Trutek Fasteners Private Limited, Noida, Lightweight Anchors
fasteners & fittings - Fasteners... · Drop-In Anchors have an internal thread for use with metric...
Transcript of fasteners & fittings - Fasteners... · Drop-In Anchors have an internal thread for use with metric...
-
DIVIDER INSERT hERE:
fasteners & fittings
fasteners & fittings
fasteners &
fitting
s
-
139Online catalogue: www.anzor.co.nz/arch
ANzOR BOSLOKSTAINLESS STEEL DOWN PIPE WALL CLAMPS
BENEFITS
NZ designed and manufactured
Easy installation - only hand tools required
Very flush, sleek finish for all applications
Available in 304 (ex-stock) or 316 (to order) stainless steel.
Product code: TFCB.
Mounting Brackets
Heavy Wall Plates
Boslok Bracket Strap + Boslok Nuts
Threaded Inserts
Small Nuts - M6Large Nuts - M10 or M12
Small Bracket StrapSizes: 3/8 (10mm OD) - 1 (25mm OD) Strap size 0.7x16mm Large Bracket StrapSizes: 1 (25mm OD) - 6(152mm OD) Strap size 0.7x16mm
OpTION 1 - pLAIN ShANK FOR A cLEAN, MODERN LOOK.
55x90mm diamond shapeLong - 200mm offsetShort - 120mm offsetTool required for installation.Lengths can be trimmed on site with a hacksaw.
Threaded stud
*Alternative option to mounting brackets for fixing wall plate to Boslok strap/nut
ANzOR BOSLOK
+
OpTION 2 - ThREADED ShANK FOR FLEXIBLE ShANK LENGTh
+ +
+
Boslok Bracket Strap + Boslok Nuts
Small Bracket StrapSizes: 3/8 (10mmOD) - 1 (25mmOD) Strap size 0.7x16mm Large Bracket StrapSizes: 1 (25mmOD) - 6(152mmOD) Strap size 0.7x16mm
Small - 50x30mm Large - 55x90mmOther shapes/sizes can be made on request.
Online catalogue: www.anzor.co.nz/boslok
EX-STOcK SUBJEcT TO pRIOR SALE
-
140Online catalogue: www.anzor.co.nz/arch
LAGScREWS - 304 SS
cSK cOAchScREWS - SOcKET DRIVE - 316 SS
code Size
SSHCKW610100 M10 x 100
SSHCKW610120 M10 x 120
SSHCKW610140 M10 x 140
codeSize
( x L) LM
(mm)Lh
(mm)Drive (SW)
(mm)LSM404070 M4 x 70 30 40 None
LSM405080 M5 x 80 32 43 None
LSM406090 M6 x 90 36 50 None
LSM408050 M8 x 50 20 27 None
LSM408080 M8 x 80 32 35 Hex
LSM408100 M8 x 100 37 45 Hex
LSM408130 M8 x 130 40 45 Flat
LSM410080 M10 x 80 20 50 Hex
LSM410100 M10 x 100 32 55 Hex
LSM410140 M10 x 140 50 80 Hex
LSM410150 M10 x 150 48 65 Hex
FASTENERS FOR TIMBER
We carry a wide range of high quality 304 Stainless Steel Lagscrews.
Perfect for securing objects with high sideways loading onto timber. Larger diameter therefore greater shear strength than smaller woodscrews.
FASTENERS FOR TIMBER
Online catalogue: www.anzor.co.nz
-
The complete chemical anchoring range has finally arrived.
141Online catalogue www.anzor.co.nz
FASTENERS FOR cONcRETE
Anzor offers an extensive range of options for fastening to concrete.
Studs for Chemical Anchors
Chemical Anchor Cartridges
Drop-In Anchors
Sleeve Anchors
Wedge Anchors
Flush Head Anchors
Mushroom Spikes
Screw Bolts
FASTENERS FOR cONcRETE
-
142Online catalogue: www.anzor.co.nz/arch
chEMIcAL ANchORS WITh ThREADED STUDS
Hole drilled into concrete
Fischer chemical anchor injected.
FEATURES
No expansion force in base material unlike sleeve anchors.
Greater working load in tension than expandable anchors.
