Fiber Connections - Platt Electric Supply...splice, no gel and no adhesive. The 3M Fibrlok Optical...

PerformanceFiber Connections

High

3M™ Fiber Interconnect Solutions

The Network of Networks

A complete family of high-performance products.3M meets the increasing demand for

speed and reliability with a wide variety

of innovative solutions. Choose from a

broad range of ferruled fiber connectors

and adapters, mechanical splices, cable

assemblies and accessories designed

for the interconnection of fiber optic

networks. 3M provides a full line of

singlemode and multimode LC, SC,

ST and FC connectors. 3M™ Hot Melt

Connectors, 3M™ Crimplok™ Connectors

and 3M™ No Polish Connectors are

very popular among contractors and

installers because of their reliability and

ease of use. And the 3M™ Crimplok™+

line is the first-known, commercially

The future is fiber. And 3M fiber interconnect solutions are leading the way.

available, field-mounted connector for

FTTX indoor and outdoor use with no

splice, no gel and no adhesive. The 3M™

Fibrlok™ Optical Splice is one of the

leading mechanical splices and is now

specified in fiber-to-the-home projects

as a substitute for fusion splicing.

Develop a high-performance network

with 3M fiber interconnect solutions.

Connect with 3M experience.With more than 70 years of adhesive

expertise, 40 years of ceramic

technology leadership, 30 years of

fiber optic experience, and 100 years

of cumulative telecom experience,

3M provides an ideal offering of

convenient, reliable and easy-to-install

connectors for fiber networks.

A full line of products from a full-service company. 3M is an innovation company. Our

products, systems and services are

optimized for constructing and

rehabilitating networks for faster,

more reliable performance. That means

delivering products that conform to

industry standards and that are as

reliable as they are intermateable.

3M maintains a strong reputation for

service by collaborating with other

industry leaders to develop meaningful

goals and standards. We strive to exceed

those standards in everything we do.

Selecting the Right Connector or SpliceThe first step in the selection process is to determine whether

a field installable connector or a mechanical splice will best

meet your needs.

Pros Cons

Splice

Mechanical Fast installation Low tooling costEasy to use

Higher part costSlightly higher lossNo field testing

Fusion Low insertion loss and reflection Low material cost

High equipment cost Requires powerHigher skill level required

Connector

Factory-terminated No tooling required Very easy to install Plug-n-play

Higher costCable management issue Replacement of damaged connectors

Field-terminated Custom cable installationLow inventory costs Easy to install Lower material costs

Slightly higher loss Tooling required Some skill required

3M offers a complete line of fiber connectors

with ceramic ferrules. Our 3M™ Hot Melt

Connectors, 3M™ Crimplok™ Connectors,

3M™ Crimplok™+ Connectors and 3M™ No

Polish Connectors (NPCs) are popular among

contractors because of their reliability and ease

of use. 3M field installable connectors maximize

termination yield through ease of mounting and

high performance installation tools. 3M field

installable connectors are available in SC, LC,

ST and FC product families. 3M also provides

field installable FC/APC, SC/APC and LC/APC

angle polish connectors.3M™ Fiber Connector Family

3M™ Field Installable Connectors

3M Connector

Installation Method

Performance* Application Recommended connectors installed per location†

Tools Required

Tool Price

Connector Price

Training Required

Crimplok+ Crimp and field polish

Outdoor wide temperature range

Service provider/ enterprise cabling

Less than 10 Quality cleaver/ Nano finisher/ Install tool provided

$$$ $$$ $

No Polish Mechanical splice with gel/ no field polish


Service provider/ enterprise cabling

Less than 10 Quality cleaver/ Install tool provided

$$$ $$$ $

Hot Melt Pre-loaded adhesive/ field polish

Controlled environment

Enterprise cabling Greater than 10 Electric oven/ Polish tools

$$$ $$ $$

Crimplok Crimp and field polish


Enterprise cabling Less than 10 Scribe and actuator/ Polish tools

$$ $$ $$

Epoxy(2-part)

Field inject adhesive/ field polish


Cable assembly house

Greater than 100 Adhesive syringe/ Polish tools

$$ $ $$$

Epoxy (Anaerobic)

Field inject adhesive/ field polish


Enterprise cabling Greater than 10 Adhesive syringe/ Polish tools

$$ $ $$$

* Outdoor wide temperature range meets Telcordia standards of -40°C to 75°C (-40°F to 167°F). Controlled environment meets TIA 568B.3 requirements for structured cabling.† 3M™ No Polish Connectors , 3M™ Crimplok™+ Connectors, and 3M™ Crimplok™ Connectors use mechanical technology that is quick to set up to install a few connectors. 3M™ Hot Melt Connectors and 3M™ Epoxy Connectors installation processes are optimal for a larger number of connectors installed at one location.

Fiber Connector Selection Charts3M Connector LC SC ST FC

250/900 µm Jacketed 250/900 µm Jacketed 250/900 µm Jacketed 250/900 µm Jacketed

Crimplok+ ü

No Polish ü ü ü ü ü

Hot Melt ü ü ü ü ü ü ü ü

Crimplok ü ü ü ü

Epoxy ü ü ü ü ü ü

3M™ Crimplok™+ Connectors 3M™ Crimplok™+ Connectors provide fast, easy field installation of 250 μm

and 900 μm singlemode and multimode fiber without a splice, gel or adhesive.

The connectors are SC compatible with a metallic element that mechanically

locks the fiber in place. To install, the fiber is cleaved, inserted through the

connector and locked in place using the 3M™ Crimplok™+ Protrusion Setting

Tool and the fiber tip polished with the 3M™ Crimplok™+ Nano Finishing Tool.

This hand tool utilizes a polishing film and an orbital mechanism that polishes

with a single turn of the handle. Once completed, the connector is cleaned and

ready for use.

Crimplok+ Connectors have a thermally balanced design that is tested for

premises and FTTP applications for indoor and outdoor conditions from

-40°F to 167°F. The connectors have a streamlined boot attached to the

body, minimizing the chance of losing or forgetting to install it during the

termination process. After installation, the boot helps keep the fiber from

kinking, even during side pull.

The Crimplok+ Connectors and Tools are RoHS compliant.*

3M™ Crimplok™+ Connector Family

Features and Benefits3M™ Crimplok™+ Connectors

No splice, gel or adhesive Eliminates splice interface/potential optical loss point

Simple assembly tools Fast, easy installation without electrical power

Thermally balanced design Excellent optical performance from -40°F to 167°F

Polishing film with every connector Always have new polishing film

One-piece, pre-assembled design No small, loose parts

Field installation Always the right cable length with no cable slack to store

SC/APC angle polish Low reflection, <-60 dB for outdoor temperatures

Field-polished fiber tip

Field fiber through connector

Mechanical fiber crimp (No splice or gel)

3M™ Crimplok™+ Connector SC Series SpecificationsMultimode Singlemode

Product Number 6700-50 6700-50/LOMFF 6700-62.5 8700-UPC 8700-APC

Reflection (dB) Typical

<-30 <-30 <-25 <-40 <-65

Insertion loss (dB) Typical

0.2 0.2 0.2 0.2 0.2

Connector durability, after 500 matings

<0.1 dB change <0.1 dB change <0.1 dB change <0.2 dB change <0.2 dB change

Operating temperature -10°C to 60°C -10°C to 60°C -10°C to 60°C -40°C to 75°C -40°C to 75°C

(14°F to 140°F) (14°F to 140°F) (14°F to 140°F) (-40°F to 167°F) (-40°F to 167°F)

Cable tension (in service)

Straight pull <0.1 dB increase at 5N

(1.1 lb) for 900 μm*

<0.1 dB increase at 5N

(1.1 lb) for 900 μm*


(1.1 lb) for 900 μm*

<0.5 dB increase at 6.9N

(1.54 lb) for 900 μm*


(1.54 lb) for 900 μm*

Side pull <0.1 dB increase at 2N

(0.4 lb) for 900 μm


(0.4 lb) for 900 μm


(0.4 lb) for 900 μm


(1.54 lb) for 900 μm


(1.54 lb) for 900 μm

Housing/Boot color Black/White Aqua/White Beige/White Blue/White Green/White

Material

Connector ferrule Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic

Connector housing and body Engineered resin Engineered resin Engineered resin Engineered resin Engineered resin

Boot Thermoplastic elastomer

Thermoplastic elastomer




Flame retardancy UL-94V-0 UL-94V-0 UL-94V-0 UL-94V-0 UL-94V-0

Protusion setting tool 8765-PS/UPC 8765-PS/UPC 8765-PS/UPC 8765-PS/UPC 8765-PS/APC

Nano finishing tool 8765-NF/UPC 8765-NF/UPC 8765-NF/UPC 8765-NF/UPC 8765-NF/APC

Field termination kit 8765-UPC 8765-UPC 8765-UPC 8765-UPC 8765-APC

* Connectors tested under load.

