February 2020 Price ListP F 2 W ww.ais-inc.com Revision Feb 2020 ... AO2 Statement of Line 3 AO2...
Transcript of February 2020 Price ListP F 2 W ww.ais-inc.com Revision Feb 2020 ... AO2 Statement of Line 3 AO2...
AO2
February 2020 Price List
2Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
TABLE OF CONTENTS
PRODUCT INFORMATIONAO2 Statement of Line 3AO2 Finish Options 5
PANELSAO2 Panels Product Details 7Non-Powered Hard Surface Panels 10Powered Hard Surface Panels 12Non-Powered Hard Surface Acoustical Panels 14Powered Hard Surface Acoustical Panels 15Non-Powered Quarter Glass Panels 16Powered Quarter Glass Panels 17Non-Powered Half Glass Panels 18Powered Half Glass Panels 19Non-Powered Air Flow / Wall Access Panels 20Powered Air Flow / Wall Access Panels 22ADA Door Panels 24Sliding Doors 25
CONNECTORSStraight Rod Connectors 262-Way Connectors, 3-Way Connectors, 4-Way Connectors and End Caps 27Wall Mount Kits, HiLo Finishing Trips and Wall Tracks 28
ELECTRICALAO2 Electrical Product Details 29Jumpers 31Duplex Outlets 32In-Feeds 33Retrofit Kits, Power/Data Pole Kits, Junction Boxes, Data Plate Kits 34
SUPPORTCantilevers and Side Support/Rear Brackets 35End Panels and Brackets 36Panel Mounted A-Legs 37
STORAGEMid-Height Shelf Units 38Mid-Height Corner Shelf Units 39Type C Flipper Door Units 40Type C Raised Flipper Door Units 41Type D Flipper and Raised Flipper Door Units 42Sliding Door Units 43Raised Sliding Door Units 44Cabinet Door Units 45Raised Cabinet Door Units 46
ACCSESSORIESTackboards, Tool Rail Kits and Panel Coat Hooks 47Whiteboards 48
WARRANTY & TERMS AND CONDITIONSFor Warranty & Terms and Conditions please visit:https://aiscmsprod blob core windows net/infocenter/AISTermsWarranty pdf
AO2
3Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
STATEMENT OF LINEPanels, Connectors and Electrical
AO2PANELS
CONNECTORS
Hard Surface PanelsPowered or Non-Powered
Hard Surface Acoustical PanelsPowered or Non-Powered
Quarter Glass PanelsPowered or Non-Powered
Half Glass PanelsPowered or Non-Powered
Air Flow / Wall Access PanelsPowered or Non-Powered
Sliding Door Handle Kits
Straight Rod Connectors
Wall Mount Kits
Panel-to-Panel Jumpers Transitional Jumpers Lateral Pass Through Jumpers
USB OutletsDuplex Outlets
HiLo Finishing StripsUnequal Height Straight Rod
Connector Kits
2-Way Connectors
Wall Tracks3-Way Connectors
Non-Locking Sliding DoorsADA Door PanelsWith or Without Glass, Left or Right HandWithout Glass Right Hand Door Shown
4-Way Connectors
ELECTRICAL
Duplex Outlet Hole Covers
Side Mounted Base In-Feeds
Receptacle Mounted Base In-Feed
Ceiling In-Feeds Electrical Retrofit Kits Data Plate Kits Hardwire Junction Box Double Channel Power / Data Pole Kit
AO2
4Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
STATEMENT OF LINESupport, Storage and Accessories
SUPPORT
STORAGE
ACCESSORIES
Standard Cantilevers
Clear Access End Panels
Shared Cantilevers Side Support / Rear Brackets Panel Mounted Shelf Cantilevers Standard End Panels
Pedestal-to-Pedestal Attachment Bracket
Countertop Brackets Panel Mounted A-Legs
Mid-Height Shelf Units Linear Mid-Height Shelf Units Mid-Height Corner Shelf Unit Linear Mid-Height Corner Shelf Unit
Type C Flipper Door UnitMetal/Fabric or Laminate FrontMetal/Fabric Door Front Shown
Type C Raised Flipper Door UnitMetal/Fabric or Laminate FrontMetal/Fabric Door Front Shown
Type D Flipper Door Unit Type D Raised Flipper Door Unit
Sliding Door UnitMetal/Fabric or Laminate FrontMetal/Fabric Door Front Shown
Raised Sliding Door UnitMetal/Fabric or Laminate FrontMetal/Fabric Door Front Shown
Cabinet Door UnitMetal/Fabric or Laminate FrontMetal/Fabric Door Front Shown
Raised Cabinet Door UnitMetal/Fabric or Laminate FrontMetal/Fabric Door Front Shown
Tackboards Tool Rail Kits Tool Rail Kits White Board w/ Marker TrayFramed or Frameless
Framed White Board Shown
AO2
5Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
FINISH OPTIONSFabric Options
• It is mandatory that you work directly with your AIS Customer Service Representative for all COM related testing and orders. They will provide all necessary forms to you, as well as work with you with regard to sending in correct yardage and where to send it, along with necessary RA# or #s. Please note an RA must be submitted along with the fabric for testing, as well as an RA created for an actual order.
• Please Note: A three to five yard sample is required for testing and approval for use on all monolithic panel systems. A one yard sample is required for testing and approval on Divi Insert Tiles, Matrix Tiles, flipper doors and tackboards. We may be able to test upholstery fabrics with a swatch, your Customer Service Representative will advise based on the fabric being tested; otherwise a 1 yard sample must be submitted for testing. Results take 48 - 72 hours.
• Customer Service must be advised as to the width of the fabric rolls being supplied (54”W or 60”W). Customer Service must also be advised if the fabric has a backer. • Yardage required for the job must be calculated by an AIS Customer Service Rep.• Once AIS has approved the COM fabric, a fabric sample needs to be marked by the dealer with “Front”, “Top”, and “Bottom”, to be sure fabric is applied correctly. The fabric
sample then needs to be attached to a COM Fabric Dealer Form and forwarded to AIS Customer Service. The COM Fabric Dealer Form may be downloaded or printed here.• Fabrics may be discontinued or obsolete without notice.• Contact AIS Customer Service with any questions regarding fabric availability. • All directional fabric will be railroaded.
PANEL FABRICS BY GUILFORD OF MAINEName Style Number GradeAnchorage 2335 BBailey 2299 BDrift 2539 BLido 2858 BMingle 2527 BSpinel 3582 BSprite 2671 BStreetwise 2721 BReeds 3078 BTweed 2737 BBix 3008 CBroadcast 2758 CCoastline 3495 CCrosstown 2526 CFr701 2100 CAuster 2537 DBlock Party 2538 DGroove 3497 DLily Pad 2318 DNetwork 4158 DNitro 2317 DPhone Tag 2314 DRegatta 2400 DTempest 2120 DCosmos 2655 E
PANEL FABRICS BY AISName Style Number GradeAvenue Dusk 2062 AAvenue Park Place 2064 ACape Cod Chatham 2711 ACape Cod Falmouth 2712 ACape Cod Harwich 2713 ACape Cod Hyannis 2714 ACape Cod Martha’s Vineyard 2715 ACape Cod Nantucket 2716 ACape Cod Provincetown 2717 AEngage Denim 2066 AEngage Neutral 2065 AEngage Rain Cloud 2067 AEngage Toffee 2068 ANew England Boston 2700 ANew England Cambridge 2701 ANew England Concord 2702 ANew England Dixville Notch 2703 ANew England Hartford 2704 ANew England Lexington 2705 ANew England Newton 2706 ANew England Providence 2707 ANew England Rockport 2708 ANew England Salem 2709 ANew England York 2710 ARainfall Bliss 2059 ARainfall Shore 2060 ARainfall Sundown 2057 ARainfall Twilight 2058 ASimplicity Blue Smooth 2001 ASimplicity Chamoise 2002 ASimplicity Grey Blue 2004 ASimplicity Sandy Pebble 2005 ASimplicity Stone 2530 ASimplicity Twizzle Tan 2008 AStream Light Sand 2501 A
C.O.M. Fabric Policy
AO2
6Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
FINISH OPTIONSPaint, Edgeband, Laminate and Tempered Glass Options
AO2 PAINT OPTIONSName Color Code AO2 Panel Grade AO2 Base GradeBlack BK A -Chalk CK - -Dark Tone DT A AGrey Value 1 GV1 A -Innertone HT A -Light Tone LT A -Medium Tone MT A ASatin White SW - -Warm Brown WB A -Champagne Metallic CHM - -Dark Grey Metallic DGM - -Flint Grey Metallic FGM - -Light Grey LG - -Metallic Silver MS - -Tan Value 1 TV1 B -Warm White WW - -Woodrose WR - -Antique Gold AG - -Blue BL - -Graphite Sky GS - -Lite Silver Smooth LSS - -Orange OG - -Red RD - -Violet VT - -Yellow YW - -
• Minimum order size for any custom color is $75,000 list. Extended lead-time will apply.• Any color not shown on Quick Ship, Standard Grade A, B or C will be considered custom.• A $450 net paint match fee will be assessed following receipt of (2) 5”x5” samples of
paint being matched. • Minimum order size for any custom color is $75,000.00 list. Extended lead-time will apply.• Additionally, Grade C paint up-charges will be applied to all applicable products on
the order.• Important Custom Paint Note: Most paint match pricing can be covered by the Grade
C up-charge in the catalog, however the final pricing can only be determined after the paint is matched and a product list is provided to AIS customer service. An additional fee may apply based on job size and paint color.
Custom Paints Custom Edgeband Options
EDGEBAND OPTIONSName Color Code GradeAbsolute Acajou AA AAimtoo Savatre AS ABlack BK ABrazilwood BZ ACabinet Almond CA AChalk CK ACorporate Walnut CT ADark Rum Cherry DR ADark Tone DT AGrand Cherry GC AGrey Value 1 GV1 AInnertone HT ALeave Likatre LV ALight Tone LT ALooks Likatre LK AMedium Tone MT AMidwest Maple MM ANightfall NF ARecon Oak RC ASatin White / True White SW / TW AStorm ST ASummer Drops SD ATrytoo Savatre TS AWarm Brown #1 WB1 AWoodrose WR A
• A $450 net edge match fee will be assessed to custom match non-standard edgeband. • Minimum order size for any custom color is $75,000.00 list. Extended lead-time will apply.
AO2 LAMINATE OPTIONSName GradeAbsolute Acajou BAimtoo Savatre BBlack BBrazilwood BCabinet Almond BChalk BCorporate Walnut BDark Rum Cherry BGrand Cherry BLeave Likatre BLinen BLooks Likatre BMaritime Dune BMidwest Maple BNightfall BParis White Potterware BRecon Oak BStorm BSummer Drops BTitanium EV BTrue White BTrytoo Savatre BWhite Chocolate B
TEMPERED GLASS OPTIONS
NamePanels/Frame/Tiles/
Screens1/4” Thick
Frameless Glass3/8” Thick
Frameless GlassClear Y Y YFrosted Y Y YAqui N N YBronze Tint Y Y NGrey Tint Y Y N
All glass is tempered. The etched side of Frosted is always on Side A of the Frame or Panel. Side B of this glass options are smooth. Please see specific price list pages on each type of glass for list pricing and up-charges.
AO2
7Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
Fabric Covered, Hard Surface, Powered/Non-Powered
Quarter Glass, Fabric Covered, Hard Surface, Powered/Non-Powered
ADA Door Panel
Half Glass, Fabric Covered, Hard Surface, Powered/Non-Powered
Fabric Covered, Hard Surface Acoustic Panels, Powered/Non-Powered
Heights: Nominal Heights: 39”, 47”, 53”, 67” ,85”Actual Minimum Heights: 38 1/2”, 46 1/2”, 52 1/2”, 66 1/2”, 84 1/2” - Leveling Glide Range is 1 1/2”
Heights: Nominal Heights: 67”, 85”Actual Minimum Heights: 66 1/2”, 84 1/2” - Leveling Glide Range is 1 1/2”
Heights: Nominal Heights: 85”Actual Minimum Heights: 84 1/2” - Leveling Glide Range is 1 1/2”
Heights: Nominal Heights: 53”, 67”, 85”Actual Minimum Heights: 52 1/2”, 66 1/2”, 84 1/2” - Leveling Glide Range is 1 1/2”
Heights: Nominal Heights: 53”, 67”, 85”Actual Minimum Heights: 52 1/2”, 66 1/2”, 84 1/2” - Leveling Glide Range is 1 1/2”
Widths: Actual/Nominal Widths: 12”*, 24”, 30”, 36”, 42”, 48”, 60” (Not available in 85”H) *Non-Powered Only
Widths: Actual/Nominal Widths: 24”, 30”, 36”, 42”, 48”
Widths: Actual/Nominal Widths: 48”
Widths: Actual/Nominal Widths: 24”, 30”, 36”, 42”, 48”
Widths: Actual/Nominal Widths: 12”*, 24”, 30”, 36”, 42”, 48”, 60” (Not available in 85”H)*Non-Powered Only
PANELSAO2 Panels Product Details
Product Detail 1Panel Statement of Line
39”H47”H
53”H
67”H
85”H
53”H
67”H
85”H
67”H
85”H
52 7/16”H
70 7/16”H
53”H
67”H
85”H
39 1/2”H
85”H
OpeningWidth
35 5/16”
AO2
8Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
Product Detail 2Rules for Panel Stability without Components
The guidelines outlined below should be followed when designing AIS AO2 panels without components to ensure panel stability and safety. Change in height will not effect panel stability. Any panel not directly attached to a perpendicular panel or fixed wall will yield when pressure is applied.
