FJ Mar 2015
-
Upload
craftsman-publishing-co-ltd -
Category
Documents
-
view
251 -
download
9
description
Transcript of FJ Mar 2015
furniturejou
rnal
march 2015
On the cover: FelderGroup’s Kappa 550with e-motion
Sourcing andpackaging by SPL
The latest in decorativesurfaces
Saws with more
Made in Britain: insideDustraction
00 Cover March 2015.qxd 16/2/15 2:17 pm Page 1
The market leading producer of high gloss and speciality foils
High Quality Surface Finish
Very High Gloss Levels
Excellent Scratch and Chemical Resistance
High UV Resistance and Colour Stability
Available from next day delivery
New ranges of Neutrals and Greys now in UK stock, including
Cashmere • Dakar • Mussel • Light Grey
New Satin grades now in stock for painted effect doors
Distributed and stocked in the UK by
For a swatch booklet featuring our UK stocked range and to discuss supply options, contact Plasfilms
Telephone 01530 560 560 or email [email protected]
working in partnership with Bonlex and C I Kasei
00 Plasfilms Ad (IFC).qxd 16/2/15 2:14 pm Page 2
march 2015
Please note: points of view expressed in articlesby contributing writers and in advertisementsincluded in Furniture Journal do not necessarilyrepresent those of the publishers. While every
effort is made to ensure the accuracy ofinformation contained in Furniture Journal, no
legal responsibility will be accepted by thepublishers for incidents arising from use of
information published. All rights, including moralrights, reserved.
COPYRIGHT: No part of this publicationmay be reproduced, stored in a retrievalsystem, or transmitted in any form or by
any means without the prior writtenconsent of the publishers.Copyright CPC Ltd, 2015.
ISSN 13653-8969
Readers should note that a charge may have beenmade by the publishers to cover the cost of
reproducing some colour photographs in this publication.
origination: CPC Ltd
printing: Breckland Print
published by: Craftsman Publishing Company Ltd,
Napier House, 11 Surrey St, Lowestoft,
Suffolk, NR32 1LJ, United Kingdom
www.craftsmanpublishing.co.uk
editor: Melvyn Earleemail: [email protected]
publication manager: Paul Brayemail: [email protected] design: James Crisp
email: [email protected] manager: Jennifer Sims
email: [email protected]: Jennifer Sims
email: [email protected]: 01502 517115Fax: 01502 517117
www.furniturejournal.co.uk
cover photo
Felder Group’s Format 4 Kappa 550 EMotion Panel Saw, their 30,000 machine!
More information on page 36.
contents2 OBESITY AND EU LAWAbigail Halcarz explains theconsequences of the EU’s recentruling on obesity and why allemployers need to take care whendismissing those who can no longerperform their jobs because of it.
4 COMPONENTS ON DEMANDSave time, save money, reduce stock-holding and make life easier byoutsourcing your component.
8 SIX SUPER SATINSBonlex has expanded its range toinclude new prints, new unicoloursand a new range of tactile satins, nowin stock.
10 ON THE BALLHornschuch is right on the ball withits latest metallic and Nordic influencedécor finishes.
12 ALL THAT GLITTERSWorth its weight in gold forrefurbishment projects: self adhesiveInterior Film from David Clouting.
14 SMART MOVESSchattdecor’s new innovation,Smartfoil EVO, will be launchedofficially in early March with acollection of new décor designs.
16 EGGER - IN DEPTHRising demand from furnituremanufacturers for highly realistic anddeeply textured MFC panels has ledEgger to invest in additional productionfacilities at its Northumberland site.
19 ANCIENT AND MODERNCopper tones from the 70s havemade a comeback alongsidenanotechnology for a soft feel.Ostermann has matching edges.
20 REVIEW: LONDON’SSURFACE DESIGN SHOWSmall, compact and easily covered inhalf a day, the Surface Design Show isno competitor for the décor halls ofInterzum but there are usually a fewgems to be found.
22 PRINTED RUSTICPrinting on triple-layered veneeredpanels or solid Spruce from Sun-Woodprovides the distressed look and feel -without the worms.
25 FINSA ON SHOWFive new product groups on the Finsastand at the Surface Design Show.
28 NEW LIGHTWEIGHTA new lightweight board makes its UKdebut at the Surface Design Show.
29 IN GREAT FORMHI-MACS® made a big impact at thisyear’s Surface Design Show. Theexclusive UK distributor, JamesLatham, featured the popular acrylicsolid surface material on their stand.
31 SERVICE FIRSTWhen Tony Morris established TMServices, service was the only thing heoffered. Machine sales came later -but the priority has never changed.
35 MORE FROM YOUR SAWA saw carriage with independentraising of the main and scoring sawblades is now available on the SCMSigma Prima Beam Saw.
36 A (NEW) MILESTONEFelder celebrates the handover of the30,000th woodworking machine.
39 SUPER SHARPENERVollmer has launched a new line ofgrinding centres for grinding and polishing most tooth geometries in asingle pass.
40 INSIDE STORYEmploying a new concept based on thepatented Vector principle, the VectorRevolution 180 operates in much thesame way as a typical throughfeededgebander - at peak efficiency butaround almost any contour.
42 A SPARK OF GENIUSTraditional engineering, chemistry,acoustics, ornithology - they’ve allplayed a part in the inventions whichhave given Dustraction a place in auniquely British engineering heritage.
01 Contents Mar 2015.qxd 18/2/15 9:56 am Page 1
2 • FURNITURE JOURNAL MARCH 2015
When 25-stone child-minder,Karsten Kaltoft was dismissedby his employers, the
Municipality of Billund in Denmark, forbeing unable to tie the laces of thechildren he cared for without acolleague’s help, few could havepredicted the likely consequences for UKemployers. Solicitor Abigail Halcarz ofcommercial law firm SGH Martineauexplains: “When his employment wasterminated after 15 years of service, MrKaltoft was considered severely obese,with a BMI of 54 (according to the WorldHealth Organisation, any individual witha BMI in excess of 40 is severely ormorbidly obese). Mr Kaltoft claimed hisdismissal was because he was obese,which meant the Court of Justice of theEuropean Union (ECJ) ultimately had toconsider whether a general prohibitionexists in EU law on all forms ofdiscrimination, including obesity, orwhether obesity should be classified as adisability within the scope of the EqualTreatment Framework Directive.
“The ECJ held that while there isgenerally no law prohibitingdiscrimination on the grounds ofobesity, there are certain circumstanceswhen it could amount to a disability.National courts will now decide
whether an individual’s obesityconstitutes a disability.
“Obesity in itself is insufficient to be adisability, but could potentially satisfy thedefinition of disability under the EqualityAct 2010, if the condition is severeenough. If severely obese employeessuffer problems with mobility, enduranceand mood, it could amount to disabilityand affect how employers manage theirworkforce.
“Circumstances under which anobese employee may be considered asdisabled, include; someone with type 2diabetes who is regularly absent as aresult of the condition; someone whosuffers from depression as a result of theirweight; or someone whose obesitycauses severe mobility issues (e.g. uses awheelchair and finds it difficult to usepublic transport).
“The duties under the Equality Act2010 in respect of people who areclassed as ‘disabled’ will apply not only todisabled employees, but job applicantstoo. As such it is unlawful for anemployer to discriminate against anindividual; treat an individualunfavourably because of somethingarising from disability, without objectivejustification; discriminate indirectly byapplying a provision, criterion or practice
that disadvantages any individual with adisability, without objective justification;fail to comply with its duty to makereasonable adjustments where a disabledindividual is placed at a substantialdisadvantage; subject an individual toharassment related to disability; victimisean individual because they have made orintend to make a disability discriminationcomplaint; or ask job applicants pre-employment health questions other thanfor a prescribed reason. The prescribedreasons are set out in the legislation.