3M™ Crimplok™+ Connector Ordering InformationProduct Number Description Packaging Min. Order UPC

8700-UPC Crimplok+ Connector SC/UPC SM 250/900 μm 12/package 12 each 80-6113-8067-8

8700-PS/UPC Crimplok+ Connector SC/UPC SM 250/900 μm with Protrusion Setting Tool

60/package 60 each 80-6113-8750-9

8700-APC Crimplok+ Connector SC/APC SM 250/900 μm 12/package 12 each 80-6113-8068-6

8700-PS/APC Crimplok+ Connector SC/APC SM 250/900 μm with Protrusion Setting Tool

60/package 60 each 80-6113-8751-7

6700-50 Crimplok+ Connector SC MM 50 μm 250/900 μm 12/package 12 each 80-6114-7902-5

6700-PS/50 Crimplok+ Connector SC MM 50 μm 250/900 μm with Protrusion Setting Tool

60/package 60 each 80-6114-7905-8

6700-50/LOMMF Crimplok+ Connector SC MM 50 μm LOMMF 250/900 μm 12/package 12 each 80-6114-7903-3

6700-PS/50/LOMMF Crimplok+ Connector SC MM 50 μm LOMMF 250/900 μm with Protrusion Setting Tool

60/package 60 each 80-6114-7906-6

6700-62.5 Crimplok+ Connector SC MM 62.5 μm 250/900 μm 12/package 12 each 80-6114-7904-1

6700-PS/62.5 Crimplok+ Connector SC MM 62.5 μm 250/900 μm with Protrusion Setting Tool

60/package 60 each 80-6114-7907-4

3M™ No Polish Connectors (NPC)3M No Polish Connectors help enable fast, on-site installation of 250 μm and 900 μm

singlemode and multimode fiber utilizing a one-piece, pre-assembled design that

eliminates field polishing and loose parts. For jacketed bend-insensitive fiber cable,

the SC and LC No Polish Connectors can be installed without an assembly tool.

A twist-on boot clamps onto the cable jacket and aramid fiber to provide excellent

strain relief. It is ideal for FTTP drop terminations as well as LAN structured

cabling backbone, and fiber-to-the-enclosure applications. With a factory-polished

ferrule assembly and a mechanical splice, the connector can be quickly installed —

without electrical power — using a simple field tool that is included in every box of

60 connectors (when required).

For excellent mechanical performance, the NPC has internal gripping elements for

the strain relief of the 900 μm buffer along with a unique, bell-shaped boot. The

boot is attached to the connector body, minimizing the chance of losing or forgetting

to install it during the termination process. After installation, the boot helps keep the

fiber from kinking, even during side pull. For jacketed cable, a twist-on, hard shell

boot clamps onto the cable jacket and aramid fiber to provide excellent strain relief.

The SC/APC and LC/APC compatible connectors are available with a standard,

flat splice configuration or with a keyed, angle splice for excellent back reflection of

<-60 dB across temperature extremes. To maximize installation yield, the splice in

the connector can be opened and reused with a cap lifter. The assembly tool and cap

lifter are included in every box of 60 connectors (when required).

3M™ No Polish SC Connector Family

3M™ No Polish SC (left) and LC Connector for Jacketed Cable

3M™ No Polish ST Connector Family

3M™ No Polish LC Connector Family

Features and Benefits3M™ No Polish Connectors

Field installation Right cable length with no cable slack to store

Simple assembly tool Fast, easy installation

900 µm buffer/cable jacket strain relief Excellent pull out strength

Factory-polished fiber stub in ferrule No on-site polish or adhesives required

Keyed, angle cleave splice for APC Low reflection, <-60 dB across temperature extremes

Reusable Maximize installation yield

3M™ No Polish LC Connector SpecificationsMultimode Singlemode

Connector Type LC LC LC LC LC/APC LC/APC

Product Number 6830-50 6830-50LOMMF 6830-62.5 8830 8830-APC/FS 8830-APC/AS

Applications Data Data Data Data, IPTV Data, IPTV Data, IPTV, Analog TV

Shell color Black Aqua Beige Blue Green Green

Boot color White White White White White Green

Fiber type 50 µm MM 50 µm 10 Gig MM 62.5 µm MM SM SM SM

Cleave Flat Flat Flat Flat Flat Angle

Assembly tool 8835-AT 8835-AT 8835-AT 8835-AT 8835-AT 8835-AT


0.1 0.1 0.1 0.3 0.3 0.3


<-25 <-25 <-25 <-40 <-55 <-65

Reflection (dB) Max at -40°C to 75°C (-40°F to 167°F)

<-20 <-20 <-20 <-35 <-35 <-60

Connector durability <0.2 dB after 500 matings

<0.2 dB after 500 matings





Operating temperature Connector only (cable dependent)

-40°C to 75°C (-40 to 167°F)

-40°C to 75°C (-40 to 167°F)

-40°C to 75°C (-40 to 167°F)

-40°C to 75°C (-40 to 167°F)

-40°C to 75°C (-40 to 167°F)

-40°C to 75°C (-40 to 167°F)

Storage temperature -40°C to 85°C (-40 to 185°F)

-40°C to 85°C (-40 to 185°F)

-40°C to 85°C (-40 to 185°F)

-40°C to 85°C (-40 to 185°F)

-40°C to 85°C (-40 to 185°F)

-40°C to 85°C (-40 to 185°F)

Cable tension Straight pull

<0.1 dB increase at 4.9N (1.1lb) for

900 µm*


900 µm*


900 µm*

<0.5 dB increase; 4.9N (1.1lb) for 250 µm & 6.9N

(1.54lb) for 900 µm*


(1.54lb) for 900 µm*


(1.54lb) for 900 µm*

Side pull <0.1 dB increase at 4.9N (1.1lb) for

900 µm


900 µm


900 µm


900 µm


900 µm


900 µm

Material Connector ferrule

Connector housing and body

Boot

Zirconia ceramic

Engineered resin


Zirconia ceramic

Engineered resin


Zirconia ceramic

Engineered resin


Zirconia ceramic

Engineered resin


Zirconia ceramic

Engineered resin


Zirconia ceramic

Engineered resin


Flame retardancy UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0

Field termination kit (no power needed)

8865-C 8865-C 8865-C 8865-C 8865-C 2565

Wavelengths (nm) 850, 1300 850, 1300 850, 1300 1310, 1490, 1550, 1625

1310, 1490, 1550, 1625

1310, 1490, 1550, 1625

Water immersion 43°C (109°F), 3 days

— — — <0.2 dB increase after 24 hour

dry time

<0.2 dB increase after 24 hour

dry time

<0.2 dB increase after 24 hour dry

time

* Connectors tested under load. Note: The LC Multimode No Polish Connector meets EIA/TIA 568-B.3 and IEC requirements.

3M™ No Polish SC Connector SpecificationsMultimode Singlemode

Connector Type SC SC SC SC SC/APC SC/APC

Product Number 6800-50 6800-50LOMMF 6800-62.5 8800 8800-APC/FS 8800-APC/AS

Applications Data Data Data Data, IPTV Data, IPTV Data, IPTV, Analog TV

Shell color Black Aqua Beige Blue Green Green

Boot color White White White White White Green

Fiber type 50 µm MM 50 µm 10 Gig MM 62.5 µm MM SM SM SM

Cleave Flat Flat Flat Flat Flat Angle

Assembly tool 8865-AT 8865-AT 8865-AT 8865-AT 8865-AT 8865-AT


0.2 0.2 0.2 0.3 0.3 0.3


<-30 <-30 <-25 <-40 <-55 <-65

Reflection (dB) Max at -40°C to 75°C (-40°F to 167°F)

<-20 <-20 <-20 <-35 <-35 <-60

Connector durability <0.1 dB after 500 matings







-40°C to 75°C (-40 to 167°F)

-40°C to 75°C (-40 to 167°F)

-40°C to 75°C (-40 to 167°F)

-40°C to 75°C (-40 to 167°F)

-40°C to 75°C (-40 to 167°F)

-40°C to 75°C (-40 to 167°F)

Storage temperature -40°C to 85°C (-40 to 185°F)

-40°C to 85°C (-40 to 185°F)

-40°C to 85°C (-40 to 185°F)

-40°C to 85°C (-40 to 185°F)

-40°C to 85°C (-40 to 185°F)

-40°C to 85°C (-40 to 185°F)



900 µm*


900 µm*


900 µm*

<0.1 dB increase; 4.9N (1.1lb) for 250µm & 6.9N

(1.54lb) for 900 µm*

<0.5 dB increase; 6.9N (1.54lb) for

900 µm*


900 µm*

Side pull <0.1 dB increase at 2.2N (0.5lb) for

900 µm


900 µm


900 µm


900 µm


900 µm


900 µm



Boot

Zirconia ceramic

Engineered resin


Zirconia ceramic

Engineered resin


Zirconia ceramic

Engineered resin


Zirconia ceramic

Engineered resin


Zirconia ceramic

Engineered resin


Zirconia ceramic

Engineered resin


Flame retardancy UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0

Field termination kit (no power needed)

8865-C 8865-C 8865-C 8865-C 8865-C 2565

Wavelengths (nm) 850, 1300 850, 1300 850, 1300 1310, 1490, 1550, 1625

1310, 1490, 1550, 1625

1310, 1490, 1550, 1625

Water immersion 43°C (109°F), 3 days

—

—

—

<0.2 dB increase after 24 hour dry

time


dry time


dry time

* Connectors tested under load Note: The SC Multimode No Polish Connector meets EIA/TIA 568-B.3 and IEC requirements.

