Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System...

17
S.A. TECHNOLOGIES PTE LTD PROJECT REFERENCE FOR Fire & Gas System Another Quality Product from SATECH Client : Petronas Carigali Sdn Bhd (Schlumberger) Project : Bokor BODP-B ESP Project Completion Date : October 2010 Approx. Value : US$ 100,000.00 System Description Type : Integrated, Dual Redundancy SIL 3 PLC based Fire & Gas Panel Function : To monitor / control Fire Suppression System. Features : Dual Redundancy SIL 3 system for Zone 2 application. Configuration : Dual PLC controller and Ios Scope of Supply - Project management - Material selection and procurement. - Detail control logic analysis and design. - Installation and system wiring - Detail design for panel assembly - System assembly and production quality inspection. - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration, setup and programming of the controller - Final documentation (O&M Manual). - Export packing & delivery. Bokor Field Upgrade Dual Redundancy SIL 2 PLC Based Fire and Gas Panel SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Transcript of Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System...

Page 1: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : Petronas Carigali Sdn Bhd (Schlumberger)

Project : Bokor BODP-B ESP Project

Completion Date : October 2010

Approx. Value : US$ 100,000.00

System Description

Type : Integrated, Dual Redundancy SIL 3 PLC based Fire & Gas Panel

Function : To monitor / control Fire Suppression System.

Features : Dual Redundancy SIL 3 system for Zone 2 application.

Configuration : Dual PLC controller and Ios

Scope of Supply

- Project management - Material selection and procurement.

- Detail control logic analysis and design. - Installation and system wiring

- Detail design for panel assembly - System assembly and production quality inspection.

- Sizing calculation for utilities and system - System in-house simulation test

power consumption

- Factory acceptance testing.

- Detail configuration, setup and programming

of the controller - Final documentation (O&M Manual).

- Export packing & delivery.

Bokor Field Upgrade Dual Redundancy SIL 2 PLC Based Fire and Gas Panel

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 2: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : Petronas Carigali Sdn Bhd (Schlumberger)

Project : Bokor Field Upgrade

Completion Date : October 2008

Approx. Value : US$ 100,000.00

System Description

Type : Integrated, Dual Redundancy SIL 3 PLC based Fire & Gas Panel

Function : To monitor / control Fire Suppression System.

Features : Dual Redundancy SIL 3 system for Zone 2 application.

Configuration : Dual PLC controller and Ios

Scope of Supply

- Project management - Material selection and procurement.

- Detail control logic analysis and design. - Installation and system wiring

- Detail design for panel assembly - System assembly and production quality inspection.

- Sizing calculation for utilities and system - System in-house simulation test

power consumption

- Factory acceptance testing.

- Detail configuration, setup and programming

of the controller - Final documentation (O&M Manual).

- Export packing & delivery.

Bokor Field Upgrade Dual Redundancy SIL 2 PLC Based Fire and Gas Panel

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 3: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : PETROBAS

Project : “Lonestar “ TDS 2000

Completion Date : End of 2007

Approx. Value : US$ 30,000.00

System Description

Type : Integrated, intelligent type Fire and Gas system and ESD system

Function : On board Semi Submersible Drill Rig, detection and monitoring of fire and gas

alarms and/or activation devices. Interlinked ESD system is utilised for

Shutdown purpose.

Features : Safety and Shutdown system is designed to ABS Class Approval

Configuration : -

Scope of Supply

- Write out of system philosophy.

- Material selection

- Detail layout engineering and design.

- Sizing calculation for utilities and system

power consumption

- Detail design for field devices hook up

“Lonestar “ TDS 2000

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 4: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : Indorama Petrochem Limited

Project : Indorama PTA

Completion Date : March 2006

Approx. Value : US$ 400,000.00

System Description

Type : Integrated, intelligent type Fire and Gas System

Function : For detection of fire and gas alarms and/or activation devices

to SCADA system through modbus ethernet

Features : Safety system is designed to SIL 2 TUV requirement with HMI and sequence record

monitoring

Configuration : 1 master fire alarm panel, 1 repeater panel, 1 marshalling cabinet with ethernet and

modbus communication module. Galvanic isolators are provided for interfacing

between the panel and hazardous area detectors

Scope of Supply

- Project management - System assembly and production quality inspection.

- Detail control logic analysis and design. - System in-house simulation test

- Detail design for panel assembly and equipment - Factory acceptance testing.

mounting.

