Featuring fabrics from the Deep Deep Sea collection by · Featuring fabrics from the Deep Deep Sea...

6
www.studioefabrics.com Quilt design by Heidi Pridemore for Studioe Fabrics® Finished Quilt Size: 70" x 88" Featuring fabrics from the Deep Deep Sea collection by

Transcript of Featuring fabrics from the Deep Deep Sea collection by · Featuring fabrics from the Deep Deep Sea...

www.studioefabrics.com

Deep Sea Adventure

Quilt design by Heidi Pridemore for Studioe Fabrics®Finished Quilt Size: 70" x 88"

Featuring fabrics from the Deep Deep Sea collection by

www.studioefabrics.com•STUDIO e PROJECTS• Page 2 of 6

MaterialsCuttingDeep Deep Sea

1482-Blue 1 ½ Yards1481-Blue 1 ¼ Yards 1479-Royal ½ Yard1479-Green ¾ Yard1481-White 1 Yard1478-Blue 2 ¾ Yards1480-Royal 2 Yards (includes binding) Backing fabric 5 ½ YardsFusible web 1 Yard(18" wide)

Just Color! 1351-Grape ¼ Yard1351-Orchid ¼ Yard

1482-Blue (Blue Bubbles)

1480-Royal (Dark Blue Words)

Cut 6 - 2 ½" x 8 ½" rectanglesCut 6 - 2 ½" x 6 ½" rectanglesCut 12 - 2 ½" x 5 ½" rectanglesCut 6 - 2 ½" x 4 ½" rectanglesCut 24 - 2 ½" x 2 ½" squaresCut 12 - 2" x 16 ½" stripsCut 12 - 2" x 2 ½" rectanglesCut 6 - 2" x 2" squaresCut 6 - 1 ½" x 7 ½" rectanglesCut 6 - 1 ½" x 6 ½" rectanglesCut 6 - 1 ½" x 1 ½" squares

Cut 6 - 7 ½" x 14 ½" stripsCut 6 - 2 ½" x 5 ½" rectanglesCut 6 - 2 ½" x 3 ½" rectanglesCut 12 - 2 ½" x 2 ½" squaresCut 6 - 1 ½" x 3 ½" strips Cut 7 - 2 ½" x 42" strips (Piece the strips together to make two 2 ½" x 72 ½" strips and two 2 ½" x 58 ½" strips for the inner borders.)Cut 8 - 2 ½" x 42" strips (binding)

Cut 3 - 6 ½" x 42" strips (Piece the strips together to make two 6 ½" x 58 ½" strips for the top and bottom outer borders.Cut 2 - 6 ½" x 76 ½" strips from the length of fabric for the side outer borders.Cut 6 - 6 ½" x 6 ½" squaresNOTE: Directional fabric design

1 ½ yards

2 yards 1478-Blue (Blue Allover) 2 ¾ yards

www.studioefabrics.com•STUDIO e PROJECTS• Page 3 of 6

1481-Blue (Blue Little Fish)

Cut 48 - 3 ½" x 3 ½" squaresCut 12 - 2" x 18 ½" strips for the top and bottom block bordersCut 12 - 1 ½" x 15 ½" strips for the side block bordersNOTE: Directional fabric design

1 ¼ yards

1479-Royal (Blue Octopus)

Cut 12 - 6 ½" x 6 ½" squares

½ Yard

1351-Grape (Just Color)

Cut 18 - Window frames using circle template (see instructions)

¼ Yard 1351-Orchid (Just Color)

Cut 18 - Windows using circle template (see instructions)

¼ Yard

1479-Green (Lime Octopus)

Cut 16 - 6 ½" x 6 ½" squares

¾ Yard

1481-White (White Little Fish)

Cut 24 - 6 ½" x 6 ½" squares

1 Yard

www.studioefabrics.com•STUDIO e PROJECTS• Page 4 of 6

9-Patch Block Assembly 1. Place one 3 ½" Blue Little Fish square to the top left corner of one 6 ½" White Little Fish square, right sides together. Sew across the diagonal of the smaller square from the upper right corner to the lower left corner (Figure 1). Flip open the triangle formed, and press (Figure 2). Trim away the excess fabric from behind the triangle ¼" away from the sewn seam.