3M™ No Polish Connector SC/UPC Jacket SpecificationsMultimode Singlemode

Product Number 6802-T/50/1.6-3 6802-T/50/LOMMF/1.6-3 6802-T/62.5/1.6-3 8802-T/1.6-3


<-30 <-30 <-25 <-40


0.2 0.2 0.2 0.3


<0.1 dB change <0.1 dB change <0.1 dB change <0.1 dB change

Operating temperature -10°C to 60°C -10°C to 60°C -10°C to 60°C -40°C to 75°C

(14°F to 140°F) (14°F to 140°F) (14°F to 140°F) (-40°F to 167°F)

Cable tension (jacket cable)

Straight pull <0.1 dB increase at 50N(11.24 lb)*

<0.1 dB increase at 50N(11.24 lb)*

<0.1 dB increase at 50N(11.24 lb)*

<0.2 dB increase at 24.5N(5.5 lb)*

Side pull <0.1 dB increase at 19.4N(4.4 lb)

<0.1 dB increase at 19.4N(4.4 lb)

<0.1 dB increase at 19.4N(4.4 lb)

Housing/Boot color Black/Black Aqua/Black Beige/Black Blue/Black

Material

Connector ferrule Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic

Connector housing and boot Engineered resin Engineered resin Engineered resin Engineered resin

Field termination kit 8865-C 8865-C 8865-C 8865-C

* Connectors tested under load. Note: The SC Multimode No Polish Connector Jacket meets EIA/TIA 568-8.3. Compatible with SC mate standards.

3M™ No Polish Connector LC/UPC Jacket SpecificationsMultimode Singlemode

Product Number 6832-T/50/1.6-2 6832-T/50/LOMMF/1.6-2 6832-T/62.5/1.6-2 8832-T/1.6-2


<-30 <-30 <-25 <-40


0.2 0.2 0.2 0.3




(14°F to 140°F) (14°F to 140°F) (14°F to 140°F) (14°F to 140°F)

Cable tension (jacket cable)

Straight pull <0.1 dB increase at 33.4N (7.5 lb)

<0.1 dB increase at 33.4N (7.5 lb)



Side pull <0.1 dB increase at 12.9N (2.9 lb)




Housing/Boot color Black/White Aqua/White Beige/White Blue/White

Material


Connector housing and boot Engineered resin Engineered resin Engineered resin Engineered resin

Field termination kit 8865-C 8865-C 8865-C 8865-C

Note: The LC No Polish Connector Jacket meets EIA/TIA 568-8.3.

3M™ No Polish ST Connector SpecificationsMultimode Singlemode

Product Number 6840-50 6840-50/LOMMF 6840-62.5 8840


<-30 <-30 <-25 <-40


@ 1300 nm 0.2 0.2 0.2 ―—

@ 1310, 1490, 1550, 1625 nm ―— —― —― 0.3




(14°F to 140°F) (14°F to 140°F) (14°F to 140°F) (14°F to 140°F)

Cable retention (900 µm buffered fiber)*

Straight pull <0.1 dB Δ IL at 5 N (1.12 lbf)

<0.1 dB Δ IL at 5 N (1.12 lbf)

<0.1 dB Δ IL at 5 N (1.12 lbf)

<0.1 dB Δ IL at 5 N (1.12 lbf)

Side pull 90° <0.1 dB Δ IL at 2 N (.45 lbf)

<0.1 dB Δ IL at 2 N (.45 lbf)

<0.1 dB Δ IL at 2 N (.45 lbf)

<0.1 dB Δ IL at 2 N (.45 lbf)

Housing/Boot Color Black/White Aqua/White Beige/White Blue/White

Material


Connector housing and body Engineered resin Engineered resin Engineered resin Engineered resin

Boot Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer

Flame retardancy UL-94-V-0 UL-94-V-0 UL-94-V-0 UL-94-V-0

Field Termination Kit 8865-C 8865-C 8865-C 8865-C

* Measurements taken before and after loading. Note: The ST No Polish Connector meets EIA/TIA 568-8.3.

3M™ No Polish ST Connector Ordering Information

Product Number Description Packaging Min. Order 3M ID

6840-50 No Polish ST Connector MM 50 µm, 250/900 buffer, 60 pack (black housing) with assembly tool

60/package 60 each 80-6113-9511-4

6840-50/12 No Polish ST Connector MM 50 µm, 250/900 buffer, 12 pack (black housing) 12/package 12 each 80-6113-9514-8

6840-50/LOMMF No Polish ST Connector MM 50 µm LO, 250/900 buffer, 60 pack (aqua housing) with assembly tool

60/package 60 each 80-6113-9512-2

6840-50/LOMMF/12 No Polish ST Connector MM 50 µm LO, 250/900 buffer, 12 pack (aqua housing) 12/package 12 each 80-6113-9515-5

6840-62.5 No Polish ST Connector MM 62.5 µm, 250/900 buffer, 60 pack (beige housing) with assembly tool

60/package 60 each 80-6113-9513-0

6840-62.5/12 No Polish ST Connector MM 62.5 µm, 250/900 buffer, 12 pack (beige housing) 12/package 12 each 80-6113-9516-3

8840 No Polish ST Connector SM, 250/900 buffer, 60 pack (blue housing) with assembly tool

60/package 60 each 80-6113-9517-1

8840/12 No Polish ST Connector SM, 250/900 buffer, 12 pack (blue housing) 12/package 12 each 80-6113-9518-9

8845-AT No Polish ST Connector Assembly Tool 1 each 1 each 80-6113-9519-7

3M™ No Polish SC and LC Connector Ordering InformationProduct Number Description Packaging Min. Order 3M ID

6800-50 MM No Polish SC Connector 50 µm 1/bag, 60/carton 60 each 80-6113-2623-4

6800-50/LOMMF MM No Polish SC Connector 50 µm laser optimized 1/bag, 60/carton 60 each 80-6113-2624-2

6800-62.5 MM No Polish SC Connector 62.5 µm 1/bag, 60/carton 60 each 80-6113-2625-9

6830-50 MM No Polish LC Connector 50 µm 1/bag, 60/carton 60 each 80-6113-2773-7

6830-50/LOMMF MM No Polish LC Connector 50 µm laser optimized 1/bag, 60/carton 60 each 80-6113-2774-5

6830-62.5 MM No Polish LC Connector 62.5 µm 1/bag, 60/carton 60 each 80-6113-2775-2

8800 SM No Polish SC/UPC Connector 1/bag, 60/carton 60 each 80-6113-2622-6

8800-APC/AS SM No Polish SC/APC Connector angle splice 1/bag, 60/carton 60 each 80-6113-2627-5

8800-APC/FS SM No Polish SC/APC Connector flat splice 1/bag, 60/carton 60 each 80-6113-2626-7

8830 SM No Polish LC/UPC Connector 1/bag, 60/carton 60 each 80-6113-2776-0

8830-APC/AS SM No Polish LC/APC Connector angle splice 1/bag, 60/carton 60 each 80-6113-2777-8

8830-APC/FS SM No Polish LC/APC Connector flat splice 1/bag, 60/carton 60 each 80-6113-2778-6

8835-AT No Polish LC Connector Assembly Tool 1 each 1 each 80-6113-2797-6

8865-AT No Polish SC Connector Assembly Tool 1 each 1 each 80-6113-2630-9

Note: MM - Multimode; SM - Singlemode; LOMMF - Laser Optimized Multimode Fiber (OM3) Every carton of 60 connectors contain the appropriate assembly tool.