“If nothing else, this casedemonstrates the need for employers toregularly review their equal opportunitiesand sickness absence policies, ensuringthey cover all disability discriminationissues, including obesity. I wouldrecommend employers also reviewtraining for managers dealing withsickness absence and issues that mightarise from obesity, to ensure theyunderstand the current legal position andhow it now applies in the workplace.
“If an employer dismisses anemployee because of any physicalattribute, then the chances are it is unfairand potentially discriminatory, unless itaffects the individual’s ability to do theirjob and no reasonable adjustments canbe made to improve the situation.”
Abigail Halcarz explainsthe consequences of the
EU’s recent ruling onobesity and why all
employers need to takecare when dismissing
those who can no longerperform their jobs
because of it.
Abigail Halcarz is an employment solicitorin the Commercial Group at UK top 100
law firm SGH Martineau LLP.
oobbeessiittyyaanndd eeuu llaaww
02 Legal Article.qxd 16/2/15 2:22 pm Page 2
www.exposicam.itExposicam srl
PORDENONE FAIR
13th/16th
October 2015
INTERNATIONALEXHIBITION OF COMPONENTS,SEMIFINISHEDPRODUCTS AND ACCESSORIESFOR THE FURNITURE INDUSTRY
4 • FURNITURE JOURNAL MARCH 2015
ccoommppoonneenn
04-06 Sycamore (SPL).qxd 16/2/15 2:27 pm Page 2
Everyone wants to save money, cutcosts, ease the burden on cashflowand use time wisely but not
everyone knows the secret. Not thatit’s really a secret any more - at leastnot to many of the UK’s biggest andbest-known furniture manufacturingcompanies. Shrewd and establishedmanufacturers from the kitchen, officeand upholstery sectors have known fora good many years that by entrustingLeeds-based SPL Components Ltd(formerly known as SycamoreProducts) with the time-consumingbusiness of sourcing everything frombrackets and hinges to screws anddrawer boxes - like the job of ensuringjust the right number of components ispackaged for the end user - they cansave time, save money and make life agood deal easier for themselves. And
because SPL also maintains stocks forthem and supplies on an “as required”basis, their cashflow benefits, too.
“Nowadays, people don’t want to bebuying 20 items from half a dozensuppliers,” explains SPL’s ManagingDirector, Gary Baxter, whose experienceof sourcing and packaging componentsfor manufacturers dates back to theearly nineties. “It takes time to sourceeverything you need from a bracket to apiece of glass. That’s what we do - andwe can supply and package anythingthat goes into a cabinet except thechipboard.”
Fifteen years ago, customer demanddrove the company into sourcing screwsand providing a packaging service. “Wehad 30 out-workers,” recalls Gary. Butwith rising demand it wasn’t long beforethe company acquired its first packaging
Save time, save money, reduce stock-holding and make life easier by
outsourcing your component requirements and having the exact
quantities you need packaged and delivered just when you need them.
FURNITURE JOURNAL MARCH 2015 • 5
oonn demand
Leeds-based SPL Components Ltd has grown outof its single height 9,000 square foot warehouseinto new 22,500 square foot highline premises bygiving larger manufacturers exactly what theyneed when they need it.
eennttss --
04-06 Sycamore (SPL).qxd 16/2/15 2:28 pm Page 3
machine. “To begin with, we weresupplying the kitchen manufacturingsector. When the recession hit, webegan to approach the office sector andmore recently we’ve started sourcingbespoke products for larger upholsterymanufacturers.”
With rising demand, Gary and histeam decided to invest. First came amove from the company’s original low-build premises of 9,000 square feet to ahigh line warehouse of 12,500 squarefeet. Just six months later, SPL hadoutgrown its new premises and theadjoining 10,000 square foot warehousewas acquired. Most recently, a new andhighly advanced packaging machine(capable of collating and packing up to20 individual, automatically countedcomponents into a sealed plastic bag)has added a further £300,000 ofinvestment to the business - and thenew machine is already busy.
“Business has grown by 45% in thelast year,” says Gary. “We’ve grownthrough diversification and have a newcatalogue coming out shortly whichincludes handles, drawers, aluminiumextrusions - anything that goes into akitchen. It contains about 80% of whatwe do. We also source a lot of bespokeproduct from curved glass to bracketry,casters, specialised feet - basicallyanything our customers need. If one ofour customers needs a special bracket,we’ll have it made by one of oursuppliers, stock it for them and supply itin the boxed quantities they want. It
makes life easier for them - and theybenefit from the economies of scale weare able to offer through our bulkbuying programme.”
Gary admits candidly that SPL is not astrictly a developer of products, thoughit has sourced many exclusive productsmade for customers who have veryspecific requirements. The companyoccupies a very clearly defined position:it’s an importer and a distributor. “Tellus what you want and we’ll provide it,”he says. “We’ll find the products for you,we’ll package them with your companyname or the name of your customer, abarcode, or whatever is required andwe’ll deliver them to your schedule.We’re sourcing continually,” he adds,“Which means what may not have beencompetitive last year could be this.”
Eighty-five per cent of the productssourced by SPL are imported, most invast quantities, so worthwhile cost-savings can be passed to you. SPL hasalready proved to big name kitchenmanufacturers that it offers tangibleadvantages. Now, with warehousespace to spare and the right contacts inplace to expand its horizons evenfurther, the SPL team has set its sightson proving to the larger office andupholstery manufacturers that it candeliver on its promise to them as well.
If you’d like to find out how SPL canhelp you save time, save money, reduceyour stock-holding and make your lifeeasier, call 0113 271 3200 or visit thewebsite www.splcomponentsltd.co.uk
6 • FURNITURE JOURNAL MARCH 2015
Above. First impressions count.
Right. A new £300,000 machine means SPL can packageup to 20 individual components in a sealed plastic bag.
Below. All manner of components can be stored, baggedand dispatched to order.
04-06 Sycamore (SPL).qxd 16/2/15 2:28 pm Page 4
Document1 12/2/15 9:39 am Page 1
With tactile qualities so high onthe consumer agenda - andin particular, natural-feeling,
soft-touch surfaces - it will come as nosurprise to learn that the style andtechnical gurus at Bonlex (the décorspecialist from the giant C I KaseiGroup) are right up there at thecutting edge of the trend with a rangethat includes six beautiful new satins.The softly-embossed range of satinunicolours includes White, Cream,Light Grey, Cashmere, Mussel and asophisticated Black Satin - all shown inthe main background image. All sixdécors are either 0.3mm or 0.35mmPVC and all are now available throughPlasfilms from stock.
When producing satin materials,Bonlex uses the same gloss base as withits gloss foils but then adds a satin topcoat. This enhances the colour depth inthe product whilst providing high levelsof scratch and chemical resistance.
Catering for the burgeoning highgloss market, Bonlex recently launchedfour new high gloss neutrals. LikeBonlex satins, the gloss décors start ashigh gloss products. The addition of atop coat increases the depth as well asproviding scratch and chemicalresistancy to very high levels. Colourconsistency is also exceptionally good.Shown top right are Cashmere, Mussel,Dakar and Congo - just part of a muchmore expansive range that nowincludes no fewer than seven Greys,some of which incorporate subtle hintsof blue. Shown bottom right are StoneGrey High Gloss, Light Grey High Glossand Otranto Grey High Gloss. FlintGrey, Dark Grey, Jupiter Grey andLucido Grey are also available. These aresupplemented by two co-ordinatingLarch print designs, Snow Larch andBerlino Larch, also shown right.
