FEATURES CONFIGURATIONS SPECIFICATIONS...A64 ExC 2-500N A64 ExC 2-500 A64 ExC 2-500L A64 ExC 2-500ER...

26
Second Edition A64 PRODUCT CATALOG FEATURES CONFIGURATIONS SPECIFICATIONS

Transcript of FEATURES CONFIGURATIONS SPECIFICATIONS...A64 ExC 2-500N A64 ExC 2-500 A64 ExC 2-500L A64 ExC 2-500ER...

  • Second Edition

    A64 PRODUCT CATALOGFEATURES • CONFIGURATIONS • SPECIFICATIONS

  • Built for Mining

    The Getman A64 product range is engineered to provide a single common chassis available in configurations covering many production and production support applications, and increases value by minimizing inventory carrying costs and training requirements through its standardized design.

    The A64 product line works with maximum availability to perform tasks that optimize the safety and productivity of underground mining operations, delivering materials where they need to be when they need to be there, charging explosives safely and efficiently, facilitating ground control operations in the toughest environments, and much more.

    Getman A64 units not only safeguard the workers using the equipment, they redefine how tasks are performed, making underground mining operations safer and more efficient.

    Table of ContentsPurpose-Built Design 3

    CommonalityCustom SolutionsEfficiencyCost and MaintenanceSafetyMachine Layout

    Explosives Chargers 5A64 ExC 3000A64 ExC 2-500NA64 ExC 2-500A64 ExC 2-500LA64 ExC 2-500ERA64 ExC 2-1300

    Scissor Lifts 9A64 SL-SA64 SLA64 SL WingA64 SL SliderA64 SL 6MA64 SL Hanger

    Material Transporters 13A64 Crane-SA64 Crane

    Service Trucks 15A64 Service Lube-SA64 Service Lube

    Multi-Purpose Trucks 17A64 Pallet Handler

    Additional A64 Models 19A64 Personnel CarrierA64 HD Pallet HandlerA64 ExC TransporterA64 Mechanics TruckA64 Boom TruckA64 Water SprayerA64 Uphole ChargerA64 Cable Stringer

    A64 Performance Data 22Speed Charts

    Getman Corporation assembled this catalog with the intention of passing along the most accurate information possible, however this document shall not be binding in any way and shall be considered informational only. Getman reserves the right to make changes to the specifications herein at any time and without further notification.

  • A64 Technical Features

    ENGINE• EPA Tier III Engine

    › Mercedes Benz OM904LA, 129 kW (173 hp) @ 2200 rpm › Cummins QSB4.5L, 127 kW (170 hp) @ 2200 rpm

    • Donaldson Dry Dual-Element Air Cleaner• Catalytic Exhaust Purifier with Muffler• 24 V, 100 A Alternator• 113 L (30 gal) Fuel Capacity

    FULL REVERSING POWERSHIFT TRANSMISSION• Dana 32000, 3-Speed Transmission• 4-Wheel Drive

    AXLES AND TIRES• Inboard Planetary Axles with Inboard Wet Disc Brakes

    › Standard Heavy-Duty Carraro 28.43 Axle Package › Enhanced Capacity Carraro 28.60 Axle Package

    • Mine Service Tires › 10.00×20-16PR › 12.00×20-28PR

    INDEPENDENT BRAKING SYSTEMS• Service Brakes: Fully Hydraulic Wet Disc Brakes on Each

    Axle• Secondary Brake: Spring Applied, Hydraulic Released Wet

    Disc• Automatic Secondary Brake Application Upon Loss of Brake

    Accumulator Pressure, Transmission Pressure or Electrical Power

    ORBITROL CONTROLLED, ARTICULATED STEERING• Heavy-Duty, Self-Aligning Bearings Inside Replaceable

    Inserts• Two Double-Acting Steering Cylinders

    HYDRAULIC SYSTEM• Open Center Hydraulic Circuits with Gear Hydraulic Pump• Hydraulic Hoses Routed on Engine Cold Side

    INSTRUMENTS AND ELECTRICAL• Full Instrumentation Including Engine and Transmission

    Gauges, Voltmeter and Hour Meter• Instrumentation and Associated Switches Mounted in Sealed

    Electrical Box• Sealed and Oil Resistant Wiring System Including Fully

    Sealed Connectors• Lockable Battery Master Disconnect Switch• LED Lighting Package

    OPERATOR STATION• Three-Point Contact for Entry and Exit• ROPS/FOPS Certified Compartment

    › Open Canopy › Enclosed Cabin with Heater, Air Conditioner and Optional

    Pressurizer• Operator and Passenger Seating• Mechanical Suspension Driver Seat

    STANDARD EQUIPMENT• Audio Backup Alarm, Variable Output from 87-112 dBA• One 2.3 kg (5 lb) Fire Extinguisher• Ansul Fire Suppression System (Ansul LTA-101-30) Tied to

    Engine Shutdown• White Epoxy Finish Paint

    TRAMMING GRADIENTS• Up to 30% Max Recommended Longitudinal Gradient While

    Tramming (Dependent on Axles and Machine Weight)• 9% Max Recommended Transverse Gradient While Tramming

    WARRANTY• 1-Year/2,000-Hour Standard Warranty• 5-Year/10,000-Hour Warranty on Frame and Select

    Structural Components

  • 1

  • 2

  • 3

    Purpose-Built Design

    CUSTOM SOLUTIONS

    The A64 product range is customizable for new and specific application requirements while maintaining all of the advantages inherit in the product line. Our customer-specific solutions are driven by a proven engineer-to-order process, providing value to an A64 fleet.

    EFFICIENCY

    A64 vehicles are designed exclusively for underground mining and improve efficiency by reducing the amount of workers, equipment and time required to complete everyday tasks.

    COST AND MAINTENANCE

    A64 fleets reduce inventory requirements and simplify maintenance by using common components and having a consistent product layout.