Studs for chemical anchors available in M8, M10, M12, M16 & M20.
One or more of these could be attached to a Threaded Stud.
Round Washer hex Nut S3061 Eye Nut
Dome NutSquare Washer
ATTAchMENT OpTIONS
Recommended Load* Features
Styrene free, low odour For use with a commonly
available caulking gun. Leak proof cartridge for
clean and safe handling. Curing time of 60
minutes at 20 C.
High performance, Styrene free, low odour.
For use with a commonly available caulking gun.
Leak proof cartridge for clean and safe handling.
Curing time of 60 minutes at 20 C.
High performance, Styrene free, low odour.
Leak proof cartridge for clean and safe handling.
Curing time of 45 minutes at 20 C.
High performance, Styrene free, low odour.
Leak proof cartridge for clean and safe handling.
Curing time of 10 hours at 20 C.
NrecM12=8.6kN
NrecM12=14.8kN
NrecM12=14.8kN
NrecM12=17.3kN
POLYESTER (300 mL)(Code: FIS P 300 T)
VINYLESTER (300 mL)(Code: FIS VS 300 T)
VINYLESTER (360 mL)(Code: FIS V 360 S)
EPOXY (390 mL)Code: FIS EM 390 S)
* 20MPa concrete at 110mm (M12, grade 5.8 studs) embedment
Type
POLYESTER
Cheapest resin available
Poorest adhesion
VINYLESTER
More cost effective than epoxy resins
Moderate adhesion
VINYLESTER
More cost effective than epoxy resins
Moderate adhesion
EPOXY
Incredible toughness and bonding strength
FASTENINGS TO cONcRETE
Online catalogue: www.anzor.co.nz
-
143Online catalogue: www.anzor.co.nz/arch
DROp-IN ANchOR - 316 SSDrop-In Anchors have an internal thread for use with metric threaded fasteners (e.g. Hex Bolts) or Threaded Rod (stud). The anchor is placed into a pre-drilled hole in the concrete. A Setting Tool is then used to expand the anchor within the hole.
FEATURES Fast and easy installation.
Fasteners can be removed and replaced.
A Setting Tool is required for installation
Example of a Drop-In anchor application
code Thread SizeAnchor Diameter
(mm)Thread Depth
(mm)Anchor Length
(mm)pull Out Load
(kN)Safe Working
Load (kN)
DYDIM606 M6 8 10 25 9.32 2.32
DYDIM608 M8 10 14 30 13.24 3.30
DYDIM610 M10 12 15 40 19.12 4.78
DYDIM612 M12 16 20 50 28.44 7.11
DYDIM616 M16 20 25 65 47.56 11.89
The test values above were obtained using 20 MPa non aggregated concrete.
cOMMON FASTENERS USED WITh DROp-IN ANchORS
Threaded Stud
hex Setscrew
S3061 Eye Nut countersunk Socket Screw
S3191 Eye Bolt S307 Eye Bolt Button Socket Screw
Drop-In Anchor performance Data
FASTENERS FOR cONcRETE
Online catalogue: www.anzor.co.nz
-
144Online catalogue: www.anzor.co.nz/arch
S306 EyE BOLT - 316 SS
S3061 EyE NUT - 316 SS
Safe Working Load = 25% of Breaking Load
Safe Working Load = 25% of Breaking Load
TEchNIcAL DATA FOR FASTENERS cOMMONLyUSED WITh DROp-IN ANchORS
FASTENINGS TO cONcRETE
codeSize d mm
a mm
bmm
cmm
Dmm
tmm
hmm
hmm
Breaking Load(kgs)
MFEBM606010 6 26 16 5 13 9 31 19 1100
MFEBM608012 8 33 20 6 16 12 40 23 1800