Call Plasfilms on 01530 560560 oremail chris.green@plasfilms co.uk
Bonlex has an enviable
reputation for its high
gloss décors and its range
has expanded in recent
times to include new
prints and new unicolours
- but now there’s also a
new range of tactile
satins which is available
from stock in the UK.
8 • FURNITURE JOURNAL MARCH 2015
six supe
Back
grou
nd:t
he n
ew S
atin
s.
08-09 Plasfilms DPS.qxd 16/2/15 2:40 pm Page 2
FURNITURE JOURNAL MARCH 2015 • 9
per satins
Supreme gloss levels in soft, on-trend neutral tones.
The Greys: soft, neutral and some with just a hint of blue.Snow Larch and Berlino Larch.
08-09 Plasfilms DPS.qxd 16/2/15 2:40 pm Page 3
Hornschuch is right on the ballwith its latest metallic and
Nordic influence décor finishes.
Right. This beech issimply different.skai® Iconic isenchanting with itslively design, itsdetail and itsdelicacy. Theexciting mixtureof wood pore andrustic elements likeknots and simulatedflowers are characteristic
of this design. Embossingcompletes the impression with a
velvety feel.
AboveandRight.Nordic bynature, skai®Ida (right) andskai® Ida Magnolia(above) are elmswith a very differentcharacter. This woodis a typicalrepresentative of theNordic style: cool,clear and quiet as afjord. Its subduedrustic look makesthe design veryelegant.
With its pioneerspirit and powerful
expression, thefurniture film skai® Nelson
is an expressive interpretation of elm.As decisively as Nelson once circled the globe, theplanked design demonstrates its unique structure:With a white-grey negative pore, its colours rangefrom gold-bronze with hints of brown to white-grey.
The skai® colore magic structurewith Quadro embossing has many
characteristics of coniferous wood andcan therefore be perfectly combined with
skai® Nelson and skai® Ida. The new metallictones are right on the ball. Due to their particularly
deep structure, which is similar to a sandblasted surfacewith sharp edges and grooves, and unique colour, theseplain colours look particularly impressive.
Plain colour furniture films give an impression of finesseand high-quality, especially with the amazingly natural oak
embossing Legno. The pores modulate and move, sometimesappearing deep, sometimes shallow. This new embossing looks
like a solid oak front with multiple layers of varnish and isavailable in seven colours in the skai® colore structure collection.
Shown above is Steel Grey. Left is Copper brown and in thebackground is Nightblue.
For more information visit Interzum from May 5-8, 2015 (Hall 6.1, StandE040), call 01327 877646, email: [email protected] , or visit the website
www.m-f-s.co.uk
oonn tthhee bbaallll
10 • FURNITURE JOURNAL MARCH 2015
10 Hornschuch.qxd 16/2/15 2:03 PM Page 2
YOUR INVITA
TION
FEATURING - All the latest woodworking products and technologies in our 25,000 sq.ft showrooms.
NOT TO BE MISSED!
NEY LtdStonebridge Trading Estate
Sibree RoadCoventryCV3 4FD
T: 024 7630 8100F: 024 7630 8101 [email protected]
Slap bang in the middle of the country easily
accessible by all major travel links.
(For directions see www.ney.co.uk/contact)
NEY SPRING 2015 IN-HOUSE
EXHIBITION21st - 23rd April
www.ney.co.uk/exhibitions
Delicious hot & cold buffet served all day.
good FOOD
Metallic effects certainly formpart of the David CloutingInterior Film range but with
more than 70 colours/décors in stockand 300+ available, all that glitters isdefinitely not limited to gold. But forthose looking to refurbish interiors orfurniture, it’s certainly worth its weightin gold.
Including stones, woods, leathers,metals and decorative designs, DavidClouting’s self-adhesive decorativeInterior Film range allows designers tometaphorically chuck out the chintzwhilst being able to recycle existingfurniture and fittings. Versatile andsimple to use, it can be applied tovirtually any substrate to bring freshappeal to tired walls, doors, furniture,skirting or architraves. The self adhesive
backing offers a strong bond to wood,melamine and polyester coatedlaminates, plastic, steel, aluminium,mortar, limestone, gypsum and otherkinds of board.
Aside from being self-extinguishingwhen tested for flammability, InteriorFilm is durable and offers highresistance to impact, abrasion andscratching. Its inherent stability and“zero shrinkage ratio” make it ideal forapplications where it will be exposedto heat, humidity or low temperature.And it’s a dream to apply, wrappingaround complex shapes and curvedareas with ease - and no air bubbles.
For more information, or to discussthe suitability of Interior Film for one ofyour projects, call 01376 518037 orvisit www.davidclouting.co.uk
David Clouting’s self
adhesive Interior Film
range includes metal,
stone, leather and
fantasy décors - and for
shopfitting, refurbishment
projects and interiors it’s
worth its weight in gold.
12 • FURNITURE JOURNAL MARCH 2015
all that
Main background image. Lightgold brushed effect.
This image. The leather look - a graincorrected hide in an Interior Film.
Right. Sapwood décor.
Below. Skillfully combined InteriorFilms create stunning interior designs.
12-13 Clouting DPS.qxd 16/2/15 2:56 pm Page 2
FURNITURE JOURNAL MARCH 2015 • 13
glitters...Below. Small scale planks, concrete andpure fantasy designs are all included in the300+ décors available in the Interior Filmrange from David Clouting.
12-13 Clouting DPS.qxd 16/2/15 2:56 pm Page 3
Not a single tree has to be felled to obtain furniture with an authenticwood appearance,” says Klaus Müller, Schattdecor’s Foil SalesManager, referring to the décor specialist’s new Smartfoil EVO. The
EBC-lacquered décor set new standards for look and feel in the foil sector when itmade its debut at Sicam last October. ”The look is very attractive and hard todistinguish from veneer,” continues Klaus. “We have significantly improvedphysico-chemical surface resistances. Smartfoil EVO offers a marked improvementin mechanical properties as well as optimised fluid resistance.”
Produced on a 2750mm wide line code-named PMD 42 in Schattdecor’sPolish plant in Tarnowo Podgórne, Smartfoil EVO’s unique properties are theresult of printing and applying two coats of lacquer in an inline process whichcreates a texture that synchronises perfectly with the printed pattern. Pore
structures are further enhanced with gloss levels that vary from matt to high gloss. After a phase that favoured rustic textures, trends are moving in the direction
of subtlety, finesse and authenticity. Sonoma Oak embraces robust visual effects,whereas the new Livorno Beech décor that saw its debut at Sicam stands for anew generation of subtle woodgrain décors characterised by understated andnatural details. Columbia Walnut, a dark woodgrain (pictured with Klaus Müller),is the décor Schattdecor has chosen to usher in its Smartfoil EVO product.
Schattdecor is able to produce Smartfoil EVO in gloss levels ranging fromsuper matt to high gloss and is now concentrating its efforts on ultra-matt
and electron beam-cured gloss/matt combinations with “anti-fingerprint”characteristics. To find out more about Smartfoil EVO visit Schattdecor’swebsite at www.schattdecor.de
14 • FURNITURE JOURNAL MARCH 2015
ssmmaarrtt mm
Foil Sales Manager Klaus Müller with Columbia Walnut in the
Smartfoil EVO finish.
