Fiberglass Piping System

ALSCO Industrial Products, Inc. 1265 Mount Vernon Rd. Lithia Springs, GA. 30122 FAX 770-739-75497 7 0 - 9 4 1 - 3 0 3 0 1 - 8 0 0 - 8 4 9 - 3 0 3 0

ALSCOTM Fiberglass Piping System

3

Bondstrand Product SeriesSeries 2000

Quick-Lock adhesive jointMolded and filament-wound

fittings and flanges250F/150 psi system rating1- through 16-inch diameters20 mil reinforced resin-rich liner2- through 6-inch does not require

shaving

ApplicationsJet FuelFoodstuffsMild corrosives Brine and waste waterChemical process linesHot water and steam condensate

ASTM-RTRP 11FEUSFDA 21 CFR 175.105/177.2280ASTM D5677Amerons standard adhesive-bonded piping for chemical processapplications to 250FAromatic amine-cured epoxyconstruction

Series 4000Quick-Lock adhesive jointFilament-wound fittings and flanges250F/150 psi system rating1- through 16-inch diameters

50 mil reinforced resin-rich epoxy liner2- through 6-inch does not require

shaving

ApplicationsAlkaliesIndustrial wasteModerate corrosivesNonoxidizing acidsSolvents and slurriesGeneral industrial service

ASTM-RTRP 11FEExtra thick 50-mil liner for corrosiveand erosive mediaEmploys aromatic amine-cured epoxyresins

ASTM-RTRP 11FELarge-diameter, high pressure,mechanically-joined line pipe for oilfield service and fire protectionsystems; employs amine-cured epoxy resins

Series 2000MPQuick-Lock adhesive jointFilament-wound fittings and flanges250F/150 psi system rating2- through 10-inch diameters20 mil reinforced resin-rich liner

ApplicationsHot waterChilled waterDistrict heatingSteam condensate

ASTM D5686Amerons standard adhesive-bondedmil-spec piping for steam condensateand hot waterAromatic amine-cured epoxyconstruction

Series 2400/3400Key-Lock mechanical joint200F/150-950 psi system rating2- through 40-inch diameters20 mil reinforced resin-rich liner

available

ApplicationsDrainageFire protectionOil field reinjection linesSaltwater and seawaterGeneral industrial serviceWaste water and sewage

ASTM-RTRP 11AX/FXASTM D5677Amerons standard adhesive-bondedor mechanically-joined piping for mod-erate temperatures; employs aromatic amine-cured epoxy resins

Series 3000APronto-Lock mechanical jointTaper/taper adhesive joint210F/150-450 psi system rating2- through 16-inch diametersReinforced resin-rich liner in

8- through 16-inch diameters

ApplicationsCooling waterPotable waterBoiler feedwaterElectroplating solutionsSteel piping replacementWater mains and water treatment

ASTM-RTRP 11AE/FENFPA #24For underground fire protectionsystems requiring UL or FM-listedEmploys aromatic amine-cured epoxy resins

Series 3200APronto-Lock mechanical jointTaper/taper adhesive joint210F/200 psi system rating2- through 16-inch diametersResin-rich liner reinforced

in 8- through 16-inch diameters

ApplicationsFire mains, Municipal wasteClass 200 service (2-12 inch)Class 175 service (14-16 inch)Solutions pH 1-12Steel piping replacement Brine and brackish water

ASTM-RTRP 11FEGeneral 300 psi industrial serviceEmploys aromatic amine-cured epoxyresins

Series 3300APronto-Lock mechanical jointTaper/taper adhesive joint210F/300 psi system rating8- through 12-inch diameters20 mil reinforced resin-rich liner

ApplicationsClass 300 service Solutions pH 1-12Steel piping replacementGeneral industrial serviceSaltwater and brackish water


ALSCOTM Fiberglass Piping System

3

Bondstrand Product SeriesSeries 5000/5100

Quick-Lock adhesive jointFilament-wound flanges200F/250F & 150 psi system rating1- through 16-inch diameters50 mil nexus and C-veil reinforcedresin-rich liner (to 100 mil for 5100)2- through 6-inch does not require

shaving

ApplicationsDrainsOxidizing acidsStrong corrosives Sewer and waste waterChemical process linesBleach and chlorine solutions