    • Reduced inventory requirements: Components can be specified identically across all A64 models, including axles, tires, engines, transmissions, seats and many hydraulic and electrical components

    • Simplified maintenance: Utilization of common systems between models allows for efficient maintenance programs throughout the fleet

    COMMONALITY

    The A64 product range shares common components and systems across all models, a valuable feature that extends through the wide range of models available on the A64 chassis. Maintaining commonality throughout the A64 range drives value through:

    • Increased safety through enhanced machine familiarity• Minimized training requirements through use of similar

    hydraulic, electric and powertrain systems• Lower inventory through shared components across all

    models

  • 4

    MACHINE LAYOUT

    1. ROPS/FOPS open canopy or enclosed cabin with three points of contact for entry and egress

    2. Heavy-duty powertrain components to ensure the optimal combination of power, performance and reliability in underground environments

    3. All daily maintenance and service performed from ground level

    4. Anti-skid surfaces and fall arrest tie off points

    5. Fabricated box-section frames and structural components meet the highest standards in the mining industry backed by a 5-year frame warranty

    6. Ansul fire suppression system and fire extinguisher(s)7. High ground clearance and entry/exit angles8. Mounted equipment such as boom/basket assemblies and

    cranes are mounted over the frame to protect from accidental impact with walls and to reduce fatigue while tramming

    85

    1 2

    SAFETY

    Getman A64 products are focused on increasing safety in underground mining operations through purpose-built design. They provide equipment solutions engineered and built to perform everyday tasks throughout the underground mining cycle.

    At Getman Corporation, designing purpose-built equipment means understanding the needs of underground mining operations, and providing safe and reliable solutions to meet those needs.

    Purpose-built A64 equipment:

    • Enables miners to do jobs properly in the safest and most efficient manner possible, maximizing machine and worker productivity

    • Avoids improvised solutions because the equipment is designed and built for the tasks

    • Reduces fall risk by providing stable, skid-proof work surfaces and fall arrest tie off points

    • Decreases miner fatigue and strain-related injuries by providing mechanical lift capabilities

    4

    6 7

    3

  • 5

    Explosives Chargers

    The complete line of Getman Explosives Chargers is engineered to transport and charge explosives safely and efficiently in multiple development and production applications.

    A wide range of boom configurations allow for charging multiple face sizes or in up-hole settings, and each Getman Explosives Charger can be configured to accommodate ANFO (Ammonium Nitrate and Fuel Oil) packages or emulsion packages, or both. ANFO storage tank capacity can be optimized to meet a variety of applications, and the Getman chassis accommodates most third party emulsion pumping systems.

    Like all Getman A64 units, our Explosives Chargers are designed with safety as a primary consideration. Operators are protected by key features including fall arrest anchor points in the man basket. Counterbalance valves in the boom lift cylinders keep the basket from falling rapidly in the event of a damaged hose, and the ROPS/FOPS operator station canopy provides safety during tramming.

    DESIGN• The boom and basket assembly is positioned over the chassis

    during tramming to reduce stresses on the boom, and to protect the boom and basket in the event of accidental contact with the mine walls

    • Special corrosion-resistant hydraulic fittings are used in boom and basket assembly for improved performance when exposed to corrosive explosive materials

    EXPLOSIVES PACKAGE• Equipped with an ANFO package and/or plug-and-play ready

    for a third-party emulsion package• Multiple ANFO configurations and capacities are available,

    including one or two stainless steel ANFO vessels and single or dual delivery systems

    • Laminated (steel/gypsum board/plywood) stick powder and cap storage compartments (30 CFR § 57.6201 Compliant)

    • Equipped to charge explosives utilizing the mine’s air system and/or in a self-contained version with an onboard air compressor

    MAN LIFT DEVICE • Telescopic boom with counterbalance valves• Self-leveling man basket• Dual boom controls: lower controls at base of boom, upper

    controls (pilot hydraulic) in man basket• Four hydraulic stabilizers with pilot check valves• Engine start/stop and fire suppression activation controls in

    man basket• Fall arrest anchor points standard on all elevated work baskets

    OPTIONS• Air-powered electric/hydraulic package for charging

    explosives with the diesel engine off• Emergency electric-powered hydraulic boom lowering

    package• Safety Interlock Control System (SICS) assures stabilizers are

    extended before boom operation• Hydraulic-powered hose pusher

  • 2134[7’]

    6248[20’-6”]

    1972[6’-6”]

    2328[7’-8”]

    275 kg ANFO VESSEL

    450 kg ANFO VESSEL

    8134[26’-8”]

    10.00 x 20TIRES

    283[11”]

    GRNDCLRN

    3353[11’]

    18°

    2258[7’-5”]

    40°

    50°100°

    3471[11’-5”]

    267[11”]

    1956[6’-5”]

    AIR COMPRESSOR

    3471[11’-5”]

    R3725[R12’-3”]

    R6104[R20’]

    2000[6’-7”]

    1000[3’-3”]CAP BOX

    280 x 465 x 470[11” x 18-3/8” x 18-1/2”]

    CAP BOX270 x 370 x 545

    [10-11/16” x 14-1/2” x 21-1/2”]

    Boom Coverage with Machine 305 mm (12 in) from Face

    4M

    3M

    2M

    1M

    6M

    5M

    0M 1M 2M 3M 4M1M2M3M4M

    0’ 3.3’ 6.6’ 9.8’ 13.1’3.3’6.6’9.8’13.1’

    13.1’

    9.8’

    6.6’

    3.3’

    19.7’

    16.4’

    2085[6’-10”]

    5634[18’-6”]

    12.00 x 20TIRES

    275 kg ANFO VESSEL

    450 kg ANFO VESSEL

    18°

    STORAGE BOX813 x 330 x 356[32” x 13” x 14”]

    AIR COMPRESSOR

    55°110°

    40°

    45°

    1M

    2M

    3M

    4M

    5M

    6M

    7M

    1M2M3M4M5M 0M 1M 2M 3M 4M 5M

    Boom Coverage with Machine 305 mm (12 in) from Face

    6096[20’]

    2134[7’]

    2415[7’-11”]

    8940[29’-4”]

    4267[14’]

    311[12.25”]

    GRNDCLRN

    2287[7’-6”]

    2085[6’-10”]

    3956[13’]

    2097[6’-11”]

    6564[21’-6”] 2000

    [6’-7”]

    1000[3’-3”]

    3956[13’]

    R4600[R15’-1”]

    R7208[R23’-8”]

    2083[6’-10”]

    3.3’6.6’9.8’13.1’16.4’ 0’ 3.3’ 6.6’ 9.8’ 13.1’ 16.4’

    8M

    3.3’

    6.6’

    9.8’

    13.1’

    16.4’

    19.7’

    23’

    26.2’