“
14-15 Schattdecor DPS.qxd 16/2/15 3:10 pm Page 2
Schattdecor’s new
innovation, Smartfoil
EVO, first seen at Sicam
in October 2014, will be
launched officially in early
March with a collection
of new décor designs
unveiled in Bünde.
mmoovveess
The story of Smartfoil EVO’s development dates back to 2009, whenSchattdecor started aligning its development efforts to marketdemands for foil solutions offering high quality surface finishes.Schattdecor’s technologists wanted to create a texture whichsynchronised with the print pattern and gloss/matt effects. This led to abreak with the past approach and consideration of a combination unit,with electron beam technology ultimately proving to be the route. InJune 2010 an investment decision was made, resulting in theinstallation of the PMD 42 inline printing and topcoating line inPoland. The unit entered operation in stages, starting with the printingelement in 2012. The electron beam (EB) component was installed inmid-2013 and work was stepped up on determining specific lacquerparameters. From the very start the technology was designed with theconception of a foil with the characteristics of the later Smartfoil EVO inmind. The end result may be seen in Columbia Walnut, the first décorto be produced in this new surface effect foil. The PMD 42 has anannual capacity of over 50 million square metres, ensuring plentifulsupply for Schattdecor clients.
The new foil can be processed like any other Schattdecor foil andlends itself to Completeline technology where surfaces and edges areprocessed in a single operation.
FURNITURE JOURNAL MARCH 2015 • 15
14-15 Schattdecor DPS.qxd 16/2/15 3:10 pm Page 3
Following the successful introductionof Egger’s ST27, the line at theHexham factory has started
production of the latest generationST28 synchronised pore décor.Advanced surface technology whichaligns the print with the texture tocreate a registered finish accentuatesthe knots and planking in designs likeGladstone Oak to impart a natural feelreminiscent of solid wood.
Three finishes are available: H3309ST28 Sand Gladstone Oak, H3326Grey-Beige Gladstone Oak and H3325ST28 Tobacco Gladstone Oak. As wellas being available from stock in 18mmdouble-sided board, all are nowavailable with the ST15 décor on thereverse. ST28 supplements the earlierintroduction of Egger’s ST27 décor,which is available in two woodgrains,H1796 ST27 Natural Tortona andH1793 ST27 Lava Tortona. Thesesynchronised décors are in addition to
ST29, which is currently produced atEgger’s sister plants and stocked in theUK as 18mm double-sided board.
“The trend towards ultra-realisticrustic wood-grains that has been soevident in recent years - particularly inpremium German and Italian kitchens -shows no sign of going away any timesoon,” commented Egger UK’s head ofdécor development, Elliott Fairlie. “Thisauthentic design, with its double paperlayer and highly realistic gloss levels,creates a depth and realism previouslyonly available with a veneer or solidtimber.
“The decision to invest in additionalproduction capability for this range inthe UK, means our customers canexpect shorter lead times, moreflexibility on sizes and smaller minimumorder quantities.”
For more information on ST28contact Egger on 01434 602191 orvisit www.egger.com
Rising demand from
furniture manufacturers
for highly realistic and
deeply textured MFC
panels has led Egger to
invest in additional
production facilities at its
Northumberland site.
16 • FURNITURE JOURNAL MARCH 2015
eeggggeerr --
H3225 ST28 Tobacco Gladstone Oak
Background: H3326 ST28 Grey-beigeGladstone Oak
16-17 Egger DPS.qxd 16/2/15 3:17 pm Page 2
FURNITURE JOURNAL MARCH 2015 • 17
iinn ddeepptthh
H3309 ST28 Sand Gladstone Oak
16-17 Egger DPS.qxd 16/2/15 3:17 pm Page 3
Perfect Service – for everything edging
Edgings available upon requestas laser compatible edgings
in just 5 working days
Edgings in ABS, Melamine, 3D acrylic, Aluminium,
Real wood veneer
Edgings in various thicknesses
Edgings in every width up to 104 mm
2 % discount on every online order
(Shop and App)2%
Europe‘s largest edging range
The largest Cross-Reference-List in Europe with over 120,000 matches
Edgings pre-glued with hotmelt adhesive upon request
Edgings from 1 metre 1 m
Edgings with Airtec coating upon request in just
5 working days
All orders placed before 4.00pm are delivered within 24 hours 24 h
United KingdomPhone: 01905 793 550 · Fax: 01905 793 [email protected] · www.ostermann.eu
IrelandPhone: 0044 1905 793 552 · Fax: 0044 1905 793 559
[email protected] · www.ostermann.eu
5 - 8 May 2015Interzum 2015Cologne, GermanyHall 05.1, Stand A-061
Ostm_Anz_PerfectService_210x297_FurnJourn_GB_G039.indd 1 03.02.15 11:45
FURNITURE JOURNAL MARCH 2015 • 19
Copper colours - and thecomforting and appealing way inwhich they reflect light - bring a
very special glow to modern livingspaces and copper works perfectly withpractically every other material andcolour. Contrast with cool, high-glosswhite or black, or blend with warmbeige or grey, combine with glass orleather surfaces, copper is extremelyversatile as a design element.Ostermann currently has a smooth-brushed copper 3D acrylic edging (23 x2mm) and four different copper-coloured ABS edgings in stock. Bronze,Copper Metallic and Quartz Copper ABSedgings with embossed minipearl are
available in different widths and sizes.There’s even a Copper Metallic high-gloss ABS edging and coming soon willbe an ABS edging with a copper-coloured solid aluminium finish.
Ostermann is also offering the verylatest edgebands to match surfacesfrom the Arpa Fenix NTM® range. Byrefining the use of nanotechnology,Arpa’s surfaces have a special softtouch with anti-bacterial and anti-fingerprint properties. Ostermanndoesn’t employ nanotechnology - butit does supply matches in 23, 33, 43and 100 or 104 x 1mm.
For more information call OstermannUK on 01905 793550.
aanncciieenntt aanndd mmooddeerrnnCopper tones from the 70s have made a comeback alongside
nanotechnology for a soft feel. Ostermann has matching edges.
19 Ostermann.qxd 16/2/15 3:29 pm Page 1
20 • FURNITURE JOURNAL MARCH 2015
ssuurrffaaccee
20-22 Surf Des Show Review.qxd 16/2/15 3:43 pm Page 2
Now in its 11th year, the SurfaceDesign Show took place in theLondon Business Design Centre
from 10th to 12th February. Over 130exhibitors showcased products.Although essentially a show targettedat architects, designers and specifiers,the Surface Design Show provides aspotlight for new and novel surfacesfrom bold, architectural statements tothe latest sustainable designs. Whilst itis no Interzum - neither in size nor inthe spread of product on show - thereare usually a few surprises to be foundwhich deserve attention from thefurniture manufacturing sector.
The advent of chunky furnituredesigns has seen increased demand forlightweight panels. 3A Composites
showed its latest, an aluminium-faced,polyurethane board that weighs just1.9kg per square metre.
On the decorative side, productsranged from the immensely practicalHi-Macs solid surfacing material on theLatham stand and a range of décorsfrom the Portuguese company Finsa,to solid Spruce that had been printedto look like oak and panels withprinted woodworm from Sun-Wood.Among the more unusual décors wereFrench-made Pure Paper and PureMetal HPLs from Blackheath, a rangeof veneers from Mundy whichincluded a very tactile Silver Birch(above) and a light-transmitting man-made veneer from Anglo Eden Frenchcalled Radiant. More details follow...
Small, compact and
easily covered in half a
day, the Surface Design
Show is no competitor
for the décor halls of
Interzum but there are
usually a few gems to
be found.
FURNITURE JOURNAL MARCH 2015 • 21
ee design show
Left. Radiant, a new veneer withfine lines of light-transmitting acrylic
from Anglo Eden French.
Above right. A new décor from Arnold Laver.
Right. Silver Birch from veneer specialists, Mundy Veneer.
