Fiber Laser Marking and Engraving System ... Fiber Laser Marking and Engraving System Zero...

Click here to load reader

  • date post

    05-Aug-2020
  • Category

    Documents

  • view

    7
  • download

    0

Embed Size (px)

Transcript of Fiber Laser Marking and Engraving System ... Fiber Laser Marking and Engraving System Zero...

  • Production part loading is through the sliding, interlocked laser

    safe door/ viewport.The entire “ hood” opens and closes

    effortlessly for complete interior access. All interior access

    doors are interlocked for safely and compliance with

    CDRH Class I certification requirements.

    It is a complete, ready to use tabletop fiber laser marking system

    in a Class I enclosure. Using Scanlab optical components,

    an IPG fiber laser and ALI’s Prolase XP/7 Laser Marking software,

    the Desktop Langolier provides the ultimate in quality, reliability

    and functionality. Designed for small part and nameplate applications,

    the Desktop Langolier is equally comfortable in both

    industrial and office environments. Requiring only

    a single 110VAC household connection the system is

    ready to perform “out of the box”.

    Preliminary information. Actual product specification and information is subject to change without further notice.

    Fiber Laser Marking and Engraving System

    Zero Maintenance Desktop laser system

    Very low power consumption

    Turn-key system with out of the box operation

    Easy to use laser control software

    Flexible, easy access, work area for various part sizes

    and work holding fixtures

    Fiber laser reliability and part marking capability

    Intergrated alignment laser for easy mark set up

    Permanently marks virtually any material

    The Desktop Langolier is the result of 20+ years of building lasers for part marking.

  • www.jimani-inc.com [email protected] Telephone: (805) 486-1399 Fax: (805) 483-5127

    Parameter Value Laser Mode and Technology Emission Wavelength Nominal Average Power Output Operating Voltage Maximum Power Consumption Writing Speed Marking Field Size ( inches )

    Enclosure ( inches ) Scan Head Aperture

    Pulsed Fiber Laser 1060 - 1070 nm

    20W / 30W / 50W 110V AC

    230W / 280W / 350W 640 CPS single stroke 1mm characters

    4.7 x 4.7 up to 7.2 x 7.2 10mm

    47.32 x 25.98

    Preliminary information. Actual product specification and information is subject to change without further notice.

    1730 Fiske Place, OXNARD, California 93033 U S A

    All Metals, Many plastics and Non-Metals

    Bar Code, 2D Matrix

    True Type Font Support

    Radial Text, Serialization

    EPS, PLT, DXF and Most Vector Files Prolase XP/7 Laser marking Software

    Fiber Laser Marking and Engraving System

    CDRH Class I Maintence Free 110 VAC Operation