FISCHER is not just manufacturing innovative blasting ...
6
FOR THE PERFECT SURFACE
Transcript of FISCHER is not just manufacturing innovative blasting ...
AN EXCELLENT
SERVICE
A BRILLIANTPRODUCT AN INTERNATIONAL SUCCESS STORY
FISCHERJETplast® has a gentle impact to surfaces
without penetrating them – a big advantage compa-
red to standard abrasive blasting media. In order to
ensure this gentle blasting effect only fully hardened
thermoset moulding compounds filled with cellulose
are processed.
FISCHERJETplast® is successfully used around the
world in different industry sectors: cleaning and
activating surfaces, depainting, deflashing and
preparation of surfaces for high quality painting.
Always gentle and effective for brilliant results.
FISCHERJETplast® cleans and activates:
Composite parts before adhesive bonding
e. g. as applied in the aircraft industry
GFK / CFK components
Steel- and chromed moulds of
the rubber and plastic industry.
Aluminum- and steel moulds of
the foam plastic industry
Light metal pressure casting bodies
Extruder screws and injection die mould
tools of the foam plastic industry
Glass fiber reinforced plastic parts
Wooden surfaces
Gemstones
Fassades (in particular of historical
and ancient monuments)
Motor parts
and many more
FISCHERJETplast® depaints:
Parts and components of aircrafts,
e. g. wheel rims and landing gears
Parts and components of automobiles,
e. g. cylinder head gaskets
Vintage car bodies
Fighter jet and helicopter chassis
Ships hulls and car bodies
Composite parts and parts of fiber reinforced composites
and many more
FISCHERJETplast® deflashes and smoothes:
Electronic parts and components
Pressure casted parts
3D printing parts
and many more
FISCHERJETplast® prepares surfaces for:
High quality painting of foam plastic parts
High quality painting of wooden surfaces
High quality painting of metal surfaces
and many more
FOR THE PERFECT SURFACE
As of Ferbuary 2021We are looking for additional distribution partners around the world.
Hamburg
BerlinHannover
Munich
Cologne
Frankfurt/M.
Fischer GmbHSchelderhütte 16D-35687 Dillenburg-Niederscheld
Phone national +49 (0) 2771 . 819361-0Phone international +49 (0) 2771 . 819361-4Fax +49 (0) 2771 . 819361-9
[email protected]/FischerKunststoffStrahlmittel
Take a look at our corporate video
FISCHER is not just manufacturing innovative blasting media
but also consulting and attending it´s well-known customers
professionally in all aspects of applying Plastic Blast Media.
FISCHER makes intensive blasting tests according to
customer specification. These tests are carried out in
Fischer´s own, well equipped test facilities. The blasting
cabinets, used for such tests, can also be rented or leased
by customers for tests in their own premises or purchased
for moderate prices.
FISCHER responds fast, flexible and innovative to customer
requests and specifications. This goes for production,
modification and application of Plastic Blast Media as well
as for after sales service – whenever fast and straight forward
solutions are expected.
AN EXCELLENT
SERVICE
A BRILLIANTPRODUCT AN INTERNATIONAL SUCCESS STORY
FISCHERJETplast® has a gentle impact to surfaces
without penetrating them – a big advantage compa-
red to standard abrasive blasting media. In order to
ensure this gentle blasting effect only fully hardened
thermoset moulding compounds filled with cellulose
are processed.
FISCHERJETplast® is successfully used around the
world in different industry sectors: cleaning and
activating surfaces, depainting, deflashing and
preparation of surfaces for high quality painting.
Always gentle and effective for brilliant results.
FISCHERJETplast® cleans and activates:
Composite parts before adhesive bonding
e. g. as applied in the aircraft industry
GFK / CFK components
Steel- and chromed moulds of
the rubber and plastic industry.
