Features & Benefits REFCO products · DIGIMON-CLAMP DIGIMON4-3-PLUS-CLAMP-VAC DIGIMON-VAC . Chapter...
Transcript of Features & Benefits REFCO products · DIGIMON-CLAMP DIGIMON4-3-PLUS-CLAMP-VAC DIGIMON-VAC . Chapter...
Features and Benefits
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 1 von 1 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Features & Benefits REFCO products
Chapter 1 Vacuum Pumps
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 2 von 2 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
RL-series – High-Vacuum pumps
Features and benefits:
High-end materials: Result in low weight and top quality Large and easily accessible oil fill port:
Prevents spillage when filling
Sight glass: For easy viewing of the oil level Special designed oil exhaust filter:
To reduce oil mist
Extremely low point of gravity: Makes tipping over in service van nearly impossible Swiss quality production: Manufactured under ISO 9001
Various spare parts available: Oil basin, oil sight glass, oil mist filter with gasket, rubber pad set, capacitor, switch, housing complete etc.
3 different versions available:
Designation Description Part No RL-2 The compact and lightest 4661083 RL-4 The hard working light weight 4661741 RL-8 Maximum capacity – integrated ball valve 4507348
RL-2
RL-4
RL-8
Chapter 2 Recovery stations
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 3 von 3 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
ENVIRO / ENVIRO-DUO/-OS Recovery stations
Features and Benefits:
New safe for R32 /R 1234yf/R1234ze (ENVIRO-DUO/-OS) Sturdy construction High quality components and assembly One-knob operation Equipped with a self-cleaning mode Dedicated location for the filter dryer and accessory Flat top for easy handling and storing Power cable can be rolled up and is therefore fully protected Powerful – high recovery rate
3 versions available:
Designation Description Part No ENVIRO High performance recovery station 4686345 ENVIRO-DUO High performance recovery station with two piston
compressor, also for R32, R1234yf, R1234ze 4686353
ENVIRO-DUO-OS Same as ENVIRO-DUO but with oil separator 4687035
ENVIRO-DUO
ENVIRO
ENVIRO-DUO-OS
Chapter 2 Charging Scales
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 4 von 4 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
OCTA-series: Electronic charging scales
Features and Benefits:
Thanks to the unique octagonal shape the scale even fit the largest refrigeration cylinders High quality, lightweight, solid aluminium housing High accuracy and resolution (+/- 0.5 %, 2g) Easy to read LCD display, available also wireless Programmable (hold function, alert, etc.) and calibrateable Delivered in durable carrying pouch
Accessories available
Various versions and accessories:
Designation Description Part No REF-METER-OCTA: Electronic charging scale 4679462 OCTA-WIRELESS: As REF-METER-OCTA but wireless, transmits the
measurement data to the wireless display 4686663
REF-METER-OCTA-PLUS: Automatic charging module, stops the charging automatically when the required quantity is reached, suitable for all refrigerants
4681823
REF-METER-OCTA-KIT Combination kit including REF-METER-OCTA and REF-METER-OCTA-PLUS
4681989
10612-REF Support device for liquid filling and charging of refrigerant cans. To screw onto REF-METER-OCTA
4677027
OCTA-WIRELESS-CONTROL-BOX
Control Box for OCTA-WIRELESS 4686752
OCTA-WIRELESS REFMETER-OCTA REF-METER-OCTA-PLUS
REF-METER-OCTA + 10612-REF
Chapter 3 Gauges
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 5 von 5 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Overview Gauges
Chapter 3 Gauges
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 6 von 6 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Bourdon Type
Features and Benefits:
Gauge type M2-series Internal mechanical movement: Bourdon type Nominal size: 63 mm Outside diameter: 68 mm Connection: 1/8“ NPT, bottom connection Housing: Sturdy metal housing
Class: 1.6
Zero point adjustable: Yes
Colour-coded: For easy high side and low side identification
Swiss Movement