ASTM-RTRP 11EDUSFDA Vinyl ester construction for severelycorrosive services; high performanceNovalac-based vinyl ester resins and100 mil liner on special order

Bondstrand PSXTM L3/PSX JF Piping

Quick-Lock adhesive jointFilament-wound fittings and flanges250F / 225 psi system rating1- through 16-inch diametersPSXJF Piping constructed withintegral fire protection jacket

ApplicationsOffshore and above ground fire

protectionCooling waterBrine and seawater Industrial piping at risk to fire exposure

ASTM- F1173IMO Level 3 UKOOA jet fire rating for PSXJF pipePSXJF jacket includes sacrificial thermoplastic tape layers for fire and

heat protection Employs proprietary polysiloxanephenolic resin

Bondstrand LDGasketed stab jointButt and wrap jointup to 250F / 150 psi system rating18- through 108-inch diametersChoice of four different resin systems

ApplicationsAcid drainsPlant effluentsBrine and seawater Cooling tower waterChemical waste streams

ASTM D 2996Cycloaliphatic-amine cured epoxy

(EPX)High-temperature vinyl ester (HVE)Standard vinyl ester (SVE) or Isophthalic acid polyester (IAP) resins

Secondary Containment Systems

Bondstrand IIEpoxy or vinyl ester construction250F / 150 psi primary ratingQuick-Lock adhesive primary ratingTaper / taper joint optionPrimary sizes: 2 through 12-inchSecondary sizes: 3 through 16-inch

Bondstrand CXAvailable with most Industrial

Product SeriesLow profile, integral coaxial jacket

on pipe & fittingsMechanical closure 2-4 diametersBonded closure 6 and larger sizes

ApplicationsJet FuelGasolinesDiesel fuelHazardous wasteChemical processingHeavy-metal effluentsGroundwater remediationEnvironmentally sensitive

installations

CERCLA40 CFR 264/540 CFR 280 RCRAThree secondary joining optionssimplify system design to match-project needs:

CL: two-piece clam-shell closureand fittings

QL: bell x spigot adhesive joint

Series 7000Quick-Lock adhesive jointFilament-wound flanges210F / 150 psi system rating1- through 16-inch diametersStandard piping constructed without liner for enhanced staticcontrol

ApplicationsJet fuelGasolinesDiesel fuelShipboard serviceRefined hydrocarbonsPrimary lines in contained systems

ASTM-D5677Meets pending ASTM requirements for

conductive pipingIncludes conductive filament reinforce-ment to dissipate static charges in refined fuel lines; employs aromatic amine-cured epoxy resins


ALSCOTM Fiberglass Pipe and Fittings

BONDSTRAND Series 2000Features: Quick-Lock adhesive joint Molded and filament-wound fittings and flanges 250F / 150 psi system rating 1 - 16-inch diameters 20 mil reinforced resin-rich liner 2 - 6 inch does not require shavingApplications: Jet Fuel Foodstuffs Mild Corrosives Brine and waste water Chemical process lines Hot water and steam condensate

BONDSTRAND Series 4000Features: Quick-Lock adhesive joint Filament-wound fittings and flanges 250F / 150 psi system rating 1 - 16-inch diameters 50 mil reinforced resin-rich epoxy liner 2 - 6 inch does not require shavingApplications: Alkalies Industrial Waste Moderate corrosives Nonoxidizing acids Solvents and slurries General industrial service

Series 2000 and 2000NS* Epoxy 20 Mil Liner Pipe Part # 6440-

* No shave pipe 2 - 6 inch available in EL 40 8 inch available in EL 20EL = Exact Lengths RL = Random Lengths (19 6 +/- 1/4)

3

Nominal Size Price Nominal Nominal Pipe NominalPipe Size Code Per Foot I.D. Wall Thick. Lengths Weight(inches) (inches) (inches) (feet) (lbs./ft.)