20-22 Surf Des Show Review.qxd 16/2/15 3:43 pm Page 3
22 • FURNITURE JOURNAL MARCH 2015
Distributed in the UK by Decolan, Sun-Woodproducts are being offered in two formats: as panelproducts, which are produced in three veneer layers
which are subsequently printed to give the appearance ofan old, distressed timber; and as solid wood panels,manufactured by over-printing solid Spruce with adistressed and patinated oak design.
Sun-Wood, which has been working in this field forsome five years, offers a full range of veneers but used theSurface Design Show to highlight its triple-layered printeddécors, one of which was presented as a distressed pineand the other, as a worm-holed and well-worn timberwith a very tactile surface (see background image).
pprriinntteedd rruussttiiccPrinting on triple-layered veneered panels or
solid Spruce from Sun-Wood provides the
distressed look and feel - without the worms.
20-22 Surf Des Show Review.qxd 16/2/15 3:43 pm Page 4
Formative Impression.
Döllken edgebands offer the perfect symbiosis of optics and haptics.
Profound and striking surface structures in natural optics
The materials take on a new lively dimension
More than 20 different texture options with optimal decorative finish
Available for all edgeband materials and panel surfaces
Also available as crossgrains – the edgeband combination,
which carries the decoration and texture of the panel across
the long and transverse sides
Ideal for the modern surface trends such as saw-rough or crossgrains
Order sample edgebands at www.doellken-kv.com
SURTECO UK Ltd.Widow Hill Road, Burnley · Lancashire BB10 2TB · UKPhone: +44 (0)1282 686861 · Fax: +44 (0)1282 [email protected] · www.surteco.co.uk
Innovation powered by
The diverse texture optionsfrom Döllken.
Visit us at
interzum Köln – Hall 6 – Booth D50/E59
and
LIGNA Hannover – Hall 26 – Booth A27
Looking forward to seeing you!
E: [email protected] W: www.davidclouting.co.uk • David Clouting Ltd. Unit 650, The Hub, Skyline 120, Avenue West, Braintree, Essex CM77 7AA
deco foil 3D Forming Veneers for kitchen,bedroom and bathroom furnitureWe offer an exciting range of contemporary andtraditional styles, all with excellent board matches
call today forinformation on our product range
interiorsof imagination...brought to life
+44 (0)1376 518037
Find out more about our exciting range of
contemporary LG Hausys PVC foil materials for
kitchen, bedroom and bathroom
9649-CloutingAd-DecoFoil-FurnitureJnl.qxp_Layout 1 14/01/2015 15:30 Page 1
Finsa has had a busy year, firstshowing at the Architect@Workshow in January, then taking stand
space at the Surface Design Show withstands on a theme of Finsa’s Passportto the latest trends in décors.
“We are showing five main productgroups,” commented Eduardo Capelfrom the Surface Design Show stand.“Fibraplast Lucent is our melamine-faced MDF. We call it Lucent becauseof the high gloss coating. Lucent isavailable as a range of 15 décors,including woodgrains, and the qualityof the gloss means it is ideal for topend kitchens and bedrooms.” Thebreakthrough technology claims tohave incorporated into its manufactureprovides a high gloss surface which is
scratch and UV resistant, while thequality of the MDF makes for easymachining.
The second product Finsa showedwas SuperPan, an “industrial strength”décor with an in-register embossedmelamine oak surface called Jazz - thethird product. “We are showing fourshades of oak in Jazz,” commentedEduardo. “Jazz is available only onSuperPan board, not chipboard orMDF, because the properties of Jazzwork best with a really high gradesubstrate.” SuperPan combines thecost benefits of chipboard with thesmoothness of MDF by facing achipboard panel with MDF on bothsides before the decorative film isapplied.
Five product groups on
the Finsa stand at the
Surface Design Show.
FURNITURE JOURNAL MARCH 2015 • 25
finsa on show
Above. Finsa’s Passport to the World stand at the SurfaceDesign Show 2015.
Left. Ebano Luxury, one of the Fibraplast Lucent high glossdécors at the Surface Design Show.
Main picture. Jazz, Finsa’s embossed-in-register melamine.
Edua
rdo
Cap
el
25-26newNEW Finsa (SDS).qxd 18/2/15 10:43 am Page 1
26 • FURNITURE JOURNAL MARCH 2015
The fourth, and perhaps most unusualproduct, was Finsa’s black-dyed MDF,Fibracolour. Perhaps more squarely aimedat the shopfitting market, Fibracolour,shown left, requires no finishing, though itcan be lacquered and processed like anyother MDF.
With a density of around 1,000kg percubic metre, the fifth product to be shown aspart of the Finsa Forest display wasCompacmel, a high density woodenfibreboard which offers high bendingstrength, high impact resistance andelasticity. “It is perfect for high humidityenvironments,” added Eduardo.
For more information on Finsa products,or to discuss any of the product lines shownhere, call Finsa UK on 0151 651 2400.
Fibracolour, black-dyed MDF.
This picture. Fibraplast Lucent high gloss.
Right. SuperPan Décor options.
25-26newNEW Finsa (SDS).qxd 18/2/15 10:43 am Page 2
thedecorativepanelsgroup
YOUR PERFECT PARTNER
Download our app Scan for AndroidScan for Apple
26 colours from calming neutrals to dramatic colours from our dp-decor range. Matching edgebanding available for all colours.
Century House, Premier Way,Lowfields Business Park,Elland, West Yorkshire,HX5 9HF
T: +44 (0) 1484 658341 F: +44 (0) 1484 658812E: [email protected]
Contact us for more information.
bringinga worldof colourindoors
The trend towards chunky design,heavy-looking, solid-lookingfurniture designs has spawned a
whole new generation of lightweightpanels and associated fixings to dealwith internal honeycomb structuresand low-hold foamed panel interiors.With the latest contender from 3AComposites, it’s now possible to buy a15mm panel that can be cut like anyother with a centre of polyurethanethat, according to 3A Composites’sales team leader in the UK, SimonPhilpott, doesn’t demand the use ofspecial fixings.
Based in Germany, 3A CompositesGmbH injects polyurethane betweentwo aluminium skins on a throughfeedline to create a product which is called
Kappatec. Once the polyurethane hashardened, the roll is cut into panels.“Kappatec weighs just 1.9 kilos persquare metre compared with thetypical weight of 7-8 kilos for MDF,”says Simon. “No formaldehyde is usedin the manufacturing process and nopreparation of the product is necessarybefore laminating with a décorproduct because the aluminiumexterior is finished with a stoveenamel, making it ultra smooth.
“We have UK stocks of 1250 x2500mm as well as 1250 x 3050mmand a 1400mm width will be availablefrom March. We can supply either bulkpacked or boxed, as required.”
For a brochure or furtherinformation call 01942 876764.
A new lightweight
board makes its UK
debut at the Surface
Design Show.
28 • FURNITURE JOURNAL MARCH 2015
new lightweight
28-29 Surf Des Show DPS.qxd 16/2/15 4:57 pm Page 2
HI-MACS® made a big impact at this year’s Surface Design Show.
The exclusive UK distributor, James Latham, featured the popular
acrylic solid surface material on their stand.
HI-MACS® featured extensivelyon the stand with a series ofpanels highlighting the
versatility of the product. The materialcan be thermoformed as well asrouted and machined to almost any3D shape, offering virtually unlimitedpossibilities for personalised designs.
Examples included a panel in 6mmthick Alpine White HI-MACS® whichhad been thermoformed over pebblesand two vibrantly coloured panelswhich had been milled on the reverseof the sheet, pre-heated in athermoforming oven to 170 degreesCelsius and then vacuum-formed toproduce a seamless pattern on the faceof the panels.
