Final Review Questions
-
Upload
kostassierros9374 -
Category
Documents
-
view
107 -
download
1
Transcript of Final Review Questions
![Page 1: Final Review Questions](https://reader036.fdocuments.net/reader036/viewer/2022082623/54669949b4af9ff9748b45ac/html5/thumbnails/1.jpg)
1) If cable CB is subjected to a tension that is twice
that of cable CA , determine the angle for equilibrium of the 10-kg cylinder.Also, what are the tensions in wires CA and CB?
![Page 2: Final Review Questions](https://reader036.fdocuments.net/reader036/viewer/2022082623/54669949b4af9ff9748b45ac/html5/thumbnails/2.jpg)
2) The member is subjected to a force of F = 6 kN. If θ = 45°
, determine the moment produced by F about point A.
![Page 3: Final Review Questions](https://reader036.fdocuments.net/reader036/viewer/2022082623/54669949b4af9ff9748b45ac/html5/thumbnails/3.jpg)
3) The jib crane is supported by a pin at C and rod AB.
If the load has a mass of 2 Mg with its center of mass located
at G, determine the horizontal and vertical components of
reaction at the pin C and the force developed in rod AB on the crane when x = 5 m.
![Page 4: Final Review Questions](https://reader036.fdocuments.net/reader036/viewer/2022082623/54669949b4af9ff9748b45ac/html5/thumbnails/4.jpg)
4) The internal drag truss for the wing of a light
airplane is subjected to the forces shown. Determine the
force in members BC, BH, and HC, and state if the
members are in tension or compression.
![Page 5: Final Review Questions](https://reader036.fdocuments.net/reader036/viewer/2022082623/54669949b4af9ff9748b45ac/html5/thumbnails/5.jpg)
5) The beam has a weight w per unit length. Determine
the internal normal force, shear force, and moment at point
C due to its weight.