    6

    A64 ExC 3000

    Unloaded Vehicle Weight: 11,800 kg (26,000 lb)(Model not available in all markets)

    A64 ExC 2-500N

    Unloaded Vehicle Weight: 12,700 kg (28,000 lb)

    AIR SUPPLY OPTIONS

    Mine Air ü

    1.70 m3/min (60 cfm) compressor ü

    2.41 m3/min (85 cfm) compressor ü

    3.54 m3/min (125 cfm) compressor

    MAN BASKET CONFIGURATION

    230 kg (500 lb) basket capacity ü

    600 kg (1300 lb) basket capacity

    Rotating man basket

    EXPLOSIVES PACKAGE OPTIONS

    275 kg (600 lb) ANFO pot ü

    450 kg (1000 lb) ANFO pot ü

    900 kg (2000 lb) ANFO pot

    Two 450 kg (1000 lb) ANFO pots

    Two 900 kg (2000 lb) ANFO pots

    Emulsion-ready package ü

    AIR SUPPLY OPTIONS

    Mine Air ü

    1.70 m3/min (60 cfm) compressor ü

    2.41 m3/min (85 cfm) compressor ü

    3.54 m3/min (125 cfm) compressor ü

    MAN BASKET CONFIGURATION

    230 kg (500 lb) basket capacity ü

    600 kg (1300 lb) basket capacity

    Rotating man basket ü

    EXPLOSIVES PACKAGE OPTIONS

    275 kg (600 lb) ANFO pot ü

    450 kg (1000 lb) ANFO pot ü

    900 kg (2000 lb) ANFO pot

    Two 450 kg (1000 lb) ANFO pots ü

    Two 900 kg (2000 lb) ANFO pots

    Emulsion-ready package ü

  • 450 kg ANFO VESSEL

    900 kg ANFO VESSEL6096[20’]

    18°

    12.00 x 20TIRES

    STORAGE BOX813 x 330 x 356[32” x 13” x 14”]

    AIRCOMPRESSOR

    55°110°

    40°

    45°

    1M

    2M

    3M

    4M

    5M

    6M

    7M

    1M2M3M4M5M 0M 1M 2M 3M 4M 5M

    Boom Coverage with Machine 305 mm (12 in) from Face

    2134[7’]

    5634[18’-6”]

    2415[95”]2785

    [110”]

    9319[30’-7”]

    4877[16’]

    311[12.25”]

    GRNDCLRN

    2287[7’-6”]

    4456[14’-7”]

    2286[7’-6”]

    6564[21’-6”]

    2000[6’-7”]

    1000[3’-3”]

    4456[14’-7”]

    R5224[R17’-2”]

    R8150[R26’-9”]

    2083[6’-10”]

    8M

    3.3’

    6.6’

    9.8’

    13.1’

    16.4’

    19.7’

    23’

    26.2’

    3.3’6.6’9.8’13.1’16.4’ 0’ 3.3’ 6.6’ 9.8’ 13.1’ 16.4’

    7

    A64 ExC 2-500

    Unloaded Vehicle Weight: 13,000 kg (28,700 lb)

    A64 ExC 2-500L

    Unloaded Vehicle Weight: 14,600 kg (32,200 lb)

    AIR SUPPLY OPTIONS

    Mine Air ü

    1.70 m3/min (60 cfm) compressor ü

    2.41 m3/min (85 cfm) compressor ü

    3.54 m3/min (125 cfm) compressor ü

    MAN BASKET CONFIGURATION

    230 kg (500 lb) basket capacity ü

    600 kg (1300 lb) basket capacity

    Rotating man basket ü

    EXPLOSIVES PACKAGE OPTIONS

    275 kg (600 lb) ANFO pot ü

    450 kg (1000 lb) ANFO pot ü

    900 kg (2000 lb) ANFO pot ü

    Two 450 kg (1000 lb) ANFO pots ü

    Two 900 kg (2000 lb) ANFO pots ü

    Emulsion-ready package ü

    AIR SUPPLY OPTIONS

    Mine Air ü

    1.70 m3/min (60 cfm) compressor ü

    2.41 m3/min (85 cfm) compressor ü

    3.54 m3/min (125 cfm) compressor ü

    MAN BASKET CONFIGURATION

    230 kg (500 lb) basket capacity ü

    600 kg (1300 lb) basket capacity

    Rotating man basket ü

    EXPLOSIVES PACKAGE OPTIONS

    275 kg (600 lb) ANFO pot ü

    450 kg (1000 lb) ANFO pot ü

    900 kg (2000 lb) ANFO pot ü

    Two 450 kg (1000 lb) ANFO pots ü

    Two 900 kg (2000 lb) ANFO pots ü

    Emulsion-ready package ü

  • 1M

    2M

    3M

    4M

    5M

    6M

    7M

    8M

    9M

    10M

    1M2M3M4M5M6M 0M 1M 2M 3M 4M 5M 6M7M8M 7M 8M

    Boom Coverage with Machine 305 mm (12 in) from Face

    450 kg ANFO VESSEL900 kg ANFO VESSEL

    9117[29’-11”]

    13°

    12.00 x 20TIRES

    762 [30"]STABILIZERS

    AIRCOMPRESSOR

    55°110°

    40°

    45°

    7620[25’]

    2134[7’]

    10946[35’-11”]

    4877[16’]

    311[12.25”]

    GRNDCLRN

    2415[7’-11”]

    2785[9’-2”]

    2922[7’-6”]

    4929[16’-2”]

    2559[8’-5”]

    1108[3’-8”]

    FOLD DOWNSTABILIZERS

    2000[6’-7”]

    1000[3’-3”]

    R5120[R16’-10”]

    4929[16’-2”]

    R8550[R28’-1”]

    2083[6’-10”]

    11M

    3.3’

    6.6’

    9.8’

    13.1’

    16.4’

    19.7’

    23’

    26.3’

    29.5’

    32.8’

    36.1’

    3.3’6.6’9.8’13.1’16.4’19.7’ 0’ 3.3’ 6.6’ 9.8’ 13.1’ 16.4’ 19.7’23’26.3’ 23’ 26.3’

    8

    A64 ExC 2-500ER

    Unloaded Vehicle Weight: 15,900 kg (35,000 lb)

    A64 ExC 2-1300

    Unloaded Vehicle Weight: 15,650 kg (34,500 lb)

