First Step Cirrus Low air loss surface
Transcript of First Step Cirrus Low air loss surface
First Step Cirrus Low air loss surface
…with people in mind
01.T
SS
.00
60.
1.G
B-I
NT.
1.A
HG
• A
ug
ust
201
5
01.TSS.0060.1.GB-INT.1.AHG_Cirrus_brochure.indd 2 23/10/15 10:54
Pressure Friction Temperature Moisture
250
200
150
100
50
0
g/m2/hr
Hill-Rom® Envision with fitted sheet3
Competitive average4*
Hill-Rom®
P5005
First Step Select Classic2
First StepCirrus2
60.6 67.482.2
97.7
> 200
To make educated choices, clinicians require solid evidence related to the therapeutic solutions they suggest for each patient condition.
Low air loss is defined as “A feature that provides a flow of air to assist in managing the heat and humidity (microclimate) of the skin.1”
This simplistic definition can be applied to a multitude of products that all perform very differently when it comes to delivering the best possible care to a patient at risk.
Our goal: Providing the best possible solution for each patient.
Truly understanding the benefits of low air loss technology
HELPSREDUCE2
As the pioneer of low air loss technology, ArjoHuntleigh inherently understands all of its benefits. More importantly, ArjoHuntleigh acknowledges and understands the limits of current low air loss designs and potential for new technologies. ArjoHuntleigh strives to help facilities provide better outcomes for their patients at risk of developing pressure ulcers, by helping reduce:
$130,000: THE COST OF A SINGLE EPISODE OF CAREFOR A CATEGORY IV PRESSURE ULCER
Brem, H. Maggi, J. Nierman, D. et al. (2010). High cost of stage IV pressure ulcers, The American Journal of Surgery, 200:473-477)
01.TSS.0060.1.GB-INT.1.AHG_Cirrus_brochure.indd 3 23/10/15 10:54
250
200
150
100
50
0
g/m2/hr
Hill-Rom® Envision with fitted sheet3
Competitive average4*
Hill-Rom®
P5005
First Step Select Classic2
First StepCirrus2
60.6 67.482.2
97.7
> 200
250
200
150
100
50
0
g/m2/hr
Hill-Rom® Envision with fitted sheet3
Competitive average4*
Hill-Rom®
P5005
First Step Select Classic2
First StepCirrus2
60.6 67.482.2
97.7
> 200
250
200
150
100
50
0
g/m2/hr
Hill-Rom® Envision with fitted sheet3
Competitive average4*
Hill-Rom®
P5005
First Step Select Classic2
First StepCirrus2
60.6 67.482.2
97.7
> 200
250
200
150
100
50
0
g/m2/hr
Hill-Rom® Envision with fitted sheet3
Competitive average4*
Hill-Rom®
P5005
First Step Select Classic2
First StepCirrus2
60.6 67.482.2
97.7
> 200
250
200
150
100
50
0
g/m2/hr
Hill-Rom® Envision with fitted sheet3
Competitive average4*
Hill-Rom®
P5005
First Step Select Classic2
First StepCirrus2
60.6 67.482.2
97.7
> 200
Redefining the limits of low air loss technology, and providing you with the information needed to make a patient focused decision.
First Step CirrusSimple, Tried and True
Enhanced Moisture Vapour Transmission Rate (MVTR)Design directed air flow enhances MVTR and allows the use of a standard cotton sheet without impacting performance.2
Fitted sheetThe integrated High Performance Medical Fabric replaces the need for a specialized top cover sheet. Therefore, helping reduce the nursing time associated with specialty sheet changes.
Non-slip edgingFirst Step® Cirrus non-slip edging helps reduce the sliding that happens at the edge of traditional low air loss surfaces during patient egress.2
Advanced pressure redistributionFirst Step Cirrus provides the same level of advanced pressure redistribution as the First Step Classic support surface.2
Research shows that compared to competitors, First Step Cirrus provides improved MVTR results2 > 200 g/m2/hr.
[ MVTR, the breathability of a fabric, directly contributes to microclimate management. ]
Do You Know Your MVTR?
MOISTURE VAPOUR TRANSMISSION RATE
*Surfaces tested include: Encompass® AccuMax QuantumTM Complete, SenTechTM STAGE IV® 2000, Gaymar® SPRPlus® III, Stryker® Impression®, Hill-Rom® TotalCare® P500, Hill-Rom® Envision®, Hill-Rom® AcuCair®.
As reported by Hill-Rom3,5
01.TSS.0060.1.GB-INT.1.AHG_Cirrus_brochure.indd 4 23/10/15 10:54
Only ArjoHuntleigh designed parts, which are designed specifically for the purpose, should be used on the equipment and products supplied by ArjoHuntleigh. As our policy is one of continuous development we reserve the right to modify designs and specifications without prior notice.
® and ™ are trademarks belonging to the ArjoHuntleigh group of companies. © ArjoHuntleigh, 2015. Envision, Hill-Rom are trademarks of Hill-Rom Services Inc.
ArjoHuntleigh AB, Hans Michelsensgatan 10, 211 20 Malmö, Sweden
Phone: +46 (0) 10 335 45 00
www.ArjoHuntleigh.com
References
1. National Pressure Ulcer Advisory Panel, European Pressure Ulcer Advisory Panel and Pan Pacific Pressure Injury Alliance. Prevention and Treatment of Pressure Ulcers: Clinical Practice Guideline. Emily Haesler (Ed.). Cambridge Media: Osborne Park, Western Australia; 2014: 278.
2. ArjoHuntleigh Data on File.
3. Williamson R, Lachenbruch C, VanGlider C. A Laboratory Study Examining the Impact of Linen Use on Low-air-loss Support Surface Heat and Water Vapour Transmission Rates; Ostomy Wound Management. August 2013
4. ArjoHuntleigh Data on File.
5. Hill-Rom Services, Inc. Next generation low air loss— more than just airflow. 155960 rev 1, 12/19/08. Electronic Brochure.
Product Specifications
Mattress Length 84” 213 cm
Mattress Width 35” 89 cm
Mattress Height 5” 10 cm
Max Patient Weight 300 lb. 136 kg
Mattress Weight 7.7 lb. 3.5 kg
Indications Prevention and Treatment of pressure ulcers (Stage I-IV)
Contraindications Unstable Spinal Cord Injury, Unstable Vertebral Fracture,
Cervical Traction
01.T
SS
.00
60.
1.G
B-I
NT.
1.A
HG
• A
ug
ust
201
5
Getinge Group is a leading global provider of products and systems that
contribute to quality enhancement and cost efficiency within healthcare
and life sciences. We operate under the three brands of ArjoHuntleigh,
Getinge and Maquet. ArjoHuntleigh focuses on patient mobility and
wound management solutions. Getinge provides solutions for infection
control within healthcare and contamination prevention within life
sciences. Maquet specializes in solutions, therapies and products for
surgical interventions, interventional cardiology and intensive care.
01.TSS.0060.1.GB-INT.1.AHG_Cirrus_brochure.indd 1 23/10/15 10:54