Features of the VEREO Fiber System: Laser Marker Datasheets/TYKM… · VEREO Fiber Laser Marker The...
2
Compact, Air-Cooled, High Performance Fiber Laser Features On-Board CPU TYKMA’s VEREO™ FIBER LASER offers the latest, most advanced features in the laser marking industry. Available with a 10 or 20 watt power output rating, VEREO™ is ideal for marking all metals and most plastic surfaces. It’s an excellent choice for aggressive marking where depth is important. The scan head is extremely compact, making VEREO™ ideal for use in tight spaces and integrated applications. The laser control system and CPU are packaged within a slim, 19” rack-mount footprint, eliminating the need for an external PC. VEREO™ is air-cooled and maintenance-free. Features • Air-Cooled, Maintenance- Free Design • Compact, 19” Rack-Mount Configuration • On-board CPU & Control Card System • Advanced Communication Capability including Ethernet, Discreet I/O, RS232 and RS485 • Control of up to Four External Axes and Mark-on- the-Fly Capability • Available as an OEM system or with Minilase™, Zeta™ and Custom-Engineered Enclosures • Two-Year Warranty Vereo ™ Fiber Laser Marker DATA SHEET Powerful. Simple. Affordable. TYKMA Technologies • P.O. Box 917 • 931 East Water Street • Chillicothe, Ohio 45601 Phone (740) 779-9918 • Fax (740) 779-9910 • Toll Free 877-318-9562 • www.permanentmarking.com LASERS FOR MARKING
Transcript of Features of the VEREO Fiber System: Laser Marker Datasheets/TYKM… · VEREO Fiber Laser Marker The...
VEREO Fiber Laser Marker
The Vereo Fiber laser marker offers the latest in advanced features in the laser marking industry. The Vereo Fiber system is available in a 10 or 20 Watt power output rating.
This fiber laser system is ideal for marking a wide range of materials including all metals and most plastics. The system is also ideal for deep engraving and aggressive marking where depth is important.
The laser controls are packaged into a slim 19” rack mount design with an onboard CPU and control system completely eliminating the need for an external PC. The system is air cooled and maintenance free.
Vereo Fiber also features an extremely compact scanhead assembly making it ideal for tight spaces and integrated applications.
High Performance Fiber Laser with Onboard CPU and Control System in a Compact Footprint
Features of the VEREO Fiber System:
Onboard CPU and Control Card system eliminate the need for an external PC
Air cooled, maintenance free design with integrated diagnostics
Compact 19” rack mount configuration (30 Watt Only)
Advanced communication capability:-Ethernet, RS232 and RS485
2 Year Warranty
Mark-on-the-fly capability for the marking and coding of moving objects and control for up to 4 external axes
Compact, Air-Cooled, High Performance Fiber Laser Features On-Board CPU
TYKMA’s VEREO™ FIBER LASER offers the latest, most advanced features in the laser marking industry. Available with a 10 or 20 watt power output rating, VEREO™ is ideal for marking all metals and most plastic surfaces. It’s an excellent choice for aggressive marking where depth is important. The scan head is extremely compact, making VEREO™ ideal for use in tight spaces and integrated applications.
The laser control system and CPU are packaged within a slim, 19” rack-mount footprint, eliminating the need for an external PC. VEREO™ is air-cooled and maintenance-free.
Features
• Air-Cooled, Maintenance-Free Design
• Compact, 19” Rack-Mount Configuration
• On-board CPU & Control Card System
• Advanced Communication Capability including Ethernet, Discreet I/O, RS232 and RS485
• Control of up to Four External Axes and Mark-on-the-Fly Capability
• Available as an OEM system or with Minilase™, Zeta™ and Custom-Engineered Enclosures
• Two-Year Warranty
Vereo™ FiberLaser Marker
DA
TA
SH
EE
T
Powerful. Simple. Affordable. TYKMA Technologies • P.O. Box 917 • 931 East Water Street • Chillicothe, Ohio 45601
Phone (740) 779-9918 • Fax (740) 779-9910 • Toll Free 877-318-9562 • www.permanentmarking.com
L A S E R S F O R M A R K I N G
TYKMA Technologies • 931 E Water St., Chillicothe, OH 45601
Toll Free: 877-318-9562 • Fax: 740-779-9910
[email protected] • www.permanentmarking.com
TYKMA follows a policy of continuous product improvement. Specifications aresubject to change without notice.
Control Rack Assembly Scanhead Assembly
VEREO is a class 4 laser product when not provided with an TYKMA certified Class 1 safety enclosure.
