FireBall™OVERVIEW:Designed, machined, assembled and tested by Audix in the USA, the FireBall™ is a professional dynamic instrument microphone intended for harmonica (both diatonic and chromatic) and beatbox. Clear, accurate and capable of handling sound pressure levels in excess of 140 dB without distortion, the FireBall™ is ideally suited for both live stage and studio recording applications.

The FireBall™ is characterized with a cardioid pickup pattern for isolation and feedback control and is equipped with a VLM™ (Very Low Mass) diaphragm for natural sound reproduction with exceptional transient response. With a smooth, uniform frequency response of 50 Hz - 16 kHz, the FireBall™ is lightweight, compact, and comfortable to hold. Roadworthy construction includes a precision machined aluminum body, steel mesh grill, unique three stage marbled anodized finish, laser etched model and serial number, Switchcraft® XLR connector and heavy duty nylon clip.

The FireBall™ is a low impedance microphone; when using the FireBall™ with a guitar amplifier, a high quality low-high impedance transformer (such as T50K) is required.

APPLICATIONS:Live stage, studioHarmonicaVocalsBeatboxPercussionSaxophone, trumpet, tromboneFluteAccordian

SUPPLIED ACCESSORIES:Heavy duty press fit mic clip (DCLIP)Carrying pouch (P1)

OPTIONAL ACCESSORIES: WS357 - External foam windscreenDVICE - Spring loaded rim mount clampDCLAMP - Tension rod mic clampCBL-20 - 20’ XLR-XLR mic cableCBL-DR25 - 25’ right angle XLR mic cableCBL-BP360 - 4’ adapter cable for RAD360 Wireless BodypackT50K- High quality low-high impedance transformer

DYNAMIC INSTRUMENT MICROPHONE

FIREBALL

Dyna

mic I

nstru

ment

FIREBALL W/ CBL-BP360 DCLAMP WS357 CBL-20 T50K

FEATURES:Fits comfortably in the palm of the handHandles “cupping” without impacting sound qualityFull size dynamic capsuleClear and accurate sound reproductionHigh SPL handling without distortionExceptional gain before feedbackProvides excellent isolation from other instruments on stagePrecision machined aluminum body5 year warranty

Transducer Type Dynamic Moving CoilFrequency Response 50 Hz - 16 kHz Polar Pattern Cardioid Output Impedance 150 ohms Sensitivity 1.5 mV / Pa @ 1k Capsule Technology VLM Type BOff Axis Rejection > 23 dBMaximum SPL ≥140 dB Power Requirements NoneConnector Switchcraft® male XLR connectorPolarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connectorHousing / Finish Machined Aluminum / AnodizedWeight 128 g / 4.5 ouncesLength 77.5 mm / 3.05 inches

SPECIFICATIONS: ARCHITECTS AND ENGINEERS SPECIFICATIONS:The microphone shall be of the dynamic type operating on the moving coil principle and the polar pattern of the microphone shall be cardioid. The capsule shall be VLM Type B. The nominal output impedance shall be equal to 150 ohms at 1 kHz. The microphone shall have a sensitivity of 1.5 mV / Pa at 1 kHz and a sound pressure level ≥140 dB. The microphone body shall machined of aluminum and the grill be of steel mesh. The overall dimensions shall be 21.5 mm in diameter at the base, 53.5 mm at the widest point on the grill, and 77.5 mm in length. The microphone shall be the Audix FireBall™.

www.audixusa.com Call: 503-682-6933 Fax: 503-682-7114 Audix Corporation 9400 SW Barber Street, Wilsonville, OR 97070

SERVICE AND WARRANTY:This microphone is under warranty for a period of 5 years from any and all manufacturing defects. Should your microphone fail in any way, please contact the Audix Service department at 503-682-6933. A Return Authorization number is required before returning any products.

CARE AND MAINTENANCE:The Fireball™ is manufactured to exacting specs with roadworthy construction. However, the capsule is highly sensitive and should be handled with care. Avoid extreme temperatures and be sure to store your microphone in the pouch provided when not in use. Moisture of any kind can adversely affect the sound and performance of your microphone.

OPERATION:The Fireball™ is a low impedance microphone and should be plugged into a “mic level” input on your console, mixer, or recording device. Please note that your microphone does not require phantom power and will not be effected in any way by phantom power should it be running simultaneously while the microphone is in operation. Avoid plugging or unplugging the microphone from the PA system unless the channel is muted or the volume of the system turned down.Failure to do so may result in a loud “popping” noise which could seriously damage the speakers in the PA system.

USER TIPS:The FireBall™ has a tight (cardioid) pick-up pattern in order to help eliminate sound from other instruments on stage from “bleeding” into the microphone.The FireBall™ is a low impedance microphone, however, it may be plugged directly into a guitar amp by using the Audix T50k impedance converter. This will allow for the proper gain structure and will insure the best possible sound quality. The FireBall may also be used for a wide variety of instrument and vocal applications. Working distance can be anywhere between 1-6 inches depending on the instruments on stage, the volume of the music, and the type of stage monitors. Allow a distance of 2-3 feet between microphones to avoid phase cancellation issues. *Further miking techiques may be found on our website at www.audixusa.com

FREQUENCY / POLARS:

***All specifications subject to change without notice.

To register your microphone, please visit

www.audixusa.com

DIMENSIONS (mm):

FIRE

BALL

™