Certain HI-MACS® colours and
thicknesses exhibit translucency whenexposed to light and various texturesand patterns can be built into thematerial to intensify the translucentappearance. Cut-out effects can addvisual interest with a new sense ofspace. There is a wide choice ofcolours on offer, with almost 100 inthe portfolio, supplied in thicknesses of6, 9 and 12mm.
LG Hausys, the manufacturers of HI-MACS®, have developed BIM Objects,which carry much more informationand are replacing CAD symbols, for itsfull range of HI-MACS® shapes andcolours for the following software:Sketchup, ArchiCAD and Revit.
Find out more by clicking onwww.himacs.co.uk
FURNITURE JOURNAL MARCH 2015 • 29
formin great
29NEW Surf Des Show.qxd 17/2/15 12:11 pm Page 1
1250 mm
/1530 mm
2500 mm /3090 mm
CNC Range from FORMAT-4:
Fine woodworking machinery from small business to large industry
Industrial Specification for Professional processing in the smallest of spaces.
profit H10 profit H20 profit H22 profit H50
CNC-NESTING TECHNOLOGY
profit H08
FORMAT-4 is a brand of the Felder Group and has a range of over 40 machines for large business and industryTel. 01908 635000Unit 2, Sovereign Business Park, Joplin CourtCrownhill, MK8 0JP MILTON KEYNESwww.format-4.co.uk
FORMAT-4 Quality and precision
from AUSTRIA
We all understand the need forit, we all offer it, we all relyon it, some hype it beyond
belief and have no clue how to deliverit but to Oadby-based TM Services,service was where everything started.
Back in 1984 when Tony Morrisfounded his fledgling company, his soleaim was to provide repair, maintenanceand installation facilities to users ofclassical woodworking machinery,edgebanders, rip saws, panel saws andsanders. As the reputation of TMServices grew, Tony’s workloadincreased and so did his workforce ofskilled service engineers. Matt Pearce,Tony’s right-hand man, takes up thestory: “I started when there was justTony and three others,” he says. “That
was 17 years ago. Last year we took onour eleventh engineer and we’vestarted training our own apprentices.Our focus is and always has been onservicing and installing machines.Machinery sales are secondary for us.They grew out of service.
“We were doing all the servicingand installation for Striebig, the Swissvertical panel saw manufacturer. Whenwe were offered the agency in 1997, itseemed a logical development for thebusiness and we decided to take it on.
”We started supplying AL-KO dustextraction with the Striebig saws weinstalled - they are very good quality,quiet, compact and reliable. We havebeen working with AL-KO for 15 yearsnow as their UK agent.
When Tony Morris established
TM Services, service was the
only thing he offered. Machine
sales came later - but the
priority has never changed.
FURNITURE JOURNAL MARCH 2015 • 31
There is no substitute for highly-trained engineers who knowmachines inside out. TM Services has 11 engineers on theroad, five back office support staff and apprentices workingfrom its premises in Oadby.
firstsseerrvviiccee
31-32 TM SERVICES.qxd 17/2/15 9:04 am Page 1
“Our other area of expertise waswide belt sanders. We started withJohanssen and eventually took onSandingmaster. We were the agents forSandingmaster until they started tofocus primarily on development for themetal grinding and polishing industryand for the far Eastern market, but westill service and maintainSandingmasters for UK customers.Then we were presented with anopportunity to work with Biesse whenthey bought Viet two years ago. Viet isvery focussed, like Striebig, and thequality of the machines is very high.Striebig, Alko and Viet are our offer.That’s not to say we wouldn’t takeother agencies if the machine was ofthe right quality and we had goodaccess to parts but we still see ourselvespredominantly as a service company.It’s what we do best. The service side ofour business has grown consistentlyand organically.”
As the service side continues togrow, TM has been busily upscaling
the support available through its backoffice. Five back office staff (plusapprentices) now support TM’s 11engineers - and with the increase inbusiness has come investment incomprehensive spares back up as wellas IT systems that enable instantaccess to customers’ service records.“The IT system provides instant accessto all the machines our customershave and an instant overview of thestatus of their service programmes,enabling us to provide appropriatepreventative, scheduled maintenanceas well as a complete history of eachmachine.”
Service first may sound like justanother cliché in an industry wheresome see after-sales service more as aselling tool than essential support but atTM it’s not. TM started out with service,has consistently prioritised thedevelopment of its support functionover machinery sales and has grown itscustomer base because of that. Put TMto the test yourself: call 0116 271 7155.
32 • FURNITURE JOURNAL MARCH 2015
Above. Matt Pearce shows a Striebig Compact in TM’sdemonstration area.
Below. TM Services took on the agency for Viet only afteramassing years of experience servicing wide belt sanders.
An enhanced stock of spares and a new IT system support
TM’s growing staff of engineers.
31-32 TM SERVICES.qxd 17/2/15 9:04 am Page 2
Swiss Precision
Italian Excellence
TMService
For sales and service contact exclusive distributor
T.M. Machinery Sales Ltd. t: 0116 271 7155e: sales@tmservices,co.uk w: www.tmmachinery.co.uk
33NEW TM Advert A4.qxd 17/2/15 12:54 pm Page 1
The future starts here.
Furniture productionInteriorsCologne
www.interzum.com
International Business Media Services Ltd.
42 Christchurch Road
Ringwood BH24 1DN
Tel. +44 1425 48 68 30
Fax +44 1425 48 68 31
From the big picture to the tiniest detail. All in one place.
Attention to detail makes all the difference – and your success
depends on it. At interzum, the world’s best suppliers in the
furniture industry and for interiors present their entire range of
products – from fittings, glass and lighting solutions through
surfaces, wood-based and natural materials to leather and
upholstery. As the leading industry event, interzum is the
doorway to the future. This is where the key players, trend-
setters and driving inspirational forces of the industry come
together. Get the competitive edge – and get inspired !
Save time and money by registering online and
buying your tickets at: www.interzum.com/tickets
World’sLeadingEvent
interzum05.–08.05.2015 New : Tuesday – Friday !
Quality from start to fi nish
RevolutionEvolution takes too longMirka’s trademark attention to detail has created
the MIRKA® DEROS, a machine packed with
groundbreaking features.
This includes a soft start function, a built in electronic motor
brake and a smooth, easy to operate lever to control motor
speed. A pad brake that also acts like a seal minimises the air
leakage and makes dust extraction more effi cient.
Discover: www.mirka.co.uk
34 INTERZUM MIRKA ADs.qxd 17/2/15 9:10 am Page 2
FURNITURE JOURNAL MARCH 2015 • 35
SCM’s entry level beam saw nowopens up new prospects for allpotential customers entering the
beam saw market for panel breakdownand sizing of panels.
The independent raising of both themain saw blade and the scoring sawblade is now available on the SCMSigma Prima beam saw range, thusincreasing the potential of using thesaw and making possible moremachining facilities.
The main saw blade and scoring sawblade carriage, with independentraising on linear guides andrecirculating ball screws, is essential forthe execution of post-formed panelsizing (40mm max. height), slots andgrooves with 35mm max. height.
The optimised height adjustment ofthe main blade projection on twolevels, permits the setting of the lower
blade height in order to limit the bladewear and assure a better finishingquality. Time optimisation andreduction of costs for tool maintenanceare additional benefits.
Finishing accuracy is also assuredwhen machining materials other thanwood. Moreover, a device for bladelubrication is now available whichallows the use of the machine for sizingof materials other than wood, byreducing friction during machiningand thus improving cutting andfinishing quality.