4' Min
12' Max
2' Min
5'
4' Min
8' Max
4' Min
8'6' M
in
10'
2' Min
10'8' Max
8' Min
8' Min
20' Max
6' Min
16'
6' Min
4' Min
4' Min
15'
6' Min
10' Max
4' Min
2' Min
12' Max
Product Detail 3Rules for Panel Stability with Components
*
5' Max4' Max
4' Min
20' Max
4' Min
15' Max
3' Min
10' Max
2' Min
2' Min
8 '
2' Min
5' Max
4' Min
10' Max
4' Min
8' Max
3' Min
5' Max
4' Min
4' Max
3' Min
4' Max
**
*
* 30” worksurfaces must be supported at the front with side support brackets or floor support elements/pedestals.
The guidelines outlined below should be followed when designing AIS AO2 panels with components to ensure panel stability and safety. Change in height will not effect panel stability. Any panel not directly attached to a perpendicular panel or fixed wall will yield when pressure is applied.
PANELSAO2 Panels Product Details
AO2
9Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
Product Detail 4Panel Creep Dimensions
PANELSAO2 Panels Product Details
(24" x 3) = 72"
0"
24" 24" 24"
0" 0"
3 1/2" 3 1/2"
(24" x 3) + 3 1/2" = 75 1/2"
(24" X 3) + (3 1/2" X 3) = 82 1/2 "
24" 24" 24"
3 1/2"
3 1/2"
3 1/2"3 1/2" 3 1/2"
(24" x 3) + 3 1/2" = 75 1/2"
(24" X 3) + (3 1/2" X 3) = 82 1/2 "
24" 24" 24"
3 1/2"
0"
3 1/2"
3 1/2"3 1/2"
3 1/2" 3 1/2"
(24" X 3) = 72"
(24" X 3) + (3 1/2" X 2) = 79"
24" 24" 24"
0" 0"3 1/2"
3 1/2"
Small increments are added to or taken away from the length of a run of panels as a result of the many ways panels are connected to each other. The accumulation of these increments is called Panel Creep. While AIS AO2 panels are “actual” size, the addition of 2-way, 3-way, 4-way, end, and wall mount connectors add increased dimensions.
Straight Connections:Add 0” to panel run for each straight connection. 24”W (nominal) panels are shown.
3-Way Connections:Add 3 1/2” each time a perpendicular panel is inserted into a panel run.
Finished End Connections:Add 1” to the end of a panel run for each finished end cap.
Wall Mount Connections:Add 1/2” to the end of a panel run for a wall mount connection.
4-Way Connections:Add 3 1/2” each time a perpendicular panel is inserted into a panel run.
2-Way Connections:Add 3 1/2” each time a perpendicular panel is added to the end of a panel run.
(24" x 3) + 1" = 73"
0"
24" 24"
0" 1"
24"
(24" x 3) + 1/2" = 72 1/2"
0"1/2"
24" 24"
0" 1/2"
24"
AO2
10Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
Specify Notes
• Fabric Selection for Side A and B• Paint Selection for Panel Trim• Color Selection for Base Covers• Data Knockout Option
Non-Powered Panels - Hard Surface are fabric covered hard surface panels with a raceway unit.
PANELSNon-Powered Hard Surface Panels
NON-POWERED HARD SURFACE PANELSH W Model Number List Grade C Paint Data KO C.O.M Fabric Grade C Fabric Grade D Fabric39 12 P-HEFR3912 499 +10 +15 -37 +70 +13639 24 P-HEFR3924 538 +10 +15 -37 +70 +13639 30 P-HEFR3930 586 +10 +15 -37 +70 +13639 36 P-HEFR3936 662 +10 +15 -37 +70 +13639 42 P-HEFR3942 699 +10 +15 -37 +70 +13639 48 P-HEFR3948 731 +10 +15 -37 +70 +13639 60 P-HEFR3960 907 +10 +15 -37 +70 +136
47 12 P-HEFR4712 532 +10 +15 -47 +80 +16047 24 P-HEFR4724 569 +10 +15 -47 +80 +16047 30 P-HEFR4730 635 +10 +15 -47 +80 +16047 36 P-HEFR4736 724 +10 +15 -47 +80 +16047 42 P-HEFR4742 805 +10 +15 -47 +80 +16047 48 P-HEFR4748 825 +10 +15 -47 +80 +16047 60 P-HEFR4760 1,016 +10 +15 -47 +80 +160
53 12 P-HEFR5312 543 +10 +15 -57 +86 +16653 24 P-HEFR5324 582 +10 +15 -57 +86 +16653 30 P-HEFR5330 661 +10 +15 -57 +86 +16653 36 P-HEFR5336 771 +10 +15 -57 +86 +16653 42 P-HEFR5342 833 +10 +15 -57 +86 +16653 48 P-HEFR5348 886 +10 +15 -57 +86 +16653 60 P-HEFR5360 1,091 +10 +15 -57 +86 +166
AO2
11Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
Specify Notes
• Fabric Selection for Side A and B• Paint Selection for Panel Trim• Color Selection for Base Covers• Data Knockout Option
Non-Powered Panels - Hard Surface are fabric covered hard surface panels with a raceway unit.
PANELSNon-Powered Hard Surface Panels
NON-POWERED HARD SURFACE PANELSH W Model Number List Grade C Paint Data KO C.O.M Fabric Grade C Fabric Grade D Fabric67 12 P-HEFR6712 579 +10 +15 -57 +100 +19067 24 P-HEFR6724 678 +10 +15 -57 +100 +19067 30 P-HEFR6730 759 +10 +15 -57 +100 +19067 36 P-HEFR6736 875 +10 +15 -57 +100 +19067 42 P-HEFR6742 934 +10 +15 -57 +100 +19067 48 P-HEFR6748 995 +10 +15 -57 +100 +19067 60 P-HEFR6760 1,225 +10 +15 -57 +100 +190
85 12 P-HEFR8512 663 +10 +15 -94 +120 +22685 24 P-HEFR8524 801 +10 +15 -94 +120 +22685 30 P-HEFR8530 890 +10 +15 -94 +120 +22685 36 P-HEFR8536 1,023 +10 +15 -94 +120 +22685 42 P-HEFR8542 1,090 +10 +15 -94 +120 +22685 48 P-HEFR8548 1,157 +10 +15 -94 +120 +226
AO2
12Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
POWERED HARD SURFACE PANELSH W Model Number List Grade C Paint C.O.M Fabric Grade C Fabric Grade D Fabric39 24 P-HEFP3924 798 +10 -37 +70 +136
39 30 P-HEFP3930 846 +10 -37 +70 +136
39 36 P-HEFP3936 916 +10 -37 +70 +136
39 42 P-HEFP3942 956 +10 -37 +70 +136
39 48 P-HEFP3948 990 +10 -37 +70 +136
39 60 P-HEFP3960 1,158 +10 -37 +70 +136
47 24 P-HEFP4724 827 +10 -47 +80 +160
47 30 P-HEFP4730 895 +10 -47 +80 +160
47 36 P-HEFP4736 980 +10 -47 +80 +160
47 42 P-HEFP4742 1,057 +10 -47 +80 +160
47 48 P-HEFP4748 1,080 +10 -47 +80 +160
47 60 P-HEFP4760 1,269 +10 -47 +80 +160
53 24 P-HEFP5324 841 +10 -57 +86 +166
53 30 P-HEFP5330 914 +10 -57 +86 +166
53 36 P-HEFP5336 1,025 +10 -57 +86 +166
53 42 P-HEFP5342 1,083 +10 -57 +86 +166
53 48 P-HEFP5348 1,137 +10 -57 +86 +166
53 60 P-HEFP5360 1,336 +10 -57 +86 +166
Specify Notes
• Fabric Selection for Side A and B• Paint Selection for Panel Trim• Color Selection for Base Covers
Powered Panels - Hard Surface are fabric covered hard surface panels with a powered raceway unit. Duplex outlets and elec-trical jumpers are ordered separately. See “Electrical”. Two duplex outlet hole covers are included with each powered panel.
PANELSPowered Hard Surface Panels
AO2
13Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
POWERED HARD SURFACE PANELSH W Model Number List Grade C Paint C.O.M Fabric Grade C Fabric Grade D Fabric67 24 P-HEFP6724 934 +10 -57 +100 +190
67 30 P-HEFP6730 1,012 +10 -57 +100 +190
67 36 P-HEFP6736 1,130 +10 -57 +100 +190
67 42 P-HEFP6742 1,186 +10 -57 +100 +190
67 48 P-HEFP6748 1,246 +10 -57 +100 +190
67 60 P-HEFP6760 1,472 +10 -57 +100 +190
85 24 P-HEFP8524 1,054 +10 -94 +120 +226
85 30 P-HEFP8530 1,137 +10 -94 +120 +226
85 36 P-HEFP8536 1,274 +10 -94 +120 +226
85 42 P-HEFP8542 1,336 +10 -94 +120 +226
85 48 P-HEFP8548 1,406 +10 -94 +120 +226
Specify Notes
• Fabric Selection for Side A and B• Paint Selection for Panel Trim• Color Selection for Base Covers
Powered Panels - Hard Surface are fabric covered hard surface panels with a powered raceway unit. Duplex outlets and elec-trical jumpers are ordered separately. See “Electrical”. Two duplex outlet hole covers are included with each powered panel.
PANELSPowered Hard Surface Panels
AO2
14Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
NON-POWERED HARD SURFACE ACOUSTICAL PANELSH W Model Number List Grade C Paint Data KO C.O.M Fabric Grade C Fabric Grade D Fabric53 12 P-HEAR5312 695 +10 +15 -57 +86 +166
53 24 P-HEAR5324 783 +10 +15 -57 +86 +166
53 30 P-HEAR5330 851 +10 +15 -57 +86 +166
53 36 P-HEAR5336 948 +10 +15 -57 +86 +166
53 42 P-HEAR5342 996 +10 +15 -57 +86 +166
53 48 P-HEAR5348 1,051 +10 +15 -57 +86 +166
53 60 P-HEAR5360 1,284 +10 +15 -57 +86 +166
67 12 P-HEAR6712 743 +10 +15 -57 +100 +190
67 24 P-HEAR6724 817 +10 +15 -57 +100 +190
67 30 P-HEAR6730 886 +10 +15 -57 +100 +190
67 36 P-HEAR6736 991 +10 +15 -57 +100 +190
67 42 P-HEAR6742 1,033 +10 +15 -57 +100 +190
67 48 P-HEAR6748 1,094 +10 +15 -57 +100 +190
67 60 P-HEAR6760 1,315 +10 +15 -57 +100 +190
85 12 P-HEAR8512 852 +10 +15 -94 +120 +226
85 24 P-HEAR8524 941 +10 +15 -94 +120 +226
85 30 P-HEAR8530 1,015 +10 +15 -94 +120 +226
85 36 P-HEAR8536 1,150 +10 +15 -94 +120 +226
85 42 P-HEAR8542 1,207 +10 +15 -94 +120 +226
85 48 P-HEAR8548 1,290 +10 +15 -94 +120 +226
Specify Notes
• Fabric Selection for Side A and B• Paint Selection for Panel Trim• Color Selection for Base Covers• Data Knockout Options
Non-Powered Panels - Hard Surface Acoustical Panels are fabric covered hard surface panels with acoustical panels and a raceway unit. Certain fabrics may not be used on hard surface acoustical panels.
