Fb Flowserve
description
Transcript of Fb Flowserve
-
:: -
:
: Wellford 0.1: May 26, 2015
: 400.0 l/s: 47.00 m: 0.999: 1180 rpm
: 1: ER4522: 12FRBH234
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.
CustomerItem numberServiceFlowserve referenceDate
Pump speedSpecific gravityHeadCapacity
Number of stagesBased on curve no.Pump size & type
: Hydraulic Institute Level BTest tolerance
FlowSelex v2.2Copyright 2009 Flowserve. All rights reserved.
1 of 4
-
Hydraulic Datasheet
: Wellford 0.1: ER4522: 12FRBH234
: May 26, 2015
Pump / StagesBased on curve no.Flowserve referenceDate
/ 1
: -
Customer reference:
Service :
Customer
Item number: Wellford
: 400.0 l/s: -
: -
: 47.00 m: -
: 10.2 m: -
: 0.0 barg
: Fresh water: 16 C: -
: 1.0 cP
: 247 hp: 1180 rpm: 79.5 %
: 6.6 m: 310 hp: 327 hp: 350 hp / 261 kW: 5.8 barg
: 7.9 barg: 12.1 barg
: CI: -
: 538.2 mm: 579.1 mm: 469.9 mm: 8360 US units: 246.9 l/s: 59.22 m: 491.2 l/s: 81.4 %: -
: 92.9 %: 26.0 %
Operating Conditions Materials / Specification
Liquid
Other Requirements
Performance
CapacityWater capacity (CQ=1.00)Normal capacityTotal Developed HeadWater head (CH=1.00)NPSH available (NPSHa)NPSHa less NPSH marginMaximum suction pressure
Liquid typeTemperature / Spec. GravitySolid Size - Actual / LimitViscosity / Vapor pressure
Material column codePump specification
Hydraulic selection : No specification
Hydraulic powerPump speedEfficiency (CE=1.00)
NPSH required (NPSHr)Rated powerMaximum powerDriver powerCasing working pressure(based on shut off and Rated specific gravity @ Cut dia)
Maximum allowableHydrostatic test pressure
Impeller diameterRatedMaximumMinimum
Suction specific speedMinimum continuous flowMaximum head @ rated diaFlow at BEPFlow as % of BEPEfficiency at normal flowImpeller dia ratio (rated/max)Head rise to shut off
Construction : No specificationTest tolerance : Hydraulic Institute Level BDriver Sizing : Max Power(MCSF to EOC)with SFSeal configuration : Single Seal
0.999 /
/ 1.76 kPa.a / 76.2 mm
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.
Est. rated seal chamb. press. : - Total head ratio (rated/max) : 78.9 %
FlowSelex v2.2Copyright 2009 Flowserve. All rights reserved.2 of 4
-
Construction Datasheet
: Wellford 0.1: ER4522: 12FRBH234
: May 26, 2015
Pump / StagesBased on curve no.Flowserve referenceDate
/ 1CustomerCustomer reference
ServiceItem number
:: -
: Wellford:
14 inch
12 inch
Ansi 125#
Ansi 125#
FF
FF
End
Top
: Foot: Radial: Semi-open:4 vanes: Spher/2r: Flood: CW per Hyd. Institute
: Cast Iron:A48 CL35: -
: -
: -
: -
: -
: -
: -
:
: -
: 1564.9 kg: -
: -: 1799.6 kg
/
:: 350 hp / 261 kW: 1.0: -
: -
: -
: -
: -
: Direct on line (DOL): -
: -
: I
: -: -
: -
: -
: -: -
: -
: -: -
: -
: -: -
Ang.ball/2ll
: -
: N/A
Nozzles
Casing mountingCasing splitImpeller typeBearing Type (Rad/Thr)Bearing lubricationRotation (view from cplg)
CasingImpellerCase wear ringImpeller wear ringInducerShaftSleeve
Construction
Materials
Baseplate, Coupling and Guard
Weights (Approx.)
Driver Information
Seal, Gland and Piping
Baseplate typeBaseplate materialCoupling manufacturerCoupling sizeCoupling / Shaft guard
Bareshaft pump(nett)Baseplate(nett)Driver(nett)Shipping gross weight/vol.
ManufacturerPowerService factor (req'st / act)SpeedOrientationDriver TypeFrame-size / materialEnclosureHazardous area classExplosion 'T' ratingVolts / Phase / HzAmps-full load/locked rotorMotor startingInsulationTemperature riseMotor mounted by
ArrangementSize
Material code (Man'f/API)Internal neck bushingGland materialFlushVentDrainAuxiliary sealing deviceSeal flush planSeal flush materialAux seal flush planAux seal flush material
SuctionDischarge
Size Rating Face Pos'n
/-
- /
: Horizontal / Foot
: - /
: - / 0 / -: - / -
: - / -: - / -
/ Mounting
Manufacturer / Type
FlowSelex v2.2Copyright 2009 Flowserve. All rights reserved.3 of 4
-
CustomerItem NumberServiceFlowserve ReferenceDate
:
: -
:
: Wellford 0.1: May 26, 2015 : 400.0 l/s
: 47.00 m: 0.999: 1180 rpm
CapacityHead
Specific gravity
: 1: ER4522: 12FRBH234Pump size & type
Based on curve no.Number of stages
Pump speed
Copyright 2009 Flowserve. All rights reserved. FlowSelex v2.2
4 of 4