    AIR SUPPLY OPTIONS

    Mine Air

    1.70 m3/min (60 cfm) compressor ü

    2.41 m3/min (85 cfm) compressor ü

    3.54 m3/min (125 cfm) compressor ü

    MAN BASKET CONFIGURATION

    230 kg (500 lb) basket capacity ü

    600 kg (1300 lb) basket capacity

    Rotating man basket ü

    EXPLOSIVES PACKAGE OPTIONS

    275 kg (600 lb) ANFO pot ü

    450 kg (1000 lb) ANFO pot ü

    900 kg (2000 lb) ANFO pot ü

    Two 450 kg (1000 lb) ANFO pots ü

    Two 900 kg (2000 lb) ANFO pots ü

    Emulsion-ready package ü

    AIR SUPPLY OPTIONS

    Mine Air

    1.70 m3/min (60 cfm) compressor ü

    2.41 m3/min (85 cfm) compressor ü

    3.54 m3/min (125 cfm) compressor ü

    MAN BASKET CONFIGURATION

    230 kg (500 lb) basket capacity

    600 kg (1300 lb) basket capacity ü

    Rotating man basket ü

    EXPLOSIVES PACKAGE OPTIONS

    275 kg (600 lb) ANFO pot ü

    450 kg (1000 lb) ANFO pot ü

    900 kg (2000 lb) ANFO pot ü

    Two 450 kg (1000 lb) ANFO pots ü

    Two 900 kg (2000 lb) ANFO pots ü

    Emulsion-ready package ü

  • 9

    Scissor Lifts

    The Getman line of mobile elevated platform trucks delivers a safe, reliable and productive range of vehicles for use in a wide assortment of maintenance and construction operations including: roof-bolting; screening and surveying; cable, pipe, and vent hanging; and many other back and rib projects.

    Built on the A64 Chassis, Getman offers six variations on the Scissor Lift designed to meet the specific needs of your underground operation. Each utilizes common components and systems with the entire A64 range of production and production support equipment.

    Safety in the Getman Scissor Lift range is emphasized by fall arrest anchor points located through the non-skid platform, while all Getman scissor lift trucks are thoroughly reviewed to ensure maximum stability during working operations.

    DESIGN• Compliant with all recognized standards for stability• Dual controls: lower controls on the rear frame, upper controls

    (pilot hydraulic) on platform deck › Optional electric platform and stabilizer controls located in

    the operator station• Engine start/stop and fire suppression activation controls

    located on the platform• Four 610 mm (24 in) stabilizers standard on most models

    › Optional four 1220 mm (48 in) leveling jacks to level the platform when working on ramps

    • Telescopic ladder available on most models allowing maximum operational flexibility for work crews

    SCISSOR LIFT FEATURES• Non-skid platform with capacities up to 3,600 kg (8,000 lb)• Two 3-stage, single-acting cylinders with in-line flow limiters

    to prevent uncontrolled descent in the event of hose failure or damaged hose › Optional counterbalance valves on lift cylinders (replacing

    in-line flow limiters) with emergency platform lowering pump-off package

    • Fixed safety railing with mid-rail or safety chain• Fall arrest tie-offs standard on all elevated work platforms

    OPTIONS• Air powered electric/hydraulic system (using mine air while

    diesel engine not operating)• Manual pipe jacks• Safety Interlock Control System (SICS) assuring stabilizers are

    extended before platform operation

    PLATFORM CAPACITIESStandard Lift Arms

    28.43 AxlesHD Lift Arms28.43 Axles

    HD Lift Arms28.60 Axles

    A64 SL-S 2,500 kg(5,500 lb)

    2,700 kg(6,000 lb)

    A64 SL 2,500 kg(5,500 lb)

    2,700 kg(6,000 lb)

    2,700 kg(6,000 lb)

    A64 SL Wing

    2,040 kg(4,500 lb)

    2,700 kg(6,000 lb)

    A64 SL Slider

    2,040 kg(4,500 lb)

    2,700 kg(6,000 lb)

    A64 SL 6M

    3,600 kg(8,000 lb)

    A64 SL Hanger

    2,175 kg(4,800 lb)

  • 7403[24’-4”]

    10.00 x 20TIRES

    457 [18"]STABILIZERS

    18°

    40°

    3048[10’]

    283[11.125”]

    GRNDCLRN

    2259[7’-5”]

    3175[10’-5”]

    1974[6’-6”] 3271

    [10’-9”]

    1661[5’-5”]

    2000[6’-7”]

    1000[3’-3”]

    3175[10’-5”]

    R3147[R10’-4”]

    R5400[R17’-9”]

    2083[6’-10”]

    5091[16’-8”]

    4191[13’-9”]

    4267[14’]

    12.00 x 20TIRES

    18°

    40°

    7868[25’]

    311[12.25”]

    GRNDCLRN

    2284[7’-6”]

    2483[8’-2”]

    4005[13’-2”]

    2153[7’-1”]

    2127[7’]

    3289[10’-10”]

    2000[6’-7”]

    1000[3’-3”]

    4005[13’-2”]

    R4551[R14’-11”]

    R7223[R23’-8”]

    2083[6’-10”]

    5337[17’-6”]

    4220[13’-10”]

    10

    A64 SL-S

    Unloaded Vehicle Weight: 10,900 kg (24,000 lb)

    A64 SL

    Unloaded Vehicle Weight: 12,250 kg (27,000 lb)

  • 7911[25’-11”]

    12.00 x 20TIRES

    1220 [48"]STABILIZERS

    18°

    [98”]2492

    40°

    4268[14’]

    311[12.25”]

    GRNDCLRN

    2292[7’-6”]

    4119[13’-6”]

    2115[6’-11”]

    3062[10’-1”]

    1829[6’]

    3340[11’]

    2000[6’-7”]

    1000[3’-3”]

    4119[13’-6”]

    R4599[R15’-1”]

    R7371[R24’-2”]

    5415[17’-9”]

    4295[14’-1”]

    2034[6’-8”]

    3267[10’-9”]

    2404[7’-11”]

    OPTIONAL FRONTMOUNTED JACKS

    18°

    7911[25’-11”]

    12.00 x 20TIRES

    40°

    4268[14’]

    311[12.25”]

    GRNDCLRN

    2292[7’-6”]

    2771[9’-1”]

    4144[13’-7”]

    2153[7’-1”]

    2134[7’]

    3353[11’]

