Falcon.pb July 2011

Price Book 2011AEffective July 18, 2011

Effective

July 18, 2011

For a list of available BAA/ARRA compliant products please contact your local SSC or sales representative to see the Ingersoll Rand Security Technologies BAA/ARRA catalog.

Price Book 108AEffective July 18, 2011 • Rev. 7/11

i

General Terms and Conditions of Sale and Service

INGERSOLL-RAND COMPANY, SECURITY TECHNOLOGIES SECTOR, GENERAL TERMS AND CONDITIONS OF SALE AND SERVICE

1. GENERAL. (a) This Agreement contains the terms and conditions by which Company will quoteand sell its Products and Services to Customer. (b) The terms “purchase order” or “order” for the purposes of this Agreement include the term “request for quotation,” as appropriate. (c) This Agreement supersedes all pre-printed and boilerplate terms and conditions set forth in any purchaseorder issued by Customer. (d) No reference herein to Customer’s purchase order will in any way incorporate different or additional terms and conditions which are hereby objected to. (e) ANY ACCEPTANCE BY COMPANY OF CUSTOMER’S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMER’S ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT. (f) Inthe event of a conflict between this Agreement and a purchase order issued by Customer, the terms of thisAgreement will prevail. In the event of a conflict between this Agreement and any specific Product orService terms and conditions, the specific Product or Service terms and conditions will prevail.

2. SCOPE OF PRODUCTS AND SERVICES AND ORDERS.(a) Scope of Products and Services. The scope of the Products and Services (including, but not limited to location) are (i) attached to this Agreement, (ii) separately furnished by Company to Customer, or (iii) subject to Section 1 herein, contained in an order submitted by Customer. Non-standard finishes and special items may be available. Contact Company for such availability. All Products that come in “kits” cannot be sold as individual pieces. See the specific product terms and conditions for exceptions. (b) Orders.All orders submitted by Customer must be in written formacceptable to Company. (c) Receipt of an Order. Company will acknowledge receipt of each order issued in accordance with this Agreement and will notify Customer whether such order has been accepted or rejected, in whole or in part, by Company. If Company fails to acknowledge receipt of anorder, within a reasonable time period, such failure to acknowledge receipt will be deemed a rejection ofthe entire order. (d) Changes to Orders or Cancellation of Orders. Change order request and Cancellations can be by phone, fax, or email. Changes and Cancellations are allowed without penalty ifmade within 48 hours of order receipt if the order has not shipped. Some exceptions do apply - pleaseconsult the factory. After 48 hours, all changes or cancellations are subject to a charge of 25% of the netproduct or service value plus the cost of any fabrication or raw materials that have been purchased for theorder. Unless otherwise specified by Company in writing, any changes to orders acknowledged byCompany that affect the delivery date will be deemed a new order and will require acknowledgement byCompany as provided in this Section 2. The Customer cannot change or cancel credential orders andbiometrics orders once they have been placed. If a change or cancel must occur, then the Customer willpay a penalty to change credential and biometrics orders.

3. PRICES AND PAYMENT. (a) Prices. The prices specified by Company are subject to change,without notice, to Company’s prices in effect at the time of each shipment of Products or performance ofServices. Additional charges may be applied for product modification or engineering services. Oral pricesspecified by Company are null and void. (b) Invoices. Company will submit invoices to Customer stating amounts due. (c) Payment Terms. Payment terms are 2% cash discount 20 days, net35 days from date of invoice. Payment will be made in United States dollars. (d) Credit Terms. All orders are subject to Company’s credit limit and terms of credit required by Company or contained inCompany’s credit application, which is subject to change by Company at any time either before or afterdelivery of any part of the order. Company reserves the right to request payment in advance of shipmentor any order or to request adequate assurances for Customer’s payment of an order and may withhold orstop shipment, without any liability to Company, until Customer submits payment or assurance of payment, as required by Company. (e) Default. If Customer is in default in payment or otherwise withrespect to any order for Products or Services or any other contract with Company, Company shall havethe right, in addition to all other legal remedies and without prejudice to any of its right hereunder, todefer further shipments until such default is corrected and to declare all outstanding bills of Customer tobe immediately due and payable. (f) Taxes.Any taxes, charges, or duties imposed by any governmentalauthority on the sale of Products or Services will be paid by Customer, in addition to the selling pricespecified by Company. (g) Late Payment Charge.A late payment charge of 1.5% per month equivalent to 18% per annum will be charged on past due balances owed Company. Provided however,that in the event that applicable governmental law sets a maximum rate for late payment fees which isless than 18% per annum, then the late payment charge assessed will be set at the maximum rate permitted by law.

4. INSPECTION, DELIVERY, SHIPPING, FREIGHT CHARGES, CLAIMS, AND PACKING.(a) Inspection. Inspection of Products and Services will be done by Customer immediately after receiptof Products or completion of Services. Inspection of Products or Services by Customer at Company'sfacility is not permitted. (b) Delivery. Product delivery schedules are based upon current production capacities, material or component availability, and inventory, and may be changed by Company as conditions require. Service delivery schedules are based upon prompt receipt of, and prompt access to,Customer’s equipment and all information necessary to complete the Services. In no event will Productor Service delivery dates be construed as falling within the meaning of “time is of the essence.” Partialdelivery shall be accepted by Customer and paid for at the price and on the terms stated herein. Any partial delivery of Products or Services, shall constitute a separate sale and payment shall be separatelymade when due. If any part of the Products or Services are not delivered by Company in accordance withCustomer’s order, this Agreement shall not be affected thereby. (c) Shipping. Unless otherwise specifiedby Company, (i) where the Customer is located in the United States, all Products will be sold “UniformCommercial Code, F.O.B. Origin, Company's factory”; and (ii) where the Customer is located outside of the United States, all Products will be sold “ Ex-works, Company's factory (Incoterms 2000).” In either instance, title and risk of loss will pass to Customer upon delivery to thecarrier at Company's factory. Provided however, a security interest will remain in the Products, regardless of mode of attachment to realty or other property, until full payment has been made therefore,and Customer agrees, upon request, to do all things and acts necessary to protect Company’s interest byadequately insuring the Products against loss from damage from any cause and to have Company namedas an additional insured. Copies of all Certificates of Insurance will be provided to Company uponrequest. Customer will also assist Company in providing all necessary documents or signatures required to file any documents to perfect Company’s interest in such Products. (d) Freight Charges. The full cost of freight, via a carrier of our choice, will be allowed (and prepaid) on shipments of the netdollar amount or more indicated in the chart below within the United States of America, excluding all territories.

On shipments of the net dollar amount (Table 1) or more to all foreign countries and US territories, freightwill be allowed (and prepaid) to the Port of Embarkation. Shipments under the net dollar amount will beprepaid by Company and a freight charge percentage of the net invoice amount or $10, whichever is greater,will be added to the invoice. The percentage (Table 2) is based on the National U.S. Average On HighwayDiesel Fuel Prices reported by the U.S. Department of Energy (the “Fuel Index”) calculated as the averageprice in the prior calendar quarter. For example the charge for July 18th 2011 will be based on the averageFuel Index price for the months of April, May and June. All expedited methods of shipment, such as 'nextday air', will be prepaid by Company but the entire shipping costs will be added to the invoice. Companywill ship as requested, freight collect, if the Customer is willing to bear the entire expense and so indicateson the order. Once received by Company, a purchase order cannot be combined with another purchase orderto qualify for freight allowed. In addition the Customer may not combine any of the brands or productcategories listed above on a single purchase order to qualify for freight allowed, except in the case ofFASTRACK. IR FASTRACK may not be combined with Falcon FASTRACK to qualify for freightallowed. Freight Charge percentages and thresholds are subject to change without prior notice. If the FuelIndex rises above $7.50/gallon or there are changes to the thresholds, the above table will be updated. (e)Claims. All claims for loss or damage to Products while in the care, custody, and/or control of a carrierwill be the responsibility of Customer, who will submit any claims. (f) Packing. Company will pack,mark, and ship the Products according to its standard procedures for shipment, unless the parties agree, inwriting, that Company will comply with any special instructions provided by Customer. Compliancewith special instructions may result in an increased price.

5. CLAIMS. Claims due to shortages, errors, omissions, damaged goods, or defective material must besubmitted within 30 days from the date of the invoice.

6. PRODUCT CHANGES. Company reserves the right to change without notice the design of, or theprocess of manufacturing, the Products covered by this Agreement; provided that the foregoing will notbe construed as relieving Company from its obligation to deliver Products which conform to the specifications which Company may have furnished to Customer.

7. PRODUCT RETURNS. Purchased material can only be returned to the factory by obtaining ReturnMaterial Authorization (RMA) and must be returned to Company within 90 days of issuance of theRMA. Returned material must be new, unused, non-obsolete, and non-specially manufactured and beenin Customer’s inventory no more than 180 days from the date of shipment by Company. The RMAnumber, the original invoice number, and the reason for the return must be included in the return. If thecompany approves the return, a credit will be issued to the Customer’s account less freight and ahandling charge of 35% of the net material on the original invoice. Handling charges may vary depending on the condition of the return. The amount of final credit will be determined upon receipt atthe factory and analyzing the condition of the material. Factory retains the right to deny credit toanyone for any reason.

8. TECHNICAL INFORMATION AND ADVICE. (a) All designs, data, and specifications provided by Company are proprietary and will not be disclosed or reused by Customer without the priorwritten consent of Company. (b) Company assumes no obligation or liability for any advice given byCompany, the results obtained, or damages incurred, and all such advice is given and accepted at Customer’s risk.

9. INTELLECTUAL PROPERTY OWNERSHIP.

Nothing herein is a grant or license or right under any specific patent or intellectual property asset of ither party. With regard to intellectual property ownership, all intellectual property and related intellectual property rights (hereinafter “IP”) owned by one party before the date of this Agreement willremain owned by that party. All IP conceived, developed, or reduced to practice as part of thisAgreement after the date and during the term of this Agreement shall be owned by the party creating the intellectual property if created by one party without the benefit of the other party’s IP. All IP createdjointly will be owned by the parties jointly, in direct proportion to monetary contribution. The party that has a majority interest shall manage the jointly owned IP. Neither party shall disclose any of theother party’s IP to a third party without prior written consent. All intellectual property and related documents which are confidential shall remain subject to the terms and conditions of this Agreement for twenty (20) years from its effective date, unless such information is made public before this time expires.

10. LIMITED WARRANTY.

(a) Company's Standard Limited Warranty(ies) relating to Products or Services are applicable to thisAgreement. The limited warranty(ies) are (i) attached to this Agreement; (ii) separately identified in the specific Product Price Book; or (iii) separately furnished by Company to Customer. (b) (i) In theevent that certain Product warranties are not attached to this Agreement or separately furnished,Company warrants only to Customer that Products will be free from defects in material and

11-5/1

Brand Net Dollar Amount

Schlage Mechanical $7,000

Schlage Electronic Security (excluding Biometrics, Software, $7,000Controllers, Readers & Credentials)

Schlage Biometrics, Readers &Credentials

Freight Charges Apply

Schlage Software & Controllers Freight Charges Apply

Von Duprin $7,000

LCN $7,000

IR FASTRACK $7,000

Falcon Locks $5,000

Falcon Exits $5,000

Falcon Closers $5,000

Falcon FASTRACK $5,000

Ives & Glynn-Johnson $1,000

Steelcraft Refer to separatefreight terms

Table 1: Freight Minimums

U.S. Average On-highway DieselFuel Price ($/Gallon)

At But Less FreightLeast: Than: Charge

$0.00 $2.99 3.0%

$3.00 $3.49 3.4%

$3.50 $3.99 3.5%

$4.00 $4.49 3.6%

$4.50 $4.99 3.7%

$5.00 $5.49 3.8%

$5.50 $5.99 3.9%

$6.00 $6.49 4.0%

$6.50 $6.99 4.1%

$7.00 $7.49 4.2%

Table 2: Freight Rate (minimum $10.00)

Price Book 108AEffective July 18, 2011 • Rev. 7/11ii

General Terms and Conditions of Sale and Service

workmanship for a period of 12 months from the date of shipment of the Products. CO-Series locks,AD-Series locks, AD-Series Reader Modules, WPR400, WRI400, WSM400 TK400, CT5000,PIM400, PIM401, PIB300, and PIB301 will be warranted for a period of 12 months from thedate of installation, not to exceed 24 months from the date of shipment from the factory.Company’s sole obligation under this warranty is limited to repairing or replacing, at its option,the defective

Products. (ii) The provisions of this limited Product warranty do not apply to Products: (A) usedfor the purposes for which they are not designed or intended;

(B) which have been repaired or altered without Company's prior written consent; (C) whichhave been subjected to misuse, abuse, negligence, or accident; (D) which have been improperlystored, installed, maintained, or operated; (E) which have been used in violation of writteninstructions provided by Company to Customer; (F) which have subjected to impropertemperature, humidity, or other environmental conditions; (G) which have been affected bynormal wear and tear; or (H) which, based on Company's examination, do not disclose toCompany's satisfaction nonconformance to the warranty.

(c) (i) In the event that certain Service warranties are not attached to this Agreement or separatelyfurnished, Company warrants only to Customer that the Services will be free from defects in material and workmanship for a period of 6 months from the date of completion of the particularitems of Service.Company’s sole obligation under this warranty is limited to repairing or replacing, atits option, the defective Products. (ii) The provisions of this limited Product warranty do not apply toProducts: (A) used for the purposes for which they are not designed or intended; (B) which have beenrepaired or altered without Company's prior written consent; (C) which have been subjected to misuse,abuse, negligence, or accident; (D) which have been improperly stored, installed, maintained, or operated; (E) which have been used in violation of written instructions provided by Company to Customer; (F) which have subjected to improper temperature, humidity, or other environmental conditions; (G) which have been affected by normal wear and tear; or (H) which, based on Company'sexamination, do not disclose to Company's satisfaction nonconformance to the warranty.(c) (i) In the event that certain Service warranties are not attached to this Agreement or separately furnished, Company warrants only to Customer that the Services will be free from defects in materialand workmanship for a period of 6 months from the date of completion of the particular items of Service. Company’s sole obligation under this warranty is limited to repairing or reperformance, at itsoption, of the Service; provided however, if repair or reperformance is either impractical or impossible,the Company will refund to Customer that portion of the price paid to the Company for the defectiveitem of Service. This warranty only applies if the company is given written notice of the defect or nonconformance by the Customer within 30 days of discovery. (ii) The provisions of this limited Service warranty does not apply to any defects or issues with the design or performance of equipmentor products not manufactured by Company, nor does it apply to any code compliance or permit requirements for the assembly, installation, erection, or construction of any goods.

(d) NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TOTHE PRODUCTS OR SERVICES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIEDWARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

(e) The following costs and expenses are not covered by the provisions of these limited warranties: (i) labor costs for the removal and reinstallation of Products or other manufacturer’s products; (ii) shipping and freight expenses required to return Products to Company; (iii) normal maintenance;and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anythingother than defects in Company’s material (products only) or workmanship.

11. CUSTOMER'S REMEDIES. THE CUSTOMER'S EXCLUSIVE AND SOLE REMEDYON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF PRODUCTS OR SERVICES THAT DO NOT CONFORM TO THIS AGREEMENT WILL BE TO (A) SECUREREPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR ORREPERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICEPAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENTWILL THE COMPANY'S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FORTHE PRODUCTS OR ITEM OF SERVICE.

12. LIMITATION OF LIABILITY. IN NO EVENT WILL COMPANY BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, INTEREST, LOST GOODWILL, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION, OR CLAIMS OF CUSTOMER'S CUSTOMERS, WHETHER BASED ONCONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IFADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

13. STATUTE OF LIMITATIONS. NO ACTION ARISING OUT OF ANY CLAIMEDBREACH OF THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMERMORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.

14. CONSUMER PRODUCTS.With respect to “consumer products” as defined under the Magnuson-Moss Warranty Act (“MMWA”), the following statements are made. (a) Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply toyou. IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITEDTO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 10 ABOVE. (b) Somestates do not allow the exclusion or limitation of incidental or consequential damages, so the abovelimitation or exclusion may not apply to you. (c) This warranty gives you specific legal rights and youmay also have other rights which vary from state to state.

15. FORCE MAJEURE. Any delay or failure of Company to perform its obligations hereunder willbe excused to the extent that it is caused by an event or occurrence beyond its control such as, by way of example and not by way of limitation, acts of God, actions by any governmental authority (whethervalid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms,explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, but not limitedto, lockouts, strikes, and slowdowns) at Company's facility, its source plant or their suppliers, inabilityto obtain power, material, labor equipment, or transportation, or court injunction or order. The deliverydate will be extended for a time equal to that of the delay and the schedule for Company’s performance

will be deemed adjusted in the individual order(s) to that effect.

16. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with any attachmentsor supplements specifically referenced in this Agreement, constitutes the entire agreement between theparties hereto and supersedes all previous communications, representations, or agreements, either oralor written, between the parties hereto with respect to the subject matter hereof. No agreement or understanding varying or expanding this Agreement will be binding upon either party hereto unless it is in writing and signed by a duly authorized representative thereof.

17. TERMINATION. (a) This Agreement may be terminated by either party by giving 30 days' written notice to the other party in the event of failure by such other party to fulfill any of its obligations hereunder. However, if during the period of such notice, such other party remedies such failure, this Agreement will continue with the same force and effect as if such notice had not beengiven. (b) This Agreement may be terminated upon the written mutual consent of the parties. (c) Eitherparty may immediately terminate this Agreement by giving written notice to the other party in the eventof the happening of any of the following or any other comparable event: (i) insolvency of the otherparty; (ii) filing of a petition in bankruptcy by or against the other party; (iii) appointment of a receiveror trustee for the other party; or (iv) execution of an assignment for the benefit of creditors by the otherparty, all of which will allow Company to demand reclamation of all affected orders. (d) Except asprovided in this section 17, Customer may not terminate this Agreement, in whole or in part, unlessCompany’s prior written consent is obtained and Customer agrees to pay all of Company’s cancellationcharges.

18. GOVERNING LAW; VENUE; AND EXPENSES. (a) This Agreement and any disputes or controversies arising hereunder will be governed by and construed according to the internal laws of the State of Indiana, United States of America, without regard to its conflict of law principles, and notincluding the United Nations Convention on Contracts for the International Sale of Goods. (b)Jurisdiction and venue with respect to any action, proceeding, or suit in connection with this Agreementwill reside in the courts of the State of Indiana. (c) Customer agrees to pay for all expenses (includingattorney’s fees) incurred by Company in enforcing the obligations of Customer under this Agreement.

19. COMPLIANCE WITH LAWS, EXPORT CONTROLS, CERTIFICATIONS, AND NUCLEAR LIABILITY. (a) This Agreement is subject to, and Company and Customer will comply with, all laws and export controls, regulations, rules, orders, licenses, requirements, and governmental requests now or hereafter in effect in the United States of America that pertain to theProducts or the initial sale of the Products or that pertain to Services. Provided however, Company isnot responsible for obtaining or maintaining any permits for the performance of Services or the verification or compliance with any code requirements relative to the performance of Services. To theextent any sale of Products or Services pursuant to this Agreement may require approval of the U.S.Government, Company’s obligations under this Agreement are conditioned upon the grant of such approval and upon compliance by Customer with any restrictions imposed by the U.S. Government inconnection with such approval. (b) Certain Products are noted by Company as tested by independentlaboratories for compliance with UL and/or ANSI standards. Any and all modifications or alterations to such Products will void such certification, and Company is not liable to Customer to certify any modified or altered Product. (c) In the event the Products are to be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or governmental indemnity protecting Company against liability. The Customer hereby releases and agrees to indemnify Company and itssuppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out ofthe nuclear incident, whether alleged to be due, in whole or in part by Company or its suppliers.

20. NO INDUCEMENTS. The parties hereto represent to each other and each agrees that, neither itnor any person acting on its behalf has, in contravention of any applicable law, given or offered to give,or will give or offer to give, any sum of money or other material consideration to any person, directly orindirectly, as an inducement to obtain business hereunder or to influence the granting of licenses orother governmental permissions to enter into this Agreement or perform obligations hereunder.

21. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or unenforceable under any statute, regulation, ordinance, executive order, or other rule of law, that provision will be deemed severed to the extent necessary to comply with such statute, regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate ingood faith to arrive at an alternative arrangement approximating the original business objective of theparties. The remaining terms and conditions of this Agreement will remain in effect.

22. NO IMPLIED WAIVER. The failure of either party at any time to require performance by theother party of any provision of this Agreement will in no way affect the right to require such performance at any time thereafter, nor will the waiver of either party of a breach of any provision ofthis Agreement constitute a waiver of any succeeding breach of the same or any other provision.

23. MISCELLANEOUS. (a) This Agreement does not constitute either party the agent or legal representative of the other party. Neither party is authorized to create any obligation on behalf of theother party including, but not limited to, the obligation for payment of any service or warranty obligation hereunder. (b) Neither this Agreement nor any right or obligation hereunder may be transferred or assigned by either party without the prior written approval of the other party, except thatCompany can transfer or assign this Agreement or any right or obligation (including, but not limited tothe right to receive payments for any orders) to Ingersoll-Rand Company or an Ingersoll-Rand Company entity without first obtaining Customer’s consent. (c) The rights and remedies herein reservedto Company will be cumulative and additional to any other or further rights and remedies provided atlaw or equity. (d) Customer does not have the right to setoff or to back charge against any amountswhich become payable to Company under this Agreement or otherwise. (e) The official text of thisAgreement is in the English language. If this Agreement is translated into another language, the Englishtext will govern any question with respect to interpretation. (f) The headings in this Agreement are forconvenience of reference only and do not affect the meaning of this Agreement in any manner.

24. DEFINITIONS. (a) “Agreement”means Ingersoll-Rand Company, Security Technologies SectorTerms and Conditions of Sale and Service. (b) “Company” means Ingersoll-Rand Company, SecurityTechnologies Sector. (c) “Customer”means the Buyer. (d) “Buyer”means the purchaser of productsor Services from Company. (e) “U.S.” means United States of America.

11-5/2


Table of Contents

1

Alphabetical Index

B Series Key-in-Lever.................B-1 – B-8

D Series Deadlocks100 Series......D100-1 – D200-10200 Series......D100-2 – D200-10

H Series Interconnected ............H-1 – H-6

MA Series Mortise................MA-1 – MA-14

RU Series Unit Lock Retrofit..RU-1 – RU-12

T Series Key-in-Lever................T-1 – T-10

W Series Key-in-Lever / Knob..W-1 – W-8

X Series Key-in-Knob.................X-1 – X-8

Y Series Key-in-Knob/Lever .......Y-1 – Y-6

Miscellaneous Information.............................................2Finishes .............................................................................3Freight Weight Chart .......................................................4Forms and Examples ......................................................8Product Index ........................................................Index-1

Product Type Index

Mortise Locksets

Knob Trim..................................................................MA-5Lever Trim....................................................MA-5 – MA-6Trim Packages.........................................................MA-14Full Body Deadlocks ..............................................MA-15

Key-in-Lever Locksets

Grade 1 Cylindrical .......T Series.................................T-3Grade 2 Cylindrical .......B Series ................................B-3Grade 2 Cylinder ...........W Series..............................W-4Grade 2 Tubular.............Y Series ................................Y-3

Key-in-Knob Locksets

Grade 2 Cylindrical .......W Series..............................W-5Grade 1 Cylindrical .......X Series................................X-3Grade 2 Tubular.............Y Series ................................Y-3

Interconnected Locksets

Grade 2...........................H Series................................H-3

Retrofit Products

Unit / Pre-Assembled....RU Series ..........................RU-3

Deadlocks

Grade 1 Tubular.............D100 Series ...................D100-3Grade 2 Tubular.............D200 Series ...................D200-3

Auxiliary Products

Padlocks and Keyed Locking Cables ...................MSC-3Mounts ..................................................................MSC-11Cabinet Locks .......................................................MSC-10

Cylinders, Keys and Keying

Conventional ............................................................CYL-2Interchangeable Cores............................................CYL-7Keys and Key Blanks...............................................CYL-8Keying Charges......................................................CYL-10Parts and Service Equipment ..............................CYL-13Pins and Pin Kits....................................................CYL-16Service Equipment & Supplies............................CYL-17Construction Core Program.................................CYL-11

Forms

Master Keying ................................................................15

LOCKS FOR THICK DOORSMany Series of Falcon locks are available for doors over 1-3/4" thick. Consult the options section for each series for available doorthicknesses and charges.

LEAD-LINING OR LEAD-WRAPPINGT and RU Series locksets and latchsets are available lead-lined. MA Series locksets are available lead-wrapped. Consult the optionssection for each series for availability and charges.

ABRASIVE COATING AND KNURLINGAbrasive coated or knurled knobs or levers are available for most Falcon locksets and latchsets. Consult the options section for eachseries for availability and charges.

MOUNTED LOCK SAMPLESIndividual mounted samples are available for all lock series. The samples are mounted on a mount block and are fully operative thusallowing demonstration of each functions’ individual features. There is a nominal charge for the mount block. There is no charge formounting of the hardware. See MSC-11 for mount selection.

SET OF FINISH SAMPLES One (1) of each finish on 1-1/4" diameter disks attached together with a bead chain.

Finishes Included: 605, 606, 613, 625, 626 & 630 Contact your SSC representative for availability

COMPETITORS’ KEYWAYSA selection of standard keyways of other lock manufacturers is available as listed below (6-pin only). Consult options sections ofeach series for availability. (Not available in any mortise and rim cylinders, except Schlage C, or factory master keyed.) Furnished 0-Bitted unless otherwise specified.

INTERCHANGEABLE CORESThe “A” keyway is standard for IC products and will be supplied unless otherwise specified. A, B, C, D, DD, E, F, G, H, J, K, L, M,N, Q, R, TB, TD are equivalent to Best and Arrow IC keyways of the same names. Consult IR Mechanical Safety Customer Servicefor restricted keyways not listed here. Conventional cylinders are not compatible with interchangeable core.

COMPETITORS’ CORESFalcon standard IC preps accept Arrow (including Flex-Core), Best (including PKS and Peaks), InstaKey, Kaba Peaks, Keymark andKSP cores. Other brands of interchangeable cores are compatible with T and RU Series locksets. See those sections for details.

CONVENTIONAL CYLINDERSThe “G” keyway is standard for conventional cylinder products and will be supplied unless otherwise specified. E, H, K, L, N and Pare also available. Consult IR Mechanical Safety Customer Service for restricted keyways and other keyways not listed here.

* Interchangeable core not compatible with conventional cylinders

Miscellaneous Information

Manufacturer Keyway Keying Options

60 O Bitted, KDCorbin Russwin L4 O Bitted, KA4Russwin

D1 O Bitted, KDSargent LA O Bitted, KD

Schlage C O Bitted, KD, KA4E O Bitted

Yale 8 (Para) O Bitted, KD


FINISHESAlthough we apply the finest available protective plating and/or enamel coating to the surface of our products, these finishes havelimitations and in time may deteriorate either from exposure to weather, pollution, perspiration, extremes of climate, frequency ofuse or other factors. Deterioration of these finishes is, therefore, not a defect, but a normal process which is unavoidable. OurCompany cannot accept responsibility for finish deterioration in these circumstances and therefore the finishes cannot be guaranteed.These products will not be refinished or replaced under our warranty should deterioration of finishes occur.

Some finishes are not suggested for areas that are subject to corrosive climate or chemical conditions. We recommend chrome platedor stainless steel finishes for these areas.

* 605 Finish is not recommended for corrosive climates.

** Oil rubbed bronze (613) is considered a category “B” finish by ANSI/BHMA and will vary in color when applied to different

alloys and forms of base material. 613 will also vary from production lot and additionally from one manufacturer to another. Oil

rubbed bronze will wear off over time due to the “rubbed” finishing method that has no protective coating or plating.

Please refer to price columns for each lock series for finish availability.

HOW TO SPECIFY FINISHES

STRAIGHT FINISHES: When the finish is to be the same for both sides of the door.

EXAMPLE: 40 EA. 511HG 626

SPLIT FINISHES: Finish may vary from one side of the door to the other.

EXAMPLE: 40 EA. X301TG 606 x 625 (Outside finish is always specified first)

Schedule of Finishes Ordering Format

ANSI/BHMAFinish U.S. StandardCode Code Description

605* 3 Bright Brass - Clear Coated606 4 Satin Brass - Clear Coated613** 10B Satin Bronze; Dark Oxidized and Oil Rubbed625 26 Bright Chromium626 26D Satin Chromium630 32D Satin Stainless Steel


3


Freight Weight Chart

4

Case Avg. Wt.Lock Series Functions Trim Quantity per Case

161 341 501511 561 581 18 lbs.

611 D Q 4B101 301 17 lbs.

12 10 14 lbs.111 151 33 lbs.

D100 121 - 20 31 lbs.131 43 lbs.

211 251 30 lbs.

D200221 231

- 2034 lbs.

261M 18 lbs.271 22 lbs.

H 101 451 461 E H 4

16 lbs.511 D 16 lbs.

451 521 531 AN DN QN SN 32 lbs.541 561 571581 851 881 AG DG QG SG 28 lbs.

371 381 411 AN DN QN SN 37 lbs.431 441 AG DG QG SG 33 lbs.