Gauge type M5-series Internal mechanical movement: Bourdon type Nominal size: 80 mm Outside diameter: 79 mm Connection: 1/8“ NPT, bottom connection Housing: Sturdy metal housing
Class: 1.0
Zero point adjustable: Yes
Colour-coded: For easy high side and low side identification
Swiss Movement
Gauge type MR-200/-300-series Internal mechanical movement: Bourdon type Nominal size: 63 mm Outside diameter: 68 mm Connection: ¼“ SAE, bottom connection Housing: Sturdy stainless steel housing IP 65
Class: 1.6
Oil-filled: Minimizes needle flutter for more accurate gauge reading. Lubricates mechanical movement for a longer lifetime
Swiss Movement
Chapter 3 Gauges
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 7 von 7 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Gauge type MR-202/-302-series Internal mechanical movement: Bourdon type Nominal size: 63 mm Outside diameter: 68 mm Connection: 1/8“ NPT, bottom connection Housing: Sturdy stainless steel housing IP 65
Class: 1.6
Oil-filled: Minimizes needle flutter for more accurate gauge reading. Lubricates mechanical movement for a longer lifetime
Swiss Movement
Gauge type MR-206/-306-series Internal mechanical movement: Bourdon type Nominal size: 63 mm Outside diameter: 68 mm Connection: ¼“ SAE, bottom connection Ring: Ring for back mounting Housing: Sturdy stainless steel housing IP 65
Class: 1.6
Oil-filled: Minimizes needle flutter for more accurate gauge reading. Lubricates mechanical movement for a longer lifetime
Swiss Movement
Gauge type MR-406/-506-series Internal mechanical movement: Bourdon type Nominal size: 80 mm Outside diameter: 85 mm Connection: ¼“ SAE, bottom connection Ring: Ring for back mounting Housing: Sturdy stainless steel housing IP 65
Class: 1.6
Oil-filled: Minimizes needle flutter for more accurate gauge reading. Lubricates mechanical movement for a longer lifetime
Swiss Movement
Gauge type MR-606/-706-series Internal mechanical movement: Bourdon type Nominal size: 100 mm Outside diameter: 107 mm Connection: ¼“ SAE, bottom connection Ring: Ring for back mounting Housing: Sturdy stainless steel housing IP 65
Class: 1.6
Oil-filled: Minimizes needle flutter for more accurate gauge reading. Lubricates mechanical movement for a longer lifetime
Swiss Movement
Chapter 3 Gauges
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 8 von 8 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Gauge type ++MR-series Internal mechanical movement: Bourdon type Nominal size: 63 mm Outside diameter: 68 mm Connection: ¼“ SAE, bottom connection Ring: Ring for front mounting Housing: Sturdy stainless steel housing IP 65
Class: 1.6
Oil-filled: Minimizes needle flutter for more accurate gauge reading. Lubricates mechanical movement for a longer lifetime
Swiss Movement
Gauge type M2-280/380-series Internal mechanical movement: Bourdon type Nominal size: 80 mm Outside diameter: 79 mm Connection: ¼“ SAE, bottom connection Housing: Sturdy plastic housing
Class: 1.6
Zero point adjustable: Yes
Colour-coded: For easy high side and low side identification
Swiss Movement
Gauge type M2-285/385 Internal mechanical movement: Bourdon type Nominal size: 80 mm Outside diameter: 79 mm Connection: ¼“ SAE, bottom connection Ring: Ring for front mounting Housing: Sturdy plastic housing
Class: 1.6
Zero point adjustable: Yes
Colour coded: For easy high side and low side identification
Swiss Movement
Gauge type M2-286/386 Internal mechanical movement: Bourdon type Nominal size: 80 mm Outside diameter: 79 mm Connection: ¼“ SAE, bottom connection Ring: Ring for back mounting Housing: Sturdy plastic housing
Class: 1.6
Zero point adjustable: Yes
Colour coded: For easy high side and low side identification
Swiss Movement
Chapter 3 Gauges
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 9 von 9 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Gauge type NH-3-100-series Internal mechanical movement: Bourdon type Nominal size: 100 mm Outside diameter: 100 mm Connection: ½“ G, bottom connection Housing: Sturdy metal housing
Class: 1.0
Zero point adjustable: Yes
Colour-coded: For easy high side and low side identification