    2000[6’-7”]

    1000[3’-3”]

    R4564[R15’]

    4144[13’-7”]

    R7371[R24’-2”]

    5569[18’-3”]

    4479[14’-8”]

    3271[10’-9”]497

    [20”]621

    [24”]

    2404[8’-11”]

    1220 [48"]STABILIZERS

    11

    A64 SL SLIDER

    Unloaded Vehicle Weight: 13,600 kg (30,000 lb)

    A64 SL WING

    Unloaded Vehicle Weight: 12,950 kg (28,500 lb)

  • 2623[8’-7”]

    12.00 x 20TIRES

    18°

    457 [18"] STABILIZERS

    40°

    2292[7’-6”]

    4268[14’]

    7645[25’-1”]

    311[12.25]

    GRNDCLRN

    4003[13’-2”]

    2134[7’]

    3353[11’]

    2000[6’-7”]

    1000[3’-3”]

    R4909[R16’-1”]

    4003[13’-2”]

    R7475[R24’-6”]

    7500[24’-7”]

    6576[21’-7”]

    2134[7’]

    2083[6’-10”]

    12

    A64 SL 6M

    Unloaded Vehicle Weight: 15,000 kg (33,000 lb)(Model not available in all markets)

    A64 SL HANGER

    Unloaded Vehicle Weight: 15,900 kg (35,000 lb)

    SCISSOR LIFT FEATURES• Deck mounted low-profile crane able to lift loads up

    to 1,770 kg (3,900 lb)• Pipe jacks with grapples to handle maximum 6100

    mm (20 ft) long, 200 mm (8 in) diameter, schedule 80 pipe

    • Scissor mechanism flush-mounted on platform for elevating fans up to 2,180 kg (4,800 lb)

    ADDITIONAL OPTIONS• Platform side-shifting pipe hanger model• Heavy-duty paste-pipe installation/repair model

  • 13

    Material Transporters

    The Getman line of knuckle crane and flat deck trucks, all built on the A64 Chassis, includes a variety of multipurpose vehicles designed to perform a wide range of maintenance and logistics functions in underground mining operations.

    A64 Crane trucks enhance safety and productivity by performing heavy lifting and transport operations with a purpose-built solution, resulting in fewer accidents and injuries during the process of moving components and supplies throughout the mining operation. Getman Crane trucks also add value to mining operations by ensuring that materials are delivered throughout the mine on time, going where they are needed, and performing when they are needed.

    The design of the A64 Crane truck is optimized to deliver maximum utility in a compact envelope. The high-capacity knuckle crane is mounted near the articulation joint to maximize payload and available deck space. Deck options include low flatdeck and high flushdeck allowing for a wide variety of loading scenarios.

    DESIGN• Crane mounted at the machine articulation joint to maximize

    payload and available deck space• Crane assembly mounted within frame envelope for protection

    from accidental contact with mine walls during tramming• Outriggers mounted on the crane allow unrestricted crane

    capacity when articulated• Available tie-down straps for securing cargo during tramming• Additional storage compartments available under the deck

    CRANE FEATURESHiab 044-1 (A64 Crane-S)

    • 2-section knuckle crane• 39 kN•m (28,800 ft•lb) class capacity• 4.7 m (15 ft 5 in) maximum outreach with 830 kg (1,850 lb)

    capacity• 180° slewing angle

    Palfinger PK8501A (A64 Crane):• 3-section low mast crane• 76.5 kN•m (56,440 ft•lb) class capacity• 7.6 m (25 ft) maximum outreach with 2,100 kg (4,629 lb)

    capacity• 180° slewing angle

    DECK CONFIGURATIONS• Low Flatdeck: Deck height 848 mm (2 ft 9 in), distance

    between the fenders 1251 mm (4 ft 1 in)• High Flushdeck: Deck height 1172 mm (3 ft 10 in), mounted

    over fenders for a fully flat cargo area

    OPTIONS• Crane cylinder rod guards• All models also available without crane

    LOAD CAPACITIES28.43 Axles10x20 Tires

    28.43 Axles12x20 Tires

    28.60 Axles12x20 Tires

    A64 Crane-S Low Flatdeck

    4,540 kg(10,000 lb)

    A64 CraneLow Flatdeck

    4,540 kg(10,000 lb)

    5,450 kg(12,000 lb)

    8,620 kg(19,000 lb)

    A64 CraneHigh Flushdeck

    4,540 kg(10,000 lb)

    7,710 kg(17,000 lb)

    (Weight must be centered laterally and longitudinally on deck)

  • 0M

    -1M

    -2M

    -3M

    -4M

    1M

    2M

    3M

    4M

    5M

    6M

    7M

    8M

    9M

    10M

    7M 6M 5M 4M 3M 2M 1M 0M

    2292[7’-6”]

    19°

    12.00 x 20TIRES

    400°

    7543[24’-9”] 5588

    [18’-4”] 3912[12’-10”]

    998 kg[2200 lb]

    1338 kg[2950 lb]

    2100 kg[4630 lb]

    1172[3’-10”]

    4267[14’] 8191

    [26’-10”]

    311[12.25”]

    GRNDCLRN

    4091[13’-5”]

    2286[7’-6”]

    3650[12’]

    2000[6’-7”]

    1000[3’-3”]

    4091[13’-5”]

    R4502[R14’-9”]

    R7274[R23’-10”]

    PK8501 Crane Coverage

    LOW FLATDECK CONFIGURATION

    16°

    848[2’-9”]

    2289[7’-6”]

    3391[11’-2”]

    1251[4’-1”]

    400°

    PK8501A

    2085[6’-10”]

    40°

    11M

    0’

    -3.3’

    -6.6’

    -9.8’

    -13.1’

    3.3’

    6.6’

    9.8’

    13.1’

    16.4’

    19.7’

    23’

    26.3’

    29.5’

    32.8’

    36.1’

    23’ 19.7’ 16.4’ 13.1’ 9.8’ 6.6’ 3.3’ 0’

    HIGH FLUSHDECK CONFIGURATION

    4699[15’-5”]

    10.00 x 20TIRES

    HIAB 044-1

    18°

    40°

    380° 0M

    -1M

    -2M

    -3M

    1M

    2M

    3M

    4M

    5M

    6M

    5M 4M 3M 2M 1M 0M

    HIAB 044-1 Crane Coverage

    3412[11’-2”]