3M™ No Polish Connector LC/UPC Jacket Ordering InformationProduct Number Description Packaging Min. Order 3M ID

8832-T/1.6-2 No Polish LC/UPC Connector SM 50 µm 1.6-2.0 mm Jacket 60/package 60 each 80-6113-9839-9

6832-T/50/1.6-2 No Polish LC/UPC Connector MM 50 µm 1.6-2.0 mm Jacket 60/package 60 each 80-6113-9840-7

6832-T/50/LOMMF/1.6-2 No Polish LC/UPC Connector MM 50 µm LOMMF 1.6-2.0 mm Jacket 60/package 60 each 80-6113-9841-5

6832-T/62.5/1.6-2 No Polish LC/UPC Connector MM 62.5 µm 1.6-2.0 mm Jacket 60/package 60 each 80-6113-9842-3

8802-FUR/900 No Polish Connector Furcation Tube for 900 µm fiber (100/bag) 600/package 600 each 80-6113-9845-6

3M™ No Polish Connector SC/UPC Jacket Ordering InformationProduct Number Description Packaging Min. Order 3M ID

6802-T/50/1.6-3 No Polish SC/UPC Connector MM 50 µm 1.6-3.0 mm Jacket 60/package 60 each 80-6113-9828-2

6802-T/50/LOMMF/1.6-3 No Polish SC/UPC Connector MM 50 µm LOMMF 1.6-3.0 mm Jacket 60/package 60 each 80-6113-9829-0

6802-T/62.5/1.6-3 No Polish SC/UPC Connector MM 62.5 µm 1.6-3.0 mm Jacket 60/package 60 each 80-6113-9830-8

8802-FUR/900 No Polish SC Connector Furcation Tube for 900 µm fiber (100/bag) 600/package 600 each 80-6113-9845-6

8802-T/1.6-3 No Polish SC/UPC Connector SM 1.6-3.0 mm Jacket 60/package 60 each 80-6113-3507-8

3M Hot Melt Connector Specifications Multimode Singlemode

Connector Type ST FC SC LC ST FC SC LC

Product Number 6100 6200 6300 6600 8100YS 8200 8300 8600

Fiber size (µm) 125 125 125 125 125 125 125 125


<0.2 <0.2 <0.2 <0.2 <0.2 <0.2 <0.2 <0.2


-25 -25 -25 -25 -40 -40 -40 -55

Connection durability (dB) Change after 500 matings

<0.2 <0.2 <0.2 <0.2 <0.2 <0.2 <0.2 <0.2


-10° to 60°C (14° to 140°F)

-10° to 60°C (14° to 140°F)

-10° to 60°C (14° to 140°F)

-10° to 60°C (14° to 140°F)

-10° to 60°C (14° to 140°F)

-10° to 60°C (14° to 140°F)

-10° to 60°C (14° to 140°F)

-10° to 60°C (14° to 140°F)

Features and Benefits3M™ Hot Melt LC, SC, ST and FC Connectors

Pre-loaded hot melt adhesive Extended shelf life as compared to epoxy versions; fewer consumables (cost effective); no epoxy to mix; no syringe needed; shorter set-up time; no mess; no waste

No waiting for epoxy to cure Termination in approximately two minutes increases productivity; short heat and cool cycle; saves time

Single-step polish for multimode Only one abrasive to buy; faster polishing (cost effective)

Extended adhesive shelf life Reduces outdated epoxy inventory and stock rotation requirements

Pre-radiused PC ferrule Designed to provide contact of fibers; consistent performance

Zirconia ceramic ferrule Durability; stability through temperature change; quality performance

Meets TIA/EIA 568-B.3 specifications Rugged, reliable performance

3M™ Hot Melt SC Connector

3M™ Hot Melt LC Connector

3M™ Hot Melt Connectors3M Hot Melt Connectors come pre-loaded with advanced 3M hot melt adhesive.

There is no need for epoxy mixing and application so the termination time

averages just two minutes. The 3M hot melt connector’s reliability, high

performance and ease of use, in both indoor and outdoor LANs worldwide,

have made it an industry favorite.

The 3M™ Hot Melt LC Connector in both singlemode and multimode has all

the advantages of our pre-loaded hot melt technology — and at half the size

of our SC connector. With its high-performance adhesive and precision-

centered ferrule polishing, it meets TIA 568B.3 requirements for a broad

range of applications.

3M Hot Melt Connector Ordering InformationProduct Number Description Packaging Min. Order 3M ID

6100-B MM Hot Melt ST ceramic, black boot 1/bag, 60/carton 60 each 80-6111-2754-1

6100-R MM Hot Melt ST ceramic, red boot 1/bag, 60/carton 60 each 80-6111-2755-8

6100-W MM Hot Melt ST ceramic, white boot 1/bag, 60/carton 60 each 80-6111-2753-3

6200 MM Hot Melt FC ceramic, white boot 1/bag, 60/carton 60 each 80-6111-2758-2

6300-W MM Hot Melt SC ceramic, white boot 1/bag, 60/carton 60 each 80-6111-2757-4

6600-S MM Hot Melt LC simplex 900 BTW white boot 1/bag, 60/carton 60 each 80-6113-1429-7

6602-S MM Hot Melt LC simplex 1.6-2.0 cable white boot 1/bag, 60/carton 60 each 80-6113-1349-7

6603-S MM Hot Melt LC simplex 2.4-3.0 cable white boot 1/bag, 60/carton 60 each 80-6113-1430-5

6601-D MM Hot Melt LC duplex 900 buffer white/beige boots 1/bag, 60/carton 60 each 80-6113-1431-3

6602-D MM Hot Melt LC duplex 1.6-2.0 cable white/beige boots 1/bag, 60/carton 60 each 80-6113-1350-5

6603-D MM Hot Melt LC duplex 2.4-3.0 cable white/beige boots 1/bag, 60/carton 60 each 80-6113-1432-1

6604-D MM Hot Melt LC duplex 900 buffer red/black boots 1/bag, 60/carton 60 each 80-6113-1433-9

6605-D MM Hot Melt LC duplex 1.6-2.0 cable red/black boots 1/bag, 60/carton 60 each 80-6113-1434-7

6606-D MM Hot Melt LC duplex 2.4-3.0 cable red/black boots 1/bag, 60/carton 60 each 80-6113-1435-4

8100-YS SM Hot Melt ST ceramic, yellow boot 1/bag, 60/carton 60 each 80-6111-2762-4

8200-W SM Hot Melt FC ceramic, white boot 1/bag, 60/carton 60 each 80-6111-7612-6

8300 SM Hot Melt SC ceramic, white boot 1/bag, 60/carton 60 each 80-6111-2765-7

8600-S SM Hot Melt LC simplex 900 BTW white boot 1/bag, 60/carton 60 each 80-6113-1436-2

8602-S SM Hot Melt LC simplex 1.6-2.0 cable white boot 1/bag, 60/carton 60 each 80-6113-1351-3

8603-S SM Hot Melt LC simplex 2.4-3.0 cable white boot 1/bag, 60/carton 60 each 80-6113-1437-0

8601-D SM Hot Melt LC duplex 900 buffer white/beige boots 1/bag, 60/carton 60 each 80-6113-1438-8

8602-D SM Hot Melt LC duplex 1.6-2.0 cable white/beige boots 1/bag, 60/carton 60 each 80-6113-1352-1

8603-D SM Hot Melt LC duplex 2.4-3.0 cable white/beige boots 1/bag, 60/carton 60 each 80-6113-1439-6

Note: MM – Multimode; SM – Singlemode

3M™ Hot Melt Connector Specifications (continued)

Multimode Singlemode

Connector Type ST FC SC LC ST FC SC LC

Product Number 6100 6200 6300 6600 8100YS 8200 8300 8600

Storage temperature -40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)


—

<0.5 dB increase at

20.5 lbs

<0.5 dB increase at 11.24 lbs.

—

—



—

Side pull —

<0.5 dB increase at

3.0 lbs

<0.5 dB increase at

3 lbs.

—

—


<0.1 dB increase at 0.5 lbs. for 900 µm

—

Testing specifications TIA* TIA* TIA* TIA* TIA* TIA* TIA* TIA*



Boot

Zirconia ceramic

Engineered

resin


Zirconia ceramic

Engineered

resin


Zirconia ceramic

Engineered

resin


Zirconia ceramic

Engineered

resin


Zirconia ceramic

Engineered

resin


Zirconia ceramic

Engineered

resin


Zirconia ceramic

Engineered

resin


Zirconia ceramic

Engineered

resin


Flame retardancy UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0

Field termination kit 120 V220 V

6366 6362

6366 6362

63666362

+ 6366 6362

6366 6362

63666362

+

*TIA =v TIA/EIA 568-B.3; Telcordia GR-326-CORE+ LC hot melt connectors require the 6650-LC expansion kit plus either the 6366 or 6362

Features and Benefits3M™ Crimplok™ Connectors

Non-adhesive, non-splice design Clean and simple terminations

No tool set-up required Improved efficiency

No waiting for epoxy to cure Termination in less than one minute with fully prepared fiber

No power or electricity required Installation practically anywhere

Meets TIA/EIA 568-B.3 specifications Rugged, reliable performance

3M Crimplok Connector Ordering InformationProduct Number Connector Type Package Minimum Order 3M ID

6900 MM Crimplok SC Connector ceramic 60/carton 60 each 80-6108-4525-9

6901 MM Crimplok ST Connector ceramic 60/carton 60 each 80-6108-4523-4

8900 SM Crimplok SC Connector ceramic 60/carton 60 each 80-6110-1257-8

8901 SM Crimplok ST Connector ceramic 60/carton 60 each 80-6110-1259-4

Note: MM - Multimode; SM - Singlemode

3M Crimplok Connector SpecificationsMultimode Singlemode

Connector Type SC ST SC ST

Product Number 6900 6901 8900 8901

Fiber size (µm) 125 125 125 125


<0.2 <0.2 <0.2 <0.2


-27 -25 -40 -40

Connector durability (dB) Change after 500 matings

<0.2 <0.3 <0.2 <0.3

Operating temperature -10° to 60°C (14° to 140°F)

-10° to 60°C (14° to 140°F)

-10° to 60°C (14° to 140°F)

-10° to 60°C (14° to 140°F)

Storage temperature -40° to 85°C(-40° to 185°F)

-40° to 85°C(-40° to 185°F)

-40° to 80°C (-40° to 176°F)

-40° to 85°C(-40° to 185°F)

Cable tension Straight pull <0.5 dB increase at 11.24 lbs.

