Filter Housings Selection Guide - NeoLogic Solutions
1
Filtration Division SOLUTIONS © Copyright 2013 NeoLogic Solutions. All Rights Reserved. Manufacturer reserves the right to make changes without notice. Jumbo Filter Housings Multi-Cartridge Filter Housings Filter Housings Selection Guide £ Made in USA with heavy-duty 304L or 316L stainless steel construction £ V-band clamp or swing bolt closures £ SEVEN sizes available using 1, 3, 4, 5 or 8 cartridges, flow rates up to 1200 gpm £ Standard with pressure gauges and mounting legs £ Optional 3M™ Scotchkote™ 134 Fusion Bonded Epoxy Coating for SEA WATER applications 10012A020614 9450 SW Gemini Dr, ECM #83358, Beaverton, OR 97008 | Tel 855-896-3525 | Fax 866-409-9622 www.neologicsolutions.com | email: [email protected] STUART, FL | BEAVERTON, OR | GREENVILLE, SC | SAN DIEGO, CA £ Made in USA with heavy-duty 304L or 316L stainless steel construction £ V-band clamp or swing bolt closures £ Universal seal cups/compression plates accept DOE and 222/Flat or Fin cart- ridges–standard on all filter housings £ 1/4” gauge port on inlet/outlet – standard on all filter housings £ Optional 3M™ Scotchkote™ 134 Fusion Bonded Epoxy Coating for SEA WATER Bag Housings Sanitary Filter Housings Single Filter Housings Specialty Filter Housings £ Optional 3M™ Scotchkote™ 134 Fusion Bonded Epoxy Coating for SEA WATER applications £ Horizontal filter housings option on some models £ ASME Certification available on housings £ Custom sizes, materials, labeling and packaging available upon request £ Made in USA with heavy-duty 304L or 316L stainless steel construction £ Optional ring nut closure and bolt and nut closure available £ Cartridge options include double open end (DOE), internal o-ring 213, and 222 or 226 with fin or flat ends £ Housings accept 4-1/2”, 2-3/4” and 2-1/2” diameter cartridges in 10”, 20” and up to 30” in length £ Made in China with 316L stainless steel, electropolished with standard 25RA internal finish and 32RA external finish £ T-style housing design £ Available in 1 through 21 round cartridges £ Tri-clamp closure for single cartridge housing £ Swing bolt closures £ Available with 226 or 222-style cartridge connectors £ Made in USA with heavy-duty 304L or 316L stainless steel construction £ V-band clamp or swing bolt closures £ Stainless steel compression spring for positive bag sealing £ 1/4” FNPT gauge ports and 1/2” FNPT drain port £ Optional 3M™ Scotchkote™ 134 Fusion Bonded Epoxy Coating for SEA WATER applications CLICK ON LINKS Single Multi-Round 50-150 gpm 450-1200 gpm Single Multi-Round 70-150 gpm 350-1050 gpm 28-112 gpm 49-196 gpm 168-616 gpm 540-1040 gpm 4R & 5R 7R 12R & 22R 36R & 52R 1-192 gpm Bolt & Nut Closure Ring Nut Closure SOE-Style 222 & 226 Big Blue®-Style 4-1/2” Diameter 3M SFB SFN SFR SFC USA MADE Sea Water Coating Horizontal Housing Coated Scotchkote™ ASME Housings Available Inline, Single and Multi-Round
Transcript of Filter Housings Selection Guide - NeoLogic Solutions
Filtration DivisionS O L U T I O N S
© Copyright 2013 NeoLogic Solutions. All Rights Reserved. Manufacturer reserves the right to make changes without notice.
Jumbo Filter Housings Multi-Cartridge Filter Housings
Filter HousingsSelection Guide
£ Made in USA with heavy-duty 304L or 316L stainless steel construction£ V-band clamp or swing bolt closures£ SEVEN sizes available using 1, 3, 4, 5 or 8 cartridges, flow rates up to 1200 gpm£ Standard with pressure gauges and mounting legs£ Optional 3M™ Scotchkote™ 134 Fusion Bonded Epoxy Coating for SEA WATER applications
10012A020614
9450 SW Gemini Dr, ECM #83358, Beaverton, OR 97008 | Tel 855-896-3525 | Fax 866-409-9622 www.neologicsolutions.com | email: [email protected], FL | BEAVERTON, OR | GREENVILLE, SC | SAN DIEGO, CA
£ Made in USA with heavy-duty 304L or 316L stainless steel construction£ V-band clamp or swing bolt closures£ Universal seal cups/compression plates accept DOE and 222/Flat or Fin cart- ridges–standard on all filter housings£ 1/4” gauge port on inlet/outlet – standard on all filter housings£ Optional 3M™ Scotchkote™ 134 Fusion Bonded Epoxy Coating for SEA WATER
Bag Housings Sanitary Filter Housings
Single FilterHousings
Specialty Filter Housings£ Optional 3M™ Scotchkote™ 134 Fusion Bonded Epoxy Coating for SEA WATER applications£ Horizontal filter housings option on some models£ ASME Certification available on housings£ Custom sizes, materials, labeling and packaging available upon request
£ Made in USA with heavy-duty 304L or 316L stainless steel construction£ Optional ring nut closure and bolt and nut closure available£ Cartridge options include double open end (DOE), internal o-ring 213, and 222 or 226 with fin or flat ends£ Housings accept 4-1/2”, 2-3/4” and 2-1/2” diameter cartridges in 10”, 20” and up to 30” in length
£ Made in China with 316L stainless steel, electropolished with standard 25RA internal finish and 32RA external finish£ T-style housing design£ Available in 1 through 21 round cartridges£ Tri-clamp closure for single cartridge housing£ Swing bolt closures£ Available with 226 or 222-style cartridge connectors
£ Made in USA with heavy-duty 304L or 316L stainless steel construction£ V-band clamp or swing bolt closures£ Stainless steel compression spring for positive bag sealing£ 1/4” FNPT gauge ports and 1/2” FNPT drain port£ Optional 3M™ Scotchkote™ 134 Fusion Bonded Epoxy Coating for SEA WATER applications
CLICK ON LINKS
Single Multi-Round50-150 gpm 450-1200 gpm
Single Multi-Round70-150 gpm 350-1050 gpm
28-112 gpm 49-196 gpm 168-616 gpm 540-1040 gpm
4R & 5R 7R 12R & 22R 36R & 52R
1-192 gpm
Bolt & NutClosure
Ring NutClosure
SOE-Style222 & 226
Big Blue®-Style4-1/2” Diameter
3MSFBSFN SFR SFC
USA MADE
Sea Water Coating Horizontal Housing
CoatedScotchkote™
ASMEHousingsAvailable
Inline, Single and Multi-Round
