Faststack Chimneys Q d - · PDF file0 50 Faststack ® Chimneys Faststack® Chimneys...
-
Upload
truongminh -
Category
Documents
-
view
227 -
download
0
Transcript of Faststack Chimneys Q d - · PDF file0 50 Faststack ® Chimneys Faststack® Chimneys...
80
50
Fast
stac
k® C
him
ney
s
Faststack® ChimneysFaststack® is a new concept in chimney design suitable for both fully working and decorative functions. Faststack® chimneys are easy to install saving both time and money onsite.
Gable End RidgeThe Gable End Ridge chimneys are
designed to allow the brickwork to
continue from the gable wall into the
chimney unit.
Mid Ridge In situations where the chimneys are not
located directly over the gable wall, the
Mid Ridge design can be used.
Mono PitchFaststack mono pitch chimneys can be
located anywhere on the roof pitch.
The Faststack® concept has been developed to make the installation of working and
decorative chimneys simple and cost effective. The compact design enables the installation
of chimneys in situations where traditionally constructed ones would not be possible.
Faststack® Chimneys are fixed to the roof trusses and the built in flashing channels ensures a waterproof seal.
Hearths and fireplaces require no extensive foundations or supporting masonry to support the chimney.
Flues are compact and easy to
install, saving both room space and time on-site.
Quality Assured
Faststack® Chimneys are the first products to meet the requirements of the CGMA.This provides third party performance testing developed with the assistance of the NHBC.
51
What makes Faststack® Chimneys so special?Any roof, any pitch, any location on the roof
Various corbel details available
One piece corners
Freeze-thaw tested
Wind resistance calculations
10 year guarantee
Choice of traditional flaunching
or GRP stone effect capping
Real Clay pots
Certified lifting system
Real brick slips to match
existing facings
Full range of venting options
- Class 1 and Class 2
4mm one piece GRP water
tested core - available in Class O
Innovative flashing channel
Integrated fixing plate
Full installation instructions and
fixing pack included
Not all chimneys are the same... Key Features Key Benefits Faststack®
Real brick slips Will weather traditionally
Certified lifting system Safety is ensured
One piece corners Seamless appearance
Innovative flashing channel Leakproof design
Traditional flaunching or GRP stone capping A range of choices - to suit regional preferences
Corbel detail Adds style
Freeze thaw tested Weatherproof
Wind resistance calculations Ensures stability
Innovative fixing plate Total flexibility
Full venting options To suit any appliance- from gas to solid fuel
Installation instructions - and full fixing pack To ease installation
Full range of chimneys for Can be sited mid ridge, all roof locations gable end and mono pitch
Fast
stac
k® C
him
ney
s
CGMA quality assured
BBA Accreditation expected
mid 2012
The NHBC recommend that only chimneys that are made to CGMA standards or third party accreditations are to be used.NHBC Technical Advice. June 2012
80
52
Faststack® Chimneys
Step 1Delivered to site ready for pointing (on the ground).
Step 2Crane into position on the trusses using the lifting eyes and loops supplied.
Step 3Drill through support plates and screw to trusses using the fixings provided.
Step 4Batten over the support plate as shown and tile the roof.
Step 5Apply the supplied sealant to the channel before and after flashing.
Step 6The lead is then dressed securely into the flashing channel.
Step 7Job done! The finished chimney is in place.
Time saving chimney building in seven easy stepsThe Brickwork Components Faststack® Chimney System is a prefabricated range of ‘working’ and ‘cosmetic only’ chimneys. They are available in a range of standard designs. They comprise GRP (Glass Reinforced Plastic) cores which are clad in traditional facing materials thereby complementing the properties on which they are to be installed.
Our chimneys can be used with most appliances including class 1 multi-fuel stoves
Venting OptionsMany of the chimneys in the range are available as fully working units, suitable for venting both Class 1 & Class 2 appliances. These chimneys include a pre-installed Twinwall flue system selected to suit the particular requirements of the project. Once on site the system is simply linked to the existing flue system using appropriate couplings.
See chart on page opposite for application details.
All our chimneys can
be made using any brick or
stone.
Fast
stac
k® C
him
ney
s
Quality Assured
53
Othello Aragon Hamlet
ShylockSilius
Check to see if the design you like can be positioned on the roof line where you want it situated.
Othello
965mm
220mm
440mm552mm
150mm
15mm
150mm
965mm
220mm
552mm
777mm
150mm
15mm
150mm150mm
150mm
15mm
890mm
965mm
220mm
665mm
1040mm
220mm
150mm
150mm
15mm
665mm1340mm
Hermia
965mm
220mm
150mm
150mm
15mm
777mm
890mm
Version shown for 35º pitch roof. The height of the Shylock chimney varies according to roof pitch.
Time saving chimney building in seven easy steps
Fast
stac
k® C
him
ney
s
Application detailsM
id R
idge
inc.
Tw
inw
all
Flue
sys
tem
Mon
o Pi
tch
inc.
Tw
inw
all
Flue
Sys
tem
Othello 552 x 440mm Y N YApprox. 175kg
Harcourt 665 x 665mm Y Y YApprox. 210kg
Aragon 777 x 552mm Y N YApprox. 210kg
Hamlet 665 x 890mm Y Y YApprox. 220kg
Hermia 890 x 777mm Y Y Y Approx. 250kg
Silius 1002 x 777mm Y Y YApprox. 300kg
Shylock 1340 x 665mm Y N YApprox. 230kg
965mm
220mm
150mm
150mm
15mm
777mm
1002mm
Gab
le E
nd R
idge
inc.
Tw
inw
all F
lue
syst
em
Chi
mne
y St
yle
and
Loca
tion
Harcourt
150mm
15mm
665mm665mm
150mm
965mm
220mm