— <0.5 dB increase at 11.24 lbs.

—

Side pull <0.5 dB increase at 3 lbs. — <0.5 dB increase at 3 lbs. —

MaterialConnector ferruleConnector housingBoot

Zirconia ceramic Engineered resin


Zirconia ceramicThermoplastic polymer


Zirconia ceramic Engineered resin


Zirconia ceramic Thermoplastic polymer


Flame retardancy UL-94 V-O UL-94 V-O UL-94 V-O UL-94 V-O

Connector identification Black Body Beige Shell Black Boot

Black Body Beige Shell Beige Boot

Black Body Blue Shell Black Boot

Black BodyBeige ShellBlue Boot

Field termination kit No power needed 6955 6955 6955 6955

3M™ Crimplok™ Connectors3M™ Crimplok™ Connectors need no adhesive, providing the speed of non-adhesive

connectors with the optical performance of 3M™ Hot Melt Connectors. 3M Crimplok

connectors combine the speed of non-adhesive connectors with the performance

to meet TIA 568B.3. By using proven malleable metal element fiber-gripping

technology, these connectors are designed to be easily installed virtually anywhere

without the need for electrical power. Termination time is less than one minute,

making Crimplok connectors ideal for quick fiber connections to the desk. 3M™ Crimplok™ ST Connector

3M™ Epoxy Connectors3M Epoxy Connectors feature a pre-radiused, zirconia ceramic PC ferrule designed

to provide contact of fibers for low reflection and low insertion loss. The 3M epoxy

SC and FC connectors are intermateable within NTT specifications. Singlemode

epoxy connectors are tested to Telcordia GR-326-CORE. These connectors are built

to exacting ferrule length tolerances for maximum machine polish yield and bulk

packaged to maximize factory cable assembly efficiency. 3M Epoxy Connectors

can also be used with an anaerobic adhesive for fast-cure interconnect applications.

Features and Benefits 3M™ Epoxy SC, ST and FC Connectors

Pre-radiused PC ferrule Fiber centered in radius; improved performance; designed to provide contact of fibers; low reflection; consistent performance; excellent transmission performance

Zirconia ceramic ferrule Durability; stability through temperature change; quality performance; reduces reflection problems; field polish ≤-45 dB reflection (singlemode epoxy only)

Pull-proof (independent) ferrule Designed to maintain optical contact (FC, SC)

High strength thermoplastic housing Virtually eliminates flaking; resists corrosion (FC, SC)

Tested to Telcordia (SM) Rugged and reliable long-term performance (FC,SC)

3M™ Epoxy SC Connector

3M™ Epoxy Connector SpecificationsMultimode Singlemode

Connector Type SC ST FC SC ST FC SC & FC/APC

Product Number 6306 6105 6202 8306 8106 8203 8306 | 8206/APC

Fiber size (µm) 125 125 125 126 126 126 126

Insertion loss (dB) Typical field mount @ 1300 nm

<0.2 <0.2 <0.2 <0.3 <0.3 <0.3 <0.2


-25 -25 -25 -45 -40 -45 -65

Connection durability (dB) Change after 500 matings

<0.2 <0.21000 matings

<0.2 <0.2 <0.2 <0.2 <0.2


-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

Storage temperature -40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)

-40° to 85°C (-40° to 185°F)



— <0.5 dB increase

at 20.5 lbs.


— <0.5 dB increase

at 20.5 lbs.

<0.5 dB increase

at 20.5 lbs.

Side pull <0.5 dB increase at 3

lbs.

— <0.5 dB increase at 3 lbs.

<0.3 dB increase at 3

lbs.

— <0.5 dB increase at 3 lbs.

<0.5 dB increase at 3

lbs.

Testing specifications TIA* TIA* TIA* Telcordia/TIA* TIA* Telcordia/TIA* Telcordia/TIA*


Zirconia ceramic

Zirconia ceramic

Zirconia ceramic

Zirconia ceramic

Zirconia ceramic

Zirconia ceramic

Zirconia ceramic

Connector housing & body

Engineered resin

Nickel plated zinc

Engineered resin

Engineered resin

Nickel plated zinc

Nickel plated zinc

Engineered resin

Boot Thermoplastic elastomer







Flame retardancy UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0

* Notes: TIA = TIA/EIA 568-B.3; Telcordia GR-326-CORE Specifications listed above based on a 2-part epoxy application. See “Termination Kits” section for 3M Epoxy Connector termination tools.

3M Epoxy Connector Ordering InformationProduct Number Connector Type Package Minimum Order 3M ID

6306 MM Epoxy SC Connector ceramic 1/bag, 60/carton 60 each 80-6107-6501-0



8306 SM Epoxy SC Connector ceramic 1/bag, 60/carton 60 each 80-6107-6498-9

8306-SC/APC SM Epoxy SC/APC Connector ceramic 1/bag, 60/carton 60 each 80-6111-6899-0

8106 SM Epoxy ST Connector ceramic 1/bag, 60/carton 60 each 80-6103-1827-3

8203 SM Epoxy FC Connector ceramic 1/bag, 60/carton 60 each 80-6107-6537-4

8206-FC/APC SM Epoxy FC/APC Connector ceramic 1/bag, 60/carton 60 each 80-6111-6900-6

Note: MM - Multimode; SM - Singlemode

3M Termination Kits provide the tools and materials necessary to terminate the major fiber optic connectors in the industry

today. Kits are available to meet your needs in terminating a variety of connectors.

3M™ Termination Kits

3M™ Crimplok™+ Connector Kits3M™ Crimplok™+ Connector Kits 8765-UPC/8765-APC provide the tools needed to terminate 3M Crimplok+ Connectors 8700-

UPC 6700 and 8700-APC series, respectively. Both kits contain the same fiber preparation tools including a high quality cleaver, a

work surface and a case with an integrated hook for easy hanging. Each kit contains a specific 3M™ Crimplok™+ Protustion Setting

Tool and 3M™ Crimplok™+ Nano Finishing Tool, depending upon the connector type. UPC tools provide a square finish while

APC tools provide a 8° angled finish.

3M™ Crimplok™+ SC/UPC Connector Kit 8765-UPC for 3M™ Cripmlok™+ Connectors 8700-UPC and 6700 Series

3M™ Crimplok™+ SC/APC Connector Kit 8765-APC for 3M™ Crimplok™+ Connectors 8700-APC

3M™ Crimplok™+ Connector Kit Ordering InformationProduct Number Description Packaging 3M ID

8765-UPC Crimplok+ SC/UPC Connector Kit 1 kit 80-6113-8067-8

8765-APC Crimplok+ SC/APC Connector Kit 1 kit 80-6113-8073-6

Replacement Parts for 3M™ Crimplok™+ Connector Kits

Product Number Description Packaging 3M ID

8765-PS/UPC Crimplok+ SC/UPC Protusion Setting Tool 1/package 80-6113-8074-4

8765-PS/APC Crimplok+ SC/APC Protusion Setting Tool 1/package 80-6113-8095-9

8765-NF/UPC Crimplok+ SC/UPC Nano Finishing Tool 1/package 80-6113-8075-1

8765-NF/APC Crimplok+ SC/APC Nano Finishing Tool 1/package 80-6113-8096-7

2534 Fiber cleaver 1/package 80-6113-2377-7

6362-TH Stripping tool 1/package 80-6113-3936-9

6365-KS Fiber snips 1/package 80-6113-0462-9

8765-LFW Crimplok+ lint-free wipes (60 count) 1/package 80-6113-8753-3

8765-CS Crimplok+ cleaning swabs (100 count) 1/package 80-6113-8754-1

3M™ No Polish Connector Kit 8865-C

3M™ Fiber Optic Angle Cleave Kit 2565

3M™ No Polish Connector Premium Kit with Cleaver 8865-C/PR

3M™ No Polish Connector Kits3M™ No Polish Connector Kits provide the tools and

materials needed to terminate singlemode and multimode

SC and LC flat splice no polish connectors. The 3M™ No

Polish Connector Premium Kit with Cleaver 8865-C/PR

has the tools of the regular 8865-C kit, but in a larger case

with a work surface, fiber shard container, tweezers, brush

and lint-free wipes in a tub. The 3M™ Fiber Optic Angle

Cleave Kit 2565 provides the tools necessary to terminate

3M™ No Polish LC/APC and SC/APC Angle Splice

Connectors. The 3M™ Fibrlok™ Angle Splice Assembly

Tool 2501-AS is also included to terminate 3M™ Fibrlok™

Angle Splices. Replacement parts are available.