MFEBM610015 10 41 25 8 20 15 49 28 2600
MFEBM612020 12 50 30 10 25 19 61 36 3500
MFEBM616023 16 60 35 13 30 23 72 42 8000
codeSize d mm
a mm
bmm
cmm
Dmm
tmm
hmm
hmm
Breaking Load(kgs)
MFENM606 6 26 16 5 13 4 28.3 13 1,100
MFENM608 8 33 20 6 16 5 33.3 17 1,300
MFENM620 10 41 25 8 20 7 41.5 21 10,500
MFENM612 12 50 30 10 25 9 51 26 3,500
MFENM616 16 60 35 13 30 11 60 30 8,000
MFENM620 20 72 40 16 35 13 71 35 10,500
Online catalogue: www.anzor.co.nz
-
145Online catalogue: www.anzor.co.nz/arch
S3191 EyE BOLT - 304 SS
Safe Working Load = 25% of Breaking Load
code Size mm
Overall Length
mm
Dia. of holemm
Thread Length
mm
MFEBM606040S M6 x 40 48 6 23.2
codeSize mm D1 x A
B mm
cmm
Dmm
Breaking Load(kgs)
S307-06060 6 x 60 54 5 12 1100S307-06080 6 x 80 70 5 12 1100S307-08080 8 x 80 70 6 14 1100S307-08100 8 x 100 90 6 14 1300S307-10100 10 x 100 88 8 16 2600S307-12100 12 x 100 100 10 30 3500S307-12120 12 x 120 105 10 30 3500
Safe Working Load = 25% of Breaking Load
codeSize mm
AxL1B
mmL
mmL2
mmBreaking Load
(kgs)MFEBM406040 6 x 40 13 34 60 1000MFEBM406060 6 x 60 13 54 85 1000MFEBM406080 6 x 80 13 75 105 1000MFEBM406100 6 x 100 13 95 125 1000MFEBM408060 8 x 60 17 50 90 1800MFEBM408080 8 x 80 17 72 110 1800MFEBM4080100 8 x 100 17 90 130 1800MFEBM4080130 8 x 130 17 120 160 1800MFEBM410080 10 x 80 21 70 120 2400MFEBM4100100 10 x 100 21 90 140 2400MFEBM4100120 10 x 120 21 110 160 2400MFEBM4100150 10 x 150 21 140 190 2400MFEBM412100 12 x 100 25 85 150 3500MFEBM412120 12 x 120 25 110 170 3500MFEBM412150 12 x 150 25 140 200 3500
FASTENERS FOR cONcRETE
S307 EyE BOLT - 316 SS
S444 EyE BOLT - 316 SS
Online catalogue: www.anzor.co.nz
-
146Online catalogue: www.anzor.co.nz/arch
hEX NUT SLEEVE ANchOR - 316 SS
S3061 Eye Nut
Attachment Options
countersunk Skt Barrel Nut
FLUSh hEAD SLEEVE ANchOR - 316 SS
code Size hole Size Fastens Material to (mm)
pull Out Load (kN)
Safe Working Load (kN)
DYM606.5040 6.5x40 M5 12 7.85 1.96
DYM606.5060 6.5x60 M5 32 7.85 1.96
DYM608040 8x40 M6 12 11.77 2.94
DYM608065 8x65 M6 36 11.77 2.94
DYM610040 10x40 M8 10 16.67 4.17
DYM610050 10x50 M8 16 16.67 4.17
DYM610075 10x75 M8 40 16.67 4.17
DYM610100 10x100 M8 65 16.67 4.17
DYM612060 12x60 M10 20 24.52 6.13
DYM612075 12x75 M10 32 24.52 6.13
DYM612100 12x100 M10 56 24.52 6.13
The test values above were obtained using 20 MPa non aggregated concrete.
code Size hole SizeFastens Material up
to (mm)pull Out Load
(kN)Safe Working Load
(kN)
DYFHM608070 8x70 M6 30 11.77 2.94
DYFHM610040 10x40 M8 10 16.67 4.17
DYFHM610060 10x60 M8 15 16.67 4.17
DYFHM610080 10x80 M8 35 16.67 4.17
DYFHM610095 10x95 M8 50 16.67 4.17
DYFHM612075 12x75 M10 20 24.52 6.13
The test values above were obtained using 20 MPa non aggregated concrete.
Can swap Hex Setscrew for a Button or Csk Socket Screw or a M6 Joint Connector Bolt as a low profile option.