Aluminum- and steel moulds of
the foam plastic industry
Light metal pressure casting bodies
Extruder screws and injection die mould
tools of the foam plastic industry
Glass fiber reinforced plastic parts
Wooden surfaces
Gemstones
Fassades (in particular of historical
and ancient monuments)
Motor parts
and many more
FISCHERJETplast® depaints:
Parts and components of aircrafts,
e. g. wheel rims and landing gears
Parts and components of automobiles,
e. g. cylinder head gaskets
Vintage car bodies
Fighter jet and helicopter chassis
Ships hulls and car bodies
Composite parts and parts of fiber reinforced composites
and many more
FISCHERJETplast® deflashes and smoothes:
Electronic parts and components
Pressure casted parts
3D printing parts
and many more
FISCHERJETplast® prepares surfaces for:
High quality painting of foam plastic parts
High quality painting of wooden surfaces
High quality painting of metal surfaces
and many more
FOR THE PERFECT SURFACE
As of Ferbuary 2021We are looking for additional distribution partners around the world.
Hamburg
BerlinHannover
Munich
Cologne
Frankfurt/M.
Fischer GmbHSchelderhütte 16D-35687 Dillenburg-Niederscheld
Phone national +49 (0) 2771 . 819361-0Phone international +49 (0) 2771 . 819361-4Fax +49 (0) 2771 . 819361-9
[email protected]/FischerKunststoffStrahlmittel
Take a look at our corporate video
FISCHER is not just manufacturing innovative blasting media
but also consulting and attending it´s well-known customers
professionally in all aspects of applying Plastic Blast Media.
FISCHER makes intensive blasting tests according to
customer specification. These tests are carried out in
Fischer´s own, well equipped test facilities. The blasting
cabinets, used for such tests, can also be rented or leased
by customers for tests in their own premises or purchased
for moderate prices.
FISCHER responds fast, flexible and innovative to customer
requests and specifications. This goes for production,
modification and application of Plastic Blast Media as well
as for after sales service – whenever fast and straight forward
solutions are expected.
AN EXCELLENT
SERVICE
A BRILLIANTPRODUCT AN INTERNATIONAL SUCCESS STORY
FISCHERJETplast® has a gentle impact to surfaces
without penetrating them – a big advantage compa-
red to standard abrasive blasting media. In order to
ensure this gentle blasting effect only fully hardened
thermoset moulding compounds filled with cellulose
are processed.
FISCHERJETplast® is successfully used around the
world in different industry sectors: cleaning and
activating surfaces, depainting, deflashing and
preparation of surfaces for high quality painting.
Always gentle and effective for brilliant results.
FISCHERJETplast® cleans and activates:
Composite parts before adhesive bonding
e. g. as applied in the aircraft industry
GFK / CFK components
Steel- and chromed moulds of
the rubber and plastic industry.
Aluminum- and steel moulds of
the foam plastic industry
Light metal pressure casting bodies
Extruder screws and injection die mould
tools of the foam plastic industry
Glass fiber reinforced plastic parts
Wooden surfaces
Gemstones
Fassades (in particular of historical
and ancient monuments)
Motor parts
and many more
FISCHERJETplast® depaints:
Parts and components of aircrafts,
e. g. wheel rims and landing gears
Parts and components of automobiles,
e. g. cylinder head gaskets
Vintage car bodies
Fighter jet and helicopter chassis
Ships hulls and car bodies
Composite parts and parts of fiber reinforced composites
and many more
FISCHERJETplast® deflashes and smoothes:
Electronic parts and components
Pressure casted parts
3D printing parts
and many more
FISCHERJETplast® prepares surfaces for:
High quality painting of foam plastic parts
High quality painting of wooden surfaces
High quality painting of metal surfaces
and many more
FOR THE PERFECT SURFACE
As of Ferbuary 2021We are looking for additional distribution partners around the world.
Hamburg
BerlinHannover
Munich
Cologne
Frankfurt/M.
Fischer GmbHSchelderhütte 16D-35687 Dillenburg-Niederscheld
Phone national +49 (0) 2771 . 819361-0Phone international +49 (0) 2771 . 819361-4Fax +49 (0) 2771 . 819361-9
[email protected]/FischerKunststoffStrahlmittel
Take a look at our corporate video
FISCHER is not just manufacturing innovative blasting media
but also consulting and attending it´s well-known customers
professionally in all aspects of applying Plastic Blast Media.