- Final documentation (O&M Manual).

- Sizing calculation for utilities and system

power consumption - Export packing & delivery.

- Detail configuration, setup and programming

of the controller

- Material selection and procurement.

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 5: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : Co Generation Co., Ltd. (COCO)

Project : COCO Phase IV

Completion Date : July 2004

Approx. Value : US$ 50,000.00

System Description

Type : Integrated addressable fire alarm panel

Function : For detection of fire alarms and/or activation annunciation devices

Features : Propierty communication link to building safety system

Configuration : 1 fire alarm panel and front mount annunciator

Scope of Supply

- Project management

- Detail control logic analysis and design.

- Detail design for panel assembly and equipment

mounting.

- Sizing calculation for utilities and system

power consumption

- Detail configuration, setup and programming

of the controller

- Material selection and procurement.

- System assembly and production

quality inspection.

- System in-house simulation test

- Factory acceptance testing.

- Final documentation (O&M Manual).

- Export packing & delivery.

COCO Phase 4 Fire Alarm Panel

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 6: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : PT Chiyoda International Indonesia

Project : BCD Project

Completion Date : July 2004

Approx. Value : US$ 50,000.00

System Description

Type : Addressable Fire Alarm Panel

Function : For detection of fire alarms and/or activation annunciation devices

Features : Propierty communication link to building safety system

Configuration : 5 sets fire alarm panels and addressable field devices

Scope of Supply

- Project management - System assembly and production quality inspection.

- Detail control logic analysis and design. - System in-house simulation test

- Detail design for panel assembly and equipment - Factory acceptance testing.

mounting.

- Final documentation (O&M Manual).

- Sizing calculation for utilities and system

power consumption - Export packing & delivery.

- Detail configuration, setup and programming

of the controller

- Material selection and procurement.

BCD Project Fire Alarm Panel

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 7: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : China National Offshore Oil Corporation (Consen Beijing)

Project : Bonan (WHPA) Project

Completion Date : February 2004

Approx. Value : US$ 50,000.00

System Description

Type : Integrated, intelligent type fire alarm panel

Function : For detection of fire alarms and/or activation devices

to SCADA system through modbus RS-485

Features : RS-485 modbus communication link to the SCADA system

Configuration : 1 fire alarm panel, 1 modbus communication module and galvanic isolators for

interfacing between the panel and hazardous area detectors

Scope of Supply

- Project management - System assembly and production quality inspection.

- Detail control logic analysis and design. - System in-house simulation test

- Detail design for panel assembly and equipment - Factory acceptance testing.

mounting.

- Final documentation (O&M Manual).

- Sizing calculation for utilities and system

power consumption - Export packing & delivery.

- Detail configuration, setup and programming

of the controller

- Material selection and procurement.

Bonan (WHPA) Project Addressable Fire Alarm Panel

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 8: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : National Petrochemical Public Co. Ltd. (Samsung Engineering Co. Ltd.)

Project : NPCX Polyethylene Project

Completion Date : December 2003

Approx. Value : US$ 20,000.00

System Description

Type : Integrated, conventional type fire alarm panels

Function : For detection of fire alarms or activation device and initiate notification sounders

and indicators

Configuration : 2 panels comprising of 1 Master Fire Alarm Panel with Annunciation facility and

Emergency Telephone and 1 Slave & Waterspray / Sprinkler Panel with Emergency Tel.

Scope of Supply

- Project management

- Detail control logic analysis and

design.

- Detail design for panel assembly and

equipment mounting.

- Sizing calculation for utilities and

system power consumption

- Detail configuration, setup and

programming of the controller

- Material selection and procurement.

- Installation and system wiring

- System assembly and production

quality inspection.

- System in-house simulation test

- Factory acceptance testing.

- Final documentation (O&M Manual).

- Export packing & delivery.

NPCX Polyethylene Master Fire Alarm Panel

and Slave & Waterspray / Sprinkler Panel

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 9: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : Pak Arab Pipeline Co. Ltd. (China Petroleum, Eng. & Construction Corp.)