FASTENINGS TO cONcRETE
countersunk Socket Screw Button Socket Screw
Alternative head Options
M6 Joint connector Bolt
Online catalogue: www.anzor.co.nz
-
147Online catalogue: www.anzor.co.nz/arch
WEDGE ANchOR - 316 SS
S3061 Eye Nutcountersunk Skt Barrel Nut
A Wedge Anchor is a true dimension, stud type expansion anchor - its stud diameter is the same as the hole diameter.
code SizeMin. Embedment
(mm)Fastens Material
up to (mm)pull Out Load
(kN)Safe Working Load
(kN)
DYTM610075 M10x75 50 20 14.71 3.68
DYTM612080 M12x80 50 20 22.56 5.64
DYTM612100 M12x100 60 30 22.56 5.64
DYTM612120 M12x120 60 50 22.56 5.64
DYTM612140 M12x140 60 65 22.56 5.64
DYTM616100 M16x100 70 15 33.34 8.34
DYTM616140 M16x140 80 40 33.34 8.34
DYTM616175 M16x175 80 80 33.34 8.34
DYTM620120 M20x120 85 15 52.96 13.24
DYTM620160 M20x160 100 40 52.96 13.24
ATTAchMENT OpTIONS
The test values above were obtained using 20 MPa non aggregated concrete.
cAST-IN ANchOR
ScREW BOLT - GALV
FEATURES Suitable for brick/concrete/blocks Removable and reusable. Vibration resistant. M10 x 140mm (Product Code: DYBSG10140BT)
other sizes available on request.
Can be installed within 3x diameter - minimum edge distance.
- Approved for 15kN bottom plate bracing, the Blue Tip Galv Screw Bolt gives immediate high strength loading with a shallow embedment.
Cast into concrete tilt slab panels to provide internal threads in the panel.
Made to order (2 week delivery)
Product code: DYDCM6.......
FEATURES
FASTENERS FOR cONcRETE
Online catalogue: www.anzor.co.nz
-
148Online catalogue: www.anzor.co.nz/arch
hEX WAShER FAcE cONcRETE BOLT - 316 SS
FEATURES 316 Stainless Steel (tips are carbide steel). Removable and reusable. Can be installed within 3 x diameter
minimum edge distance. Available in M8 x 80 (DYCB6H08080)
& M10 x 100 (DYCB6H10100).
The Hex Washer Face Concrete Bolt gives immediate high strength loading and is ideal for close-to-edge installation as it can be installed within 3x diameter to edge of concrete.
cSK cONcRETE BOLT - 316 SS
FEATURES 316 Stainless Steel (tips are carbide steel). Removable and reusable. Can be installed within 3 x diameter
minimum edge distance. Allen Key drive. Available in M8 x 80 (DYCB6C08080).
The Csk Concrete Bolt gives immediate high strength loading and is ideal for close-to-edge installation as it can be installed within 3x diameter to edge of concrete.
MUShROOM hEAD SpIKE - 316 SS
FEATURES 316 Stainless Steel (tips are carbide steel). Easy installation. Available in 5mm (DYSM605)
& 6.5mm (DYSM606.5).
Easily driven into drilled concrete. NB: Mushroom Head Spike requires the head to be sheared off to remove from attached material.
FASTENINGS TO cONcRETE
Online catalogue: www.anzor.co.nz
-
149Online catalogue: www.anzor.co.nz/arch
FISchER SXS MASONRy ScREW + SLEEVE
FEATURES
The first plastic plug with European Technical Approval for single point fixings in the cracked concrete tensile zone. Available in 316 Stainless Steel, with countersunk and hex washer face options for timber and metal applications.
pERFORMANcEpermissible loadConcrete B15 : 1.6 kN at 50 mm anchor depth.
perfect in interaction: the cO-NA-screw and the SXS-sleeve.
Safety zone 2: the re-expansion area
When a crack appears in the concrete the re-expansion zone with its extra strong shaped cones provides the active re-expansion of the fischer SXS.
Safety due to 3-zone screw: the cO-NA-screw.
Safety zone 1: the expansion area
By means of the innovative geometry of the thread with distinctive cones the expansion force increases depending on the external loads.
Safety zone 3: the shaft
The maximum screw diameter of the CO-NA-screw is situated exactly in the position of the bearing point. The cross section is about 20 % higher compared with the safety screw with 7 mm.