1 010 $ 8.50 1.07 .140 10 EL .41 1/2 015 9.25 1.67 .140 10 EL .72 * 020 5.75 2.10 .123 20 EL .73 * 030 7.90 3.21 .126 20 EL 1.14 * 040 10.45 4.14 .151 20 EL 1.76 * 060 16.00 6.19 .181 20 EL 2.68 080 22.00 8.22 .226 20 RL 4.310 100 38.00 10.35 .226 20 RL 5.412 120 48.00 12.35 .226 20 RL 6.414 140 54.00 13.56 .250 20 RL 7.416 160 63.00 15.50 .269 20 RL 9.5

Series 4000 and 4000NS* Epoxy 50 Mil Liner Pipe Part # 6441-

* No shave pipe 2 - 6 inch available in EL 40 8 inch available in EL 20EL = Exact Lengths RL = Random Lengths

Nominal Size Price Nominal Nominal Pipe NominalPipe Size Code Per Foot I.D. Wall Thick. Lengths Weight(inches) (inches) (inches) (feet) (lbs./ft.)

1 010 $ 11.00 1.07 .140 10 EL 0.41 1/2 015 15.00 1.67 .140 10 EL 0.72 * 020 6.70 2.10 .123 20 EL 0.73 * 030 8.85 3.21 .126 20 EL 1.04 * 040 11.10 4.14 .151 20 EL 1.66 * 060 18.40 6.19 .181 20 EL 2.58 080 31.00 8.22 .229 20 RL 4.110 100 49.75 10.35 .229 20 RL 5.112 120 53.50 12.35 .229 20 RL 6.114 140 61.75 13.56 .250 20 RL 7.416 160 69.80 15.50 .286 20 RL 9.6

Ameron International, a worldwide supplier of corrosion-resistant fiberglass piping systems, provides comprehensivesolutions for a broad spectrum of applications. Withstands higher temperatures and pressures than thermoplastics Well-suited for general industrial and chemical processing applications Provides environmental protection benefits, such as dual containment Corrosion and chemical resistance Available - Series 3000 as an unlined epoxy



BONDSTRAND Series 2000 / 4000 Fittings

3

90 ElbowsFilament Wound QL

Part # 6442-Size-Inch Size Code Price

1 010 $ 49.301 1/2 015 60.30

2 020 65.003 030 75.004 040 102.006 060 149.008 080 275.0010 100 345.0012 120 495.0014* 140 605.0016* 160 850.00

90 ElbowsANSI SR F/W*

w/ Filament Wound FlgsPart # 6444-

Size-Inch Size Code Price2 020 $ 231.003 030 261.004 040 304.006 060 400.008 080 513.00

10 100 760.0012 120 951.00

45 ElbowsANSI F/W*


Size-Inch Size Code Price2 020 $ 224.003 030 270.004 040 299.006 060 461.008 080 525.0010 100 790.0012 120 985.00

45 ElbowsANSI SR Molded*

w/ Molded Van Stn FlgsPart # 6451-

Size-Inch Size Code Price2 020 $ 141.003 030 181.004 040 220.006 060 330.00

AdaptorQL F x NPT Male*


1 010 $ 29.001 1/2 015 43.50

2 020 44.003 030 51.204 040 56.006 060 85.50

End CapMolded*


2 020 $ 69.103 030 71.754 040 92.956 060 130.008 080 161.00

10 100 185.0012 120 256.00

90 ElbowsANSI SR F/W*

w/ Molded FlangesPart # 6445-





45 ElbowsANSI F/W*



10 100 774.0012 120 966.00

90 ElbowsMolded QLPart # 6443-




1 010 $ 36.751 1/2 015 42.00

2 020 50.403 030 71.404 040 98.006 060 149.008 080 275.00

10 100 345.0012 120 495.0014* 140 605.0016* 160 765.00



* are non-stocked fittings.




3

FlangeQL - Filament Wound

CL 150 DrillingPart # 6457-

Size-Inch Size Code Price2 020 $ 41.503 030 54.004 040 60.206 060 79.008 080 118.0010 100 166.0012 120 205.0014* 140 222.0016* 160 310.00

FlangeQL Molded

CL 150 DrillingPart # 6458-


TeeANSI*

w/ Molded FlangesCL 150 Part # 6456-


End PlugMolded*


2 020 $ 29.203 030 30.304 040 31.806 060 47.408 080 78.5510 100 143.0012 120 151.00