101 161AN DN QN SN 32 lbs.AG DG QG SG 28 lbs.MA

301 311 321AN DN QN SN

432 lbs.

AG DG QG SG 28 lbs.

12AN DN QN SN 16 lbs.AG DG QG SG 12 lbs.

18 AN DN QN SN16 lbs.

AG DG QG SG451 521 531 HG 24 lbs.541 551 561 571581 851 881 HN 25 lbs.

371 381 411 HG 26 lbs.431 441 HN 27 lbs.

101 161HG 21 lbs.

MA HN 4 22 lbs.

301 311 321HG 23 lbs.HN 24 lbs.

12HG 10 lbs.HN 11 lbs.

18 HG 20 lbs.HN 21 lbs.

Mortise911 931 21 lbs.

Deadlocks 921 - 4 22 lbs.941 20 lbs.

Case Avg. Wt.Lock Series Functions Trim Quantity per Case

501 511 52121 lbs.

RU561 571 581381 411 851 D Q 4

22 lbs.881101 301 20 lbs.

291 351 381 411501 511 521561 571 581 A D Q 4 20 lbs.

T 851 881101 301

12 10 18 lbs.501 511 581 36 lbs

56110

37 lbs.W Levers 101 201 301 D Q 34 lbs.

161 27 lbs.12 24 29 lbs.

501 511 581 21 lbs

W Knobs561 D Q 10 22 lbs.

101 301 19 lbs.12 24 10 lbs.

501 511 521 EG HG TG 10 29 lbs.561 571 581 EY HY TY 6 19 lbs.

411 EG HG TG 10 30 lbs.EY HY TY 6 20 lbs.

X 101 EG HG TG 10 27 lbs.EY HY TY 6 18 lbs.



521 561 581 27 lbs

Y Levers101 161 D Q 12 24 lbs.

301 25 lbs.12 20 15 lbs.

521 561 581 10 16 lbsY Knobs 101 161 301 E H 14 lbs.

12 20 10 lbs.1" Shackle 18 lbs.

Padlocks 2" Shackle - 18 21 lbs.6" Shackle 24 lbs.

985 8 lbs.956 986 9 lbs.

957 987 250 10 lbs.Conventional 988 - 20 11 lbs.

Cylinders 990 13 lbs.965 966 973974 992 985T 15 lbs.

986T986 987 996 7 lbs.261 264 952953 976 977 8 lbs.

Mortise and 997Rim Cylinders 988 - 20 9 lbs.

262 265 10 lbs.990 11 lbs.992 13 lbs.

942 943 945 12 lbs.Cabinet Locks 959 - 20 13 lbs.

979 14 lbs.Mail Box Lock 982 20 5 lbs


5

WHERE TO SEND ORDERS

Type of Order Fax No. Mailing Address

888-840-7732 (West)Falcon Lock

Factory888-840-7735 (East)

3899 Hancock ExpresswaySecurity, CO 80911877-671-7011

PRODUCT IDENTIFICATION CODING

Latch Suffix

D DeadlatchS Springlatch

Cylinder Suffix

P 6 pin cylinder, keyed to 5 chambersL Less cylinderB Less SFIC

BDC Disposable construction core (SFIC)**

J FSIC core prep (competitor’s full-size IC, designate competitor in “Additional Details” of Order Form)

G SFIC (Old Falcon designation = WIC)H Construction Core SFIC (brass, keyed)

BB Best Syle Capped Core (SFIC)CP6 Schlage C Keyway

Trim and Chassis Prefix

6 Abrasive Lever (6DA = Dane Lever x abrasive strip)8 Knurled (8TG = Troy-Gala knob trim x knurled lever or knob)9 Lead-Lined (9AV = Avalon lever x lead-lining of levers (and/or chassis)

XCCorrosion resistant chassis (XC561 = X corrosion resistant chassis, classroom function)*

* X Series chassis only.

** SFIC = Small format interchangeable core

Note 1) Failure to use the above fax numbers or mailing address will delay processing of your order.


To order Falcon products, descriptive data should be in the same sequence as shown:

LINE OUTSIDE INSIDE DR ADDITIONAL

ITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE THK EXT DIM DETAILS

1 2 3 4 5 6 7 8 9 10 11 12 13 14

1. LINE ITEM: Line item number2. QTY: Quantity3. PRODUCT: Complete lock product or part number4. OUTSIDE DES: Outside design code5. OUTSIDE FIN: Outside finish code6. INSIDE DES: Inside design code. Leave blank if same as outside design code.7. INSIDE FIN: Inside finish code. Leave blank if same as outside finish code.8. HAND: Hand of door. Only one hand allowed per line item.

Example: RH = Right Hand, LH = Left Hand, RHR = Right Reverse, LHR = Left Reverse.

9. LATCH: Latch. Leave blank for standard or specify part number if non-standard latch is required. LLL = Less Latch.

10. STRIKE: Strike. Leave blank for standard or specify part number if non-standard strike is required.LLL = Less Strike.

11. DR THK: Door Thickness. Enter door thickness if non-standard. Example: 138 = 1-3/8", 214 = 2 1/4", 212 = 2 1/2".

12. EXT: Extension. Enter one of the following when doors 2" thick or greater are specified:EE = Extended EquallyEI = Extended InsideEO = Extended OutsideED = Extended Differently

EI or EO assumes the latch will be centered on a 1-3/4" door, to which material has been added.13. DIM: Enter dimension for non-standard strike lip length and mortise cylinder or blocking ring length.

012 = 1/8" 118 = 1-1/8"018 = 3/16" 114 = 1-1/4"025 = 1/4" 138 = 1-3/8"031 = 5/16" 112 = 1-1/2"037 = 3/8" 158 = 1-5/8"050 = 1/2" 134 = 1-3/4"078 = 7/8" 200 = 2"100 = 1" 400 = 4"

14. ADDITIONAL DETAILS: Enter detail for keying information and for special requirements.

How to Determine Hand of Door

RHRLHR


7

LINE OUTSIDE INSIDE DR ADDITIONAL

ITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE THK EXT DIM DETAILS/KEYING

Four Y-Series passage locks with a Dane lever in 626.

1 4 Y101 DAN 626 01-043 01-046

Ten B-Series storeroom locks with a Dane outside lever in 605 and Dane inside lever in 626, with a 2-3/8 radius face

latch and full lip radius strike, 6-pin standard cylinder, G keyway.

2 10 B581PD6 DAN 605 DAN 626 57421 5104-1

Four T-Series entry office locks with an Avalon lever in 613, standard latch and strike, 5-pin standard cylinder, G keyway

3 4 T511PD AVA 613 98535 5164 134

Three T-Series entry office locks with a Quantum lever in 605, abrasive outside lever, standard latch and strike,

for 2-1/4" thick doors, 6-pin standard cylinder, G keyway, masterkeyed to new system, with 3 keys each.

Provide 2 masterkeys.*

4 3 T511PD6 6QU 605 QUA 98535 5164 214 G Keyway, w/3 keys ea.

5 2 KB578 G Section,Master Key

6 3 50-215 Extra cut keysCharges

7 3 50-210 Master KeyingCharges

Two X-Series dormitory locks with a Troy knob and Gala rose in 606, 7-pin SFIC, A keyway, 0-bitted, one

control key, less strike.

8 2 X571BD7 TG 606 98535 LLL A - 000000

9 1 KB609-2 A Section, Control Key 0-bit

Two M-Series dormitory locks with a Hana knob and Gala rose in 625, right hand, lead-lined, 6-pin SFIC, A keyway,

construction core, one control key, two change keys.

10 2 MA571HD6 9HG 625 RHA Section,

11 2 KB632-1 Const. Change Key

12 1 KB609-1 A Section, Const. Ctrl Key

One M-Series dormitory locks with a Hana knob and Gala rose in 625, left hand reverse, knurled outside knob,

6-pin SFIC, disposable construction core.

13 1 MA571BDC 9HG 625 LR

Five W-Series classroom locks with a Dane lever in 626. Standard latch and strike. 6-pin Schlage C keyway,

Keyed Different.

14 5 W561PD6 DAN 626 30-197 30-148 Sch C KD

*Use Master Keying Schedule form and appropriate Master Key Specification Sheet when ordering.


FORMS & EXAMPLES •

May 1, 2003

To: Falcon Dealer100 East AvenueDealer City, State 11111

RE: District 10, Jones Elementary School

Please consider this authorization to ship product for the above-referenced project.

Jones Elementary School is to be keyed using a new Falcon Restricted Key System. For security reasons,we would like to have all keys for this facility shipped to a location other than the job site. Master keyedproducts, however, can be shipped directly to the site. This letter authorizes Falcon to ship our restrictedproducts to the following addresses:

Master Keyed Products, Construction Keys, Locks Less Cylinders, and Locks with Construction Cores

Attn: Building Project ManagerDistrict 10 Schools555 Main StreetEnd User City, State 55555

Master Keys, Change Keys, Control Keys, and Key BlanksAttn: LocksmithDistrict 10 Lockshop1201 Fifth AvenueEnd User City, State 55555

These two addresses above serve as our only authorized shipment addresses for all orders placed for ourfacility. We understand that this letter will be kept on file and referenced for our future orders and that anew letter is only required to add, remove, or change authorized shipping locations.

Sincerely,

End User RepresentativeFacilities Manager

Date - REQUIRED

Facility Name - REQUIRED

Dealer Name -

RECOMMENDED

Authorized Ship -

To Addresses -

REQUIRED

End User

Representative

Signature -

REQUIRED

Letter may be mailed or faxed to Falcon

Falcon Restricted Order Processing

3899 Hancock ExpresswaySecurity, CO 80911Fax: (888) 840-7735

District 10 Schools 555 Main StreetEnd User City, State 55555(555) 555-5555

End UserLetterhead -REQUIRED

DISTRICT 10

Sample Letter of AuthorizationFor Falcon® Restricted Products

FA

LC

ON

No

n-M

aste

r K

eyed

OR

DE

RM

AR

K C

AR

TO

NS

:A

CC

OU

NT

NO

.P.

O. N

O

DA

TE

CU

ST

OM

ER

NA

ME

AN

D A

DD

RE

SS

:S

HIP

TO

:

Pag

e 1

of

____

___

©

200

6 In

ger

soll

Ran

d

AD

DIT

ION

AL

DE

TA

ILS

LIN

EO

UT

SID

EIN

SID

EU

se f

or

Key S

ecti

on

an

d B

itti

ng

ITE

MQ

TY

PR

OD

UC

TD

ES

FIN

DE

SF

INH

AN

DL

AT

CH

ST

RIK

EE

XT

DIM

Info

rmati

on

, K

A G

rou

ps,

etc

.

QU

OT

E#

PR

ICE

BO

OK

:

SH

IPP

ING

INS

TR

UC

TIO

NS

RE

QU

ES

TE

D S

HIP

DA

TE

OR

DE

R W

RIT

TE

N B

Y

FOR

FU

RT

HE

R IN

FOR

MA

TIO

N, C

ON

TAC

TN

ame:

Ph

on

e:

Fax.

Available @ www.falcon.ingersollrand.com

Acco

un

t No

. _______ _____________ P.O. N

o. ______________________ P

age _______ o

f _______ ©

2006 Ing

ersoll R

and

AD

DIT

ION

AL

DE

TA

ILS

LIN

EO

UT

SID

EIN

SID

EU

se fo

r Key S

ectio

n a

nd

Bittin

gIT

EM

QT

YP

RO

DU

CT

DE

SF

IND

ES

FIN

HA

ND

LA

TC

HS

TR

IKE

EX

TD

IMIn

form

atio

n, K

A G

rou

ps, e

tc.

FA

LC

ON

QU

OT

E#

PR

ICE

BO

OK

:

SH

IPP

ING

INS

TR

UC

TIO

NS

RE

QU

ES

TE

D S

HIP

DA

TE

OR

DE

R W

RIT

TE

N B

Y

FOR

FU

RT

HE

R IN

FOR

MA

TIO

N, C

ON

TAC

TN

ame:

Ph

on

e:

Fax.

Mas

ter

Key

edO

RD

ER

Att

ach

Key

Sys

tem

Su

mm

ary

MA

RK

CA

RT

ON

S:

AC

CO

UN

T N

O.

P.O

. NO

D

AT

E

CU

ST

OM

ER

NA

ME

AN

D A

DD

RE

SS

:S

HIP

TO

:

Pag

e 1

of

____

___

©

200

6 In

ger

soll

Ran

d

AD

DIT

ION

AL

DE

TA

ILS

LIN

EO

UT

SID

EIN

SID

EH

AN

DU

se f

or

Key S

ecti

on

an

d B

itti

ng

ITE

MQ

TY

PR

OD

UC

TD

ES

FIN

DE

SF

INL

AT

CH

ST

RIK

EE

XT

DIM

Info

rmati

on

, K

A G

rou

ps,

etc

.

Key a

nd

Lab

el

Instr

ucti

on

s____________K

Hd

gIt

em

#Q

tyD

oo

r#K

ey

MK

(En

ter

bel

ow

lin

e it

em)

Sym

bo

l(s)

Sym

bo

l(s)

(On

lyo

ne

han

dp

er li

ne

item

)

Available @ www.falcon.ingersollrand.com

Acco

un

t No

. _______ _____________ P.O. N

o. ______________________ P

age _______ o

f _______ ©

2006 Ing

ersoll R

and

AD

DIT

ION

AL

DE

TA

ILS

LIN

EO

UT

SID

EIN

SID

EH

AN

DU

se fo

r Key S

ectio

n a

nd

Bittin

gIT

EM

QT

YP

RO

DU

CT

DE

SF

IND

ES

FIN

LA

TC

HS

TR

IKE

EX

TD

IMIn

form

atio

n, K

A G

rou

ps, e

tc.

Key a

nd

Lab

el In

stru

ctio

ns____________K

Hd

gIte

m#

Qty

Do

or#

Key

MK

(En

ter belo

w lin

e item)

Sym

bo

l(s)

Sym

bo

l(s)

(On

lyo

ne

han

dp

er line

item)


Ordering Forms Forms & Examples

13

FALCON LOCKStandard Cylinder Key SystemSpecification Sheet

This form must be filled out as completely and accurately aspossible so that Falcon Lock may provide you with exactly whatyou need for your Standard Cylinder key system.

5. Key Quantities

Level Qty❏ GGGMK❏ GGMK❏ GMK 4❏ MK 2 ❏ SKD❏ Other:

Change Keys# of keys per Cylinder 3# of keys per Key Symbol

Special Function❏ Construction Keys❏ EMK❏ Housekeeping❏ Engineering❏ Janitor❏ MechanicalOther:

6. Packing/Marking

❏ Change Keys packed with Locks❏ Change Keys packed separatelyMarking Instructions

Special Instructions

7. Shipping Address

Construction Keys/Cores

Permanent Keys/Cylinders

Customer: Your Distribution

Job Name: Your Job Name Here

Location: City, State

1. System StatusNew ❏Existing ❏

Falcon ❏Key File or Factory Order #Weiser ❏

Bitting Sheet (attach) ❏Construction Keyed Yes ❏ No ❏

2. System Type018 (standard) ❏025* (restricted) ❏* Requires prior factory approval

3. CylindersType

5 Pin ❏6 Pin ❏7 Pin ❏Keyway(s) Specify: G

Stamping:Keyset Symbol ❏Plug Face ❏Cylinder Side ❏

4. KeysKey Section(s) Specify: GType

5 Pin ❏6 Pin ❏7 Pin ❏Embossed ❏Non-Embossed ❏Large Bow ❏Plastic ADA Bow ❏

StampingBitting Number ❏Keyset Symbol ❏Do Not Duplicate ❏U.S. Govt. Prop. Do Not Duplicate ❏Special Stamping


Ordering FormsForms & Examples

14

FA

LC

ON

9. Bitting List 10. Name of person to contact with questions

Required Yes ❏ No ❏Ship To Address Name:

End user address hereLOA must accompany order for all Tel: Bitting list requests

Fax:

11. Name and signature of person responsible for the integrity of this key system:

Name: Title:

Signature:

This document will become part of the permanent keying files for this project. If therequirements that have been specified on this document change, it is the responsibility ofthe end user/owner to notify their local factory representative or Falcon Lock.

FALCON LOCK3899 Hancock Expressway

Security, CO 80911877-671-7011

International Only001-512-712-1316

US FAX 888-840-7732US FAX 888-840-7735

International FAX 719-896-3387

8. Additional Information (Specialized Keyset Lettering, System Expansion Notes, Cross Keying, Remarks, etc.)

Provide system to allow for 100% expansion


15

FA

LC

ON

Interchangeable Core KeySystem Specification Sheet Master Keying

Customer: ___________________________________

Job Name:___________________________________

Location: ____________________________________

1. System StatusNew ❏Existing ❏

Falcon ❏Key File or Factory Order #Best ❏Arrow ❏


2. System Type A-2 (standard) ❏A-4❏

3. CoresStyle

Slide Cover ❏Capped ❏

Type ❏6-Pin7-Pin

Key Section(s) Specify:Stamping:

Keyset Symbol ❏Face ❏Side ❏

4. Keys

Keyway(s) Specify:Type

6-Pin ❏7-Pin ❏Embossed ❏Non-Embossed ❏Plastic ADA Bow ❏


This form must be filled out as completely and accurately aspossible so that Falcon Lock may provide you with exactlywhat you need for your Key System.

5. Keyed Quantities

Level Qty.❏ GGGMK ______________❏ GGMK ______________❏ GMK ______________❏ MK ______________❏ SKD ______________❏ Other ______________

Change KeysNumber Keys per Symbol ______________Number Keys per Cylinder ______________

Special Function❏ Control ______________❏ Construction Keys ______________❏ Construction Control ______________❏ SKD Control ______________❏ EMK ______________❏ Housekeeping ______________❏ Engineering ______________❏ Janitor ______________❏ Mechanical ______________❏ Other: ______________

6. Packing/Marking

❏ Change Keys packed with Cores❏ Change Keys packed separately

Marking Instructions


7. Shipping Address


Permanent Keys/CylindersFALCON LOCK3899 Hancock Expressway877-671-7011 phoneUS fax 888-840-7735 (East)

888-840-7732 (West)Fax 719-896-3387 (International only)www.falcon.ingersollrand.com


FA

LC

ON

Master Keying

8. Additional Information

(Specialized Keyset Lettering, System Expansion Notes, Cross Keying, Remarks, etc.)

9. Bitting List

Required Yes ❏ No ❏Ship To Address:

10. Name of person to contact with questions

Name: ______________________________________Tel: _________________________________________Fax: _________________________________________


Name: ______________________________________Title: ________________________________________Signature: ___________________________________

This document will become a part of the permanent keying files for this project. If the requirements that have been specified on this document change, it is the responsibility of the end user/owner to notify their local factoryrepresentative or Falcon Lock Company.

FALCON LOCK3899 Hancock ExpresswaySecurity, CO 80911877-671-7011 phoneUS fax 888-840-7735 (East)



17

FA

LC

ON

Master KeyingKey System Specification Sheet

Customer: ___________________________________

Job Name:___________________________________

Location: ____________________________________

1. System Status

New ❏Existing ❏

Falcon ❏Key File or Factory Order # ________________


2. System Type

018 (standard) ❍025* (restricted) ❍* Requires prior factory approval

3. Cylinders

Type5-Pin ❏6-Pin ❏7-Pin ❏Keyway(s) Specify: _______________________

StampingKeyset Symbol ❏Plug Face ❏Cylinder Side ❏

4. Keys

Key Section(s) Specify: ____________________Type

5-Pin ❏6-Pin ❏7-Pin ❏Embossed ❏Non-Embossed ❏Large Bow ❏


This form must be filled out as completely and accurately aspossible so that Falcon Lock company may provide you withexactly what you need for your Key System.

5. Keyed Quantities

Level Qty❏ GGGMK ______________❏ GGMK ______________❏ GMK ______________❏ MK ______________❏ SKD ______________❏ Other ______________

Change KeysNumber of Keys Per SymbolNumber of Keys Per Cylinder______________

Special Function❏ Construction Keys ______________❏ EMK ______________❏ Housekeeping ______________❏ Janitor ______________❏ Mechanical ______________❏ Other: ________________________________

6. Packing/Marking

❏ Change Keys packed with Locks❏ Change Keys packed separately

Marking Instructions


7. Shipping Address


Permanent Keys/Cylinders




FA

LC

ON

Master Keying

8. Additional Information

(Specialized Keyset Lettering, System Expansion Notes, Cross Keying, Remarks, etc.)

9. Bitting List

Required Yes ❏ No ❏Ship To Address:

10. Name of person to contact with questions

Name: ______________________________________Tel: _________________________________________Fax: _________________________________________


Name: ______________________________________Title: ________________________________________Signature: ___________________________________

This document will become a part of the permanent keying files for this project. If the requirements that have been specified on this document change, it is the responsibility of the end user/owner to notify their local factoryrepresentative or Falcon Lock.



FA

LC

ON

QU

OT

E#

PR

ICE

BO

OK

:

SH

IPP

ING

INS

TR

UC

TIO

NS

RE

QU

ES

TE

D S

HIP

DA

TE

OR

DE

R W

RIT

TE

N B

Y

FOR

FU

RT

HE

R IN

FOR

MA

TIO

N, C

ON

TAC

TN

ame:

Ph

on

e:

Fax.

Mas

ter

Key

edO

RD

ER

Att

ach

Key

Sys

tem

Su

mm

ary

MA

RK

CA

RT

ON

S:

AC

CO

UN

T N

O.

P.O

. NO

D

AT

E

CU

ST

OM

ER

NA

ME

AN

D A

DD

RE

SS

:S

HIP

TO

:

Pag

e 1

of

____

___

©

200

6 In

ger

soll

Ran

d

AD

DIT

ION

AL

DE

TA

ILS

LIN

EO

UT

SID

EIN

SID

EH

AN

DU

se f

or

Key S

ecti

on

an

d B

itti

ng

ITE

MQ

TY

PR

OD

UC

TD

ES

FIN

DE

SF

INL

AT

CH

ST

RIK

EE

XT

DIM

Info

rmati

on

, K

A G

rou

ps,

etc

.

Key a

nd

Lab

el

Instr

ucti

on

s____________K

Hd

gIt

em

#Q

tyD

oo

r#K

ey

MK

(En

ter

bel

ow

lin

e it

em)

Sym

bo

l(s)

Sym

bo

l(s)

(On

lyo

ne

han

dp

er li

ne

item

)

27W

1386

5-S

AM

PL

E10

3

SH

IP B

ES

T W

AY

PA

RT

IAL

SH

IPM

EN

T I

S O

K

Jun

e 14

, 200

5

Joh

n R

. Doe

, AH

C

Joh

n R

Doe

888.

555.

1212

888.

555.

1717

AC

ME

OF

FIC

E A

ND

IN

DU

ST

RIA

L P

AR

KA

BC

CO

NT

RA

CT

ING

AM

AL

GA

MA

TE

D C

ON

TR

AC

T H

AR

DW

AR

E12

34 Y

our

Str

eet

You

r T

own

, YS

000

00-0

000

SA

MP

LE

123

SA

MP

LE

-AB

CM

ay 1

7, 2

005

AM

AL

GA

MA

TE

D C

ON

TR

AC

T H

AR

DW

AR

E12

34 Y

our

Str

eet

You

r T

own

, YS

000

00-0

000

14

MA561BB

AVA

626

RH

Best Style caping SFIC

151

209

AA2

AA,A

161

230

AB7

AB,A

261

213

AB10

AB,A

23

MA561BB

AVA

626

LHR

Best Style capping SFIC

171

204B

AA4

AA,A

231

205

AA2

AA,A

381

222

AA3X

AA,A

31

MA301

AVA

626

AVA

625

RHR

121

202A

41

C977

626

Supply with Adams-Rite Cam (A12667-001-00)


FA

LC

ON

Master Keying Keying Schedule Form

Total QTY PRODUCT FINISH

Stamp/Mark:

Quantity Keyset Door# Hand Misc Remark




B-1

B-SeriesIntroduction

Table of Contents

Function Chart B-2

Complete Lock Pricing B-3

Options B-4

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-4

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-4

Conventional Cylinder Options . . . . . . . . . . . .B-5

Small Format Interchangeable Cores . . . . . .B-5

Small Format Construction Cores . . . . . . . . .B-5

Locks Less Components . . . . . . . . . . . . . . . .B-6

Tactile Warning Strip (not available in 613) . .B-6

Parts B-7

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-7

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-7

Chassis Assemblies . . . . . . . . . . . . . . . . . . . .B-7

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-8

Miscellaneous Parts . . . . . . . . . . . . . . . . . . . .B-8

Complete Conventional Cylinders B-6

How To Order Forms & Examples

Product Identification

B 501 P D

Latch SuffixD = DeadlatchS = Springlatch

Cylinder SuffixB = Less SFICBDC = Disp. Const. CoreBB = With SFIC Core (Best)G = With SFIC Core (Falcon)H = With Keyed Const.

CoreL = Less 6-Pin CylinderP = 6-Pin Cylinder pinned

to 5 chambersP6 = 6-Pin Cylinder pinned

to 6 chambersCP6 = 6-Pin Cylinder

Schlage CFunction

See B-2

Lock Series

SFIC = Small Format (Best® Style) Interchangeable Core

Finish Codes and DescriptionsCode Description

605 (US3) Bright Brass

606 (US4) Satin Brass

613 (US10B) Oil Rubbed Bronze

625 (US26) Bright Chrome

626 (US26D) Satin Chrome

Standard Features - Furnished unless otherwise specified

Certification ANSI A156.2, Series 4000, Grade 2, UL Listed for 3-Hour fire door

Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw, 2-3/4" backset

Strike 1-1/4" x 4-7/8", ANSI, Square corner, no box

Cylinder 6-Pin, Solid brass, Keyed 5-Pin, Falcon G keyway, Keyed different (KD)

Door Range 1-3/8" - 2" standard

Keys Two, Nickel silver cut keys per lock, Falcon G keyway

Grade 2 Standard Duty Cylindrical LocksetsANSI-A156.2, SERIES 4000, GRADE 2


B-Series • Functions

B-2

B101 F75 Passage/Closet LatchsetLatch bolt by levers at all times.

B161 F111 Communicating Passage LockDeadlocking latch bolt by inside lever. Non-removable blank plate outside.

B301 F76 Privacy/Bedroom/Bath LockLatch bolt by levers. Outside lever locked by push button in inside lever. Rotating inside lever or closing door releases push button. Emergency release in outside lever unlocks door.

B341 F112 Communicating Store Room LockDeadlocking latch bolt by inside leverexcept when locked by key. Non-removable blank plate on oppositeside of lever (22/32" projection).

B501 F82 Entry LockPush button locking. Button on insidelocks outside lever until unlocked bykey or by rotating inside lever. Insidelever always free. Deadlocking latchbolt.

B511 F109 Entry/Office LockTurn/push button locking. Pushing andturning button locks outside leverrequiring use of key until button ismanually unlocked. Push buttonlocking. Pushing button locks outsidelever until unlocked by key or byrotating inside lever. Inside lever alwaysfree. Deadlocking latch bolt.

B561 F84 Classroom LockDeadlocking latch bolt by levers. Outside lever is locked by key in outside lever. Inside lever is always free.

B581 F86 Store RoomDeadlocking latch bolt by lever insideor key outside. Outside lever is alwayslocked. Inside lever always free.

B611 F90 Assisted Living/Corridor LockDeadlocking latch bolt by levers exceptwhen locked by push button on insidelever. Key in outside lever locks orunlocks outside lever and releasesbutton. Closing door releases push button.Inside lever is always free.

B12 Dummy TrimSingle Trim-surface mounted rigidlever.

ANSI A156.2 Series 4000 Grade 2

Key-In-Lever Locks

FALCON ANSI

Key-In-Lever Locks

FALCON ANSI


Grade 2 Standard Duty Cylindrical LocksetsANSI-A156.2, SERIES 4000, GRADE 2 Complete Locks • B-Series

B-3

D (Dane) Q (Quantum)

Key-In-LeverDesigns and Finishes

D Q

Function Description 626 605 606 613 625

Single Cylinder FunctionsB341PD Connecting / ExitB501PD EntryB511PD Entry/Office $231.00 $243.00 B561PD ClassroomB581PD StoreroomB611PD Assisted Living / Dormitory 261.00 273.00Non-Keyed FunctionsB101S Passage

166.00 178.00B161D Communicating LatchB301S Privacy 192.00 204.00Dummy TrimB12 Half Dummy 75.00 81.00

Conventional Cylinder Options

Description SpecifyAdd to Lock Price

(per core)5 pinned cylinder P Suffix

STDExample: B581P6 pinned cylinder P6 Suffix

Example: B581P66 pinned Competitor keyway cylinders* P6 Suffix

Example: B581P6 (0 Bitted, KD, KA4 only) N/CSchlage C (6 pin only) CP6 Suffix

Example: B581CP6 (All other keying, not listed above)

B-Series Complete Conventional Cylinders

Cylinder Mechanism Part NumberPrice Each

5 Pin Cylinder A23155-025 Pin Cylinder - B611 A23151-066 Pin Cylinder A23165-02 $43.00

6 Pin Cylinder - B611 A23161-06

* Competitor keyways are furnished 0 bitted, unless otherwise specified. Not available Master keyed, except Schlage C.