FISCHER makes intensive blasting tests according to
customer specification. These tests are carried out in
Fischer´s own, well equipped test facilities. The blasting
cabinets, used for such tests, can also be rented or leased
by customers for tests in their own premises or purchased
for moderate prices.
FISCHER responds fast, flexible and innovative to customer
requests and specifications. This goes for production,
modification and application of Plastic Blast Media as well
as for after sales service – whenever fast and straight forward
solutions are expected.
TYPE II12 – 16 mesh
TYPE II20 – 30 mesh
TYPE II40 – 60 mesh
TYPE II16 – 20 mesh
TYPE II30 – 40 mesh
TYPE II60 – 80 mesh
Plastic Blast Media are eco-friendly, reliable and inexpensive. FISCHERJETplast®
is extremely clean, easily applicable and can be used several times. It is
absolutely nontoxic and it´s storage time is unlimited. Further advantages are:
Blasting without roughening or deformation of the surface
(the media can be adjusted to the object to be blasted)
Very little expenditure of time (because of sharp particles the surfaces
are finished very fast particularly if pressure blasting cabinets are used)
Long endurance because of up to 30 blasting cycles
Chemically inert, therefore no harm to health or environment
Very limited sticking of dust at the surfaces
because of a very efficient antistaticum
Guaranteed continuously high quality because of
strict internal quality management
Also guaranteed high quality through periodic
examination in own and external laboratories
Certified by TÜV-Rheinland according to DIN EN ISO 9001:2008
Approved for the civil and military aviation by
U.S. Air Force through the Standard MIL-P-85891
Approved by the NATO
Approved by the German Federal Armed Forces (Bundeswehr)
Approved by Rolls Royce
Approved by Boeing
Approved by Airbus for producing High-quality
composite fiber components
Approved by Pratt & Whitney
Approved by General Electric
Approved by MTU
Approved by Lufthansa Technik AG and many
more aeronautics companys in the world
Approved by the pharmaceutical industry (confirms with
the requirements of the European Pharmacopeia)
has carried out an energy audit
according to DIN EN 16247-1
Best references
FASCINATING ADVANTAGES PRODUCT SPECIFICATION
Colour
Physical Propertieshardness Barcolhardness Mohs / HRRspec. weight (gr./cm3)weight of bulk goods (gr./ ltr.)ignition temperatureDelivery Detailsproperty
packed in PE-bagspacked in Fiber-Drums
max. packed on owpStandard-Sizes
0,2 – 0,6 mm
0,6 – 1,0 mm
1,0 – 1,6 mm
70 – 140 mesh 0,10 – 0,20 mm
60 – 80 mesh 0,18 – 0,25 mm
40 – 60 mesh 0,25 – 0,40 mm
30 – 60 mesh 0,25 – 0,60 mm
30 – 40 mesh 0,40 – 0,60 mm
20 – 40 mesh 0,40 – 0,80 mm
20 – 30 mesh 0,60 – 0,80 mm
16 – 20 mesh 0,80 – 1,20 mm
12 – 20 mesh 0,80 – 1,70 mm
12 – 16 mesh 1,20 – 1,70 mm
8 – 16 mesh 1,20 – 2,38 mm
6 – 16 mesh 1,10 – 3,15 mm
0,50 x 0,50 mm
0,75 x 0,75 mm
1,00 x 1,00 mm
1,50 x 1,50 mmSpecial-Sizes
TYPE A(UREA +
MELAMIN + PHENOL,
without antistatic)
Industry-standard
grey / black
50 - 743,0 – 4,0 Mohs
1,45 – 1,52700 – 800> 500 °C
ripple granules
25 kg / bag50 kg / Drum125 kg / Drum