FlangeQL Heavy DutyCL 150 Drilling


1 010 $ 53.251 1/2 015 68.60

CouplingQL F


1 010 $ 15.251 1/2 015 19.95

2 020 24.653 030 25.904 040 30.356 060 40.008 080 64.0010 100 88.0012 120 120.0014* 140 147.0016* 160 158.00

CouplingNo Shave


2 020 $ 9.603 030 10.354 040 16.356 060 19.70

TeeQL Filament-Wound


1 010 $ 112.001 1/2 015 124.00

2 020 155.003 030 188.004 040 225.006 060 345.008 080 446.0010 100 578.0012 120 839.0014* 140 1200.0016* 160 1400.00

TeeANSI F/W*

w/ F/W Flanges CL 150Part # 6454-


10 100 1150.0012 120 1367.0014* 140 2095.0016* 160 2678.00

TeeQL MoldedPart # 6453-


TeeANSI Molded*

w/ Molded Van Stn FlgsCL 150 Part # 6455-


* Items marked with an * are non-stocked fittings.




3

LateralQL - Filament Wound


2 020 $ 156.003 030 177.004 040 245.006 060 340.008 080 535.0010 100 820.0012 120 1100.0014* 140 1775.0016* 160 3525.00

BushingConcentric Reducer* Molded


2 x 1 101 $ 17.002 x 1 1/2 102 17.00

3 x 2 103 23.504 x 2 104 24.004 x 3 105 24.006 x 2 106 38.006 x 3 107 38.006 x 4 108 38.008 x 2 109 65.00

Size-Inch Size Code Price8 x 3 110 $ 65.008 x 4 111 65.008 x 6 112 65.0010 x 2 113 120.0010 x 3 114 120.0010 x 4 115 120.0010 x 6 116 120.0010 x 8 117 120.0012 x 2 118 135.00

Size-Inch Size Code Price12 x 3 119 $ 135.0012 x 4 120 135.0012 x 6 121 135.0012 x 8 122 135.00

12 x 10 123 135.00

BushingEccentric Reducer* Molded


3 x 2 103 $ 17.004 x 2 104 24.004 x 3 105 24.006 x 2 106 38.006 x 3 107 38.006 x 4 108 38.00

Size-Inch Size Code Price8 x 2 109 $ 68.008 x 3 110 68.008 x 4 111 68.008 x 6 112 68.0010 x 2 113 125.0010 x 3 114 125.00

Size-Inch Size Code Price10 x 4 115 $ 125.0010 x 6 116 125.0010 x 8 117 125.0012 x 6 121 135.0012 x 8 122 135.00

12 x 10 123 135.00

Tapered Body ReducerConcentric Reducer QL Filament-Wound

Part # 6468-Size-Inch Size Code Price1.5 x 1* 100 $ 30.95

2 x 1 101 38.002 x 1 1/2 102 38.00

3 x 2 103 55.404 x 2 104 76.004 x 3 105 76.00


Size-Inch Size Code Price12 x 8 122 $ 245.00

12 x 10 123 245.0014 x 10* 124 572.0014 x 12 125 572.0016 x 12* 126 963.0016 x 14* 127 963.00


CrossFilament-Wound QL*

Part # 6463-





3


** Note: Other sizes and configurations available.

Tapered Body ReducerConcentric Reducer ANSI* w/ Filament-Wound Flanges


3 x 2 103 $ 263.004 x 2 104 290.004 x 3 105 297.006 x 3 107 326.006 x 4 108 365.008 x 4 111 428.00


Size-Inch Size Code Price14 x 12 125 $ 938.0016 x 12 126 1335.0016 x 14 127 1372.00

Saddles **QL Outlet*


3 x 2 103 $ 83.504 x 2 104 128.004 x 3 105 133.006 x 2 106 128.006 x 3 107 153.006 x 4 108 191.00



Saddles **Flange Outlet*


3 x 2 103 $ 127.004 x 2 104 136.004 x 3 105 159.006 x 2 106 171.006 x 3 107 195.006 x 4 108 198.00





BONDSTRAND Series 5000Features: Applications: Quick-Lock adhesive joint Highly corrosive chemicals Molded and filament-wound fittings Oxidizing chemicals and acids Operating Temperatures to 200F Acid drains Bleach processing Chlorine Working Pressures to 150 psig Chlorinated water Chemical process piping 2 - 16-inch diameters Corrosive slurries Food processing plant 50 Mil reinforced VE resin rich liner Organic chemicals Phosphoric acid

Series 5000 and 5000NS* Vinylester Pipe Part # 6472-

* No shave pipe 2 - 6 inch available in EL 40 8 inch available in EL 20EL = Exact Lengths RL = Random Lengths (19 6 +/- 1/4)

3Nominal Size Price Nominal Nominal Pipe NominalPipe Size Code Per Foot I.D. Wall Thick. Lengths Weight(inches) (inches) (inches) (feet) (lbs./ft.)

