Final Mass
Transcript of Final Mass
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 1/17
LED INDICATOR FOR MONITORING
HEARTBEAT
UNDER THE GUIDANCE OF: ___Mr.S. RAJKUMAR, M.E., Ph.D
PREPARED & PRESENTED BY:
MANOJ KUMAR.CPREMRAJAN.N &
NISHOK.V.L
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 2/17
ABSTRACT
Heart rate monitor was used by a person who cares about theirheart to ensure that they have a normal heart rate. The early
detection of the abnormal heart rate can help to prevent from the
serious disease.
In the sport field, the heart rate monitor is needed to determine
the range of heart rate.
This range can be monitored with optimum exercise performed
by the athlete via SMAC protocol(IEEE 802.15.4).
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 3/17
Alcohol tests using this methodology areadministered by having the donor blow into the EBTmouthpiece for 6 seconds or until adequate amount ofbreath has been obtained.
Here we are using three sensors which are heartbeat , bloodpressure, drug-detection sensors. These three helps to
monitor the heart rate of a person.
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 4/17
HARDWARE REQUIREMENTS
MICROCONTROLLER
HEART BEAT SENSOR
PRESSURE SENSORDRUG DETECTION SENSOR
LED’S
UARTPC
SMAC PROTOCOL
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 5/17
SOFTWARE REQUIREMENTS:
KEIL COMPILER
VISUAL BASIC
EMBEDDED C
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 6/17
EXISTING SYSTEM
The ability to monitor the health status of elderly patients
or patients undergoing therapy enables significant
advantages in terms of both cost and comfort of the subject
The research activity is concerned with the
development of a novel wearable biomedical signal
sensor device for monitoring health conditions at
home.
Human biomedical parameters can be registered and
analyzed continuously during home work activities
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 7/17
This paper presents a current invention for monitoring the athletes’
heart rate during training or exercise session. A bracelet with different
color code of Light Emitting Diode (LED) is designed as a wrist heart
rate monitor.
The portable color coded heart rate monitoring system is design tobe noninvasive, lightweight and easily worn so that the athlete feel
comfortable and will not impeded their activities.
Future works will be focused on reducing the size of LEDstrips/bracelet to be worn as a wrist band and improving both of the
data communication (Zigbee and ANT+) between the transmitter and
receiver.
PROPOSED SYSTEM
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 8/17
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 9/17
RECIEVER BLOCK DIAGRAM
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 10/17
RECIEVER
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 11/17
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 12/17
LED
INDICATION
START
INITIALIZE MC
AT89S52
IS DRUG,
HEART
BEAT,BP NORMAL?
GREEN LED
RED LED(ABNORMAL)
YELLOW LED
(SEMI
NORMAL)
YES
NO
STOP
SEND
INFORMATION
TO PC
FLOW CHART
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 13/17
Lightweight and easily worn so that the athlete feel
comfortable and will not impeded their Activities.
This device also gives an advantage to coach to easily get the
information about athlete heart rate condition by only
monitoring the LED indicator on bracelet wearing by athletes
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 14/17
DISADVANTAGES
The system does not prevent the noise in ECG waveform
The priority is not given to the patients during health conditions
The health condition of the patients is not monitored when the patients areusing mobile
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 15/17
APPLICATION
It is used in Medical fields to monitor the patients health condition
It is used in sports
Military purposes
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 16/17
CONCLUSION
The hear rate is monitored in different conditions using the sensors
and the
led’s and the output is shown in the receiver part ie., in the pc .
Thus the overall explanation in the review part is shown in the demo.
8/2/2019 Final Mass
http://slidepdf.com/reader/full/final-mass 17/17
THANK YOU