1.000 kg
xxx
on request
TYPE II(UREA +
antistatic)
Certified by the U.S. Air Force by MIL-P-85891
white / multicolour
54 - 623,5 Mohs1,45 – 1,52700 – 800> 500 °C
ripple granules
25 kg / bag50 kg / Drum125 kg / Drum
1.000 kg
x
x
x
x
x
x
x
x
x
x
x
x
on request
TYPE III(MELAMIN +
antistatic)
Certified by the U.S. Air Force by MIL-P-85891
white / multicolour
64 - 743,5 - 4,0 Mohs
1,45 – 1,52700 – 800> 500 °C
ripple granules
25 kg / bag50 kg / Drum125 kg / Drum
1.000 kg
x
x
x
x
x
x
x
x
x
on request
TYPE V(ACRYLIC +antistatic)
Certified by the U.S. Air Force by MIL-P-85891
light / multicolour
46 - 543,0 - 3,5 Mohs
1,10 – 1,20550 – 650> 100 °C
ripple granules
20 kg + 25 kg / bag–
100 kg +125 kg / Drum1.000 kg
x
x
x
x
x
x
x
x
x
on request
TYPE PA6(POLYAMID) Deflashing of
thermoset parts
cylindrical / cubical
red + diverse
120 HRR1,12 – 1,14
680> 215 °C
ripple granules
25 kg / cardboard box––
600 kg
x
x
x
x
on request
TYPE PC(POLYCARBONAT) Cryogen-Deflashing of rubber molded
parts
cylindrical / cubical
nature + diverse
120 HRR1,20
700 – 740> 150 °C
ripple granules
25 kg / cardboard box––
600 kg
x
x
x
x
on request
UREA (UF) = Urea moulding compound PHENOL (PF) = Phenolic moulding cmpoundMELAMIN (MF) = Melamine moulding compound ACRYLIC (PMMA) = Polymethylacrylat
TYPE II12 – 16 mesh
TYPE II20 – 30 mesh
TYPE II40 – 60 mesh
TYPE II16 – 20 mesh
TYPE II30 – 40 mesh
TYPE II60 – 80 mesh
Plastic Blast Media are eco-friendly, reliable and inexpensive. FISCHERJETplast®
is extremely clean, easily applicable and can be used several times. It is
absolutely nontoxic and it´s storage time is unlimited. Further advantages are:
Blasting without roughening or deformation of the surface
(the media can be adjusted to the object to be blasted)
Very little expenditure of time (because of sharp particles the surfaces
are finished very fast particularly if pressure blasting cabinets are used)
Long endurance because of up to 30 blasting cycles
Chemically inert, therefore no harm to health or environment
Very limited sticking of dust at the surfaces
because of a very efficient antistaticum
Guaranteed continuously high quality because of
strict internal quality management
Also guaranteed high quality through periodic
examination in own and external laboratories
Certified by TÜV-Rheinland according to DIN EN ISO 9001:2008
Approved for the civil and military aviation by
U.S. Air Force through the Standard MIL-P-85891
Approved by the NATO
Approved by the German Federal Armed Forces (Bundeswehr)
Approved by Rolls Royce
Approved by Boeing
Approved by Airbus for producing High-quality
composite fiber components
Approved by Pratt & Whitney
Approved by General Electric
Approved by MTU
Approved by Lufthansa Technik AG and many
more aeronautics companys in the world
Approved by the pharmaceutical industry (confirms with
the requirements of the European Pharmacopeia)
has carried out an energy audit
according to DIN EN 16247-1
Best references
FASCINATING ADVANTAGES PRODUCT SPECIFICATION
Colour
Physical Propertieshardness Barcolhardness Mohs / HRRspec. weight (gr./cm3)weight of bulk goods (gr./ ltr.)ignition temperatureDelivery Detailsproperty