PANELSNon-Powered Hard Surface Acoustical Panels
AO2
15Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
POWERED HARD SURFACE ACOUSTICAL PANELSH W Model Number List Grade C Paint C.O.M Fabric Grade C Fabric Grade D Fabric53 24 P-HEAP5324 1,040 +10 -57 +86 +166
53 30 P-HEAP5330 1,103 +10 -57 +86 +166
53 36 P-HEAP5336 1,199 +10 -57 +86 +166
53 42 P-HEAP5342 1,248 +10 -57 +86 +166
53 48 P-HEAP5348 1,298 +10 -57 +86 +166
53 60 P-HEAP5360 1,530 +10 -57 +86 +166
67 24 P-HEAP6724 1,071 +10 -57 +100 +190
67 30 P-HEAP6730 1,136 +10 -57 +100 +190
67 36 P-HEAP6736 1,238 +10 -57 +100 +190
67 42 P-HEAP6742 1,284 +10 -57 +100 +190
67 48 P-HEAP6748 1,341 +10 -57 +100 +190
67 60 P-HEAP6760 1,559 +10 -57 +100 +190
85 24 P-HEAP8524 1,194 +10 -94 +120 +226
85 30 P-HEAP8530 1,267 +10 -94 +120 +226
85 36 P-HEAP8536 1,397 +10 -94 +120 +226
85 42 P-HEAP8542 1,456 +10 -94 +120 +226
85 48 P-HEAP8548 1,533 +10 -94 +120 +226
Specify Notes
• Fabric Selection for Side A and B• Paint Selection for Panel Trim• Color Selection for Base Covers
Powered Panels - Hard Surface Acoustical Panels are fabric covered hard surface panels with acoustical panels and a pow-ered raceway unit. Duplex outlets and electrical jumpers are ordered separately. See “Electrical”. Two duplex outlet hole covers are included with each powered panel. Certain fabrics may not be used on hard surface acoustical panels.
PANELSPowered Hard Surface Acoustical Panels
AO2
16Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
Specify Notes
• Fabric Selection for Side A and B• Paint Selection for Panel Trim• Color Selection for Base Covers• Data Knockout Options• Style Selection for Tempered Glass Insert
Quarter Glass Panels - Non-Powered have an aluminum wrapped tempered glass insert at the top of the panel that is available in multiple style finishes. The lower section of the panel is a fabric covered hard surface with a non-powered raceway unit. 45.167” Fabric Height on 67”H Panels. 59.167” Fabric Height on 85”H Panels.
NON-POWERED QUARTER GLASS PANELSH W Model Number List Grade C Paint Data KO C.O.M Fabric Grade C Fabric Grade D Fabric67 24 P-HEQGRW6724 1,467 +10 +15 -37 +70 +136
67 30 P-HEQGRW6730 1,622 +10 +15 -37 +70 +136
67 36 P-HEQGRW6736 1,774 +10 +15 -37 +70 +136
67 42 P-HEQGRW6742 1,930 +10 +15 -37 +70 +136
67 48 P-HEQGRW6748 2,083 +10 +15 -37 +70 +136
85 24 P-HEQGRW8524 1,667 +10 +15 -37 +70 +136
85 30 P-HEQGRW8530 1,851 +10 +15 -37 +70 +136
85 36 P-HEQGRW8536 2,036 +10 +15 -37 +70 +136
85 42 P-HEQGRW8542 2,219 +10 +15 -37 +70 +136
85 48 P-HEQGRW8548 2,500 +10 +15 -37 +70 +136
PANELSNon-Powered Quarter Glass Panels
AO2
17Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
POWERED QUARTER GLASS PANELSH W Model Number List Grade C Paint C.O.M Fabric Grade C Fabric Grade D Fabric67 24 P-HEQGPW6724 1,698 +10 -37 +70 +136
67 30 P-HEQGPW6730 1,855 +10 -37 +70 +136
67 36 P-HEQGPW6736 2,015 +10 -37 +70 +136
67 42 P-HEQGPW6742 2,174 +10 -37 +70 +136
67 48 P-HEQGPW6748 2,329 +10 -37 +70 +136
85 24 P-HEQGPW8524 1,903 +10 -37 +70 +136
85 30 P-HEQGPW8530 2,092 +10 -37 +70 +136
85 36 P-HEQGPW8536 2,281 +10 -37 +70 +136
85 42 P-HEQGPW8542 2,468 +10 -37 +70 +136
85 48 P-HEQGPW8548 2,659 +10 -37 +70 +136
Specify Notes
• Fabric Selection for Side A and B• Paint Selection for Panel Trim• Color Selection for Base Covers• Style Selection for Tempered Glass Insert
Quarter Glass Panels - Powered have an aluminum wrapped tempered glass insert at the top of the panel that is available in multiple style finishes. The lower section of the panel is a fabric covered hard surface with a powered raceway unit. Duplex outlets and electrical jumpers are ordered separately. See “Electrical”. Two duplex outlet hole covers are included with each powered panel. 45.167” Fabric Height on 67”H Panels. 59.167” Fabric Height on 85”H Panels.
PANELSPowered Quarter Glass Panels
AO2
18Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
Specify Notes
• Fabric Selection for Side A and B• Paint Selection for Panel Trim• Color Selection for Base Covers• Data Knockout Options• Style Selection for Tempered Glass Insert
Half Glass Panels - Non-Powered have an aluminum wrapped tempered glass insert at the top of the panel that is available in multiple style finishes. The lower section of the panel is a fabric covered hard surface with a non-powered raceway unit. Fabric height is 34.357” on all panels.
NON-POWERED HALF GLASS PANELSH W Model Number List Grade C Paint Data KO C.O.M Fabric Grade C Fabric Grade D Fabric53 24 P-HEHGRW5324 1,266 +10 +15 -37 +70 +136
53 30 P-HEHGRW5330 1,389 +10 +15 -37 +70 +136
53 36 P-HEHGRW5336 1,515 +10 +15 -37 +70 +136
53 42 P-HEHGRW5342 1,640 +10 +15 -37 +70 +136
53 48 P-HEHGRW5348 1,763 +10 +15 -37 +70 +136
67 24 P-HEHGRW6724 1,467 +10 +15 -37 +70 +136
67 30 P-HEHGRW6730 1,622 +10 +15 -37 +70 +136
67 36 P-HEHGRW6736 1,774 +10 +15 -37 +70 +136
67 42 P-HEHGRW6742 1,930 +10 +15 -37 +70 +136
67 48 P-HEHGRW6748 2,083 +10 +15 -37 +70 +136
85 24 P-HEHGRW8524 1,667 +10 +15 -37 +70 +136
85 30 P-HEHGRW8530 1,851 +10 +15 -37 +70 +136
85 36 P-HEHGRW8536 2,036 +10 +15 -37 +70 +136
85 42 P-HEHGRW8542 2,219 +10 +15 -37 +70 +136
85 48 P-HEHGRW8548 2,404 +10 +15 -37 +70 +136
PANELSNon-Powered Half Glass Panels
AO2
19Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
POWERED HALF GLASS PANELSH W Model Number List Grade C Paint C.O.M Fabric Grade C Fabric Grade D Fabric53 24 P-HEHGPW5324 1,492 +10 -37 +70 +136
53 30 P-HEHGPW5330 1,622 +10 -37 +70 +136
53 36 P-HEHGPW5336 1,746 +10 -37 +70 +136
53 42 P-HEHGPW5342 1,877 +10 -37 +70 +136
53 48 P-HEHGPW5348 2,000 +10 -37 +70 +136
67 24 P-HEHGPW6724 1,698 +10 -37 +70 +136
67 30 P-HEHGPW6730 1,855 +10 -37 +70 +136
67 36 P-HEHGPW6736 2,015 +10 -37 +70 +136
67 42 P-HEHGPW6742 2,174 +10 -37 +70 +136
67 48 P-HEHGPW6748 2,329 +10 -37 +70 +136
85 24 P-HEHGPW8524 1,903 +10 -37 +70 +136
85 30 P-HEHGPW8530 2,092 +10 -37 +70 +136
85 36 P-HEHGPW8536 2,281 +10 -37 +70 +136
85 42 P-HEHGPW8542 2,468 +10 -37 +70 +136
85 48 P-HEHGPW8548 2,659 +10 -37 +70 +136
Specify Notes
• Fabric Selection for Side A and B• Paint Selection for Panel Trim• Color Selection for Base Covers• Style Selection for Tempered Glass Insert
Half Glass Panels - Powered have an aluminum wrapped tempered glass insert at the top of the panel that is available in multiple style finishes. The lower section of the panel is a fabric covered hard surface with a powered raceway unit. Duplex outlets and electrical jumpers are ordered separately. See “Electrical”. Two duplex outlet hole covers are included with each powered panel. Fabric height is 34.357” on all panels.
PANELSPowered Half Glass Panels
AO2
20Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
NON-POWERED AIR FLOW / WALL ACCESS PANELSH W Model Number List Grade C Paint Data KO C.O.M Fabric Grade C Fabric Grade D Fabric39 24 P-HEFOBR3924 863 +10 +15 -37 +70 +136
39 30 P-HEFOBR3930 942 +10 +15 -37 +70 +136
39 36 P-HEFOBR3936 1,059 +10 +15 -37 +70 +136
39 42 P-HEFOBR3942 1,120 +10 +15 -37 +70 +136
39 48 P-HEFOBR3948 1,170 +10 +15 -37 +70 +136
39 60 P-HEFOBR3960 1,454 +10 +15 -37 +70 +136
47 24 P-HEFOBR4724 911 +10 +15 -47 +80 +160
47 30 P-HEFOBR4730 1,017 +10 +15 -47 +80 +160
47 36 P-HEFOBR4736 1,162 +10 +15 -47 +80 +160
47 42 P-HEFOBR4742 1,287 +10 +15 -47 +80 +160
47 48 P-HEFOBR4748 1,326 +10 +15 -47 +80 +160
47 60 P-HEFOBR4760 1,629 +10 +15 -47 +80 +160
53 24 P-HEFOBR5324 930 +10 +15 -57 +86 +166
53 30 P-HEFOBR5330 1,058 +10 +15 -57 +86 +166
53 36 P-HEFOBR5336 1,235 +10 +15 -57 +86 +166
53 42 P-HEFOBR5342 1,330 +10 +15 -57 +86 +166
53 48 P-HEFOBR5348 1,424 +10 +15 -57 +86 +166
53 60 P-HEFOBR5360 1,744 +10 +15 -57 +86 +166
Specify Notes
• Fabric Selection for Side A and B• Paint Selection for Panel Trim• Color Selection for Base Covers• Data Knockout Option
Non-Powered Panels - Air Flow / Wall Access are fabric covered hard surface panels. Panels may be ordered with power/data access base covers and/or raceway divider. Each panel includes all connection hinges needed for each panel. Air Flow / Wall Access Panels have a 3” fabric border around the opening that allows for air flow. The height of the opening is 16”.
PANELSNon-Powered Air Flow / Wall Access Panels
AO2
21Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
NON-POWERED AIR FLOW / WALL ACCESS PANELSH W Model Number List Grade C Paint Data KO C.O.M Fabric Grade C Fabric Grade D Fabric67 24 P-HEFOBR6724 1,087 +10 +15 -57 +100 +190
67 30 P-HEFOBR6730 1,218 +10 +15 -57 +100 +190
67 36 P-HEFOBR6736 1,405 +10 +15 -57 +100 +190
67 42 P-HEFOBR6742 1,497 +10 +15 -57 +100 +190
67 48 P-HEFOBR6748 1,595 +10 +15 -57 +100 +190
67 60 P-HEFOBR6760 1,965 +10 +15 -57 +100 +190
85 24 P-HEFOBR8524 1,282 +10 +15 -94 +120 +226
85 30 P-HEFOBR8530 1,426 +10 +15 -94 +120 +226
85 36 P-HEFOBR8536 1,642 +10 +15 -94 +120 +226
85 42 P-HEFOBR8542 1,743 +10 +15 -94 +120 +226
85 48 P-HEFOBR8548 1,852 +10 +15 -94 +120 +226
Specify Notes
• Fabric Selection for Side A and B• Paint Selection for Panel Trim• Color Selection for Base Covers• Data Knockout Option
Non-Powered Panels - Air Flow / Wall Access are fabric covered hard surface panels. Panels may be ordered with power/data access base covers and/or raceway divider. Each panel includes all connection hinges needed for each panel. Air Flow / Wall Access Panels have a 3” fabric border around the opening that allows for air flow. The height of the opening is 16”.
PANELSNon-Powered Air Flow / Wall Access Panels
AO2
22Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
Specify Notes
• Fabric Selection for Side A and B• Paint Selection for Panel Trim• Color Selection for Base Covers
Powered Panels - Air Flow / Wall Access are fabric covered hard surface panels with a powered raceway unit. Duplex outlets and electrical jumpers are ordered separately. See “Electrical”. Two duplex outlet hole covers are included with each powered panel. Air Flow / Wall Access Panels have a 3” fabric border around the opening that allows for air flow. The height of the opening is 16”.