    780 kg[1720 lb]

    988 kg[2180 lb]

    820[2’-8”]

    7226[23’-8”]

    3658[12’]

    283[11.15”]

    GRNDCLRN

    2264[7’-5”]

    2502[8’-2”]

    3515[11’-6”]

    1949[6’-5”]

    1775[5’-10”]

    2858[9’-4”]

    1251[4’-1”]

    2000[6’-7”]

    1000[3’-3”]

    3515[11’-6”]

    R3935[R12’-11”]

    R6297[R20’-8”]

    2085[6’-10”]

    16.4’ 13.1’ 9.8’ 6.6’ 3.3’ 0’

    0’

    -3.3’

    -6.6’

    -9.8’

    3.3’

    6.6’

    9.8’

    13.1’

    16.4’

    19.7’

    14

    A64 CRANE-S

    Unloaded Vehicle Weight: 11,800 kg (26,000 lb)

    A64 CRANE

    Unloaded Vehicle Weight: 8,600 kg (19,000 lb)

  • 15

    Service Trucks

    The Getman line of lubrication trucks is built on the A64 Chassis and is engineered to carry fuels, hydraulic oils, engine oils, drill oils and many other service fluids throughout underground mining operations. Getman Lube trucks are engineered with robust design principles allowing them to perform at high levels throughout underground mining operations with minimal downtime and maximum availability.

    All Getman fuel and lubrication trucks can be customized to produce a wide variety of tank configurations, and onboard grease services and air supply are included to enhance product line utility. Individual heavy-duty, self-retracting reels for each service are designed to withstand the most demanding conditions found in underground mining while maximizing worker efficiency.

    Getman Lubrication trucks also focus on protecting worker safety. Work areas are illuminated to ensure maximum visibility during operations, and auto-retract service hose reels reduce worker fatigue and strain.

    DESIGN• Hose reels located at the rear of the machine to facilitate easy

    servicing on either side of the vehicle• Service tanks located on passenger side to minimize

    obstructed rear visibility

    SERVICE TANK FEATURES• Service tank construction with 6 mm (.25 in) plate and internal

    baffles• Service tank fill ports located on each end of the tank for

    flexible operation• Sight gauge level indicators on all service tanks• Easy service tank clean out access for simplified maintenance• Service tanks bolted to frame for easy removal, repair and

    replacement

    DELIVERY FEATURES• Hydraulic powered fluid services with spring return hose reels• 38 L/min (10 gpm) fluid service delivery rate with 15 m (50

    ft) hose• High-pressure, pneumatic powered grease service sized for

    54 kg (120 lb) drum, including hose and reel• Compressed air service using engine-driven compressor or

    higher output hydraulic-driven compressor, including air hose reel

    OPTIONS• Increased diesel delivery rate of 190 L/min (50 gpm) • Wiggins delivery nozzles• Metered diesel and oil delivery nozzles• Remote Wiggins fill for service tanks

  • 1918[75”]

    3658[12’]

    7215[23’-8”]

    311[12.25”]

    GRNDCLRN

    18°

    2292[7’-6”]

    12.00 x 20TIRES

    15 m [50'] GREASEHOSE REEL

    3559[11-8”]

    2083[6’-10”]

    15 m [50'] AIRHOSE REEL

    R3873[R12’-8”]

    R6297[R20-8”]

    3559[11-8”]

    2000[6’-7”]

    1000[3’-3”]

    40°

    TANK CONFIGURATION #3

    416 L [110 GAL]

    TANK CONFIGURATION #2

    1135 L [300 GAL] 810 L [215 GAL]

    (2) 300 L [80 GAL]

    GREASEAIR TANK

    1135 L [300 GAL]

    (3) 300 L [80 GAL]

    TANK CONFIGURATION #4(2) 150 L [40 GAL] 810 L [215 GAL]

    300 L [80 GAL]1135 L [300 GAL]

    7571 L [2000 GAL]

    *TANK CONFIGURATION #1

    2085[6’-10”]

    16

    A64 SERVICE LUBE-S

    A64 SERVICE LUBE

    Unloaded Vehicle Weight: 9,800 kg (21,600 lb)

    Unloaded Vehicle Weight: 11,450 kg (25,000 lb)

    Tank 1 Tank 2 Tank 3 Tank 4 Tank 5

    *Config#1

    7571 L(2000 gal)

    Config#2

    1135 L(300 gal)

    813 L(215 gal)

    302 L(80 gal)

    302 L(80 gal)

    Config#3

    1135 L(300 gal)

    530 L(140 gal)

    302 L(80 gal)

    302 L(80 gal)

    302 L(80 gal)

    Config#4

    1135 L(300 gal)

    813 L(215 gal)

    302 L(80 gal)

    151 L(40 gal)

    151 L(40 gal)

    Tank 1 Tank 2 Tank 3 Tank 4 Tank 5

    Config#1

    1135 L(300 gal)

    813 L(215 gal)

    Config#2

    1135 L(300 gal)

    416 L(110 gal)

    302 L(80 gal)

    Config#3

    813 L(215 gal)

    568 L(150 gal)

    568 L(150 gal)

    *Machine length and turning radius will be affected with Configuration #1

    STANDARD TANK CONFIGURATIONS(Other tank arrangements available upon request)

    STANDARD TANK CONFIGURATIONS(Other tank arrangements available upon request)

  • 17

    Multi-Purpose Vehicles

    The Getman A64 Pallet Handler is a single carrier system designed to perform multiple logistics-related tasks throughout underground mining operations by utilizing application-specific pallets including: personnel carrier pallets, lubrication pallets, material transporter pallets and more.

    Getman Pallet Handler systems allow mines to perform multiple part-time applications with a single carrier, maximizing equipment utilization and return on investment. The Pallet Handler also enhances safety and productivity by allowing pallets to be loaded and unloaded from ground level while the carrier is performing other functions.