1 010 $ 24.40 - - 10 EL -1 1/2 015 24.60 - - 10 EL -2 * 020 7.55 2.10 .157 20 EL 1.03 * 030 10.40 3.22 .157 20 EL 1.54 * 040 16.10 4.14 .203 20 EL 2.46 * 060 27.00 6.20 .203 20 EL 3.58 080 29.30 8.22 .226 20 RL 5.010 100 42.40 10.35 .226 20 RL 6.212 120 63.40 12.35 .226 20 RL 7.414 140 67.05 13.56 .250 20 RL 8.716 160 71.90 15.50 .286 20 RL 11.2



1 010 $ 49.301 1/2 015 60.30

2 020 105.003 030 135.004 040 163.006 060 253.008 080 355.0010 100 484.0012 120 604.00

14** 140 683.0016** 160 873.00

90 ElbowsANSI SR F/W**



10 100 1002.0012 120 1510.00

90 ElbowsANSI SR F/W**



90 ElbowsANSI SR Molded**







1 010 $ 36.751 1/2 015 59.45

2 020 93.503 030 119.004 040 144.006 060 212.008 080 300.00

10 100 399.0012 120 557.00

14** 140 683.0016** 160 788.00

** are non-stocked fittings.



BONDSTRAND Series 5000 Fittings

3

45 ElbowsANSI F/W*






AdaptorQL F x NPT Male*


1 010 $ 32.201 1/2 015 47.15

2 020 35.203 030 44.704 040 48.956 060 76.20

End CapMolded*


2 020 $ 63.803 030 67.754 040 90.006 060 130.008 080 161.00

10 100 186.0012 120 244.00

45 ElbowsANSI F/W*



10 100 707.0012 120 997.00





FlangeANSI CL150

Hubbed Filament WoundPart # 6488-

Size-Inch Size Code Price2 020 $ 45.803 030 60.004 040 66.856 060 87.808 080 131.0010 100 172.0012 120 221.0014* 140 288.0016* 160 322.00

FlangeANSI CL150

Hubbed MoldedPart # 6489-


End PlugMolded*


2 020 $ 29.203 030 30.304 040 31.806 060 47.408 080 78.2010 100 112.0012 120 151.00

CouplingQL F


1 010 $ 17.851 1/2 015 19.50

2 020 22.003 030 25.004 040 32.006 060 40.108 080 62.0010 100 90.0012 120 115.0014* 140 135.0016* 160 155.00

CouplingNo Shave


2 020 $ 14.303 030 16.254 040 20.806 060 26.10

CrossFilament-Wound QL*

Part # 6463-


10 100 951.0012 120 1211.00




3


TeeANSI FW*

w/ Molded FlangePart # 6487-


TeeQL Filament-Wound


1 010 $ 97.101 1/2 015 109.00

2 020 227.003 030 267.004 040 329.006 060 471.008 080 631.0010 100 781.0012 120 917.0014* 140 1495.0016* 160 2128.00

TeeANSI F/W*

w/ F/W Flanges Part # 6485-


10 100 1479.0012 120 2077.00

TeeQL MoldedPart # 6484-


TeeANSI Molded*



LateralQL - Filament Wound


2 020 $ 234.003 030 286.004 040 384.006 060 416.008 080 614.0010 100 700.0012 120 1331.0014* 140 1809.0016* 160 2617.00

BushingConcentric Reducer* Molded


2 x 1 101 $ 15.502 x 1 1/2 102 15.50

3 x 2 103 17.004 x 2 104 24.004 x 3 105 24.006 x 2 106 45.006 x 3 107 45.006 x 4 108 45.008 x 2 109 68.00