POWERED AIR FLOW / WALL ACCESS PANELSH W Model Number List Grade C Paint C.O.M Fabric Grade C Fabric Grade D Fabric39 24 P-HEFOBP3924 1,280 +10 -37 +70 +136
39 30 P-HEFOBP3930 1,355 +10 -37 +70 +136
39 36 P-HEFOBP3936 1,471 +10 -37 +70 +136
39 42 P-HEFOBP3942 1,530 +10 -37 +70 +136
39 48 P-HEFOBP3948 1,584 +10 -37 +70 +136
39 60 P-HEFOBP3960 1,854 +10 -37 +70 +136
47 24 P-HEFOBP4724 1,327 +10 -47 +80 +160
47 30 P-HEFOBP4730 1,431 +10 -47 +80 +160
47 36 P-HEFOBP4736 1,571 +10 -47 +80 +160
47 42 P-HEFOBP4742 1,696 +10 -47 +80 +160
47 48 P-HEFOBP4748 1,733 +10 -47 +80 +160
47 60 P-HEFOBP4760 2,037 +10 -47 +80 +160
53 24 P-HEFOBP5324 1,348 +10 -57 +86 +166
53 30 P-HEFOBP5330 1,468 +10 -57 +86 +166
53 36 P-HEFOBP5336 1,646 +10 -57 +86 +166
53 42 P-HEFOBP5342 1,736 +10 -57 +86 +166
53 48 P-HEFOBP5348 1,825 +10 -57 +86 +166
53 60 P-HEFOBP5360 2,142 +10 -57 +86 +166
PANELSPowered Air Flow / Wall Access Panels
AO2
23Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
Specify Notes
• Fabric Selection for Side A and B• Paint Selection for Panel Trim• Color Selection for Base Covers
Powered Panels - Air Flow / Wall Access are fabric covered hard surface panels with a powered raceway unit. Duplex outlets and electrical jumpers are ordered separately. See “Electrical”. Two duplex outlet hole covers are included with each powered panel. Air Flow / Wall Access Panels have a 3” fabric border around the opening that allows for air flow. The height of the opening is 16”.
POWERED AIR FLOW / WALL ACCESS PANELSH W Model Number List Grade C Paint C.O.M Fabric Grade C Fabric Grade D Fabric67 24 P-HEFOBP6724 1,497 +10 -57 +100 +190
67 30 P-HEFOBP6730 1,622 +10 -57 +100 +190
67 36 P-HEFOBP6736 1,813 +10 -57 +100 +190
67 42 P-HEFOBP6742 1,900 +10 -57 +100 +190
67 48 P-HEFOBP6748 1,994 +10 -57 +100 +190
67 60 P-HEFOBP6760 2,360 +10 -57 +100 +190
85 24 P-HEFOBP8524 1,690 +10 -94 +120 +226
85 30 P-HEFOBP8530 1,825 +10 -94 +120 +226
85 36 P-HEFOBP8536 2,042 +10 -94 +120 +226
85 42 P-HEFOBP8542 2,142 +10 -94 +120 +226
85 48 P-HEFOBP8548 2,252 +10 -94 +120 +226
PANELSPowered Air Flow / Wall Access Panels
AO2
24Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
ADA DOOR PANELS
H W Type Model Number List
Grade C Panel Trim
Grade C Door Paint
85 48 Left P-HEDLA8548 2,776 +10 +100
85 48 Right P-HEDRA8548 2,776 +10 +100
Specify Notes
• Paint Selection for Door and Door Frame
• Style Selection for Tem-pered Glass Insert
ADA Door Panels use a steel tube frame with hol-low core door, stainless steel threshold, locking ADA door handle and full height transparent window. In-cludes one panel, one locking ADA lockset, and two keys. Lockset is field installed. Panel connectors are ordered separately.
ADA GLASS WINDOW DOOR PANELS
H W Type Model Number List
Grade C Panel Trim
Grade C Door Paint
85 48 Left P-HEDLAG8548 5,210 +10 +100
85 48 Right P-HEDRAG8548 5,210 +10 +100
Specify Notes
• Paint Selection for Door and Door Frame
• Style Selection for Tempered Glass Insert
ADA Glass Window Door Panels use a steel tube frame with hollow core door, stainless steel threshold, locking ADA door handle and full height transparent window. In-cludes one panel, one locking ADA lockset, and two keys. Lockset is field installed. Panel connectors are ordered separately. Note: Door has a 5” wood painted border around the glass.
Left Hand Right Hand
PANELSADA Door Panels
Left Hand Right Hand
AO2
25Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
NON-LOCKING SLIDING DOORS
H W Model Number ListGrade C
Paint67 36 P-HMRPS6736 1,753 +25
67 42 P-HMRPS6742 1,883 +25
67 48 P-HMRPS6748 2,014 +25
85 36 P-HMRPS8536 2,014 +25
85 42 P-HMRPS8542 2,185 +25
85 48 P-HMRPS8548 2,336 +25
SLIDING DOOR HANDLE KITS
Model Number ListGrade C
PaintA-UNRPSH 183 +10
Specify Notes
• Paint Selection for Sliding Door Frame
Sliding Door attaches to frame face at either left or right, outside or inside of an opening. Sliding doors are available to accommodate 36”, 42” and 48” wide openings and are 67” or 85” high. Lightweight, alu-minum frame, painted as specified, with a ribbed lex-an insert. Sliding door extends 1 1/2” into opening when fully open and stands a total of 2” off panel face. These dimensions should be taken into consid-eration when planning for ADA door openings and aisle dimension requirements if door is mounted on outside of office.
CONNECTOR HILO TRIMH Model Number List66 P-HMHILO62 90
80 P-HMHILO80 125
PANELSSliding Doors
Front Back
Notes
Notes
When specifying sliding doors at a corner application, a 2-way connector and connector HiLo trim piece needs to be ordered in addition to the sliding door. This fills the 3 1/2” gap created in this scenario.
AO2
26Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
STRAIGHT ROD CONNECTORSH Model Number List39 P-HMROD34/39 68
47 P-HMROD42/47 68
53 P-HMROD48/53 68
67 P-HMROD62/67 70
85 P-HMROD80/85 71
Notes
Straight Rod Connectors connect two panels of equal height in a straight line. See unequal straight rod connectors for connecting panels of unequal height in a straight line.
UNEQUAL HEIGHT STRAIGHT ROD CONNECTOR KITSDrop Down Model Number List Grade C Paint
85-67 P-HEHILOSK18 159 +5
85-53 P-HEHILOSK32 159 +5
85-47 P-HEHILOSK38 159 +5
85-39 P-HEHILOSK46 159 +5
67-53 P-HEHILOSK14 159 +5
67-47 P-HEHILOSK20 159 +5
67-39 P-HEHILOSK28 159 +5
53-47 P-HEHILOSK6 159 +5
53-39 P-HEHILOSK14A 159 +5
47-39 P-HEHILOSK8 159 +5
Specify Notes
• Paint Selection for HiLo Finishing Strip
Unequal Height Straight Rod Connector Kits con-nect two panels of unequal heights in a straight line. Includes one straight rod connector (which corre-sponds to the height of the low panel), one hanger frame (which corresponds to the height of the low panel), one HiLo finishing strip (finishes the side of the high panel above the HiLo connection), and HiLo finishing strip retainers
CONNECTORSStraight Rod Connectors
AO2
27Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
2-WAY CONNECTORSH Model Number List Grade C Paint39 P-HECC39 186 +5
47 P-HECC47 205 +5
53 P-HECC53 210 +5
67 P-HECC67 225 +5
85 P-HECC85 264 +5
4-WAY CONNECTORSH Model Number List Grade C Paint39 P-HMXC34/39 249 +5
47 P-HMXC42/47 289 +5
53 P-HMXC48/53 300 +5
67 P-HMXC62/67 340 +5
85 P-HMXC80/85 371 +5
FINISHED END CAPSH Model Number List Grade C Paint39 P-HEEC39 88 +5
47 P-HEEC47 94 +5
53 P-HEEC53 98 +5
67 P-HEEC67 99 +5
85 P-HEEC85 114 +5
3-WAY CONNECTORSH Model Number List Grade C Paint39 P-HETC39 260 +5
47 P-HETC47 280 +5
53 P-HETC53 297 +5
67 P-HETC67 324 +5
85 P-HETC85 367 +5
Specify Notes
• Paint Selection for Con-nector Trim
• Color Selection for Base Shroud
2-Way Connectors connect two panels of equal or unequal heights at 90°. In HiLo scenarios, specify the connector height that corresponds to the tallest pan-el in the connection. HiLo finishing strips need to be ordered separately.
Specify Notes
• Paint Selection for Con-nector Trim
• Color Selection for Base Shroud
3-Way Connectors connect three panels of equal or varying heights at 90°. In HiLo scenarios, specify the connector height that corresponds to the tallest pan-el in the connection. HiLo finishing strips need to be ordered separately.
Specify Notes
• Paint Selection for Con-nector Trim
4-Way Connectors connect four panels of equal or varying heights at 90°. In HiLo scenarios, specify the connector height that corresponds to the tallest pan-el in the connection. HiLo finishing strips need to be ordered separately.
Specify Notes
• Paint Selection for Con-nector Trim
• Color Selection for Base Shroud
Finished End Caps finish the end of a panel run where no other panels are to be connected. Includes base end cap shroud.
CONNECTORS2-Way Connectors, 3-Way Connectors, 4-Way Connectors and End Caps
AO2
28Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
WALL MOUNT KITSH Model Number List Grade C Paint39 P-HMWM34/39 75 +5
47 P-HMWM42/47 78 +5
53 P-HMWM48/53 82 +5
67 P-HMWM62/67 85 +5
85 P-HMWM80/85 94 +5
HILO FINISHING STRIPSDrop Down Model Number List Grade C Paint
85-67 P-HMHILO18 65 +5
85-53 P-HMHILO32 65 +5
85-47 P-HMHILO38 77 +5
85-39 P-HMHILO46 77 +5
67-53 P-HMHILO14 48 +5
67-47 P-HMHILO20 65 +5
67-39 P-HMHILO28 65 +5
53-47 P-HMHILO6 65 +5
53-39 P-HMHILO14 48 +5
47-39 P-HMHILO8 65 +5
Specify Notes
• Paint Selection for Con-nector Trim
Wall Mount Kits connect a panel to a fixed wall. In-cludes top and bottom connection blocks, one panel shell, and one filler strip. Hardware for attaching wall mount kit to wall is not included. Use hardware ap-propriate for wall type.
Specify Notes
• Paint Selection for HiLo Finishing Strip
HiLo Finishing Strips are used when 2-Way, 3-Way, or 4-Way connectors are connecting panels of varying heights. The HiLo finishing strip finishes the exposed side of the connector where a low panel is attached. For instance, if you have a 67”H 2-way connector with one of the panels being 47”H, order the HiLo finishing strip for a 67” to 47” drop down.
WALL TRACKSH Model Number List60 A-WTRK60HM 135
84 A-WTRK84HM 167
Notes
Wall Track mounts to fixed walls to provide a slotted channel for worksurface sup-port brackets, tackboards or shelves. Slots are on a 1” vertical repeat pattern. Wall track mounting holes are 1/4” diameter, repeating 6” on center starting 1/2” from top of the track. Note: Hardware for mounting wall track to walls is not included. Use hardware appropriate to wall type. Wall track may be shared between shelf units. Only three tracks are needed to hang two shelf units, flipper door units, or tackboards side by side. Wall tracks are composed of a black slotted insert rail within a brushed aluminum casing. Track will sit approximately 5” off floor when leveled with top of panels to accommodate wall cover base.
Important: Wall track may be shared with Matrix and AO2 storage. Wall track may not be shared with Divi and MWall storage.
CONNECTORSWall Mount Kits, HiLo Finishing Trips and Wall Tracks
AO2
29Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
ELECTRICALAO2 Electrical Product Details
Hot 1 (Black)
Hot 3 (Blue)
Metal Cable Jacket
Neutral 4 (White/Red) (#10g)
Ground 4 (Green/Yellow)
Hot 4 (Pink)
Hot 2 (Red)
Neutral 1/2/3 (White/Black) (#10g)
Ground 1/2/3 (Green)
Cross Section 8 Wire 4 Circuit Cable
AIS AO2 8 Wire 4 Circuit electrical system contains four circuits. Each circuit is rated at 20 amps/120 volts maximum. Circuit 1, Circuit 2 and Circuit 3 are served by a system neutral and an equipment ground. Circuit 4 is dedicated and is served by its own neutral and ground. Circuit and ground conductors are #12 A.G.W. (gauge). All neutrals are #10 A.G.W. (gauge).
Shown below is cross section of metal cable used for 8 Wire 4 Circuit jumpers and in-feeds. Circuit and ground conductors are #12 A.G.W. (gauge). All neutrals are #10 A.G.W. (gauge).
