Fiery Color Profi ler SuiteFiery® Color Profi ler Suite is the market-leading solution for print color management. A comprehensive set of integrated tools for Fiery servers provide optimal color quality at every stage of the printing workfl ow. Using Color Profi ler Suite with Fiery Driven™ printers ensures color reproduction is always accurate, consistent and reliable. This complete color management solution lets users make, edit and inspect profi les; verify color accuracy; achieve and maintain industry standards; and control color process over time.

Printer

R Create CMYK or RGB output profi les R Create new calibration setting or use existing one R G7 calibration for Fiery Driven print systems R Match up to 5 Fiery Driven printers R Choose from 46 – 4028 patches R Bi-directional measurements R Re-measure strips of individual patches R Average multiple measurement sets R Auto population of expert profi le settings based on factory profi les R Black controls with dynamic GCR based on factory profi les R PDF workfl ow for conventional press or any digital print system R Automatically install profi le on Fiery Driven printers R Custom paper size support R Profi le for specifi c lighting conditions R Support for ICC v2 and ICC v4 profi les R Featuring multi-channel profi ling support for future

Fiery Driven High-Speed Inkjet Presses

Profi le Making

PROFILING & IMAGING SOLUTIONS

R Intuitive workfl ow allows even novices to create a profi le R Automatically create Fiery calibration set R Create output profi le linked to calibration set in 5 simple steps R Server preset for easy selection of linked calibration and profi le R Print test page to evaluate results upon completion

Express Profi le

R Match proofi ng and production output R Optimized device link profi le creation with iteration R Pick best iteration for device link creation R Direct update of device link on Fiery servers R Insert up to two intermediate profi les R User defi ned separation options R Black channel preservation R Optional black point compensation R Spot color optimization R Integrate device link profi les from Curve3 R G7 optimized device link iteration target

Device Link

Monitor

R Create profi les for any display R Easy and advanced mode R Gray balance optimization R User defi nable luminance settings R Profi le summary report

Profi le Inspection and Editing Color Process Control

Color Verifi er

R Intuitive workfl ow allows even novices to verify profi les R Measurement-based verifi cation tool to check

compliance with industry standards or references R Verify against ISO 12647-7 / 8 and G7 R Support for ISO 12647-7:2016 verifi cation R 2D and 3D visualization of color gamuts R ISO characterization sets supplied including,ISO 12647-2 / 7,

G7 validation, Fogra PSD, IDEAlliance 2013 R Support for industry-standard control strips including Ugra/Fogra Media

Wedge 2.2a and 3.0a, and IDEAlliance 2009 and 2013 control strips

R

PROFILING & IMAGING SOLUTIONS

R Recalibrate Fiery server with any supported spectrophotometerR Create new Fiery calibration setR Support for latest 51 patch calibration targetR Featuring calibration support for future Fiery

Driven High-Speed Inkjet Presses

Calibrator

System Requirements

Memory 3 GB of available RAMHard drive space 3 GB of available HDDUSB 1 USB 2.0 portMin. monitor resolution Windows®: 1024 x 768 Mac®: 1024 x 800 Verify module: 1280 x 1024OS support Windows 7, 8, 8.1, 10 (32-bit or 64-bit)

Mac OS v10.7 – v10.11

Hardware Support

• EFI ES-2000/ES-1000 spectrophotometers

• EFI ES-6000 scanning network spectrophotometer

• Konica Minolta FD-9 scanning spectrophotometer

• Konica Minolta FD-5BT spectrodensitometer

• Barbieri Spectro Swing, Spectro LFP, SpectroPad spectrophotometers

• i1 iSis and iSis XL scanning spectrophotometers

• i1iO automated scanning table

Licensing and Support

• Demo: Create, save, edit and inspect locked sample profi les, calibrate and recalibrate

• Automatic updates via the web

• Free elearning courses

• Includes one year of EFI technical support and software maintenance

Inspect R 2D and 3D gamut viewer R View CMYK and RGB profi les R View spot color profi les R Compare multiple profi les R Plot gamut as points or surface R Analyze color at specifi c L* values

Edit

R Edit CMYK and RGB profi les R Soft proof profi le edits R View reference before and after edit R Edit multiple rendering intents R Apply single or multiple edits R Edit in CMYK, RGB, XYZ or L*a*b* R Sample point selection R Measure source color for comparison R Global and selective color controls R Hue, lightness, contrast, saturation editing R Node editing

Support and System Requirements

45140923 July, 2016Nothing herein should be construed as a warranty in addition to the express warranty statement provided with EFI products and services.