This class 4 laser component is offered to qualified manufacturers who shall provide interlocks, indicators and other appropriate safety features in full compliance with CFR1040 and/or other applicable national and local regulations.
Laser interaction with organic or inorganic material can cause TOXIC FUMES / PARTICLES.
VEREO Fiber
10 Watt 20 Watt
f
TYKMA Technologies • 931 E Water St., Chillicothe, OH 45601
Toll Free: 877-318-9562 • Fax: 740-779-9910
[email protected] • www.permanentmarking.com
TYKMA follows a policy of continuous product improvement. Specifications aresubject to change without notice.
Control Rack Assembly Scanhead Assembly
VEREO is a class 4 laser product when not provided with an TYKMA certified Class 1 safety enclosure.
This class 4 laser component is offered to qualified manufacturers who shall provide interlocks, indicators and other appropriate safety features in full compliance with CFR1040 and/or other applicable national and local regulations.
Laser interaction with organic or inorganic material can cause TOXIC FUMES / PARTICLES.
VEREO Fiber
10 Watt 20 Watt
f
TYKMA Technologies • 931 E Water St., Chillicothe, OH 45601
Toll Free: 877-318-9562 • Fax: 740-779-9910
[email protected] • www.permanentmarking.com
TYKMA follows a policy of continuous product improvement. Specifications aresubject to change without notice.
Control Rack Assembly Scanhead Assembly
VEREO is a class 4 laser product when not provided with an TYKMA certified Class 1 safety enclosure.
This class 4 laser component is offered to qualified manufacturers who shall provide interlocks, indicators and other appropriate safety features in full compliance with CFR1040 and/or other applicable national and local regulations.
Laser interaction with organic or inorganic material can cause TOXIC FUMES / PARTICLES.
VEREO Fiber
10 Watt 20 Watt
f
877-318-9562931 East Water StreetChillicothe, Ohio 45601www.permanentmarking.com
Control Rack AssemblyVEREO™ FIBER Specifications
10 Watt 20 Watt
Nominal Power 10W 20W
Peak Power (max) 5kW 10kW
Input Voltage 115 VAC
Frequency Range 20-100kHz
Aiming Beam Class 2M Red Diode 635nm
Communication Ethernet / RS232 / RS485
Warranty 24 Month / Unlimited Hours
Head Cable Length 3 m standard
Wavelength 1060-1080 nm
Laser Source Solid State Fiber Laser
Emission Radiation Pulsed
Pulsewidth 100 nsec
Aiming Beam 1mW @ 635 nm
Temperature Range Operative 50°F to 95°F
Cooling Air cooled
Collimator Dimension 90x112x298 mm
Collimator Weight 4.4 lbs
Rack Dimension 106x430x370 mm
Rack Weight 24.25 lbs
Available Lens 160 mm – 100x100 mm Configurations 254 mm – 140x140 mm 330 mm – 220x220 mm
TYKMA Technologies • 931 E Water St., Chillicothe, OH 45601
Toll Free: 877-318-9562 • Fax: 740-779-9910
[email protected] • www.permanentmarking.com
TYKMA follows a policy of continuous product improvement. Specifications aresubject to change without notice.
Control Rack Assembly Scanhead Assembly
VEREO is a class 4 laser product when not provided with an TYKMA certified Class 1 safety enclosure.
This class 4 laser component is offered to qualified manufacturers who shall provide interlocks, indicators and other appropriate safety features in full compliance with CFR1040 and/or other applicable national and local regulations.
Laser interaction with organic or inorganic material can cause TOXIC FUMES / PARTICLES.
VEREO Fiber
10 Watt 20 Watt
f
TYKMA follows a policy of continuous product improvement. Specifications are subject to change without notice.
VEREO™ is a class 4 laser product when not provided with a TYKMA certified Class 1 safety enclosure. This class 4 laser component is offered to qualified manufacturers who shall provide interlocks, indicators and other appropriate safety features in full compliance with CFR 1040 and/or other applicable national and local regulations.
Laser interaction with organic or inorganic materials can cause TOXIC FUMES/PARTICLES. TYKMA highly recommends and provides a variety of fume extraction equipment to minimize dust, fumes or smoke that can be created during deep engraving or the marking of plastics, anodized, painted and other coated materials. Proper use and maintenance of your TYKMA Laser Marking System ensures optimum performance and prolongs equipment life.
VF/DS: 1/12
DA
TA
SH
EE
T
