F.E.T.S. Mechanical Engineering Update

By P. Savage

7th September 2007

Activities:

1) RFQ cold model end flange inserts

2) RFQ cold model couplers

3) FETS support stand rail system

4) Laserwire beam profile measurement tank

1) RFQ cold model end flange inserts

Due for delivery on September 3rd but anticipate a delay of approx. one week.

Activities:

1) RFQ cold model end flange inserts

2) RFQ cold model couplers

3) FETS support stand rail system

4) Laserwire beam profile measurement tank

Activities:

1) RFQ cold model end flange inserts

2) RFQ cold model couplers

3) FETS support stand rail system

4) Laserwire beam profile measurement tank

The FETS support stands in R8

The FETS support stand with rails

Beam

•Floor to centre of beam = 1650mm

•Rail diameter = 50mm

•Rail spacing = 800mm

•Floor to centre of rail = 800mm

The FETS support stands main parameters

The FETS support stands vee blocks

Corner vee block – 4 per stand

Mid vee block – where needed

Due for delivery on September 10th.

Activities:

1) RFQ cold model end flange inserts

2) RFQ cold model couplers

3) FETS support stand rail system

4) Laserwire beam profile measurement tank

Design concept of the laserwire beam profile measurement tank

Layout of four ALIO linear/rotary stages

Beam pipe

Beam

Design concept of the laserwire beam profile measurement tank

Solenoid

Faraday cup

Post acceleration conceptual design