F.I.R.E. srl - REFRACTORYCATALOGUE · 2016. 2. 22. · 6 Dimension ‘X’ Part Holder Gasket...

REFRACTORY CATALOGUE

PA R K I N S O N - S P E N C E R R E F R ACTO R I E S L I M I T E D

INTRODUCTION

QUALITY POLICY STATEMENT

This is the seventh edition of our Refractory Catalogue and

it represents a comprehensive library of all standard Emhart

refractory parts available to us at the time of printing. In it

are listed both new and obsolete parts and if you need

assistance in finding the correct refractory parts for your

generation of feeder equipment our sales department will

be pleased to assist you.

As a licensee of Emhart Glass the part numbers listed are

predominantly for Emhart equipment although our full

range of refractory parts contains many more proprietary

and non-standard designs. Details of these are available

upon application to our sales department.

As a major world producer of specialised refractories for

the Glass Industry the quality and consistency of our

products rank as two of our most important objectives.

Our quality management system is accredited by CICS

(Ceramic Industry Certification Scheme), a national

certification body registered with the UK Department of

Trade and Industry, and fully complies to to ISO 9001:2000.

Management, technical and production personnel are

made fully conversant with the objectives of this policy

through ongoing education and training of personnel at all

levels.

D. E. Parkinson

Managing Director

ISO 9001:2000 APPROVED COMPANY

INTRODUCTION

PREFORMS 2

ORIFICE RINGS 5 — 26

SPOUT ACCESSORIES 27 — 29

SPOUTS 30 — 31

INSERTED SPOUTS 32

TUBES 33 — 36

PLUNGERS 37 — 40

MICROTHERM FEEDER BOWL KITS 41

SKIMMER, MANTLE & BACK BLOCKS 42 — 43

STIRRERS 44

ROTOR SEGMENTS 45

CHANNEL BLOCKS 46 — 50

CEMENTS & POWDERS 51 —52

1

INDEX

2

PSR PREFORMS are pressed ceramic fibre shapes moulded to fitexactly the exterior contours of the orifice ring and the interior con-tours of the orifice ring holder. Made from 1300°C vacuum formedceramic fibre they provide a highly efficient form of orifice ring insula-tion, reducing heat losses from the ring and improving the thermalhomogeneity of the gob forming operation.

Formed to fit the precise shape of the orifice ring they also providesupport for the orifice ring over its entire exterior surface, reducingthe risk of orifice ring cracking through mechanical failure.

Each PREFORM can also be supplied with an optional ceramic fibregasket. The gasket is placed directly onto the top of the orifice ringwithout the need for luting cement. Adhesive tape can be used tokeep the gasket in place prior to installation.

Set-up time is reduced to seconds, with an orifice ring assembly thatis neat and secure, eliminating the hazards of deterioration duringstorage or movement of the pack during installation.

Advantages of PSR PREFORMS.

• Improved insulation value and lower heat losses.• Improved thermal homogeneity of the gob.• Better support for the orifice ring.• Quick set-up time.• No messy powder or bulk insulation fill.• Easier installation of assembled orifice ring.

How to order

PSR PREFORMS are made to fit exactly the exterior shape andcontour of PSR's orifice rings and the interior shape and contour ofstandard orifice ring holders. The PREFORM and gasket part numbersare detailed against the orifice ring part number.

PREFORMS

3

PSR forehearth systems and PSRfeeder expendables—theperfect combination for goodglass conditioning andproduction efficiency.

4

PSR bonded refractory parts—long life solutions for thefurnace, feeder and forehearth.

5

Dimension ‘X’ Part Holder Gasket Inches mm Number Number PREFORM Number

Metric conversions are to the nearest metric equivalents. Actual diameters are imperial.

These Orifice Rings are an improved design requiring the use of only 4orifice ring holders for the complete range.

Standard pack - 10 pieces


5/16 8 144-1534011/32 8.5 144-153413/8 9.5 144-1534213/32 10.5 144-153437/16 11 144-1534415/32 12 144-153451/2 12.5 144-1534617/32 13.5 144-153479/16 14.5 144-1534819/32 15 144-15349 Steel5/8 16 144-15350 144-1333 5S-001 LG-5S-0121/32 16.5 144-15351 Stainless11/16 17.5 144-15352 144-1436323/32 18 144-153533/4 19 144-1535425/32 20 144-1535513/16 20.5 144-1535627/32 21.5 144-153577/8 22 144-1535829/32 23 144-1535915/16 24 144-1536031/32 24.5 144-15361

1 25.5 144-1536211/16 27 144-1536311/8 28.5 144-1536413/16 30 144-1536511/4 31.5 144-1536615/16 33.5 144-1536713/8 35 144-15368 Steel17/16 36.5 144-15369 144- 1337 5S- 002 LG-5S-0111/2 38 144-15370 Stainless19/16 39.5 144-15371 144- 1436515/8 41.5 144-15372111/16 43 144-1537313/4 44.5 144-15374113/16 46 144-1537517/8 47.5 144-15376115/16 49 144-15377

2 51 144-1537821/16 52 144-1537921/8 54 144-1538023/16 56 144-1538121/4 57 144-1538225/16 59 144-1538323/8 60 144-15384 Steel27/16 62 144-15385 144 - 1341 5S- 003 LG-5S- 0121/2 63 144-15386 Stainless29/16 65 144-15387 144- 1436725/8 67 144-15388211/16 68 144-1538923/4 70 144-15390213/16 71 144-1539127/8 73 144-15392215/16 75 144-15393

3 76 144-1539431/16 78 144-1539531/8 79 144-1539633/16 81 144-1539731/4 83 144-1539835/16 84 144-1539933/8 86 144-1540037/16 87 144-1540131/2 89 144-15402 Steel39/16 90 144-15403 144-10330 5S- 004 LG-5S-0135/8 92 144-15404 Stainless311/16 94 144-15405 144-1437033/4 95 144-15406313/16 97 144-1540737/8 98 144-15408315/16 100 144-15409

4 102 144-1541041/16 103 144-1541141/8 105 144-1541243/16 106 144-1541341/4 108 144-1541445/16 110 144-1541543/8 111 144-1541647/16 113 144-1541741/2 114 144-15418

XORIFICE RINGS5" Single GobNew Type

6



5/16 8 144-1025311/32 8.5 144-102543/8 9.5 144-1025513/32 10.5 144-102567/16 11 144-1025715/32 12 144-102581/2 12.5 144-10259 Steel17/32 13.5 144-10260 144-1332 5S-005 LG5S-019/16 14.5 144-10261 Stainless19/32 15 144-10262 144-143625/8 16 144-1026321/32 16.5 144-1026411/16 17.5 144-1026523/32 18 144-102663/4 19 144-1016425/32 20 144-10267 Steel13/16 20.5 144-10268 144- 1333 5S-007 LG5S-0127/32 21.5 144-10269 Stainless7/8 22 144-10270 144- 1436329/32 23 144-1027115/16 24 144-1027231/32 24.5 144-10273

1 25.5 144-1027411/16 27 144-1027511/8 28.5 144-10276 Steel13/16 30 144-10277 144- 1335 5S-008 LG5S-0111/4 31.5 144-10278 Stainless15/16 33.5 144-10279 144- 1436413/8 35 144-1028017/16 36.5 144-10281

11/2 38 144-1028219/16 39.5 144-10283 Steel15/8 41.5 144-10165 144 - 1337 5S-010 LG5S-01111/16 43 144-10284 Stainless13/4 44.5 144-10285 144- 14365113/16 46 144-1028617/8 47.5 144-10287115/16 49 144-10288

2 51 144-102892 1/16 52 144-102902 1/8 54 144-10291 Steel2 3/16 56 144-10292 144- 1339 5S-012 LG5S-0121/4 57 144-10293 Stainless25/16 59 144-10294 144- 1436623/8 60 144-1029527/16 62 144-10296

21/2 63 144-1029729/16 65 144-1029825/8 67 144-10299 Steel 211/16 68 144-10300 144- 1341 5S-014 LG5S-0123/4 70 144-10301 Stainless213/16 71 144-10302 144- 1436727/8 73 144-10303215/16 75 144-10304

3 76 144-1030531/16 78 144-1030631/8 79 144-10307 Steel33/16 81 144-10308 144- 1343 5S-016 LG5S-0131/4 83 144-10309 Stainless35/16 84 144-10310 144- 1436833/8 86 144-1031137/16 87 144-1031231/2 89 144-10313 Steel39/16 90 144-10314 144-1345 5S-018 LG5S-0135/8 92 144-10315 Stainless311/16 94 144-10316 144-1436933/4 95 144-10317313/16 97 144-1031837/8 98 144-10319315/16 100 144-10320

4 102 144-1032141/16 103 144-1032241/8 105 144-10323 Steel43/16 106 144-10324 144- 10330 5S-020 LG5S-0141/4 108 144-10325 Stainless45/16 110 144-10326 144- 1437043/8 111 144-1032747/16 113 144-1032841/2 114 144-10329

X



ORIFICE RINGS5" Single GobOld Type

7

3 76 58-253331/16 78 58-316331/8 79 58-2534 194-8733/16 81 58-3164 group 7 7S- 107 LG-7S-0331/4 83 58-253533/8 86 58-2536

31/2 89 58-253735/8 92 58-2538 194-8733/4 95 58-2539 group 8 7S- 108 LG-7S-0337/8 98 58-2540

4 102 58-254141/8 105 58-2542 194-8741/4 108 58-2543 group 9 7S- 109 LG-7S-0343/8 111 58-2544

41/2 114 58-254545/8 117 58-2546 194-8743/4 121 58-2547 group 10 7S- 110 LG-7S-0347/8 124 58-2548

5 127 58-254951/8 130 58-2550 194-8751/4 133 58-2551 group 11 7S- 111 LG-7S-0353/8 137 58-2552

51/2 140 58-255355/8 143 58-2554 194-8753/4 146 58-2555 group 12 7S- 112 LG-7S-0357/8 149 58-2556

6 152 58-255761/8 156 58-2558 194-8761/4 159 58-2559 group 13 7S- 113 LG-7S-0363/8 162 58-256061/2 165 58-2561

ORIFICE RINGS7" Single Gob


1/2 12.5 58-30129/16 14.5 58-30135/8 16 58-3014 194-8711/16 17.5 58-3015 group 1 7S- 101 LG-7S-033/4 19 58-301613/16 20.5 58-30177/8 22 58-301815/16 24 58-30191 25.5 58-3020 194-8711/16 27 58-3021 group 2 7S- 102 LG-7S-0311/8 28.5 58-302213/16 30 58-3023

11/4 31.5 58-2662 194-8715/16 33.5 58-3041 group 3 7S- 103 LG-7S-0313/8 35 58-266317/16 36.5 58-294911/2 38 58-266419/16 39.5 58-2950

15/8 41.5 58-2665111/16 43 58-295113/4 44.5 58-2666 194-87113/16 46 58-2952 group 4 7S- 104 LG-7S-0317/8 47.5 58-2667115/16 49 58-2953

2 51 58-252521/16 52 58-295421/8 54 58-252623/16 56 58-2955 194-8721/4 57 58-2527 group 5 7S- 105 LG-7S-0325/16 59 58-295623/8 60 58-252827/16 62 58-3158

21/2 63 58-252929/16 65 58-315925/8 67 58-2530 194-87211/16 68 58-3160 group 6 7S- 106 LG-7S-0323/4 70 58-2531213/16 71 58-316127/8 73 58-2532215/16 75 58-3162


Metric conversions are to the nearest metric equivalents.Actual diameters are imperial.


