www.tajimaaustralia.com.auFor Further information on this Product please contact Tajima Australia Pty Ltd on (03)9484 5898.

Fire Fighter: Madeira’s complete range of Fire Resistant Thread, Bobbin Thread and Backing

When safety matters, Madeira brings the solution. Fire Fighter is a �ame resistant range encompassing embroidery threads, bobbin thread and baking. Choose Fire Fighter for all your Protective needs - safety clothing, aerospace cushions, �re service, electric utility, re�nery or racing essentials.

Embroidery Thread and Bobbin Thread #40

Made of 100% Aramid, which contains Nomex® �bers from Dupont, Fire Fighter is designed speci�cally for the com-mercial embroidery market. This thread boasts no melt point and o�ers the same Madeira brand quality and in-stitch performance as other popular Madeira thread types. Characteristics:100% Aramid®24 color optionsHeat resistant up to 572˚FFire resistantColors correspond to Polyneon, for Pantone® matching1,000 yard spools or 2,500m cones#80/12 large eye needle recommended for best resultsComplies with IS O-6941 and IS O-15025Oeko-Tex certi�ed

Instructions for Use:Fire Fighter may be used in designs digitized for 40 weight thread. A #80/12 large eye needle is recommended.To care for a product on which Fire Fighter has been used, wash the garment in hot water up to 95˚C/203˚F.Bleach is ok, as long as it is diluted. Fire Fighter may be ironed up to 200˚C/392˚F on reverse side. The �reresistance capabilities of Fire Fighter thread will not decrease after washing.

E-Zee Fire FIghter Backing

100% AramidSoft, Lightweight and breathable, provides comfortable wear as well asmaximum protectionOeko-Tex certi�ed, standard 100, product class IIWeight: 55g/m²Colour: Yellow (natural Aramid colour)

Instructions: Special Cut-Away - use high quality special aramid scissors from MAdeira to achieve the perfect cut of E-Zee Fire Fighter.

CONFIDENCEIN TEXTILES

Tested for harmful substancesaccording Oeko-Tex Standard 100

Test No. 95.0.5859 · Fl Hohenstein

95˚C PC l