Notes: 1) Finishes: 606 and 626 only.2) Specify keyway.3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections add $9.00 to list price. See Restricted Keyway Policy (p. 8) for standard keyways and

policy on use of restricted keyway cylinders. Contact 877-671-7011 for availability.

* Keying must be specified.**Locks are assessed one non-refundable handling charge (50-231F) per core.

Note: 5) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details

Small Format Interchangeable Core and Small Format Construction Core


(per core)Small format core * G Suffix

Example: B581GD6Small format core (Best Style) * BB Suffix $41.00

Example: B581BB6Small format construction core ** H Suffix 29.50

Example: B581HD6Less Small format core B Suffix N/C

Example: B581BDSmall format disposable core BDC Suffix 3.60

Example: B581BDC


B-Series • Cylinder Options

B-4


Latch and Strike Options • B-Series

B-5

Latches with Locks

BacksetSpecify

Description Springlatch/Deadlatch 301/611Add to Lock Price

Square corner, 1-1/8" x 2-1/4", standard 57435 576352-3/4" Square corner, 1" x 2-1/4" 57430 57630 N/C

1/4" Radius round corner, 1" x 2-1/4" 57431 57631 Square corner, 1" x 2-1/4" 57420 57620

2-3/8" ** Square corner, 1-1/8" 57425 57625 N/C1/4" Radius round corner, 1" x 2-1/4" 57421 57621

5" Backset extension link A31727-005-00 * $32.70

Strikes with LocksDescription Lip Length Specify Add to Lock Price

ANSI, 1-1/4" x 4-7/8" standard 1-5/16" 5164 N/CSquare Corner, full lip 1-5/8" x 2-1/4" 1" 01-049 N/C1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" 01-048 N/CSquare Corner, T-strike, 1-1/8" x 2-3/4" 1-5/16" 01-046 N/CANSI dust box 1" deep, steel - 005099-000-30 N/CANSI, 1-1/4" x 4-7/8" 7/8" 5161 N/C

Strikes sold separateFinishes: 605, 606, 613, 626, 630 (ANSI only)

Description Lip Length Specify List Price

Square Corner, T-strike, 1-1/8" x 2-3/4" 1-1/8" Q001-0461/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1” Q001-048 $3.50Square corner, full lip 1-5/8" x 2-1/4" Q001-049ANSI, 1-1/4" x 4-7/8" standard 1-5/16" 005164-000 11.40 ANSI dust box 1" deep, steel - 005099-000-30 2.60 ANSI, 1-1/4" x 4-7/8" 7/8" 005161-000 11.40

Latches sold separateFinishes: 605, 613, 630

Backset & PriceLatch Face

2-3/8" 2-3/4" Price

1" Spring Latch (101) A57420-000 A57430-0001" Spring Latch (301) A57620-000 A57630-0001" Spring Latch - 1⁄4" Rad. (101) A57421-000 A57431-0001" Spring Latch - 1⁄4" Rad. (301) A57621-000 A57631-0001" Deadlatch A57420-00D A57430-00D1" Deadlatch (611) A57620-00D A57630-00D $23.301" Deadlatch - 1⁄4" Rad. A57421-00D A57431-00D 1" Deadlatch - 1⁄4" Rad. (611) A57621-00D A57631-00D1-1⁄8" Spring Latch (101) A57425-000 A57435-0001-1⁄8" Spring Latch (301) A57625-000 A57635-0001-1⁄8" Deadlatch A57425-00D A57435-00D1-1⁄8" Deadlatch (611) A57625-00D A57635-00D

* Backset extension link A31727-005-00 must be used with 2-3/8" backset latches** 2-3/8" backset is furnished as a 1" faceplate standard.

Shaded items are standard components and are furnished with locks unless otherwise specified.


B-Series • Trim and Chassis Options

B-6

Locks Less Components

Description SpecifyDeduct from Lock Price

Less standard cylinder L suffixExample: B581LD DAN $43.00

Less latch LLL for latchExample: B581PD DAN 626 LLL 5164 14.00

Less strike LLL for strikeExample: B581PD DAN 626 57435 LLL 7.40

LeversList Price

Part Number Description 605, 606, 613,625, 626

A31750-000 Lever, Dane closedA31751-000 Lever, Quantum closedA31750-001 Lever, Dane open $34.40A31751-001 Lever, Quantum open031700-002 Lever, Dane IC031701-002 Lever, Quantum IC

RosesList Price

Part Number Description 605, 606, 613,625, 626

031702-000 Rose, Outer031703-000 Rose, InnerA31764-000 Rose, Blank Insert and Post

$13.90

Tactile Warning (abrasive strip)Description Specify Add to Lock Price

Abrasive Strip Preface the design code with 6 $51.50Example: 6DA for DAN

Notes: 1) Outside lever only has abrasive strip adhered to the back surface of the lever.2) B581 Storeroom function locks should be used on doors requiring tactile warning of danger.3) Abrasive strip not available in 613 finish.

B Series Chassis AssembliesPart Number

Conventional Cylinder IC Core Description Price

A31706-000-00 B101 ChassisA31707-000-00 B161 Chassis

$99.90

A31709-000-00 A31709-001-00 B301/501 ChassisA31714-000-00 A31714-001-00 B511 Chassis

122.00

A31715-000-00 A31715-001-00 B561 Chassis 162.00A31716-000-00 A31716-001-00 B581 Chassis

A31708-000 A31708-001 B341 Chassis – 1-5/8" – 2" Door Thickness 122.00A31708-002 A31708-003 B341 Chassis – 1-3/8" – 1-5/8" Door ThicknessA31739-000 A31739-001 B611 Chassis 181.00

Note: 4) Chassis provided with trim finish on B341 and B611.


Parts • B-Series

B-7

ScrewsPart Number Description Finishes Size List Price021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo $0.40024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4" combo .18A31767-000 Screw pack

031742-000 (2 ea), 024416-012 (2 ea), 605, 613, 626 4.00021164-016 (2 ea)

Miscellaneous PartsPart Number Description List Price031705-000-30 Inside Rose Liner $1.40

031718-000 Push button cap 2.10031719-000 Turn button cap 2.10

031741-000-50 Lever insert 0.42

Price Book 108AEffective July 18, 2011 • Rev. 7/11B-8

NotesB-Series


D100-Series

D100-1

Introduction

Table of Contents

Function Chart D100-2

Complete Lock Pricing D100-3

Options D100-4

Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . .D100-4

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-4

Conventional Cylinder Options . . . . . . . .D100-5

Small Format Interchangeable Cores . . .D100-5

Small Format Construction Cores . . . . . .D100-5

Locks Less Components . . . . . . . . . . . .D100-6

Parts D100-7

Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7

Deadbolts . . . . . . . . . . . . . . . . . . . . . . . .D100-7

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-8

Adapters . . . . . . . . . . . . . . . . . . . . . . . . .D100-9

Door/Frame Reinforcements . . . . . . . . . .D100-9

Screws . . . . . . . . . . . . . . . . . . . . . . . . .D100-10

Screw Packs . . . . . . . . . . . . . . . . . . . . .D100-10

Complete Cylinders D100-5



D 111 P F

UL Listing SuffixF = UL Listed






Schlage CFunction

See D100-2

Lock Series









Certification BHMA - ANSI A156.5, 2001, Grade 1 auxiliary lock, Available UL Listed for 3-Hour fire door

Deadbolt 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1" throw

Strike 1-1/8" x 2-3/4", lipless, with box


Door Range 1-3/8" - 1-3/4" standard


Reinforcement Metal dust box reinforcer with three - 3" screws

Trim Ring 1" Wrought brass or bronze, reinforced with security insert

Backset 2-3/8" and 2-3/4" adjustable


FunctionsD100-Series

D100-2

D111P E0171 Classroom FunctionDeadbolt thrown or retracted by key from outside. Inside turn will only retract bolt. Bolt automaticallydeadlocks when fully thrown.

D121P E0161 Single Cylinder x RoseDeadbolt thrown or retracted by key only. Blank plate inside. Bolt automatically deadlocks when fully thrown.

D131P E2141 Double Cylinder*Deadbolt thrown or retracted by key from eitherside. Bolt automatically deadlocks when fullythrown.

D141P E2151 Single Cylinder x TurnDeadbolt thrown or retracted by key or by turn.Bolt automatically deadlocks when fully thrown.

D151 Turn x TurnDeadbolt thrown or retracted by turn unit fromeither side. Application for shelters. Boltautomatically deadlocks when fully thrown.

BHMA / ANSI A156.5, 2001, Grade 1

Bored Deadbolt Locks

FALCON ANSI

* Caution: Double cylinder locks on residences and any door, in any structure,which is used for egress are a life safety hazard in times of emergency and their useis not recommended. Installation should be in accordance with existing codes only.


Complete Locks • D100-Series

D100-3

Outside Cylinder Trim Inside Cylinder Trim Rose and Turn

Notes: 1) Split finishes are priced at the highest finish price.2) Keying options: see D100-53) ‘F’ suffix must be added for UL product.

D100 Series

Designs and Finishes


Single Cylinder FunctionsD111P Classroom Function $127.00 $133.00D121P Single Cylinder x Blank RoseD141P Single Cylinder x Turn 112.00 118.00

Double Cylinder Functions

CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

D131P Cylinder x Cylinder $144.00 $150.00Non-Keyed FunctionsD151 Turn x Turn $93.00 $99.00


D100 Series • Options

D100-4

Deadbolts with Locks

BacksetAdd to

Description HSG Dia Specify Lock PriceSquare corner, 1-1/8" x 2-1/4", standard 30-256

2-3/8" or Square corner, 1" x 2-1/4" 30-1762-3/4" 1/4" Radius round corner, 1" x 2-1/4" 1" 30-178 N/C

Circular, Drive-In bolt, 626 only 30-257For UL Listed Locks

2-3/8" or Square corner, 1-1/8" x 2-1/4", standard 30-1742-3/4" UL Square corner, 1" x 2-1/4" 1" 30-172 N/C

Circular, Drive-In bolt, 626 only 30-259



Drive-In thimble strike, 1-3/16" dia. 1" 10-064 N/CANSI, 1-1/4" x 4-7/8", with box 1-1/8" 10-087 $6.50Full Lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box 1-5/16" 10-092Square Corner, 1-1/8" x 2-3/4", standard, no box 10-094Full Lip, square corner, 1-5/8" x 2-1/4", no box 10-095 N/C1-1/8" square corner and strike

–005075

Security strike 030290 8.60

Square Corner 1/4" Radius Drive-In

10-094 10-087 10-095 10-092


Options • D100 Series

D100-5

Small FormatInterchangeable Core

Notes: 1) Split finishes are priced at the highest finish price.2) Key section must be specified and applicable charges for restricted sections will be applied. See CYL-3.3) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details

Small Format IC




Example: D111GD6 $41.00Small format core (Best Style) * BB Suffix

Example: D111BB6Small format construction core ** H Suffix 29.50

Example: D111HD6Less Small format core B Suffix N/C

Example: D111BDSmall format disposable core BDC Suffix 3.60

Example: D111BDC

* Keying must be specified** Locks are assessed one non-refundable handling charge (50-231F) per core.



D100-6



Less deadbolt LLL for deadbolt suffixExample: D111P 605 LLL 10-094 $9.80

Less strike LLL for strikeExample: D111P 605 30-257 LLL 3.20

Less conventional cylinder L suffixExample: D111L 15.90

Less conventional cylinder D131 L suffixExample: D131L 31.80




STDExample: D111P6 pinned cylinder P6 Suffix N/C

Example: D111P67 pinned cylinder P7 Suffix

$11.50(Not available on D131) Example: D111P76 pinned Competitor keyway cylinders* P6 Suffix

Example: D111P6 (0 Bitted, KD, KA4 only) N/CSchlage C (6 pin only) CP6 Suffix

Example: D111CP6 (All other keying, not listed above)

Conventional Cylinders and Lock Less Components

D100-Series Complete Conventional CylindersCylinder Mechanism Part Number Price Each

5 Pin Cylinder - D111, D141 Q500-0645 Pin Cylinder - D121 Q500-0665 Pin Cylinder - D131 Q500-070 $43.00 6 Pin Cylinder - D111, D141 Q500-0216 Pin Cylinder - D121 Q500-0586 Pin Cylinder - D131 Q500-0547 Pin Cylinder - D111, D141 Q500-046

53.007 Pin Cylinder - D121 Q500-059

* Competitor keyways are furnished 0 bitted, unless otherwise specified. Not available Master keyed, except Schlage C

Notes: 1) Finishes: 606 and 626 only2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections see Cyl-3 for charge. See Restricted Keyway Policy (p.8) for standard keyways and



Parts • D100-Series

D100-7

TrimPart Number Specify Finish Description Price EachB302-041 • Rose and Turn $31.80B302-045 • Rose and Turn (D111) 31.8012-626 • Blank Rose (D121) 17.30

B600-018 • Mounting plate for rose and rose & turn 31.80

Rose and Turn Mounting Plate Rose

Note: 1) For trim rings and inserts see Cylinders: D100

Note: 2) UL deadbolts not available as parts.

DeadboltsPart Number Specify Finish Housing Diameter Description Price EachQ330-256 • Square corner, 1-1/8" x 2-1/4" faceplateQ330-176 • Square corner, 1" x 2-1/4" faceplate $14.80Q330-178 • 1/4" radius corner, 1" x 2-1/4" faceplateQ330-257 626 1" circular drive-in, 626 only

2-3/8" or 2- 3/4"Universal

Trim, Deadbolts, Cylinders



Strikes , AdaptersD100 Series • Parts

D100-8

StrikesPart Specify Price

Number Finish Description Lip Length Each

10-064 • Drive-In, thimble strike, 1-3/16" deep - $11.9010-087 • ANSI, 1-1/4" x 4-7/8, with box 1-1/8" 16.2010-094 • Square corner, 1-1/8" x 2-3/4", no box - 12.3010-092 • Full lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box

1-5/16" 7.6010-095 • Full lip, square corner, 1-5/8" x 2-1/4", no box

B520-283 - Box for 10-094 standard strike - 0.68J250-028 2" strike mounting screws 0.78005075 • Security Strike

-6.80

030290 • 1-1/8” Square corner T-Strike 13.90

10-064 10-087 10-092 10-094 10-095

38-031 B520-649

AdaptersPart Specify Price Each

Number Finish Description (per finish)

605 606626 613 625

38-031 • 2-1/2" diameter adapter ring for 2-1/8" door prep, for under cylinder $12.10 $14.10B520-649 • Trim ring w/shield for D131/D141 15.40 17.40B520-650 • Trim ring w/shield for IC functions 15.40 17.4036-071 1-3/8” IC Core thin door shim kit, contains 36-066 & 36-068 12.80 14.80

B520-650


D100-9

ScrewsDescription Application Price Each

(Order in Part Specify multiples

Number Finish Size Type Use Door Thickness of 100)

Keyed, Single Conventional Cylinder

B600-100 1/4"-28 x 1-15/16" POH mach. Mounting 1-3/8" - 1-3/4" B600-101 1/4"-28 x 2.425" POH mach. Mounting over 1-3/4" $1.60B600-066 • 6-32 x 1/4" PH mach. Turn - B520-298 10-32 x 3/8" PH mach. Anti-pry shield - Keyed, Single SFIC Cylinder

B600-100 1/4"-28 x 1-15/16" POH mach. Mounting 1-3/8" - 2-1/4"$1.60B600-066 • 6-32 x 1/4" PH mach. Turn -

Keyed, Double Conventional Cylinder

B600-047 1/4"-28 x 3-13/16" PH mach. Mounting 1-3/8" - 1-3/4" B600-078 1/4"-28 x 3-29/64" PH mach. Mounting over 1-3/4" $1.60B520-298 10-32 x 3/8" PH mach. Anti-pry shield - Keyed, Double SFIC Cylinder

B600-053 1/4"-28 x 3-61/64" PH mach. Mounting 1-3/4" - 2-1/4" $1.60B520-298 10-32 x 3/8" PH mach. Anti-pry shield -All Functions

C603-897 • #8 x 3/4" PFH combo Deadbolt & strike - J520-028 #8 x 2" PFH wood 2" strike screw - $0.82R525-256 #12 x 3" PFH wood 3" metal dust box -

Parts • D100-SeriesScrews

Screw PacksPart Specify Price

Number Finish Door Thickness Contents Each


61-500 • 1 3/8" – 1 3/4" (1) B600-018(2) B600-100 $10.50(2) B600-066(4) C603-897

61-501 • over 1 3/4" – 2 1/4" (1) B600-018(2) B600-101 $10.50(2) B600-066(4) C603-897

Keyed, Single SFIC Cylinder

61-500 • 1 3/8" – 2" (1) B600-018(2) B600-100 $10.50(2) B600-066(4) C603-897


61-502 • 1 3/8" – 1 3/4" (2) B600-047 $7.40(4) C603-897

61-503 • over 1 3/4" – 2 1/4" (2) B600-078 7.40(4) C603-897

Keyed, Double SFIC Cylinder

61-507 • 1 3/8" – 2" (2) B600-053 $7.40(4) C603-897

Price Book 108AEffective July 18, 2011 • Rev. 7/11D100-10

Notes


Introduction D200-Series

D200-1

Table of Contents

Function Chart D200-2

Complete Lock Pricing D200-3

Options D200-4

Deadbolts . . . . . . . . . . . . . . . . . . . . . . . .D200-4

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-4

Conventional Cylinder Options . . . . . . . .D200-5

Small Format Interchangeable Cores . . .D200-5

Small Format Construction Cores . . . . . .D200-5

Locks Less Components . . . . . . . . . . . .D200-6

Parts D200-7

Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7

Deadbolts . . . . . . . . . . . . . . . . . . . . . . . .D200-7

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-8

Adapters . . . . . . . . . . . . . . . . . . . . . . . . .D200-9

Door/Frame Reinforcements . . . . . . . . . .D200-9

Screws . . . . . . . . . . . . . . . . . . . . . . . . .D200-10

Screw Packs D200-10

Complete Cylinders D200-5



D 211 P F

UL Listing SuffixF = UL Listed






Schlage CFunction

See D200-2

Lock Series









Certification BHMA - ANSI A156.5, 2001, Grade 2 auxiliary lock, Available UL Listed for 3-Hour fire door

Deadbolt 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1" throw

Strike 1-1/8" x 2-3/4", lipless, with box




Reinforcement Metal dust box reinforcer with three - 3" screws

Trim Ring 1" Wrought brass or bronze, reinforced with security insert

Backset 2-3/8" and 2-3/4" adjustable


D200 Series Functions

D211P E0172 Classroom FunctionDeadbolt thrown or retracted by key from outside. Inside turn will only retract bolt. Bolt automaticallydeadlocks when fully thrown.

D221P E0162 Single Cylinder x RoseDeadbolt thrown or retracted by key only. Blank plate inside. Bolt automatically deadlocks when fully thrown.

D231P E2142 Double Cylinder*Deadbolt thrown or retracted by key from eitherside. Bolt automatically deadlocks when fullythrown.

D241P E2152 Single Cylinder x TurnDeadbolt thrown or retracted by key or by turn.Bolt automatically deadlocks when fully thrown.

D251 Thumbturn x ThumbturnDeadbolt thrown or retracted by turn unit fromeither side. Application for storm shelters. Boltautomatically deadlocks when fully thrown.

D261 E2192 Thumbturn, Inside OnlyDeadbolt thrown or retracted by turn unit only. Nooutside trim. Bolt automatically deadlocks whenfully thrown.

D261M E01112 Thumbturn, Inside x RoseDeadbolt thrown or retracted by turn unit only.Outside blank rose. Bolt automatically deadlockswhen fully thrown.

D271 Thumbturn x Occupancy IndicatorDeadbolt thrown or retracted by turn unit only.Occupancy indicator on outside (reads either in useor vacant with color coding). Bolt automaticallydeadlocks when fully thrown.

BHMA / ANSI A156.5, 2001, Grade 2

Bored Deadbolt Locks

FALCON ANSI



D200-3

Complete Locks • D200-Series

Outside Cylinder Trim Rose and Turn

Notes: 1) Split finishes are priced at the highest finish price.2) D271 Occupancy Indicator deadbolt is shipped with emergency key (61-509) and instructions.3) ‘F’ Suffix must be added for UL product

D200 Series

Designs and Finishes


KeylessD251 Turn x TurnD261 Turn, Inside Only $61.00 $67.00D261M Turn , Inside x RoseD271 Turn, Inside x Occupancy Indicator 62.00 68.00Single Cylinder FunctionsD211P Classroom Function $83.00 $89.00D221P Single Cylinder x Rose $80.00 $86.00D241P Single Cylinder x TurnDouble Cylinder Functions

CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

D231P Double Cylinder* $104.00 $110.00D231P Double Cylinder*

Inside Cylinder Trim


D200 Series • Bolt & Strike Options

D200-4

Deadbolts with Locks

BacksetAdd to

Description HSG Dia Specify Lock PriceSquare corner, 1-1/8" x 2-1/4", standard 30-253

2-3/8" or Square corner, 1" x 2-1/4" 30-1752-3/4" 1/4" Radius round corner, 1" x 2-1/4" 1" 30-177 N/C

Circular, Drive-In bolt, 626 only 30-254For UL Listed Locks

2-3/8" or Square corner, 1-1/8" x 2-1/4", Standard 30-1732-3/4" UL Square corner, 1" x 2-1/4" 1" 30-171 N/C

Circular, Drive-In bolt, 626 only 30-258

Square Corner Round Corner Drive-In


10-064 10-087 10-092 10-094 10-095


Drive-In thimble strike, 1-3/16" dia. 1" 10-064 N/CANSI, 1-1/4" x 4-7/8", with box 1-1/8" 10-087 $6.40Full Lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box 1-5/16" 10-092Square Corner, 1-1/8" x 2-3/4", standard, no box 10-094Full Lip, square corner, 1-5/8" x 2-1/4", no box 10-095 N/C1-1/8" square corner and strinke – 005075Security strike 030290 8.60


Options • D200-Series

D200-5

Small FormatInterchangeable Core

Notes: 1) Split finishes are priced at the highest finish price.2) Key section must be specified and applicable charges for restricted sections will be applied. See CYL-3Handling charge (50-231F) will be charged per core. See page CYL-11 for details.

3) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details

Small Format IC




Example: D211GD6 $41.00Small format core (Best Style) * BB Suffix

Example: D211BB6Small format construction core ** H Suffix 29.50

Example: D211HD6Less Small format core B Suffix

N/CExample: D211BDSmall format disposable core BDC Suffix 3.60

Example: D211BDC




D200-6

Conventional Cylinders and Lock Less Components



Less deadbolt LLL for deadbolt suffixExample: D211P 605 LLL 10-094 $9.80

Less strike LLL for strikeExample: D211P 605 30-171 LLL 3.20

Less conventional cylinder L suffixExample: D211L 15.90

Less conventional cylinder D231 L suffixExample: D231L 31.80



(per core)5 pinned cylinder P Suffix STD

Example: D211P6 pinned cylinder P6 Suffix N/C

Example: D211P67 pinned cylinder P7 Suffix $11.50(Not available on D231) Example: D211P7 6 pinned Competitor keyway cylinders* P6 Suffix

Example: D211P6 (0 Bitted, KD, KA4 only)Schlage C (6 pin only) CP6 Suffix N/C

Example: D211CP6 (All other keying, not listed above)

Notes: 1) Finishes: 606 and 626 only2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections see Cyl-3 for charge. See Restricted Keyway Policy (p.8) for standard keyways and



D200-Series Complete Conventional CylindersCylinder Mechanism Part Number Price Each

5 Pin Cylinder - D211, D241 Q500-0675 Pin Cylinder - D221 Q500-0695 Pin Cylinder - D231 Q500-0726 Pin Cylinder - D211, D241 Q500-010 $43.00

6 Pin Cylinder - D221 Q500-0566 Pin Cylinder - D231 Q500-0127 Pin Cylinder - D211, D241 Q500-014 53.007 Pin Cylinder - D221 Q500-057


D200- 7

TrimPart Number Specify Finish Description Price EachB302-041 • Rose and Turn $31.80B302-045 • Rose and Turn (D211) 31.8012-626 • Blank Rose (D221) 17.30

B600-018 • Mounting plate for rose and rose & turn 31.80

Rose and Turn Mounting Plate Rose

DeadboltsPart Number Specify Finish Housing Diameter Description Price EachQ330-253 • Square corner, 1-1/8" x 2-1/4" faceplateQ330-175 • Square corner, 1" x 2-1/4" faceplate $14.80Q330-177 • 1/4" radius corner, 1" x 2-1/4" faceplateQ330-254 626 1" circular drive-in, 626 only

2-3/8" or 2- 3/4"Universal

Trim, Deadbolts, Cylinders


Parts • D200-Series

Note: 1) UL deadbolts not available as parts.

Keys - Emergency For Occupancy IndicatorPart Number Description Price Each

61-509 Emergency Release Key – Standard Size for Occupancy Indicator $6.5061-510 Emergency Release Key – Large Size for Occupancy Indicator 13.20


D200 Series • Parts Strikes , Adapters

10-064 10-087 10-094 10-094 10-095

StrikesPart Specify Price

Number Finish Description Lip Length Each

10-064 • Drive-In, thimble strike, 1-3/16" deep - $11.9010-087 • ANSI, 1-1/4" x 4-7/8, with box 1-1/8" 16.2010-094 • Square corner, 1-1/8" x 2-3/4", no box - 12.3010-092 • Full lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box

1-5/16" 7.6010-095 • Full lip, square corner, 1-5/8" x 2-1/4", no box

B520-283 - Box for 10-094 standard strike - 0.68J250-028 2" strike mounting screws 0.78005075 • Security Strike

-6.80

030290 • 1-1/8” Square corner T-Strike 13.90

38-031 B520-649

AdaptersPart Specify Price Each

Number Finish Description (per finish)

605 606626 613 625

38-031 • 2-1/2" diameter adapter ring for 2-1/8" door prep, for under cylinder $12.10 $14.10B520-649 • Trim ring w/shield for D131/D141 15.40 17.40B520-650 • Trim ring w/shield for IC functions 15.40 17.4036-071 1-3/8” IC Core thin door shim kit, contains 36-066 & 36-068 12.80 14.80

B520-650


D200-9

ScrewsDescription Application Price Each

(Order in Part Specify multiples

Number Finish Size Type Use Door Thickness of 100)


B600-100 1/4"-28 x 1-15/16" POH mach. Mounting 1-3/8" - 1-3/4" B600-101 1/4"-28 x 2-1/2" POH mach. Mounting over 1-3/4" $1.60B600-066 • 6-32 x 1/4" PH mach. Turn - B520-298 10-32 x 3/8" PH mach. Anti-pry shield - Keyed, Single SFIC Cylinder

B600-100 1/4"-28 x 1-15/16" POH mach. Mounting 1-3/8" - 2-1/4" $1.60B600-066 6-32 x 1/4" PH mach. Turn - Keyed, Double Conventional Cylinder

B600-047 1/4"-28 x 3-13/16" PH mach. Mounting 1-3/8" - 1-3/4" B600-078 1/4"-28 x 3-29/64" PH mach. Mounting over 1-3/4" $1.60B520-298 10-32 x 3/8" PH mach. Anti-pry shield - Keyed, Double SFIC Cylinder

B600-053 1/4"-28 x 3-61/64" PH mach. Mounting 1-3/4" - 2-1/4" $1.60B520-298 10-32 x 3/8" PH mach. Anti-pry shield -Keyless, D261

B600-066 • 6-32 x 1/4" PH mach. Turn - B600-048 10-32 x 1/2" PH mach. Mounting plate - $1.60F506-359 #8 x 3/4" RH wood Mounting plate 0.60Keyless, D261M, D271

B520-662 10-32 x 1-3/4" POH mach. Mounting -B520-663 10-32 x 1-3/4" POH mach. Mounting - $1.60B600-066 • 6-32 x 1/4" PH mach. TurnAll Functions

C603-897 • #8 x 3/4" PFH combo Deadbolt & strike - J520-028 #8 x 2" PFH wood 2" strike screw - $0.82R525-256 #12 x 3" PFH wood 3" metal dust box -

Screws Parts • D200-Series


Screw PacksPart Specify Price

Number Finish Door Thickness Contents Each

Keyless, D261

61-506 • 1 3/8" – 2 1/4" (2) B600-048(2) F605-359 $12.60(4) C603-897(1) B600-018(2) B600-066

Keyless, D261M, D271

61-504 • 1-3/8" - 1-3/4" (2) B520-662(4) C603-897 $16.50(2) B600-066(4) B600-018

61-505 • 1-3/4" - 2-1/4" (2) B520-663(4) C603-897 16.50(2) B600-066(4) B600-018


61-500 • 1 3/8" – 1 3/4" (1) B600-018(2) B600-100 $10.50(2) B600-066(4) C603-897

61-501 • over 1 3/4" – 2 1/4" (1) B600-018(2) B600-101 10.50(2) B600-066(4) C603-897

Keyed, Single SFIC Cylinder

61-500 • 1 3/8" – 2" (1) B600-018(2) B600-100 $10.50(2) B600-066(4) C603-897


61-502 • 1 3/8" – 1 3/4" (2) B600-047 $7.40(4) C603-897

61-503 • over 1 3/4" – 2 1/4" (2) B600-078 7.40(4) C603-897

Keyed, Double SFIC Cylinder

61-507 • 1 3/8" – 2" (2) B600-053 $7.40(4) C603-897

D200 Series • Parts Screw Packs


Introduction

H-1

H-Series

Table of Contents

Function Chart H-2

Complete Lock Pricing H-3

Options H-4

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-4

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-4

Parts H-5

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5

Chassis Assemblies . . . . . . . . . . . . . . . . . . . .H-5

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5

Miscellaneous Parts . . . . . . . . . . . . . . . . . . . .H-5

Complete Conventional Cylinders H-6

Conventional Cylinder Options . . . . . . . . . . .H-5

Small Format Interchangeable Cores . . . . . .H-5

Small Format Construction Cores . . . . . . . . .H-5

Locks Less Components . . . . . . . . . . . . . . . .H-5

Tactile Warning Strip (not available in 613) . .H-5



H 101 P D

Latch SuffixD = Deadlatch





Schlage CFunction

See H-2

Lock Series

For SFIC option, 6 or 7 pin must be specifiedSFIC = Small Format (Best® Style) Interchangeable Core




630 (US32D) Satin Stainless


Certification UL Listed for 1-1/2-Hour fire door

Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw

Strike 1-1/8" x 2-3/4" lipless and 1-1/8" x 2-3/4" T strike


Door Range 1-3/8" - 2" standard


Backset 2-3/4"

H-Series • Functions

Price Book 108AEffective July 18, 2011 • Rev. 7/11H-2

H101 F95 Entry/Single LockLatch bolt operated by knob or leverfrom either side. Rotating turn frominside or key from outside extends dead bolt. Dead boltand latch bolt retract by rotating insideknob or lever.