Swiss Movement
Swiss made
Chapter 3 Gauges
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 10 von 10 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Bellow type Gauges
Gauge type R3-series Internal mechanical movement: Bellow type Nominal size: 60 mm Outside diameter: 69.5 mm Connection: 1/8“ NPT, bottom connection Housing: Sturdy aluminium housing
Class: 1.0
Zero point adjustable: Yes
Colour-coded: For easy high side and low side identification
Oil-filled: Minimizes needle flutter for more accurate gauge reading. Lubricates mechanical movement for a longer lifetime
Swiss Movement
Swiss made
Gauge type R5-series Internal mechanical movement: Bellow type Nominal size: 80 mm Outside diameter: 90 mm Connection: 1/8“NPT, bottom connection Housing: Sturdy aluminium housing
Class: 1.0
Zero point adjustable: Yes
Colour-coded: For easy high side and low side identification
Oil-filled: Minimizes needle flutter for more accurate gauge reading. Lubricates mechanical movement for a longer lifetime
Swiss Movement
Swiss made
Gauge type R7-series Internal mechanical movement: Bellow type Nominal size: 100 mm Outside diameter: 113 mm Connection: 1/4“ SAE, bottom connection Housing: Sturdy aluminium housing
Class: 1.0
Zero point adjustable: Yes
Colour-coded: For easy high side and low side identification
Oil-filled: Minimizes needle flutter for more accurate gauge reading. Lubricates mechanical movement for a longer lifetime
Swiss Movement
Swiss made
Chapter 3 Gauges
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 11 von 11 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Gauge type PM2-series Internal mechanical movement: Bellow type Nominal size: 60 mm Outside diameter: 77 mm Connection: 1/8“ NPT, bottom connection Housing: Sturdy aluminium housing
Class: 1.0
Zero point adjustable: Yes
Colour-coded: For easy high side and low side identification
Swiss Movement
Swiss made
Chapter 3 Gauges
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 12 von 12 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Digital Vacuum Gauge
Features and Benefits:
REF-VAC Easy operation Thanks to the large backlight LCD display, the changing data is always easy to read 7 selectable vacuum units: Micron, mbar, Pa, Torr, mTorr, psi, inHg Conforms to the protection level IP 54 Vacuum range: 0-18000 Microns Accuracy: +/- 10/% 0-100 Microns +/- 6% 101-750 Microns Display resolution: 0-20 : 0.2 Micron 21-200: 1 Micron 201-500: 5 Microns Connection: ¼" SAE Auto shutoff: After 10 min. if vacuum value greater than 18000 Microns. After 30 min. if vacuum value less than 18000 Microns Battery life: 40 hours
Overpressure: 34 bar
Delivered with: T6-4, forged flare branch tee, 3 x ¼“ SAE
Part No 4686712
REF-VAC
Chapter 4 Digital Manifolds
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 13 von 13 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Digital Manifold
Features and Benefits:
DIGIMON-SE/DIGIMON-4 Digital 2- and 4-way manifolds Over 50 refrigerant tables: Including R410A, R744 (CO2), R32 und R1234yf/R1234ze Accuracy class: 1.0 Analogue and digital display Sight glass for easy process viewing Direct calculation and display of superheat and subcool 2 precise K-type temperature sensors Internal and external vacuum sensor
Values can be saved
Backlit LCD display with multiple protection
User-friendly operation
Automatic power-save mode
Low battery indicator
Continuous measuring rate
Spare parts available: Complete valve set, piston including gaskets, sight glass, key for manifold sight glass, handwheels. All parts are easy to replace very long lifetime Swiss Made
DIGIMON-CLAMP
DIGIMON4-3-PLUS-CLAMP-VAC
DIGIMON-VAC
Chapter 4 Digital Manifolds
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 14 von 14 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Spare parts for DIGIMON-SE/DIGIMON4:
Designation Description Part No M4-6-11 Assembly of sight glass, 2 gaskets and
threaded brass ring
4491018
M4-6-11-T Key for manifold sight glass
4493169
M2-10-95-R/2 Complete valve set with 2 gaskets, 2 pcs.
4687104
M4-6-04-R/10 Piston including 2 gaskets, 10 pcs.
