Gold contact area

Gold marking

S5200/S5200/ S5600S5600

FPT-507107-PW

BL00485-200(1) E

A. Loading the batteries1. Check that the camera is

turned off (set the Powerswitch to “OFF”) beforeopening the battery cover.

2. Load the batteries correctlyas indicated by the polarityicons.Press on the battery cover topush the batteries down.Slide the battery cover closed.

1. Align the gold marking on thexD-Picture Card slot with thegold contact area on the xD-Picture Card™ and push thecard firmly all the way intothe slot.Close the slot cover.

B. Setting up the camera1

2. To turn the camera on, setthe Power switch to “q” or“w”.

Press the “MENU/OK” buttonto set the date and time.

1

2

D. Viewing picture1. Set the Power switch to “w”.2. Press “d ” or “c ” to move

through your images.

Camera Controls

Picture Taking Refer to Owner’s Manual for more detailed instructions

Still images that can be viewed on the FinePix S5200/FinePix S5600You can use this camera to view still images recorded on the FinePixS5200 / FinePix S5600 or sti l l images (excluding someuncompressed images) recorded on a FUJIFILM digital camera thatsupports xD-Picture Card.

Exposure compensation

button

Focus mode selector button

Continuous shooting

button

Shutter button

Focus mode selector lock switch

Mode dial

Still photography

Movie recording

Power switch

Playback mode

Power-OFF

Photography mode

Auto Programmed Auto

Manual

Anti-blur

Aperture-priority Auto

Shutter-priority Auto

Movie

Natural light

Night

Portrait

Landscape

Strap mount

Slot cover

USB socket (mini-B)DC IN 5V (power input) socket

A/V OUT (Audio / Visual output) socket

Microphone

Flash

AF-assist illuminator

Self-timer lamp

Speaker xD-Picture Card slot

Lens

W (Wide zoom) button

Photo mode ( ) button

DISP/BACK button

Low light viewbutton

Battery cover

MENU/OK button

4-direction (abdc) button

T (Tele zoom) button

Strap mount

Viewfinder (EVF)

Diopter adjustment dial

EVF/LCD (monitor selector) button

Tripod mount

LCD monitor

Indicator lamp

d / Macro button

c / Flash button

Playback modePhotography modea / Erase button

2

3 3. You can select your preferreddate format.Press “d” or “c” to select thedate format, Year, Month,Day, Hour or Minute.Press “a” or “b” to correct thesetting. Press the “MENU/OK” buttonafter you complete the setting.✽ Refer to owner’s manual for

date/time setup.

C. Taking pictures1. Set the Power switch to “q”

and set the Mode dial to“B”.

2. Press the shutter button downhalfway to adjust the focus.

3. Press the shutter button downfully to take a picture. Thecamera makes a “Click” soundand takes the picture.

20072006200520042003

1 1 21 00A M

Y Y. M M . D DY Y. M M . D D

S E TS E T C A N C E LC A N C E L

DAT E / T I M EDAT E / T I M E

1

Bebeep Click

2 3

1 2

Viewing images on your PC

8.FinePixViewer starts up automatically.

The “Found New Hardware” help message appears in thebottom-right corner of your screen. This message will closewhen the settings are completed. No action is required.FinePixViewer starts up automatically.

Windows XP

Windows 98/98 SE/Me/2000 Professional

For more informationRefer to “How to use FinePixViewer” in the HELP menu, or chapter 5and 6 in the Owner’s Manual, or visit Fujifilm “Q&A Search” in thefollowing website. ( http://home.fujifilm.com/products/digital/ ) For Macintosh users, refer to chapter 5 and 6 in the Owner’s Manual.

3. Turn your camera off.

4. If you have one, plug the AC power adapter connector intothe “DC IN 5V” socket on the camera and then plug theadapter itself into the main power outlet, otherwise be sureyour batteries are fresh and charged.

5. Turn your PC on.

6. Connect the camera to the PC using the USB cable (mini-B).

7. Set the Power switch to “w”.

A. Install SoftwareDo not connect the camera to your PC until the softwareinstallation is completed.

1. Turn on your PC and start up Windows.●! Users of Windows 2000 Professional or Windows XP should log in

by using a system administrator account (e.g. “Administrator”).

2. Quit all other active applications until no applications areshown in the taskbar.

3. Load the enclosed CD-ROM into the CD-ROM drive. Theinstaller starts up automatically.

4. The Setup screen appears.Click the [Install ingFinePixViewer] button.

5. After installation completed, press [Close] button.

B. Connect the Camera to your PC1. Load an xD-Picture Card containing photographed images

into your camera.

2. Set the Power switch to “w” to turn the camera on.Select “¶” DSC in “ò” USB MODE in the “˜” SET-UPmenu (Refer to “USING THE SET-UP SCREEN” in theowner’s manual).

D S CD S C

N T S CN T S CN T S CN T S C

S E TS E T

S E TS E TS E TS E T

E N G L I S HE N G L I S H

12

34

C. Save Images1. The Save Image Wizard starts up. Click the [Start] button.

2. Check that the files are downloaded from the camera to yourPC and that a folder with the date is created.

Ex. \My Documents \ My Pictures \ 2005_0824

D. View Images1. Click the [Show List of Images]

button.

2. Select “Preview” in the View menu to display an enlarged image.

A.Install SoftwareA.Install Software

B.Connect a Camera to PCB.Connect a Camera to PC

C.Save ImagesC.Save Images

USB socket

Camera PC