H451 F100 Hotel/Motel LockDeadlocking latch bolt operated by keyoutside or rotating inside knob. Outsideknob rigid. Rotating turn from inside oremergency key outside extends deadbolt. Both dead bolt and deadlockinglatch bolt retract by rotating insideknob. Depressing spanner button ininside knob operates visual indicatorshutting out all keys except emergencykey. Rotation of inside spanner buttonprovides lockout feature.

H461 F101 Hotel/Motel LockDeadlocking latch bolt operated by keyoutside or rotating inside knob. Outsideknob rigid. Rotating turn from insideextends dead bolt and changes visualmessage on outside from vacant tooccupied. Both dead bolt anddeadlocking latch bolt retract byrotating inside knob. Depressingspanner button in inside knob operatesvisual indicator shutting out all keysexcept emergency key. Rotation ofinside spanner button provides lockoutfeature.

H511 F96/97 Entry/Double LockingDead bolt thrown or retracted by key inupper lock from outside or by insideturn. Deadlocking latch retracted by keyin outer knob when locked by pushingbutton in inner knob. Outer knob maybe fixed in locked position by rotatingbutton. Dead bolt and latch boltretracted by rotating inside knob.

Interconnected Locks

FALCON ANSI

Interconnected Locks

FALCON ANSI


Standard Duty Tubular Locksets

H-3

Interconnected Locks • H-Series

*Available with lever inside and knob outside only. Specify both outside and inside designs.† When Dane 630 is ordered for exterior, Dane 626 is provided for interior.

Note: 1) Includes two (2) guest keys and instruction plate (A03040-000-00). Does not include master keying.

E (Elite) H (Hana) D (Dane)

Interconnected LocksDesigns and Finishes

E H D

605 613, 630 605 613, 630†

Functions DescriptionH101PD Passage Deadlock $280.00 $292.00 $305.00 $317.00H451PD* Hotel 360.00 372.00 392.00 404.00H461PD* Hotel with Indicator 373.00 385.00 405.00 417.00H511PD* Entry/Office 334.00 346.00 363.00 375.00


Deadbolts/Spring Latches (H101)SpecifyCombo Add to Lock

Backset Deadbolt Deadlatch Number Price74435 57435 01-062

2-3/4" 74430 57430 01-06374431 57431 01-064 N/C74420 57420 01-066

2-3/8" 74425 57425 01-065 74421 57421 01-067

Deadbolts/Deadlatches (H511)SpecifyCombo Add to Lock


2-3/4" 74430 57430 01-06974431 57431 01-070 N/C74420 57420 01-072

2-3/8" * 74425 57425 01-071 74421 57421 01-073

Deadbolts/Deadlatches (H451/461)SpecifyCombo Add to Lock


2-3/4" 74430 57430 01-07574431 57431 01-076 N/C74420 57420 01-078

2-3/8" * 74425 57425 01-077 74421 57421 01-079

Strikes with LocksSpecifyCombo Add to Lock

Latch strike Deadbolt strike Number Price01-046 010018-1 01-080 01-048 5051-1 01-086 5164 010018-1 01-082

01-049 5051 01-084 N/C01-049 010018-1 01-083 01-048 010018-1 01-085

005099-000-30


H-Series • Latch and Strike Options

* 2-3/8" backset is furnished as a 1" faceplate standard.


Latches and Strikes • H-Series

H-5

Deadlatch Strikes Finishes: 605, 613, 626, 630

Description Lip Length Specify Add to Lock Price

ANSI, 1-1/4" x 4-7/8" 1-5/16" 005164-000 $11.40 Square Corner, T-strike, 1-1/8" x 2-3/4" ** Q001-046 1/4" Radius round corner, full lip 1-5/8" x 2-1/4" ** 1" Q001-048 3.60Square corner, full lip 1-5/8" x 2-1/4" ** Q001-049 ANSI dust box 1" deep, steel - 005099-000-30 2.60

LatchesFinishes: 605, 613, 630

Latch Face Backset & Price

2-3/8" 2-3/4" Price1" Spring Latch A57420-000 A57430-0001" Deadlatch A57420-00D A57430-00D1" Deadlatch (H451, H461) A57620-00D A57630-00D1" Spring Latch - 1/4" Rad. A57420-000 A57431-000 $23.301" Deadlatch - 1/4" Rad. A57421-00D A57431-00D1" Deadlatch - 1/4" Rad. (H451, H461) A57621-00D A57631-00D1-1/8"" Spring Latch A57625-000 A57635-0001-1/8" Deadlatch A57425-00D A57435-00D1-1/8" Deadlatch (H451, H461) A57625-00D A57635-00D

BoltsFinishes: 606, 613, 630

Latch Face Backset & Price

2-3/8" Price 2-3/4" Price1" Deadbolt A74420-000 A74430-0001" Deadbolt - 1/4" Rad. A74421-000 $19.70 A74431-000 $26.901-1/8" Deadbolt A74425-000 A74435-000Drive-In* A76429-000 A76439-000

ScrewsPart Number Description Finishes Size List Price024416-012 Latch and strike screws 605, 606, 613, 626, 630 8-32 x 3/4"combo $ 0.20021164-016 ANSI strike screws 605, 606, 613, 626, 630 12-24 x 1" combo 0.40

*Available in 626 only.

** Not available in 630.


H-Series • Cylinders & Options

H-Series • Complete Cylinders Cylinder Mechanism Part Number Price Each

5-pin cylinder H511 knobs A300405-pin cylinder H all other functions & designs A30028 $40.006-pin cylinder H511 knobs A30040-016-pin cylinder H all other functions & designs A30028-01

* Cylinders are furnished G keyway, keyed differently unless otherwise specified.** Restricted sections see CYL-3. See Keys & Keying for standard keyways. Contact 877-671-7011 for availability.Notes: 1) Finishes: 606 and 626 only.

2) Specify keyway

Notes: 1) Finishes: 606 and 626 only2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections see Cyl-3 for charge. See Restricted Keyway Policy (p.8) for standard keyways andpolicy on use of restricted keyway cylinders. Contact 877-671-7011 for availability.

Small Format Interchangeable Core and Small Format Construction Core Description Specify Add to Lock Price (per core)

Small format core * G SuffixExample: H101GD6

Small format core (Best Style) * BB Suffix $41.00

Example: H101BB6Small format construction core ** H Suffix 29.50Example: H101HD6Less Small format core B Suffix N/CExample: H101BDSmall format disposable core BDC Suffix 3.60Example: H101BDC

Notes: 5) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details

Locks Less Components Description Specify Deduct from Lock Price per latch or strike

Less standard cylinder L suffixExample: H101LD DAN $43.00

Less latch - per latch LLL suffixExample: H101PD DAN 626 LLL/01-080 13.00

Less strike - per strike LLL suffixExample: H101PD DAN 626 01-062 LLL 2.60

Tactile Warning (Abrasive coat)Description Specify Add to Lock Price

Abrasive Preface the design code with 6 $44.20Example: 6DA for DAN

Note: 1) Outside lever only is coated unless otherwise specified.2) Not available in 613



(per core)5 pinned cylinder P Suffix STDExample: H101P6 pinned cylinder P6 Suffix

Example: H101P66 pinned Competitor keyway cylinders* P6 Suffix N/C

available on H101, H511 only Example: H101P6 (0 Bitted, KD, KA4 only)Schlage C (6 pin only) CP6 Suffix

available on H101, H511 only Example: H101CP6 (All other keying, not listed above)




Introduction MA-Series

MA-1

Table of Contents

Function Chart MA-2

MA Complete Lock Pricing MA-4

Option

Conventional Cylinder Options . . . . . . . . . .MA-7

SFIC Cylinder Options . . . . . . . . . . . . . . . .MA-7

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9

Locks Less Components . . . . . . . . . . . . . .MA-12

Non-Standard Door Thickness . . . . . . . . .MA-12

Abrasive Coating and Knurling . . . . . . . . .MA-12

Lead Wrap . . . . . . . . . . . . . . . . . . . . . . . . .MA-12

MA Series Parts

Armor Fronts (Scalps) . . . . . . . . . . . . . . . . .MA-9

Lock Cases . . . . . . . . . . . . . . . . . . . . . . . .MA-10

Knob & Levers . . . . . . . . . . . . . . . . . . . . . .MA-10

Roses and Escutcheons . . . . . . . . . . . . . .MA-11

Screws and Screw Packs . . . . . . . . . . . . .MA-11

Misc. Parts . . . . . . . . . . . . . . . . . . . . . . . . .MA-11

Trim Packs . . . . . . . . . . . . . . . . . . . . . . . .MA-13

Full Body Mortise Deadlocks MA-14



MA 501 P


Cylinder SuffixB = Less SFICBB = With SFIC Core (Best)BDC = Disp. Const. CoreG = With SFIC Core (Falcon)H = With SFIC Keyed Const.



to 6 chambersP7 = 7-Pin Cylinder


Schlage CFunction

See MA-2

Lock Series










Certification ANSI A156.13, Series 1000, Grade 1 Operation and Security, UL Listed for 3-Hour fire door

with SFIC Interchangeable Core Cylinders: Grade 3 Security

Latch 2 piece stainless steel anti-friction bolt 3/4" projection.

Strike 1-1/4" x 4-7/8", ANSI, Square corner, with dust box




Backset 2-3/4"


MA-Series • Functions

MA-2

MA101 F01 Passage/Closet LatchsetLatch bolt by knob/levers at all times.

MA161 F31 Connecting Room/Exit LatchLatch bolt operated by knob/lever frominside. No trim outside. Auxiliary deadlatch.

MA301 F02 Privacy LockLatch bolt by knobs/levers either side,dead bolt by turn inside or emergencyrelease outside.

MA311 F19 Privacy, Bedroom or Bath LockLatch bolt by knobs/levers. Dead bolt byturn from inside and emergency releaseoutside. Rotating inside knob/leverretracts both bolts.

MA321 F22 Privacy LockLatch bolt operated by knob/lever fromeither side except when outsideknob/lever is locked by inside T-turn.Operating inside knob/lever, closing dooror operating outside emergency releaseunlocks outside knob/lever.

MA371* F14 Store Door LockLatch bolt by knobs/levers either side.Dead bolt by key from either side.

MA381 F09 Apartment, Exit LockLatch bolt operated by knob/lever fromeither side, except when outsideknob/lever is locked by key from inside.When outside knob/lever is locked, latchbolt is retracted by key from outside orby operating inside lever. Auxiliary deadlatch.

MA411* F30 Asylum LockLatch bolt operated by key from eitherside. Both knobs/levers alwaysinoperative. Auxiliary dead latch.

MA431 F34 Classroom Security Lock withDeadbolt Latch bolt operated by knob/lever fromeither side except when outsideknob/lever is locked from inside oroutside by key. Dead bolt retracted bykey from inside or outside. Operatinginside knob/lever retracts both bolts andunlocks outside. Latch bolt dead lockedwhen dead bolt is thrown.

MA441 F32 Classroom Security LockLatch bolt operated by knob/lever fromeither side except when outsideknob/lever is locked from inside oroutside by key. When outside knob/leveris locked, latch bolt is retracted by keyfrom inside or outside or by operatinginside knob/lever. Auxiliary dead latch.

MA451 F15 Hotel Guest LockLatch bolt operated by key from outsideor by operating inside knob/lever. Outsideknob/lever is always inoperative. Deadbolt projected by turn from inside and allkeys except emergency key are shut out.Operating inside knob/lever retracts bothbolts. Auxiliary dead latch.

MA521 F04 Entry/Office LockLatch bolt operated by knob/lever fromeither side except when outsideknob/lever is made inoperative by buttons in face. When outside knob/lever is locked, latch bolt is retracted by key from outside or by operating inside knob/lever. Auxiliary dead latch.

MA531 F20 Apartment Corridor Door LockLatch bolt operated by knob/lever from either side, except when outside knob/lever is made inoperative by buttons in face. Dead bolt operated by key outside or turn inside. Key outside operates both bolts. Operating inside knob/lever retracts both bolts and outside remains locked. Latch bolt is deadlocked when outside knob/lever is made inoperative or when the dead bolt is projected. When dead bolt is retracted, knob/lever is unlocked by buttons in face.

ANSI A156.13 Series 1000 Grade 1 Operation

Mortise

FALCON ANSI

Mortise

FALCON ANSI



Functions • MA-Series

MA-3

MA541 F21 Entry/Office LockLatch bolt by knobs/levers either side.Dead bolt by key outside or turn inside.

MA551 F06 Holdback LockLatch bolt operated by lever from eitherside except when outside lever is lockedfrom outside by key. Latch bolt can belocked in a retracted position by key.When outside lever is locked, latch boltis retracted by key from outside or byoperating inside lever unless latch bolthas been locked in a retracted position.Auxiliary dead latch.Note: Chassis is handed

MA561 F05 Classroom LockLatchbolt operated by knob/lever from either side except when outside knob/lever is locked by key. When outside knob/lever is locked, latchbolt is retracted by key from outside or by operating inside knob/lever. Auxiliary latch deadlocks latchbolt when door is closed. Inside knob/lever always free for immediate exit.

MA571 F13 Dormitory or Exit LockLatch bolt operated by knob/lever from either side. Dead bolt projected by key from outside and turn from inside. Operating inside knob/lever retracts both bolts and unlocks outside.

MA581 F07 Storeroom LockLatch bolt operated by key from outside or by operating inside knob/lever. Outside knob/lever is always inoperative. Auxiliary dead latch.

MA621 F08/F10 Front Door / Apartment CorridorLatch bolt is operated by knob/lever from either side, except when outside knob/lever is made inoperative bybuttons in face. Dead bolt is operated by turn inside. Key outside operates both bolts.

MA641 Dormitory LockLatch bolt by knob/lever inside and key outside. Inside knob/lever free. Outside knob/lever rigid. Dead bolt by key outside or T-turn inside. Rotating insideknob/lever retracts both bolts. Deadlocking latch.

MA851 Storeroom-Fail Safe ELLatch bolt operated by knob/lever fromeither side except when outer knob/leveris electrically locked. When outerknob/lever is locked, latch bolt retractedby key in cylinder outside.Deadlocking latch.

MA881 Storeroom-Fail Secure EULatch bolt operated by knob/lever frominside except when outer knob/lever iselectrically unlocked, then latch boltfrom either side. When locked, key incylinder outside retracts latch bolt.Deadlocking latch.

MA911 F29 Classroom Dead LockKey from outside operates dead bolt. Turn from inside retracts but does not project dead bolt.

MA921 F18 DeadlockDead bolt by key outside only.

MA931* F16 DeadlockDead bolt by key from either side.

MA941 F17 DeadlockDead bolt by key outside or turn inside.

MA12/MA18 Dummy TrimSingle or double available.Single (MA12)Double (MA18)

ANSI A156.13 Series 1000 Grade 1 Operation

Mortise

FALCON ANSI

Mortise

FALCON ANSI



MA-Series • Complete Locks

MA-4

HG (Hana-Gala) HN (Hana-Napa)

Note: 1) Specify 12 or 24 VDC.

MA Knob Styles – Hana Designs and Finishes

HANA – GALA HANA – NAPA605 606 613 605 606 613

Function Description 626 625 630 626 625 630

Single Cylinder FunctionsMA521P Entry/OfficeMA541P Entry/OfficeMA551P HoldbackMA561P Classroom $464.00 $476.00 $477.00 $489.00MA571P Dormitory ExitMA581P StoreroomMA531P Apartment CorridorMA621P Front Door 477.00 489.00 484.00 496.00MA641P DormitoryMA451P Hotel 527.00 539.00 539.00 551.00MA851P Elect. Storeroom (Fail Safe) 1

932.00 944.00 940.00 952.00MA881P Elect. Storeroom (Fail Secure) 1

Double Cylinder FunctionsMA371P* Store DoorMA381P Apartment/Exit MA411P* Asylum $529.00 $541.00 $536.00 $548.00MA431P Classroom Security with deadboltMA441P Classroom Security

* CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

Non-Keyed FunctionsMA101 Passage $321.00 $333.00 $331.00 $343.00MA161 Exit/ Connecting 342.00 354.00 353.00 365.00MA301 PrivacyMA311 Privacy 401.00 413.00 418.00 430.00MA321 PrivacyMA12 Half Dummy 125.00 131.00 129.00 135.00MA18 Full Dummy 249.00 261.00 259.00 271.00


Complete Locks • MA-Series

MA-5

Grade 1 Mortise Locks with Cast/Forged or HeavyWrought Trim ANSI-A156.13, SERIES 1000, GRADE 1

AG (Avalon-Gala) DG (Dane-Gala)

QG (Quantum-Gala) SG (Sutro-Gala)Cast Lever

Notes: 1) Specify 12 or 24 VDC.

MA Lever/Rose StylesDesigns and Finishes

AG DG QG SG605 606

Function Description 626 613 625 630

Single Cylinder FunctionsMA521P Entry/OfficeMA541P Entry/OfficeMA551P HoldbackMA561P Classroom $523.00 $535.00MA571P Dormitory ExitMA581P StoreroomMA531P Apartment CorridorMA621P Front Door 538.00 550.00MA641P DormitoryMA451P Hotel 582.00 594.00

MA851P Elect. Storeroom (Fail Safe)1

966.00 978.00MA881P Elect. Storeroom (Fail Secure)1

Double Cylinder FunctionsMA371P* Store DoorMA381P Apartment /Exit MA411P* Asylum $579.00 $591.00MA431P Classroom Security with deadboltMA441P Classroom Security


Non-Keyed FunctionsMA101 Passage $408.00 $420.00MA161 Exit/Connecting 423.00 435.00MA301 PrivacyMA311 Privacy 474.00 486.00MA321 PrivacyMA12 Half Dummy 168.00 174.00MA18 Full Dummy 335.00 347.00


MA-Series • MA Lever Styles

MA-6

Grade 1 Mortise Locks with Cast/Forged or HeavyWrought Trim ANSI-A156.13, SERIES 1000, GRADE 1

AN (Avalon-Napa) DN (Dane-Napa)

QN (Quantum-Napa) SN (Sutro-Napa)Cast Lever

Notes: 1) Specify 12 or 24 VDC.

MA Lever Escutcheon StylesDesigns and Finishes

AN DN QN SN605 606 613

Function Description 626 625 630

Single Cylinder FunctionsMA521P Entry/OfficeMA541P Entry/OfficeMA551P HoldbackMA561P Classroom $564.00 $576.00MA571P Dormitory ExitMA581P StoreroomMA531P Apartment CorridorMA621P Front Door 574.00 586.00MA641P DormitoryMA451P Hotel 624.00 636.00MA851P Elect. Storeroom (Fail Safe)1

1,029.00 1,041.00MA881P Elect. Storeroom (Fail Secure)1

Double Cylinder FunctionsMA371P* Store DoorMA381P Apartment/ExitMA411P* Asylum $619.00 $631.00MA431P Classroom Security with deadboltMA441P Classroom Security


Non-Keyed FunctionsMA101 Passage $442.00 $454.00MA161 Exit/Connecting 457.00 469.00MA301 PrivacyMA311 Privacy 509.00 521.00MA321 PrivacyMA12 Half Dummy 182.00 188.00MA18 Full Dummy 364.00 376.00


Cylinders • MA-Series

MA-7

Conventional Mortise CylindersPins Length Description Number 626 605 606 613 629 630

5 or 6 1-1/8 985 $55.00 $57.001-1/4 Mortise 9861-3/8 987 55.00 57.001-1/2 Mortise 988 65.00 67.00

5, 6, or 7 1-3/4 990 80.00 82.002 992 83.00 85.00

6 1-1/8 2501-1/4 251

6 1-3/8 Mortise, hotel function 252 71.00 73.007 1-3/8 253- 1-1/8 985T- 1-1/4

Mortise, thumbturn986T

85.00 87.00

- 1 984D- 1-1/8 Dummy 985D 34.00 36.00

Small Format Interchangeable Core HousingsCat. Number Length Pins Description 626 605 606 613 629 630

C987-xx 1 3/8" 6 or 7 Mortise $34.30 $36.30C988-xx 1 1/2" 6 or 7 MortiseC990-xx 1 3/4" 6 or 7 Mortise 40.60 42.60 C992-xx 2" 6 or 7 Mortise 42.60 44.60 C977-xx Fits Adams Rite 6 or 7 Mortise, tapered head 36.40 38.40 C997-xx 1 3/8" 6 or 7 Mortise, unassembled, less cam 27.00 29.00 C262-xx 1 5/8" 6 or 7 Mortise, hotel function RH 57.20 59.20 C265-xx 1 5/8" 6 or 7 Mortise, hotel function LH

* Cylinders are furnished 5-pin G keyway, keyed differently unless otherwise specified.** Restricted sections see CYL-3. See keys & keying for standard keyways. Contact 877-671-7011 for availability.*** Hotel mortise cylinder are only offered as Master keyed or 6-pin 0-bitted and must be specified. If not specified, 0-bitted

furnished.

Notes: 1) MA cam provided unless otherwise specified. 2) For 7-pin conventional add $11.503) All mortise cylinders will be furnished with cam 5622-STD, except for MA381 function which will be supplied with 5620-STD and 5621-STD. See CYL-12 for additional available cams.

4) Mortise and rim cylinders are not available in any competitor keyway, except Schlage C.5) 984D, 985D not available in 629 and 630.6) Conventional mortise cylinder with Schlage C keyway are available with the following cams only, 02-069 & A7809.7) Add $9.00 (list) for Falcon restricted keyways. See page 8 for standard keyways. All others are restricted. Falcon conventional cylinder restricted keyways use a unique pin kit (P/N 1417) and cutter wheel for keys.

Notes: 1) All mortise cylinders will be furnished with cam 5622-STD, except for MA381 function which will be supplied with 5620-STD and 5621-STD. See CYL-12 for additional available cams.

2) C977 is only furnished with 012667-001 Adams Rite Cam


MA-Series • Cylinder Options

MA-8

Conventional Cylinder options


(per core)5 pinned cylinder P Suffix STD

Example: MA581P6 pinned cylinder P6 Suffix N/C

Example: MA581P67 pinned cylinder P7 Suffix $11.50

Example: MA581P76 pinned Competitor keyway cylinders* P6 Suffix

Example: MA581P6 (0 Bitted, KD, KA4 only) N/CSchlage C (6 pin only) CP6 Suffix

Example: MA581CP6 (All other keying, not listed above)




Example: MA581GD6Small format core (Best Style) * BB Suffix $41.00

Example: MA581BB6Small format construction core ** H Suffix 29.50

Example: MA581HD6Less Small format core B Suffix N/C

Example: MA581BDSmall format disposable core BDC Suffix 3.60

Example: MA581BDC






Strikes and Armor Fronts • MA-Series

MA-9

MA-Series Strikes with LocksAdd to Lock Price

Description Lip Length Specify 605, 606, 613, 629, 630Standard - 1-3/4" Door Thickness 1-1/4" A8737-1Optional - 2" Door Thickness 1-7/16" A8737-2 N/COptional - 2-1/4" Door Thickness 1-9/16" A8737-3Optional - 2-1/2" Door Thickness 1-11/16" A8737-4Optional - 1-3/4" Door Thickness 7/8" A8737-5

MA-Series Strikes Sold Separately605 606 613

Description Lip Length Specify 626 625 630Standard - 1-3/4" Door Thickness 1-1/4" A8737-1 $16.00 $19.00Optional - 2" Door Thickness 1-7/16" A8737-2Optional - 2-1/4" Door Thickness 1-9/16" A8737-3 21.20 24.20Optional - 2-1/2" Door Thickness 1-11/16" A8737-4Optional - 1-3/4" Door Thickness 7/8" A8737-5

MA-Series Armor Fronts (Scalps) Sold SeparatelyDescription Part Number 626 605 606 613

625 630

MA101, 321 S77801-LLMA521 S77804-LLMA161, 381, 411, 441, 561, 581, 851, 881, 551 S77805-LLMA621 S77811-LL $31.80 $34.80MA451, 641 S77815-LLMA911, 921, 931, 941 S77816-LLMA301, 311, 371, 541, 571, 431 S77819-LLMA531 S77820-LL

Notes: 1) Armor front is included in complete MA lock


MA-Series • Cases and Trim

MA-10

MA-Series Lock Case

Part Number Description List Price

A7801-xx MA101 $185.00A7831-xx MA161 175.00A7802-xx MA301A7819-xx MA311 205.00A7822-xx MA321A7814-xx MA371A7809-xx MA381 229.00A7830-xx MA411A7815-xx MA451 260.00A7804-xx MA521 229.00A7820-xx MA531 304.00A7821-xx MA541A7805-xx MA561, 441A7813-xx MA571, 431 229.00A7807-xx MA581A7808-xx MA621A7815-xx MA641 260.00A7806-xx MA551 229.00

A7851-12-xx MA851 12VA7851-24-xx MA851 24V 548.00A7881-12-xx MA881 12VA7881-24-xx MA881 24V

A7829-xx MA911 167.00A7816-xx MA921, 931, 941

MA-Series Lever & Knob Assemblies

Part Number DescriptionList Price

605 606 613626 625 630

AS76029-L/RH Avalon, sectional trimAS76140-L/RH Quantum, sectional trimAS76526-L/RH Sutro, sectional trimAS76280-L/RH Dane, sectional trimAS76100-L/RH Hana, sectional trim $102.00 $105.00AE77029-L/RH Avalon, escutcheon trimAE77140-L/RH Quantum, escutcheon trimAE77526-L/RH Sutro, escutcheon trimAE77280-L/RH Dane, escutcheon trimAE77100-L/RH Hana, escutcheon trim

Notes: 1) xx Specify handing: RH= Right hand. LH= Left hand. RR = Right hand reverse. LR = Left hand reverse. (Example: A7801-RH).