X

8

13/8 35 503-581511/2 38 503-581615/8 41.5 503-581713/4 44.5 503-5662113/16 46 503-566317/8 47.5 503-5664115/16 49 503-56652 51 503-5666 503-10821/16 52 503-5667 group 1 10S- 201 LG-10-0521/8 54 503-566823/16 56 503-566921/4 57 503-567025/16 59 503-567123/8 60 503-567227/16 62 503-567321/2 63 503-567429/16 65 503-5675

ORIFICE RINGS10" Single Gob


25/8 67 503-5676211/16 68 503-567723/4 70 503-5678213/16 71 503-567927/8 73 503-5680215/16 75 503-56813 76 503-5682 503-10831/16 78 503-5683 group 2 10S-203 LG-10-0531/8 79 503-568433/16 81 503-568531/4 83 503-568635/16 84 503-568733/8 86 503-568837/16 87 503-5689




X

9

3/8 9.5 81-38487/16 11 81-38491 5/32 12 81-3850 Steel1/2 12.5 81-3851 81-309 5D- 301 LG-5D-011 7/32 13.5 81-3852 group19/16 14.5 81-3853 Stainless1 9/32 15 81-3854 81-2975/8 16 81-3855 group 121/32 16.5 81-385611/16 17.5 81-385723/32 18.5 81-38583/4 19 81-385925/32 20 81-3860 Steel13/16 20.5 81-3861 81-309 5D- 302 LG-5D-0127/32 21.5 81-3862 group 27/8 22 81-3863 Stainless29/32 23 81-3864 81-29715/16 24 81-3865 group 231/32 24.5 81-38661 25.5 81-3867

11/16 27 81-3868 Steel11/8 28.5 81-3869 81-309 group 3 5D- 303 LG-5D-0113/16 30 81-3870 Stainless 11/4 31.5 81-3871 81-297 group 3

15/16 33.5 81-3872 Steel 13/8 35 81-3873 81-309 5D- 304 LG-5D-0117/16 36.5 81-3874 Group 411/2 38 81-3875 Stainless19/16 39.5 81-3876 81-29715/8 41.5 81-3877 Group 4

111/16 43 81-3878 Steel13/4 44.5 81-3879 81-309 Group 5 5D- 305 LG-5D-01113/16 46 81-3880 Stainless

81-297 Group 5


17/8 47.5 81-3881 Steel115/16 49 81-3882 81-309 Group 6 5D- 306 LG-5D-012 51 81-3883 Stainless 21/16 52 81-3884 81-297 Group 6

21/8 54 81-3885 Steel23/16 56 81-3886 81-309 Group 7 5D- 307 LG-5D-01

Stainless81-297 Group 7


ORIFICE RINGS5" Double GobNew Type3” (76mm) Centre Distance



X

X

3”

10

3/8 9.5 27/8 73 81-30367/16 11 27/8 73 81-303715/32 12 27/8 73 81-30381/2 12.5 27/8 73 81-303917/32 13.5 27/8 73 81-3040 144-213129/16 14.5 27/8 73 81-3041 Group 1 5D- 308 LG-5D-0119/32 15 27/8 73 81-30825/8 16 27/8 73 81-304221/32 16.5 27/8 73 81-308311/16 17.5 27/8 73 81-304323/32 18.5 27/8 73 81-30443/4 19 27/8 73 81-304525/32 20 27/8 73 81-308413/16 20.5 27/8 73 81-304627/32 21.5 27/8 73 81-3085 144-21312 5D- 309 LG-5D-017/8 22 27/8 73 81-3047 Group 229/32 23 27/8 73 81-308615/16 24 27/8 73 81-304831/32 24.5 27/8 73 81-30871 25.5 27/8 73 81-3049

11/16 27 27/8 73 81-305011/8 28.5 27/8 73 81-3051 144-21312 5D- 310 LG-5D-0113/16 30 27/8 73 81-2921 Group 311/4 31.5 27/8 73 81-2920

15/16 33.5 27/8 73 81-291913/8 35 27/8 73 81-284517/16 36.5 27/8 73 81-2846 144-21312 5D- 311 LG-5D-0111/2 38 27/8 73 81-2622 Group 419/16 39.5 27/8 73 81-284715/8 41.5 27/8 73 81-2848

Dimension ‘X’ Centre Distance ‘Y’ Part Holder PREFORM GasketInches mm Inches mm Number Number Number Number

111/16 43 3 76 81-284913/4 44.5 3 76 81-2850 144-21312113/16 46 3 76 81-2851 Group 5 5D- 312 LG-5D-01

17/8 47.5 3 76 81-2746115/16 49 3 76 81-2747 144-21312 5D- 313 LG-5D-012 51 3 76 81-2748 Group 621/16 52 3 76 81-2749

21/8 54 3 76 81-378423/16 56 3 76 81-3785 144-14162 5D- 314 LG-5D-01


ORIFICE RINGS5" Double GobOld Type



Y

X

X

11





3/8 9.5 81-38157/16 11 81-38161/2 12.5 81-3817 194-749/16 14.5 81-3818 Group 1 7D- 401 LG-7D-035/8 16 81-381911/16 17.5 81-38203/4 19 81-382113/16 20.5 81-38227/8 22 81-3823 194-7415/16 24 81-3824 Group 2 7D- 402 LG-7D-031 25.5 81-3825

11/16 27 81-382611/8 28.5 81-3827 194-7413/16 30 81-3828 Group 3 7D- 403 LG-7D-0311/4 31.5 81-3829

15/16 33.5 81-383013/8 35 81-383117/16 36.5 81-3832 194-7411/2 38 81-3833 Group 4 7D- 404 LG-7D-0319/16 39.5 81-383415/8 41.5 81-3835

111/16 43 81-3836 194-7413/4 44.5 81-3837 Group 5 7D- 405113/16 46 81-3838

17/8 47.5 81-3839115/16 49 81-38402 51 81-3841 194-7421/16 52 81-3842 Group 6 7D- 40621/8 54 81-3843

ORIFICE RINGS7" Double Gob3” Centre Distance

X

X

3”

12




These Orifice Rings are an improved design requiring the use of only 3orifice ring holders for the complete range. Old orifice ring holdersare compatible as indicated.


1/2 12.5 194-55889/16 14.5 194-55895/8 16 194-559011/16 17.5 194-5591 194-1413/4 19 194-5592 Group 1 7D- 407 LG-7D-0313/16 20.5 194-5593 (Holder7/8 22 194-5594 No. 194-7415/16 24 194-5595 Group 9 is also1 25.5 194-5596 compatible)11/16 27 194-559711/8 28.5 194-559813/16 30 194-5599

11/4 31.5 194-560015/16 33.5 194-560113/8 35 194-560217/16 36.5 194-560311/2 38 194-560419/16 39.5 194-560515/8 41.5 194-5606111/16 43 194-5607 194-14113/4 44.5 194-5608 Group 2 7D- 408 LG-7D-03113/16 46 194-5609 (Holder17/8 47.5 194-5610 No. 194-74115/16 49 194-5611 Group 14 is also2 51 194-5612 compatible)21/16 52 194-561321/8 54 194-561423/16 56 194-561521/4 57 194-561625/16 59 194-561723/8 60 194-561827/16 62 194-561921/2 63 194-562029/16 65 194-5621

25/8 67 194-5622 194-141211/16 68 194-5623 Group 3 7D- 410 LG-7D-0323/4 70 194-5624 (Holder213/16 71 194-5625 No. 194-7427/8 73 194-5626 Group 15 is also215/16 75 194-5627 compatible)

ORIFICE RINGS7" Double GobNew Design43/8 (111mm) Centre Distance

X

X

43/8”

13



ORIFICE RINGS7" Double GobOld Design43/8 " (111mm) Centre Distance



1/2 12.5 194-55349/16 14.5 194-55245/8 16 194-524411/16 17.5 194-5525 194-743/4 19 194-5245 Group 8 7D- 411 LG-7D-0313/16 20.5 194-55267/8 22 194-524615/16 24 194-55271 25.5 194-5247

11/16 27 194-552811/8 28.5 194-5248 194-7413/16 30 194-5529 Group 9 7D- 413 LG-7D-0311/4 31.5 194-5249

15/16 33.5 194-553013/8 35 194-5250 194-7417/16 36.5 194-5251 Group 10 7D- 414 LG-7D-0311/2 38 194-525219/16 39.5 194-5253

15/8 41.5 194-5254111/16 43 194-5255 194-7413/4 44.5 194-5256 Group 11 7D- 415 LG-7D-03113/16 46 194-5257

17/8 47.5 194-5258115/16 49 194-5259 194-742 51 194-5260 Group 12 7D- 416 LG-7D-032 1/16 52 194-5261

2 1/8 54 194-52622 3/16 56 194-5263 194-7421/4 57 194-5264 Group 13 7D- 417 LG-7D-0325/16 59 194-5265

23/8 60 194-526627/16 62 194-5267 194-7421/2 63 194-5268 Group 14 7D- 418 LG-7D-0329/16 65 194-5269

25/8 67 194-5415211/16 68 194-541623/4 70 194-5417 194-74213/16 71 194-5418 Group 15 7D- 419 LG-7D-0327/8 73 194-5531215/16 75 194-5532

X

X

43/8”

14



ORIFICE RINGS7" Double GobSolid Bridge Type43/8 " (111mm) Centre Distance



1/2 12.5 194-56879/16 14.5 194-56885/8 16 194-568911/16 17.5 194-5690 194-141 group 13/4 19 194-5691 (or 194-74-9) 7D- 407 LG-7D-0313/16 20.5 194-5692 modified7/8 22 194-5693 with cooling15/16 24 194-5694 pipe removed1 25.5 194-569511/16 27 194-569611/8 28.5 194-569713/16 30 194-5698

11/4 31.5 194-569915/16 33.5 194-570013/8 35 194-570117/16 36.5 194-570211/2 38 194-570319/16 39.5 194-570415/8 41.5 194-5705111/16 43 194-5706 194-141 Group 213/4 44.5 194-5707 (or 194-74-14) 7D- 408 LG-7D-03113/16 46 194-5708 modified 17/8 47.5 194-5709 with cooling115/16 49 194-5710 pipe removed2 51 194-571121/16 52 194-571221/8 54 194-571323/16 56 194-571421/4 57 194-571525/16 59 194-571623/8 60 194-571727/16 62 194-571821/2 63 194-571929/16 65 194-5720

25/8 67 194-5721 194-141 Group 3211/16 68 194-5722 (or 194-74-15) 7D- 410 LG-7D-0323/4 70 194-5723 modified213/16 71 194-5724 with cooling27/8 73 194-5725 pipe removed215/16 75 194-5726

43/8”X

X

15



3/4 19 115-796 81-2727/8 22 115-797 Group 17 7D- 420 LG-7D-031 25.5 115-798

11/8 28.5 115-799 81-27211/4 31.5 115-800 Group 18 7D- 421 LG-7D-03

13/8 35 115-80117/16 36.5 115-802 81-27211/2 38 115-803 Group 19 7D- 422 LG-7D-0319/16 39.5 115-804

15/8 41.5 115-805111/16 43 115-806 81-27213/4 44.5 115-807 Group 20 7D- 423 LG-7D-03113/16 46 115-808

17/8 47.5 115-571115/16 49 115-572 81-2722 51 115-573 Group 21 7D- 424 LG-7D-0321/16 52 115-574

21/8 54 115-57523/16 56 115-576 81-27221/4 57 115-577 Group 22 7D- 425 LG-7D-0325/16 59 115-588

23/8 60 115-58927/16 62 115-590 81-27221/2 63 115-591 Group 23 7D- 426 LG-7D-0329/16 65 115-592


These Orifice Rings are an obsolete design.


ORIFICE RINGS7" Double Gob43/8" (111mm) Centre Distance

43/8”

X

X

16





3/8 9.5 27/8 73 81-34377/16 11 27/8 73 81-34381/2 12.5 27/8 73 81-3439 81-2729/16 14.5 27/8 73 81-3440 Group 3 7D- 427 LG-7D-035/8 16 27/8 73 81-344111/16 17.5 27/8 73 81-34423/4 19 27/8 73 81-344313/16 20.5 27/8 73 81-3444 81-2727/8 22 27/8 73 81-3445 Group 4 7D- 428 LG-7D-0315/16 24 27/8 73 81-34461 25.5 27/8 73 81-3447

11/16 27 27/8 73 81-344811/8 28.5 27/8 73 81-3449 81-27213/16 30 27/8 73 81-3450 Group 5 7D- 429 LG-7D-0311/4 31.5 27/8 73 81-3451

15/16 33.5 27/8 73 81-345213/8 35 27/8 73 81-345317/16 36.5 27/8 73 81-3454 81-27211/2 38 27/8 73 81-3455 Group 6 7D- 430 LG-7D-0319/16 39.5 27/8 73 81-345615/8 41.5 27/8 73 81-3457

111/16 43 3 76 81-3458 81-27213/4 44.5 3 76 81-3459 Group 13 7D- 431 LG-7D-03113/16 46 3 76 81-3460

17/8 47.5 3 76 81-3461 81-272115/16 49 3 76 81-3462 Group 11 7D- 432 LG-7D-032 51 3 76 81-3463

21/16 52 3 76 81-347221/8 54 3 76 81-3473 81-27223/16 56 3 76 81-3474 Group 15 7D- 433 LG-7D-0321/4 57 3 76 81-3475

ORIFICE RINGS7" Double Gob


Y

X X

17




These Orifice Rings are an improved design requiring the use of onlyone orifice ring holder for the complete range.