2. Follow Figure 3 for the seam direction to add another 3 ½" Blue Little Fish square to the upper right corner of the 6 ½"White Little Fish square to make the top unit (Figure 4). Repeat to make six top units.

3. Follow Figure 5 for seam direction and repeat Steps 1 and 2 to make six left side units.

4. Follow Figure 6 for seam direction and repeat Steps 1 and 2 to make six right side units.

5. Follow Figure 7 for seam direction and repeat Steps 1 and 2 to make six bottom units.

6. Sew one 6 ½" Blue Octopus square to the left side of one top unit. Sew one 6 ½" Lime Octopus square to the right side of the top unit (Figure 8). Follow the arrows for pressing to make the 9-patch top row. Repeat to make six top rows.

7. Sew one 6 ½" left unit to the left side of 6 ½" Blue Allover square. Sew one 6 ½" right unit to the right side of the Blue Allover square (Figure 9). Follow the arrows for pressing to make the 9-patch middle row. Repeat to make six middle rows.

8. Sew one 6-1/2" Lime Octopus square to the left side of one bottom unit. Sew one 6 ½" Blue Octopus square to the right side of the bottom unit (Figure 10). Follow the arrows for pressing to make the 9-patch bottom row. Repeat to make six bottom rows.

9. Sew together one of each, top row, middle row and bottom row to make one 9-patch block to measure 18 ½" (Figure 11). Repeat to make six 9-patch blocks total.

Submarine Block Assembly10. Sew one 2 ½" x 5 ½" Blue Bubbles strip to the left short side of one 2 ½" x 5 ½"Dark Blue Words strip. Sew one 2 ½" x 6 ½" Blue Bubbles strip to the right side of the 2 ½" x 5 ½" Dark Blue Words (Figure 12). Press following the arrows.

11. Sew one 1 ½" x 6 ½" Blue Bubbles strip to the left short side of one 1 ½" x 3 ½"Dark Blue Words strip. Sew one 1 ½" x 7 ½" Blue Bubbles strip to the right side of the 1 ½" x 3 ½" Dark Blue Words (Figure 13). Press following the arrows.

12. Sew the 2 ½" section to the bottom of the 1 ½" section. Sew one 2" x 16 ½" Blue Bubbles to the top of the 1 ½" section to make the Submarine top row (Figure 14). Repeat to make six of top row.

(1)

(8) (9) (10)

(11)

(12) (13) (14)

(2) (3) (4) (5) (6) (7)

Make 6 Make 6 Make 6

Make 6 Make 6 Make 6

Make 6

Make 6

SewingRead all instructions before beginning. Sew RST and use ¼" seam allowance. Block size is 18 ½".

www.studioefabrics.com•STUDIO e PROJECTS•

13. Place one 2 ½" Blue Bubbles square to the top left corner of one 7 ½" x 14 ½" Dark Blue Words strip right sides together. Sew across the diagonal of the smaller square from the upper right corner to the lower left corner (Figure 15). Flip open the triangle formed and press (Figure 16). Trim away the excess fabric from behind the triangle ¼" away from the sewn seam.

14. Follow Figure 17 for seam direction to add another 2 ½" Blue Bubbles square to each of the remaining corners to makeone Submarine Body Unit. Repeat to make six Submarine Body Units.

15. Following the manufacturer's instructions, trace eighteen window frames (3" circle) and eighteen windows (2 ½" circle) onto the paper side of the fusible web. Roughly cut out the shapes outside the drawn lines. Press the eighteen window frames onto the wrong side of the Grape fabric. Press the eighteen windows onto the Orchid fabric. Remove paper.

16. Cut out each shape on the drawn lines. Position and press three window frames and three windows to the center of each of the submarine bodies (Figure 18).

17. Stitch around the raw edges of each appliqué shape with a decorative stitch, such as a but-tonhole or satin stitch.

18. Place one 2 ½" Dark Blue Words square on the left side of one 2 ½" x 4 ½" Blue Bubbles strip, right sides together. Sew across the diagonal of the square from the upper right corner to the lower left corner (Figure 19). Flip open the triangle formed and press (Figure 20). Trim away the excess fabric from behind the triangle leaving a ¼" seam allowance.