2) Does not include armor front

MA-Series RoseList Price

Part Number Description605 606 613

626 625 630S76012 Rose, Gala $26.20 $29.20

AS75319 Thumbturn assembly for sectional trim for MA301, MA311 35.60 38.60MA321 when door thickness is less than 2"

AS76319 Thumbturn Assembly for sectional trim for all functions except 35.60 38.60MA301, MA311, MA321 when door thickness is less than 2"

AS76853 Emergency Turn for MA301, 311, 321 26.50 29.50

Notes: 3) Specify finish and handing4) Lever assemblies include one lever assemblies with spring cage.5) Order escutcheon and rose separately

Notes: 6) Specify finish


Trim, Screws and Parts • MA-Series

MA-11

MA-Series Escutcheons


605 606 613626 625 630

AE77012-OP Napa, Outside lever openingAE77012-OC Napa, Outside Cylinder and lever openingsAE77012-OK Napa, Outside Cylinder only opening $61.90 $64.90AE77012-OT Napa, Outside Emergency key and lever opening

E77012-IP Napa, Inside lever openingE77012-IB Napa, inside Blank, no lever opening

AE77012-IT Napa, Inside lever opeining with thumbturn attached 72.30 75.30E77012-IC Napa, Inside Cylinder and lever opening 61.90 64.90

AE77012-IE Napa, Inside no lever opening with thumbturn attached 72.30 75.30E77012-IK Napa, Inside Cylinder only opening 61.90 64.90


MA-Series Screw Packs


606 613 630S76300 1-3/8" - 1-7/8" door thickness, sectional trim with leversS76301 Over 1-7/8" - 2-1/2" door thickness, sectional trim with leversE77300 1-3/8" - 1-7/8" door thickness, escutcheon trim with leversE77301 Over 1-7/8" - 2-1/2" door thickness, escutcheon trim with leversS76302 1-3/8" - 1-7/8" door thickness, sectional trim with knobsS76303 Over 1-7/8" - 2-1/2" door thickness, sectional trim with knobs $20.30E77302 1-3/8" - 1-7/8" door thickness, escutcheon trim with knobsE77303 Over 1-7/8" - 2-1/2" door thickness, escutcheon trim with knobsS76306 Torx screw pack, sectional trim, no turnS76307 Torx screw pack, sectional trim, with turnE77306 Torx screw pack, escutcheon trim, standardE77307 Torx screw pack, escutcheon trim, over 1-7/8" – 2-1/2" door thickness

MA-Series Miscellaneous Parts

Part Number Description List Price

PE1396 Dust Box, standard with lock $4.20005099-000 Metal Dust Box 8.30

S76806 Spindles (2) for lever on standard door thickness or knob on 5.40door thickness 1-7/8" - 2-1/2"

S76816 Spindles (2) for lever on door thickness 1-7/8" - 2-1/2" 5.40S76206 Spindles (2) for knob on standard door thickness 5.40S76802 Spindles (2) for connecting door, MA161 5.40AS5813 Mounting plate for use with no outside trim 14.40


3) Non torx screw packs contains armor front screws, strike screws, trim screws, mortise screws, spindle, mounting posts

4) Torx screw packs contain armor front, strike and trim screws only


MA-Series • Options

MA-12



Less each knob or lever LLL for knob/lever designExample: MA581P LLL/DG x DG $23.50

Less each escutcheon LLL for escutcheon designExample: MA581P DN x DN/LLL 25.20

Less each rose LLL for rose designExample: MA581P DG x DG/LLL 6.50

Less standard cylinder L suffixExample: MA581L DG 55.00

Less standard hotel cylinder L suffixExample: MA451L DG 55.00

Less armor front LLL for latchExample: MA581P DG 626 LLL 21315R 21.30

Less strike LLL for strikeExample: MA581P DG 626 20099 LLL 11.00

Non-Standard Door ThicknessDescription Specify Add to Lock Price

Over 1 7/8" – 2 1/2" thick doors Door thickness and how door is extended $77.60Example: 2", EE

AbrasiveDescription Specify Add to Lock Price

6 Prefix Example: 6 DG for Dane Gala*$53.70*Not available in 613

KnurlingDescription Specify Add to Lock Price

8 Prefix Example: 8 DG for Dane Gala** $80.50**Only available in 626 finish and levers only

Lead WrapDescription Specify Add to Lock Price

9 Prefix Example: 9 DG for Dane Gala $173.00

IndicatorsDescription Specify Add to Lock Price

OCCUPIED/VACANT message indicator. Add M Suffix to trim.For Sectional and Escutcheon Trim Example: DGM for Dane Gala

$87.80

Note: 1) MA-series locks ordered less all components will be furnished as lock cases. See MA-10 for part numbers.2) Sum of applicable deducts, use DG (Dane Gala) and specified finish for base price.

Notes: 3) Must indicate how lock will be extended: Extended Inside (EI) on non-thumb turn functions onlyExtended Outside (EO) on all functionsExtended Equally (EE) on all functions

Notes: 4) Extended lead times apply.

Notes: 5) Extended lead times apply.

Notes: 6) Available on the following functions: MA301, MA311, MA321, MA371, MA431, MA451, MA541, MA571, MA641, MA921, MA931, MA941 on the outside of door.Available on the following functions: MA441 on the inside of door.Available in 626 (Satin Chrome) or 630 (Satin Stainless) finish only.


Trim Packages • MA-Series

MA-13

MA-Series Trim Packages

Cat. List Price

Number Function Specify Style605 606 613

626 625 630TP 50 S 101, 371, 381, 411, 431, 441, 521, 551, 561, 581, 851, 881 Dane, Sutro, Avalon, Quantum, Hana $276.00 $282.00TP 60 C 301, 311, 321 Dane, Sutro, Avalon, Quantum, Hana 302.00 308.00TP 70 T 451, 531, 541, 571, 621, 641 Dane, Sutro, Avalon, Quantum, Hana 322.00 328.00TP 55 E 101 Dane, Sutro, Avalon, Quantum, Hana 333.00 339.00TP 65 E 311, 321, 301 Dane, Sutro, Avalon, Quantum, HanaTP 75 E 431, 441, 411, 371, 381 Dane, Sutro, Avalon, Quantum, Hana 348.00 354.00TP 85 E 551, 881, 851, 581, 561, 521 Dane, Sutro, Avalon, Quantum, HanaTP 95 E 641, 541, 531, 571, 621, 451 Dane, Sutro, Avalon, Quantum, Hana

Notes:S = Sectional, No Thumbturn, up to 2 cylindersC = Sectional, Thumbturn, no cylinderT = Sectional, Thumbturn & cylinderE = Escutcheon Trim

1) Specify Lever/Knob style and finish2) Contains inside and outside trim, screw pack with mounting hardware


MA-Series • Full Body Mortise Deadlocks

MA-14

ANSI-A156.13, SERIES 1000, GRADE 1

Notes: 1) If ordered with Napa Escutcheon Trim - add $105 (both sides will be included)2) Deadlock case comes with appropriate scalp (front).

MA Series Mortise Deadlocks (No Knob or Lever Trim)

Function DescriptionList Price

605 606 613626 625 630

MA911P Classroom Deadlock $319.00 $325.00MA921P Deadlock by key outside 286.00 292.00MA931P* Deadlock by key from either side, Double Cylinder lock 313.00 319.00MA941P Single Cylinder, Thumbturn inside 390.00 396.00

*CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.


Introduction RU-Series

RU-1

Table of Contents

Function Chart RU-2

Complete Lock Pricing RU-3

Order Detail RU-4

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4

Cylinder Requirements . . . . . . . . . . . . . . . .RU-5

Competitor Cylinders . . . . . . . . . . . . . . . . . .RU-6

Parts RU-7

Complete Cylinders . . . . . . . . . . . . . . . . . . .RU-7

Interchangeable Core Options . . . . . . . . . .RU-7

Conventional Cylinder Options . . . . . . . . . .RU-7

Locks Less Components . . . . . . . . . . . . . . .RU-8

Non-Standard Door Thickness . . . . . . . . . .RU-8

Tactile Warning . . . . . . . . . . . . . . . . . . . . . .RU-8

Lead Lining . . . . . . . . . . . . . . . . . . . . . . . . .RU-8

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-9

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-9

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-10

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-10

Spring Cage Conversion Kit . . . . . . . . . . .RU-10

Misc. Parts . . . . . . . . . . . . . . . . . . . . . . . . .RU-11

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11

Tailpieces . . . . . . . . . . . . . . . . . . . . . . . . . .RU-12







Strike 1-1/4" x 4-7/8", ANSI, Square corner, with dust box





RU 501 P D


Cylinder SuffixB = Less SFICBB = With SFIC Core (Best)BDC = Disp. Const. CoreG = With SFIC Core (Falcon)H = With Keyed Const.

CoreJ = Full Size IC

(Specify Manufacturer)L = Less 6-Pin CylinderP = 6-Pin Cylinder pinned


to 6 chambersP7 = 7-Pin Cylinder


Schlage C

FunctionSee RU-2

Lock Series


RU101 F36 Passage/Closet LatchsetLatch bolt by levers at all times.

RU301 F37 Privacy/Bedroom/Bath LockLatch bolt by levers. Outside lever lockedby push button in inside lever. Rotatinginside lever or closing door releases pushbutton. Emergency release in outsidelever unlocks door.

RU381 F45 Classroom Security LockLatchbolt operated by lever from eitherside except when key from inside leverlocks outside lever. When outside lever islocked, latchbolt retracted by key inoutside lever or by turning inside lever.

RU411 Asylum Lock*Deadlocking latch bolt by key fromeither side at all times. Both leversinoperable.

RU501 F41 Entry LockPush button locking. Button on insidelocks outside lever until unlocked by keyor by rotating inside lever. Inside lever always free. Deadlocking latch bolt.

RU511 F40/F41 Entry/Office LockTurn/push button locking. Pushing andturning button locks outside leverrequiring use of key until button ismanually unlocked. Push button locking.Pushing button locks outside lever untilunlocked by key or by rotating insidelever. Inside lever always free.Deadlocking latch bolt.

RU521 F40 Office LockTurn button locking. Turning buttonlocks outside lever requiring use of keyuntil button is manually unlocked. Insidelever always free. Deadlocking latch bolt.

RU561 F42 Classroom LockDeadlocking latch bolt by levers. Outsidelever is locked by key in outside lever.Inside lever is always free.

RU571 F48 Dormitory LockDeadlocking latch bolt by levers exceptwhen locked by push button in insidelever. Key in outside lever locks orunlocks lever and releases button.Closing door releases push button. Insidelever always free.

RU581 F44 Storeroom LockDeadlocking latch bolt by lever inside orkey outside. Outside lever is inoperable.Inside lever always free.

RU851 Storeroom (Electrified-Fail Safe)Latch bolt operated by lever from eitherside except when outer lever iselectrically locked. When outer lever islocked (inoperable), latch bolt retractedby key in cylinder outside. 24 volt DC.185 Amps, continuous duty.

RU881 Storeroom (Electrified-Fail Secure)Deadlocking latch bolt operated by leverinside at all times. Outside leverinoperable until electrically unlocked,then latch bolt from either side. Whenoutside lever is inoperable, latch boltretracted by key in cylinder outside. 24 volt DC .185 Amps, continuous duty.

ANSI A156.2, Series 2000 Grade 1

Retrofit Locks

FALCON ANSI

Retrofit Locks

FALCON ANSI


RU-Series • Functions

RU-2



Complete Locks • RU-Series

RU-3

Grade 1 Heavy Duty Unit Lock Retrofit Key-In-Lever Lockset ANSI- A156.2, GRADE 1



D Q D

Function Description 626 613

Single Cylinder FunctionsRU501PD EntryRU511PD Entry/OfficeRU521PD Entry/OfficeRU561PD Classroom $649.00 $661.00RU571PD DormitoryRU581PD StoreroomSingle Cylinder Functions - ElectrifiedRU8511PD Elec. Storeroom – Fail Safe $982.00 $994.00RU8811PD Elec. Storeroom – Fail SecureDouble Cylinder FunctionsRU381PD Classroom Security

$716.00 $728.00RU411PD AsylumDouble cylinder locks on residences and any door in any structure which is

*CAUTION: used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

Non-Keyed FunctionsRU101S Passage $539.00 $551.00RU301S Privacy 609.00 621.00


RU-Series • Latches, Strikes

RU-4

Latches with LocksBackset Description Specify Add to Lock Price

Latch height 1-3/4" 314691Latch height 2-1/16" 314692Latch height 2-5/8" 314693 N/C

2-3/4" Latch height 2-11/16" 314694Latch height 1-3/4" x 3/4 Proj. 315491Latch height 2-1/16" x 3/4 Proj. 315492 $127.00Latch height 2-5/8" x 3/4 Proj. 315493Latch height 2-11/16" x 3/4 Proj. 315494

Latches sold separateFinishes: 613, 626

Backset Description Spring Latch Dead Latch List PriceLatch height 1-3/4" x 1/2 Proj. A31469-001 A31469-01D $83.10Latch height 2-1/16" x 1/2 Proj. A31469-002 A31469-02D 109.00Latch height 2-5/8" x 1/2 Proj. A31469-003 A31469-03D

2-3/4" Latch height 2-11/16" x 1/2 Proj. A31469-004 A31469-04D 115.00

Latch height 1-3/4" x 3/4 Proj. - A31549-01DLatch height 2-1/16" x 3/4 Proj. - A31549-02D 164.00Latch height 2-5/8" x 3/4 Proj. - A31549-03DLatch height 2-11/16" x 3/4 Proj. - A31549-04D

Strikes with LocksDescription Specify Add to Lock Price

ANSI, 1-1/4" x 4-7/8" standard 5164Early Corbin Russwin single door 031471 N/CEarly Corbin Russwin single door 31471SEarly Corbin Russwin pair doors 031472Yale Mono Pair of Doors 031473 $76.20Early Corbin 031474Early Russwin Unit Lock 0314771" deep for 4-7/8" high ANSI strike, dust box 005099-000 30 N/C3/4 deep for 3-1/4" high strike, dust box 031453-000 30 1.70

Strikes sold separateFinishes: 613, 626, 630


ANSI, 1-1/4" x 4-7/8" standard 005164-000 $11.40Early Corbin Russwin single door 031471-000Early Corbin Russwin single door 031471-001 13.60

Early Corbin Russwin pair doors 031472-000Yale Mono Pair of Doors 1-3/16" 031473-000 73.30Early Corbin 031474-000Early Russwin Unit Lock 031477-0001" deep for 4-7/8" high ANSI strike, dust box - 005099-000 30 2.603/4 deep for 3-1/4" high strike, dust box - 031453-000 30 1.70


Order Detail • RU-Series

RU-5

Ordering Format Catalog Trim Latch Strike

Qty. Number Design Finish Height Part No. Hand Cylinder Other Requirements

8 RU521 D 626 1 3/4" 031471-000 RH Less IC-CR Cylinder

When evaluating the retrofit requirements for an RU Series lockset, the following ques tions need to be answered.

① Which manufacturer’s unit lock is currently installed?

❏ Russwin ❏ Corbin ❏ Corbin Russwin ❏ Yale ❏ Falcon

➁ What is the existing latch height? To determine latch height measure existing latch height as shown here:

Latch heights currently identified and the manufacturer:

1. 1 3/4" Most Corbin & Russwin sold 1949 thru current; Yale 62002. 2 1/16" Corbin, Falcon3. 2 5/8" Certain Corbin (0)2400 Series sold 1913-19534. 2 11/16" Russwin 2100 & 2800 Series sold 1904-1968

③ What is the existing strike condition?

④ What is the existing door thickness?

Locks are for 1-3/4" thick doors only.

0005164-000 031477-000Early Russwin

Unit Lock

031474-000Early Corbin

031471-000Note: Strike, Door and Lock

Same Center LineEarly Corbin Russwin

Single Door

031471-001Note: Strike Center Line is not

the Same as Door and LockEarly Corbin Russwin

Single Door

031472-000Early Corbin Russwin

Pair of Doors

031473-000Yale Mono

Pair of Doors

DOOR LA T CH

CUT OUT HEIGHT

1 - 1/4"

3 - 3/8 "

4- 1/8 "

4- 7/8 "

1 -5/6"

1 - 15/6"

2 -5/8"

1 - 3/8"

1 - 15/16"

4- 13/16 "

4 "

1 - 1/8" 9/16"

3 - 11/32"

1 - 1/2" 2 - 1/8"

5/8"

4-5/32 "

1 - 1/4"

1 - 3/4"

1 - 1/8" 9/16"

1 -9/16"

2 - 1/4"

2 - 1/8"

2 -5/8" 3 - 1/4"

2 - 1/4"

1 - 1/8" 9/16"

1 -9/16"

2 - 1/8"

2 -5/8" 3 - 1

1 - 7/8"

1 - 1/8"

2 - 1/4"

2 -5/8" 3 - 1/4 "

1 - 3/8" 11/16"

1 - 7/8"

1 - 1/8"

2 - 1/4"

2 -5/8" 3 - 1/4 "

1 - 3/8" 11/16"


RU-Series • Order Detail Cont.

RU-6

Specify cylinder requirements. (Note: Locks furnished with Falcon’s standard “G” keyway cylinder or prepared for Falcon interchangeable core unless otherwise specified.)

With Cylinder

Falcon IC

❏ 6-pin❏ 7-pin

Falcon Standard

❏ 6-pinspecify keyway


Competitors’ Keyways - 6-pin Standard Cylinder*

❏ Corbin - 60, 0 Bitted, KD❏ Russwin - D1, 0 Bitted, KD❏ Sargent - LA, 0 Bitted, KD (Also accepts LB, LC keys)❏ Schlage - C, 0 Bitted, KD, KA4❏ Schlage - E, 0 Bitted❏Yale - 8 (Para), 0 Bitted, KD

Less Cylinder - Prepared to Accept**

❏ Falcon IC

Falcon Standard

❏ 6-pin❏ 7-pin

Unit / Mono Lock Cylinders

❏ Falcon Standard (R Series old small plug) 6-pin❏ Corbin Russwin Unit Lock (2000-052) - Master Ring not available

❏ Medeco Unit Lock Retrofit Cylinder(20W5005) - Corbin Russwin Unit Lock

❏ Medeco Unit Lock Retrofit Cylinder(20W0500) - Yale 6200 Mono Lock

❏Yale Mono Lock (1801) and later models

Competitors’ Standard Cylinders

❏ Assa (65611 or 65661) 6-pin❏ Corbin Russwin (2000-034 / CL3400) 6-pin-Master Ring not available

❏ Medeco (20W200V3) 6-pin- tailpiece supplied by Medeco - Falcon / Schlage style

❏ Peaks (Kaba) 6-pin❏ Primus (Schlage) 6-pin❏ Sargent (6, 7 & 10 Line) 6-pin - Keso not available❏ Schlage 6-pin❏Yale (1801) 6-pin - Bicentric not available

Competitors’ IC❏ Arrow 6, 7-pin❏ Assa (70600IC & V70600IC) 6-pin❏ Best 6, 7-pin❏ Corbin Russwin (8000) 6-pin❏ Corbin Russwin (8000-7) 7-pin❏ InstaKey❏ Medeco 31 Series 6-pin❏ Medeco 32 Series 6-pin❏ Medeco Keymark 6, 7-pin❏ Peaks (Kaba) 6, 7-pin❏ Primus (Schlage) 6-pin❏ Sargent (6300) 6-pin❏ Schlage 6-pin❏Yale (1210) 6-pin

* Generic replacement cylinders with competitors’ keyways. ** Proper tailpiece supplied unless otherwise noted.


RU-7

Competitors’ I-Cores & Competitors’ Standard Cylinder • RU-Series

Compatibility with Competitors’ I-Cores

Compatibility with Competitors’ Standard Cylinders

The RU Series is furnished with Falcon’s standard “G” keyway cylinder unless otherwise specified. The RU Series accepts the following competitors’ standard 6-pin cylinders.

❏ Assa (65611 or 65661) 6-pin

❏ Corbin Russwin (2000-034 / CL3400) 6-pin - Master Ring not available

❏ Medeco (20W200V3) 6-pin - tailpiece supplied by Medeco- Falcon / Schlage style

❏ Peaks (Kaba) 6-pin

❏ Primus (Schlage) 6-pin

❏ Sargent (6, 7 & 10 Line) 6-pin - Keso not available

❏ Schlage 6-pin

❏ Yale (1801) 6-pin - Bicentric not available

Falcon’s standard interchangeable core option. Specify 6 or 7-pin.Locksets with this option also accept Schlage SFIC, Arrow (in clud ing FlexCore), Best (including PKS & Peaks), InstaKey, Kaba Peaks, Keymark andKSP cores.

The following larger format interchangeable cores will work with the T Series locksets when lockset is so specified:

Assaold and new styleSpecify IC-AS

Corbin Russwin8000 or 8000-7Specify IC-CR6or IC-CR7

Medeco32 Series 6-pinSpecify IC-ME

Medeco31 Series 6-pinSpecify IC-YA6

Sargent6300

Specify IC-SA

Schlage 6-pinincluding PrimusSpecify IC-SC

Yale 6-pinSpecify IC-YA6

Falcon

Assa CorbinRusswin

Medeco32

Medeco31

Sargent6300

Schlage Yale

Price Book 108AEffective July 18, 2011 • Rev. 7/11RU-8

RU-Series • Cylinder Options

RU Series • Complete Cylinders Cylinder Mechanism Part Number Price Each

5 pin cylinder RU series (except 381 IS, 571) A23151-055 pin cylinder RU series 381 IS A23151-065 pin cylinder RU series 571 A23151-07 $43.006 pin cylinder RU series (except 381 IS, 571) A23161-056 pin cylinder RU series 381 IS A23161-066 pin cylinder RU series 571 A23161-077 pin cylinder RU series (except 381 IS, 571) A23171-057 pin cylinder RU series 381 IS A23171-06 53.007 pin cylinder RU series 571 A23171-07

Conventional Cylinder Options Description Specify Add to Lock

Price (per core)

5 pinned cylinder P Suffix STDExample: RU581P

6 pinned cylinder P6 Suffix N/CExample: RU581P6

7 pinned cylinder P7 Suffix $11.50Example: RU581P7

6 pinned Competitor keyway cylinders* P6 Suffix Example: RU581P6 (0 Bitted, KD, KA4 only)

Schlage C (6 pin only) CP6 Suffix N/C

Example: RU581CP6 (All other keying, not listed above)

Note: 1) Finishes: 606 and 626 only2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections see Cyl-3 for charge. See Restricted Keyway Policy (p.8) for standard keyways andpolicy on use of restricted keyway cylinders. Contact 877-671-7011 for availability.

Interchangeable Core and Small Format Construction Core Description Specify Add to Lock

Price (per core)

Small format core * G SuffixExample: RU581GD6 $41.00

Small format core (Best Style) * BB SuffixExample: RU581BB6

Small format construction core ** H Suffix 29.50Example: RU581HD6

Less Small format core B SuffixExample: RU581BD N/C

Less Full Size core J SuffixExample: RU581JD SCH x DAN

Small format disposable core BDC Suffix 3.60Example: RU581BDC


Note: 5) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for detailspolicy on use of restricted keyway cylinders. Contact 877-671-7011 for availability.

* Keying must be specified

** Locks are assessed one non-refundable handling charge (50-231F) per core.


Less Components, Thick Door, Tactile Warning, Lead Lining • RU-Series

RU-9

Locks Less Components Description Specify Deduct from

Lock Price

Less standard cylinder L suffixExample: RU581LD DAN $43.00

Less latch LLL suffixExample: RU581PD DAN 626 LLL/5164 53.20

Less strike LLL suffixExample: RU581PD DAN 626 314691 LLL 7.80

Tactile Warning (Abrasive coat)Description Specify Add to

Lock Price

Abrasive Preface the design code with 6Example: 6DA for DAN $53.20

Lead LiningDescription Specify Add to

Lock Price

Lead lining Preface the design code with 9Example: 9DA for DAN $235.00

Note: 1) Not available on 613.

Levers, Conventional CylinderPart Number Description List Price030742-000 Dane lever, closed030742-001 Dane lever, open $40.50

030744-000 Quantum lever, closed030744-001 Quantum lever, open030929-002 Lever, Dane open (Corbin Russwin, Medeco, Yale unit) 48.10030929-003 Lever, Quantum open (Corbin Russwin, Medeco, Yale unit)030996-002 Lever, Dane open (Sargent 6, 7 & 10 line, Yale) 54.10030996-003 Lever, Quantum open (Sargent 6, 7 & 10 line, Yale)A30753-00* Inside lever w/set screw, closedA30753-01* Inside lever w/set screw, open 33.10

A31544-00* Inside lever w/set screw, closed 851/881 82.70

Levers and related parts, Small Format and Large Format Interchangeable CorePart Number Description List Price030742-002 Lever, Dane SFIC $40.50030744-002 Lever, Quantum SFIC030926-002 Lever, Dane IC, ASSA, Medeco, Yale 86.60030926-003 Lever, Quantum IC, ASSA, Medeco, Yale030927-002 Lever, Dane IC, Schlage 86.90030927-003 Lever, Quantum IC, Schlage030928-002 Lever, Dane IC, Corbin Russwin 84.00030928-003 Lever, Quantum IC, Corbin Russwin030930-002 Lever, Dane IC, Sargent 79.00030930-003 Lever, Quantum IC, Sargent

RosesPart Number Description List Price031452-000 Rose, square $27.60

* Specify design prefix D (Dane), Q (Quantum)


RU-Series • Trim

RU-10

Note: 1) Dane available in 626 and 613 Quantum available in 626.


Miscellaneous Parts • RU-Series

RU-11

Miscellaneous PartsPart Number Description List Price

022104-000-30 Short Slide Catch $ 0.68022105-000-30 Slide Catch 2.00022106-002-55 Retractor 2.50022108-000-60 Retractor Spring 4.90022112-000-30 Retainer, Retractor Spring 1.40022986-001-50 Retractor Insert 0.52030703-000-30 Inner Spindle, Passage and Button Functions 21.40030704-002-30 Lever Stop Plate 3.10030709-000-60 Clutch Spring 0.32030712-000-30 Mounting Plate, Inner 3.00030712-001-30 Mounting Plate, Outer 2.60030718-000-30 Key Spindle, std 3.90030718-001-30 Key Spindle, IC 030722-000-30 Dogging Bar 2.50030724-000-30 Lever Retaining Ring 0.52030726-000-30 Flanged Nut 6.00030726-007-30 Flanged Nut, Inner Electrified 8.40

030728-000 Push Button Cap 7.80030733-000-55 Spindle Inner 2.80031416-000-70 Solenoid, Fail Safe RU851 312.00031511-000-30 Hex Nut, 1/-28 Special 6.60031514-000-30 Solenoid Mount 8.50031519-000-30 Inner Spindle, RU851/881 33.80

1387 Hex Key – 1/8" with Looped Handle 12.701388 Hex (castle) Not installation tool 29.30

A30746-000-00 Hub & Housing Assembly 12.50A30747-000-00 Hub & Plate Assembly 11.50A30749-060-00 Insert & Spindle Assembly, Outer, 6 Pin 82.00A30749-070-00 Insert & Spindle Assembly, Outer, 7 Pin 49.00A30905-001-00 Spindle & Driver Assembly, ICA30905-060-00 Spindle & Driver Assembly, 6 Pin 46.00A30906-070-00 Spindle & Driver Assembly, 7 PinA30913-000-00 Key Spindle Assembly, Inner Std.A30913-001-00 Key Spindle Assembly, Inner IC 139.00

Q330-272 RU Lock Spring Cage Kit (for all functions except RU101 and RU301)Q330-273 RU Lock Spring Cage Kit (RU101 and RU301) 33.00

ScrewsPart Number Description Finishes Size List Price002762-000 RU latch screw 606, 613, 626 8-32 x3/8 $ 0.24

002770-016-30 Insert screws – 10-32 x 1 0.38021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo 0.40024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4"combo 0.22

030755-005-30 Type D screw – 8-32 x 5/16" 0.28030831-004-30 Set screw – 1/4-20 x 1/4" 0.46031533-006-30 Self tap screw – 8-32 x3/8" 0.34031541-006-30 Mounting plate screws – 8-32 x 1/2" 0.36

Tailpieces for Conventional CylindersCylinder Std. Functions RU381 Inside RU571 Price

Falcon 6-pin* (10/pack) A30730-001-00 A30730-003-00 A30730-002-00 $16.50 pkg. of 10Falcon 7-pin (10/pack) A30730-002-00 A30730-004-00 A30730-006-00 16.50 pkg. of 10Sargent 6 & 10 Line 030997-001-30 030997-003-30 030997-005-30 8.60 eachYale1801, 5801 030917-001-30 030917-003-30 030917-005-30 24.50 eachCorbin Russwin 030994-001-30 030994-003-30 030994-005-30 46.10

*Assa 65611 and 65661; Corbin Russwin 2000-034 and Schlage, including Primus, all use the Falcon 6-pin tailpiece;

IC Throw Members (Tailpieces)Core Type Std. Functions RU381 Inside RU571 Price

Falcon 6-pin* 030739-000-30 030739-002-30 030739-000-30 $1.70Falcon 7-pin* 030739-001-30 030739-003-30 030739-001-30 1.70Corbin Russwin 8000 and Sargent 6300 031468-000-30 031468-002-30 031468-004-30 5.30Corbin Russwin 8000-7 (7-pin) 031468-001-30 031468-003-30 031468-005-30 5.30Medeco 32 Series & ASSA A30988-000-00 A30988-002-00 A30988-004-00 4.40Schlage full size, including Primus 031467-000-30 031467-002-30 031467-004-30 10.70Yale and Medeco 31 Series 6-pin 030917-001-30 030917-003-30 030917-005-30 25.10

*Arrow, Best, InstaKey. Kaba Peaks, Keymark, KSP and Schlage small format cores all use the Falcon configuration.


RU-Series • Cylinder & IC Parts

RU-12

Table of Contents

Function Chart T-2

Complete Lock Pricing T-3

Options & Parts T-4

Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-4

Tailpieces . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-5

Order Detail . . . . . . . . . . . . . . . . . . . . . . . . . .T-6

Competitor Cylinders . . . . . . . . . . . . . . . . . . .T-7

Locks Less Components . . . . . . . . . . . . . . . .T-8

Non-Standard Door Thickness . . . . . . . . . . . .T-8

Tactile Warning . . . . . . . . . . . . . . . . . . . . . . . .T-8

Lead Lining . . . . . . . . . . . . . . . . . . . . . . . . . . .T-8

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10

Spring Cage Conversion Kit . . . . . . . . . . . . .T-10

Misc. Parts . . . . . . . . . . . . . . . . . . . . . . . . . .T-11

Chassis Assemblies . . . . . . . . . . . . . . . . . . .T-12

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-12















T 501 P D



CoreJ = Less FSIC (designate

cylinder manufacturer)L = Less 6-Pin CylinderP = 6-Pin Cylinder pinned




Schlage C

FunctionSee T-2

Lock Series



T-1

Introduction T-Series

T101 F75 Passage/Closet LatchsetLatch bolt by levers at all times.

T291 Privacy Hospital LockLatch bolt by levers. Outside lever locked by push button in inside lever. Rotating inside lever, closing door, or turning emergency release turn button on outside, release push button. Inside is always free for egress.