11/4 31.5 503-5766 10D- 50115/16 33.5 503-5765 10D- 50113/8 35 503-5764 10D- 50117/16 36.5 503-5751 10D- 50111/2 38 503-5750 10D- 50119/16 39.5 503-5749 10D- 50115/8 41.5 503-5748 10D- 501111/16 43 503-5747 10D- 50113/4 44.5 503-5746 10D- 501113/16 46 503-5745 10D- 50117/8 47.5 503-5743 10D- 501115/16 49 503-5742 10D- 5012 51 503-5735 10D- 50121/16 52 503-5734 10D- 50121/8 54 503-5733 503-114 10D- 50123/16 56 503-5732 Group 1 10D- 50121/4 57 503-5731 or 10D- 503 LG-10-0525/16 59 503-5730 10D- 50323/8 60 503-5729 503-130 10D- 50327/16 62 503-5728 Group 4 10D- 50321/2 63 503-5727 10D- 50329/16 65 503-5726 10D- 50325/8 67 503-5719 10D- 503211/16 68 503-5720 10D- 50323/4 70 503-5721 10D- 503213/16 71 503-5722 10D- 50327/8 73 503-5723 10D- 503215/16 75 503-5724 10D- 5033 76 503-5725 10D- 50331/16 78 503-5793 10D- 50331/8 79 503-5794 10D- 50331/4 83 503-5795 10D- 50333/8 86 503-5796 10D- 503

ORIFICE RINGS10" Double GobNew Design43/8“ (111mm) Centre Distance

43/8”X

X

18



ORIFICE RINGS10" Double GobOld Design43/8“ (111mm) Centre Distance




17/16 36.5 503-570711/2 38 503-564719/16 39.5 503-564815/8 41.5 503-5649111/16 43 503-565013/4 44.5 503-5578 503-93 10D- 505 LG-10-05113/16 46 503-5579 Group 117/8 47.5 503-5580115/16 49 503-55812 51 503-558221/16 52 503-558321/8 54 503-5584

23/16 56 503-558621/4 57 503-558725/16 59 503-5588 503-93 10D- 508 LG-10-0523/8 60 503-5589 Group 227/16 62 503-559021/2 63 503-559129/16 65 503-5592

25/8 67 503-5699211/16 68 503-570023/4 70 503-5701 503-93 10D- 510 LG-10-05213/16 71 503-5702 Group 3 27/8 73 503-5703215/16 75 503-57043 76 503-5705

43/8”X

X

19





7/8 22 501-9109 10D- 5121 25.5 503-6574 10D- 51211/16 27 503-6575 10D- 51211/8 28.5 503-6576 10D- 51213/16 30 503-6577 10D- 51211/4 31.5 503-6578 10D- 51215/16 33.5 503-6579 10D- 51213/8 35 503-6580 10D- 51217/16 36.5 503-6581 10D- 51211/2 38 503-6582 10D- 51219/16 39.5 503-6583 10D- 51215/8 41.5 503-6584 10D- 512111/16 43 503-6585 10D- 51213/4 44.5 503-6586 10D- 512113/16 46 503-6587 10D- 51217/8 47.5 503-6588 10D- 512115/16 49 503-6589 10D- 5122 51 503-6590 555-2547 10D- 512 LG-10D-0521/16 52 503-6591 10D- 51221/8 54 503-6592 10D- 51223/16 56 503-6593 10D- 51221/4 57 503-6594 10D- 51425/16 59 503-6595 10D- 51423/8 60 503-6596 10D- 51427/16 62 503-6597 10D- 51421/2 63 503-6598 10D- 51429/16 65 503-6599 10D- 51425/8 67 503-6600 10D- 514211/16 68 503-6601 10D- 51423/4 70 503-6602 10D- 514213/16 71 503-6603 10D- 51427/8 73 503-6604 10D- 514215/16 75 503-6605 10D- 5143 76 503-6606 10D- 51431/16 78 503-6607 10D- 51431/8 79 503-6608 10D- 51431/4 83 503-6609 10D- 51433/8 86 503-6610 10D- 514

ORIFICE RINGS10" Double GobSolid Bridge Type43/8“ (111mm) Centre Distance

43/8”

XX

20





11/4 31.5 515-615215/16 33.5 515-615313/8 35 515-615417/16 36.5 515-615511/2 38 515-6156 10D- 51619/16 39.5 515-6157 10D- 51615/8 41.5 515-6158 10D- 516111/16 43 515-6159 10D- 51613/4 44.5 515-5081 10D- 516113/16 46 515-5082 10D- 51617/8 47.5 515-5083 10D- 516115/16 49 515-5084 10D- 5162 51 515-5085 10D- 51621/16 52 515-5086 10D- 51621/8 54 515-5087 10D- 51623/16 56 515-5088 10D- 51621/4 57 515-5089 10D- 52025/16 59 515-5090 10D- 52023/8 60 515-5091 515-11 10D- 520 LG-10D-0527/16 62 515-5137 10D- 52021/2 63 515-5008 10D- 52029/16 65 515-5009 10D- 52025/8 67 515-5010 503-130 10D- 520211/16 68 515-5011 Group 6 10D- 52023/4 70 515-5012 10D- 520213/16 71 515-5013 10D- 52027/8 73 515-5014 10D- 520215/16 75 515-5015 10D- 5203 76 515-5016 10D- 52031/16 78 515-5017 10D- 52031/8 79 515-5018 10D- 52033/16 81 515-5019 10D- 52031/4 83 515-502035/16 84 515-502133/8 86 515-502237/16 87 515-502331/2 89 515-502439/16 90 515-502535/8 92 515-5026311/16 93 515-502733/4 95 515-5028

ORIFICE RINGS10" Double Gob5" (127mm) Centre Distance

5”

XX

21





21/16 52 515-609721/8 54 515-606123/16 56 515-606021/4 57 515-605925/16 59 515-605823/8 60 515-6057 515-E-212 12D- 601 LG-12-0627/16 62 515-605621/2 63 515-605529/16 65 515-605425/8 67 515-6053211/16 68 515-605223/4 70 515-6051

ORIFICE RINGS12" Double Gob43/8" (111mm) Centre Distance 43/8”

X X

22





3/8 9.5 144-150937/16 11 144-150941/2 12.5 144-150959/16 14.5 144-150965/8 16 144-15097 144-21568 8T- 701 LG-8-0411/16 17.5 144-15098 Group 13/4 19 144-1509913/16 20.5 144-151007/8 22 144-1510115/16 24 81-63311 25.5 81-633211/16 27 81-633311/8 28.5 81-633413/16 30 81-6335 144-21568 8T- 703 LG-8-0411/4 31.5 81-6336 Group 215/16 33.5 81-633713/8 35 81-633817/16 36.5 81-633911/2 38 81-6329

ORIFICE RINGS8" Triple Gob3" (76mm) Centre Distance

3”

3”

X X X

23





11/4 31.5 503-586015/16 33.5 503-586113/8 35 503-586217/16 36.5 503-586311/2 38 503-586419/16 39.5 503-586515/8 41.5 503-5866111/16 43 503-586713/4 44.5 503-5868 503-130 10T- 801 LG-10-05113/16 46 503-5869 Group 317/8 47.5 503-5870115/16 49 503-58712 51 503-587221/16 52 503-585121/8 54 503-585223/16 56 503-585321/4 57 503-5854

ORIFICE RINGS10" Triple GobNew Design3" (76mm) Centre Distance

3”

3”

X X X

24



ORIFICE RINGS10" Triple GobOld Design3" (76mm) Centre Distance


These orifice rings are an obsolete design.


11/4 31.5 503-564015/16 33.5 503-564113/8 35 503-564217/16 36.5 503-564311/2 38 503-544319/16 39.5 503-544415/8 41.5 503-5445111/16 43 503-544613/4 44.5 503-5365 503-47 10T- 803 LG-10-05113/16 46 503-5366 Group 117/8 47.5 503-5367115/16 49 503-54472 51 503-5448

3”

3”

X X X

25





11/4 31.5 503-647815/16 33.5 503-647913/8 35 503-648017/16 36.5 503-648111/2 38 503-648219/16 39.5 503-648315/8 41.5 503-6484111/16 43 503-648513/4 44.5 503-6486 503-223 10T- 807 LG-10-05113/16 46 503-6487 Group 317/8 47.5 503-6488115/16 49 503-64892 51 503-649021/16 52 503-649121/8 54 503-649223/16 56 503-649321/4 57 503-6494

ORIFICE RINGSTriple Gob Solid Bridge Type10” Spout3" (76mm) Centre Distance

3”

3”

X X X

26





111/16 43 515-601413/4 44.5 515-6013113/16 46 515-601217/8 47.5 515-6011115/16 49 515-60102 51 515-600921/16 52 515-6008 515-E-211 12T- 901 LG-12-0621/8 54 515-6007 Group 123/16 56 515-600621/4 57 515-600525/16 59 515-600423/8 60 515-600327/16 62 515-600221/2 63 515-6001

ORIFICE RINGS12" Triple Gob43/8" (111mm) Centre Distance

43/8”

43/8”

X X X

27

SPOUT ACCESSORIESNote: Baffle type rear spout covers provide a par-tial separation between the spout andequalising section zones.

144 feeder with 5" stationary tube1 off spout burner LH 144-130941 off spout burner RH 144-130951 off spout burner centre 144-130961 off front spout cover 144-50311 off rear spout cover 144-50232 off spout cover insulation 144-5027

144 feeder with 6" stationary tube1 off spout burner LH 144-130941 off spout burner RH 144-130951 off spout burner centre 144-130961 off front spout cover 144-124321 off rear spout cover 144-124302 off spout cover insulation 144-12431

144 feeder with 7" stationary tube1 off spout burner LH 144-130941 off spout burner RH 144-130951 off spout burner centre 144-130961 off front spout cover 144-141391 off rear spout cover 144-14140

144 feeder with 73/4" stationary tube1 off spout burner LH 144-130941 off spout burner RH 144-130951 off spout burner centre 144-130961 off front spout cover 144-150861 off rear spout cover 144-15085

81 - 16" wide feeder with 6" revolving tube1 off spout burner LH 81-26531 off spout burner RH 81-26521 off spout burner centre 81-26541 off front spout cover 81-38121 off rear spout cover 81-3811



81 - 16" wide feeder with 10" revolving tube1 off spout burner LH 81-26531 off spout burner RH 81-2652 1 off spout burner centre 81-26541 off front spout cover 81-62151 off rear spout cover 81-6219

81 - 16" wide feeder with 6" stationary tube1 off spout burner LH 81-26531 off spout burner RH 81-26521 off spout burner centre 81-26541 off front spout cover 81-19991 off rear spout cover 81-1998

81 - 16" wide feeder with 7" stationary tube1 off spout burner LH 81-26531 off spout burner RH 81-26521 off spout burner centre 81-26541 off front spout cover 81-34331 off rear spout cover 81-3434

81 - 18" wide feeder with 7" revolving tube1 off spout burner LH 81-40331 off spout burner RH 81-40341 off spout burner centre 81-40321 off front spout cover 194-50061 off rear spout cover 194-5578 (Baffle)

194-5005 (Plain)

81 - 18" wide feeder with 8" revolving tube1 off spout burner LH 81-40331 off spout burner RH 81-40341 off spout burner centre 81-40321 off front spout cover 81-6214 1 off rear spout cover SC83 (Baffle)

81-6218 (Plain)

81 - 18" wide feeder with 10" revolving tube1 off spout burner LH 81-40331 off spout burner RH 81-40341 off spout burner centre 81-40321 off front spout cover 81-6215 1 off rear spout cover SC87 (Baffle)

81-6220 (Plain)

81 - 18" wide feeder with 7" stationary tube1 off spout burner LH 81-40331 off spout burner RH 81-40341 off spout burner centre 81-40321 off front spout cover 81-4035 1 off rear spout cover 81-4173 (Baffle)

81-4036 (Plain)

194 feeder with 7" revolving tube1 off spout burner LH 194-5010 1 off spout burner RH 194-5008 1 off spout burner centre 194-5009 1 off front spout cover 194-5006 1 off rear spout cover 194-5578 (Baffle)