4D
Circuit 4 Hot Pink Wire
Circuit 1 Hot Black Wire
Circuit 1/2/3 Neutral White & Black Wire
Circuit 1/2/3 Ground Green Wire
Circuit 4 Ground Green & Yellow Wire
Circuit 4 Neutral White & Red Wire
Circuit 2 Hot Red Wire
Circuit 3 Hot Blue Wire
Hot
Gro
und
Neu
tral
Hot
Gro
und
Neu
tral
Hot
Gro
und
Neu
tral
Hot
Gro
und
Neu
tral
Line 1 Line 2 Line 3 Line 4
Jumper locking clip
Outlet mounting hole
1 Duplex outlet location
Powerway mounting holes
2 Duplex outlet locations
2 Jumper connection locations
2 Duplex outlet locations
8 Wire 4 Circuit Powerway for 36"w panel
8 Wire 4 Circuit Powerway for 24"w panel
1 Duplex outlet location
2 Jumper connection locations
2 Jumper connection locations
2 Jumper connection locations
4D
Powerways provide electrical distribution and access for duplex outlets back to back. 24” wide panels can accept only one duplex outlet per side, two total back to back. All other panels can accept two per side, four total back to back. Powerways “grow” in length with panels of greater width, making panel to panel connections a “standard” configuration and allowing for “pass through” connections. Each powerway has locations for up to four jumpers, two at each end. Powerways are included when ordering powered panels.
Duplex Outlets are available designated circuits 1 thru 4. Each duplex outlet contains two single receptacles (places to plug into) of the same circuit and are specified separately from powerways. All duplex outlets have black faces. The lettering on outlets for Circuit 1, 2 and 3 is white. The lettering on outlets for Circuit 4 is orange. Outlets are screw mounted to powerway. Duplex outlets are standard 15 amp outlets. For 20 amp outlets, call AIS Customer Service.
Common Equipment Amperages:Personal Computer ..... 2.00 - 4.00Laser Printer ................ 5.00 - 8.00 Desktop Plotter ........... 1.50Fan .............................. 1.00Heater .......................... 8.50 - 12.50Tasklight ...................... 1.00Slide Projector ............. 2.00 - 6.00Coffee Pot ....................15.00Paper Shredder ........... 4.40 - 13.00Radio ........................... 0.05Pencil Sharpener ......... 1.00Calculator .................... 0.25Answering Machine ..... 0.08
Product Detail 1Electrical Components (8 Wire, 4 Circuit)
AO2
30Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
ELECTRICALAO2 Electrical Product Details
1. Grip Attachment Strip:72” length can be cut to fit and bolted to pole and ceiling grid with hardware provided.
2. Pole Cover:Snaps in place to seal vertical channels.
3. Divider:Attached to pole shell threaded studs with rounded safety “acorn” nuts. Divider may be mounted on centered or 60/40 split to accommodate more data cables.
4. Pole Coupler:Slides into both halves of pole. Four threaded screws are tightened to form rigid pressure fit.
5. Mounting Brackets:Engage opposed on panel hanger frames to lock lower section of pole to panel. Bracket threaded studs and rounded safety “acorn” nuts attach pole to brackets.
6. Pole Shell:Relived on one end to provide means of egress for data cables and ceiling feeds. Pole top and bottom section are identical.
Product Detail 2Double Channel Power/Data Pole
Product Detail 3Integrating AIS AO2 Power
1
2
3
4
5
5
Old AIS/Old HM New AIS
Old AIS/Old HM New AIS
New AISNew AIS
New AISNew AIS
Old AIS/Old HMNew HM
New AISNew HM
New AISNew HM
18 inch Mesh Jumper(E-MX8W4PTPC18)
OEM Transition KitIncludes OEM Cable,ICon and 18 Jumper
(E-HM8W4TCK)
AO2 Panel
Powerway
18 inch mesh jumper
18 inch mesh jumper
18 inch mesh jumper
OEM CableOnly
OEM TransitionKit
OEM TransitionKit
21 inch mesh jumper
AIS AO2 Electrical Jumper Connections
21 inch Mesh Jumper(E-MX8W4PTPC21)
OEM Transition Cable(E-HM8W4TC)
Old AIS/Old HM New AIS
Old AIS/Old HM New AIS
New AISNew AIS
New AISNew AIS
Old AIS/Old HMNew HM
New AISNew HM
New AISNew HM
18 inch Mesh Jumper(E-MX8W4PTPC18)
OEM Transition KitIncludes OEM Cable,ICon and 18 Jumper
(E-HM8W4TCK)
AO2 Panel
Powerway
18 inch mesh jumper
18 inch mesh jumper
18 inch mesh jumper
OEM CableOnly
OEM TransitionKit
OEM TransitionKit
21 inch mesh jumper
AIS AO2 Electrical Jumper Connections
21 inch Mesh Jumper(E-MX8W4PTPC21)
OEM Transition Cable(E-HM8W4TC)
Old AIS/Old HM New AIS
Old AIS/Old HM New AIS
New AISNew AIS
New AISNew AIS
Old AIS/Old HMNew HM
New AISNew HM
New AISNew HM
18 inch Mesh Jumper(E-MX8W4PTPC18)
OEM Transition KitIncludes OEM Cable,ICon and 18 Jumper
(E-HM8W4TCK)
AO2 Panel
Powerway
18 inch mesh jumper
18 inch mesh jumper
18 inch mesh jumper
OEM CableOnly
OEM TransitionKit
OEM TransitionKit
21 inch mesh jumper
AIS AO2 Electrical Jumper Connections
21 inch Mesh Jumper(E-MX8W4PTPC21)
OEM Transition Cable(E-HM8W4TC)
Old AIS/Old HM New AIS
Old AIS/Old HM New AIS
New AISNew AIS
New AISNew AIS
Old AIS/Old HMNew HM
New AISNew HM
New AISNew HM
18 inch Mesh Jumper(E-MX8W4PTPC18)
OEM Transition KitIncludes OEM Cable,ICon and 18 Jumper
(E-HM8W4TCK)
AO2 Panel
Powerway
18 inch mesh jumper
18 inch mesh jumper
18 inch mesh jumper
OEM CableOnly
OEM TransitionKit
OEM TransitionKit
21 inch mesh jumper
AIS AO2 Electrical Jumper Connections
21 inch Mesh Jumper(E-MX8W4PTPC21)
OEM Transition Cable(E-HM8W4TC)
AO2
31Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
STANDARD PANEL-TO-PANEL JUMPERSL Model Number List
18 E-MX8W4PTPC18 162
21 E-MX8W4PTPC21 170
TRANSITIONAL JUMPERSType Model Number List
OEM Transition Kit E-HM8W4TCK 711
Notes
Panel-to-Panel Jumpers connect any two adjacent powered panels connected in a straight line or at a 90° angle. Order an Extended panel -to-panel jumper to connect any two powered panels across the gap created by a 3-way or 4-way connection. 90° corners and straight panel-to-panel connections do not require an extended jumper.
Notes
Lateral Pass Through Jumpers pass through a non-powered panel to connect two powered panels. Specify the jumper that corresponds to the width of the panel to be passed through. In extended pass through situations, specify the next lateral pass through jumper size in order to span the additional gap created by a 3-way or 4-way connection. 90° corners and straight panel-to-panel connections do not require an extended jumper. Specify the jumper that corresponds to the width of the panel to be passed through.
Notes
Transitional Jumpers connect any two adjacent powered panels with different versions of power connected in a straight line or at a 90° angle. See diagram on opposing page.
LATERAL PASS THROUGH JUMPERSPanel W Panel L Description Model Number List
12 37 Pass thru 12” panel E-MW8W4PJ18 216
12 Ext 37 Pass thru 12” panel extended E-MW8W4PJ18E 245
24 43 Pass thru 24” panel E-MW8W4PJ24 231
24 Ext 49 Pass thru 24” panel extended E-MW8W4PJ24E 241
30 49 Pass thru 30” panel E-MW8W4PJ30 249
30 Ext 55 Pass thru 30” panel extended E-MW8W4PJ30E 253
36 55 Pass thru 36” panel E-MW8W4PJ36 256
36 Ext 61 Pass thru 36” panel extended E-MW8W4PJ36E 261
42 61 Pass thru 42” panel E-MW8W4PJ42 264
42 Ext 67 Pass thru 42” panel extended E-MW8W4PJ42E 269
48 67 Pass thru 48” panel E-MW8W4PJ48 285
48 Ext 69 Pass thru 48” panel extended E-MW8W4PJ48E 292
60 79 Pass thru 60” panel E-MW8W4PJ60 306
60 Ext 86 Pass thru 60” panel extended E-HM8W4PJ60E 327
ELECTRICALJumpers
AO2
32Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
DUPLEX OUTLETSLine Model Number List
1 E-HM8W4OUT1 59
2 E-HM8W4OUT2 59
3 E-HM8W4OUT3 59
4 E-HM8W4OUT4 59
5 E-HM8W4OUT5 107
Notes
Duplex Outlets are available designated circuits 1 through 4. Each duplex outlet contains two single receptacles (places to plug into) of the same circuit and are specified separately from powerways. All duplex outlets have black faces. The lettering on outlets for Circuit 1, 2 and 3 is white. The lettering on outlets for Circuit 4 and 5 is orange. Outlets are screw mounted to powerway. Duplex outlets are standard 15 amp outlets.
Notes
In California, 50 percent of all outlets in a systems panel cluster or benching clus-ter, for new construction, MUST be controlled outlets, even if there is no task lighting. Customers should plan on using circuits 2 and 3 for controlled circuits, and plan general load for all other items on circuits 1 and 4. If using 2 + 2 config-uration, controlled circuits should be 1 and 2, and general load circuits on 4 and 5. Outlets must have the “controlled” symbol for identification purposes.
CALIFORNIA TITLE 24 CONTROLLED DUPLEX OUTLETSLine Model Number List
1 E-HM8W4T24D01 64
2 E-HM8W4T24D02 64
3 E-HM8W4T24D03 64
4 E-HM8W4T24D04 64
“Controlled” Symbol
Notes
USB Outlets bring USB charging options to panel power distribution systems. The USB Outlets provide convenient charging power access through dual ports on the face of the receptacle. The USB Outlets offer a total of 2 Amps between two USB charging ports. The USB Outlets are UL and FCC Part 15A approved.
USB OUTLETSLine Model Number List
1 E-UN8W4USB01 243
2 E-UN8W4USB02 243
3 E-UN8W4USB03 243
4 E-UN8W4USB04 243
DUPLEX OUTLET HOLE COVERSModel Number List
E-UNWC 22
Specify Notes
• Color Selection for Hole Cover
Duplex Outlet Hole Covers are supplied with each powered panel to cover unused duplex outlet loca-tions (six). 24”W panels only include three duplex outlet hole covers. Order extra hole covers separate-ly only when required.
ELECTRICALDuplex Outlets
AO2
33Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
RECEPTACLE MOUNTED BASE IN-FEEDSHand L Model Number ListLeft 72 E-UN8W4BIFL 392
Right 72 E-UN8W4BIFR 392
NEW YORK CITY RECEPTACLE MOUNTED BASE IN-FEEDSHand L Model Number ListLeft 72 E-HM8W4BIFLNY 762
Right 72 E-HM8W4BIFRNY 762
SIDE MOUNTED BASE IN-FEEDSL Model Number List
72 E-UN8W4BIFS 364
NEW YORK CITY SIDE MOUNTED BASE IN-FEEDSL Model Number List
72 E-HM8W4BIFSNY 727
Notes
Side Mounted Base In-Feeds provide interface with building power at the base of the panel and mounts to powerway at jumper location. Each base feed is 6’ in length, encased in “liquid tight”. New York City code requires the use of a special base feed with an in-line junction box.
Notes
Receptacle Mounted Base In-Feeds provide interface with building power and mounts to powerway at duplex outlet location. Each base in-feed is 6’ in length, encased in “liquid tight”. New York City code requires the use of a special base feed with an in-line junction box.
Notes
Receptacle Mounted Base In-Feeds provide interface with building power and mounts to powerway at duplex outlet location. Each base in-feed is 6’ in length, encased in “liquid tight”. New York City code requires the use of a special base feed with an in-line junction box.
CEILING IN-FEEDSL Model Number List
144 E-UN8W4CIF 443
Notes
Ceiling In-Feeds provide interface with building power from a suspended ceiling through a power pole shell. Each ceiling feed is 12’ long. Power pole shells are ordered separately.
Notes
New York City Side Mounted Base In-Feeds provide interface with building power and mounts to side of powerway. Each base feed is 6’ in length, encased in “liquid tight”. New York City code requires the use of a special base feed with an in-line junction box.