Doesnt spin round
This feature prevents spinning of the sleeve during installation. While re-expanding it fixes the sleeve in its position.
high pressure in 4 directions
The optimal allocation of the expansion forces to the surface of the bore hole is ensured by the expansion in 4 directions. By this in the cracked tension zone permissible loads up to 1,7 kN axial load have been reached. The permissible shear load amounts up to 3,0 kN. This means a maximum of safety even in an appearing crack.
high flexibility for installation
The CO-NA-screw fits for each application.It is available with counter sunk head and
hexagon head with washer included.
permissible bending moment:316 Stainless Steel (A4): 15.3 Nm
Fischer SXS CSK - Product Code: FSCM6....
Fischer SXS HWF - Product Code: FSHM6....
FASTENERS FOR cONcRETE
Online catalogue: www.anzor.co.nz/fischer
-
150Online catalogue: www.anzor.co.nz/fischer
Suitable substrate materials: Concrete, aircrete, solid sand-lime brick, solid brick, solid clinker, solid pumice brick, hollow pumice blocks, plasterboard, natural stone.
For wooden structures: Fischer SXS-T with Fischer CO-NA countersunk-head screw.Attachment of: square beams, wooden laths, strips, faades and wooden roof constructions.
For metal constructions: Fischer SXS-F US with flat fixing edge and Fischer CO-NA screw with hexagon head and integral washer.For fastening: metal and plastic profiles, door and window frames, insulants, sheet metal, panelling, etc.
CSk TORx SxS FISCHER SCREW
AREAS OF AppLIcATION FOR ThE FISchER SXS ScREW
Size Drill-x Min. drill hole depth
Effect. anchor-age depth
Anchor length
Max. usable length
fischerCO-NA-screws
[mm] [mm] [mm] [mm] [mm] [mm]
M10 x 80 10 90 50 80 30 7 x 87M10 x 100 10 110 50 100 50 7 x 107M10 x 120 10 130 50 120 70 7 x 127M10 x 140 10 150 50 140 90 7 x 147M10 x 160 10 170 50 160 110 7 x 167M10 x 180 10 190 50 180 130 7 x 187M10 x 200 10 210 50 200 150 7 x 207M10 x 230 10 240 50 230 180 7 x 237M10 x 260 10 270 50 260 210 7 x 267
HWF TORx SxS FISCHER SCREW
Size Drill-x Min. drill hole depth
Effect. anchor-age depth
Anchor length
Max. usable length
fischerCO-NA-screws
[mm] [mm] [mm] [mm] [mm] [mm]
M10 x 60T 10 70 50 60 10 7 x 69M10 x 80T 10 90 50 80 30 7 x 89M10 x 100T 10 110 50 100 50 7 x 109M10 x 120T 10 130 50 120 70 7 x 129M10 x 140T 10 150 50 140 90 7 x 149M10 x 160T 10 170 50 160 110 7 x 169M10 x 180T 10 190 50 180 130 7 x 189M10 x 200H 10 210 50 200 150 7 x 207M10 x 230H 10 240 50 230 180 7 x 237M10 x 260H 10 270 50 260 210 7 x 267
T = Hex Washer Face torx, H = Hexagon-Head Screw.
SXS TEchNIcAL DATA
FASTENERS FOR cONcRETE
-
151Online catalogue: www.anzor.co.nz/arch
TEchNIcAL DATA - LOADS
Mean ultimate loads, design resistant and recommended loads for single anchors of Fischer Long-shaft SXS with large axial spacing and edge distance.Anzor only carries in stock - 316 Stainless Steel.