194-5005 (Plain)

28

503 - 22" wide feeder with 8" stationary tube1 off spout burner LH 58-23651 off spout burner RH 58-23641 off spout burner centre 115-5201 off spout burner centre 115-5212 off front spout cover 503-66171 off rear spout cover 503-6618 (Baffle)

503-6635 (Plain)

503 - 22" wide feeder with 10" stationary tube1 off spout burner LH 58-23651 off spout burner RH 58-23641 off spout burner centre 115-5201 off spout burner centre 115-5212 off front spout cover 503-59401 off rear spout cover 503-5939 (Baffle)

503-6568 (Baffle)

515 feeder with 503 spout with 10" revolving tube1 off spout burner LH 515-50051 off spout burner RH 515-50041 off spout burner centre 515-50031 off spout burner centre 515-50022 off front spout cover 503-51341 off rear spout cover 503-5873 (Baffle)

503-5135 (Plain)

515 with 10" revolving tube1 off spout burner LH 515-50051 off spout burner RH 515-50041 off spout burner centre 515-50031 off spout burner centre 515-50022 off front spout cover 503-51341 off rear spout cover 503-5873 (Baffle)

503-5135 (Plain)

515 with 11" revolving tube1 off spout burner LH 515-50051 off spout burner RH 515-50041 off spout burner centre 515-50031 off spout burner centre 515-50022 off front spout cover 113-7451 off rear spout cover 515-5145 (Baffle)

515-5142 (Plain)

515 with 12" revolving tube1 off spout burner LH 515-50051 off spout burner RH 515-50041 off spout burner centre 515-50031 off spout burner centre 515-50022 off front spout cover 515-60661 off rear spout cover 515-6067 (Plain)

515-5142 (Baffle)

555 feeder with 81 spout 14" wide with 5" sta-tionary tube1 off spout burner LH 81-4526 1 off spout burner RH 81-4524 1 off spout burner centre 81-4525 1 off front spout cover 81-45501 off rear spout cover 81-4558 1 off Spout cover insulation front 81-45461 off Spout cover insulation rear 81-4554

115 feeder with 7" revolving tube1 off spout burner LH 58-2365 1 off spout burner RH 58-2364 1 off spout burner centre 115-520 1 off spout burner centre 115-5212 off front spout cover 115-20381 off rear spout cover SC92 (Baffle)

115-2042 (Plain)

115 feeder with 8" revolving tube1 off spout burner LH 58-2365 1 off spout burner RH 58-2364 1 off spout burner centre 115-520 1 off spout burner centre 115-5212 off front spout cover 115-2039 1 off rear spout cover SC88 (Baffle)

115-2041(Plain)

115 feeder with 10" revolving tube1 off spout burner LH 58-2365 1 off spout burner RH 58-2364 1 off spout burner centre 115-520 1 off spout burner centre 115-5212 off front spout cover 115-2037 1 off rear spout cover 503-5873(Baffle)

115-2040 (Plain)

115 feeder with 7" stationary tube1 off spout burner LH 58-2365 1 off spout burner RH 58-2364 1 off spout burner centre 115-520 1 off spout burner centre 115-5212 off front spout cover 115-511 1 off rear spout cover 115-933 (Baffle)

115-506 (Plain)

503 - 22" wide feeder with 7" revolving tube1 off spout burner LH 58-23651 off spout burner RH 58-23641 off spout burner centre 115-5201 off spout burner centre 115-5212 off front spout cover 503-53911 off rear spout cover 503-5899 (Baffle)

503-5392 (Plain)

503 - 22" wide feeder with 8" revolving tube1 off spout burner LH 58-23651 off spout burner RH 58-23641 off spout burner centre 115-5201 off spout burner centre 115-5212 off front spout cover 503-6118 1 off rear spout cover 503-6120 (Baffle)

503-6119 (Plain)

503 - 22" wide feeder with 10" revolving tube1 off spout burner LH 58-23651 off spout burner RH 58-23641 off spout burner centre 115-5201 off spout burner centre 115-5212 off front spout cover 503-51341 off rear spout cover 503-5873 (Baffle)

503-5135 (Plain)

SPOUT ACCESSORIES Continued

29

SPOUT ACCESSORIES Continued

555 feeder with 81 spout 14" wide with 6" sta-tionary tube1 off spout burner LH 81-4526 1 off spout burner RH 81-4524 1 off spout burner centre 81-4525 1 off front spout cover 81-45511 off rear spout cover 81-4559 1 off Spout cover insulation front 81-45471 off Spout cover insulation rear 81-4555

555 feeder with 81 spout 18" wide with 5"revolving tube1 off spout burner LH 81-4543 1 off spout burner RH 81-4544 1 off spout burner centre 81-4545 1 off front spout cover 81-45501 off rear spout cover 81-4558 1 off Spout cover insulation front 81-45461 off Spout cover insulation rear 81-4554




555 feeder with 503 spout 7" revolving tube1 off spout burner LH 555-12451 off spout burner RH 555-12441 off spout burner centre 555-12432 off front spout cover 555-16701 off rear spout cover 555-1666 6 off Spout cover insulation front555-16683 off Spout cover insulation rear555-1672

555 feeder with 503 spout 8" revolving tube1 off spout burner LH 555-12451 off spout burner RH 555-12441 off spout burner centre 555-12432 off front spout cover 555-16691 off rear spout cover 555-1665 6 off Spout cover insulation front 555-16673 off Spout cover insulation rear 555-1671





30

SPOUTS

144 standard 144-704 5" (127 mm) 6" (152 mm) 14" (356 mm) raised144 standard 144-14178 angular shearing 5" (127 mm) 6" (152 mm) 14" (356 mm) raised144 standard 144-14179 5" (127 mm) 6" (152 mm) 14" (356 mm) flat 144 standard 144-15145 for 8" TG 7 3/4" (197 mm) 6" (152 mm) 14" (356 mm) flat

144 deep 29-890 5" (127 mm) 10" (254 mm) 14" (356 mm) raised144 deep 29-600 5" (127 mm) 10" (254 mm) 14" (356 mm) flat 144 deep 144-14180 6/5" (152/127 mm) 10" (254 mm) 14" (356 mm) raised144 deep 144-14177 6/5" (152/127 mm) 10" (254 mm) 14" (356 mm) flat 144 deep 144-15030 for 7" DG 7" (178 mm) 10" (254 mm) 16" (406 mm) flat

81 standard 81-3795 16" offset 7" (178 mm) 71/4 (184 mm) 16" (406 mm) Flat81 standard 81-3793 16" offset 6/5" (152/127 mm) 71/4 (184 mm) 16" (406 mm) raised 81 standard 81-4444 16" offset 8/7" (203/178 mm) 71/4 (184 mm) 16" (406 mm) Flat

81 standard 81-6362 (81-4537) 18"centre line 7" (178 mm) 71/4 (184 mm) 18" (457 mm) Flat81 standard 81-4487 18"centre line 8" (203 mm) 71/4 (184 mm) 18" (457 mm) Flat

81 deep 81-3907 16" offset 6/5" (152/127mm) 91/2"(241 mm) 16" (406mm) Raised81 deep 81-3794 16" offset 6/5" (152/127mm) 91/2"(241 mm) 16" (406mm) flat 81 deep 81-3908 16" offset 7" (178 mm) 91/2" (241 mm) 16" (406mm) Raised81 deep 81-3792 16" offset 7" (178 mm) 91/2" (241 mm) 16" (406mm) flat 81 deep 81-4381 16" offset 8/7" (203/178mm) 91/2 "(241 mm) 16" (406mm) flat

81 deep 81-4571 16" centreline 6/5" (152/127mm) 95/16"(236 mm) 16" (406mm) flat

81 deep 81-4015 18" centreline 7" (178 mm) 10" (254 mm) 18" (457mm) flat 81 deep 81-6342 18" centreline 8" (203 mm) 10" (254 mm) 18" (457mm) flat 81 deep 81-4342 18" centreline 8/7" (203/178 mm) 10" (254 mm) 18" (457mm) flat

194 standard 194-5224 7" (178 mm) 71/4" (184 mm) 18" (457 mm) flat194 standard 81-6341 8" (203 mm) 71/4" (184 mm) 18" (457 mm) flat

194 deep 194-5223 7" (178 mm) 10" (254 mm) 18" (457 mm) flat194 deep 194-5636 8/7" (203/178 mm) 10" (254 mm) 18" (457 mm) flat

115 115-870 deep only 7" (178mm) 11 5/16" (287mm) 22" (559 mm) flat

503 standard 503-6231 10" (254 mm) 71/4" (184 mm) 22" (559 mm) flat

503 deep 503-5400 7" (178 mm) 11 5/16" (287 mm) 22" (559 mm) flat503 deep 503-5963 8/7" (203/178 mm) 11 5/16" (287 mm) 22" (559 mm) flat503 deep 503-6616 8/7" (203/178 mm) 11 5/16" (287 mm) 22" (559 mm) flat503 deep 503-5080 10" (254 mm) 11 5/16" (287 mm) 22" (559 mm) flat503 deep 503-3845 reinforced 10" (254 mm) 11 5/16" (287 mm) 22" (559 mm) flat503 deep 503-5938 for use with rotors 10" (254 mm) 11 5/16" (287 mm) 22" (559 mm) flat503 deep 501-6210 11/10" (279/254 mm) 11 5/16" (287 mm) 22" (559 mm) flat

Feeder Part No. Remarks Throat (T) Depth (D) Width (W) Tube Seat

W

D

T

▼

▼

▼

▼

▼▼

31

515 515-5133 shallow entry 10" (254 mm) 11 5/16" (287 mm) 24" (610 mm) flat515 515-5139 shallow entry 12" (305 mm) 11 5/16" (287 mm) 24" (610 mm) flat515 515-5164 narrow entry 8/7" (203/178 mm) 13" (330 mm) 22" (559 mm) flat515 515-6149 same as 515-5001 11/10" (279/254 mm) 13" (330 mm) 24" (610 mm) flat515 515-6150 10" (254 mm) 13" (330 mm) 24" (610 mm) flat515 515-6015 12" (305 mm) 13" (330 mm) 24" (610 mm) flat

81/555 standard 81-4522 14" wide 5" (127 mm) 71/4" (184 mm) 14" (356 mm) flat81/555 standard 81-4523 14" wide 6/5" (152/127 mm) 71/4" (184 mm) 14" (356 mm) flat81/555 standard 81-4660 14" wide 8" (203 mm) 71/4" (184 mm) 14" (356 mm) flat

81/555 deep 81-4577 14" wide 5" (127 mm) 10" (254 mm) 14" (356 mm) flat81/555 deep 81-4578 14" wide 6/5" (152/127 mm) 10" (254 mm) 14" (356 mm) flat

81/555 standard 81-4535 18" wide 5" (127 mm) 71/4" (184 mm) 18" (457 mm) flat81/555 standard 81-6362 (81-4537) 18" wide 7" (178 mm) 71/4" (184 mm) 18" (457 mm) flat81/555 standard 81-4538 18" wide 8" (203 mm) 71/4" (184 mm) 18" (457 mm) flat81/555 standard 81-4539 18" wide 8/7" (203/178 mm) 71/4" (184 mm) 18" (457 mm) flat

81/555 deep 81-4572 18" wide 5" (127 mm) 10" (254 mm) 18" (457 mm) flat81/555 deep 81-4635 18" wide 6/5" (152/127 mm) 10" (254 mm) 18" (457 mm) flat81/555 deep 81-4573 18" wide 7" (178 mm) 10" (254 mm) 18" (457 mm) flat81/555 deep 81-4574 18" wide 8" (203 mm) 10" (254 mm) 18" (457 mm) flat81/555 deep 81-4575 18" wide 8/7" (203/178 mm) 10" (254 mm) 18" (457 mm) flat

Feeder Part No. Remarks Throat (T) Depth (D) Width (W) Tube Seat

SPOUTS Continued

W

T

D

▼

▼

▼

▼

32

81-INS-4015-20 81 deep 7” (178mm) (81-4015)194-INS-5223-20 194 deep 7” (178mm) (194-5223)81-INS-6342-21 81 deep 8” (203mm) (81-6342)81-INS-4487-31 81 standard 8” (203mm) (81-4487)81-INS-6341-31 194 standard 8” (203mm) (81-6341)503-INS-5400-01 503 7” (178mm) (503-5400)503-INS-5080-02 503 10” (254mm) (503-5080)503-INS-5938-02 503 10” (254mm) (503-5938)515-INS-5133-02 515 10” (254mm) (515-5133)515-INS-6150-02 515 10” (254mm) (515-6150)515-INS-6149-06 515 11”/10” (279/254mm) (515-6149)

Inserted Spout Equivalent to Single Piece Spout Assembly Number Type Throat Diameter Part Number

INSERTED TYPE SPOUTS

Inserted type spouts are supplied as a 2-piece assembly comprising a spout bowl inPSR-315 with a separate spout insert in 32%ZrO2 fused cast refractory material.