3M™ No Polish Connector Kit Ordering InformationProduct Number Description Package 3M ID

8865-C No Polish Connector Kit with cleaver 1 kit 80-6113-2379-3

8865 No Polish Connector Kit (no cleaver) 1 kit 80-6113-2378-5

8865-C/PR No Polish Connector Premium Kit with cleaver 1 kit 80-6113-8783-0

2565 Fiber optic angle cleaver kit with angle cleaver 1 kit 80-6113-2508-7

Replacement Parts for 3M™ No Polish Connector Kit

Product Number Description Package 3M ID

2534 Fiber Optic Cleaver 1 each 80-6113-2377-7

2535 Fiber Optic Angle Cleaver 1 each 80-6113-2423-9

8835-AT No Polish LC Connector Assembly Tool 1 each 80-6113-2797-6

8845-AT No Polish ST Connector Assembly Tool 1 each 80-6113-9519-7

8865-AT No Polish SC Connector Assembly Tool 1 each 80-6113-2630-9

6362-TH Stripping tool 1 each 80-6113-3936-9

6365-KS Fiber snips 1 each 80-6113-0462-9

05-00017 Lint free cloths 100 sheets 80-6104-4324-6

3M™ Hot Melt Termination Kits3M™ Hot Melt Termination Kits 6366 (120V oven) and 6362 (230V oven) contain the tools and materials necessary to

terminate 3M™ Hot Melt SC, ST, and FC Connectors, both singlemode and multimode. The 3M™ LC Hot Melt Expansion

Kit 6650-LC is used in addition to the 6366/6362 hot melt termination kits to terminate 3M™ Hot Melt LC Connectors.

Features and Benefits3M™ Hot Melt Termination Kits

Microscope with oblique and coaxial lighting Better dual view of fiber end face inspection

Roll-up tool pouch Tools are organized and accessible

Universal hot melt holders Fewer parts to carry, holds cable more securely

Instruction CD Organized into video segments for quick reference

3M Hot Melt Accessories Ordering InformationProduct Number Description Packaging 3M ID

6365-CC Hot Melt Consumable Kit for ST, SC, FC 1 each 80-6113-0452-0Lapping film, 2 µm (254X) 200 sheetsLapping film, (263X) final polish 50 sheetsLint free cloth tub 200 sheets 80-6104-4324-68892 Universal Polishing Jig 1 each 80-6110-0932-7

6191 Hot Melt Cooling Stand 1 each 80-6106-2569-3

6650-LS LC Lapping Film Singlemode Consumable Kit (polishes 400 connectors)

1 each 80-6113-1472-7

Lapping film, 9 µm (461X) 20 sheetsLapping film, 2 µm (254X) 100 sheetsLapping film, 0.5 µm (661X) 40 sheetsLapping film, final polish (863XW) 80 sheets

6650-LM LC Lapping Film Multimode Consumable Kit (polishes 400 connectors)

1 each 80-6113-1473-5

Lapping film, 9 µm (461X) 20 sheetsLapping film, 2 µm (254X) 100 sheets

3M™ Hot Melt Termination Kits 6366 and 6362-230V 3M™ Hot Melt LC Expansion Kit 6650-LC

3M Hot Melt Termination Kit Ordering InformationProduct Number Description Packaging 3M ID

6366 Hot Melt Termination Kit for ST, FC, SC Hot Melt Connectors, 120V 1 each 80-6113-2599-6

6362-230V Hot Melt Termination Kit for ST, FC, SC Hot Melt Connectors, 230V 1 each 80-6113-2598-8

6650-LC Hot Melt LC Expansion Kit 1 each 80-6113-1353-9

3M™ Hot Melt Termination Kit 6366/6362 Kit ComponentsProduct Number Description Contents Qty. Replacement MOQ Package 3M ID

6312 120V 6-port oven with cooling plate (6366 Kit) 1 1 1 80-6111-6872-7

6323 230V 6-port oven with cooling plate (6362 Kit) 1 1 each 1 80-6111-6873-5

6365-HH Universal connector holders, ST, SC, FC 6 1 pkg 4/pkg 80-6113-1476-8

6365-PP Round polishing pad 2 1 each 1 80-6113-0456-1

6192-A 2 µm lapping film (pale green) 200 1 each 500/pkg 60-6500-2346-2

863XW-DISK Final lapping film (frosted) 20 50 50/pkg 60-0200-0626-2

8892 Polishing jig 2 1 1 80-6110-0932-7

05-0002 Cable jacket stripper 1 1 1 80-6104-4314-7

6365-KS Fiber snips 1 1 1 80-6113-0462-9

6362-TH Stripping tool 1 1 1 80-6113-3936-9

6365-CT Crimp tool 1 1 1 80-6113-0454-6

6365-FS Fiber scribe 1 1 1 80-6113-0458-7

6365-VS View scope (200X) 1 1 1 80-6113-0459-5

6366-CW Cleaning wipes with dispenser 100/pkg 12 pkgs 100/pkg 80-6113-2618-4

120V power cord (6366 Kit) 1 — — —

230V UK power cord (6362 Kit) 1 — — —

230V EU power cord (6362 Kit) 1 — — —

3M™ Scotch-Weld™ adhesive 1 — — —

Alcohol bottle (empty) 1 — — —

Water bottle (empty) 1 — — —

Fiber scrap can 1 — — —

Roll up pouch 1 — — —

Fiber marking pen 1 — — —

Stripping template 1 — — —

Training CD ROM 1 — — —

Quick reference guide 1 — — —

Instructions (paper) 1 — — —

3M™ Hot Melt Oven 6312

3M™ Crimplok™ Termination KitThe Crimplok Termination Kit and

accessories provide the tools and

materials necessary to terminate

3M™ Crimplok™ Fiber Optic

Connectors. Replacement parts

are available.

3M Crimplok Termination Kit Ordering InformationProduct Number Description Packaging 3M ID

6955 Crimplok termination kit 1 kit 80-6109-3664-5

3M Crimplok Accessories Ordering InformationProduct Number Product Description Packaging 3M ID

6955-HSC Scoring head, Crimplok SC 1 each 78-8073-7664-1

6955-HST Scoring head, Crimplok ST 1 each 78-8073-7676-5

05-00251 Cleaning Wires, 12 pack 12/pkg. 80-6104-4345-1

3M Crimplok Termination Kit 6955 Kit ComponentsProduct Number Product Description Contents Qty. Replacement MOQ Packaging 3M ID

SP-00503 Lapping film, Crimplok 2 µm (254x) 50 50 50 sheets 80-6108-4532-5

SM Lapping film, Crimplok SM (263x) 50 50 50 sheets 80-6110-1312-1

6955-T Activation tool, Crimplok with ST & SC scoring heads

1 1 1 each 80-6109-3662-9

6365-CT Universal crimp tool 1 1 1 each 80-6113-0454-6

6955-P Polishing tool, Crimplok 1 1 1 each 80-6109-3727-0

8892 Universal polishing jig 1 1 1 each 80-6110-0932-7

05-00002 Cable jacket stripper 1 1 1 each 80-6104-4314-7

6365-KS Fiber snips 1 1 1 each 80-6113-0462-9

05-00017 Lint free cloths 100/pkg 1 pkg 100 sheets 80-6104-4324-6

100x view scope 1 — — —

Buffer stripper 1 — — —

Alcohol bottle (empty) 1 — — —

Water bottle (empty) 1 — — —

Scotch® brand tape 1 — — —

6362-TH Stripping tool 1 1 1 each 80-6113-3936-9

3M™ Crimplok™ Kit 6955(components displayed) 3M™ Crimplok™ Kit 6955 (components loaded in pouch)

3M™ Epoxy Termination Tools3M provides connectors with zirconia ceramic ferrules for use with two-part or anaerobic epoxy.

These very high quality connectors are ideal for use in factory assembly applications or in field-mount

restorations where a broad temperature range and stringent performance standards are required. The

following 3M materials are available to use with common termination tools available on the market.

It is important to use the proper syringe dispensing tip to assure proper placement of adhesives inside the

connector ferrule and avoid overflow.

3M™ Epoxy SC/APC and FC/APC Connectors require the angle polishing puck included in the

APC conversion kits.