packed in PE-bagspacked in Fiber-Drums
max. packed on owpStandard-Sizes
0,2 – 0,6 mm
0,6 – 1,0 mm
1,0 – 1,6 mm
70 – 140 mesh 0,10 – 0,20 mm
60 – 80 mesh 0,18 – 0,25 mm
40 – 60 mesh 0,25 – 0,40 mm
30 – 60 mesh 0,25 – 0,60 mm
30 – 40 mesh 0,40 – 0,60 mm
20 – 40 mesh 0,40 – 0,80 mm
20 – 30 mesh 0,60 – 0,80 mm
16 – 20 mesh 0,80 – 1,20 mm
12 – 20 mesh 0,80 – 1,70 mm
12 – 16 mesh 1,20 – 1,70 mm
8 – 16 mesh 1,20 – 2,38 mm
6 – 16 mesh 1,10 – 3,15 mm
0,50 x 0,50 mm
0,75 x 0,75 mm
1,00 x 1,00 mm
1,50 x 1,50 mmSpecial-Sizes
TYPE A(UREA +
MELAMIN + PHENOL,
without antistatic)
Industry-standard
grey / black
50 - 743,0 – 4,0 Mohs
1,45 – 1,52700 – 800> 500 °C
ripple granules
25 kg / bag50 kg / Drum125 kg / Drum
1.000 kg
xxx
on request
TYPE II(UREA +
antistatic)
Certified by the U.S. Air Force by MIL-P-85891
white / multicolour
54 - 623,5 Mohs1,45 – 1,52700 – 800> 500 °C
ripple granules
25 kg / bag50 kg / Drum125 kg / Drum
1.000 kg
x
x
x
x
x
x
x
x
x
x
x
x
on request
TYPE III(MELAMIN +
antistatic)
Certified by the U.S. Air Force by MIL-P-85891
white / multicolour
64 - 743,5 - 4,0 Mohs
1,45 – 1,52700 – 800> 500 °C
ripple granules
25 kg / bag50 kg / Drum125 kg / Drum
1.000 kg
x
x
x
x
x
x
x
x
x
on request
TYPE V(ACRYLIC +antistatic)
Certified by the U.S. Air Force by MIL-P-85891
light / multicolour
46 - 543,0 - 3,5 Mohs
1,10 – 1,20550 – 650> 100 °C
ripple granules
20 kg + 25 kg / bag–
100 kg +125 kg / Drum1.000 kg
x
x
x
x
x
x
x
x
x
on request
TYPE PA6(POLYAMID) Deflashing of
thermoset parts
cylindrical / cubical
red + diverse
120 HRR1,12 – 1,14
680> 215 °C
ripple granules
25 kg / cardboard box––
600 kg
x
x
x
x
on request
TYPE PC(POLYCARBONAT) Cryogen-Deflashing of rubber molded
parts
cylindrical / cubical
nature + diverse
120 HRR1,20
700 – 740> 150 °C
ripple granules
25 kg / cardboard box––
600 kg
x
x
x
x
on request
UREA (UF) = Urea moulding compound PHENOL (PF) = Phenolic moulding cmpoundMELAMIN (MF) = Melamine moulding compound ACRYLIC (PMMA) = Polymethylacrylat
TYPE II12 – 16 mesh
TYPE II20 – 30 mesh
TYPE II40 – 60 mesh
TYPE II16 – 20 mesh
TYPE II30 – 40 mesh
TYPE II60 – 80 mesh
Plastic Blast Media are eco-friendly, reliable and inexpensive. FISCHERJETplast®
is extremely clean, easily applicable and can be used several times. It is
absolutely nontoxic and it´s storage time is unlimited. Further advantages are:
Blasting without roughening or deformation of the surface
(the media can be adjusted to the object to be blasted)
Very little expenditure of time (because of sharp particles the surfaces
are finished very fast particularly if pressure blasting cabinets are used)
Long endurance because of up to 30 blasting cycles
Chemically inert, therefore no harm to health or environment
Very limited sticking of dust at the surfaces
because of a very efficient antistaticum
Guaranteed continuously high quality because of
strict internal quality management
Also guaranteed high quality through periodic
examination in own and external laboratories
Certified by TÜV-Rheinland according to DIN EN ISO 9001:2008
Approved for the civil and military aviation by
U.S. Air Force through the Standard MIL-P-85891
Approved by the NATO
