Finite Element Analysis of PNC - Copy
-
Upload
raj-vaibhav -
Category
Documents
-
view
197 -
download
1
Transcript of Finite Element Analysis of PNC - Copy
![Page 1: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/1.jpg)
Finite Element Analysis of Polymer Nano Composites
Presented byRaj Kiran (20123025)
Nayan Patil (20123116)Project AdvisorDr. D.K. Shukla
Assistant Professor , MED
![Page 2: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/2.jpg)
Objectives to be achieved
• Analysis of polymer nanocomposites using commercial finite element software ABAQUS.
• To learn about nanocomposites, their modelling and how nanofillers affect their properties.
• Different mechanical properties will be studied.
![Page 3: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/3.jpg)
B.Tech-7th Semester Work
Following things have been completed in last semester-
• Learning ABAQUS through different tutorials. • Literature review of polymer nanocomposites. • To learn about geometric modelling of nanofillers. • Finally to prepare the geometric model in
ABAQUS.
![Page 4: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/4.jpg)
B.Tech-8th Semester Work Plan
Following things will be completed by end of this semester-
• To carry out the analysis with spherical and ellipsoidal shaped inclusions and compare the results.
• To extend the study to fracture mechanics and comment on Stress Intensity Factor.
![Page 5: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/5.jpg)
What is a polymer?• Polymer is a large molecule composed of many repeated
subunits. • Synthetic and natural polymers play an essential role in
everyday life.• Synthetic plastics such as polystyrene • Natural biopolymers such as DNA and proteins
Polystyrene DNA
![Page 6: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/6.jpg)
Composite• Composite material is a material made from two or more constituent materials
with significantly different physical or chemical properties that, when combined, produce a material with characteristics different from the individual components.
• Properties of composites are function of the properties of constituent phases, their relative amounts and geometry of dispersed phase.
• Wood which consists of strong cellulose fibres surrounded by a material known as lignin.
![Page 7: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/7.jpg)
Basics of Composites
• Matrix • Continuous phase • Transfers stresses to other phases • Classified into: MMC, CMC, PMC• Dispersed phase (Reinforcing phase) • Remains in discontinuous form in matrix • Stronger than matrix, enhances matrix properties • Particulate materials, fibrous materials
![Page 8: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/8.jpg)
What are Nano Composites? Nano composites are a class of materials in which one or
more phases with nano scale dimensions ( 10nm-100nm) are embedded in a metal, ceramic or polymer matrix.
Why Nano composites? • High surface to volume ratio • Strength is increased • Heat resistant
![Page 9: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/9.jpg)
Polymer Nano Composites
• Combination of a polymer matrix and inclusions that have at least one dimension(i.e. length, width, or thickness) in nanometer size range are known as polymer nano composites
• Polymers are light weight• Corrosion resistant materials• Matrix can be of polymeric materials such as
thermoplastics, thermosets or elastomers.
![Page 10: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/10.jpg)
Dispersed Phase
• Nanoscale reinforcing phase can be grouped into 3 categories
• Nanoparticles • Nanotubes • Nanoplates
• Depending on type of Nanoparticles added, the mechanical, electrical, optical and thermal properties of polymer nanocomposites can be altered
![Page 11: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/11.jpg)
Types of Nano Phases
Nanoparticles Nano Tubes
Nano Plates
![Page 12: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/12.jpg)
Methodologies for Analysis of Nano composites
• Molecular Dynamics • Molecular dynamics (MD) is a computer simulation of physical
movements of atoms and molecules.
• Multiscale Modeling • Modeling in which multiple models at different scales are used to
model different phases of a system.
• Finite Element Method • In mathematics, the finite element method (FEM) is a numerical
technique for finding approximate solutions to differential equations.
• In this project we will adopt the methodology of FEM for analysis of nanocomposites using analysis software ‘ABAQUS’.
![Page 13: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/13.jpg)
Finite Element Method
Finite element analysis of the composites requires:
• Modeling of Representative Volume Element• Material properties• Suitable loads and boundary conditions• Interpretation of results
![Page 14: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/14.jpg)
What is Representative Volume Element?
• In composites, it is the smallest volume over which if a measurement is made that will yield a value representative of the whole.
• In other words, they represent a composite as a whole, give an over all idea about the composite.
• They also reduce the overall computational time.