T301 F76 Privacy LockLatch bolt by levers. Outside lever lockedby push button in inside lever. Rotatinginside lever or closing door releases pushbutton. Emergency release in outsidelever unlocks door.

T351 Closet LockDeadlocking latch bolt by turn knobinside or lever outside except whenoutside lever is locked by key.

T381 F88 Classroom Security LockLatchbolt operated by lever from eitherside except when key from inside leverlocks outside lever. When outside lever islocked, latchbolt retracted by key inoutside lever or by turning inside lever.

T411 F87 Asylum Lock*Deadlocking latch bolt operated by keyin lever from either side. Both leversalways inoperable.

T501 F82 Entry LockPush button locking. Button on insidelocks outside lever until unlocked by keyor by rotating inside lever. Inside leveralways free. Deadlocking latch bolt.

T511 F109 Entry/Office LockTurn/push button locking. Pushing andturning button locks outside leverrequiring use of key until button ismanually unlocked. Push button locking.Pushing button locks outside lever untilunlocked by key or by rotating insidelever. Inside lever always free.Deadlocking latch bolt.

T521 F81 Office LockTurn button locking. Turning buttonlocks outside lever requiring use of keyuntil button is manually unlocked. Insidelever always free. Deadlocking latch bolt.

T561 F84 Classroom LockDeadlocking latch bolt by levers. Outsidelever is locked by key in outside lever.Inside lever is always free.

T571 F90 Dormitory LockDeadlocking latch bolt by levers exceptwhen locked by push button in insidelever. Key in outside lever locks orunlocks outside lever and releases button.Closing door releases push button. Insidelever always free.

T581 F86 Storeroom LockDeadlocking latch bolt by lever inside orkey outside. Outside lever is inoperable.Inside lever always free.

T851 Storeroom (Electrified – Fail Safe)Latch bolt operated by lever from eitherside except when outer lever iselectrically locked. When outer lever islocked (inoperable), latch bolt retractedby key in cylinder outside. 24 volt DC.185 Amps, continuous duty.

T881 Storeroom (Electrified – FailSecure)Deadlocking latch bolt operated by leverinside at all times. Outside leverinoperable until electrically unlocked,then latch bolt from either side. Whenoutside lever is inoperable latch boltretracted by key in cylinder outside. 24volt DC .185 Amps, continuous duty.

T12 Dummy TrimSingle Trim-surface mounted rigid lever.


Key-In-Lever Locks

FALCON ANSI

Key-In-Lever Locks

FALCON ANSI


T-Series • Functions

T-2

* Caution: Double cylinder locks on residences and any door, in any structure, which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.


Grade 1 Extra Heavy Duty Cylindrical LocksetsANSI-A156.2, SERIES 4000, GRADE 1 Complete Locks • T-Series

T-3

A (Avalon) D (Dane) Q (Quantum)


A D Q605 606


Single Cylinder FunctionsT351PD Closet T501PD EntryT511PD Entry/OfficeT521PD OfficeT561PD Classroom $363.00 $375.00T571PD DormitoryT581PD StoreroomT851PD Elec. Storeroom – Fail Safe $664.00 $676.00T881PD Elec. Storeroom – Fail SecureDouble Cylinder FunctionsT381PD Exit Security $426.00 $438.00T411PD* Asylum


Non-Keyed FunctionsT101S Passage $261.00 $273.00T291S Hospital/Grade School Privacy 327.00 339.00T301S PrivacyDummy TrimT12 Half Dummy $125.00 131.00

T Series • Complete Cylinders Cylinder Mechanism Part Number Price Each

5 pin cylinder T series (except 381 IS, 571) A23151-055 pin cylinder T series 381 IS A23151-065 pin cylinder T series 571 A23151-07

$43.006 pin cylinder T series (except 381 IS, 571) A23161-056 pin cylinder T series 381 IS A23161-066 pin cylinder T series 571 A23161-077 pin cylinder T series (except 381 IS, 571) A23171-057 pin cylinder T series 381 IS A23171-06 53.007 pin cylinder T series 571 A23171-07


Price (per core)

5 pinned cylinder P Suffix STDExample: T581P

6 pinned cylinder P6 Suffix N/CExample: T581P6

7 pinned cylinder P7 Suffix $11.50Example: T581P7

6 pinned Competitor keyway cylinders* P6 Suffix Example: T581P6 (0 Bitted, KD, KA4 only) N/C

Schlage C (6 pin only) CP6 Suffix Example: T581CP6 (All other keying, not listed above)

Note: 1) Finishes: 606 and 626 only2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections see Cyl-3 for charge. See Restricted Keyway Policy (p.8) for standard keyways andpolicy on use of restricted keyway cylinders. Contact 877-671-7011 for availability.

Small Format Interchangeable Core and Small Format Construction Core Description Specify Add to Lock

Price (per core)

Small format core * G SuffixExample: T581GD6 $41.00

Small format core (Best Style) * BB SuffixExample: T581BB6

Small format construction core ** H Suffix 29.50Example: T581HD6

Less Small format core B SuffixExample: T581BD

Less Full Size core J Suffix N/C

Example: T581JD SCH x DANSmall format disposable core BDC Suffix

3.60Example: T581BDC


T-Series • Cylinder Options

T-4






Cylinder Parts • T Series

T-5

Tailpieces for Conventional CylindersCylinder Std. Functions T381 Inside T571 Price

Falcon 6-pin* (10/pack) A30730-001-00 A30730-003-00 A30730-002-00 $16.50 pkg of 10Falcon 7-pin (10/pack) A30730-002-00 A30730-004-00 A30730-006-00 $16.50 pkg of 10Sargent 6 & 10 Line 030997-001-30 030997-003-30 030997-005-30 $8.60 eachYale 1801, 5801 030917-001-30 030917-003-30 030917-005-30 $24.50 eachCorbin Russwin 030994-001-30 030994-003-30 030994-005-30 46.10

IC Throw Members (Tailpieces)Cylinders Std. Functions T381 Inside T571 Price

Falcon 6-pin* 030739-000-30 030739-002-30 030739-000-30 $1.70Falcon 7-pin* 030739-001-30 030739-003-30 030739-001-30 1.70Corbin Russwin 8000 and Sargent 6300 031468-000-30 031468-002-30 031468-004-30 5.30Corbin Russwin 8000-7 (7-pin) 031468-001-00 031468-003-30 031468-005-30 5.30Medeco 32 Series & ASSA A30988-000-00 A30988-002-00 A30988-004-00 4.40Schlage Full Size, Including Primus 031467-000-30 031467-002-30 031467-004-30 10.70Yale and Medeco 31 Series, 6-pin 030917-001-30 030917-003-30 030917-005-30 25.10

* Assa 65611 and 65661, Corbin Russwin 2000-034 and Schlage, including Primus, all use the Falcon 6-pin tailpiece.

* Arrow, Best, InstaKey, Kaba Peaks, Keymark, KSP and Schlage small format cores all use the Falcon configuration.


T-Series • Order Detail

T-6

Specify cylinder requirements. (Note: Locks furnished with Falcon’s standard “G” keyway cylinder or prepared for Falcon interchangeable core unless otherwise specified.)

With Cylinder

Falcon IC

❏ 6-pin❏ 7-pin

Falcon Standard



Competitors’ Keyways - 6-pin Standard Cylinder*

❏ Corbin - 60, 0 Bitted, KD❏ Russwin - D1, 0 Bitted, KD❏ Sargent - LA, 0 Bitted, KD (Also accepts LB, LC keys)❏ Schlage - C, 0 Bitted, KD, KA4❏ Schlage - E, 0 Bitted❏Yale - 8 (Para), 0 Bitted, KD

Less Cylinder - Prepared to Accept**

❏ Falcon IC

Falcon Standard

❏ 6-pin❏ 7-pin

Unit / Mono Lock Cylinders

❏ Falcon Standard (R Series old small plug) 6-pin❏ Corbin Russwin Unit Lock (2000-052) - Master Ring not available

❏ Medeco Unit Lock Retrofit Cylinder(20W5005) - Corbin Russwin Unit Lock

❏ Medeco Unit Lock Retrofit Cylinder(20W0500) - Yale 6200 Mono Lock

❏Yale Mono Lock (1801) and later models

Competitors’ Standard Cylinders

❏ Assa (65611 or 65661) 6-pin❏ Corbin Russwin (2000-034 / CL3400) 6-pin-Master Ring not available

❏ Medeco (20W200V3) 6-pin- tailpiece supplied by Medeco - Falcon / Schlage style

❏ Peaks (Kaba) 6-pin❏ Primus (Schlage) 6-pin❏ Sargent (6, 7 & 10 Line) 6-pin - Keso not available❏ Schlage 6-pin❏Yale (1801) 6-pin - Bicentric not available

Competitors’ IC❏ Arrow 6, 7-pin❏ Assa (70600IC & V70600IC) 6-pin❏ Best 6, 7-pin❏ Corbin Russwin (8000) 6-pin❏ Corbin Russwin (8000-7) 7-pin❏ InstaKey❏ Medeco 31 Series 6-pin❏ Medeco 32 Series 6-pin❏ Medeco Keymark 6, 7-pin❏ Peaks (Kaba) 6, 7-pin❏ Primus (Schlage) 6-pin❏ Sargent (6300) 6-pin❏ Schlage 6-pin❏Yale (1210) 6-pin

* Generic replacement cylinders with competitors’ keyways. ** Proper tailpiece supplied unless otherwise noted.


Competitors’ I-Cores & Competitors’ Standard Cylinder • T Series

T-7

Compatibility with Competitors’ I-Cores

Falcon’s standard interchangeable core option. Specify 6 or 7-pin.Locksets with this option also accept Schlage SFIC, Arrow (in clud ing FlexCore), Best (including PKS & Peaks), InstaKey, Kaba Peaks, Keymark andKSP cores.

The following larger format interchangeable cores will work with the T Series locksets when lockset is so specified:

Assaold and new styleSpecify IC-AS

Corbin Russwin8000 or 8000-7Specify IC-CR6or IC-CR7

Medeco32 Series 6-pinSpecify IC-ME

Medeco 3131 Series 6-pinSpecify IC-YA6

Sargent6300

Specify IC-SA

Schlage 6-pinincluding PrimusSpecify IC-SC

Yale 6-pinMedeco 31 SeriesSpecify IC-YA6

Falcon

Assa CorbinRusswin

Medeco32

Medeco31

Sargent6300

Schlage Yale

Compatibility with Competitors’ Standard CylindersThe T Series is furnished with Falcon’s standard “G” keyway cylinder unless otherwise specified, and accepts the followingcompetitors’ standard 6-pin cylinders.

❏ Assa (65611 or 65661) 6-pin

❏ Corbin Russwin (2000-034 / CL3400) 6-pin - Master Ring not available

❏ Medeco (20W200V3) 6-pin - tailpiece supplied by Medeco- Falcon / Schlage style

❏ Peaks (Kaba) 6-pin

❏ Primus (Schlage) 6-pin

❏ Sargent (6, 7 & 10 Line) 6-pin - Keso not available

❏ Schlage 6-pin

❏ Yale (1801) 6-pin - Bicentric not available


T-Series • Special Options

T-8


Lock Price

Less each lever LLL Example: T581PD LLL/DAN $21.10

Less standard cylinder L suffixExample: T581LD DAN 43.00

Less latch LLL Example: T581PD DAN 626 LLL/5164 32.90

Less strike LLL Example: T581PD DAN 626 98535 LLL 7.80

Non-Standard Door ThicknessDescription Specify Add to

Lock Price

Door thickness 1-3/8" to 1-3/4" A30775-000-00 for thin door shims $11.00

Note: 1) T Series lockset will accommodate up to a 2-1/8" thick door prep standard.

Tactile Warning (Abrasive coat)Description Specify Add to

Lock Price

Abrasive Strip* Preface the design code with 6Example: 6DA for DAN $51.50

Note: 2) Outside lever only is coated unless otherwise specified.

* Not available in 613.

Lead LiningDescription Specify Add to

Lock Price

Lead lining Preface the design code with 9Example: 9DA for DAN $235.00


Latches and Strikes • T Series

T-9

Latches with LocksFinishes: 606, 613, 630

Backset Description Specify List PriceSquare corner, 1-1/8" x 2-1/4", std. 98535

2-3/4" 9/16" radius corner, 1-1/8" x 2-1/4" 98538 N/CSquare corner, 1" x 2-1/4" 923301/4" Radius round corner, 1" x 2-1/4" 92331

2-3/8"* Square corner, 1" x 2-1/4" 92320 11.30

1/4" Radius round corner, 1" x 2-1/4" 923215" Backset Link for 2-3/4" Backset Latch A22161-005-00 36.00


BacksetLatch Face 2-3/8" 2-3/4" List Price1" Deadlatch A92320-00D A92330-00D1" Spring Latch A92320-000 A92330-0001" Spring Latch – 1/4" Radius A92321-000 A92331-000 $48.801" Deadlatch – 1/4" Radius A92321-00D A92331-00D1-1/8" Spring Latch A98535-0001-1/8" Deadlatch A98535-00D1-1/8" Spring Latch – 9/16" Radius - A98538-0001-1/8" Deadlatch – 9/16" Radius A98538-00D5" Backset Link for 2-3/4" Backset Latch A22161-005-00 32.90

Strikes sold separateDescription Lip Length Specify List Price

Square Corner, T-strike, 1-1/8" x 2-3/4" 1-1/8" A05185-000 $3.20 1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1” Q001-048 3.50Square corner, full lip 1-5/8" x 2-1/4" Q001-049ANSI, 1-1/4" x 4-7/8" standard 1-5/16" 005164-000 11.40 ANSI dust box 1" deep, steel - 005099-000-30 2.60 ANSI 1-1/4” x 4-7/8” 7/8” 005161-000 17.00Radius T Strike, 1-1/8” x 2-3/4” 9/16” A05185-004 3.50



ANSI, 1-1/4" x 4-7/8" standard 1-5/16” 5164 N/CSquare corner, full lip 1-5/8" x 2-1/4" 1” 01-049 N/C1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1” 01-048 N/CSquare Corner, T-strike, 1-1/8" x 2-3/4" 1-5/16” 5185 N/CANSI dust box 1" deep, steel - 005099-000-30 N/CANSI 1-1/4” x 4-7/8” 7/8” 5161 N/C

Radius T Strike, 1-1/8” x 2-3/4” 9/16” 5185-4 N/C



T-Series • Levers and Parts

T-10

Levers, Conventional CylinderPart Number Description List Price030740-000 Avalon lever, closed030740-001 Avalon lever, open030742-000 Dane lever, closed030742-001 Dane lever, open $40.50

030744-000 Quantum lever, closed030744-001 Quantum lever, open030929-001 Lever, Avalon open (Corbin Russwin, Medeco, Yale unit)030929-002 Lever, Dane open (Corbin Russwin, Medeco, Yale unit) 48.10030929-003 Lever, Quantum open (Corbin Russwin, Medeco, Yale unit)030996-001 Lever, Avalon open (Sargent 6, 7 & 10 line, Yale)030996-002 Lever, Dane open (Sargent 6, 7 & 10 line, Yale) 54.10030996-003 Lever, Quantum open (Sargent 6, 7 & 10 line, Yale)A30753-00* Inside lever w/set screw, closedA30753-01* Inside lever w/set screw, open 33.10

A31544-00* Inside lever w/set screw, closed 851/881 82.70* Lever design must be specified. D (Dane) Q (Quantum) A (Avalon)

Levers, Small and Large Format Interchangeable CorePart Number Description List Price030740-002 Lever, Avalon SFIC030742-002 Lever, Dane SFIC $40.50030744-002 Lever, Quantum SFIC030926-001 Lever, Avalon IC, ASSA, Medeco, Yale030926-002 Lever, Dane IC, ASSA, Medeco, Yale 86.60030926-003 Lever, Quantum IC, ASSA, Medeco, Yale030927-001 Lever, Avalon IC, Schlage030927-002 Lever, Dane IC, Schlage 87.10030927-003 Lever, Quantum IC, Schlage030928-001 Lever, Avalon IC, Corbin Russwin030928-002 Lever, Dane IC, Corbin Russwin 84.00030928-003 Lever, Quantum IC, Corbin Russwin030930-001 Lever, Avalon IC, Sargent030930-002 Lever, Dane IC, Sargent 90.00030930-003 Lever, Quantum IC, Sargent

RosesPart Number Description List price

626 605 606 613

030706-002 Rose cover $19.50 $22.50

Note: 1) When ordering levers or roses, specify finish.


Levers and Parts • T-Series

T-11

Miscellaneous PartsPart Number Description List Price022104-000-30 Short Slide Catch $ 0.74022105-000-30 Slide Catch 2.00022106-002-55 Retractor 2.60022108-000-60 Retractor Spring 4.90022112-000-30 Retainer, Retractor Spring 1.40022986-001-50 Retractor Insert 0.52030703-000-30 Inner Spindle, Passage and Button Functions 21.50030704-002-30 Lever Stop Plate 3.10030709-000-60 Clutch Spring 0.32030712-000-30 Mounting Plate, Inner 3.00030712-001-30 Mounting Plate, Outer 2.80030718-000-30 Key Spindle, std 3.90030718-001-30 Key Spindle, IC 3.90030722-000-30 Dogging Bar 2.50030724-000-30 Lever Retaining Ring 0.52030726-000-30 Flanged Nut 6.00030726-007-30 Flanged Nut, Inner Electrified 9.20

030728-000 Push Button Cap 2.80030733-000-55 Spindle Inner 2.80

M204-198 Drill guide for locating 5/16" thru-bolt holes 8.60031416-000-70 Solenoid, Fail Safe T851 312.00031516-000-70 Solenoid, Fail secure T881 312.00031511-000-30 Hex Nut, 1/-28 Special 6.60031514-000-30 Solenoid Mount 8.50031519-000-30 Inner Spindle, T851/881 33.80

1387 Hex Key – 1/8" with Looped Handle 12.701388 Hex Wrench 29.40

A30746-000-00 Hub & Housing Assembly 12.50A30747-000-00 Hub & Plate Assembly 11.50A30749-060-00 Insert & Spindle Assembly, Outer, 6 Pin 82.00A30749-070-00 Insert & Spindle Assembly, Outer, 7 Pin 82.00A30905-001-00 Spindle & Driver Assembly, ICA30905-060-00 Spindle & Driver Assembly, 6 Pin 46.00A30906-070-00 Spindle & Driver Assembly, 7 PinA30913-000-00 Key Spindle Assembly, Inner Std.A30913-001-00 Key Spindle Assembly, Inner IC 139.00

Q330-270 T Lock Spring Cage Kit (Inside for T411 and outside for all functions except T101, T291, T411)Q330-271 T Lock Spring Cage Kit (Inside- all functions except T411 and outside for T101, T291, T301) 26.20


T-Series • Chassis and Parts

T-12

ScrewsPart Number Description Finishes Size List Price021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo $ 0.42024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4"combo 0.22

030755-005-30 Type D screw - 8-32 x 5/16" 0.32030831-004-30 Set screw for standard lever - 1/4 x 20 x 1/4" 0.46031515-004-30 Fillister Head Screw - 4-40 x 1/4" 1.70031531-006-30 Set Screw for electrified screw - 1/4-20 x 3/8" 0.40031533-006-30 Self Tap Screw - 8-32 x 3/8" 0.34002770-016-30 Mounting Screws - 10-32x1” 0.38

Chassis AssembliesPart Number

ConventionalCylinder

IC Core Description List Price

A30761-000-00 T101 Chassis $69.50A30765-000-00 T301 Chassis, T291 ChassisA30758-000-00 A30758-001-00 T351/561 ChassisA30769-000-00 A30769-001-00 T411 ChassisA30773-000-00 A30773-001-00 T501 Chassis 121.00A30756-000-00 A30756-001-00 T511 ChassisA30748-000-00 A30748-001-00 T521 ChassisA30760-000-00 A30760-001-00 T581 ChassisA30767-000-00 A30767-001-00 T381 ChassisA30759-000-00 A30759-001-00 T571 Chassis 227.00

A31517-000-00 A31517-001-00 T851 ChassisA31518-000-00 A31518-001-00 T881 Chassis 648.00

Table of Contents

Function Charts W-2

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-2

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-3

Complete Lock Pricing W-4

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-4

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-5

Options W-6

Conventional Cylinder Options . . . . . . . . . . .W-6

Complete Conventional Cylinders . . . . . . . . .W-6

Interchangeable Core & Const. Core . . . . . .W-6

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-7

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-7

Locks Less Components . . . . . . . . . . . . . . . .W-8

Tactile Warning Strip . . . . . . . . . . . . . . . . . .W-8

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-8

Miscellaneous Parts . . . . . . . . . . . . . . . . . . .W-8
















W 501 P D






Schlage CFunction

See W-2

Lock Series



W-1

Introduction W-Series

Price Book 108AEffective July 18, 2011 • Rev. 7/11W-2

W-Series • Lever Functions

W101 F75 Passage LatchsetLatch bolt by levers at all times.

W161 Communicating/Exit LatchDeadlocking latch bolt by inside lever. Non-removable blank plate outside. Inside lever is always free.

W201 F77 Patio LockDeadlocking latch bolt by levers. Outsidelever is locked by push button frominside. Rotating inside lever or closingdoor releases button and unlocks outsidelever.

W301 F76 Privacy LockLatch bolt by levers. Outside lever islocked by push button in inside lever.Rotating inside lever or closing doorrelease push button and frees outsidelever. Inside lever is always free.Emergency release in outside leverunlocks door.

W501 F90 Entry LockPush button locking. Button on inside locks outside lever until unlocked by key or by rotating inside lever. Closing door release push button and unlocks door. Inside lever always free. Deadlock latchbolt.

W511 F109 Entry/Office LockDeadlocking latch bolt by levers. Turn/push button locking. Pushing and turning button locks outside lever, requiring use of a key for unlocking the door until button is manually unlocked. Pushing button locks outside lever until unlocked by key or by rotating inside lever. Inside lever is always free.

W561 F84 Classroom LockDeadlocking latch bolt by levers. Outside lever is locked by key in outside lever. Inside lever is always free.

W581 F86 Storeroom LockDeadlocking latch bolt by lever inside or key outside. Outside lever is always locked. Inside lever is always free.

W711 Apartment Entrance LockDeadlocking latch bolt by levers. Turn/push button locking. Pushing and turning button locks outside lever, requiring use of a key for unlocking the door until button is manually unlocked. Pushing button locks outside lever until unlocked by key, by rotating inside lever, or by closing door. Inside lever is always free.

W12 Dummy TrimSingle Trim-surface mounted rigid lever.


Key-In-Lever Locks

FALCON ANSI FUNCTION

Key-In-Lever Locks

FALCON ANSI & FUNCTION


W-3

Knob Functions • W-Series

W101 F75 Passage LatchsetLatch bolt by knob at all times.

W301 F76 Privacy LockLatch bolt by knobs. Outside knob islocked by push button in inside lever.Rotating inside knob or closing doorrelease push button and frees outsideknob. Inside knob is always free.Emergency release in outside knobunlocks door.

W501 F90 Entry LockPush button locking. Button on inside locks outside knob until unlocked by key or by rotating inside knob. Closing door release push button and unlocks door. Inside knob always free. Deadlocking latchbolt.

W511 F109 Entry/Office LockDeadlocking latch bolt by knobs. Turn/push button locking. Pushing and turning button locks outside knob, requiring use of a key for unlocking the door until button is manually unlocked. Pushing button locks outside knob untilunlocked by key or by rotating inside lever. Inside knob is always free.

W561 F84 Classroom LockDeadlocking latch bolt by knobs. Outside knob is locked by key in outside knob. Inside knob is always free.

W581 F86 Storeroom LockDeadlocking latch bolt by knob inside or key outside. Outside knob is always locked. Inside knob is always free.

W711 Apartment Entrance LockDeadlocking latch bolt by knobs. Turn/push button locking. Pushing and turning button locks outside knob, requiring use of a key for unlocking the door until button is manually unlocked. Pushing button locks outside knob until unlocked by key, by rotating inside knob, or by closing door. Inside knob is always free.

W12 Dummy TrimSingle Trim-surface mounted rigid knob.


Key-In-Knob Locks

FALCON ANSI FUNCTION

Key-In-Knob Locks

FALCON ANSI & FUNCTION


W-Series • Levers Complete Locks Grade 2 Medium Duty Cylindrical LocksetsANSI-A156.2, SERIES 4000, Grade 2



D Q D Q605 606

Function Description 626 613 625Single Cylinder Functions

W501PD EntryW511PD Entry/OfficeW561PD Classroom $112.00 $124.00W581PD StoreroomW711PD Apartment EntryNon-Keyed FunctionsW101S Passage $102.00 $114.00W161D Communicating/ExitW201D Patio 104.00 116.00W301S PrivacyDummy TrimW12 Half Dummy $60.00 $66.00


W-5

Knobs Complete Locks • W-Series

ELI (Elite) HAN (Hana)

Key-In-KnobDesigns and Finishes

E H


Single Cylinder FunctionsW511PD Entry/OfficeW561PD Classroom W581PD Storeroom $66.00 $78.00W711PD Apartment EntryNon-Keyed FunctionsW101S Passage $53.00 $65.00W301S Privacy 55.00 67.00Dummy TrimW12 Half Dummy $41.00 $47.00


W-Series Levers • Cylinder Options




STDExample: W581P6 pinned cylinder P6 Suffix

N/CExample: W581P66 pinned Competitor keyway cylinders* P6 Suffix $6.10

Example: W581P6 (0 Bitted, KD, KA4 only)Schlage C (6 pin only) CP6 Suffix N/C

Example: W581CP6 (All other keying, not listed above)

W-Series Complete Conventional Cylinders

Cylinder MechanismPart Number Price

For All Other Functions For W561 Each6 Pin Falcon keyway cylinder Q330-154 Q330-1556 Pin Schlage C keyway cylinder Q330-152 Q330-153 $43.00

For other cylinders, see pages CYL-4 - CYL-6. —

* Competitor keyways are furnished 0 bitted. Not available Master keyed, except Schlage C

Notes: 5) Finishes for Falcon keyway cylinders are 606 and 626 only.6) Falcon cylinders are furnished G keyway unless otherwise specified.7) Restricted sections see CYL-3. See Restricted Keyway Policy for standard keyway

and policy on use of restricted keyway cylinders. Contact 877-671-7011 for availability.






(per core)

Small format core * G SuffixExample: W581GD6 $41.00

Small format core (Best Style) * BB SuffixExample: W581BB6

Small format construction core ** H Suffix 29.50Example: W581HD6

Less Small format core B Suffix N/CExample: W581BD

Small format disposable core BDC Suffix3.60Example: W581BDC


W-7

Latch & Strike Options • W-Series

Latches with LocksSpecify

Deadlatch RestoringSpringlatch 161, 501, 511, Deadlatch

Backset Description 101, 301 561, 581 201, 501, 511, 711 Add to Lock Price

Square corner, 1-1/8" x 2-1/4" 30-209 30-203 30-2002-3/8"* Square corner, 1" x 2-1/4" 30-207 30-201 30-198

Radius corner, 1" x 2-1/4" 30-208 30-202 30-199 N/CSquare corner, 1-1/8" x 2-1/4" 30-206 30-197 30-194

2-3/4" Square corner, 1" x 2-1/4" 30-204 30-195 30-192Radius corner, 1" x 2-1/4" 30-205 30-196 30-193


ANSI, 1-1/4" x 4-7/8" standard 1-3/8" 30-148Square Corner, T-Strike 1-1/8" x 2-3/4" 1-3/8" 30-149 N/CRadius Corner, Full Lip Strike 1-5/8" x 2-1/4" 1" 30-150Square Corner, Full Lip Strike 1-5/8" x 2-1/4" 1" 30-151

Strikes as Parts Finishes: 605, 606, 613, 630


ANSI, 1-1/4" x 4-7/8" standard 1-3/8" Q330-148 Square Corner, T-strike, 1-1/8" x 2-3/4" 1-3/8" Q330-149 $8.80Radius Corner, Full Lip Strike 1-5/8" x 2-1/4" 1” Q330-150 Square Corner, Full Lip Strike 1-5/8" x 2-1/4" 1” Q330-151


Latches as Parts Finishes: 605, 606, 613, 630Specify

Deadlatch RestoringSpringlatch 161, 511, Deadlatch

Backset Description 101, 103 561, 581 201, 501, 711 Add to Lock Price

Square corner, 1-1/8" x 2-1/4" Q330-209 Q330-203 Q330-2002-3/8" Square corner, 1" x 2-1/4" Q330-207 Q330-201 Q330-198

Radius corner, 1" x 2-1/4" Q330-208 Q330-202 Q330-199 $8.80Square corner, 1-1/8" x 2-1/4" Q330-206 Q330-197 Q330-194

2-3/4" Square corner, 1" x 2-1/4" Q330-204 Q330-195 Q330-192Radius corner, 1" x 2-1/4" Q330-205 Q330-196 Q330-193


Note: 1) Specify finished when ordering.