Approved by the German Federal Armed Forces (Bundeswehr)
Approved by Rolls Royce
Approved by Boeing
Approved by Airbus for producing High-quality
composite fiber components
Approved by Pratt & Whitney
Approved by General Electric
Approved by MTU
Approved by Lufthansa Technik AG and many
more aeronautics companys in the world
Approved by the pharmaceutical industry (confirms with
the requirements of the European Pharmacopeia)
has carried out an energy audit
according to DIN EN 16247-1
Best references
FASCINATING ADVANTAGES PRODUCT SPECIFICATION
Colour
Physical Propertieshardness Barcolhardness Mohs / HRRspec. weight (gr./cm3)weight of bulk goods (gr./ ltr.)ignition temperatureDelivery Detailsproperty
packed in PE-bagspacked in Fiber-Drums
max. packed on owpStandard-Sizes
0,2 – 0,6 mm
0,6 – 1,0 mm
1,0 – 1,6 mm
70 – 140 mesh 0,10 – 0,20 mm
60 – 80 mesh 0,18 – 0,25 mm
40 – 60 mesh 0,25 – 0,40 mm
30 – 60 mesh 0,25 – 0,60 mm
30 – 40 mesh 0,40 – 0,60 mm
20 – 40 mesh 0,40 – 0,80 mm
20 – 30 mesh 0,60 – 0,80 mm
16 – 20 mesh 0,80 – 1,20 mm
12 – 20 mesh 0,80 – 1,70 mm
12 – 16 mesh 1,20 – 1,70 mm
8 – 16 mesh 1,20 – 2,38 mm
6 – 16 mesh 1,10 – 3,15 mm
0,50 x 0,50 mm
0,75 x 0,75 mm
1,00 x 1,00 mm
1,50 x 1,50 mmSpecial-Sizes
TYPE A(UREA +
MELAMIN + PHENOL,
without antistatic)
Industry-standard
grey / black
50 - 743,0 – 4,0 Mohs
1,45 – 1,52700 – 800> 500 °C
ripple granules
25 kg / bag50 kg / Drum125 kg / Drum
1.000 kg
xxx
on request
TYPE II(UREA +
antistatic)
Certified by the U.S. Air Force by MIL-P-85891
white / multicolour
54 - 623,5 Mohs1,45 – 1,52700 – 800> 500 °C
ripple granules
25 kg / bag50 kg / Drum125 kg / Drum
1.000 kg
x
x
x
x
x
x
x
x
x
x
x
x
on request
TYPE III(MELAMIN +
antistatic)
Certified by the U.S. Air Force by MIL-P-85891
white / multicolour
64 - 743,5 - 4,0 Mohs
1,45 – 1,52700 – 800> 500 °C
ripple granules
25 kg / bag50 kg / Drum125 kg / Drum
1.000 kg
x
x
x
x
x
x
x
x
x
on request
TYPE V(ACRYLIC +antistatic)
Certified by the U.S. Air Force by MIL-P-85891
light / multicolour
46 - 543,0 - 3,5 Mohs
1,10 – 1,20550 – 650> 100 °C
ripple granules
20 kg + 25 kg / bag–
100 kg +125 kg / Drum1.000 kg
x
x
x
x
x
x
x
x
x
on request
TYPE PA6(POLYAMID) Deflashing of
thermoset parts
cylindrical / cubical
red + diverse
120 HRR1,12 – 1,14
680> 215 °C
ripple granules
25 kg / cardboard box––
600 kg
x
x
x
x
on request
TYPE PC(POLYCARBONAT) Cryogen-Deflashing of rubber molded
parts
cylindrical / cubical
nature + diverse
120 HRR1,20
700 – 740> 150 °C
ripple granules
25 kg / cardboard box––
600 kg
x
x
x
x
on request
UREA (UF) = Urea moulding compound PHENOL (PF) = Phenolic moulding cmpoundMELAMIN (MF) = Melamine moulding compound ACRYLIC (PMMA) = Polymethylacrylat
TYPE II12 – 16 mesh
TYPE II20 – 30 mesh
TYPE II40 – 60 mesh
TYPE II16 – 20 mesh
TYPE II30 – 40 mesh
TYPE II60 – 80 mesh
Plastic Blast Media are eco-friendly, reliable and inexpensive. FISCHERJETplast®
is extremely clean, easily applicable and can be used several times. It is
absolutely nontoxic and it´s storage time is unlimited. Further advantages are:
Blasting without roughening or deformation of the surface
(the media can be adjusted to the object to be blasted)