SCM’s most advanced saw carriagetechnology is now available with thisnew application, to meet every workingrequirement with a reduced investmentin an SCM Sigma Prima Beam Saw.
For more information contact SCMGB on 0115 977 0044 or visit thewebsite at www.scmgroup-uk.com
more from your saw
Left. The new saw carriage.
Below. SCM’s lifting device ensures easy panel handling.
A saw carriage with independent raising ofthe main and scoringsaw blades is now available on the SCMSigma Prima Beam Saw.
The SCM Sigma Prima beam saw - now entry level startswith sophistication.
35 SCM Saw.qxd 17/2/15 10:10 am Page 1
36 • FURNITURE JOURNAL MARCH 2015
The Austrian machine manufacturingspecialist Felder Group, started2015 with a celebration: the
handing over of its 30,000th woodworking machine. The proud owner,Fritz Oberhauser, has equipped hisworkshop in Bavaria with a Kappa 550panel saw that ticks all the boxes.Alongside the sliding table panel saw,Fritz has also invested in an Exact 63thicknesser and a complete extractionsystem.
Martin Felder is delighted with FritzOberhauser’s acquisition of the Kappa550: “Our close relationship with ourcustomers enables us to take on boardtheir practical requirements, whichdirectly influences the development ournew machine concepts,” he says. “Weare all very proud of the sale of our30,000th machine and I am happy toknow this panel saw will be in verygood hands”.
Format-4 has been an extraordinarysuccess story ever since its launch at the
turn of the millennium, with numerousinnovations and patents, maximumoperating comfort and perfect precisioncontributing significantly towards therise of the brand. Constant innovationis a feature of the Format-4 range andthe latest developments in technologyenable Felder to simulate a customer'sproduction. A Format-4 can beconfigured exactly to suit customers’individual requirements.
In recognition of its developmentsand innovations, Felder Group has beengiven numerous international awards:the Bayerische Staatspreis, the IF-Design-Award and the Adolf-Loos Preis,are testimony of the passion thatunderpins the demands of the FelderGroup.
For further information aboutFormat-4, or to see how a Format-4Kappa 550 panel saw can benefit yourworkshop, visit www.Format-4.com orcall the Felder Group UK on 01908635000.
a milestoneFelder celebrates the
handover of the30,000th wood-
working machine.
The Kappa 550 e-motion.
Managing Directors Martin and HansjörgFelder at the handover of Felder Group’s
30,000th machine to Fritz Oberhauser at theFORMAT-4 factory in Hall in Tirol.
new
36 Felder Saw.qxd 17/2/15 10:18 am Page 2
The scoring blade moves into the park position at the touch of a button.
‘‘Control’’ scoring unit
Maximum main blade use, without the need to remove the scoring blade
FORMAT-4 Quality and precision
from AUSTRIA
Fine woodworking machinery from small business to large industry
FORMAT-4 - A range of over 40 machines for large business and industry
Tel. 01908 307000Unit 2, Sovereign Business Park, Joplin CourtCrownhill, MK8 0JP MILTON KEYNES
www.format-4.co.uk
The ultimate Sliding Table Panel Saw
kappa 550e-motion | x-motion
IMPRESSIVE DETAILS:
The ‘‘X-Roll’’ table guiding system, a tried and tested system offers unrivalled smoothness, complete precision and maintenance free operation. ‘‘Easy-Glide’’ tilt segment, zero maintenance, dust resistant and uncompromised precision.
Quick, simple, tool free: The patented saw blade quick change system offers record breaking changeover times of the main saw blade.
38 COMBILIFT LIGNA ADS.qxd 17/2/15 10:36 am Page 2
FURNITURE JOURNAL MARCH 2015 • 39
For the universal sharpening ofcarbide tipped circular saw bladesup to 840 and with the option of
1300mm diameter, Vollmer haslaunched its new line of CHP840 andCHP1300 grinding centres. The nextgeneration grinding centre has fourCNC-controlled axes for the accurategrinding and polishing of virtually alltooth geometries in a single cycle.
This groundbreaking new grindingconcept delivers ease of use with aningenious new multi-function handwheel and programs for use in thealuminium, plastic, wood and the metalcutting sectors. The result is a newrange of machines that provide theperfect combination of precision,productivity and flexibility for theuniversal machining of TCT saw bladesfrom 80 up to 1300mm diameter.
The latest addition has a compactfootprint to save floor-space, a 10-inchLCD colour display with a multi-function hand wheel for fast and safeoperation and an operator friendlylarge viewing window. In addition, the
new CHP machines are fully enclosedfor maximum safety, noise andemission protection and sit on a robust,vibration free platform for optimalsharpening performance.
With oscillation grinding as standardand motor driven hook and clearanceangle adjustment, the CHP provideshigh material removal rates with theflexibility to rapidly switch from face totop grinding. For the solid wood andfurniture producing sectors, the CHPhas diagonally integrated feed pawlwith pneumatic lift that ensures evenchipper segments pose no problem forthe new machine. The new CHP alsohas a wide-opening blade clampingmechanism for processing saws with acollar or reinforcement ring. As anoption, it can be supplied with anoptional second feed pawl for toothpitches up to 180mm and a hollowface grinding device for processinghollow face saws.
For more information contactVollmer on 0115 949 1040 or visitwww.vollmer-group.com
super sharpenerVollmer has launched anew line of grinding centres for grinding andpolishing most tooth geometries in a single pass.
The new CHP840.
39 Vollmer.qxd 17/2/15 10:52 am Page 1
40 • FURNITURE JOURNAL MARCH 2015
inside story
The Vector Revolution 180 turns contouredgebanding on its head. Employing anew concept based on the patented
Vector principle, the Vector Revolution 180operates in much the same way as a typicalthroughfeed edgebander - at peak efficiencybut around almost any contour.
The structure of the machine is extremelystable, providing a full field width of 1830mm(72”) in the Y direction. It fits easily withexisting technologies such as nested-basedmanufacturing, where shaped componentscan be efficiently machined from large sheetsat high speed and subsequently processed onthe Vector. The unique combination of thepatented Vector operating system, flat bedand pendulum loading capability means thatshort runs and fast changeover of productshapes and sizes is simple and quick.
Further simplifying changeover, a newPanel Projection system is now available whichprojects the outline of the workpiece onto thebed of the machine. This is a huge help inshort run production environments with con-stantly changing panel shapes because theshape of the panel is projected onto the bed,making pod alignment simple. It also facili-tates positioning the panel on the pods, guar-anteeing correct overhang of the podswithout the need for the operator to check.
The Vector incorporates several uniquefeatures (detailed right) which furtherenhance its performance. Most notable is theSideWinder trimmer unit. This clever device,which is mounted on the work unit, allowsgluing, edging, trimming and glue jointscraping all to be finish processed in one passaround the panel. Top and bottom tracershoes and a horizontal shoe control the radiuscutter heads, dramatically reducing pro-cessing times. The Vector Revolution 180 isfast, efficient - and fully supported with partsand service in the UK by RW Machines.
VECTOR
Left. Changingfrom one tapesize to anotheris extremelysimple: makea positiveadjustmentto the glue
height, feed thenew width of
tape, and adjustthe tape guide
height. The rest is handled by the machine.
Left. A surface scraper is incorporated intothe trimmer unit. This unit operates using
the patented SideWinder system and isperformed simultaneously with all otherunits. The unique design of the surfacescraper means it easily handles panelswhich are not sitting perfectly flatdue to bowing or swelling, withoutdamaging the panel edge. It never-theless maintains a perfectly smoothtransition between the panel surfaceand the edge material.