They are supplied pre-assembled and mortared together using a high-grade refrac-tory cement. The assembled unit is held together by a specially designed clamp thatcan be easily removed after installation in the spout casing.

Inserted spouts are only offered in a limited range of sizes as detailed below.

Spout Bowl

Insert

33

STANDARD TUBESPlain

144-783 5" (127 mm) 17" (432 mm) 144 standard with curb144-3971 5" (127 mm) 18" (457 mm) 144 standard without curb144-2659 5" (127 mm) 211/2" (546 mm) 144 deep144-12949 6" (152 mm) 17" (432 mm) 144 standard with curb144- 13124 6" (152 mm) 18" (457 mm) 144 standard without curb144-11649 6" (152 mm) 211/2" (546 mm) 144 deep/ 81 standard81-4198 6" (152 mm) 23" (584 mm) 81 standard81- 3951 6" (152 mm) 24" (610 mm) 81 deep with curb81- 3418 6" (152 mm) 241/2" (622 mm) 81 deep without curb

58- 2510 7" (178 mm) 211/2" (546 mm) 194 standard81- 4200 7" (178 mm) 23" (584 mm) 81 standard194- 5300 7" (178 mm) 24" (610 mm) 194 deep81-3498 7" (178 mm) 2411/16" (627 mm) 81 deep81-3479 7" (178 mm) 27" (686 mm) 503/81 deep115-549 7" (178 mm) 283/4 (730 mm) 11563-729 7" (178 mm) 30" (762 mm) 113

144-15080 73⁄4 (197 mm) 191/4 " (489 mm) 144 standard TG

81-6221 8" (203 mm) 23" (584 mm) 81 standard115-2028 8" (203 mm) 261/8 (664 mm) 115/81 deep503- 5903 8" (203 mm) 283/4 (730 mm) 503194-5643 8" (203 mm) 24" ( 610 mm) 101/2" flange dia for 194 feeder503- 6115 8" (203 mm) 27" (686 mm) 101/2" flange dia for 194 feeder

E- 0210 9" (229 mm) length as required PSR special tubeE-0208 91/4" (235 mm) length as required PSR special tube113- 548 91/2" (241 mm) 263/8" (670 mm) 113

81- 6223 10" (254 mm) 23" (584 mm) 81 standard503 - 5370 10" (254 mm) 261/8" (664 mm) 81/115/503 deep503-6261 10" (254 mm) 27" (686 mm) 503503- 6427 10" (254 mm) 281/8"(714 mm) 503503-6566 10" (254 mm) 303/4" (781 mm) 503503-5950 10" (254 mm) 29" (737 mm) 503

515-5006 11" (279 mm) 28" (711 mm) 503/515

Part No. Inside diameter Length Remark No. Hole Diameter dimension xOf holes

φ

L

34


555-2066 5" (127 mm) 22" (559 mm) 11" flange diameter555-2087 5" (127 mm) 24" (610 mm) 11" flange diameter

555-2067 6" (152 mm) 22" (559 mm) 11" flange diameter555-2088 6" (152 mm) 24" (610 mm) 11" flange diameter

555-2068 7" (178 mm) 22" (559 mm) 11" flange diameter555-2089 7" (178 mm) 24" (610 mm) 11" flange diameter555-1520 7" (178 mm) 233/8" (594 mm) 139/16" flange diameter555-1057 7" (178 mm) 263/8" (670 mm) 139/16" flange diameter

194-5770 8" (203 mm) 191⁄2" (495 mm) 105/8" flange diameter555-2069 8" (203 mm) 22" (559 mm) 11" flange diameter555-2090 8" (203 mm) 24" (610 mm) 11" flange diameter555-1521 8" (203 mm) 233/8" (594 mm) 139/16" flange diameter555-1058 8" (203 mm) 263/8" (670 mm) 139/16" flange diameter

555-1001 10" (254 mm) 263/8" (670 mm) 139/16" flange diameter555-1602 10" (254 mm) 283/8" (721 mm) 139/16" flange diameter

555-2124 12" (305 mm) 263/8" (670 mm) 151⁄2 " flange diameter

SELF CENTERING TUBESPlain

▼

▼

▼

▼

L

φ

35

STANDARD TUBESVented


144-14379 5" (127 mm) 17" (432 mm) 144 standard 4 7/8" (22 mm) 71/4" (184 mm)144-14380 5" (127 mm) 211/2" (546 mm) 144 deep 4 7/8" (22 mm) 11" (279 mm)

144-14376 6" (152 mm) 18" (457 mm) 144 standard 4 7/8" (22 mm) 71/4" (184 mm)144-14220 6" (152 mm) 211/2" (546 mm) 144 deep 4 7/8" (22 mm) 11" (279 mm)81-4199 6" (152 mm) 23" (584 mm) 81 Standard 4 7/8" (22 mm) 93/4" (248 mm)81-3952 6" (152 mm) 24" (610 mm) 81 deep with curb 4 7/8" (22 mm) 111/2" (292 mm)81-3903 6" (152 mm) 241/2" (622 mm) 81 deep without curb 4 7/8" (22 mm) 11" (279 mm)

81-4202 7" (178 mm) 211/2" (546 mm) 194 standard 4 7/8" (22 mm) 93/4" (248 mm)194-5162 7" (178 mm) 211/2" (546 mm) 194 standard 4 7/8" (22 mm) 111/2" (292 mm)58-3190 7" (178 mm) 211/2" (546 mm) 3 7/8" (22 mm) 13 1/2" (343 mm)144-15175 7" (178 mm) 23" (584 mm) 144 deep 4 7/8" (22 mm) 111/2" (292 mm)81- 4201 7" (178 mm) 23" (584 mm) 81 standard 4 7/8" (22 mm) 11" (279 mm)194-5301 7" (178 mm) 24" (610 mm) 194 deep 4 7/8" (22 mm) 111/2" (292 mm)81- 4295 7" (178 mm) 2411/16" (627 mm) 4 7/8" (22 mm) 111/2" (292 mm)81-3904 7" (178 mm) 27" (686 mm) 81 deep 4 7/8" (22 mm) 12" (305 mm)503-5845 7" (178 mm) 27" (686 mm) 503 4 7/8" (22 mm) 121/2" (318 mm)115- 903 7" (178 mm) 283/4" (730 mm) 115 4 7/8" (22 mm) 123/16" (309 mm)

81-6222 8" (203 mm) 23" (584 mm) 81 standard 4 7/8" (22 mm) 101/2" (266 mm)115- 2029 8" (203 mm) 261/8" (664 mm) 115/81 deep 4 7/8" (22 mm) 121/2" (318 mm)194- 5637 8" (203 mm) 24" (610 mm) 10.1/2" flange dia for 194 feeder 4 7/8" (22 mm) 13" (330 mm)

E - 0210 9" (229 mm) length as required PSR special tube venting details as required E - 0208 91/4" (235 mm) length as required PSR special tube venting details as required113- 716 91/2" (241 mm) 263/8" (670 mm) 4 7/8" (22 mm) 141/2"(368mm)

81-6224 10" (254 mm) 23" (584 mm) 81 standard 4 7/8" (22 mm) 101/2" (267 mm)503-6237 10" (254 mm) 261/8" (664 mm) 4 7/8" (22 mm) 83/4" (222 mm)503-5369 10" (254 mm) 261/8" (664 mm) 503 4 7/8" (22 mm) 121/2" (318 mm)503-5741 10" (254 mm) 261/8" (664 mm) 503 4 13/4"(44 mm) 13" (330 mm)503-6547 10" (254 mm) 261/8" (664 mm) 503 4 11/4"(32 mm) 13" (330 mm)503-6267 10" (254 mm) 27" (686 mm) 4 7/8" (22 mm) 121/2" (318 mm)503-5936 10" (254 mm) 281/8" (714 mm) 503 3 2" (51 mm) 1x15" (381 mm)

1x151/4"(387 mm)1x151/2" (394 mm)

515-6151 10" (254 mm) 281/8" (714 mm) 515 4 7/8" (22 mm) 151/2"(394 mm)503-6362 10" (254 mm) 281/8 " (714 mm) 4 7/8" (22 mm) 151/4"(387 mm)503-5949 10" (254 mm) 29" (737 mm) 515 4 7/8" (22 mm) 121/2"(318 mm)503-6543 10" (254 mm) 3011/16" (779 mm) 3 2" (51 mm) 16"(406 mm)503-6567 10" (254 mm) 303/4" (781 mm) 515 4 7/8" (22 mm) 141/4" (362 mm)503-6526 10" (254 mm) 317/8" (810 mm) 515 3 2" (51 mm) 16" (406 mm)

515-5007 11" (279 mm) 28" (711 mm) 515 4 7/8" (22 mm) 141/2" (368 mm)515-5132 11" (279 mm) 28" (711 mm) 515 3 2" (51 mm) 141/2" (368 mm)

515- 6018 12" (305 mm) 281/2" (724 mm) 515 4 7/8" (22 mm) 141/2" (368 mm)

▼

▼

▼

▼

▼

▼

L

φ

X

36

SELF CENTERING TUBESVented

Part No. Inside diameter Length Remark No. Hole Diameter Dimension XOf holes

555-2071 5" (127 mm) 22" (559 mm) 11" (279 mm) flange diameter 4 7/8" (22 mm) 9" (229 mm)555-2092 5" (127 mm) 24" (610 mm) 11" (279 mm) flange diameter 4 7/8" (22 mm) 11" (279 mm)

555-2072 6" (152 mm) 22" (559 mm) 11" (279 mm) flange diameter 4 7/8" (22 mm) 9" (229 mm)555-2093 6" (152 mm) 24" (610 mm) 11" (279 mm) flange diameter 4 7/8" (22 mm) 11" (279 mm)

555-2073 7" (178 mm) 22" (559 mm) 11" (279 mm) flange diameter 4 7/8" (22 mm) 9" (229 mm)555-2094 7" (178 mm) 24" (610 mm) 11" (279 mm) flange diameter 4 7/8" (22 mm) 11" (279 mm)555-1518 7" (178 mm) 233/8" (594 mm) 139/16" (344 mm) flange diameter 3 7/8" (22 mm) 91/2" (241 mm)555-1056 7" ( 178 mm) 263/8" (670 mm) 139/16" (344 mm) flange diameter 3 7/8" (22 mm) 121/2" (318 mm)

194-5769 8" (203 mm) 191/2 "(495 mm) 105/8" (270 mm) flange diameter 4 7/8" (22 mm) 111/2" (292 mm)555-2074 8" (203 mm) 22" (559 mm) 11" (279 mm) flange diameter 4 7/8" (22 mm) 9" (229 mm)555-2095 8" (203 mm) 24" (610 mm) 11" (279 mm) flange diameter 4 7/8" (22 mm) 11" (279 mm)555-1519 8" (203 mm) 233/8" (594 mm) 139/16" (344 mm) flange diameter 3 7/8" (22 mm) 91/2" (241 mm)555-2543 8" (203 mm) 24" (610 mm) 139/16" (344 mm) flange diameter 3 11/2" (38 mm) 12” (305 mm)555-1793 8" (203 mm) 24" (610 mm) 139/16" (344 mm) flange diameter 4 11/2" (38 mm) 12” (305 mm)555-1340 8" (203 mm) 263/8" (670 mm) 139/16" (344 mm) flange diameter 3 7/8" (22 mm) 121/2" (318 mm)555-1837 8" (203 mm) 263/8" (670 mm) 139/16" (344 mm) flange diameter 3 11/2" (38 mm) 121/2" (318 mm)555-1832 8" (203 mm) 27" (686 mm) 139/16" (344 mm) flange diameter 3 7/8" (22 mm) 13" (330 mm)