Very little expenditure of time (because of sharp particles the surfaces
are finished very fast particularly if pressure blasting cabinets are used)
Long endurance because of up to 30 blasting cycles
Chemically inert, therefore no harm to health or environment
Very limited sticking of dust at the surfaces
because of a very efficient antistaticum
Guaranteed continuously high quality because of
strict internal quality management
Also guaranteed high quality through periodic
examination in own and external laboratories
Certified by TÜV-Rheinland according to DIN EN ISO 9001:2008
Approved for the civil and military aviation by
U.S. Air Force through the Standard MIL-P-85891
Approved by the NATO
Approved by the German Federal Armed Forces (Bundeswehr)
Approved by Rolls Royce
Approved by Boeing
Approved by Airbus for producing High-quality
composite fiber components
Approved by Pratt & Whitney
Approved by General Electric
Approved by MTU
Approved by Lufthansa Technik AG and many
more aeronautics companys in the world
Approved by the pharmaceutical industry (confirms with
the requirements of the European Pharmacopeia)
has carried out an energy audit
according to DIN EN 16247-1
Best references
FASCINATING ADVANTAGES PRODUCT SPECIFICATION
Colour
Physical Propertieshardness Barcolhardness Mohs / HRRspec. weight (gr./cm3)weight of bulk goods (gr./ ltr.)ignition temperatureDelivery Detailsproperty
packed in PE-bagspacked in Fiber-Drums
max. packed on owpStandard-Sizes
0,2 – 0,6 mm
0,6 – 1,0 mm
1,0 – 1,6 mm
70 – 140 mesh 0,10 – 0,20 mm
60 – 80 mesh 0,18 – 0,25 mm
40 – 60 mesh 0,25 – 0,40 mm
30 – 60 mesh 0,25 – 0,60 mm
30 – 40 mesh 0,40 – 0,60 mm
20 – 40 mesh 0,40 – 0,80 mm
20 – 30 mesh 0,60 – 0,80 mm
16 – 20 mesh 0,80 – 1,20 mm
12 – 20 mesh 0,80 – 1,70 mm
12 – 16 mesh 1,20 – 1,70 mm
8 – 16 mesh 1,20 – 2,38 mm
6 – 16 mesh 1,10 – 3,15 mm
0,50 x 0,50 mm
0,75 x 0,75 mm
1,00 x 1,00 mm
1,50 x 1,50 mmSpecial-Sizes
TYPE A(UREA +
MELAMIN + PHENOL,
without antistatic)
Industry-standard
grey / black
50 - 743,0 – 4,0 Mohs
1,45 – 1,52700 – 800> 500 °C
ripple granules
25 kg / bag50 kg / Drum125 kg / Drum
1.000 kg
xxx
on request
TYPE II(UREA +
antistatic)
Certified by the U.S. Air Force by MIL-P-85891
white / multicolour
54 - 623,5 Mohs1,45 – 1,52700 – 800> 500 °C
ripple granules
25 kg / bag50 kg / Drum125 kg / Drum
1.000 kg
x
x
x
x
x
x
x
x
x
x
x
x
on request
TYPE III(MELAMIN +
antistatic)
Certified by the U.S. Air Force by MIL-P-85891
white / multicolour
64 - 743,5 - 4,0 Mohs
1,45 – 1,52700 – 800> 500 °C
ripple granules
25 kg / bag50 kg / Drum125 kg / Drum
1.000 kg
x
x
x
x
x
x
x
x
x
on request
TYPE V(ACRYLIC +antistatic)
Certified by the U.S. Air Force by MIL-P-85891
light / multicolour
46 - 543,0 - 3,5 Mohs
1,10 – 1,20550 – 650> 100 °C
ripple granules
20 kg + 25 kg / bag–
100 kg +125 kg / Drum1.000 kg
x
x
x
x
x
x
x
x
x
on request
TYPE PA6(POLYAMID) Deflashing of
thermoset parts
cylindrical / cubical
red + diverse
120 HRR1,12 – 1,14
680> 215 °C
ripple granules
25 kg / cardboard box––
600 kg
x
x
x
x
on request
TYPE PC(POLYCARBONAT) Cryogen-Deflashing of rubber molded
parts
cylindrical / cubical
nature + diverse