ELECTRICALIn-Feeds
AO2
34Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
ELECTRICAL RETROFIT KITSW Model Number List24 E-FRKHEP8424 302
30 E-FRKHEP8430 324
36 E-FRKHEP8436 337
42 E-FRKHEP8442 358
48 E-FRKHEP8448 375
60 E-FRKHEP8460 408
Specify Notes
• Color Selection for Base Cover
Electrical Retrofit Kits are for field retrofitting existing non-powered AIS AO2 panels with 8 wire, 4 circuit electrical. Kit includes one powerway and mounting screws, two powered base covers and two duplex outlet hole covers. Duplex outlets, jumpers, extra hole covers or feeds are ordered separately.
HARDWIRE JUNCTION BOXModel Number List
E-HMJBCH 232
Specify Notes
• Color Selection for Plate Covers
Hardwire Junction Box allows standard, hardwired, single gang duplex outlets to be used in AO2 pan-els at each standard, modular duplex outlet location. Each outlet will require one junction box; however, outlets can be placed back to back on a spine, with a total of two outlets total per box. Junction boxes do not include electrical connectors. Boxes are UL listed. Decora faced outlets cannot be used. Kit in-cludes all hardware required to attach box to AO2 panel at duplex outlet location. Standard AO2 pow-ered base covers are required. Order AO2 panels with Chicago base cover option. Boxes have stan-dard 0.875” knockouts for electrical connectors. Junction boxes can be used with either 15 amp or 20 amp single gang outlets.
DATA PLATE KITSItem Model Number List
6 Port Data Gang Plate E-DP6GFPB 26
CAT 5e Jack (RJ-45) E-HRJ45-SM 93
CAT 6 Data Jack E-HXJ6BK-SM 102
Hole Blank (10 PK) E-SFBB10-SM 62
Notes
Snap-In Data Housing Plate has six ports. Housing is black and snaps into stan-dard AIS AO2 duplex outlet holes, which measure 1.86” x 3.012”. RJ-45 jacks can be used in place of RJ-11 jacks.
ELECTRICALRetrofit Kits, Power/Data Pole Kits, Junction Boxes, Data Plate Kits
DOUBLE CHANNEL POWER/DATA POLE KITModel Number List Grade C PaintA-PPDCHM 555 +20
Specify Notes
• Paint Selection Double Channel Power/Data Pole Kit includes two 68” pole sections, two 68” covers, one pole coupler, two 68” dividers, four pole to panel mounting brack-ets, one ceiling shroud, one 72” length of perforat-ed metal strip for attaching pole to ceiling grid, and mounting hardware. Order ceiling feeds separately. Designed for an 11’ ceiling.
AO2
35Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
STANDARD CANTILEVERSSurface Depth
Actual Depth Hand Model Number List
Grade C Paint
24 18 Left WPS-HECT24L 73 +10
24 18 Right WPS-HECT24R 73 +10
24 18 Pair WPS-HECT24P 140 +20
30 25.5 Left WPS-CTLTL30 140 +10
30 25.5 Right WPS-CTLTR30 140 +10
30 25.5 Pair WPS-CTLT30 278 +20
Specify Notes
• Paint Selection for Can-tilevers
Standard Cantilevers provide cantilevered worksur-face support from panel or wall track at either the left or right hand side of a worksurface. All worksurface support components fasten directly to worksurfaces with screws. Standard cantilevers may also be used as a center support. Specify cantilever that corre-sponds to worksurface depth. It is highly recom-mended that flat plates are specified in conjunction with support cantilevers to splice two worksurfaces together at the front edge. Painted black as standard, all other trim colors are Grade C upcharged.
SHARED CANTILEVERSSurface Depth
Actual Depth Hand Model Number List
Grade C Paint
24 18 Left WPS-HECT24SL 106 +10
24 18 Right WPS-HECT24SR 106 +10
24 18 Pair WPS-HECT24SP 206 +20
30 25.5 Left WPS-CTLST30L 204 +10
30 25.5 Right WPS-CTLST30R 204 +10
30 25.5 Pair WPS-CTLST30P 404 +20
Specify Notes
• Paint Selection for Can-tilevers
Shared Cantilevers provide cantilevered support from panel or wall track at seam between two work-surfaces. All worksurface support components fas-ten directly to worksurfaces with screws. Specify cantilever that corresponds to worksurface depth. It is highly recommended that flat plates are speci-fied in conjunction with support cantilevers to splice two worksurfaces together at the front edge. Painted black as standard, all other trim colors are Grade C upcharged.
SIDE SUPPORT / REAR BRACKETS
Hand Model Number ListGrade C
PaintLeft WPS-SSHML 51 +10
Right WPS-SSHMR 51 +10
Pair WPS-SSHM 101 +20
Specify Notes
• Paint Selection for Side Support / Rear Bracket
Side Support/Rear Brackets provide direct support from panel or wall track along short side of rectangu-lar worksurface or at rear of corner worksurface. All worksurface support components fasten directly to worksurfaces with screws. Painted black as a stan-dard. All other trim colors are Grade C upcharged.
PANEL MOUNTED SHELF CANTILEVERSSurface Depth
Actual Depth Hand Model Number List
Grade C Paint
12 10 Left WPS-CT10PHEL 130 +10
12 10 Right WPS-CT10PHER 130 +10
12 10 Pair WPS-CT10PHE 249 +20
Specify Notes
• Paint Selection Panel Mounted Shelf Cantilevers are 10”d and de-signed to work in conjunction with 12”d worksurfac-es to create additional desk top shelving. Available for all AIS panel systems. For use with 12” to 16” worksurfaces only.
SUPPORTCantilevers and Side Support/Rear Brackets
RightLeft
AO2
36Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
STANDARD END PANELS
D Model Number ListGrade C
Laminate12 WFS-EPHM12 276 +20
18 WFS-EPHM18 324 +24
24 WFS-EPHM24 366 +27
30 WFS-EPHM30 407 +30
36 WFS-EPHM36 463 +34
Specify Notes
• Laminate Selection for End Panel
• 2mm Edge Selection for End Panel
Standard End Panels have laminated vertical surfac-es and a 2mm PVC vertical front edge. Standard end panels provide direct support from floor at left or right side of a worksurface, and engage and lock to pan-els with provided mounting brackets. All worksurface support components fasten directly to worksurfaces with screws. Specify end panel that corresponds to worksurface depth.
CLEAR ACCESS END PANELS
D Model Number ListGrade C
Laminate24 WFS-EPCAHM24 386 +29
30 WFS-EPCAHM30 431 +32
Specify Notes
• Laminate Selection for End Panel
• 2mm Edge Selection for End Panel
Clear Access End Panels have laminated vertical sur-faces and a 2mm vertical front edge. Clear access end panels provide direct support from floor at left or right side of a worksurface, and engage and lock to panels with provided mounting brackets. All worksur-face support components fasten directly to worksur-faces with screws.
Specify Notes
• Paint Selection for Count-er-top Bracket
Countertop Brackets provide direct support from 41”H panel for countertop worksurfaces. Specify at least two pair of countertop brackets for every coun-tertop (one pair for front side and one pair for rear). All worksurface support components fasten directly to worksurfaces with screws.
COUNTERTOP BRACKETS
Hand Model Number ListGrade C
PaintLeft WPS-CTBLHM 48 +10
Right WPS-CTBRHM 48 +10
Pair WPS-CTBHM 92 +20
PEDESTAL-TO-PANEL ATTACHMENT BRACKET
Model Number ListGrade C
LaminateS-HMPMPB 181 +25
Specify Notes
• Paint Selection Pedestal-to-Panel Attachment Brackets attach structural pedestals to panels. These brackets serve as a space filler and as a way to add stability to panels..Pedestal to panel attachment brackets may only be used when the nominal surface depth matches the nominal pedestal depth (24” Deep surface & 24” deep pedestal or 30” deep surface and 30” deep pedestal).
SUPPORTEnd Panels and Brackets
AO2
37Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
PANEL MOUNTED A-LEGS
H D Hand Model Number ListGrade C
Paint27 12 Left WFS-ALW2712AOL 333 +25
27 12 Left Shared WFS-ALW2712AOLS 358 +25
27 12 Right WFS-ALW2712AOR 333 +25
27 12 Right Shared WFS-ALW2712AORS 358 +25
27 12 Freestanding WFS-ALW2712FS 379 +25
27 24 Left WFS-ALW2724AOL 379 +25
27 24 Left Shared WFS-ALW2724AOLS 404 +25
27 24 Right WFS-ALW2724AOR 379 +25
27 24 Right Shared WFS-ALW2724AORS 404 +25
27 24 Freestanding WFS-ALW2724FS 403 +25
27 30 Left WFS-ALW2730AOL 404 +25
27 30 Left Shared WFS-ALW2730AOLS 429 +25
27 30 Right WFS-ALW2730AOR 404 +25
27 30 Right Shared WFS-ALW2730AORS 429 +25
27 30 Freestanding WFS-ALW2730FS 420 +25
Specify Notes
• Paint Selection A-Legs are constructed from 1” x 2” painted steel. Legs have 1 1/2” leveling glides. A-Leg welded construction allows for attachment to the worksurface. Panel attachment brackets are included and installed at the factory for panel mounted legs. Panel locking bracket for panel attachment situations ships separate. Freestanding A-Legs cannot be used as freestanding table support. One side must be anchored to a storage element or panel.
SUPPORTPanel Mounted A-Legs
Panel Mounted Left Hand Panel Mounted Left Hand Shared Panel Mounted Right Hand Panel Mounted Right Hand Shared Freestanding
AO2
38Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
Specify Notes
• Paint Selection Mid-Height Shelf Units provide low profile overhead storage. Shelf ends have locking swing cams to pre-vent dislodgement. Shelf bottom will receive task-lights. Unit includes two mid-height shelf ends, one shelf pan, and mounting hardware. Order shelf unit that corresponds to panel width.
MID-HEIGHT SHELF UNITS
H W D Model Number ListGrade C
Paint7.75 24 12 S-SHFMX24 233 +12
7.75 30 12 S-SHFMX30 241 +12
7.75 36 12 S-SHFMX36 250 +12
7.75 42 12 S-SHFMX42 264 +12
7.75 48 12 S-SHFMX48 292 +12
7.75 60 12 S-SHFMX60 308 +12
LINEAR MID-HEIGHT SHELF UNITS
H W D Model Number ListGrade C
Paint7.75 24 12 S-SHFLMX24 229 +12
7.75 30 12 S-SHFLMX30 238 +12
7.75 36 12 S-SHFLMX36 247 +12
7.75 42 12 S-SHFLMX42 260 +12
7.75 48 12 S-SHFLMX48 286 +12
7.75 60 12 S-SHFLMX60 305 +12
Specify Notes
• Paint Selection Linear Mid-Height Shelf Units provide low profile overhead storage. Shelf ends have locking swing cams to prevent dislodgement. Shelf bottom will re-ceive tasklights. Unit includes two Linear Mid-height shelf ends, one shelf pan, and mounting hardware. Order shelf unit that corresponds to panel width.
SHELF DIVIDERSModel Number List Grade C PaintS-SHFDIV12 105 +10
Specify Notes
• Paint Selection Shelf Divider mounts to mid-height shelf decks and may also be used inside of complete flipper bins. No hardware necessary. Divider snaps into place. Divid-er is 5 5/8” tall and designed to finish at the same height as a mid-height shelf end.
STORAGEMid-Height Shelf Units
AO2
39Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
MID-HEIGHT CORNER SHELF UNITS
H WCenter
DWing
D Model Number ListGrade C
Paint7.75 36 30.5 12 S-SHFCMX36 967 +25
7.75 42 30.5 12 S-SHFCMX42 1,070 +25
7.75 48 30.5 12 S-SHFCMX48 1,306 +25
Specify Notes
• Paint Selection Mid-Height Corner Shelf Units provide low profile overhead storage in corner above corner worksur-faces. Shelf ends have locking swing cams to pre-vent dislodgement. Shelf has lateral strength bar welded parallel to front edge which will receive a 36” or smaller tasklight parallel to front edge. All shelves 33 5/8” across front edge and are 30 1/2” deep front to back corner. Back corner has 3 1/2” x 3 1/2” cut-out to facilitate cable management. 42” and 48” units have 6” and 12” wings respectively. Unit includes two mid-height shelf ends, one bottom shelf pan, two corner shelf back mounting brackets, and mounting hardware. Order shelf unit that corresponds to panel width.