3M™ Epoxy Termination Tools Ordering InformationNecessary and required for 3M connector design


05-00255 Syringe, 3 cc 25 25 80-6104-4347-7

FO-25DT Dispensing tips (green) 1 pkg of 25 1 pkg of 25 80-6107-7441-8

6365-CT Universal crimp tool 1 1 80-6113-0454-6

8365-PP Soft polishing pad 1 1 80-6113-0457-9

261X-5S FO Polish film 5 µm AL OC 4.5x5.5" SHT 500 500 60-0700-0508-1

262X-1S FO Polish film 1 µm AL OC 4.5x5.5" SHT 500 500 60-0700-0507-3

661X-1.5S FO Polish film 1.5 µm diamond 4.5x5.5" SHT 25 25 60-0700-0514-9

Recommended and available for cable preparation and connector finish


8892 Universal polishing jig 1 1 80-6110-0932-7

6365-FS Carbide fiber scribe 1 1 80-6113-0458-7

6365-KS Fiber snips 1 1 80-6113-0462-9

6362-TH Stripping tool 1 1 80-6113-3936-9

6365-VS 200x view scope 1 1 80-6113-0459-5

6366-CW Cleaning wipes with dispenser 12 12 80-6113-2618-4

05-00017 Lint free cloths 100-pack 1 1 80-6104-4324-6

3M™ Fibrlok™ Optical Splice SystemThe 3M™ Fibrlok™ Optical Splice is one of the leading mechanical splices and is now specified in

fiber-to-the-premises projects as a substitute for fusion splicing. It provides a precise, simple, and low-

cost method of splicing single and multiple optical fibers without electrical power. The Fibrlok splicing

system is designed to minimize the need for lengthy training, specialized skills or experience. Whether

your application is aerial, buried, underground or pedestal; outside plant or inside building;

Fibrlok splicing is the ideal solution.

3M™ Fibrlok™ Single Fiber Optical Splicing System 2500 SeriesThe 3M™ Fibrlok™ Single Fiber Optical Splicing System 2500 Series is designed to easily splice any

combination of 250 or 900 micron coated fibers with inexpensive tooling and no electrical power. Fibrlok

single fiber optical splices utilize a metallic splicing element held inside a molded plastic body and cap

to provide a fast, permanent splice. Index matching gel at the fiber splice interface helps enable a low-

loss splice that maintains transmission quality over the life of the network. Assembly of the inexpensive

Fibrlok splice requires only removal of the fiber coating, cleaning and cleaving of the fiber.

3M offers three different configurations of single fiber splices to meet different application needs:

Fibrlok II splicing for 250 μm or 900 μm fibers, Fibrlok 250 μm for splicing 250 μm fibers and Fibrlok

II Splice/Holder which eliminates the need for a separate assembly tool by integrating the Fibrlok II

splice, tool and tray together.

3M™ Fibrlok™ Multi-Fiber Optical Splicing System 2600 SeriesThe 3M™ Fibrlok™ Multi-fiber Optical Splicing System 2600 is designed to splice up to 12 fibers in

less than five minutes. The Fibrlok multi-fiber optical splicing system uses field proven Fibrlok single

splice technology to provide fast, efficient and permanent splicing of multiple optical fibers. Splices

are available in 4-, 8-, and 12-fiber versions.

3M™ Fibrlok™ II Universal Optical Fiber Splice 2529The 2529 optical fiber splice has successfully spliced combinations of 250 μm and

900 μm singlemode or multimode fibers for over 15 years. Utilizing the rugged, low

cost 3M™ Fibrlok™ Assembly Tool 2501, the 2529 splice can be installed in most

indoor or outdoor applications.

3M™ Fibrlok™ II Splice/Holder 2539The 2539 splice/holder integrates the 3M Fibrlok II splice 2529, actuation tool, and

holder all in one package. It helps enable fast, on-site installation without a separate

assembly tool or splice tray. 3M™ VHB™ Tape on the bottom of the splice/holder

permanently holds it at the splice location.

3M™ Fibrlok™ II Angle Fiber Splice 2529-AS The 2529-AS splice was designed for the splicing of combinations of 250 μm

and 900 μm fibers. The Fibrlok angle splices help enable fast, on-site installation

of fiber with <-60 dB optical reflection across temperature extremes for excellent

analog video transmission performance.

3M™ Fibrlok™ II Universal Optical Fiber Splice 2529

3M™ Fibrlok™ II Splice/Holder 2539

3M™ Fibrlok™ II Angle Fiber Splice 2529-AS

3M™ Fibrlok™ 250 µm Fiber Splice 2540GThe 2540G splice helps enable fast, easy splicing of 250 μm singlemode and

multimode fiber for most splice installations, including fiber-to-the-premises. Using

the small, rugged 3M™ Fibrlok™ Assembly Tool 2504G, it can be installed in almost

any environment, whether it is an aerial application or inside a building.

3M™ Fibrlok™ 250 µm Angle Fiber Splice 2540-ASThe 2540-AS splice specifically splices 250 μm fiber with a smaller form factor.

The 2540-AS angle fiber splice helps enable fast, on-site installation with <-60 dB

optical reflection across temperature extremes for excellent analog video transmission

performance.

3M™ Fibrlok™ 250 µm Fiber Splice 2540G

3M™ Fibrlok™ 250 µm Angle Fiber Splice 2540-AS

Features and Benefits3M™ Fibrlok™ Single Fiber Optical Splices

< 0.1 dB insertion loss High performance, permanent splices

30 second installation time Increased productivity

Minimum tooling requirements Low capital cost

No epoxy or electricity required Easy on-site installation

Simple, easy to use Minimal training, lower installed cost

Strong fiber retention No fiber movement

Keyed, angle cleave splice Low reflection, <-60dB across temperature extremes

3M™ Fibrlok™ Single Fiber Optical Splices Ordering InformationProduct Number Description Packaging Min. Order 3M ID

Splices

2529 Fibrlok II Universal Optical Fiber Splice for 250 and 900 µm fiber

6/pkg. 10 pkg/cs. 60 each 80-6107-5589-6

2529-K Fibrlok II 2529 Splices with Assembly Tool (60 splices, one 2501 assembly tool)

1 kit/cs. 1 kit 80-6107-5830-4

2539 Fibrlok II Splice/Holder, integrated actuation tool, and holder with tape

1/pkg. 60 pkg/cs. 60 each 80-6113-2005-4

2540G Fibrlok 250 µm Fiber Splice for 250 µm fiber 5/pkg. 12 pkg/cs. 60 each JE-4200-9482-1

2529-AS Fibrlok II Angle Fiber Splice 60/package 60 each 80-6113-2737-2

2540-AS Fibrlok 250 µm Angle Fiber Splice 60/package 60 each JE-4200-8435-0

Assembly Tools

2501 Required for Fibrlok II 2529 1/cs. 1 each 80-6105-8187-0

2504G Required for Fibrlok 250 µm 2540G 1/cs. 1 each JE-4200-8318-8

2501-AS Required for Fibrloks 2529-AS and 2540-AS 1/cs. 1 each 80-6113-2424-7

3M™ Fibrlok™ Single Fiber Optical Splices SpecificationsProduct Number 2529/2529-AS 2539 2540G/2540-AS

Dimensions 3.8 mm x 6.4 mm x 38.1 mm (0.15" x 0.25" x 1.50")

12.9 mm x 12.0 mm x 66.0 mm (0.51" x 0.47" x 2.60")

4 mm x 4 mm x 36 mm (0.16" x 0.16" x 1.42")

Fiber diameter 125 µm 125 µm 125 µm

Coating diameter 250 or 900 µm 250 or 900 µm Tight Buffer 250 µm

Installation time < 30 seconds after fiber preparation < 30 seconds after fiber preparation < 30 seconds after fiber preparation

Mean insertion loss < 0.1 dB < 0.1 dB < 0.1 dB

Return loss 2529: <-40 dB Typical2529-AS: <-60 dB

<-40 dB Typical 2540G: <-40 dB Typical2540-AS: <-60 dB

Tensile strength 4.4N (1.0 lbf) Minimum 4.4N (1.0 lbf) Minimum 4.4N (1.0 lbf) Minimum

Operating temperature -40°C to 75°C (-40°F to 167°F) -40°C to 75°C (-40°F to 167°F) -40°C to 75°C (-40°F to 167°F)

Material Engineering thermoplastic with aluminum alloy element

& index matching gel

Engineering thermoplastic with aluminum alloy element, index

matching gel & VHB tape

Engineering thermoplastic with aluminum alloy element

& index matching gel

3M™ Fibrlok™ Angle Splice Assembly Tool 2501-AS

3M™ Fibrlok™ Splice Kit with Cleaver 2559-C

3M™ Cleaver 2534

3M™ Fiber Optic Angle Cleaver Kit 2565 includes 3M™ Fiber Optic Angle Cleaver 2535, 3M™ Fibrlok™ Angle Splice Assembly Tool 2501-AS and all tools necessary for 3M™ Fibrlok™ Angle Splices.