555-1415 10" (254 mm) 233/8" (594 mm) 139/16" (344 mm) flange diameter 3 7/8" (22 mm) 10" (254 mm)555-1052 10" (254 mm) 263/8" (670 mm) 139/16" (344 mm) flange diameter 3 7/8" (22 mm) 121/2" (318 mm)555-1765 10" (254 mm) 263/8" (670 mm) 139/16" (344 mm) flange diameter 4 7/8" (22 mm) 121/2" (318 mm)555-1795 10" (254 mm) 263/8" (670 mm) 139/16" (344 mm) flange diameter 3 2" (51 mm) 121/2" (318 mm)555-1826 10" (254 mm) 263/8" (670 mm) 139/16" (344 mm) flange diameter 4 2" (51 mm) 121/2" (318 mm)555-1779 10" (254 mm) 263/8" (670 mm) 139/16" (344 mm) flange diameter 3 2" (51 mm) 13" (330 mm)555-1794 10" (254 mm) 263/8" (670 mm) 139/16" (344 mm) flange diameter 4 11/2" (38 mm) 13" (330 mm)555-1329 10" (254 mm) 263/8" (670 mm) 139/16" (344 mm) flange diameter 3 7/8" (22 mm) 151⁄4" (387 mm)555-1881 10" (254 mm) 263/8" (670 mm) 139/16" (344 mm) flange diameter 3 11/2" (38 mm) 121⁄2" (318 mm)555-1653 10" (254 mm) 283/8" (721 mm) 139/16" (344 mm) flange diameter 3 2" (51 mm) 151⁄4" (387 mm)555-1822 10" (254 mm) 283/8" (721 mm) 139/16" (344 mm) flange diameter 3 11/2" (38 mm) 151⁄4" (387 mm)555-1181 10" (254 mm) 283/8" (721 mm) 139/16" (344 mm) flange diameter 3 7/8" (22 mm) 151⁄4" (387 mm)

555-1808 11" (279 mm) 283/8" (721 mm) 151/2" (394 mm) flange diameter 3 7/8" (22 mm) 151⁄4" (387 mm)555-2663 11" (279 mm) 283/8" (721 mm) 151/2" (394 mm) flange diameter 3 2" (51 mm) 151⁄4" (387 mm)555-1833 11" (279 mm) 263⁄8" (670 mm) 151/2" (394 mm) flange diameter 3 7/8" (22 mm) 131⁄4" (337 mm)

555-1807 12" (305 mm) 283/8" (721 mm) 151/2" (394 mm) flange diameter 3 7/8" (22 mm) 151⁄4" (387 mm)

X

▼

▼

▼

▼

▼

▼

L

φ

37

Part No. Dimension X Dimension Y Dimension Z

PLUNGERS

144-11793 23/4" (70 mm) 251/2" (648 mm) 23/8" (60 mm)144-389 21/2" (63 mm) 27" (686 mm) 23/8" (60 mm)144-388 23/4" (70 mm) 27" (686 mm) 23/8" (60 mm)81-4568 23/4" (70 mm) 27" (686 mm) 23/4" (70 mm)144-490 3" (76 mm) 27" (686 mm) 23/4" (70 mm)144-3168 31/4" (83 mm) 27" (686 mm) 23/4" (70 mm)144-3169 31/2" (89 mm) 27" (686 mm) 23/4" (70 mm)81-4633 23/4" (70 mm) 28" (711 mm) 23/4" (70 mm)81-4637 3" (76 mm) 28" (711 mm) 23/4" (70 mm)81-4634 31/4" (83 mm) 28" (711 mm) 23/4" (70 mm)81-4636 31/2" (89 mm) 28" (711 mm) 23/4" (70 mm)58-2582 31/4" (83 mm) 321/8" (816 mm) 31/8" (79 mm)58-2583 31/2" (89 mm) 321/8" (816 mm) 31/8" (79 mm)58-2584 33/4" (95 mm) 321/8" (816 mm) 31/8" (79 mm)58-2585 4" (102 mm) 321/8" (816 mm) 31/8" (79 mm)58-2586 41/4" (108 mm) 321/8" (816 mm) 31/8" (79 mm)58-2587 41/2" (114 mm) 321/8" (816 mm) 31/8" (79 mm)58-2588 43/4" (121 mm) 321/8" (816 mm) 31/8" (79 mm)58-2589 5" (127 mm) 321/8" (816 mm) 31/8" (79 mm)

144-2778 21/2" (63 mm) 27" (686 mm) 23/8" (60 mm)144-11395 23/4" (70 mm) 321/8" (816 mm) 31/8" (79 mm)


Shape No 1 - Standard Point

Shape No 5 - Standard Point - Tapered

Shape No 3 - Taper Point

X

X

Z

Z

Y

Y


144-735 23/4" (70 mm) 27" (686 mm) 23/8" (60 mm)29-611 21/2" (63 mm) 321/8" (816 mm) 31/8" (79 mm)29-612 23/4" (70 mm) 321/8" (816 mm) 31/8" (79 mm)29-610 3" (76 mm) 321/8"(816 mm) 31/8" (79 mm)144-11792 23/4" (70 mm) 301/2" (775 mm) 31/8" (79 mm)144-13853 3" (76 mm) 301/2"(775 mm) 31/8" (79 mm)503-5129 13/4" (45 mm) 30" (762 mm) 2" (51 mm)503-5128 17/8" (48 mm) 30" (762 mm) 2" (51 mm)503-5094 2" (51 mm) 30" (762 mm) 2" (51 mm)503-5360 21/8" (54 mm) 30" (762 mm) 2" (51 mm)503-5398 21/4" (57 mm) 30" (762 mm) 2" (51 mm)503-5361 23/8" (60 mm) 30" (762 mm) 2" (51 mm)503-6000 23/8" (60 mm) 30" (762 mm) 23/4" (70 mm)503-5598 21/2" (63 mm) 30" (762 mm) 23/4" (70 mm)503-5599 23/4" (70 mm) 30" (762 mm) 23/4" (70 mm)503-5600 3" (76 mm) 30" (762 mm) 23/4" (70 mm)503-5601 31/4" (83 mm) 30" (762 mm) 23/4" (70 mm)515-5166 13/4" (45 mm) 313/4" (803 mm) 2" (51 mm)515-5167 17/8" (48 mm) 313/4" (803 mm) 2" (51 mm)515-5168 2" (51 mm) 313/4" (803 mm) 2" (51 mm)515-5169 21/8" (54 mm) 313/4" (803 mm) 2" (51 mm)515-5170 21/4" (57 mm) 313/4" (803 mm) 2" (51 mm)515-5171 23/8" (60 mm) 313/4" (803 mm) 2" (51 mm)503-6552 13/4" (45 mm) 32" (813 mm) 2" (51 mm)503-6553 17/8" (48 mm) 32" (813 mm) 2" (51 mm)503-6551 2" (51 mm) 32" (813 mm) 2" (51 mm)503-6555 21/8" (54 mm) 32" (813 mm) 2" (51 mm)503-6556 21/4" (57 mm) 32" (813 mm) 2" (51 mm)503-6557 23/8" (60 mm) 32" (813 mm) 2" (51 mm)501-6358 13/4" (45 mm) 32" (813 mm) 2" (51 mm)501-6357 17/8" (48 mm) 32" (813 mm) 2" (51 mm)501-6355 2" (51 mm) 32" (813 mm) 2" (51 mm)501-6280 21/8" (54 mm) 32" (813 mm) 2" (51 mm)501-6359 21/4" (57 mm) 32" (813 mm) 2" (51 mm)501-6353 23/8" (60 mm) 32" (813 mm) 2" (51 mm)503-6571 21/2" (63 mm) 30" (762 mm) 2" (51 mm)503-6554 23/8" (60 mm) 32" (813 mm) 23/4" (70 mm)503-6558 21/2" (63 mm) 32" (813 mm) 23/4" (70 mm)503-6559 23/4" (70 mm) 32" (813 mm) 23/4" (70 mm)503-6560 3" (76 mm) 32" (813 mm) 23/4" (70 mm)503-6561 31/4" (83 mm) 32" (813 mm) 23/4" (70 mm)

X

Y

Z

38

PLUNGERS

501-5089 21/2" (63 mm) 321/8" (816 mm) 31/8" (79 mm)144-14156 23/4" (70 mm) 321/8" (816 mm) 31/8" (79 mm)29-609 3" (76 mm) 321/8"(816 mm) 31/8" (79 mm)501-5681 13/4" (45 mm) 30" (762 mm) 2" (51 mm)501-5680 2" (51 mm) 30" (762 mm) 2" (51 mm)501-5679 21/4" (57 mm) 30" (762 mm) 2" (51 mm)501-5678 23/8" (60 mm) 30" (762 mm) 2" (51 mm)501-5582 21/2" (63 mm) 30" (762 mm) 2" (51 mm)144-12237 3" (76 mm) 301/2" (775 mm) 31/8" (79 mm)

81-3929 11/4" (32 mm) 27" (686 mm) 21/4" (57 mm)DG - 3" CD

81-3928 11/2" (38 mm) 27" (686 mm) 21/4" (57 mm)DG - 3" CD

81-3920 13/4 " (45 mm) 27" (686 mm) 21/4" (57 mm)DG - 3" CD

81-3921 17/8" (48 mm) 27" (686 mm) 21/4" (57 mm)DG - 3" CD

81-3683 2" (51 mm) 27" (686 mm) 21/4" (57 mm)DG - 3" CD

81-3749 23/8" (60 mm) 27" (686 mm) 21/4" (57 mm)DG - 3" CD

81-3750 21/2" (63 mm) 27" (686 mm) 21/4" (57 mm)DG - 3" CD



Shape No 6 - Ball Point Tapered

Twin Plungers - Standard Point

144-7755 3" (76 mm) 251/2"(648 mm) 23/4" (70 mm)144-7652 31/2" (89 mm) 251/2"(648 mm) 31/8" (79 mm)144-7653 41/8" (105 mm) 251/2"(648 mm) 31/8" (79 mm)


Shape No 4 - Square Point

X

XY

Y

Y

Z

Z

Z

X

39

Part No. Dimension X Dimension Y Dimension Z Part No. Dimension X Dimension Y Dimension Z

PLUNGERSShape No 2Ball Point

144-11794 3" (76 mm) 251/2" (648 mm) 23/4" (70 mm)144-11795 31/4" (83 mm) 251/2" (648 mm) 31/8" (79 mm)144-11796 31/2" (89 mm) 251/2" (648 mm) 31/8" (79 mm)144-11797 33/4" (95 mm) 251/2" (648 mm) 31/8" (79 mm) 144-780 31/4" (83 mm) 26" (660 mm) 31/8" (79 mm)144-781 31/2" (89 mm) 26" (660 mm) 31/8" (79 mm)144-3985 33/4" (95 mm) 26" (660 mm) 31/8" (79 mm)81-4566 31/4" (83 mm) 27" (686 mm) 23/4" (70 mm)81-4589 31/4" (83 mm) 27" (686 mm) 31/8" (79 mm)81-4590 31/2" (89 mm) 27" (686 mm) 31/8" (79 mm)81-4591 33/4" (95 mm) 27" (686 mm) 31/8" (79 mm)81-4592 4" (102 mm) 27" (686 mm) 31/8" (79 mm)81-4593 41/4" (108 mm) 27" (686 mm) 31/8" (79 mm)81-4594 41/2" (114 mm) 27" (686 mm) 31/8" (79 mm)81-4595 43/4" (121 mm) 27" (686 mm) 31/8" (79 mm)81-4596 5" (127 mm) 27" (686 mm) 31/8" (79 mm)144-1246 21/2" (63 mm) 27" (686 mm) 23/8" (60 mm)144-1217 23/4" (70 mm) 27" (686 mm) 23/8" (60 mm)144-1218 3" (76 mm) 27" (686 mm) 23/4" (70 mm)501-5681 13/4" (45 mm) 30" (762 mm) 2" (51 mm)501-5680 2" (51 mm) 30" (762 mm) 2" (51 mm)501-6159 21/8" (54 mm) 30" (762 mm) 2" (51 mm)501-5679 21/4" (57 mm) 30" (762 mm) 2" (51 mm)501-5678 23/8" (60 mm) 30" (762 mm) 2" (51 mm)501-5582 21/2" (63 mm) 30" (762 mm) 2" (51 mm)503-5652 3" (76 mm) 30" (762 mm) 23/4" (70 mm)503-5653 31/4" (83 mm) 30" (762 mm) 23/4" (70 mm)503-5654 31/2" (89 mm) 30" (762 mm) 23/4" (70 mm)503-5697 4" (102 mm) 30" (762 mm) 23/4" (70 mm)503-6707 31/4" (83 mm) 30" (762 mm) 31/8" (79 mm)503-6708 31/2" (89 mm) 30" (762 mm) 31/8" (79 mm)503-6709 33/4" (95 mm) 30" (762 mm) 31/8" (79 mm)503-6800 4" (102 mm) 30" (762 mm) 31/8" (79 mm)503-6801 41/4" (108 mm) 30" (762 mm) 31/8" (79 mm)503-6802 41/2" (114 mm) 30" (762 mm) 31/8" (79 mm)503-6803 43/4" (121 mm) 30" (762 mm) 31/8" (79 mm)503-6804 5" (127 mm) 30" (762 mm) 31/8" (79 mm)144-13842 3" (76 mm) 301/2" (775 mm) 23/4" (70 mm)144-12238 31/4" (83 mm) 301/2" (775 mm) 31/8" (79 mm)144-12239 31/2" (89 mm) 301/2" (775 mm) 31/8" (79 mm)144-13116 33/4" (95 mm) 301/2" (775 mm) 31/8" (79 mm)