LINEAR MID-HEIGHT CORNER SHELF UNITS
H WCenter
DWing
D Model Number ListGrade C
Paint7.75 36 30.5 12 S-SHFLCMX36 973 +25
7.75 42 30.5 12 S-SHFLCMX42 1,037 +25
7.75 48 30.5 12 S-SHFLCMX48 1,459 +25
Specify Notes
• Paint Selection Linear Mid-Height Corner Shelf Units provide low profile overhead storage in corner above corner worksurfaces. Shelf ends have locking swing cams to prevent dislodgement. Shelf has lateral strength bar welded parallel to front edge which will receive a 36” or smaller tasklight parallel to front edge. All shelves 33 5/8” across front edge and are 30 1/2” deep front to back corner. Back corner has 3 1/2” x 3 1/2” cutout to facilitate cable management. 42” and 48” units have 6” and 12” wings respectively. Unit in-cludes two Linear Mid-height shelf ends, one bottom shelf pan, two corner shelf back mounting brackets, and mounting hardware. Order shelf unit that corre-sponds to panel width.
SHELF DIVIDERSModel Number List Grade C PaintS-SHFDIV12 105 +10
Specify Notes
• Paint Selection Shelf Divider mounts to mid-height shelf decks and may also be used inside of complete flipper bins. No hardware necessary. Divider snaps into place. Divid-er is 5 5/8” tall and designed to finish at the same height as a mid-height shelf end.
STORAGEMid-Height Corner Shelf Units
AO2
40Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
METAL / FABRIC DOOR FRONT TYPE C FLIPPER DOOR UNITSInterior
H WInterior
D Model Number ListGrade C
PaintC.O.MFabric
Grade CFabric
Grade DFabric
EasyDown
14.25 24 12 S-FDUMX24 603 +20 -5 +13 +24 +215
14.25 30 12 S-FDUMX30 615 +20 -5 +13 +24 +215
14.25 36 12 S-FDUMX36 635 +20 -5 +13 +24 +215
14.25 42 12 S-FDUMX42 648 +20 -5 +13 +24 +215
14.25 48 12 S-FDUMX48 690 +20 -5 +13 +24 +215
14.25 60 12 S-FDUMX60 838 +20 -5 +13 +24 +215
LAMINATE DOOR FRONT TYPE C FLIPPER DOOR UNITSInterior
H WInterior
D Model Number ListGrade C
PaintGrade C
LaminateEasyDown
14.25 24 12 S-FDUMX24L 747 +20 +17 +215
14.25 30 12 S-FDUMX30L 761 +20 +18 +215
14.25 36 12 S-FDUMX36L 779 +20 +19 +215
14.25 42 12 S-FDUMX42L 796 +20 +20 +215
14.25 48 12 S-FDUMX48L 885 +20 +21 +215
14.25 60 12 S-FDUMX60L 982 +20 +22 +215
Easy Down Mechanism (Optional)
Specify Notes
• Paint Selection• Paint or Fabric for Flipper Door Style• Fabric Selection for Flipper Selection (if applicable)
• Easy Down Mechanism (optional)
Type C Flipper Door Unit - Metal/Fabric Door Front provides binder height, lockable overhead storage. Door opens and stores above top cover pan. Flipper unit has an open back. Shelf ends have locking swing cams to prevent dislodgement. Shelf bot-tom will receive tasklights. Easy Down Mechanisms are optional for all sizes and recommended on 60” wide units. All flipper doors are lockable with two supplied keys. Lock cores are removable with removal keys and master keys are available. Extra lock cores are available for keying flipper doors alike, but flipper doors may not be ordered without locks. Keying flippers alike requires removal of pre-installed lock cores and installation of keyed alike cores in the field. Order flipper unit that corresponds to panel width. See “Accessories” for ordering replacement keys, master keys, core removal keys, additional keys cores for keying alike or replacement uses.
Specify Notes
• Paint Selection• Laminate Selection for Flipper Door• Edge Selection for Flipper Door• Easy Down Mechanism (optional)
Type C Flipper Door Unit - Laminate Door Front provides binder height, lockable overhead storage. Door opens and stores above top cover pan. Flipper unit has an open back. Shelf ends have locking swing cams to prevent dislodgement. Shelf bot-tom will receive tasklights. Easy Down Mechanisms are optional for all sizes and recommended on 60” wide units. All flipper doors are lockable with two supplied keys. Lock cores are removable with removal keys and master keys are available. Extra lock cores are available for keying flipper doors alike, but flipper doors may not be ordered without locks. Keying flippers alike requires removal of pre-installed lock cores and installation of keyed alike cores in the field. Order flipper unit that corresponds to panel width. See “Accessories” for ordering replacement keys, master keys, core removal keys, additional keys cores for keying alike or replacement uses.
Easy Down Mechanism (Optional)
STORAGEType C Flipper Door Units
AO2
41Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
METAL / FABRIC DOOR FRONT TYPE C RAISED FLIPPER DOOR UNITSInterior
H WInterior
D Model Number ListGrade C
PaintC.O.MFabric
Grade CFabric
Grade DFabric
PerfBack
EasyDown
14.25 24 12 S-FDURFMX24 1,227 +20 -5 +13 +24 +35 +215
14.25 30 12 S-FDURFMX30 1,255 +20 -5 +13 +24 +35 +215
14.25 36 12 S-FDURFMX36 1,285 +20 -5 +13 +24 +35 +215
14.25 42 12 S-FDURFMX42 1,322 +20 -5 +13 +24 +35 +215
14.25 48 12 S-FDURFMX48 1,393 +20 -5 +13 +24 +35 +215
14.25 60 12 S-FDURFMX60 1,573 +20 -5 +13 +24 +35 +215
Easy Down Mechanism (Optional)
Specify Notes
• Paint Selection• Paint or Fabric for Flipper Door Style• Fabric Selection for Flipper Selection (if applicable)
• Metal or Perforated Back Panel Style• Easy Down Mechanism (optional)
Type C Raised Flipper Door Unit - Metal/Fabric Door Front provides binder height, lockable overhead storage. When mounted on 53” high panels, unit rests level with a standard flipper door unit mounted at the top of a 65” high panel. Door opens and stores above top cover pan. Backside of unit is completely enclosed providing added security. Shelf ends have locking swing cams to prevent dislodgement. Shelf bottom will receive tasklights. Easy down mechanisms are optional for all sizes and rec-ommended on 60” wide units. All flipper doors are lockable with two supplied keys. Lock cores are removable with removal keys and master keys are available. Extra lock cores are available for keying flipper doors alike, but flipper doors may not be ordered without locks. Keying flippers alike requires removal of pre-installed lock cores and installation of keyed alike cores in the field. Order flipper unit that corresponds to panel width. See “Accessories” for ordering replacement keys, master keys, core removal keys, additional keys cores for keying alike or replacement uses.
LAMINATE DOOR FRONT TYPE C RAISED FLIPPER DOOR UNITSInterior
H WInterior
D Model Number ListGrade C
PaintGrade C
LaminatePerfBack
EasyDown
14.25 24 12 S-FDURFMX24L 1,374 +20 +17 +35 +215
14.25 30 12 S-FDURFMX30L 1,401 +20 +18 +35 +215
14.25 36 12 S-FDURFMX36L 1,429 +20 +19 +35 +215
14.25 42 12 S-FDURFMX42L 1,469 +20 +20 +35 +215
14.25 48 12 S-FDURFMX48L 1,590 +20 +21 +35 +215
14.25 60 12 S-FDURFMX60L 1,723 +20 +22 +35 +215
Specify Notes
• Paint Selection• Laminate Selection for Flipper Door• Edge Selection for Flipper Door• Metal or Perforated Back Panel Style• Easy Down Mechanism (optional)
Type C Raised Flipper Door Unit - Laminate Door Front provides binder height, lockable overhead storage. When mounted on 53” high panels, unit rests level with a standard flipper door unit mounted at the top of a 65” high panel. Door opens and stores above top cover pan. Backside of unit is completely enclosed providing added security. Shelf ends have locking swing cams to prevent dislodgement. Shelf bottom will receive tasklights. Easy down mechanisms are optional for all sizes and rec-ommended on 60” wide units. All flipper doors are lockable with two supplied keys. Lock cores are removable with removal keys and master keys are available. Extra lock cores are available for keying flipper doors alike, but flipper doors may not be ordered without locks. Keying flippers alike requires removal of pre-installed lock cores and installation of keyed alike cores in the field. Order flipper unit that corresponds to panel width. See “Accessories” for ordering replacement keys, master keys, core removal keys, additional keys cores for keying alike or replacement uses.
Easy Down Mechanism (Optional)
STORAGEType C Raised Flipper Door Units
AO2
42Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
SOLID METAL DOOR FRONT TYPE D FLIPPER DOOR UNITSInterior
H WInterior
D Model Number ListGrade C
PaintEasyDown
14.25 24 12 S-FDDSMX24 733 +20 +215
14.25 30 12 S-FDDSMX30 750 +20 +215
14.25 36 12 S-FDDSMX36 766 +20 +215
14.25 42 12 S-FDDSMX42 782 +20 +215
14.25 48 12 S-FDDSMX48 821 +20 +215
Easy Down Mechanism (Optional)
Specify Notes
• Paint Selection• Easy Down Mechanism (optional)
Type D Flipper Door Unit - Solid Metal Door Front provides binder height, lockable overhead storage. Door opens and stores above top cover pan. Flipper unit has an open back. Shelf ends have locking swing cams to prevent dislodgement. Shelf bot-tom will receive tasklights. Easy down mechanisms are optional for all sizes and recommended on 60” wide units. All flipper doors are lockable with two supplied keys. Lock cores are removable with removal keys and master keys are available. Extra lock cores are available for keying flipper doors alike, but flipper doors may not be ordered without locks. Keying flippers alike requires removal of pre-installed lock cores and installation of keyed alike cores in the field. Order flipper unit that corresponds to panel width. See “Accessories” for ordering replacement keys, master keys, core removal keys, additional key cores for keying alike or replacement uses.
Easy Down Mechanism (Optional)
Specify Notes
• Paint Selection• Metal or Perforated Back Panel Style• Easy Down Mechanism (optional)
Type D Raised Flipper Door Unit - Solid Metal Door Front provides binder height, lockable overhead storage. When mounted on 53” high panels, unit rests level with a standard flipper door unit mounted at the top of a 65” high panel. Door opens and stores above top cover pan. Backside of unit is completely enclosed providing added security. Shelf ends have locking swing cams to prevent dislodgement. Shelf bottom will receive tasklights. Easy down mechanisms are optional for all sizes and rec-ommended on 60” wide units. All flipper doors are lockable with two supplied keys. Lock cores are removable with removal keys and master keys are available. Extra lock cores are available for keying flipper doors alike, but flipper doors may not be ordered without locks. Keying flippers alike requires removal of pre-installed lock cores and installation of keyed alike cores in the field. Order flipper unit that corresponds to panel width. See “Accessories” for ordering replacement keys, master keys, core removal keys, additional key cores for keying alike or replacement uses.
SOLID METAL DOOR FRONT TYPE D RAISED FLIPPER DOOR UNITSInterior
H WInterior
D Model Number ListGrade C
PaintPerfBack
EasyDown
14.25 24 12 S-FDDRMX24 1,360 +20 +35 +215
14.25 30 12 S-FDDRMX30 1,388 +20 +35 +215
14.25 36 12 S-FDDRMX36 1,419 +20 +35 +215
14.25 42 12 S-FDDRMX42 1,456 +20 +35 +215
14.25 48 12 S-FDDRMX48 1,527 +20 +35 +215
STORAGEType D Flipper and Raised Flipper Door Units
AO2
43Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
STORAGESliding Door Units
METAL DOOR FRONT SLIDING DOOR UNITS
H W D Model Number ListGrade C
Paint14.25 30 12 S-MS2DOMX30 738 +20
14.25 36 12 S-MS2DOMX36 757 +20
14.25 42 12 S-MS2DOMX42 772 +20
14.25 48 12 S-MS2DOMX48 813 +20
14.25 60 12 S-MS2DOMX60 956 +20
LAMINATE DOOR FRONT SLIDING DOOR UNITS
H W D Model Number ListGrade C
PaintGrade C
Laminate14.25 30 12 S-MS2DOMX30L 882 +20 +18
14.25 36 12 S-MS2DOMX36L 900 +20 +19
14.25 42 12 S-MS2DOMX42L 916 +20 +20
14.25 48 12 S-MS2DOMX48L 1,005 +20 +21
14.25 60 12 S-MS2DOMX60L 1,100 +20 +22
Specify Notes
• Paint Selection Sliding Door Unit - Metal Door Front provides binder height, lockable overhead storage. Door slides open side to side. Sliding door unit has an open back. Shelf ends have locking swing cams to prevent dislodge-ment. Shelf bottom will receive tasklights. All slid-ing doors are lockable with (2) keys supplied. Lock cores are removable with removal keys and master keys are available. Extra lock cores are available for keying sliding doors alike, but sliding doors may not be ordered without locks. Keying sliding doors alike requires removal of pre-installed lock cores and in-stallation of keyed alike cores in the field. See “Ac-cessories” for shelf, flipper and key accessories.