Above. The Vector Revolution 180 uses a cartridgeand nozzle glue extrusion system which is ideally
suited to the contour banding application. The cartridgeglue nozzle is a closed system which only heats theglue as it is used. From the heated face of thecartridge until it is extruded onto the banding,the glue is not exposed to the atmosphere,so there is no burning or discolouration.
The original colour and propertiesof the glue are maintained. A
further benefit of the glue nozzlesystem is its close proximity tothe first pressure roller, whichmeans even when slowing for
corners, the glue remains moltenuntil pressed onto the panel by
the first pressure roller. This is particularly important when
banding tight radiuses because atreduced feed speed the glue does not
have an opportunity to chill beforebeing pressed onto the panel.
Revolution 180
40-41 RW/Vector InsideStory.qxd 17/2/15 11:07 am Page 2
FURNITURE JOURNAL MARCH 2015 • 41
With more than 25 years experience in the UK market,RW Machines of Bicester has flourished as anindependent supplier of woodworking machinery.Working with many of the prominent names in theindustry, RW offers CNC routers, edgebanders, panelsizing equipment and printing and packagingmachinery. Other fields of activity for the company are
presses for carcase assembly and membrane pressingof vinyls to fascias.
Call: 01869 [email protected]
Left. The jointof the edge where a com-plete 360 degree edging is required iscontrolled by a sensor arm. The speed of approachis automatically reduced at a precise distance from the joint and a sensor accurately detects the beginning of the edge
which remained untrimmed at the cycle start. The trim cutter thencuts the edge with a bevel, the edge is applied and the top/bottom
trimmed leaving a joint of the highest quality.
Right. Another innovation of the Revolution 180is the edge feed mechanism which is mounted
above the aggregate and coils around asimple winder mechanism. The edge is
continuously fed and remains ready forthe next workpiece as soon as the
end cutter has cut the end of theprevious piece. There is no need
for expensive and complex edgefeeding units to pre-cut lengths
for each workpiece.
Below right. Workpieces are supported by means of vacuumcups sitting on a large flat bed which enable absolute flexi-
bility in positioning pods to ensure the workpiece is heldsecurely. Because there is no routing function on the
Vector Revolution 180 the vacuum pods do not getdamaged, and hence full vacuum is achieved with
a 100m3/hr oil vane quiet operating vacuumpump. Power usage is minimal. Exact work-piece positioning is not critical, as thepatented operating system is unaffected bypanel position. A combination of standard
and lifting pods aresupplied. Extras
pods can beo r d e r e d
with themachine.
Theload carrying frame
structure of the VectorRevolution 180 is fabricated
from heavy plate steel and boxsection. It is extremely rigid andprovides a wide, stable support
for the Y axis. All motion iscarried on linear prismatic
bearing rails.
40-41 RW/Vector InsideStory.qxd 17/2/15 11:07 am Page 3
42 • FURNITURE JOURNAL MARCH 2015
Once Dustraction has developed a specification which meets theneeds of the factory and the client is happy, everything is enteredinto a CAD system in preparation for manufacturing on site inOadby, Leicestershire. Manufacturing drawings are downloadedfirst to a CNC plasma cutter (below left) which cuts everycomponent, making holes where necessary for bolts or flanges.The components are then folded or rolled (below right) andassembled (top left). Dustraction manufactures all the supportsteelwork to ensure high quality welds and reliable construction itcan guarantee with confidence. Most is sent out for galvanising.Filter units are painted in the company’s spraybooth (top right).
Dustraction’s fan sets use the reliable construction of paddleblades with a typically British engineering twist to make them runquieter: borrowing technology from the trailing edge of an owl’swing, the impellers (left) are modified to omit troublesomevortices and cut peak frequencies. Ruggedness is retained whilethe painful effect of dominant frequencies is reduced - typicallyfrom 95dB to around 83dB. These are ideal for applications wherewoodwaste is blown directly into the filter.
aa spark
42-44 Dustraction 3pp.qxd 17/2/15 11:32 am Page 2
Made in Britain, designed inBritain - and with that uniquelyBritish spark of genius that
sets its engineering apart - each one ofDustraction’s extraction systems is asindividual as the demands of thefactory it is designed to serve.
You might think that sounds a bitclichéd but Dustraction really is acompany with its roots in the foundryindustry - and everyone that worksthere is an engineer to the core. Quiteliterally, everything that leaves thefactory in Leicestershire has beendesigned, cut from sheet metal,shaped, rolled, welded and assembledby the Dustraction team under oneroof. Having absolute control over
quality and production at all timesmeans Dustraction can guarantee boththe bag life and the emissions of all theextraction systems it installs - andwhen the time comes for you toupgrade or move a system, the ruggedengineering that’s built into everycomponent means disassembling andreassembling can be carried out withconfidence.
But perhaps even more British thanthe traditional engineering skills itemploys is Dustraction’s approach toproblem solving: “We like interestingprojects,” says MD, Steve Matuska. “Wesolve problems. We never admitdefeat.” You can almost hear Churchill’sbulldog spirit in his voice as he reels off
Traditional engineering,
chemistry, acoustics,
ornithology - they’ve all
played a part in the
inventions which have
given Dustraction a place
in a uniquely British
engineering heritage.
FURNITURE JOURNAL MARCH 2015 • 43
k of genius
42-44 Dustraction 3pp.qxd 17/2/15 11:32 am Page 3
44 • FURNITURE JOURNAL MARCH 2015
a string of inventions the team has comeup with to solve knotty issue after knottyissue: the introduction of speciallyformulated sacrificial dust to preventfilters from clogging at a plastics plant;the incorporation of acoustic dampingmaterials and baffles to cut noise levelsat a factory in a residential area; even thedevelopment of specially designed fanblades which prevent the overtonesassociated with a particular material as itstrikes the blades. Chemistry, acoustics,aerodynamics, even ornithology, have allplayed a part in the way Dustraction hassolved specific issues for clients.
Yes, you read correctly: ornithology. The study of birds - or, more correctly
(in the case of Dustraction’s quiet-running paddle blades), the study of owlwings - led to one of Dustraction’s most
significant and beneficial developments:“The feathers at the trailing edge of anowl’s wing are different to those of mostbirds,” says Steve Matuska. “They enablethe owl to fly silently without thevortices disturbing the air as it swoopsclose to the ground.” By using the sameprinciples in the design of its new fanblades, Dustraction was able to takeadvantage of the ruggedness of paddleblade construction, yet provide lowernoise levels from higher pressure fans.The multitude of specially-built cyclofilters that Dustraction has shoe-hornedinto crevices, sited on postage stampsand made its stock in trade seemsalmost mundane in comparison.
To put Dustraction’s 60-plus years ofmanufacturing experience to the test,call 0116 271 3212.
Simple, an understated designelement perhaps - but effective -the rings around Dustraction’sducting prevent sagging whenlong runs are necessary.
What begins with consultation and design (above) ends withmanufacture (right), construction (below) and installation.
42-44 Dustraction 3pp.qxd 17/2/15 11:32 am Page 4
furniture
To feature or advertisein Furniture Journalcall 01502 517115
To request a regular copycall 01502 517116
jou
rnal
IBC DPS WWT CURVO Ads.qxd 18/2/15 9:21 am Page 1
A COMPREHENSIVE RANGE OF TOOLING
We offer an all-round supply and service of all your tooling requirements supported by a quality British manufacturer, and some of the best tooling companies from around the world.-Bespoke tooling designed to your exact specification-Bulk & One off orders Transform your ideas into tooling reality T: 01924 950606 E: info@carbide online.co.ukW: www.carbideonline.co.uk 7-11Halifax Road, Dewsburry, West YorkshireWF13 2JH