W-Series • Misc. Parts & Options



Less standard (conventional) cylinder L SuffixExample: W581LD DAN $6.10

Less latch LLL SuffixExample: W581PD6 DAN 626 LLL 30-148 6.10

Less strike LLL SuffixExample: W581GD7 DAN 626 30-206 LLL 6.10

Tactile Warning (abrasive strip)Description Specify List Price

Abrasive Strip Preface the design code with 6 $51.00Example: W581PD6 6DA (for Dane)

Notes: 1) Outside lever only has abrasive strip application, unless otherwise specified.2) Abrasive strip not available in 613 finish.

ScrewsPart Number Description Finishes List Price

Q330-170 Screw Pack 605, 606, 613, 630 $4.80Q330-182 Screw Pack — Dummy Trim – 3.50


Q330-168 SFIC Tailpiece (throw member for levers) Q330-164 Conventional Cylinder tailpiece for entrance and storeroom functions $0.52Q330-165 Conventional Cylinder tailpiece for classroom functions Q330-169 SFIC Tailpiece (throw member for knobs)Q330-282 Inside Spring Cage Kit 7.20


X-Series

X-1

Introduction

Table of Contents

Function Chart X-2

Complete Lock Pricing X-3

Options & Parts X-4

Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-6

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-6

Misc. Parts . . . . . . . . . . . . . . . . . . . . . . . . . . .X-6

Locks Less Components . . . . . . . . . . . . . . . .X-7

Tactile Warning . . . . . . . . . . . . . . . . . . . . . . . .X-7

Stainless Steel/Corros. Resist. Chassis . . . . .X-7

Non-Standard Door Thickness . . . . . . . . . . . .X-7















Backset 2-3/4"


X 501 P D







Schlage CFunction

See X-2

Lock Series


X101 F75 Passage/Closet LatchsetLatch bolt by knobs at all times.

X301 F76 Privacy LockLatch bolt by knobs. Outside locked bypush button in inside knob. Rotatinginside knob or closing door releases pushbutton. Emergency release in outsideknob. Emergency Release Tool M504-271.

X411 F87 Asylum Lock*Deadlocking latch bolt by key fromeither side. Both knobs rigid.

X501 F82 Entry LockPush button locking. Button on insidelocks outside knob until unlocked by keyor by rotating inside knob.

X511 F109 Entry/Office LockTurn/push button locking. Pushing andturning button locks outside knobrequiring use of key until button ismanually unlocked. Push button locking.Pushing button locks outside knob untilunlocked by key or by turning insideknob.

X521 F81 Office LockTurn button locking. Turning buttonlocks outside knob requiring use of keyuntil button is manually unlocked. Insideknob always free.

X561 F84 Classroom LockDeadlocking latch bolt by knobs. Outsideknob is locked by key in outside knob.Inside knob is always free.

X571 F90 Dormitory LockDeadlocking latch bolt by knobs exceptwhen locked by push button in insideknob. Key in outside knob locks orunlocks outside knob and releases button.Closing door releases push button. Insideknob always free.

X581 F86 Storeroom LockDeadlocking latch bolt by inside knob orkey outside. Outside knob rigid.

X12 Single Dummy TrimSingle Trim–Surface mounted.


Key-In-Knob Locks

FALCON ANSI

Key-In-Knob Locks

FALCON ANSI


X-Series • Functions

X-2



Key-In-Knob • X -Series

X-3

Grade 1 Heavy Duty Cylindrical LocksetsANSI-A156.2, SERIES 4000, GRADE 1

EG (Elite-Gala) HG (Hana-Gala)** TG (Troy-Gala)

EY (Elite-York) HY (Hana-York)** TY (Troy-York)

** Hana Knob not available in IC

Key-In-KnobDesigns and Finishes

EG EY HG HY TG TY TG TY

Function Description 626 605 606 613 625 630

Single Cylinder FunctionsX501PD EntryX511PD Entry/OfficeX521PD Entry/Office $386.00 $398.00 $398.00X561PD ClassroomX571PD DormitoryX581PD StoreroomDouble Cylinder FunctionsX411PD * Asylum $449.00 $461.00 $461.00

*CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

Non-Keyed FunctionsX101S Passage $276.00 $288.00 $288.00X301S Privacy 343.00 355.00 355.00X12 Single Dummy Trim 123.00 135.00 135.00


X-Series • Latches and Strikes

X-4

Latches with LocksFinishes: 606, 613, 630

Backset Description Specify Add to Lock PriceSquare corner, 1 1/8" x 2-1/4", std. 985359/16" radius corner, 1-1/8" x 2-1/4" 98538 N/C

3/4" proj. square corner, 1-1/8" x 2-1/4" 98835S**2-3/4"9/16" radius x 3/4" proj., 1-1/8" x 2-1/4" 98838S** $123.00

Square corner, 1" x 2 1/4" 92330 11.401/4" Radius round corner, 1" x 2-1/4" 92331

2-3/8"* Square corner, 1" x 2-1/4" 923201/4" Radius round corner, 1" x 2-1/4" 92321 11.40

5" Backset Link for 2-3/4" Backset Latch A22161-005-00 * 36.00


BacksetLatch Face

2-3/8" 2-3/4"List Price

1" Spring Latch A92320-000 A92330-0001" Deadlatch A92320-00D A92330-00D1" Spring Latch – 1/4" Radius A92321-000 A92331-0001" Deadlatch – 1/4" Radius A92321-00D A92331-00D1-1/8" Spring Latch * A98535-000 $48.80

1-1/8" Deadlatch * A98535-00D1-1/8" Spring Latch – 9/16" Radius * - A98538-0001-1/8" Deadlatch – 9/16" Radius * A98538-00D1-1/8" Deadlatch – 3/4" Projection * A98835-0SD1-1/8" Deadlatch – 9/16" Rad. X 3/4" Proj. * A98838-0SD 189.00

5" Backset Link for 2-3/4" Backset Latch A22161-005-00 34.60


ANSI, 1-1/4" x 4-7/8" standard 1-5/16" 5164Square corner, full lip 1-5/8" x 2-1/4" 1" 01-049 N/C1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" 01-048 Square Corner, T-strike, 1-1/8" x 2-3/4" 1-5/16" 5185Vermin proof strike for ships, 9/16" radius 5133-4 $68.302 3/4" high T strike, ANSI A115.3 1 51832 3/4" high T strike, ANSI A115.3 9/16 5185-42 3/4" high T strike, ANSI A115.3 1-9/16 5186 N/C2 3/4" high T strike, ANSI A115.3 1-13/16 51872 3/4" high T strike, ANSI A115.3 2-1/16 51882 3/4" high T strike, ANSI A115.3 2-5/16 5189ANSI dust box 1" deep, steel - 005099-000-30 Dust box, 1/2" deep, use with 2-3/4" strike - 012191-003-70 Dust box, 1/2” deep, stainless steel - 012191-000-60 N/CANSI, 1-1/4" x 4 - 7/8" 7/8" 5161 N/C


Note 1): Stainless steel applications can be substituted for the 2-3/4" backsets. Specify as "S" after part number (ex: 98535S)

*Marine. For non-ferrous mechanism latches, add "0SD" for deadlatch or "00S" for spring latch to latch number. These latchesconform to the standards set forth within ANSI/BHMA 156.2, 156.5 and 156.15 and are suitable for marine applications.

Note 2): Marine Latches $17.10 Add for non-ferrous mechanism latches Add “OSD”, for deadlatch.

* 2-3/8" backset is furnished as a 1" faceplate standard.** Only available as a deadlatch.


Latches and Strikes • X-Series

X-5

Strikes sold separate Finishes: 605, 606, 613, 625, 626, 629, 630

Description Lip Length Specify List PriceANSI, 1-1/4" x 4-7/8" 1-5/16" 005164-000 $11.40 1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" Q001-048Square corner, full lip 1-5/8" x 2-1/4" Q001-049 3.50Square Corner, T-strike, 1-1/8" x 2-3/4" 1-1/8" A05185-000 2 3/4" high T strike, ANSI A115.3 9/16 A05185-0042 3/4" high T strike, ANSI A115.3 1 A05183-000

24.00

A05183-004 40.002 3/4" high T strike, ANSI A115.3 1-9/16A05186-000

2 3/4" high T strike, ANSI A115.3 1-13/16 A05187-000 2 3/4" high T strike, ANSI A115.3 2-1/16 A05188-000 44.802 3/4" high T strike, ANSI A115.3 2-5/16 A05189-000 Vermin proof strike for ships, 9/16" radius A05133-004-630 65.70ANSI dust box 1" deep, steel - 005099-000-30 2.60 ANSI dust box 1" deep, Stainless steel - 005099-000-60 8.30 Dust box, 1/2” deep, stainless steel 012191-000-60 4.90 Dust box, 1/2" deep, use with 2-3/4" strike 012191-003-70 1.80 ANS, 1-1/4" x 4-7/8" 7/8" 005161-000 11.40

X-Series Complete CylindersCylinder Mechanism Part Number Price Each

5 pin cylinder X411, 501, 511, 521, 581 E & T A231525 pin cylinder X411, 501, 511, 521, 581 H A23152-025 pin cylinder X561 – E and T designs A231515 pin cylinder X561 – H designs, 571 – E & T A23151-025 pin cylinder X571 – H designs A23151-036 pin cylinder X411, 501, 511, 521, 581 E & T A23162 $43.00

6 pin cylinder X411, 501, 511, 521, 581 H A23162-026 pin cylinder X561 – E and T designs A231616 pin cylinder X561 – H designs, 571 – E & T A23161-026 pin cylinder X571 – H designs A23161-037 pin cylinder X411, 501, 511, 521, 581 H A23172-027 pin cylinder X561 – H designs A23171-01 53.007 pin cylinder X571 – H designs A23171-02

Small Format Interchangeable CoreSmall Format Construction Core

Description Specify Add to Lock Price(per core)

Small format core * G SuffixExample: X581GD6

Small format core (Best Style) * BB Suffix $41.00

Example: X581BB6Small format construction core ** H Suffix 29.50

Example: X581HD6Less Small format core B Suffix N/C

Example: X581BDSmall format disposable core BDC Suffix 3.60

Example: X581BDC

Conventional Cylinder OptionsDescription Specify Add to Lock Price

(per core)

5 pinned cylinder P Suffix STDExample: X581P

6 pinned cylinder P6 Suffix N/CExample: X581P6

7 pinned cylinder (Hana only) P7 Suffix $11.50Example: X581P7

6 pinned Competitor keyway cylinders* P6 Suffix Example: X581P6 (0 Bitted, KD, KA4 only)

Schlage C (6 pin only) CP6 Suffix N/CExample: X581CP6 (All other keying, not listed above)

* Cylinders are furnished G keyway, keyed differently unless otherwise specified.

Notes: 1) Finishes: 606 and 626 only.2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections see Cyl-3 for charge. See Restricted Keyway Policy (p.8) for standard keyways andpolicy on use of restricted keyway cylinders. Contact 877-671-7011 for availability.




X-Series • Cylinder Options

X-6

Notes: 5) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details


Parts • X-Series

X-7

KnobsList price

Part Number Description 605 606 613

626 625 630022258-007 Knob, Troy – Closed022258-008 Knob, Troy – Emergency $66.60 $69.60 022258-009 Knob, Troy – SFIC022290-007 Knob, Troy – Button/Cylinder022950-007 Knob, Hana – Closed022950-008 Knob, Hana – Emergency 63.40 66.40022953-007 Knob, Hana – Button/Cylinder022980-007 Knob, Elite – Closed022980-008 Knob, Elite – Emergency 57.40 60.40022980-009 Knob, Elite – SFIC022981-007 Knob, Elite – Button/Cylinder

RosesList price

Part Number Description 605 606 613

626 625 630022920-000 Rose, Gala024030-000 Rose, York $23.40 $26.40

Miscellaneous PartsPart Number Description List Price031718-000 Push button cap031719-000 Turn button cap $2.10

031748-000-70 Push button mount 6.00031749-000-70 Turn button mount 11.80

Screw packsPart Number Description Specify Finish Contents List price

A03519-000 Screw pack 605, 613, 626 024416-012 (2 ea) $2.90

ScrewsPart Number Description Finishes Size List Price024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4" combo $ .22021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo .42

Note: 1) Hana and Elite not available in 630


X-Series • Options

X-8



Less each knob LLL for knob designExample: X581PD LLL/EG $9.00

Less standard cylinder L suffixExample: X581LD EG 43.00

Less latch LLL for latchExample: X581PD EG 626 LLL/5164 33.20

Less strike LLL for strikeExample: X581PD EG 626 98535 LLL 7.90

Tactile WarningDescription Specify Add to Lock Price

Abrasive - 6 Prefix (not available in 613) Preface the design code with 6 $47.30Example: 6EG for ELITE GALA

Stainless Steel / Corrosion Resistant ChassisDescription Specify Add to Lock Price

XC – Stainless steel/non-ferrous mechanism Preface the function code with CExample: XC581 PD TG 630 $130.00

Knurled - 8 Prefix (not available in 630) Preface the design code with 8 $86.10 Example: 8EG for ELITE GALA

Non-Standard Door ThicknessDescription Specify Add to Lock Price

Door thickness over 2-1/8" - 2-1/4" Door thickness and how door is extendedExample: 2-1/4", EE $9.70

Notes: 1) Outside lever only is coated unless otherwise specified

Table of Contents

Function Chart Y-2

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-2

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-2

Complete Lock Pricing Y-3

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-3

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-4

Options Y-5

Complete Conventional Cylinders . . . . . . . . .Y-5

Interchangeable Core & Const. Core . . . . . . .Y-5

Conventional Cylinder Options . . . . . . . . . . . .Y-5

Locks Less Components . . . . . . . . . . . . . . . .Y-5

Non-Standard Finishes . . . . . . . . . . . . . . . . . .Y-5

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-6

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-6

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-6

Miscellaneous Parts . . . . . . . . . . . . . . . . . . . .Y-6

Tactile Warning Strip . . . . . . . . . . . . . . . . . . .Y-6









Certification ANSI A156.2, Series 4000, Grade 2, UL Listed for 1-1/2-Hour fire door

Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw

Strike 1-1/8" x 2-3/4", T-Strike, Square corner, no box




Backset 2-3/8" - 2-3/4" universal backset


Y 521 P D






Schlage CFunction

See Y-2

Lock Series



Y-1

Y-SeriesIntroduction

Y101 F75 Passage/Closet LatchsetLatch bolt by levers at all times.

Y161 Communicating/Exit LatchDeadlocking latch bolt by inside lever. Non-removable blank plate outside.

Y301 F76 Privacy LockLatch bolt by lever from either side except when locked by push button inside. Emergency release in outside lever. Manually returning the push button to the unlocked position releases inside and outside.

Y521 F81 Entry/Office LockDeadlocking latch bolt operated by leverexcept when outside lever is locked byturn button inside. Inside lever alwaysfree. When outside lever is locked, latchbolt is operated by key in outside lever orby rotating inside lever. Turn button mustbe manually returned to the unlockedposition to release outside lever. Lockmay be locked or unlocked by key incylinder outside.

Y561 F84 Classroom LockDeadlocking latch bolt operated by lever. Outside lever is locked by key in outside lever. Inside lever is always free.

Y581 F86 Storeroom LockDeadlocking latch bolt operated by inside lever or key outside. Rotating key in outside lever unlocks mechanism allowing lever to retract latch bolt. When key is removed, outer lever becomes rigid.

Y12 Single Dummy TrimSingle Trim-Through bolted from inside.For double trim order two singles anddrill out threads from mounting stud.


Key-In-Lever Locks

FALCON ANSI

Key-In-Knob Locks

FALCON ANSI

Y101 F75 Passage/Closet LatchsetLatch bolt by knobs at all times.

Y161 Communicating/Exit LatchDeadlocking latch bolt by inside knob. Non-removable blank plate outside.

Y301 F76 Privacy LockLatch bolt by knob from either sideexcept when locked by push buttoninside. Emergency release in outsideknob. Manually returning the push buttonto the unlocked position releases insideand outside.

Y521 F81 Entry/Office LockDeadlocking latch bolt operated by knobexcept when outside knob is locked byturn button inside. Inside knob alwaysfree. When outside knob is locked, latchbolt is operated by key in outside knob orby rotating inside knob. Turn button mustbe manually returned to the unlockedposition to release outside knob. Lockmay be locked or unlocked by key incylinder outside.

Y561 F84 Classroom LockDeadlocking latch bolt operated by knob.Outside knob is locked by key in outsideknob. Inside knob is always free.

Y581 F86 Storeroom LockDeadlocking latch bolt operated by insideknob or key outside. Rotating key inoutside knob unlocks mechanismallowing knob to retract latch bolt. Whenkey is removed, outer knob becomesrigid.

Y12 Single Dummy TrimSingle Trim-Through bolted from inside. For double trim order two singles and drill out threads from mounting stud.


Lock Features and SpecificationsY-Series • Functions

Y-2


Grade 2 Standard Duty Tubular LocksetsANSI-A156.2, SERIES 4000, Grade 2 Key-In-Lever • Y-Series

Y-3

Q (Quantum)D (Dane)


D Q605 606


Single Cylinder FunctionsY521PD Entry/OfficeY561PD Classroom $162.00 $174.00Y581PD StoreroomNon-Keyed FunctionsY101S Passage $103.00 $115.00Y161D Communicating/Exit 116.00 128.00Y301S PrivacyDummy TrimY12 Half Dummy $50.00 $56.00

Notes: 1) Quantum is not available as interchangeable core.2) Split designs and/or finishes are priced at the highest design and/or finish price.

H (Hana)E (Elite)

Notes: 1) Replacement parts, other than latches, cylinders and strikes, not available.2) Split designs and/or finishes are priced at the highest design and/or finish price.

* Expediting and order cancellation are not allowed after order is placed.

Y-Series Key-In-KnobDesign and Finishes

E HFunction Description 626 605 606 613 625Single Cylinder Functions

Y521PD Entry/Office Y561PD Classroom $84.00 $96.00Y581PD Storeroom Non-Keyed FunctionsY101D Passage $54.00 $66.00Y161D Exit 69.00 81.00Y301D Privacy 62.00 74.00Dummy TrimY12 Half Dummy $24.00 $30.00


Grade 2 Standard Duty Tubular LocksetsANSI-A156.2, SERIES 4000, Grade 2Y-Series • Key-In-Lever

Y-4


Latches and Strikes • Y-Series

Y-5

Square Corner 1/4" Radius

Latches with LocksBackset Description Specify Add to Lock Price

Square corner, 1-1/8" x 2-1/4", standard 01-0452-3/4" - 2-3/8" Square corner, 1" x 2-1/4" 01-043 N/C

1/4" Radius round corner, 1" x 2-1/4" 01-044


Part Number Description Backset List PriceQ001-043 Square corner, 1" x 2-1/4"Q001-044 1/4" Radius round corner, 1" x 2-1/4" 2-3/8 - 2-3/4” $24.40Q001-045 Square corner, 1-1/8" x 2-1/4"

ScrewsPart Number Description Finishes Size List Price024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4"combo $ 0.22021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo 0.42


Q001-055 IC Tailpiece $2.30



Square Corner, T-strike, 1-1/8" x 2-3/4", standard 1-5/16" 01-046 Square corner, full lip 1-5/8" x 2-1/4" 1" 01-049 N/C1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 01-048 ANSI, 1-1/4" x 4-7/8" 1-5/16" 01-047 $6.80 ANSI dust box 1" deep, steel - 005099-000-30 $2.60

Strikes sold separateFinishes: 605, 613, 626

Description Lip Length Specify List PriceSquare Corner, T-strike, 1-1/8" x 2-3/4" 1-5/16" Q001-046 $3.50 ANSI, 1-1/4" x 4-7/8" 1-5/16" Q001-047 11.40 1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" Q001-048 3.50 Square corner, full lip 1-5/8" x 2-1/4" 1" Q001-049 3.50 ANSI dust box 1" deep, steel - 005099-000-30 2.60


Y-Series • Options & Cylinders

Y-6

Y Series • Complete Cylinders Cylinder Mechanism Part Number Price Each

5 pin cylinder Y series A23155 $43.006 pin cylinder Y series A23165

Notes: 1) Finishes: 606 and 626 only.2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections See CYL-3. See Restricted Keyway Policy (p. 8) for standard keyways and policy on use ofrestricted keyway cylinders. Contact Customer Service for availability.

Small Format Interchangeable Core and Small Format Construction Core Description Specify Add to Lock

Price (per core)Small format core * G Suffix

Example: Y581GD6 $41.00Small format core (Best Style) * BB Suffix

Example: Y581BB6Small format construction core ** H Suffix 29.50

Example: Y581HD6Less Small format core B Suffix N/C

Example: Y581BDSmall format disposable core BDC Suffix 3.60Example: Y581BDC



Price (per core)

5 pinned cylinder P Suffix STDExample: Y581P6 pinned cylinder P6 Suffix

Example: Y581P66 pinned Competitor keyway cylinders* P6 Suffix

Example: Y581P6 (0 Bitted, KD, KA4 only) N/CSchlage C (6 pin only) CP6 Suffix

Example: Y581CP6 (All other keying, not listed above)


Lock Price

Less standard cylinder L suffixExample: Y581LD DAN $15.30

Less latch LLL for latchboltExample: Y581PD 626 LLL 01-046 15.10

Less strike LLL for strikeExample: Y581PD 626 01-045 LLL 2.30





Y-7

Non-Standard Finishes Description Specify Add to

Lock Price

Any split finish option Finish specified O/S x I/SExample: 605 x 626 See Page Y-3, Y-4

Note: 7) 625 and or any split finish is available on a special order basis with extended lead times. Orders cannot be cancelled and product cannot be returned.

Tactile Warning (abrasive strip)Description Specify List Price

Abrasive Strip Preface the design code with 6 $46.20Example: W581PD6 6EL (for ELITE)

Notes: 1) Outside lever only has abrasive strip application, unless otherwise specified.2) Not available in 613 finish.

Notes

Price Book 108AEffective July 18, 2011 • Rev. 7/11Y-8

Y-Series


Introduction Cylinders, Keys and Keying

CYL-1

Finish Codes and Descriptions*Code Description

605 (US 3) Bright Brass-Clear Coated606 (US 4) Satin Brass-Clear Coated613 (US 10B) Satin Bronze-Dark Oxidized and Oil Rubbed626 (US 26D) Satin Chromium629 (US32) Bright Stainless Steel630 (US 32D) Satin Stainless Steel

* See individual products for finish availability.


Standard Cylinder Solid Brass housings and plugs. Standard Keyway is Falcon G keyway. Keyed different furnished unless otherwise specified (additional charges may apply, see CYL-17 for keying charges) with 2 nickel silver keys. Mortise cylinder standard lengths are 1 1/8” for conventional cylinders and 1 3/8” for small format interchangeable core housings.

SFIC Furnished in A keyway unless otherwise specified. Combinated cores are provided with 2 keys.

Restricted Keyways Falcon has a varied selection of restricted keyways for conventional and SFIC cylinders based on geographic restrictions for usage. Minimum cylinder purchase required. See your Security and Safety Consultant for more information or availability.

Table of Contents

Conventional Cylinders . . . . . . . . . . . CYL-2

Interchangeable Cores . . . . . . . . . . . . CYL-7

IC Cylinders and Cabinet Locks . . . . CYL-8

Conventional Keys and Blanks . . . . . CYL-9

IC Keys and Key Blanks, Disposable Construction Core . . . . . CYL-10

Keys & Keying Construction Core Program . . . . . . . . . . . . . . . . . . . CYL-11

Cams, Tailpieces, Throw Members. . CYL-12

Cylinder Parts and Service Equipment . . . . . . . . . . . . . . . CYL-13

IC Cams, Throw Members, etc. . . . . . CYL-14

IC Service Equipment & Supplies. . . CYL-15

Keying and Stamping Charges . . . . . CYL-16

Non-IC Products

*Hotel mortise cylinders are offered as masterkeyed or “O” bitted only and must be specified.

Notes: 1) MA cam provided unless otherwise specified. 2) For 7-pin conventional add $11.503) All mortise cylinders will be furnished with cam 5622-STO, except for MA381 function which will be supplied with 5620-STD and 5621-STD. See CYL-12 for additional available cams.

4) Mortise and rim cylinders are not available in any competitor keyway, except Schlage C.5) 984D, 985D not available in 629 and 630.6) Conventional mortise cylinder with Schlage C keyway are available with 985, 986 and 951.7) Add $9.00 (list) for Falcon restricted keyways. See page iv for standard keyways. All others are restricted. Falcon conventional cylinder restricted keyways use a unique pin kit (P/N 1417) and cutter wheel for keys.

*For 7-pin cylinder add $11.00

Note: 8) Postal regulations prohibit master keying of mail box cylinders.

Miscellaneous CylindersFinishes

605Part Number Description 606, 626 613 629, 630

945 Cam lock $96.00 $97.00 $97.00950* Sliding door cylinder 43.00 - -954* Mail box cylinder 53.20 - -

951 Available in:605 606613 626629 630

945 Available in:605 606613 626629 630

950 Available in:606 626

954 Available in:606 626

985 Available in:605 606613 626629 630

986T Available in:605 606613 626629 630

985D Available in:605 606613 626625


Conventional Cylinders

CYL-2

MA and M Series Conventional Rim and Mortise CylindersPins Length Description Number 626 605 606 613 629 630

5 or 6 1-1/8 985 $55.00 $57.001-1/4 Mortise 9861-3/8 987 55.00 57.001-1/2 Mortise 988 65.00 67.00

5, 6, or 7 1-3/4 990 80.00 82.002 992 83.00 85.00

6 1-1/8 2501-1/4 251

6 1-3/8 Mortise, hotel function* 252 71.00 73.007 1-3/8 253

5, 6, or 7 – Rim 951 55.00 57.00- 1-1/8 985T- 1-1/4

Mortise, thumbturn986T

85.00 87.00

- 1 984D- 1-1/8 Dummy 985D 34.00 36.00


Key-in-Knob / Lever Type CylindersIncluding Padlock and Deadlock Insert Cylinders Conventional Cylinders

CYL-3

Non-IC Products

Note: 1) Finishes: 606 and 626 only2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Add $9.00 (list) for Falcon restricted keyways. See page iv for standard keyways. All others are restricted. Falcon conventional cylinder restricted keyways use a unique pin kit (P/N 1417) and cutter wheel for keys.

Falcon Conventional Cylinders, 7 PinCylinder Mechanism Part Number List Price

7 Pin Cylinder - D111, D141 Q500-0467 Pin Cylinder - D121 Q500-0597 Pin Cylinder - D211, D241 Q500-0147 Pin Cylinder - D221 Q500-0577 pin cylinder RU/T series (except 381 IS, 571) A23171-05 $53.007 pin cylinder RU/T series 381 IS A23171-067 pin cylinder RU/T series 571 A23171-077 pin cylinder X411, 501, 511, 521, 581 H A23172-027 pin cylinder X561 – H designs A23171-017 pin cylinder X571 – H designs A23171-02

Falcon Conventional Cylinders, 5 and 6 PinCylinder Mechanism Part Number List Price

5 Pin Cylinder 955 A23151-015 Pin Cylinder B series except 611 function A23155-025 Pin Cylinder B series 611 function A23151-065 Pin Cylinder - D111, D141 Q500-0645 Pin Cylinder - D121 Q500-0665 Pin Cylinder - D131 Q500-0705 Pin Cylinder - D211, D241 Q500-0675 Pin Cylinder - D221 Q500-0695 Pin Cylinder - D231 Q500-0725 Pin Cylinder H all other functions & designs A300285 Pin cylinder H511 knobs A300405 Pin Cylinder RU/T series (except 381 IS, 571) A23151-065 Pin Cylinder RU/T series 381 IS A23151-055 Pin Cylinder RU/T series 571 A23151-075 Pin Cylinder X411, 501, 511, 521, 581 E & T A231525 Pin Cylinder X411, 501, 511, 521, 581 H A23152-025 Pin Cylinder X561 – E and T designs A231515 Pin Cylinder X561 – H designs, 571 – E & T A23151-025 Pin Cylinder X571 – H designs A23151-035 Pin Cylinder Y series A231556 Pin Cylinder 955 A23161-01 $43.006 Pin Cylinder B series except 611 function A23165-026 Pin Cylinder B series 611 function A23161-066 Pin Cylinder - D111, D141 Q500-0216 Pin Cylinder - D121 Q500-0586 Pin Cylinder - D131 Q500-0546 Pin Cylinder - D211, D241 Q500-0106 Pin Cylinder - D221 Q500-0566 Pin Cylinder - D231 Q500-0126 Pin Cylinder H101 A30028-016 Pin Cylinder H511 knobs A30040-016 Pin Cylinder RU /T series 381 IS A23161-066 Pin Cylinder RU/T series (except 381 IS, 571) A23161-056 Pin Cylinder RU/T series 571 A23161-076 Pin Cylinder X411, 501, 511, 521, 581 E & T A231626 Pin Cylinder X411, 501, 511, 521, 581 H A23162-026 Pin Cylinder X561 – E and T designs A231616 Pin Cylinder X561 – H designs, 571 – E & T A23161-026 Pin Cylinder X571 – H designs A23161-036 Pin Cylinder Y series A231656 Pin Cylinder H451, 461 hotel/motel A30036-01 53.006 Pin Cylinder W lock - except W561 (lever) Q330-1546 Pin Cylinder W561 (lever) Q330-155 43.006 Pin Cylinder W lock - except W561 (knob) Q330-2386 Pin Cylinder W561 (knob) Q330-246

Schlage Conventional Cylinders, 6 PinCylinder

MechanismFunction Keying Offered Part Number List Price

Schlage C kwy KA4, KD, 0-bit A23160-2Schlage E kwy 955 0-bit A23159-2Schlage C kwy KD, 0-bit A23160-13Schlage E kwy B except 611 0-bit A23159-13Schlage C kwy KD, 0-bit A23160-11Schlage E kwy B611, T381 IS 0-bit A23159-11Schlage C kwy KD, 0-bit A23260-3Schlage E kwy D121, 221 0-bit Q033-068Schlage C kwy KD, 0-bit, KA4 Q033-071Schlage E kwy D131, 231 0-bit Q033-067Schlage C kwy KD, 0-bit, KA4 Q033-070Schlage C kwy D141, D241 KA4, KD, 0-bit Q033-069Schlage E kwy 0-bit Q033-066Schlage E kwy H deadbolt 0-bit A23159-10Schlage C kwy KA4, KD, 0-bit A23160-7Schlage E kwy H511 knobs 0-bit A23159-7Schlage C kwy KA4, KD, 0-bit A23160-12Schlage E kwy T571 0-bit A23159-12Schlage C kwy KA4, KD, 0-bit A23160 $45.00Schlage E kwy T Except 571 & 381 IS 0-bit A23159Schlage C kwy KA4, KD, 0-bit A23160-5Schlage E kwy X411, 501, 511, 521, 581 E & T 0-bit A23159-5Schlage C kwy KA4, KD, 0-bit A23160-6Schlage E kwy X411, 501, 511, 521, 581 H 0-bit A23159-6Schlage C kwy KA4, KD, 0-bit A23160-1Schlage E kwy X561 E & T 0-bit A23159-1Schlage C kwy KA4, KD, 0-bit A23160-3Schlage E kwy X571 E & T, X561 H 0-bit A23159-3Schlage C kwy KA4, KD, 0-bit A23160-4Schlage E kwy X571 H 0-bit A23159-4Schlage C kwy KA4, KD, 0-bit A23160-8Schlage E kwy Y series 0-bit A23159-8

W Series, except W561 (Levers) MK, KA4, KD, 0-bit Q330-152Schlage C kwy W561 (Levers) MK, KA4, KD, 0-bit Q330-153

W Series, except W561 (Knobs) MK, KA4, KD, 0-bit Q330-237W561 (Knobs) MK, KA4, KD, 0-bit Q330-245

Notes: 1) Finishes: 606 and 626 only2) Specify keyway, cylinders are furnished 0-bitted unless otherwise specified.Master keying is available on Schlage C Keyway only.