4662624
M4-7-SET-B+R Handwheel blue and red (for DIGIMON-SE)
4687396
M4-7-SET-B+N+R+Y
Handwheel blue, black, red and yellow (for DIGIMON4) 4687094
Various versions available:
Part No Designation 2-Way 4-Way 60 inches CA Case K-Type K-Type Vacuum
Manifo ld Manifo ld hose set (5) valves Thermocouple Clamp Gauge
4686735 DIGIMON-SE-8 X X X2
4686736 DIGIMON-SE-3-PLUS X X X X2
4686738 DIGIMON-SE-3-PLUS-CA X X X X X2
4686737 DIGIMON-SE-3-PLUS-CLAMP X X X X2 X2
4686739 DIGIMON-SE-3-PLUS-CLAMP-VAC X X X X2 X2 X
4686740 DIGIMON4-3-PLUS X X X X2
4686919 DIGIMON4-3-PLUS-CA X X X X X2
4686741 DIGIMON4-3-PLUS-CA-CLAMP-VAC X X X X X2 X2 X
Chapter 4 Digital Manifolds
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 15 von 15 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Chapter 4 Analogue Manifolds
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 16 von 16 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Analogue Manifolds
Features and Benefits:
Manifold Apex-Series With premium Bourdon type gauges:
Gauge internals are all brass, no plastic pieces
Body: High quality brass body Class: 1.6 Zero point adjustable Yes
Colour-coded For easy high and low side identification
Spare parts available: Complete valve set, piston including gaskets, sight glass, key for manifold sight glass, handwheels
All parts are easy to replace very long lifetime
Swiss Made
Manifold BM-Series With premium Bourdon type gauges:
Gauge internals are all brass, no plastic pieces
Body: High quality aluminium body Class: 1.6 Zero point adjustable: Yes
Colour-coded: For easy high and low side identification
Sight glass: For easy process control
Spare parts available: Complete valve set, piston including gaskets, sight glass, key for manifold sight glass, handwheels
All parts are easy to replace very long lifetime
Swiss Made
Manifold SM-Series With premium Bourdon type gauges:
Gauge internals are all brass, no plastic pieces
Body: High quality aluminium body Class: 1.0 Zero point adjustable Yes
Colour-coded For easy high and low side identification
Sight glass: For easy process control
Spare parts available: Complete valve set, piston including gaskets, sight glass, key for manifold sight glass, handwheels
All parts are easy to replace very long lifetime
With up to 4 temperature scales: R22, R134a, R404A, R407C
Swiss Made
Chapter 4 Analogue Manifolds
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 17 von 17 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Manifolds M2-/M4-Serie With premium Bellow type gauges:
Gauge internals are all brass, no plastic pieces
Body: High quality aluminium body Gauge housing: Standard Bellow type gauges are made of plastic,
the oil-filled gauges (DELUXE) are made of anodized aluminium
Class: 1.0 Colour-coded: For easy high and low side identification
Sight glass For easy process control
Spare parts available: Complete valve set, piston including gaskets, sight glass, key for manifold sight glass, handwheels
All parts are easy to replace very long lifetime
Swiss Made I
Manifold M2-/M4-Serie, SUPER with „SNAP-ON“ system With premium Bellow type gauges:
Gauge internals are all brass, no plastic pieces
Body: High quality aluminium body Gauge housing: Standard Bellow type gauges are made of plastic,
the oil-filled gauges (DELUXE) are made of anodized aluminium
Class: 1.0 Colour-coded: For easy high and low side identification
Sight glass: For easy process viewing
Spare parts available: Complete valve set, piston including gaskets, sight glass, key for manifold sight glass, handwheels
All parts are easy to replace very long lifetime
Delivered with 8 different temperature scales:
R407F, R22, R410A, R134a, R404A, R407A, R407C, R507 Further temperature scales are available at additional costs
There is only one scale in use: No more mix-up of temperatures
SNAP-ON system: Fast and easy to change the scales
Up to 25 refrigerant scales available
One manifold for all systems
The range will be constantly updated
As soon as new refrigerants appear on the market, only new scales have to be purchased even longer lifetime of REFCO manifolds
Swiss Made
Chapter 4 Analogue Manifolds
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 18 von 18 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Spare parts for all manifolds
Designation Description Part No M4-6-11 Assembly of sight glass, 2 gaskets and threaded
brass ring
4491018
M4-6-11-T Key for manifold sight glass
4493169
M2-10-95-/2 Complete valve set with 2 gaskets, 2 pcs.