Project : White Oil Pipeline Project (WOPP)

Completion Date : December 2003

Approx. Value : US$250,000.00

System Description

Type : Integrated, PLC based controller for hazardous area loops, addressable

fire alarm panel for safe area loops

Function : For detection of fire alarms or activation device and initiate the Fire Water Pumps,

notification sounders and indicators

Features : Facility for monitoring and operating via front panel mounted workstation, modbus

link to DCS is preconfigured and set, mosaic display for zones

Configuration : 3 systems, each comprising of PLC Fire Detection panel, workstation,

addressable fire alarm panel and all related field equipment

Scope of Supply

- Project management

- Detail control logic analysis and design.

- Detail design for panel assembly and

equipment mounting.

- Sizing calculation for utilities and system

power consumption

- Detail configuration, setup and programming

of the controller

- Material selection and procurement.

- Installation and system wiring

- System assembly and

production quality inspection.

- System in-house simulation test

- Factory acceptance testing.

- Final documentation (O&M Manual).

- Export packing & delivery.

White Oil Pipeline Fire Detection & Alarm Panels (Typical)

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 10: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : China National Offshore Oil Corporation (ABB Shanghai Limited)

Project : Panyu FPSO Project

Completion Date : October 2002

Approx. Value : US$500,000.00

System Description

Type : Integrated, conventional fire alarm panel and microprocessor based gas controllers

Function : For detection of fire alarms and/or activation device

Features : Voting outputs to ESD system is connected, Dual RS232 link to ESD system

is preconfigured and set.

Configuration : Fire & Gas Detection System comprising of 1 Addressable Fire Alarm Panel,

2 Gas Controller and all the related field equipment

Scope of Supply

- Project management

- Detail control logic analysis and design.

- Detail design for panel assembly and

equipment mounting.

- Sizing calculation for utilities and system

power consumption

- Detail configuration, setup and programming

of the controller

- Material selection and procurement.

- Installation and system wiring

- System assembly and

production quality inspection.

- System in-house simulation test

- Factory acceptance testing.

- Final documentation (O&M Manual).

- Export packing & delivery.

Panyu FPSO Fire & Gas Detection Panel

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 11: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : National University of Singapore

Project : NUS Microelectronics Lab Upgrade

Completion Date : August 2000

Approx. Value : US$30,000.00

System Description

Type : Integrated, microprocessor based controller for gas leak monitoring

Function : To monitor any gas leakage .

Configuration : 1 panel connected to 13 nos. of gas detector to monitor leakage of specific gases

(H2, NH3, SiH4, SiF4 & GeH4).

Scope of Supply

- Project management

- Detail control logic analysis and design.

- Detail design for panel assembly and equipment

mounting.

- Sizing calculation for utilities and system

power consumption

- Detail configuration, setup and programming

of the controller

- Material selection and procurement.

- Installation and system wiring

- System assembly and production quality inspection.

- System in-house simulation test

- Factory acceptance testing.

- Final documentation (O&M Manual).

- Export packing & delivery.

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 12: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : "Vietsovpetro" Joint Venture

Project : White Tiger Field, MSP-1 Platform

Completion Date : May 2000

Approx. Value : US$800,000.00

System Description

Type : Integrated addressable and conventional fire alarm panels

Function : To monitor fire occurance and initiate the relevant alarm

notification equipment

Configuration : Fire Detection System comprising of a Conventional Fire Detection Section,

an Addressable Fire Detection Section & all related field equipment.

Scope of Supply

- Project management

- Detail control logic analysis and design.

- Detail design for panel assembly and

equipment mounting.

- Sizing calculation for utilities and system

power consumption

- Detail configuration, setup and programming

of the controller

- Material selection and procurement.

- Installation and system wiring

- System assembly and

production quality inspection.

- System in-house simulation test

- Factory acceptance testing.

- Final documentation (O&M Manual).

- Export packing & delivery.

White Tiger Field MSP-1 Fire Detection System

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 13: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : Marine Drilling Management Company

Project : Marine 500 Project

Completion Date : January 1999

Approx. Value : US$500,000.00

System Description

Type : Integrated addressable fire detection controller and gas detection controller

Function : To monitor fire or gas occurance and initiate the relevant alarm

to Public Address System and relevant sounders and beacons

Configuration : Fire & Gas alarm panel comprising of an addressable Fire Detection Section &

11 units of CH4 & H2S Gas Detection Section & Alarm Box

Scope of Supply

- Project management

- Detail control logic analysis and design.

- Detail design for panel assembly and

equipment mounting.

- Sizing calculation for utilities and system

power consumption

- Detail configuration, setup and programming

of the controller

- Material selection and procurement.