144-13117 4" (102 mm) 301/2" (775 mm) 31/8" (79 mm)144-13118 41/4" (108 mm) 301/2" (775 mm) 31/8" (79 mm)144-13119 41/2" (114 mm) 301/2" (775 mm) 31/8" (79 mm)144-13120 43/4" (121 mm) 301/2" (775 mm) 31/8" (79 mm) 144-5483 31/4" (83 mm) 311/8" (791 mm) 31/8" (79 mm)29-607 31/2" (89 mm) 311/8" (791 mm) 31/8" (79 mm)144-5470 33/4" (95 mm) 311/8" (791 mm) 31/8" (79 mm)144-5471 4" (102 mm) 311/8" (791 mm) 31/8" (79 mm)144-5472 41/4" (108 mm) 311/8" (791 mm) 31/8" (79 mm)515-5172 13/4" (45 mm) 313/4" (806 mm) 2" (51 mm)515-5173 2" (51 mm) 313/4" (806 mm) 2" (51 mm)515-5174 21/4" (57 mm) 313/4" (806 mm) 2" (51 mm)515-5175 23/8" (60 mm) 313/4" (806 mm) 2" (51 mm)515-5176 21/2" (63 mm) 313/4" (806 mm) 2" (51 mm)501-6318 2" (51 mm) 32" (813 mm) 2" (51 mm)501-6292 21/8" (54 mm) 32" (813 mm) 2" (51 mm)501-6313 21/4" (57 mm) 32" (813 mm) 2" (51 mm)501-6304 23/8" (60 mm) 32" (813 mm) 2" (51 mm)501-6314 21/2" (63 mm) 32" (813 mm) 2" (51 mm)503-6562 3" (76 mm) 32" (813 mm) 23/4" (70 mm)503-6563 31/4" (83 mm) 32" (813 mm) 23/4" (70 mm)503-6564 31/2" (89 mm) 32" (813 mm) 23/4" (70 mm)503-6565 4" (102 mm) 32" (813 mm) 23/4" (70 mm)144-5177 3" (76 mm) 321/8" (816 mm) 31/8" (79 mm)58-2573 31/4" (83 mm) 321/8" (816 mm) 31/8" (79 mm)58-2574 31/2" (89 mm) 321/8" (816 mm) 31/8" (79 mm)58-2575 33/4" (95 mm) 321/8" (816 mm) 31/8" (79 mm)58-2576 4" (102 mm) 321/8" (816 mm) 31/8" (79 mm)58-2577 41/4" (108 mm) 321/8" (816 mm) 31/8" (79 mm)58-2578 41/2" (114 mm) 321/8" (816 mm) 31/8" (79 mm)58-2579 43/4" (121 mm) 321/8" (816 mm) 31/8" (79 mm)58-2580 5" (127 mm) 321/8" (816 mm) 31/8" (79 mm)113-584 51/2" (140 mm) 321/8" (816 mm) 51/8" (130 mm)113-585 6" (152 mm) 321/8" (816 mm) 51/8" (130 mm)113-586 61/2" (165 mm) 321/8" (816 mm) 51/8" (130 mm)113-587 7" (178 mm) 321/8" (816 mm) 51/8" (130 mm)

X

Y

Z

40

PLUNGERS

81-3894 13/4" (45 mm) 28" (711 mm) 21/4" (57 mm)DG - 43/8" CD

81-3895 17/8" (48 mm) 28" (711 mm) 21/4" (57 mm)DG - 43/8" CD

81-3896 2" (51 mm) 28" (711 mm) 21/4" (57 mm)DG - 43/8" CD

81-3742 21/8" (54 mm) 28" (711 mm) 21/4" (57 mm)DG - 43/8" CD

81-3743 23/8" (60 mm) 28" (711 mm) 21/4" (57 mm)DG - 43/8" CD

81-3744 21/2" (63 mm) 28" (711 mm) 21/4" (57 mm)DG - 43/8" CD

81-4066 13/4" (45 mm) 28" (711 mm) 2" (51 mm)DG - 43/8" CD

81-4067 17/8" (48 mm) 28" (711 mm) 2" (51 mm)DG - 43/8" CD

81-4068 2" (51 mm) 28" (711 mm) 2" (51 mm)DG - 43/8" CD

81-4069 21/8" (54 mm) 28" (711 mm) 2" (51 mm)DG - 43/8" CD

81-4070 23/8" (60 mm) 28" (711 mm) 2" (51 mm)DG - 43/8" CD

81-4071 21/2" (63 mm) 28" (711 mm) 2" (51 mm)DG - 43/8" CD

81-4131 13/4" (45 mm) 30" (762 mm) 2" (51 mm)DG - 43/8" CD

81-4132 17/8" (48 mm) 30" (762 mm) 2" (51 mm)DG - 43/8" CD

81-4133 2" (51 mm) 30" (762 mm) 2" (51 mm)DG - 43/8" CD

503-5450 21/8" (54 mm) 30" (762 mm) 2" (51 mm)DG - 43/8" CD

503-5449 23/8" (60 mm) 30" (762 mm) 2" (51 mm)DG - 43/8" CD

81-4134 21/2" (63 mm) 30" (762 mm) 2" (51 mm)DG - 43/8" CD

144-15106 (centre) 13/4" (45 mm) 231/4" (590 mm) 11/2" (38 mm)TG - 3" CD

144-15107 (outside) 13/4" (45 mm) 231/4" (590 mm) 11/2" (38 mm)TG - 3" CD

515-6096 (outside) 23/8" (60 mm) 30" (762 mm) 23/4" (70 mm)TG - 43/8" CD

503-6000 (centre) 23/8" (60 mm) 30" (762 mm) 23/4" (70 mm)TG - 43/8" CD

515-6017 (outside) 21/2" (63 mm) 30" (762 mm) 23/4" (70 mm)TG - 43/8" CD

503-5598 (centre) 21/2" (63 mm) 30" (762 mm) 23/4" (70 mm)TG - 43/8" CD

555-2140 (centre) 13/4" (45 mm) 28" (711 mm) 2" (51 mm)TG - 43/8" CD

555-2141 (outside) 13/4" (45 mm) 28" (711 mm) 2" (51 mm)TG - 43/8" CD



Twin Plungers - Offset Point

Triple Plungers - Standard Point (centre) Offset Point (outside)

X

X

Y

Y

Z

Z

41

MICROTHERM FEEDER BOWLINSULATION KITSfor Emhart Spout Bowls

Micropore Part No. Spout type Spout depth Single/double layer Thickness

FBK-01 81-18" wide standard single 13mmFBK-02 81-18" wide standard double 26mmFBK-03 81-18" wide deep single 13mmFBK-04 81-18" wide deep double 26mmFBK-05 81-16" offset deep double 26mmFBK-10 115 deep only single 13mmFBK-11 115 deep only double 26mmFBK-20 144-centreline deep double 26mmFBK-21 144-centreline standard double 26mmFBK-22 144-angular shearing standard double 26mmFBK-23 144-angular shearing deep double 26mmFBK-40 194 deep single 13mmFBK-41 194 deep double 26mmFBK-42 194 standard single 13mmFBK-43 194 standard double 26mmFBK-50 503 deep only single 13mmFBK-51 503 deep only single 26mm walls - 13 mm baseFBK-52 503 deep only single 13mmFBK-60 515 deep only single 13mmFBK-61 515 deep only double 26mm walls - 13mm baseFBK-80 555 deep only double 26mmFBK-81 555 deep only single 13mm

Microtherm is a Trade Mark of Microtherm (GB) Ltd.

The Microtherm part numbers are reproduced by permission of

Microtherm (GB) Ltd.

42

SKIMMER, MANTLE andBACK BLOCKS

Part No. Type channel widths Dimension L Dimension H Dimension W Dimension TInches mm Inches mm Inches mm inches mm Inches mm

144-10910 plain 16 406 24 610 12 305 4 102 151/2 394144-11482 plain 26 660 301/2 775 12 305 4 102 251/2 648144-11578 panelled 26 660 301/2 775 12 305 4 102 251/2 648144-14329 plain 30 762 341/2 876 12 305 4 102 291/2 74963-702 panelled 36 914 46 1168 18 457 6 152 351/2 902119-937 panelled 36 914 44 1118 151/2 394 4 102 351/2 902119-976 panelled 36/26 914/660 361/2 927 151/2 394 4 102 28 711520-1035 panelled 48 1219 60 1524 18 457 6 152 47 1194520-1129 panelled 48/36 1219/914 60 1524 18 457 6 152 39 991F-637 plain 43 1092 523/4 1340 18 457 6 152 421/2 1080

Skimmer Blocks

Part No. Type channel widths Dimension L Dimension H Dimension WInches mm Inches mm Inches mm inches mm

144-3521 solid (type Z) 16 406 30 762 18 457 51/2 140144-6263 solid (type Z) 16 406 30 762 12 305 6 152144-7873 solid 16 406 26 660 14 356 6 152144-7876 solid 26 660 36 914 14 356 6 152119-578 hollow 26 660 36 914 14 356 6 152144-14330 solid 30 762 42 1067 18 457 6 152119-938 hollow 36 914 44 1118 141/2 368 6 152520-1212 hollow 48 1219 60 1524 18 457 7 178

Mantle Blocks

L

T

W

H

W

H L

43

Part No. Type channel widths Dimension L Dimension H Dimension W Dimension TInches mm Inches mm Inches mm inches mm inches mm

2460-1390 16 406 24 610 9 229 31/2 89 N/A N/A2460-1851 22 559 30 762 9 229 31/2 89 N/A N/A81-3508 22 559 30 762 91/4 235 41/2 114 211/2 546115-608 26 660 34 864 12 305 4 102 251/2 648503-5145 36 914 44 1118 12 305 4 102 343/4 883520-1037 48 1219 54 1372 17 432 51/2 140 47 1194

Back Blocks

Part No. Type channel widths Dimension L Dimension H Dimension WInches mm Inches mm Inches mm inches mm

R-500-11509 26 660 36 915 153/8 390 6 152R-500-21509 36 914 471/4 1200 153/8 390 6 152R-500-31509 43 1092 523/4 1340 171/8 435 7 178R-500-41509 48 1219 57 7/8 1470 171/8 435 7 178

System 500 Mantle Blocks

W

H

T

L

L

W

H

BLOCKS Continued

44

STIRRERS

Screw Type Stirrers

Paddle Type Stirrers

Part No. Channel Depth Dimension X Dimension Y Dimension ZInches mm Inches mm Inches mm Inches mm

98-516 10 254 30 762 61/2 165 71/2 19098-693 7 178 30 762 61/2 165 41/2 11598-795 10 254 33 838 61/2 165 71/2 190119-863 7 178 27 686 61/2 165 41/2 115144-10615 10 254 27 686 6 152 71/2 190119-1038 11 279 337/8 860 61/2 165 71/2 190520-1101 7 178 36 914 53/4 146 41/2 115520-1120 10 254 36 914 53/4 146 71/2 190

98-796 10 254 33 838 61/2 165 71/2 190119-902 7 178 27 686 61/2 165 41/2 115119-906 10 254 30 762 61/2 165 71/2 190119-1022 10 254 33 838 61/2 165 71/2 190501-5128 7 178 30 762 61/2 165 41/2 115119-1037 11 279 337/8 860 61/2 165 71/2 190520-1102 7 178 36 914 53/4 146 41/2 115520-1121 10 254 36 914 53/4 146 71/2 190

With right hand Helix (as illustrated)

With left hand Helix

Y

Z

X

Y

X

Paddle type stirers are manufactured to customers’ individual require-ments up to the maximum dimensions indicated below.