![Page 15: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/15.jpg)
More About RVE
• They have the same effective Young’s Modulus and Volume Fraction as that of the composite.
Square array with square RVE Hexagonal Array with Triangular RVE
![Page 16: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/16.jpg)
Different Types of Nanoparticles
Different nanoparticles impart different properties to the nanocomposites, so according to application these particles are chosen. Some of these are-
• Carbon nanofibres• Carbon nanotubes• Nanoaluminium Oxide• Nanotitanium Oxide
![Page 17: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/17.jpg)
Properties of Nano Particles Properties Titanium Oxide Aluminium Oxide
Density (g/cc) 3.97 4.00
Elastic Modulus (GPa) 288 375
Poisson’s Ratio 0.29 0.23
![Page 18: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/18.jpg)
Synthesis of Polymer Nanocomposites
• Sol gel process: Very versatile and simple process. Metal precursor is dissolved in a solvent called sol which is converted into a 3-D network called gel by inducing a reaction known as hydrolysis.
• In Situ process
![Page 19: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/19.jpg)
Cost of Nanoparticles Quantity Aluminium Oxide Titanium Oxide
50 gm Rs. 7830.71 19406.76
• Cost of nanoparticles is so high that it is not practical and economically possible to carry out experiments directly on the nanocomposites and determine the properties through it by hit and trial method. So, using FEA is a good approach.
Source: www.sigmaaldrich.com
![Page 20: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/20.jpg)
Modelling of Polymer Nano Composites
• For FEA geometry of the RVE is required which can represent the composite as a whole.
• RVEs have been developed using algorithm known as Random Sequential Adsorption Algorithm.
![Page 21: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/21.jpg)
Main Steps of the RSA Algorithm
• Generation of a filler particle with given dimensions.
• Check that the filler resides within the RVE.• Check that the filler is not penetrating through
any other filler particles.• Update the current volume fraction of RVE.• Repeat the above steps till desired volume
fraction is reached.
![Page 22: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/22.jpg)
Start
I/P Parameters Radius,S.Vol.Fra
Generate Random
Coordinate
Inside RVE?
Draw filler
Penetrating with others?
Update Volume Frac
Vol. Frac=S.Vol.Fra
Stop
NO
YESYES
NO
YES
NO
Flowchart of RSA Algorithm
![Page 23: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/23.jpg)
Generation of the RVE• The RVE was generated using RSA algorithm to
provide for user specified minimum distance between neighbour fillers.
• The centre distance was kept 3r, r is the radius of the filler i.e. 4 nm.
• If the surface of any filler penetrates into that of other or that of the RVE then it is discarded.
• Using above steps MATLAB code was developed and random co-ordinates were generated and 2D and 3D RVEs were modelled.
![Page 24: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/24.jpg)
3-D RVEs With Random Spheres
Cubic RVE with of side 424 nm and weight fraction 1% randomly generated spherical inclusions
![Page 25: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/25.jpg)
3-D RVEs With Random Ellipsoids
Cubic RVE with of side 424 nm and weight fraction 1% randomly generated ellipsoidal inclusions
![Page 26: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/26.jpg)
Properties of Materials
Property Matrix Filler Young’s Modulus 3.054 GPa 375 GPa
Poisson’s Ratio 0.375 0.23
•Nanofillers of Alumina and Matrix of Epoxy has been used for analysis.
![Page 27: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/27.jpg)
MATLAB and PYTHON Script
• It is very tedious and cumbersome process to insert each and every particle in the matrix. So, we directly interacted with kernel of ABAQUS instead of using GUI.
• PYTHON script was written to solve this problem.
• MATLAB codes were developed to generate the script!
![Page 28: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/28.jpg)
RVEs used for Analysis
• We have used RVEs with different weight fractions with same length for the analysis purpose.
• Different weight fractions were obtained by changing the number of inclusions.
• Weight fractions ranged from 0.5% to 4% and corresponding number of particles ranged from 30 to 246.
![Page 29: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/29.jpg)
Boundary Conditions
• For the analysis symmetrical boundary conditions were used.
• On three adjacent faces of the RVE, the displacement components normal to the faces were constrained so as to prevent rigid body motion.
• Two of the remaining faces were forced to remain parallel to themselves during deformation.
![Page 30: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/30.jpg)
Boundary Conditions...
•All the nodes of the remaining face were given a fixed displacement of 5nm.