4687099
M4-6-04-/4 Piston including 2 gaskets, 4 pcs. 4687092
M2-7-SET-B+R Handwheel blue and red
4687079
M4-7-SET-B+N+R+Y
Handwheel blue, black, red and yellow 4687094
Chapter 4 Analogue Manifolds
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 19 von 19 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Chapter 4 Charging hoses
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 20 von 20 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Charging hoses
Features and Benefits:
REFCO charging hoses ¼“ SAE Colour-coded: For easy high and low side identification Suitable for all common refrigerants High burst pressure: 300 bar/ 4350 psi Supplied with PTFE gaskets: -The lifetime of the PTFE gaskets is at least 10 times longer compared to ordinary rubber - The barb of the hose, as well as the PTFE gasket have been equipped with a newly-invented quick snapper system to prevent falling out of the hose Available sizes: 36“/90 cm, 60“/150 cm, 72“/180 cm In addition to the standard range of hoses REFCO offers a wide range of hoses to fit the needs of various markets Swiss Made
Ball valves for charging hoses
Features and Benefits:
Ball valves Colour-coded for easy high and low side identification High performance shut off valve as per F-gas regulation Sturdy brass construction according to Swiss standards Fits all CL and HCL charging lines Available in various models
CA-1/4“SAE-45° CA-1/2“-20UNF CA-1/2“-20UNF-45°
Chapter 6 Leak Detectors
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 21 von 21 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Electronic Leak Detectors
Features and Benefits
REF-LOCATOR Easy handling Both audible and visual leak detection function Large BTN-LCD display 10 segment colour pie graph showing leak size Quick location due to 3 selectable sensitivity levels
Very high sensitivity as low as 0.7g/year even the smallest leaks can be detected
Extremely accurate for all HFC's, HCFC's and HFO's including R-32 and R1234yf
With UV- and LED lights 3 LED inspection lights guarantee better visibility With the 3 UV inspection lights, UV contrast medium is being made visible No UV-enhancement eyeglasses needed Thanks to the automatic zeroing the REF-LOCATOR can trace leaks in contaminated areas
Flexible wand enables measurements even in difficult-to-access places
For better protection from contaminates the sensor is installed within the leak detectors body and not in the wand tip Higher than average life expectancy of approximately ten years
Certified to Standards SAE-J2791, SAE-J2913, EN14624, Ashrae Standard 173
Delivered in a practical, rugged case including spare filters and a reference leak vial
Spare parts and accessories available: Replacement sensor, test vial, spare filter, spare LED white and spare LED UV Part No 4686714
UV lights LED lights
REF-LOCATOR
Chapter 6 Leak Detectors
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 22 von 22 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Features and Benefits
TRACE-LOCATOR Easy handling Both audible and visual leak detection function Large BTN-LCD display 10 segment colour pie graph showing leak size Quick location due to 3 selectable sensitivity levels
For professional leak detection with trace gas 95/5 (95% nitrogen, 5% hydrogen) The 95/5 trace gas is environmentally friendly , non-toxic, non-flammable and non-corrosive Due to the low density of hydrogen which is lighter than air, even minor leakages can be detected quickly With both UV- and LED light to help find refrigerant leaks 3 LED inspection lights guarantee better visibility With the 3 UV inspection lights, UV contrast medium is being made visible No UV enhancement eyeglasses needed Thanks to the automatic zeroing even the smallest leaks in contaminated areas can be traced
Flexible wand enables measurements even in difficult-to-access places
For better protection from contaminates the sensor is installed within the leak detectors body and not in the wand tip Higher than average life expectancy of approximately 1000 hours
Fulfils the limits of the standard EN35422. The Tracer gas conforms to article 6, paragraph 3 of the EU directive 2006/40/EG, pending SAE-J2970 certification Delivered in a practical, rugged case including spare filters and a reference leak vial