- Installation and system wiring

- System assembly and

production quality inspection.

- System in-house simulation test

- Factory acceptance testing.

- Final documentation (O&M Manual).

- Export packing & delivery.

Marine 500 Fire & Gas Detection System

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 14: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : Public Utilities Board, Singapore

Project : Replacement of Chlorine Gas Leak Detection

Systems at 8 Service Reservoirs

Completion Date : November 1998

Approx. Value : US$300,000.00

System Description

Type : Integrated gas monitoring system

Function : To monitor the chlorine gas through two sensor, also as electronic measuring

and display device

Configuration : Eight (8) Chlorine Gas Leak Detection Systems complete with illuminated warning

signs, rotating beacons and sirens

Scope of Supply

- Project management

- Detail control logic analysis and design.

- Detail design for panel assembly and equipment

mounting.

- Sizing calculation for utilities and system

power consumption

- Detail configuration, setup and programming

of the controller

- Material selection and procurement.

- Installation and system wiring

- System assembly and production quality inspection.

- System in-house simulation test

- Factory acceptance testing.

- Final documentation (O&M Manual).

- Export packing & delivery.

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 15: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : Sarawak Shell Berhad / Sabah Shell Petroleum Co. Ltd

Project : LCOT MFAP Replacement Project at Labuan Crude Oil Terminal

Completion Date : October 1998

Approx. Value : US$600,000.00

System Description

Type : Integrated PLC based controller and addressable fire alarm panels

Function : To monitor fire, flame or gas occurance and initiate the relevant alarm

notification equipment

Features : Facility for monitoring from SCADA system workstation, events printout from

printer, modbus communication to DCS, 32 windows annunciator to facilitate critical

alarms

Configuration : 1 panel comprising of LCOT Addressable Master Fire Alarm Panel and EWTP

Addressable Local Fire Alarm Panel

Scope of Supply

- Project management - Factory acceptance testing.

- Detail control logic analysis and design. - Final documentation (O&M Manual).

- Detail design for panel assembly and equipment - Export packing & delivery.

mounting.

- Sizing calculation for utilities and system

power consumption

- Detail configuration, setup and

programming of the controller

- Material selection and procurement.

- Installation and system wiring

- System assembly and

production quality inspection.

- System in-house simulation test

LCOT MFAP Replacement Fire & Gas Detection System

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 16: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : Xiamen Paktank Company (Rotary Engineering Pte Ltd)

Project : Xiamen Storage Terminal

Completion Date : February 1997

Approx. Value : US$50,000.00

System Description

Type : Integrated microprocessor controlled gas detection.

Function : To detect gas leakage and initiate the notification equipment.

Configuration : 1 panel comprising of Gas Detection System

Scope of Supply

- Project management

- Detail control logic analysis and design.

- Detail design for panel assembly and equipment

mounting.

- Sizing calculation for utilities and system

power consumption

- Detail configuration, setup and programming

of the controller

- Material selection and procurement.

- Installation and system wiring

- System assembly and production quality inspection.

- System in-house simulation test

- Factory acceptance testing.

- Final documentation (O&M Manual).

- Export packing & delivery.

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)

Page 17: Fire & Gas System - WordPress.com · - Sizing calculation for utilities and system - System in-house simulation test power consumption - Factory acceptance testing. - Detail configuration,

S.A. TECHNOLOGIES PTE LTD

PROJECT REFERENCE FOR

Fire & Gas SystemAnother Quality Product from SATECH

Client : Rotary Engineering Co Pte Ltd

Project : SRC-RCC

Completion Date : February 1995

Approx. Value : US$500,000.00

System Description

Type : Integrated Fire Alarm Panel and Gas Detection controller

Function : For interfacing between the Fire Alarm Panel, Gas Detection controller

and the field equipment

Configuration : 1 panel for Fire & Gas Marshalling Cabinet

Scope of Supply

- Project management

- Detail control logic analysis and design.

- Detail design for panel assembly and equipment

mounting.

- Sizing calculation for utilities and system

power consumption

- Detail configuration, setup and programming

of the controller

- Material selection and procurement.

- Installation and system wiring

- System assembly and production quality inspection.

- System in-house simulation test

- Factory acceptance testing.

- Final documentation (O&M Manual).

- Export packing & delivery.

SATECH Proj. Ref. - Fire & Gas System (Ed 040710 1100Hr)