Maximum Y dimension = 18” (457 mm)Maximum X dimension = 48” (1220 mm)

Please quote reference E-0640 (illustrated - right hand)and E-0641 (left hand)

45

ROTOR SEGMENTS

Part No. Quantity per set Length spout typeInches mm

81-3101 3 183/8 467 standard81-3419 3 205/8 524 deep81-4078 3 197/8 505 deep501-5125 3 195/8 498 deep

81-3487 3 205/8 524 deep81-3488 3 183/8 467 standard81-4079 3 197/8 505 deep501-5126 3 195/8 498 deep

115-563 3 229/16 573115-745 3 229/16 573115-918 3 2113/16 554

503-6550 3 225/8 575

503-5910 3 21 533503-6527 3 223/4 578

For type 81 feeder with 7" tube

For type 115 feeder


For type 503/515 feeder with 10" tube


46

144-3765 16" (406mm) 10” (254mm) 24" (610mm)530-1006 16" (406mm) 7” (178mm) 24" (610mm)119-840 26" (660mm) 7/10” (178/254mm) 24" (610mm)119-846 26" (660mm) 10” (254mm) 24" (610mm)144-11492 26" (660mm) 7” (178mm) 24" (610mm)119-950 36" (914mm) 7” (178mm) 24" (610mm)F-131 43” (1092mm) 7” (178mm) 24" (610mm)F-143 48" (1220mm) 7” (178mm) 18" (457mm) 520-1003 48" (1220mm) 7” (178mm) 24" (610mm)

Part Number Dimension W Dimension D Dimension L

Straight Channels - Classic

530-1008 16" (406mm) 7” (178mm) 24" (610mm)530-1010 26" (660mm) 7” (178mm) 24" (610mm)530-1012 36" (914mm) 7” (178mm) 24" (610mm)F-161 43” (1092mm) 7” (178mm) 24" (610mm)F-138 48” (1220mm) 7” (178mm) 24" (610mm)F-181 54” (1372mm) 7” (178mm) 24" (610mm)


Straight Channels - Profiled

CHANNEL BLOCKS

L

L

W

W

D

D

47

F-170 16" (406mm) 7” (178mm) 24" (610mm)530-1019 26" (660mm) 7” (178mm) 24" (610mm)530-1020 36" (914mm) 7” (178mm) 24" (610mm)F-164 43” (1092mm) 7” (178mm) 24" (610mm)


Straight Channels - Profile to Classic

144-11486 26/16” (660/406mm) 7” (178mm) 24” (610mm)81-3506 26/22” (660/559mm) 7” (178mm) 24” (610mm)63-899 36/26” (915/660mm) 7”/10” (178/254mm) 24” (610mm)119-955 36/26” (915/660mm) 7” (178mm) 24” (610mm)F-133 43/26” (1092/660mm) 7” (178mm) 24” (610mm)F-132 43/36” (1092/915mm) 7” (178mm) 24” (610mm)F-144 48/36” (1220/915mm) 7” (178mm) 24” (610mm)


Transition Channels - Classic

CHANNEL BLOCKS Continued

L

W

D

W

L

D

48


144-14805 26/14” (660/356mm) 7/10” (178/254mm) 24” (610mm)81-4083 26/18” (660/457mm) 7/10” (178/254mm) 24” (610mm)503-5498 26/22” (660/559mm) 7/115/16” (178/287mm) 24” (610mm)81-4076 36/18” (915/457mm) 7/10” (178/254mm) 24” (610mm)503-5455 36/22” (915/559mm) 7/115/16” (178/287mm) 24” (610mm)


Front Channels - Type 510

194-5120 26/18” (660/457mm) 7” (178mm) 24” (610mm)


Front Channels - Type 194

W

L

D

W

L

D

49


81-3533 A & B 22/16” (559/406mm) 7” (178mm) 24” + 24” (610mm + 610mm)81-3537 A & B 22/16” (559/406mm) 7” (178mm) 24” + 24” (610mm + 610mm)81-3535 A & B 22/16” (559/406mm) 7/91/2” (178/241mm) 24” + 24” (610mm + 610mm)81-3505 A & B 22/16” (559/406mm) 7/91/2” (178/241mm) 24” + 24” (610mm + 610mm)


Front Channels - Type 81 - 22” wide

144-13896 A & B 22/14” (559/365mm) 7/6” (178/152mm) 24” + 24” (610mm + 610mm)144-13897 A & B 22/14” (559/365mm) 7/6” (178/152mm) 24” + 24” (610mm + 610mm)144-13895 A & B 22/14” (559/365mm) 7/10” (178/254mm) 24” + 24” (610mm + 610mm)144-13898 A & B 22/14” (559/365mm) 7/10” (178/254mm) 24” + 24” (610mm + 610mm)



W

W

L L

L L

D

D

D

D

D

D

D

D

81-3533 A 81-3533 B

81-3537 A 81-3537 B

81-3535 A 81-3535 B

81-3505 A 81-3505 B

144-13896 A 144-13896 B

144-13897 A 144-13897 B

144-13895 A 144-13895 B

144-13898 A 144-13898 B

50


144-12939 A & B 16/14” (406/365mm) 7/6” (178/152mm) 24” + 24” (610mm + 610mm)144-13933 A & B 16/14” (406/365mm) 7/6” (178/152mm) 24” + 24” (610mm + 610mm)144-12987 A & B 16/14” (406/365mm) 7/10” (178/254mm) 24” + 24” (610mm + 610mm)144-13827 A & B 16/14” (406/365mm) 7/10” (178/254mm) 24” + 24” (610mm + 610mm)



W

L L

D

D

D

D

144-12939 A 144-12939 B

144-13933 A 144-13933 B

144-12987 A 144-12987 B

144-13827 A 144-13827 B

51

A fireclay based paste for filling the joint between the spout and the front channel. Supplied pre-mixed ready for use.

SiO2 A12O3 Fe2O3 TiO2 CaO MgO K2O & Na2O loss on heating% 53.69 16.36 1.72 0.73 0.02 0.44 0.64 26.5

A fireclay based paste for sealing the gap between the spout and the orifice ring. Supplied dry. Mix with water to required consistency.

SiO2 A12O3 Fe2O3 TiO2 CaO MgO K2O & Na2O loss on heating% 67.54 20.23 1.85 1.0 0.20 0.40 0.37 8.31

A general purpose mortar for jointing all forehearth brickwork. Supplied pre-mixed ready for use.

SiO2 A12O3 Fe2O3 TiO2 CaO MgO K2O Na2O loss on heating% 77.8 14.3 0.41 0.42 0.04 0.10 0.71 2.73 3.42

A lightweight castable insulation for the insulation of forehearth substructure. Supplied dry to be mixed with water.

SiO2 A12O3 Fe2O3 TiO2 CaO MgO K2O max. Service Typical Thermal& Na2O Temp. Conductivity

% 44.6 35.3 6.7 1.3 9.5 0.8 1.8 1300˚C 0.48 W/M˚K @ 600˚

1260˚C grade bulk chopped ceramic fibre for forehearth & spout insulation.

A fine aluminous powder sprinkled on the orifice luting cement to prevent sticking and ease removal of the orifice ring after use.

SiO2 A12O3 Fe2O3 TiO2 CaO & MgO K2O & Na2O loss on heating% 2.8 96.0 0.1 0.1 0.2 0.2 0.5

Orifice Luting Cement. Part No. 1320-455

Air set Cement. Part No. 1320-40

Castable Insulation. Part No. 1320-225

Ceramic fibre Insulation. Part No. 1380-86

Anti - Adhesive cement. Part No. 1320-460

Spout Luting cement. Part No. 1320-30

CEMENTS and POWDERS

All values are average and subject to change without notice

52

A course glass resistant grog intended to be used as a barrier beneath forehearth channels to prevent further glass penetration in the event ofleakage at the joints. Also used as a barrier infill material in the spout casing between the microtherm insulation panel and the spout.Supplied and installed dry.

SiO2 A12O3 Fe2O3 TiO2 ZrO2 Balance Typical thermalConductivity

% 15.0 73.0 0.1 0.15 11.0 0.75 1.2 W/M˚K @ 557˚C

An ultra- fine siliceous powder used for insulating between the orifice ring and the holder. Supplied and installed dry. Not to be mixed with water.

SiO2 A12O3 Fe2O3 CaO MgO K2O Na2O PH Bulk density% 91.1 4.0 1.3 0.5 0.6 0.7 0.6 7.0 .25 grm/cm3

Health and safety note: Apply and install with care, refer to instructions for use.

A lightweight expanded fireclay grog used as an insulation fill between the spout and the spout casing. Supplied and installed dry.

SiO2 A12O3 Fe2O3 TiO2 CaO MgO K2O Na2O Typical Thermal Conductivity

% 57.1 33.52 3.66 1.36 0.62 1.2 1.98 0.36 0.49 W/M˚K @ 600˚C

Sil- O- CEL POWDER. Part No 1380-30

Insulating material. Part No.1380-80

Stop leak material. Part No. 1320-470

CEMENTS & POWDERS Continued

All values are average and subject to change without notice

53

Technical Services Division

The design and supply of forehearth and distributor systems

requires special skills and an intimate knowledge of glass-

making procedures.

The majority of our forehearth equipment is manufactured

in-house using industry standard systems and components.

This requires an intimate knowledge of many disciplines

including electronics, control systems, combustion systems

and general engineering. The following principal system

components can be supplied as an integral forehearth pack-

age or as discrete modules:

• Forehearth combustion systems

• Forehearth control systems

• Forehearth steelwork and cooling systems

• Forehearth refractory packages

54


FOREHEARTH& DISTRIBUTORSYSTEMS

The demands of modern glass production require that

the glass presented to the forming machine be

thermally homogenous, thermally stable and

at the correct temperature for the

forming process.

The design of the distributor and fore-

hearth is crucial in achieving these requirements.

PSR has developed a range of distributor and

forehearth systems that provide the highest

degree of thermal conditioning. These systems are currently

used by some of the world’s most advanced glass

producers.The System 500 Forehearth

The MF-16-MC Forehearth.

The System 500 Distributor

55


The range and complexity of PSR forehearth control systems

reflects the diversity of the glass industry. Many System 500

forehearth installations utilise simple discrete single loop

heat/cool PID controllers, a fact that emphasises the effec-

tiveness of System 500 technology. For advanced forming

techniques or complex plant layouts however PSR offer a

number of more advanced control solutions.

FOREHEARTHTEMPERATURECONTROLSYSTEMS

56


The combustion system is a vitally important part of the

glass conditioning process and yet many commercial sys-

tems are little different to those used on early Type K

forehearths. PSR’s MR-5000 combustion system is a radi-

cal yet proven approach and forms an essential part of

the System 500 family of glass conditioning products.

Forehearth combustion systems should be responsive,

highly controllable and efficient. These requirements can

only be achieved using a system that guarantees air to

gas ratio stability and high turndown. Conventional inspi-

rator type mixers are unable to offer the necessary

stability or efficiency necessary for the glassmaking

process.

MR5000COMBUSTIONSYSTEM

Parkinson-Spencer Refractories Limited

Holmfield, Halifax, West Yorkshire, UK. HX3 6SXTel: (44) (0) 1422 254472Fax: (44) (0) 1422 254473

Email: [email protected]: www.parkinson-spencer.co.uk

REFRACTORY CATALOGUE

PA R K I N S O N - S P E N C E R R E F R ACTO R I E S L I M I T E DHolmfield, Halifax, West Yorkshire, UK. HX3 6SXTel: (44) (0) 1422 254472Fax: (44) (0) 1422 254473Email: [email protected]: www.parkinson-spencer.co.uk

F.I.R.E. srl - REFRACTORYCATALOGUE · 2016. 2. 22. · 6 Dimension ‘X’ Part Holder Gasket...

Documents

Transcript of F.I.R.E. srl - REFRACTORYCATALOGUE · 2016. 2. 22. · 6 Dimension ‘X’ Part Holder Gasket...