Anchor SizeMaterial Non-cracked concrete cracked concrete
SXS 10 SXS 10
Temperature range: short-term/long-term C 30 / 50 50 / 80 30 / 50 50 / 80
Effective anchorage depth heff (mm) 35 35
Nominate acnchorage depth hnom (mm) 50 50
Drill hole depth h1 > (mm) 60 60
Drill hole diameter d0 (mm) 10 10
Mean ultimate loads Nu (kN)
Tensile
Nu (kN) gvz 12.8 8.3 10.4 6.7
Nu (kN) fvz 6.4 4.2 - -
Nu (kN) 316 12.8 8.3 10.4 6.7
Shear
Vu (kN) gvz 13.8 11.7 13.8 11.7
Vu (kN) fvz 6.9 5.9 - -
Vu (kN) 316 13.8 11.7 13.8 11.7
Design resistant loads NRd (kN)
Tensile
NRd (kN) gvz 3.3 2.2 2.8 1.7
NRd (kN) fvz 1.7 1.1 - -
NRd (kN) 316 3.3 2.2 2.8 1.7
Shear
VRd (kN) gvz 5.0 4.2 5.0 4.2
VRd (kN) fvz 2.5 2.1 - -
VRd (kN) 316 5.0 4.2 5.0 4.2
Recommended loads Nrec (kN)
Tensile
Nrec (kN) gvz 2.4 1.6 2.0 1.2
Nrec (kN) fvz 1.2 0.8 - -
Nrec (kN) 316 2.4 1.6 2.0 1.2
Shear
Vrec (kN) gvz 3.6 3.0 3.6 3.0
Vrec (kN) fvz 1.8 1.5 - -
Vrec (kN) 316 3.6 3.0 3.6 3.0
Recommended bending moment Mrec (Nm)
Mrec (Nm) gvz 16.3 16.3
Mrec (Nm) fvz 10.1 -
Mrec (Nm) 316 15.8 15.8
component dimensions, minimum axial spacings and edge distances
Min. structural component thickness 1) hmin (mm) 100 140 100 140
Min. axial spacing 1)smin (mm) 55 50 55 50
for C (mm) 100 100 100 90
Min. edge distance 1)cmin (mm) 60 60 50 50
for S (mm) 250 200 250 200
* steel failure decisive1) For min. axial spacing and min. edge distance the above described loads have to be reduced!All load values apply for concrete C20/25 without edge or spacing influence.Design resistant loads: material safety factor YM is included. Material Safety factor YM depends on type of anchor.Recommended loads: material safety factor YM and safety factor for load YL - 1.4 are included.
FASTENERS FOR cONcRETE
Online catalogue: www.anzor.co.nz/fischer
-
152Online catalogue: www.anzor.co.nz/arch
Mean ultimate loads and recommended loads of Fischer Long-shaft fixings.
2) The expanding part of the fixing must anchor in the wall of the brick.3) With simultaneous tensile load, the bending moment must be reduced.5) In aerated concrete, the hole should be made using the special punch provided. 6) For hot-dip galvanized safety screws the value has to be reduced by 50%. 9) See product illustration below. 11) And edge distance to non-mortared joints.12) Edge distance to mortared joints only.
Fixing Type SXS 10
Anchorage depth (mm) 50
Drill-hole depth (mm) 60
Drill (mm) 10
Concrete C12/15Nu.m (kN) 12.3 6)
Nrec (kN) 1.6 6)
Solid brick (DIN 105) Mz12Nu.m (kN) 6.5 6)
Nrec (kN) 1.0 6)
Solid sand-lime brick (DIN 105) KS12Nu.m (kN) 12.3 6)
Nrec (kN) 2.0 5)
Hallow block (lightweight concrete, DIN 18151) 2) Hb12 Nu.m (kN) - 11)
Nrec (kN) 0.25
Recommended bending moments 3)zinc plated (Nm) 16.3
316* (Nm) 15.8
Spacings and component dimensions
Fixing Type SXS 10
co
ncr
ete
Single plug 9)Axial spacing a 10 15
Edge spacing ar 8 10
Pair of plugs 9)Axial spacing
ai 5 5
ag 24 30
Edge spacing ar 8 10
Min. component thickness d - 10
Mas
on
ry
Axial spacing a > 10
Edge distancefor loaded masonry 11) ar 10
for non loaded masonry 11) ar 25/3 12)
Min. component thickness d - 11.5
d
a
a
ar
araa
Component dimensions
d
ar
ag
ag
aiai
ai
a) with single plugs b) with a pair of plugs
FASTENERS FOR cONcRETE
* Anzor carries in stock - 316 Stainless Steel only.
Online catalogue: www.anzor.co.nz/fischer