FERRI Remote control slope mowers
description
Transcript of FERRI Remote control slope mowers
TECHNICAL DOCUMENTATION
Remote controlslope mowerPower and control in your hands
2
Maximum safety with the standardequipped roll bar.
iCUT4 the most powerful remote control slope mower in its category providing top performance in the most challenging ground conditions. An amazing reliable and consistent machine sticking to steep gradients like a spider on a glass wall.
The workshops Ferri, founded in 1844, stand for innovation and qualityin the design and construction of hedgecutters, flail mowers and hydraulic flail heads for excavators.
A Company consistently endeavouring in the search for the highest quality and products performance associated with scrupulous customer care.
iCUT4 is available in two versions:
• 4-cylinder engine more power to tackle slopes and difficult terrains.
• Intuitive control-box with display visualizing operations step by step.
• Bigger fuel tank for greater autonomy and economy.
• Fixed tracks (iCUT4 TRACK 1.3 m)• Expandable tracks (iCUT4 FLEX from 1.30 m to 1 m) to work in restricted areas and facilitate the transport.
55° 55°
TECHNICAL DOCUMENTATION 3
Diesel engine 4-cylinder
Engine power 35.9 kW/49 HP
Max Torque 1.800 (rpm) 139.5 Nm
Displacement (cc) 2179
Engine suction natural air flow
Speed (rpm) adjustable
Cooling system liquid
Heat exchanger for engine coolant and hydraulic oilSelf clean reversible blades
Engine
The most powerful engine in its category, with 4-cylinder, 35.9 kW/49 HP, 2179 cc, to deliver the maximum torque (139.5 Nm) and tackle with less effort the toughest terrain and slopes.
4
Hydraulic SystemThe Load Sensing technology significantly reduces energy dissipation by matching the pump flow rate to that required by the user.The advantage is constituted by a hydraulic optimization of the oil flow needs for the benefit of consumption.
Thanks to the Flow Sharing valve in case of saturation of flow (which occurs when the demand of oil is higher than the flow rate delivered by the pump) the distributor provides the proportional reduction of the flow of each spool.The result is a greater efficiency, characterized to ensure in all circumstances the maximum productivity.
Variable displacement piston pump for travel and services;five section distributor.
5TECHNICAL DOCUMENTATION
Control boxA state-of-the-art last generation remote control box offers a LED display with:• engine coolant temperature gauge• hydraulic oil temperature gauge• battery indicator• floating system on light• engine oil pressure light• fuel reserve• clogged up air filter light.
An acoustic alarm alerts the operator of any faults.
In addition to the immediate cut-off button the remote control box is also equipped with a safety device that sends a stop signal to the machine in the event of sudden and unjustified inclination of the control box itself.A cruise control system that can be activated from the console allows the automatic speed adjustment.
1 2 3422
23
21 5
6
7
8
9
20
19
18
17 16 15 14 13 12 11 10
1 8 16
2 9 17
3 10 18
4 11 19
5 12 20
6 13 21
7 14 22
15 23
display
commands for changing parameters
RH track forward / backward
undercarriage opening / closing (iCUT4 FLEX)
1st and 2nd speed
floating
horn
key power
start
rotor start
accelerator
oil flow adjustement
emergency push botton
cruise control
auxiliary intake
auxiliary intake
rotor sense of direction
connecting cable
reversible self cleaning fan
engine stop
engine start
arm lift and drop
LH track forward / backward
Console functions
sidecontrols
sidecontrols
6
1 7
2 8
3 9
4 10
5 11
6 12
engine oil low pressure light
clogged up air filter light
charging battery light
operating machine warning light
working lights switch
pre-heating sparking plugs light
high water temperature light
fuel reserve
ignition key
cable socket
power cut-off button
working hours clock
1 2 3 4 5
6789101112
Diagnostic
Starter panel
Failures related to any operating function can be easily detected through a display located on the electric box.
The warnings as per points 1, 2, 3, 7 and 8 in the starter panel, also appear on the console display allowing the operator to have full control of the machine functions.
7TECHNICAL DOCUMENTATION
Adjustable undercarriageIn iCUT4 FLEX design we have also taken into consideration:• the need to operate in confined spaces (A)• transporting the machine on trucks or vans (B).
(A) The iCUT4 width can be contracted via the control box from 130 cm to 100 cm. The 135 cm flail head can be replaced with another model with a 100 cm cutting width.
(B) With the 135 cm flail head, it is in any case possible from the console to reduce the width of the undercarriage and then lift and tilt the flail head obtaining an overall width well within the desired tracks contraction.
iCUT4 FLEX
8
TracksWide section tracks to apply less specific pressure on the ground.
with steel treads
with steel treads and spikes
STANDARD
STANDARD PLUS
GRIP
GRIP PLUS
UndercarriageA triple flange track roller placed close to the sprocket along with a track chain guard secure the tracks functionality reducing detracking risks.
5 rollersto ensure an optimized weights distribution and to achieve a consistent grip when tackling challenging gradients.