19. Place another 2½" Dark Blue Words square on the right side of the 2 ½" x 4 ½" Blue Bubbles strip, right sides together. Sew across the diagonal of the square from the upper left corner to the lower right corner (Figure 21). Flip open the triangle formed and press (Figure 22). Trim away the excess fabric from behind the triangle leaving a ¼" seam allowanceto make one flying geese unit. Repeat to make six flying geese.

20. Sew one 2" x 2 ½" Blue Bubbles strip to each side of the flying geese to make the Submarine propeller (Figure 23). Repeat to make six submarine propeller units.

21. Sew one submarine propeller unit to the right side of the each submarine body unit to make the submarine middle row (Figure 24). Repeat to make six of the middle row.

22. Place one 2" Blue Bubbles square on the left side of one 2 ½" x 3 ½" Dark Blue Words strip, right sides together. Sew across the diagonal of the square from the upper right corner to the lower left corner (Figure 25). Flip open the triangle formed and press (Figure 26). Trim away the excess fabric from behind the triangle leaving a ¼" seam allowance.

23. Place one 1 ½" Blue Bubbles square on the right side of the 2 ½" x 3 ½" Dark Blue Words strip, right sides together. Sew across the diagonal of the square from the upper left corner to the lower right corner (Figure 27). Flip open the triangle formed, and press (Figure 28). Trim away the excess fabric from behind the triangle leaving a ¼" seam allowance to make one flying geese unit. Repeat to make six flying geese.

24. Sew one 2 ½" x 8 ½" Blue Bubble strip to the left side of one flying geese from Step 23. Sew one 2 ½" x 5 ½" Blue Bubbles strip to the right side of the flying goose unit (Figure 29). Sew one 2" x 16 ½" Blue Bubbles strip to the bottom of the sewn unit to make the submarine bottom row (Figure 30). Repeat to make six submarine bottom rows.

Page 5 of 6

(15) (16) (17)

(18)

(19)

(21) (22)

(23)

(24)

(25) (26) (27) (28)

(29) (30)

(20)

Make 6

Make 6

Make 6

Make 6

Make 6

www.studioefabrics.com•STUDIO e PROJECTS•

© 2011 Studio e Fabrics®

25. Sew one top submarine row, one middle submarine row and one bottom submarine row together to make one submarine block (Figure 31). Repeat to make six 15 ½" x 16 ½" submarine blocks.

26. Sew one 1 ½" x 15 ½" Blue Fish strip to each side of each submarine block (Figure 32). Sew one 2" x 18 ½" Blue Fish strip to the top and bottom of the submarine block to complete the 18 ½" square (Figure 33). Repeat to add sashing to all six submarine blocks.

Quilt Top Assembly27. Starting and ending with one submarine block, sew together two submarine blocks and one 9-patch block, alternating them to make Row One. Press toward the submarine blocks. Repeat to make Row Three.

28. Starting and ending with one 9-patch block, sew together two 9-patch blocks and one submarine block, alternating them to make Row Two. Press toward the submarine block. Repeat to make Row Four.

29. Sew the rows together in numerical order to make the 54 ½" x 72 ½" quilt top.

30. Sew one 2 ½" x 72 ½" Dark Blue Words strip to each side of the quilt top. Press toward the Dark Blue Words strips. Sew one 2 ½" x 58 ½" Dark Blue Strip to the top and bottom of the quilt top. Press toward the Dark Blue Words strips.

31. Sew one 6 ½" x 76 ½" Blue Allover strip to each side of the quilt top. Press toward the Blue Allover strip.

32. Sew one 6 ½" Lime Octopus square to each end of the two 6 ½" x 58 ½" Blue Allover strips to make the top and bottom outer borders. Press toward the Blue Allover. Sew the borders to the quilt top. Press toward the outer border.

33. Layer, quilt, and bind as desired.

Page 6 of 6

(31)(32)

3 " Circle Template2 ½" Circle Template

(33)

Make 6