    DESIGN• Designed for fast pick up and set down of pallets by a single

    operator seated in the operator’s compartment• Loading, tie-down and unloading of pallets performed at

    ground level• Single control operation with indicator lights showing the

    stage of loading/unloading• Easily accessed PLC control for Pallet Handler loading and

    unloading functions• Roll-on/roll-off pallet loading performed using a single high-

    torque hydraulic motor with double roller chain and shuttle hook

    • Quick couple hydraulic fittings for pallets requiring hydraulic flow

    OPTIONSHiab 044-1 Crane

    • 2-section knuckle crane, mounted on truck frame• 39 kN•m (28,800 ft•lb) class capacity• 4.7 m (15 ft 5 in) outreach• 180° slewing angle

    PALLETSFlat Pallet:

    • 2082 mm × 3658 mm (6 ft 10 in × 12 ft) flat deck• 5,450 kg (12,000 lb) transport capacity on flat deck pallet

    PC Pallet:• 16-person capacity• Padded bench seats with individual seat belts

    Service Lube Pallet:• Hydraulic powered fluid services with spring return hose reels• 38 L/min (10 gpm) fluid service delivery rate with 15 m (50

    ft) hose• High-pressure, pneumatic powered grease service sized for

    54 kg (120 lb) drum, including hose and reel• Compressed air service using engine-driven compressor,

    including air hose reel

    Service Fuel Pallet:• One 5300 L (1400 gal) diesel fuel tank• 38 L/min (10 gpm) fluid service delivery rate with 15 m (50

    ft) hose

    Vacuum Pallet:• Vacuum service package

    › 3596 L (950 gal) sump/waste › 2460 L (650 gal) waste, 1135 L (300 gal) fresh chemical

    • Hydraulic-driven vacuum pump

    Water Sprayer Pallet:• One 4540 L (1200 gal) water tank

  • PC PALLET

    2096[6’-11”]

    GROUND LINE

    FLAT PALLET

    GROUND LINE

    SERVICE FUEL PALLET

    GROUND LINE

    GROUND LINE

    SUMP VACUUM PALLET

    HOSE STORAGE

    3596 L [950 GAL]TANK

    WATER SPRAYER PALLET

    GROUND LINE

    2758[9’-1”]

    2083[6’-10”]

    1194[3’-11”]

    2083[6’-10”]

    2311[7’-7”]

    5300 L [1400 GAL]DIESEL TANK

    2083[6’-10”]

    2083[6’-10”]

    2729[8’-11”] 2148

    [7’-1”]

    4242 L [1200 GAL]WATER TANK

    GROUND LINE

    SERVICE LUBE PALLET

    AIR TANK

    2083[6’-10”]

    151 L [40 GAL]SERVICE TANK

    1135 L [300 GAL]SERVICE TANK

    302 L [80 GAL]SERVICE TANK

    227 L [60 GAL]SERVICE TANK

    AIRCOMP

    PU

    MP

    S/M

    OTO

    RS

    2261[7’-5”]

    3658[12’]

    18

    A64 PALLET HANDLER

    Unloaded Vehicle Weight: 10,450 kg (23,000 lb) Unloaded Vehicle Weight: 11,450 kg (25,000 lb)

    (Machine turning radius may be affected with PC Pallet loaded)

  • 19

    Additional A64 Models

    A64 PERSONNEL CARRIERPassenger capacities of 16 (pictured on right), or 23 persons with protective enclosure for personnel area, padded bench seats and individual seat belts for all passengers. Open or enclosed passenger compartments available.

    DESIGN• Personnel capacities of 16 or 23 persons• Padded bench seats• Individual seat belts• Floor mats• Emergency operator alert buttons• Optional individual suspension seats

    A64 HD PALLET HANDLERHigh-capacity multi-purpose vehicle capable of transporting heavy palletized loads throughout an underground operation.

    DESIGN• 9,070 kg (20,000 lb) pallet capacity for transporting heavy

    loads• Fast loading and unloading of pallets• 2083 × 4267 mm (82 × 168 in) pallet• Multiple application pallets available including: lubricant, fuel,

    vacuum, personnel carrier and more

  • 20

    A64 MECHANICS TRUCKFully customizable operational support vehicle available with knuckle crane, welder, air compressor, tool boxes, clamp vice and multiple other support tools and systems.

    DESIGN• Multiple crane options available• Hydraulic air compressor with reel & delivery hose• Heavy-duty vise• Oxy-acetylene tank storage• Deck-mounted toolbox• Customizable for additional mounted equipment where

    needed

    A64 ExC TRANSPORTERExplosives transport vehicle designed with 2,000 to 5,000 kg (4,400 to 11,000 lb) explosives capacity, and additional storage ensuring that explosives are delivered throughout the mine safely and on time.

    DESIGN• Compact machine envelope for enhanced maneuverability

    between working sections• 2,000 or 5,000 kg (4,400 or 11,000 lb) capacity• Blasting cap and detonator storage• All storage compartments are made with laminated walls to

    prevent accidental detonation from static charge

    A64 BOOM TRUCKHeavy-duty boom/basket utility truck with basket capacities from 225 to 590 kg (500 to 1,300 lb) and boom reaches up to 8.5 m (28 ft).

    DESIGN• 225 to 590 kg (500 to 1,300 lb) basket capacity with fall arrest

    anchor points• Full range of motion for full back coverage up to 8.5 m (28 ft)• Compact frame layout for enhanced maneuverability• Available with additional mounted equipment upon request

    A64 WATER SPRAYERHeavy-duty water spray vehicle for dust suppression throughout underground operations, promoting safety through improved visibility and air quality.

    DESIGN• 7,570 L (2,000 gal) tank capacity• Baffled interior tank design to eliminate massive shifts of tank

    contents• Four nozzle water spray system optimizing spray pattern for

    maximum dust suppression• Configurable spraying system to ensure proper operation in a

    variety of environments

  • 21

    A64 UPHOLE CHARGER

    A64 CABLE STRINGERElectrician’s vehicle designed to install or retrieve cable safely and efficiently utilizing a boom/basket setup and a variable speed, hydraulically driven cable drum.

    DESIGN• Cable spindles can be picked up with hydraulic arms at the

    rear of the truck and transported throughout the mine, or unspooled onto an onboard reel

    • The boom and basket assembly is positioned over the chassis during tramming to reduce stresses on the boom, and to protect the boom and basket in the event of accidental contact with the mine walls

    • Dual boom controls: lower controls at base of boom, upper controls (pilot hydraulic) in man basket

    • Multiple sizes capable of installing cable in headings ranging from 3.5 × 3.5 m (11.5 ft × 11.5 ft) to 6.0 × 6.0 m (19.5 × 19.5 ft)

    • Slow-tramming feature allows the machine to be repositioned with the boom extended

    • Fall arrest anchor points in the man basket

    Bulk explosives loading vehicle equipped with a third-party emulsion pumping package capable of handling up to 8 tons of explosives for large-scale up-hole charging applications. Customizable to meet operational needs and configurable to work with most explosive providers’ systems.