Fixed undercarriage (serial on iCUT4 TRACK model)
1.30 m
Adjustable undercarriage (serial on iCUT4 FLEX)
from 1.30 m to 1.00 m
Carrier rollers n° 5
9TECHNICAL DOCUMENTATION
Floating systemA mixed system, mechanical and hydraulic allows the flail mower to follow ground contours smoothly.
A pre-loaded spring device moves the weight of flail mower back to the carrier decreasing friction in forward transfer.
Width (without mower - iCUT4 TRACK model)
1,30 m
Width (without mower - iCUT4 FLEX model)
from 1,30 m to 1,00 m
Heigth 1,27 m
Length (without mower)
2,32 m
Length (with R1000 and R1300 mower)
3,07 m
Weight (with R1300 mower - iCUT4 TRACK model)
1.370 kg
Weight (with R1300 mower - iCUT4 FLEX model)
1.460 kg
Dimensions
1350 mm 1300 mm 1740 mm2320 mm3070 mm
1480 mm
1270
mm
10
Cutting tools
Cutting tools
Multiuse blades Forged hammers
Articulated “y” blades
Turning hammers
Flail mowers
Hydraulic forestry mulcher
Model R1000 R1300 R1700
Working width m 1,05 1,35 1,65
Weight kg 170 190 240
Multiuse blades n° 36 44 –
Forged hammers n° 18 22 –
Articulated “y” blades n° 36 44 56
Model RF1300
Working width m 1,32
Weight kg 370
Turning hammers n° 18
News
News
News
11TECHNICAL DOCUMENTATION
EngineENGINE 4-cylinder Diesel ISUZU
ENGINE POWER 35.9 kW/49 HP
POWER Diesel
LUBRICATION from 0° to 55°
FUEL TANK CAPACITY 32 liters
MAX TORQUE 139.5 Nm at 1800 rpm
DISPLACEMENT 2179 cc
INTAKE natural
SPEED adjustable (rpm)
COOLING SYSTEM liquid
HEAT EXCHANGER for engine coolant and hydraulic oil
FAN reversible self cleaning fan
TransmissionMAXIMUM WORKING GRADIENT 55°
TRANSMISSION hydraulic - 2 speed
BRAKE negative automatic
TRAVEL SPEED 0-3.5 km/h slow from 0 to 7.0 km/h fast
Hydraulic SystemPUMP FOR TRAVEL AND SERVICES piston with variable displacement
and load sensing
ROTOR DRIVE PUMP piston fixed displacement
DISTRIBUTOR 5 sections Flow Sharing
HYDRAULIC oil 46 liters
ControlsRADIO CONTROL 100-150 m radius
MOVEMENTS THROUGH JOYSTICK proportional
MACHINE MOVEMENTS forward-backward / left-right
Technical features Interchangeable toolsFlail mowersROTOR RPM 3000
ROTOR DSR (Double Sense of Rotation)
BLADE TIP SPEED 1 m/sec.
HYDRAULIC MOTOR piston
REAR ADJUSTABLE ROLLER (three position) (R Serie)
WEAR RESISTANT SIDE SKIDS adjustable in height (R and RF Serie)
FLOATING SYSTEM mechanical and hydraulic
TRANSMISSION toothed belt and pulley
Standard equipmentCABLE REMOTE CONTROL
EMERGENCY CABLE CONTROL
BEACON
LIFTING HOOKS
ADDITIONAL ELECTRICAL CONNECTOR
HYDRAULIC QUICK COUPLINGS
FIRST AUXILIARY HYDRAULIC
INTUITIVE CONTROL BOX WITH DISPLAY
EMERGENCY PUSH BOTTON
ROLL BAR
BIOLOGIC OIL
TOWBAR
SECOND AUXILIARY HYDRAULIC (TRACK Serie)
FRONT HOOD OPENING KIT FOR FLAIL HEAD (RF Serie)
Optional equipmentSECOND AUXILIARY HYDRAULIC (FLEX Serie)
TABLE LIGHT TRIANGLE (500 mm)
SPOTLIGHT
PAINTING ON REQUEST
WINCH
FRONT HOOD OPENING KIT FOR FLAIL HEAD (R Serie - Only Extra C.E. countries)
FLAIL HEAD SIDESHIFT KIT
SNOW BLADE
SPUMP GRINDER
TRENCHER
SNOW BLOWER
SWEEPER
UndercarriageFIXED UNDERCARRIAGE serial on iCUT4 TRACK model (1.3 m)
ADJUSTABLE UNDERCARRIAGE serial on iCUT4 FLEX model (from 1.3 m to 1.0 m)
CARRIER ROLLERS n° 5
QR code generated on http://qrcode.littleidiot.be
Ferri srl Via Govoni, 30 - 44034 Tamara (FE) ItalyTel. +39 0532 866866 - Fax +39 0532 866851www.ferrisrl.it - [email protected]
FERRI France Plaine de Fontgrave - 81800 RABASTENSTél. +33 (0)5 63 40 84 00 - Fax +33 (0)5 63 40 84 08www.ferri-france.fr - [email protected]
www.icut4.com
Remote control slope mower
iCUT
4 -
EN -
01.
15 -
250
- ca
mpb
ella
dv.c
om -
682
14