Symmetrical Boundary Conditions
![Page 31: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/31.jpg)
Element Convergence Test• Element Convergence test was carried out for
weight fraction 0.5% with 10 number of particles.
It was concluded that 200000 elements were sufficient for analysis.
0 50000 100000 150000 200000 250000 300000 3500003.8
3.805
3.81
3.815
3.82
Number of Elements
E in
GPa
![Page 32: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/32.jpg)
A glimpse of RVEs used
Weight fraction 0.5% with 30 inclusions Weight fraction 1% with 60 inclusions
![Page 33: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/33.jpg)
More RVEs
Weight fraction 2% with 191 inclusions Weight fraction 4% with 246 inclusions
![Page 34: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/34.jpg)
RVE Convergence Test• Average Young’s Moduli were calculated for
different orientations with different weight fractions and different number of inclusions.
• So, the RVEs converged at 30 inclusions and corresponding size was 771 nm. So 771 nm was taken as RVE size and weight fraction was varied.
For 0.5% w.f.
![Page 35: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/35.jpg)
Comparison of E/Em
It is concluded that as the weight fraction of spherical and ellipsoidal inclusions increase Young’s Modulus of the composite also increases in same ratio.
![Page 36: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/36.jpg)
Non-Linear Analysis•After elastic analysis was carried out non-linear response was studied for different weight fractions. •For practical purposes it becomes necessary to know about the plastic behaviour of the PNCs.•Initially the response of the PNCs is linear from which elastic modulus can be calculated.•As weight fraction increases the slope increases indicating increase in elastic modulus.
![Page 37: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/37.jpg)
Non-Linear Response
Stress- Strain curve for PNCS for different weight fractions
![Page 38: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/38.jpg)
Fracture Mechanics
• Assumes there is always a crack in materials.• Cracks may exist due to some manufacturing
defects, during welding or due to inclusion of some foreign particles.
• Due to these cracks and flaws the strength of the material reduces.
• These inherent flaws effect the life of the structure and their performance.
![Page 39: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/39.jpg)
Modes of Fracture Failure
• Mode-I Fracture: Opening mode and tensile stress is applied normal to the crack surface.
• Mode-II Fracture: Sliding mode and shear stresses act parallel to the plane of crack.
• Mode-III Fracture: Tearing mode and displacement is parallel to the crack front and thus causes tearing.
![Page 40: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/40.jpg)
Modes of Fracture Failure
Three modes of fracture failure
![Page 41: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/41.jpg)
Stress Intensity Factor• If a plate having centre crack of length 2a is
loaded by far field stress σ , then stresses at crack tip are much higher than the applied stress.
Infinite plate having centre crack of length 2a
![Page 42: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/42.jpg)
SIF for mode-I• Stress Intensity Factor also known as SIF gives
an idea about the state of stress at the crack tip.• SIF for mode-I loading for infinite plate having
edge crack of length a is given as : KI = σ√πa
• For plate of finite dimensions it is given as: KI = f(a/w) σ√πa Where w is the width of plate
![Page 43: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/43.jpg)
Finite Element Modeling of Cracks• Here, we found out KI only for 2D RVEs.• 2D cracks are modeled by lines while 3D
cracks as planes.
Crack in 2D RVE
![Page 44: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/44.jpg)
Finite Element Modeling of Cracks
• This line or plane is known as SEAM.
• Analysis is performed using seam as a crack and this seam creates edges that are free to move apart.
• Crack front is the forward part of the crack.
![Page 45: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/45.jpg)
Loading and Boundary Conditions• Bottom edge was fixed and load was applied
on the upper edge of 1E-6 N/nm2.
Load and Boundary Conditions for Mode-I loading
![Page 46: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/46.jpg)
Evaluation of KI for Spherical and Elliptical inclusions
• Once the crack is modeled, load is applied and boundary conditions are imposed KI was calculated and compared for 2D RVEs at different area fractions for spherical and elliptical inclusions.
• It was observed that the value of KI decreases as the area fraction increases upto a certain area fraction and then became constant.
![Page 47: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/47.jpg)
Comparison of KI for Spherical and Elliptical inclusions
Comparison of KI for spherical and elliptical inclusions
![Page 48: Finite Element Analysis of PNC - Copy](https://reader034.fdocuments.net/reader034/viewer/2022051706/587c58511a28abc62c8b7607/html5/thumbnails/48.jpg)
THANK YOU !