3M Fibrlok Splice Kits and Accessories Ordering Information Product Number Description Packaging Minimum Order 3M ID

Kits

2559-C Fibrlok Splice Kit with fiber cleaver 1/cs. 1 each 80-6113-2376-9

2559 Fibrlok Splice Kit without fiber cleaver 1/cs. 1 each 80-6113-2375-1

2565 Fiber Optic Angle Cleave Kit with angle cleaver 1/cs. 1 each 80-6113-2508-7

Replacements for 3M Fibrlok Splice Kit

2501 Assembly tool required for Fibrlok II splice 2529 1/cs. 1 each 80-6105-8187-0

2504G Assembly tool required for Fibrlok 250 µm 2540G 1/cs. 1 each JE-4200-8318-8

2534 Fiber cleaver 1/cs. 1 each 80-6113-2377-7

6362-TH Stripping tool 1/cs. 1 each 80-6113-3936-9

6365-KS Fiber snips 1/cs. 1 each 80-6113-0462-9

05-00017 Lint free cloths 100/pkg. 1 pkg. 80-6104-4324-6

2535 Fiber optic angle cleaver 1/cs. 1 each 80-6113-2423-9

2501-AS Fibrlok Angle Splice assembly tool 1/cs. 1 each 80-6113-2424-7

3M™ Fibrlok™ Splice KitsThe 3M Fibrlok Splice Kits for flat splices are available with (2559-C) and without

(2559) a fiber cleaver and contain all the materials needed to terminate 3M™ Fibrlok™

Splices whether it be a singlemode or multimode splice. Detailed instructions are

also provided. Included in the kits are the 3M™ Fibrlok™ II Assembly Tool 2501 and

3M™ Fibrlok™ 250 μm Assembly Tool 2504G, simple-to-use tools designed for fast

and easy installation.

The 3M™ Fibrlok™ Splice Kit 2559-C contains:• 2501 assembly tool for 3M™ Fibrlok™ II Splice 2529

• 2504G assembly tool for 3M™ Fibrlok™ 250 μm Splice 2540G

• 3M™ Fiber Cleaver 2534 (not included in 2559 kit)

• 3M™ Fiber Stripping Tool 6362-TH

• 3M™ Fiber Snips (scissors) 6365-KS

• Lint free cloths (100/pkg.)

• Cleaning alcohol bottle

• 3M™ Fibrlok™ II splice 2529 (6 each)

• 3M™ Fibrlok™ 250 μm 2540G (5 each)

• 3M™ Fibrlok™ II Splice/Holder 2539 (2 each)

The 3M™ Fiber Optic Angle Cleaver Kit 2565 provides all the tools to terminate the

3M Fibrlok Angle Splice 2529-AS and 2540-AS. Also included in the kits are the

3M™ No Polish Connector Assembly Tools 8865-AT and 8835-AT for terminating

SC and LC angle splice connectors. Replacement parts are available.

3M™ Fibrlok™ Multi-Fiber Optical Splicing System 2600

3M™ Fibrlok™ Multi-Fiber Optical Splicing System 2600The 2600 splice uses the same field-proven Fibrlok splice technology to provide

fast, efficient and permanent splicing of multiple optical fibers. The Fibrlok multi-

fiber splicing system consists of a consumable splice “module” and associated fiber

preparation and splicing tools. Splices are available in 4-, 8-, and 12-fiber versions,

for both fiber optic ribbon and “ribbonized” fibers, and can be assembled in less

than five minutes. This makes the Fibrlok multi-fiber splice ideal for both new

construction and cable restoration applications.

3M™ Fibrlok™ Multi-Fiber Splice Preparation KitsThe 2600 splice preparation kit provides the components required to assemble

the multi-fiber splice. The 3M™ Fibrlok™ Ribbon Construction Tool 2670 provides

organization and “ribbonizing” of individual 250 μm coated fibers prior to splicing.

The Fibrlok tooling is designed to minimize the required tooling investment.

3M Fibrlok Multi-Fiber Splice and Preparation Kit Ordering InformationProduct Number Description Packaging Minimum Order 3M ID

2600 Fibrlok Multi-Fiber Optical Splice Prep Kit 1/cs. 1 each 80-6106-1765-8

2604 Fibrlok Multi-Fiber Optical Splice (4-fiber) 1/pkg. 12 pkg./cs. 12 each 80-6106-1761-7



2620 Multi-fiber optical splice actuator tool 1/cs. 1 each 80-6106-1767-4

2670 Multi-fiber ribbon construction tool kit 1/cs. 1 each 80-6106-1788-0

2671 Fiber optic ribbon construction tape 1000/pkg. 1 pkg. 80-6107-4395-9

2631-A Multi-fiber stripper wall plug transformer (230v) 1/cs. 1 each xx-xxxx-xxxx-x

2635 Multi-fiber stripper tube guide (12-fiber, AT&T ASR ribbon) 1/cs. 1 each 80-6107-4795-0

2652-B Multi-fiber cleaver spacer gauge assembly 1/cs. 1 each 80-6113-8416-7

2653 Multi-fiber holder assembly (12-fiber, AT&T ASR ribbon) 1/cs. 1 each 80-6107-7199-2

05-00017 Lint free cloths 100/pkg. 1 pkg. 80-6104-4324-6

3M™ Fibrlok™ Multi-Fiber Splice Preparation Kit 2600

Features and Benefits 3M™ Fibrlok™ Multi-Fiber Optical Splicing System 2600

3M proprietary metallic splice element High performance, permanent

Simple splice actuation tool Fast – fiber optic splices

Minimum tooling requirements Lowers capital costs

Requires no epoxy or electricity Helps enable easy on-site installation

Completes splice in less than five minutes Ideal for both new construction and cable restoration applications

Integrated fiber splice element and protective cover Fibers aligned precisely and permanently in place

Expertise in your application. 3M products are high-quality, versatile, easy to install, and facilitate high-speed deployment – giving you a smarter total

solution. For years, customers have relied on 3M fiber optics technologies to leverage existing infrastructure or to install

completely new networks. 3M continues to develop new and innovative products to extend our breadth of line, and help

improve your bottom line.

Fiber Optic Splices and Connectors3M™ Crimplok™+ SC Connectors

3M™ No Polish SC/LC/ST Connectors

3M™ No Polish SC and LC Connectors for Jacketed Cable

3M™ Hot Melt LC/SC/ST/FC Connectors

3M™ Crimplok™ SC/ST Connectors

3M™ Fibrlok™ Single-Fiber Optical Splicing System 2500 Series

3M™ Fibrlok™ Multi-Fiber Optical Splicing System 2600 Series

3M™ Fiber Connector Termination Kits and Accessories

Fiber Optic Terminals and Closures3M™ Fiber Dome Closures and Terminals

3M™ Fiber Optic Splice Case 2178 Series

3M™ Fiber Splice Closure System LL Series

3M™ SLiC™ Fiber Aerial Closures and Terminals

Fiber Pathways3M™ One Pass Fiber Pathway (Hallway)

3M™ One Pass Mini Fiber Pathway

3M Fiber Optic ProductsFiber Distribution Terminals3M™ Mini Cable Transition Box BTI

3M™ Sub-Compact Cable Transition Terminal CTB-FTB

3M™ Sub-Compact Fiber Distribution Terminal PBPOC 6-12

3M™ Sub-Compact Fiber Distribution Box PBPO 6-12

3M™ Compact Fiber Distribution Box PBO-T1

Locating and Marking Products3M™ Dynatel™ Locators 2200 Series

3M™ Dynatel™ Locators 2200M/M-iD Series

3M™ Dynatel™ Marker Locator 1420-iD Series

3M™ Electronic Marker System (EMS)

Network Accessories3M™ Fire Protection Products

3M™ Holding and Fastening Products

3M™ Identification Products

3M™ Reflective Tape

3M™ ScotchCode™ Marker and Label Products

3M™ and Scotch® Vinyl Electrical Tapes

The Network of NetworksThe 3M Network of Networks is a world leader in communication technology, connecting products, people and companies by harnessing the power of more than 45 technology platforms to create customer-centric innovations. The Network of Networks connects smart grids to smart phones, datacenters to desktops, greenfield to brownfield, wireline to wireless and customers to their goals. To get the Network of Networks working for you, visit 3M.com/Telecom.

Please recycle. Printed in USA.© 3M 2013. All rights reserved.80-6113-8674-1

3

Communication Markets Division6801 River Place Blvd.Austin, TX 78726-9000800/426 8688Fax 800/626 0329www.3M.com/Telecom

3M, Fibrlok, VHB, SLiC, Dynatel, Scotch, Scotchcode, Scotch-Weld and Crimplok are trademarks of 3M Company.

Note: Product specifications and descriptions in this document are subject to change.

Important NoticeAll statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 12 months from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether indirect, special, incidental or consequential regardless of the legal theory asserted.

*http://solutions.3m.com/wps/portal/3M/en_US/SD/Supplier/Direct/Resource/RoHS/

Fiber Connections - Platt Electric Supply...splice, no gel and no adhesive. The 3M Fibrlok Optical...

Documents

Transcript of Fiber Connections - Platt Electric Supply...splice, no gel and no adhesive. The 3M Fibrlok Optical...