan Swivel Joints

ChiksanPackingFor Swivel Joints

Chiksan swivel joints are high performance malleable iron units for 1,000 PSI service. All swivels are equipped with -175OF “AD” stainless steel, spring loaded teflon packing.Unsurpassed for long, leak-free service under the extreme temperature conditions experienced in liquid propane service.Stock Sizes:3/4” thru 2” FNPT

#7 Grease14-1/2 oz tube-50 - 212 OF

“AD” Packing Sets3178521 3/4” - 1”3178528 1-1/4” - 1-1/2”3178535 2”

Ball Bearing Sets1/4-40 3/4” - 1”1/4-54 1-1/4” - 1-1/2”3/8-48 2”

“AD” Packing Set

NO. 7LUBRICANT

CHIKSAN

FH-3Roller and Spool Assembly

FH-3 Roller Length Indetification

FH-3 Roller Part Numbers

Roller NumberRoller Length

w/bushingsA (inches)

Mounting BoltsC to C

B (inches)

9940-010(specify length)

16 18.75

18 20.75

20.5 23.25

22.5 25.25

24.5 27.25

26.5 29.25

Key # Part Number Description

1 9940.0010 Roller Tubing (specify length)

2 9940.0009 Roller Rod (specify length)

3 9940.0008 Trunion Bearing

4 9940.0002 Black Cap (replaces obs. chrome cap)

5 9940.0012 Plastic-coated Step Bolt w/washers & Nut

6 9940.0005 Chrome Spool

7 9940.0006 Chrome Block

“A”“B”

FH3 Roller Identification

FH3 Roller Parts

1

2

3

4

5

6

7

Reels