Size-Inch Size Code Price8 x 3 110 $ 68.008 x 4 111 68.008 x 6 112 68.0010 x 2 113 125.0010 x 3 114 125.0010 x 4 115 125.0010 x 6 116 125.0010 x 8 117 125.0012 x 2 118 135.00

Size-Inch Size Code Price12 x 3 119 $ 135.0012 x 4 120 135.0012 x 6 121 135.0012 x 8 122 135.00

12 x 10 123 135.00

BushingEccentric Reducer* Molded


3 x 2 103 $ 31.504 x 2 104 44.004 x 3 105 44.006 x 2 106 77.456 x 3 107 77.456 x 4 108 77.45


Size-Inch Size Code Price10 x 4 115 $ 150.0010 x 6 116 150.0010 x 8 117 150.0012 x 6 121 192.0012 x 8 122 192.00

12 x 10 123 192.00




3

Tapered Body ReducerConcentric Reducer QL Filament-Wound

Part # 6502-Size-Inch Size Code Price1.5 x 1* 100 $ 42.20

2 x 1 101 46.652 x 1 1/2 102 46.65

3 x 2 103 82.204 x 2 104 92.454 x 3 105 92.45


Size-Inch Size Code Price12 x 8 122 $ 305.00

12 x 10 123 305.0014 x 10* 124 622.0014 x 12 125 622.0016 x 12* 126 710.0016 x 14* 127 710.00

Tapered Body ReducerConcentric Reducer* ANSI w/ Filament-Wound Flanges

Part # 6503-


Size-Inch Size Code Price8 x 6 112 $ 400.0010 x 6 116 451.0010 x 8 117 496.0012 x 8 122 565.0012 x 10 123 598.0014 x 10 124 -

Size-Inch Size Code Price14 x 12 125 -16 x 12 126 -16 x 14 127 -

Saddles **QL Bonded Outlet*


3 x 2 103 $ 138.004 x 2 104 149.004 x 3 105 153.006 x 2 106 173.006 x 3 107 192.006 x 4 108 213.00



Saddles **F/W Flange Outlet*


3 x 2 103 $ 143.004 x 2 104 164.004 x 3 105 178.006 x 2 106 199.006 x 3 107 213.006 x 4 108 256.00



Tapered Body ReducerConcentric Reducer* ANSI w/ Molded Flanges

Part # 6504-


Size-Inch Size Code Price8 x 6 112 $ 362.0010 x 6 116 394.0010 x 8 117 422.0012 x 8 122 602.0012 x 10 123 643.0014 x 10 124 -

Size-Inch Size Code Price14 x 12 125 -16 x 12 126 -16 x 14 127 -





ALSCOTM Fiberglass Adhesives

Determining Adhesive Requirements3For single wall pipe and fittings, the ratio is usually one adhesive bond to one bell end, whether it is on a fitting or apipe joint. For example, a 90 degree elbow would require 2 bonds as the fitting is bell x bell. Putting two joints of bell-end pipe together is one bond.

Count the bonds PER DIAMETER by counting the number of bell ends by size. Once the bonds have been counted,convert the TOTAL bonds per diameter to quantity of adhesives by dividing the bond amount by the number of bondsper kit for that particular diameter. For example, 20 bonds for 2 pipe and fittings in Series 5000 would require (5) 3-ozRP105B adhesive kits.

Please note that many conditions will affect the quantity of adhesives required for any particular job, such as humidity, temperature, and crew experience. It is best to factor in 5-10% extra adhesives when determining quantities on larger installations.

Pipe Size 1 1 1/2 2 3 4 6 8 10 12 14 16Kit Size Bonds-Per-Kit

3 oz. 10 6 4 3 2 1 1/2 1/2 1/2 - -5 oz. - 10 7 5 3 1 1 1 1 1/2 1/28 oz. - - 10 8 6 3 2 2 1 1 1