Specify Notes
• Paint Selection• Laminate Selection for Sliding Door
• Edge Selection for Sliding Door
Sliding Door Unit - Laminate Door Front provides binder height, lockable overhead storage. Door slides open side to side. Sliding door unit has an open back. Shelf ends have locking swing cams to prevent dislodgement. Shelf bottom will receive tasklights. All sliding doors are lockable with (2) keys supplied. Lock cores are removable with removal keys and master keys are available. Extra lock cores are available for keying sliding doors alike, but slid-ing doors may not be ordered without locks. Keying sliding doors alike requires removal of pre-installed lock cores and installation of keyed alike cores in the field. See “Accessories” for shelf, flipper and key ac-cessories.
AO2
44Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
STORAGERaised Sliding Door Units
Specify Notes
• Paint Selection Type C Raised Sliding Door Unit - Metal Door Front provides binder height, lockable overhead storage. When mounted on 50” high panels, unit rests level with a standard flipper door unit mounted at the top of a 66” high panel. Door slides open side to side. Backside of unit is completely enclosed providing added security. Shelf ends have locking swing cams to prevent dislodgement. Shelf bottom will receive tasklights. All sliding doors are lockable with (2) keys supplied. Lock cores are removable with removal keys and master keys are available. Extra lock cores are available for keying sliding doors alike, but slid-ing doors may not be ordered without locks. Keying sliding doors alike requires removal of pre-installed lock cores and installation of keyed alike cores in the field. See “Accessories” for shelf, flipper and key ac-cessories.
Specify Notes
• Paint Selection• Laminate Selection for Sliding Door
• Edge Selection for Sliding Door
Type C Raised Sliding Door Unit - Laminate Door Front provides binder height, lockable overhead storage. When mounted on 50” high panels, unit rests level with a standard flipper door unit mount-ed at the top of a 66” high panel. Door slides open side to side. Backside of unit is completely enclosed providing added security. Shelf ends have locking swing cams to prevent dislodgement. Shelf bottom will receive tasklights. All sliding doors are lockable with (2) keys supplied. Lock cores are removable with removal keys and master keys are available. Ex-tra lock cores are available for keying sliding doors alike, but sliding doors may not be ordered without locks. Keying sliding doors alike requires removal of pre-installed lock cores and installation of keyed alike cores in the field. See “Accessories” for shelf, flipper and key accessories.
METAL DOOR FRONT RAISED SLIDING DOOR UNITS
H W D Model Number ListGrade C
PaintPerforated
Back14.25 30 12 S-RMS2DOMX30 1,389 +20 +35
14.25 36 12 S-RMS2DOMX36 1,421 +20 +35
14.25 42 12 S-RMS2DOMX42 1,457 +20 +35
14.25 48 12 S-RMS2DOMX48 1,528 +20 +35
14.25 60 12 S-RMS2DOMX60 1,707 +20 +35
LAMINATE DOOR FRONT RAISED SLIDING DOOR UNITS
H W D Model Number ListGrade C
PaintGrade C
LaminatePerforated
Back14.25 30 12 S-RMS2DOMX30L 1,533 +20 +18 +35
14.25 36 12 S-RMS2DOMX36L 1,564 +20 +19 +35
14.25 42 12 S-RMS2DOMX42L 1,601 +20 +20 +35
14.25 48 12 S-RMS2DOMX48L 1,725 +20 +21 +35
14.25 60 12 S-RMS2DOMX60L 1,855 +20 +22 +35
AO2
45Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
STORAGECabinet Door Units
METAL DOOR FRONT CABINET DOOR UNITS
H W D Model Number ListGrade C
Paint14.25 24 12 S-VDOMX24 997 +20
14.25 30 12 S-VDOMX30 1,012 +20
14.25 36 12 S-VDOMX36 1,029 +20
14.25 42 12 S-VDOMX42 1,045 +20
14.25 48 12 S-VDOMX48 1,087 +20
Specify Notes
• Paint Selection Cabinet Door Unit - Metal Door Front provides bind-er height, lockable overhead storage. Doors swing open. Cabinet door unit has an open back. Shelf ends have locking swing cams to prevent dislodgement. Shelf bottom will receive tasklights. Units are lock-able with (2) keys supplied. Lock cores are removable with removal keys and master keys are available. Ex-tra lock cores are available for keying sliding doors alike, but sliding doors may not be ordered without locks. Keying sliding doors alike requires removal of pre-installed lock cores and installation of keyed alike cores in the field. See “Accessories” for shelf, flipper and key accessories.
Specify Notes
• Paint Selection• Laminate Selection for Cabinet Door
• Edge Selection for Cabi-net Door
Cabinet Door Unit - Laminate Door Front provides binder height, lockable overhead storage. Doors swing open. Cabinet door unit has an open back. Shelf ends have locking swing cams to prevent dis-lodgement. Shelf bottom will receive tasklights. Units are lockable with (2) keys supplied. Lock cores are removable with removal keys and master keys are available. Extra lock cores are available for keying sliding doors alike, but sliding doors may not be ordered without locks. Keying sliding doors alike re-quires removal of pre-installed lock cores and instal-lation of keyed alike cores in the field. See “Accesso-ries” for shelf, flipper and key accessories.
LAMINATE DOOR FRONT CABINET DOOR UNITS
H W D Model Number ListGrade C
PaintPerforated
Back14.25 24 12 S-VDOMX24L 1,142 +20 +17
14.25 30 12 S-VDOMX30L 1,159 +20 +18
14.25 36 12 S-VDOMX36L 1,173 +20 +19
14.25 42 12 S-VDOMX42L 1,193 +20 +20
14.25 48 12 S-VDOMX48L 1,281 +20 +21
AO2
46Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
METAL DOOR FRONT RAISED CABINET DOOR UNITS
H W D Model Number ListGrade C
PaintPerforated
Back14.25 24 12 S-RVDOMX24 1,601 +20 +35
14.25 30 12 S-RVDOMX30 1,629 +20 +35
14.25 36 12 S-RVDOMX36 1,660 +20 +35
14.25 42 12 S-RVDOMX42 1,696 +20 +35
14.25 48 12 S-RVDOMX48 1,764 +20 +35
Specify Notes
• Paint Selection Raised Cabinet Door Unit - Metal Door Front pro-vides binder height, lockable overhead storage. Doors swing open. Cabinet door unit has an open back. Shelf ends have locking swing cams to pre-vent dislodgement. Shelf bottom will receive task-lights. Units are lockable with (2) keys supplied. Lock cores are removable with removal keys and master keys are available. Extra lock cores are available for keying sliding doors alike, but sliding doors may not be ordered without locks. Keying sliding doors alike requires removal of pre-installed lock cores and in-stallation of keyed alike cores in the field. See “Ac-cessories” for shelf, flipper and key accessories.
LAMINATE DOOR FRONT RAISED CABINET DOOR UNITS
H W D Model Number ListGrade C
PaintGrade C
LaminatePerforated
Back14.25 24 12 S-RVDOMX24L 1,744 +20 +17 +35
14.25 30 12 S-RVDOMX30L 1,770 +20 +18 +35
14.25 36 12 S-RVDOMX36L 1,801 +20 +19 +35
14.25 42 12 S-RVDOMX42L 1,839 +20 +20 +35
14.25 48 12 S-RVDOMX48L 1,959 +20 +21 +35
Specify Notes
• Paint Selection• Laminate Selection for Cabinet Door
• Edge Selection for Cabinet Door
Raised Cabinet Door Unit - Laminate Door Front provides binder height, lockable overhead storage. Doors swing open. Cabinet door unit has an open back. Shelf ends have locking swing cams to pre-vent dislodgement. Shelf bottom will receive task-lights. Units are lockable with (2) keys supplied. Lock cores are removable with removal keys and master keys are available. Extra lock cores are available for keying sliding doors alike, but sliding doors may not be ordered without locks. Keying sliding doors alike requires removal of pre-installed lock cores and in-stallation of keyed alike cores in the field. See “Ac-cessories” for shelf, flipper and key accessories.
STORAGERaised Cabinet Door Units
AO2
47Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
TACKBOARDS
H W Model Number ListC.O.M Fabric
Grade C Fabric
Grade D Fabric
12 24 A-TACKHE1224 196 -5 +13 +24
12 30 A-TACKHE1230 206 -5 +13 +24
12 36 A-TACKHE1236 216 -5 +13 +24
12 42 A-TACKHE1242 227 -5 +13 +24
12 48 A-TACKHE1248 242 -5 +13 +24
12 60 A-TACKHE1260 315 -5 +13 +24
15 24 A-TACKHE1524 199 -5 +13 +24
15 30 A-TACKHE1530 212 -5 +13 +24
15 36 A-TACKHE1536 219 -5 +13 +24
15 42 A-TACKHE1542 234 -5 +13 +24
15 48 A-TACKHE1548 246 -5 +13 +24
15 60 A-TACKHE1560 323 -5 +13 +24
19 24 A-TACKHE1924 254 -5 +13 +24
19 30 A-TACKHE1930 271 -5 +13 +24
19 36 A-TACKHE1936 283 -5 +13 +24
19 42 A-TACKHE1942 299 -5 +13 +24
19 48 A-TACKHE1948 315 -5 +13 +24
19 60 A-TACKHE1960 338 -5 +13 +24
Specify Notes
• Fabric Selection Tackboards are 7/8” thick and mount to wall track to provide vertical tackable surface for wall track appli-cations and private offices. Tackboards are available in three different heights.
Specify Notes
• Paint Selection Tool Rail Kits mount to wall track or panel and ac-commodate paper flow elements. Tool rail kits are painted black as a standard. All other trim colors are Grade C upcharged.
TOOL RAIL KITS
H W Model Number ListGrade C
Paint3.375 24 A-TBHM24 268 +20
3.375 30 A-TBHM30 293 +20
3.375 36 A-TBHM36 324 +20
3.375 42 A-TBHM42 345 +20
3.375 48 A-TBHM48 363 +20
3.375 60 A-TBHM60 536 +20
PANEL COAT HOOKSModel Number List Grade C Paint
A-CHM 52 +5
Specify Notes
• Paint Selection Panel Coat Hook mounts over top of panel and is available in all standard panel colors.
ACCSESSORIESTackboards, Tool Rail Kits and Panel Coat Hooks
AO2
48Electronic Libraries available at 2020.net and ProjectMatrix.com
Phone: 800.434.7400 Fax: 978.562.0811 Web: www.ais-inc.comRevision Feb 2020© 2020, AIS, Inc.
FRAMELESS WHITEBOARDS WITH MARKER TRAY
H W Model Number List24 24 A-FWBHM2424 421
24 30 A-FWBHM2430 393
24 36 A-FWBHM2436 440
24 42 A-FWBHM2442 489
24 48 A-FWBHM2448 505
24 60 A-FWBHM2460 593
30 24 A-FWBHM3024 370
30 30 A-FWBHM3030 426
30 36 A-FWBHM3036 482
30 42 A-FWBHM3042 537
30 48 A-FWBHM3048 593
30 60 A-FWBHM3060 705
Notes
Frameless White Boards with Markey Tray is a .6” thick laminated white board with 1mm white edgeband on all sides. Frameless White Boards mount to panels with standard brackets (included). Marker Tray is included and available in black only. Marker Tray is field installed.
WHITE BOARDS WITH MARKER TRAY
H W Model Number ListGrade C
Paint24 24 A-WBHM2424 463 +15
24 30 A-WBHM2430 484 +15
24 36 A-WBHM2436 508 +15
24 42 A-WBHM2442 531 +15
24 48 A-WBHM2448 582 +15
24 60 A-WBHM2460 712 +15
30 24 A-WBHM3024 484 +15
30 30 A-WBHM3030 515 +15
30 36 A-WBHM3036 546 +15
30 42 A-WBHM3042 601 +15
30 48 A-WBHM3048 633 +15
30 60 A-WBHM3060 781 +15
Specify Notes
• Paint Selection for White-board
White Boards mount to panels with standard brack-ets. Marker Tray is included and available in black only. Marker Tray is field installed.
ACCESSORIESWhiteboards
AO2
National Showrooms:
LeominsterAIS Headquarters25 Tucker DriveLeominster, MA 01453
For additional information on AIS:Dealer Showrooms, Representative Directory, Project Case Studies, Online Catalog & Product Showcase Visit: www.ais-inc.com
New YorkAIS New York257 Park Avenue SouthNew York, New York 10010
Washington, D.C.AIS Washington, D.C.1400 I St, NW, Suite 750Washington, D.C. 20005
ChicagoThe Merchandise MartSuite 1086Chicago, Illinois 60654
GSA SalesGSA Contract GS-29F-0006KFSC Group 71, Part 1 Office Furniture
800.434.7400 | 978.562.7500 | Fax: 978.562.0811 | www.ais-inc.com | February 2020