    DESIGN• Available with or without boom and man basket• Customizable to work with preferred emulsion supplier• Bulk explosives loading capability with tank capacities up to

    8 tons• Optional hose pusher

    *customer installed system shown

  • 22

    A64 Performance Data

    0.0

    10.0

    20.0

    30.0

    40.0

    50.0

    0.0 5.0 10.0 15.0 20.0 25.0

    % I

    ncl

    ine

    KPH

    0.0

    10.0

    20.0

    30.0

    40.0

    50.0

    0.0 5.0 10.0 15.0 20.0 25.0

    % I

    ncl

    ine

    KPH

    Manufacturer Mercedes

    Model OM904

    Stage Tier III

    Design 4 Cylinders in line, water cooled

    Max Power 129 kW (173 hp) @ 2200 rpm

    Exhaust System Catalytic exhaust conditioner and silencer

    Aspiration Turbocharged

    Fuel Consumption 220 g/kW-hr (0.361 lb/hp-hr)

    Manufacturer Cummins

    Model QSB4.5

    Stage Tier III

    Design 4 Cylinders in line, water cooled

    Max Power 127 kW (170 hp) @ 2200 rpm

    Exhaust System Catalytic exhaust conditioner and silencer

    Aspiration Turbocharged

    Fuel Consumption 243 g/kW-hr (0.399 lb/hp-hr)

    Speed Chart with Estimated GVW: 13,600 kg (30,000 lb)• Dana Clark 32000 Transmission• Standard Heavy-Duty Carraro 28.43 Axles• 10x20-16pr Mine-Duty tires

    Speed Chart with Estimated GVW: 9,100 kg (20,000 lb)• Dana Clark 32000 Transmission• Standard Heavy-Duty Carraro 28.43 Axles• 10x20-16pr Mine-Duty tires

    0.0

    10.0

    20.0

    30.0

    40.0

    50.0

    0.0 5.0 10.0 15.0 20.0 25.0

    % I

    nclin

    e

    KPH

    1st Gear

    2nd Gear

    3rd Gear

    0.0

    10.0

    20.0

    30.0

    40.0

    50.0

    0.0 5.0 10.0 15.0 20.0 25.0

    % I

    nclin

    e

    KPH

    1st Gear

    2nd Gear

    3rd Gear

    1st Gear

    2nd Gear

    3rd Gear

    Speed Chart with Estimated GVW: 13,600 kg (30,000 lb)• Dana Clark 32000 Transmission• Standard Heavy-Duty Carraro 28.43 Axles• 10x20-16pr Mine-Duty tires

    Speed Chart with Estimated GVW: 9,100 kg (20,000 lb)• Dana Clark 32000 Transmission• Standard Heavy-Duty Carraro 28.43 Axles• 10x20-16pr Mine-Duty tires

    0.0

    10.0

    20.0

    30.0

    40.0

    50.0

    0.0 5.0 10.0 15.0 20.0 25.0

    % I

    nclin

    e

    KPH

    1st Gear

    2nd Gear

    3rd Gear

    0.0

    10.0

    20.0

    30.0

    40.0

    50.0

    0.0 5.0 10.0 15.0 20.0 25.0

    % I

    nclin

    e

    KPH

    1st Gear

    2nd Gear

    3rd Gear

    1st Gear

    2nd Gear

    3rd Gear

    0.0

    10.0

    20.0

    30.0

    40.0

    50.0

    0.0 5.0 10.0 15.0 20.0 25.0

    % I

    ncl

    ine

    KPH

    0.0

    10.0

    20.0

    30.0

    40.0

    50.0

    0.0 5.0 10.0 15.0 20.0 25.0

    % I

    ncl

    ine

    KPH

    Speed Chart with Estimated GVW: 18,150 kg (40,000 lb)• Dana Clark 32000 Transmission• Standard Heavy-Duty Carraro 28.60 Axles• 12x20-28pr Mine-Duty tires

    Speed Chart with Estimated GVW: 13,600 kg (30,000 lb)• Dana Clark 32000 Transmission• Standard Heavy-Duty Carraro 28.60 Axles• 12x20-28pr Mine-Duty tires

    0.0

    10.0

    20.0

    30.0

    40.0

    50.0

    0.0 5.0 10.0 15.0 20.0 25.0

    % I

    nclin

    e

    KPH

    1st Gear

    2nd Gear

    3rd Gear

    0.0

    10.0

    20.0

    30.0

    40.0

    50.0

    0.0 5.0 10.0 15.0 20.0 25.0

    % I

    nclin

    e

    KPH

    1st Gear

    2nd Gear

    3rd Gear

    1st Gear

    2nd Gear

    3rd Gear

    Speed Chart with Estimated GVW: 18,150 kg (40,000 lb)• Dana Clark 32000 Transmission• Standard Heavy-Duty Carraro 28.60 Axles• 12x20-28pr Mine-Duty tires

    Speed Chart with Estimated GVW: 13,600 kg (30,000 lb)• Dana Clark 32000 Transmission• Standard Heavy-Duty Carraro 28.60 Axles• 12x20-28pr Mine-Duty tires

    0.0

    10.0

    20.0

    30.0

    40.0

    50.0

    0.0 5.0 10.0 15.0 20.0 25.0

    % I

    nclin

    e

    KPH

    1st Gear

    2nd Gear

    3rd Gear

    0.0

    10.0

    20.0

    30.0

    40.0

    50.0

    0.0 5.0 10.0 15.0 20.0 25.0

    % I

    nclin

    e

    KPH

    1st Gear

    2nd Gear

    3rd Gear

    1st Gear

    2nd Gear

    3rd Gear

    Mercedes Benz OM904 Engine Package Cummins QSB4.5 Engine Package

  • SHOTCRETE SPRAYING& TRANSPORT

    Copyright © 2014Getman Corporation

    WWW.GETMAN.COM

    MECHANICAL SCALING LOW PROFILE & COAL

    Getman Corporation59750 34th Avenue

    Bangor, MI 49013 USA

    Tel: +1 (269) 427-5611Fax: +1 (269) 427-8781

    www.getman.com