120 HRR1,20
700 – 740> 150 °C
ripple granules
25 kg / cardboard box––
600 kg
x
x
x
x
on request
UREA (UF) = Urea moulding compound PHENOL (PF) = Phenolic moulding cmpoundMELAMIN (MF) = Melamine moulding compound ACRYLIC (PMMA) = Polymethylacrylat
AN EXCELLENT
SERVICE
A BRILLIANTPRODUCT AN INTERNATIONAL SUCCESS STORY
FISCHERJETplast® has a gentle impact to surfaces
without penetrating them – a big advantage compa-
red to standard abrasive blasting media. In order to
ensure this gentle blasting effect only fully hardened
thermoset moulding compounds filled with cellulose
are processed.
FISCHERJETplast® is successfully used around the
world in different industry sectors: cleaning and
activating surfaces, depainting, deflashing and
preparation of surfaces for high quality painting.
Always gentle and effective for brilliant results.
FISCHERJETplast® cleans and activates:
Composite parts before adhesive bonding
e. g. as applied in the aircraft industry
GFK / CFK components
Steel- and chromed moulds of
the rubber and plastic industry.
Aluminum- and steel moulds of
the foam plastic industry
Light metal pressure casting bodies
Extruder screws and injection die mould
tools of the foam plastic industry
Glass fiber reinforced plastic parts
Wooden surfaces
Gemstones
Fassades (in particular of historical
and ancient monuments)
Motor parts
and many more
FISCHERJETplast® depaints:
Parts and components of aircrafts,
e. g. wheel rims and landing gears
Parts and components of automobiles,
e. g. cylinder head gaskets
Vintage car bodies
Fighter jet and helicopter chassis
Ships hulls and car bodies
Composite parts and parts of fiber reinforced composites
and many more
FISCHERJETplast® deflashes and smoothes:
Electronic parts and components
Pressure casted parts
3D printing parts
and many more
FISCHERJETplast® prepares surfaces for:
High quality painting of foam plastic parts
High quality painting of wooden surfaces
High quality painting of metal surfaces
and many more
FOR THE PERFECT SURFACE
As of Ferbuary 2021We are looking for additional distribution partners around the world.
Hamburg
BerlinHannover
Munich
Cologne
Frankfurt/M.
Fischer GmbHSchelderhütte 16D-35687 Dillenburg-Niederscheld
Phone national +49 (0) 2771 . 819361-0Phone international +49 (0) 2771 . 819361-4Fax +49 (0) 2771 . 819361-9
[email protected]/FischerKunststoffStrahlmittel
Take a look at our corporate video
FISCHER is not just manufacturing innovative blasting media
but also consulting and attending it´s well-known customers
professionally in all aspects of applying Plastic Blast Media.
FISCHER makes intensive blasting tests according to
customer specification. These tests are carried out in
Fischer´s own, well equipped test facilities. The blasting
cabinets, used for such tests, can also be rented or leased
by customers for tests in their own premises or purchased
for moderate prices.
FISCHER responds fast, flexible and innovative to customer
requests and specifications. This goes for production,
modification and application of Plastic Blast Media as well
as for after sales service – whenever fast and straight forward
solutions are expected.