Spare parts and accessories available: Replacement sensor, test vial, spare filter, spare LED white and spare LED UV Part No 4686715
Filter Test vial
TRACE-LOCATOR
Chapter 7 Thermometers
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 23 von 23 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Infrared thermometer
Features and Benefits
LP-88 Practical infrared thermometer with pistol grip Contact free temperature measurement of hot, hazardous, or hard-to-reach surfaces Object won’t be contaminated or damaged Infrared thermometers can provide several readings per second, as compared to contact methods Various temperatures can efficiently be measured within a room The built-in laser pointer simplifies the measurement by marking the measurement area with two red laser pointer Adjustable emissivity
Part No 4686697
Technical Data: Measurement range: -60 to 550 °C (-76 to +1000 °F) Operating range: 0~50°C (32~122°F) Resolution: 0.1°C/0.1°F Accuracy : +/-2% of display or 2°C (4° F), depending
on which is greater Battery life: 18 hours Distance spot: 12:1cm IP classification: 54 Automatic shut-off: After 15 sec. of inactivity Emissivity: 0.95 default – adjustable 0.1 to 1 step .01 Weight: 180 grams (0.4 lbs) including batteries
(AAA*2pcs)
LP-88
Chapter 8 Electronic switches
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 24 von 24 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Electronic switches
Features and Benefits
INVERTER-CHECK-KIT Suitable for most sizes and manufacturer’s air conditioners Instantly analyses compressor or inverter faults - on site Shows up damage on Inverter Output Stage Identifies pcb or wiring faults on Data Link Circuits LED indicators show correct operation Crocodile clips, terminal hook connectors and cable set provided Fits easily into the toolbox
Part No 4678571
INVERTER-CHECK-KIT
Chapter 9 Tube cutters
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 25 von 25 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Ratchet Tube Cutters
Features and Benefits
RS-series Smooth turning of adjustment knob Cuts copper, brass and aluminium tubing Full-stop feed system prevents wheels and rollers from coming into contact Heavy duty, top quality Including spare cutting wheel
Four roller tracking system keeps tube from threading
Versions/spare parts:
Designation Description: Part No RS-16 Tube cutter Ø 3-16 mm 4682722 RS-25 Tube cutter Ø 3-25 mm 4682730
RS-35 Tube cutter Ø 3-35 mm 4682748
RS-42 Tube cutter Ø 3-42 mm 4682756
RS-67 Tube cutter Ø 6-67 mm 4686904
RS-001/3 Replacement cutting wheel for RS-16, RS-25, RS-35, RS-42 and RS-67, 3 pcs.
4687097
RFA-209-01/3 Spare blades for RS-16, RS-25, RS-35 und RS-42, 3 pcs. 4687065
RS-67
RS-42
RS-25
RFA-209-01/3 RS-001/3
Chapter 9 Expander tool
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82 Seite 26 von 26 Industriestrasse 11 Telefax +41 41 919 72 83 6285 Hitzkirch – Switzerland [email protected] www.refco.ch
Hydraulic expander tool kit
Features and Benefits
HY-EX-6 Single hand operation: Hydraulic mechanism and release button make one-handed
swages possible 120° angle: Requires less power to pump, provides a natural wrist angle Small space capable: A compact, pistol shape allows it to fit into the smallest and
hard to reach spots Interchangeable heads: The laser-engraved expander heads can quickly be
identified and fit most common HVAC/R imperial size copper tubing
Compatibility: This tool is also compatible with the most manual and hydraulic expander systems already on the market
Includes sturdy deburring tool RFA-209-STYLO-HD:
Rough edges or burrs can easily be removed prior to expanding the tube
Extremely light-weight Delivered in handy plastic case
Various versions available:
Designation Description Part No HY-EX-6 Expander tool kit with 6 expander heads to cover all imperial size
tubes of 3/8“, 1/2“, 5/8“, ¾“, 7/8“, 1 1/8“ Ø 4687047
HY-EX-6-M Expander took kit, metric for tube sizes of Ø 10 -28 mm 4687303 HY-EX-10 As HY-EX-6 but with 10 expander heads to cover tube size of:
Ø ¼“, 5/16“, 3/8“, ½“, 5/8“, ¾“, 7/8“, 1 1/8“, 1 3/8“ und 1 5/8“ 4687431
HY-EX Expander tool without heads 4687048
HY-EX
HY-EX-6