Bonds-Per-Kit for PSX-34, Series 2000/2000NS/4000/4000NS

Pipe Size 1 1 1/2 2 3 4 6 8 10 12 14 16Kit Size Bonds-Per-Kit

3 oz. - - 4 3 2 1 - - - - -6 oz. - - - - - - 1 1 1/2 1/2 1/2

Bonds-Per-Kit for RP105B, RP6B, and RP60B Adhesives

Bondstrand Adhesive KitsSeries 2000/2000NS/4000/4000NS

Kit Part # PricePSX-34 3 Oz. Single PSX-34-3 $ 13.00PSX-34 5 Oz. Single PSX-34-5 15.00PSX-34 8 Oz. Single PSX-34-8 18.00PSX-34 3 Oz. 6-Pack PSX-34-3-6P 63.00PSX-34 5 Oz. 6-Pack PSX-34-5-6P 75.00PSX-34 8 Oz. 6-Pack PSX-34-8-6P 90.00

Series 5000Kit Part # Price

RP105B 3 Oz. RP105B-3 $ 12.75RP105B 6 Oz. RP105B-6 17.00

Series 2000/2000NS/4000/4000NS Food GradeKit Part # Price

RP6B 3 Oz. RP6B-3 $ 12.75RP6B 6 Oz. RP6B-6 17.00


ALSCOTM Fiberglass Tools

3

Bondstrand Tools & AccessoriesMaintenance CouplingsSeries 2000/4000/5000


2 020 50.253 030 63.404 040 80.806 060 130.008 080 170.00

10 100 204.0012 120 236.0014 140 332.0016 160 346.00

Pi-Tapes(Coated Steel Only)

All Series Size-Inch Part # Price

2 - 12 6526 $ 246.002 - 24 6527 246.0012 - 36 6528 240.00

Flapper Wheels and SandersAll Series

Size-Inch Part # Price1 - 4 6522 $ 13.00

Mandrel 6523 1.806 - 16 6524 17.30

Mandrel 6525 11.80

M-80 Pipe Shaver ArborsSeries 2000/4000/5000/7000


10 100 $ 565.0012 120 710.0014 140 860.0016 160 1,013.00

Spanner WrenchesSeries 3000A/3200A/3200L


8 080 $ 110.0010 100 122.0012 120 130.0014 140 144.0016 160 156.00

Taper Tool llSeries 3000A/3200/3200L

Size-Inch Part # Price8 - 16 6531 $ 6,235.00

M-80 Pipe ShaverSeries 2000/4000/5000/7000


Universal Jacket CutterFor 2 - 6 CX Pipe


Replacement Grinder Wheel forUniversal Jacket Cutter

Item Part # PriceWheel 6576 $ 70.00

Replacement Motor forUniversal Jacket Cutter

Item Part # PriceMotor 6577 $ 80.00

Ratchet Puller and ClampsAll Series

16 Come-along ratchet puller 1/2 ton with hooks and clamps (order in units of 2)

Band Clamp for ratchet puller (order in units of 2)

One complete set requires 2 pullers and 2 band clamps

Item Part # PriceRatchet Puller 6529 $ 55.00Band Clamp 6530 136.00

Unique Taper ToolSeries 3000A/3200A/3200L

Item Part # PriceUnique Tool with 6532 $1,666.00one (1) 2 ColletStandard Collet 6533 608.00

3 - 6

M-80 Pilot Power DriveSeries 2000/4000/5000/7000


Heater BlanketsAll Series

Size-Inch / Volt Part # Price2 - 4 / 120 Volt 6506 $ 82.006 - 8 / 120 Volt 6507 124.00

10 - 12 / 120 Volt 6508 167.0014 - 16 / 120 Volt 6509 240.0018 - 20 / 120 Volt 6510 344.00Size-Inch / Volt Part # Price2 - 4 / 220 Volt 6511 $ 82.006 - 8 / 220 Volt 6512 124.00

10 - 12 / 220 Volt 6513 167.0014 - 16 / 220 Volt 6514 240.0018 - 20 / 220 Volt 6515 344.00

B-1 Pipe ShaversSeries 2000/4000/5000/7000


1 010 $ 500.001 1/2 015 573.00

2 020 667.003 030 692.004 040 710.006 060 966.008 080 983.00

Item Part # PriceCutter Wheel 6517 $ 10.35Wheel Screw 6518 20.25

For use with Pronto-Lock pipe only.

Available for rental

Available for rental

Fiberglass Piping System

Documents

Transcript of Fiberglass Piping System