FIN

1
Single-stage centrifugal pumps. Specially designed for high flows supplies. Fitting of prefilter possible. Aplications: Recycling of treated and soluble water (chloric water, salted water and so on). Irrigation with additives. Material: Pump body and diffuser in polypropilen. Motor shaft in stainless steel AISI 420. Impeller and diffuser in glass loaded polymer. Mechanical seal in graphite and alumine. Motor mounting and motor housing in aluminium L-2521. Windings impregnated with epoxy resin. Motor: Asynchronous, two poles. IP 55 protection. Class F insulation. Continuous operation. Single phase version built-in thermal protection. Complete dielectric insulation between hydraulic system and motor. espa Fin espa ÐÁÑOÄOÓH ÓÔÉÓ ÁÍÔËÉÅÓ ÐÉÓÉÍÁÓ & ÕÄÑÏÌÁÓÁÆ espa 1

description

 

Transcript of FIN

Page 1: FIN

Single-stage centrifugal pumps. Specially designed for high flows supplies. Fitting of prefilter possible. Aplications:Recycling of treated and soluble water (chloric water, salted water and so on). Irrigation with additives. Material: Pump body and diffuser in polypropilen. Motor shaft in stainless steel AISI 420. Impeller and diffuser in glass loaded polymer. Mechanical seal in graphite and alumine. Motor mounting and motor housing in aluminium L-2521. Windings impregnated with epoxy resin.

Motor: Asynchronous, two poles. IP 55 protection. Class F insulation. Continuous operation. Single phase version built-in thermal protection. Complete dielectric insulation between hydraulic system and motor.

espa

Finespa

ÐÁÑOÄOÓH ÓÔÉÓ ÁÍÔËÉÅÓ ÐÉÓÉÍÁÓ & ÕÄÑÏÌÁÓÁÆespa

1