Key-in-Knob / Lever Type CylindersIncluding Padlock and Deadlock Insert CylindersConventional Cylinders

CYL-4


Key-in-Knob / Lever Type CylindersIncluding Padlock and Deadlock Insert Cylinders Conventional Cylinders

CYL-5

Corbin Russwin Conventional Cylinders, 6 PinCylinder


Corbin 60 kwy KD, 0-bit A23167-2Corbin/Russ L4 kwy 955 0-bit A23174-2Russwin D1 kwy KD, 0-bit A23168-2Corbin 60 kwy KD, 0-bit A23167-13Corbin/Russ L4 kwy B Series KA4, 0-bit, KD A23174-13Russwin D1 kwy KD, 0-bit A23168-13Corbin 60 kwy KD, 0-bit A23167-11Corbin/Russ L4 kwy B611, T381 IS series KA4, 0-bit, KD A23174-11Russwin D1 kwy KD, 0-bit A23168-11Russwin D1 kwy D121, 221 KD, 0-bit Q033-074Corbin/Russ L4 kwy 0-bit Q033-079Russwin D1 kwy D131, 231 KD, 0-bit Q033-073Corbin/Russ L4 kwy 0-bit Q033-078Russwin D1 kwy D141, D241 KD, 0-bit Q033-072Corbin 60 kwy KD, 0-bit Q033-077Corbin/Russ L4 kwy 0-bit A23174-7Russwin D1 kwy H deadbolt KD, 0-bit A23167-7Corbin 60 kwy 0-bit A23168-7Corbin/Russ L4 kwy H511 knobs 0-bit A23167-10Russwin D1 kwy KD, 0-bit A23168-10Corbin 60 kwy 0-bit A23167Corbin/Russ L4 kwy T Except 571 & 381 IS KA4, 0-bit A23174Russwin D1 kwy KD, 0-bit A23168Corbin 60 kwy KD, 0-bit A23167-12Corbin/Russ L4 kwy T571 0-bit A23174-12Russwin D1 kwy KD, 0-bit A23168-12Corbin 60 kwy 0-bit A23167-6 $45.00Corbin/Russ L4 kwy X 411, 501, 511, 521, 581 H 0-bit A23174-6Russwin D1 kwy KD, 0-bit A23168-6Corbin 60 kwy 0-bit A23167-5Corbin/Russ L4 kwy X411, 501, 511, 521, 581 E & T 0-bit A23174-5Russwin D1 kwy KD, 0-bit A23168-5Corbin 60 kwy KD, 0-bit A23167-1Corbin/Russ L4 kwy X561 E & T 0-bit A23174-1Russwin D1 kwy KD, 0-bit A23168-1Corbin 60 kwy KD, 0-bit A23167-3Corbin/Russ L4 kwy X571 E & T, X561 H 0-bit A23174-3Russwin D1 kwy KD, 0-bit A23168-3Corbin 60 kwy KD, 0-bit A23167-4Corbin/Russ L4 kwy X571 H 0-bit A23174-4Russwin D1 kwy KD, 0-bit A23168-4Corbin 60 kwy 0-bit A23167-8Corbin/Russ L4 kwy Y Series 0-bit A23174-8Russwin D1 kwy KD, 0-bit A23168-8Corbin 60 kwy 0-bit Q330-166Corbin/Russ L4 kwy W Series, except W561 (Levers) 0-bit , KA4 Q330-158Russwin D1 kwy KD, 0-bit Q330-210Corbin 60 kwy KD, 0-bit Q330-167Corbin/Russ L4 kwy W561 (Levers) 0-bit , KA4 Q330-159Russwin D1 kwy KD, 0-bit Q330-211Corbin 60 kwy KD, 0-bit Q330-241Corbin/Russ L4 kwy W Series, except W561 (Knobs) 0-bit , KA4 Q330-240Russwin D1 kwy KD, 0-bit Q330-242Corbin 60 kwy KD, 0-bit Q330-249Corbin/Russ L4 kwy W561 (Knobs) 0-bit , KA4 Q330-248Russwin D1 kwy KD, 0-bit Q330-250

Notes: 1) Finishes: 606 and 626 only2) Specify keyway, cylinders are furnished 0-bitted unless otherwise specified. Master keying is not available.

Sargent Conventional Cylinders, 6 PinCylinder


955 A23166-2B Series A23166-13B611, T381 IS A23166-11H deadbolt A23166-7H511 Knobs A23166-10T Except 571 & 381 IS A23166

Sargent LA Keyway T571 KD, 0 Bit A23166-12 $45.00 X411, 501, 511, 521, 581 E & T A23166-5X411, 501, 511, 521, 581 H A23166-6X561 E & T A23166-1X571 E & T, X561 H A23166-3X571 H A23166-4Y Series A23166-8W Series, except W561 (Levers) Q330-160W561 (Levers) Q330-161W Series, except W561 (Knobs) Q330-243W561 (Knobs) Q330-251

Yale Conventional Cylinders, 6 PinCylinder


955 A23169-2B except 611 KD, 0-bit A23169-13B611, T381 IS A23169-11D121, D221 KD Q033-076D141, 241, 111, 211 Q033-075H deadbolt A23169-7H511 knobs A23169-10T Except 571 & 381 IS A23169

Yale 8 (Para) Keyway T571 A23169-12 $45.00X411, 501, 511, 521, 581 E & T A23169-5X411, 501, 511, 521, 581 H A23169-6X561 E & T KD, 0-bit A23169-1X571 E & T, X561 H A23169-3X571 H A23169-4Y series A23169-8W Series, except W561 (Levers) Q330-156W561 (Levers) Q330-157W Series, except W561 (Knobs) Q330-239W561 (Knobs) Q330-247

Notes: 1) Finishes: 606 and 626 only2) Specify keyway, cylinders are furnished 0-bitted unless otherwise specified.Master keying is not available.


Key-in-Knob / Lever Type CylindersIncluding Padlock and Deadlock Insert CylindersConventional Cylinders

CYL-6


Interchangeable Cores

CYL-7

Pricing: Uncombinated cores have no pins, springs or keys. Combinated core prices include master keying.

Finishes: 606 and 626 standard.

Packaging: Uncombinated cores are packed 20 per box.

Keyways: The “A” keyway is standard for IC products and will be supplied unless otherwise specified.A, B, C, D, DD, E, F, G, H, J, K, L, M, N, Q, R, TB and TD are equivalent to Best and Arrow IC keyways of thesame letter designations. All other keyways are restricted. Add $9.00 list for all restricted keyways.

When ordering locks or cores master keyed into existing Best, Arrow or other IC systems, a copy of the bitting listfor the existing system is required with the order. Competitors’ bitting lists are safeguarded the same as Falconbitting lists. See CYL-17.

Logo: Cores and keys are supplied with the Falcon logo standard.Combinated cores supplied without logo are furnished with plain (non-embossed) keys.

Notes: 1) For restricted keyways add $9.00 per core. See page iv for restricted keyway policies.For temporary construction cores and policy, see CYL-11.

2) For 605, 613 and 625 add $2.50 per core. Minimum 250 pieces. 3) Keying must be specified on combinated cores.

IC Products

Regular Core (suffix keyway to number)Uncombinated Combinated

Description 6-Pin 7-Pin Price 6-Pin 7-Pin Price

Standard C646 C647 $24.00 C606 C607Best style capping CB846 CB847 CB806 CB807 $41.00No logo C648 C649 $24.00 C608 C609No logo, Best capping CB848 CB849 CB808 CB809

C607 Available in:606 626

All prices are less core. Not available with C997.

IC Products

Available in:605 606613 626629 630

Available in:605 606613 625

626

Available in:605 606613 626629 630

Cabinet Locks and MiscellaneousFinishes

606, 605, 613Cat. No. Description 626 606, 626 605, 626 629, 630

C942 Cabinet lock $73.80 - - $75.90C943 Cam lock 104.00 - - 106.00C945 Cam lock - heavy cam 73.80 - - 73.00C959 Push lock for sliding doors - $102.00 - -C979 Rim cabinet lock - - $62.40 -C982 Mail box lock - 60.30 - 62.40

Note: ) U. S. postal regulations prohibit master keying of mail box locks.


IC Cylinders & Cabinet Locks

CYL-8

MA and M Series Small Format Interchangeable Rim and Mortise Core HousingsCat. Number Length Pins Description 626 605 606 613 629 630

C987 1 3/8" 6 or 7 Mortise $34.30 $36.30C988 1 1/2" 6 or 7 MortiseC990 1 3/4" 6 or 7 Mortise 40.60 42.60 C992 2" 6 or 7 Mortise 42.60 44.60 C977 Fits Adams Rite 6 or 7 Mortise, tapered head 36.40 38.40 C997 1 3/8" 6 or 7 Mortise, unassembled, less cam 27.00 29.00 C262 1 5/8" 6 or 7 Mortise, hotel function RH 57.20 59.20 C265 1 5/8" 6 or 7 Mortise, hotel function LH C953 N/A 6 or 7 Rim 35.40 37.40

Notes: 1) All mortise cylinders will be furnished with cam 5622-STD, except for MA381 function which will be supplied with 5620-STD and 5621-STD. See CYL-12 for additional available cams.

2) C977 is only furnished with 012667-001 Adams Rite Cam

Rim Tapered Head Mortise

C943 C945 C959 C979 C982


Conventional Keys and Blanks

CYL-9

Non-IC Products

Key Blanks(Specify keyway and order in multiples of 50 except where specified)

Part Number Description Qty/Wt. Each

KB573 Standard 5-pin 50/1 $1.60KB577 Standard 6-pinKB581 Standard 7-pin 35/1 1.80KB751 Plain 5-pin (non-embossed) 50/1 1.60KB761 Plain 6-pin (non-embossed)KB771 Plain 7-pin (non-embossed) 35/1 1.80KB544 Large bow - 5-pin 25/1 3.70KB590 Large bow - 6-pin 25/1 4.40KB579 Emergency - 6-pin 50/1 6.20KB592 Emergency, large bow - 6-pin 25/1 7.30001911-001-70 Plastic handicap access bow only 1 4.90KB525 Block-O-Key construction key - 4-pin 1 3.40KB536 Block-O-Key removal tool 1 1.60Q330-215 6 Pin Schlage C Blank 1 2.20

Cut KeysPart Number Description Each

KB574 Standard 5 PinKB578 Standard 6 PinKB582 Standard 7 Pin $5.10KB794 Plain 5-pin (non-embossed)KB797 Plain 6-pin (non-embossed)KB799 Plain 7-pin (non-embossed)KB545 Large bow - 5-pin (When furnished with lock - 2 keys) additional per lock 5.70KB545 Large bow - 5-pinKB591 Large bow - 6-pin (When furnished with lock - 2 keys) additional per lock 6.80KB591 Large bow - 6-pinKB580 Emergency - 6-pin 8.60KB584 Emergency - 7-pin 9.50KB593 Emergency, large bow - 6-pin 8.90KB905 With 2" handicap access bow, 5-pin 11.70KB906 With 2" handicap access bow, 6-pinKB907 With 2" handicap access bow, 7-pin 15.70KB531 Block-O-Key construction key - 4-pin 5.50KB565 Construction key - 5-pin 5.30KB566 Construction key - 6-pinKB567 Construction key - 7-pin 5.90330055 Schlage C - 6 pin 5.00Q330-276 Schlage Split Key 6-pin 6.80

*Specify key section to key (blank) numbers.

Note: 1) Prices listed for key blanks and cut keys are for E, G and H sections only. For all other key sections add $0.80 list per key to prices shown. Letter of au tho ri za tion required for re strict ed sections;not available to stock; shipped directly to the end user.

001911-001-70 Blue Plastic Bow(not shown full size)

2” access bow meets Title 24 of The California Code for the Hand i capped.

Standard Plain(non-embossed)

Large Bow

IC Products

IC Core Key BlanksStandard Plain Both Sides Price

Standard KB628 KB718 $1.80Stamped CONTROL KB608 KB744 3.60M Series EMERGENCY KB737 KB748 5.40Blade for 2" Access Bow KB633 - 5.20Plastic Access Bow 001911-001-70 - 4.90

IC Core Cut KeysStandard Plain Both Sides

6-Pin 7-Pin 6-Pin 7-pin Price

Standard KB632-1 KB632-2 KB673-1 KB673-2 $5.40CONTROL KB609-1 KB609-2 KB778-1 KB778-2 6.90M Series EMERGENCY KB738-1 KB738-2 KB779-1 KB779-2 8.202" Access Bow KB916 KB916-1 - - 12.50

Note: 1) Specify keyway2) Order standard blanks in multiples of 50.3) Prices for key blanks and/or cut keys are for single key sections only.Key blanks 50 min. Cut keys no minimum quantity

4) For double milled key (e.g. DE, EF, FG) add $2.90 each to prices shown,minimum order quantity of 50 keys.

5) Triple and quadruple milled keys add $3.30 each to price shown, minimum order quantity of 50 keys.

6) For restricted sections add $0.80 per key Drop ship required. Not available for stock.

Best® Style SFIC Core Key BlanksStandard Plain Both Sides Price

Standard KB800* KB801* $1.80

Best® Style SFIC Core Cut KeysStandard Plain Both Sides Price

Standard 6-Pin KB807-1 KB809-1 $5.40Stamped Control 6-Pin KB811-1 KB813-1 6.90Standard 7-Pin KB807-2 KB809-2 8.20Standard Control 7-Pin KB811-2 KB813-2 12.50

Standard

StandardKey Tip

Mortise EMKTip

Best Key

Plain(non-embossed)

Clippedfor Handicap


IC Keys and Key Blanks, Disposable Construction Core

CYL-10

* KB 800 & 801 are not available in multi milled keyways.


Keys & Keying Construction Core Program

CYL-11

Notes: 1) Keyed and temporary construction cores will be installed in locks and cylinders automatically unless otherwise specified on orders.

2) Construction cores for a given project are keyed alike to one of a limited number of combinations nationwide. Different Falcon projects in the same area using the same or different contractors may use the same key. Where a higher degree of security is desired, order a set of cores in 606 or 626 finish keyed alike to a random combination. Specify “KS1.” Such cores are not returnable to Falcon but may be reused for other projects.

3) Temporary construction cores are an inexpensive alternative to interior keyed construction cores. This temporary is intended for use on interior door applications or where security on-site is not a concern.

Construction Core ProgramKeyed construction cores may be ordered with interchangeable core locks and cylinders. These cores may also be ordered separately. All keyed construction cores are assessed a non-refundable handling charge (50-231). Standard payment terms apply. Please note that this list price is only subject to a 50% discount. No additional discounts may be applied to construction cores.Features:

• 6-pin A keyway.• 7-pin A keyway.• Construction cores are a flat black finish on the face. Other colors may be provided. Contact Customer Service for available

colors.• Construction cores are furnished with no keys (NCK). Cut keys must be ordered separately.• A control key is required to install and remove construction cores. Control keys must be ordered separately.• Construction cores may be returned for credit in working condition. Credit is issued upon receipt of cores at our factory.

A Return Material Authorization (RMA) must be issued, in order for cores to be returned.

Temporary Construction Core Program (Disposable)Temporary construction cores may be ordered with interchangeable core locks and cylinders. These cores may also be orderedseparately. Standard payment terms apply. Please note that this list price is only subject to a 50% discount. No additionaldiscounts may be applied to disposable construction cores.Features:

• Conveniently fits both 6 & 7-pin SFIC applications.• No keys need to be issued.• Disposable construction cores are not returnable.• The disposable core is inserted in the lever or knob and is operated by a thumbturn, which retracts the latch bolt.

Construction Core ProgramPart Number Description Specify Price

C606CCA Construction core 6-pin Specify “H” suffix when ordering with locks, $29.50C607CCA Construction core 7-pin mortise cylinders and rim cylinders. KB632-1CCA Cut key for construction core 6-pinKB632-2CCA Cut key for construction core 7-pin 5.40

KB609-1CCA Cut control key 6-pin (order separately)KB609-2CCA Cut control key 7-pin (order separately) 6.90

1408 Disposable construction core Specify “BDC” suffix when ordering 3.6050-231F Non-refundable handling charge per core 5.20

C607CCA 1408

Non-IC Products

Conventional Mortise Cylinder Cams Part Number Application Price

1396 Cam kit for conventional cylinders $127.00 A09890-000-00 Adapter ring for 1-1/2˝ diameter cylinders 28.70 5622-STD Falcon MA CAM for conventional mortise cylinders, except MA381 33.005620-STD Falcon MA CAM for conventional mortise cylinder MA381 inside function5621-STD Falcon MA CAM for conventional mortise cylinder MA381 outside function

10-Pack PriceA08867-000-00 Falcon cyl. in Sargent and Yale (26) 48.80A09888-000-00 Falcon cyl. in Schlage L Series (13)A09894-001-00 Falcon, Ilco, Lori and Schlage cyl. in M deadbolt functions (1) 33.00A09894-002-00 Arrow, Sargent, Yale cyl. in M deadbolt functions (2)A09894-003-00 Corbin Russwin cyl. in M deadbolt functions (3)A09894-021-00 Falcon cyl. in Monarch concealed VR Delta trim (21) 48.80A09894-022-00 Arrow, Sargent, Yale cyl. in Falcon Delta trim (22)A09894-023-00 Corbin Russwin cyl. in Falcon Delta trim (23)A09897-000-00 Falcon M Series non-deadbolt functions (4) 33.00A09897-024-00 Falcon dogging cyl. in Falcon device (24) 44.70A09898-000-00 Adams Rite 4070 (16)A09899-000-00 Adams Rite MS (6) 33.00A20065-000-00 M381 outside (14)A20069-000-00 Corbin Russwin ML2200 48.80

Cylinder Tailpieces, Rim and Conventional CylindricalPart Number Application Price

1389 Tailpiece kit (assortment of tailpieces and 1416 cap tool) $159.00 B600-045 D Series double cylinder (1-3/8" - 1-3/4" doors)

1.00B600-046 D Series double cylinder (over 1-3/4" - 2-1/4" doors)B520-651 D Series single cylinder (1-3/8" - 1-3/4" doors)

2.10B520-652 D Series single cylinder (over 1-3/4" - 2-1/4" doors)Q330-164 W Series 501, 511, 581, 711 Functions

0.52Q330-165 W Series 561 Function030480-004-00 Y Series 0.74A08350-000-00 H101 0.74

10-Pack PriceA22164-000-00 X Series 561 (6 Pin) Elite & Troy 4.70A22164-001-00 X Series 561 (6 Pin) Hana, 955A22164-002-00 X Series 571 (6 Pin) Elite & Troy, 571 (7 Pin) Hana 6.70A22169-000-00 X Series 411, 501, 511, 521 (6 Pin) Elite & Troy 4.90A22169-002-00 X Series 411, 501, 511, 521 (6 & 7 Pin) HanaA28351-000-00 Rim conventional 23.00A30034-001-00 H451, H461 7.30A30038-000-00 H511 4.90A30480-004-00 B Series 7.30A30730-001-00 RU, T Series most 6-pinA30730-002-00 RU, T Series most 7-pin and T571 6-pinA30730-003-00 RU381, T381 inside 6-pin, B611 16.20A30730-004-00 RU381, T381 inside 7-pinA30730-006-00 RU571, T571 7-pin

Conventional Cylinder Tailpiece Retainers, Etc.Part Number Description 10-Pack Price

A08355-000-00 Tailpiece retainer for rim cylinder $20.50 A008395-000-00 Tailpiece retaining washer for H101 0.22A12053-000-00 Tailpiece retainer, 22164 & 22169 6.30 A24264-000-00 Tailpiece spacer 2.50 A30037-000-00 Tailpiece retainer, 30034 & 30038 6.30 B600-071 D Series Retainer Washer 1 pack / 0.20


Cams, Tailpieces, Throw Members

CYL-12

Cylinder Parts and Service Equipment


CYL-13

PIN K IT

Non-IC Products

Other PartsPart Number Application Pack Qty. Pkg. Price

008789-001-60 Wave washer - $1.10012162-000-10 Cylinder cap - 1.50031100-000-30 Hex nut for cam lock and mortise cylinders - 7.00A02750-000-00 Cam Screw 100 16.30A03039-000-00 Mortise hotel function instruction plate packet - 6.30A12165-000-00 Cap retaining pin 10 5.10A12165-100-00 Cap retaining pin 100 40.00A12166-000-00 Spring for retaining pin 100 7.20

Pin Kits, Pins, Tools and Service EquipmentPart Number Application Pack Qty. Pkg. Price

1416 Cylinder cap tool - steel $33.00 1417 Pin kit for restricted keyways (inculdes follower and cyl. Cap tool) 192.001418 Pin kit, standard (inculdes follower and cyl. Cap tool) 254.001421 Plug follower 13.301453 Depth key set, 5-pin 34.101453-1 Depth key set, 6-pin -1453-2 Depth key set, 7-pin 43.00030113-000-60 Key gauge for standard keys (.018" systems) 5.90030166-T10-30 Torx Screw Bit #10030166-T15-30 Torx Screw Bit #15 17.60030166-T20-30 Torx Screw Bit #20042613-000-60 Key gauge for restricted keyways (.025" systems) 20.3035-057 Extractor ToolA08552-000-00 Universal top pin 6.20A08553-00X-00 Bottom pins, 0 thru 9: replace; "x" with size (.018" systems)A08554-000-00 Tumbler springs 7.60A08556-000-00 Construction master pins 100 17.90A08580-00X-00 Master pins, 2 thru 9: replace; "x" with size (.018" systems)A48553-00X-00 Bottom pins, 0 thru 6: replace; "x" with size (.025" systems) 6.20A48580-00X-00 Master pins, 2 thru 6: replace; "x" with size (.025" systems

Cylinder Collars (also used for IC cylinders)605, 606

Part Number Size Shape 626 613, 625

A08790-000 9/32"A08790-001 13/32" Straight ProtectiveA08790-002 17/32" used on escutcheon $9.60 $11.60A08790-003 21/32" trimA08790-004 55/64"A08794-000 9/32"A08794-001 13/32" Tapered Protective 9.50 11.50A08794-002 17/32" used on sectional trimA08794-003 21/32"008876-000 1/8"008876-005 3/16"008876-001 1/4"008876-002 3/8" Blocking Ring 3.70 4.30

008876-003 1/2"008876-004 5/8"008862-000 n/a Rim Cylinder 3.50 4.10

See below for wave washer. Protective rings listed above include wave washer.

Doo

r R

ange

:

1³⁄₈”

to 1

⁷⁄₈"

>1⁷

⁄₈” t

o 2¹

⁄₄”

SF

IC: <

2”

D111/D211D141/D241

759-202B

256-025B

D121/D221

B520-667

NA

B220-032

D131/D231

085-202B

640-006B

540-006B

D251/D271

B520-653

AN

AN

D261/D261M

B600-041

AN

AN

”0.2

1.265” 0.67”2.875” 2.4”

0.95”

156-025B

”6.1

1.4” 1.03” 0.45”

Price Book 108AEffective July 18, 2011 • Rev. 7/11CYL-14

IC Cams, Throw Members, etc.

IC Mortise Cylinder CamsPart Number Description Price1397 Cam kit $164.00

10-Pack Price5622-IC Falcon MA CAM for SFIC mortise cylinders, except MA3815620- IC Falcon MA CAM for SFIC mortise cylinders MA381 inside function5621-IC Falcon MA CAM for SFIC mortise cylinders MA381 outside functionA12667-000-00 Sargent / Yale (7)A12667-001-00 Adams Rite MS (8)A12667-002-00 Adams Rite 4070A12667-003-00 Straight (5), M series non-deadbolt functionsA12667-006-00 Corbin Russwin master ring (25) (requires bushing A09890) $44.60 pkg of 10A12667-007-00 M series deadbolt functions (10)A12667-008-00 Schlage L Series (12)A12667-011-00 Corbin Russwin, Arrow (11)A12667-013-00 Corbin Russwin DL4000A12667-020-00 Falcon concealed vertical rod Delta trim (20)A12667-03A-00 Sargent 7737A20278-000-00 M381 outside (15)

IC Throw Members (Tailpieces) and Spacers for Cylindrical Locksets022175-000-30 X Series except X571, new style022175-001-30 X571 new style 6-pin022175-002-30 X571 new style 7-pin030739-000-30 RU, T Series most 6-pin

$2.20030739-001-30 RU, T Series most 7-pin030739-002-30 RU381, T381 inside 6-pin030739-003-30 RU381, T381 inside 7-pinQ001-055 B & Y SeriesQ330-168 W Series Levers 3.10Q330-169 W Series Knobs 3.10

A12689-000-00 Rim $8.10 pkg. of 10A12698-000-00 Retainer, IC rim cylinder $12.60 pkg. of 10A12742-001-00 Coupler and tailpiece D Series 3.90

Cylinder CollarsSee page CYL-13 for cylinder collars. –

Other PartsA12663-001-00 Throw pins, package of ten (10)A12663-002-00 Throw pins, package of ten (10)A12663-003-00 Throw pins, package of ten (10) $9.90 pkg.A12663-004-00 Throw pins, package of ten (10)A12664-010-00 Drive washer, package of ten (10)002807-000-30 Mortise cylinder security screw 0.52

IC Products


IC Service Equipment & Supplies

CYL-15

IC Products

ToolsPart Number Description Price Each1208 Key bitting punch machine, standard A2 System $2,649.001392 Capping pin, Best style capping 27.401393 Capping block, Best style capping 127.001398 Core and key stamping fixture 148.001400 IC mortise cyl. assy./ disassembly tool set w/punch 190.001401 IC mortise cyl. assy./ disassembly tool 174.001402 IC cam staking center punch 15.901405 Ejector tool 18.001407 Mortise cylinder installation wrench 29.601411 Pinning block set, Falcon spring cover cores 99.501414 Pinning block only, Falcon spring cover cores 66.301415 Tamping Plate 36.30012612-000-60 Key Gauge (A2 System) 12.10012727-000-30 Emergency tool, for M301, 311, 321 2.10030425-000-60 Key Gauge (A4 System) 12.10031034-000-30 A4 System depth bar for key bitting punch 181.00

Pin Kits1404 (standard) Pin kit, A2 System complete in wooden case; Falcon spring cover cores1391 Pin kit, A2 System complete in wooden case; Best style capping $595.001403 Pin kit, A4 System complete in wooden case; Falcon spring cover cores1390 Pin kit, A4 System complete in wooden case; Best style capping

Pins, Springs, etc.A12635-0xx-00 A2 top pins, #2 through #19; replace “xx” with size, 100/pkgA12636-0xx-00 A2 bottom pins, #0 through #9; replace “xx” with size, 100/pkg $9.10 pkgA30375-0xx-00 A4 top pins, #1 through #11; replace “xx” with size, 100/pkgA30376-0xx-00 A4 bottom pins, #0 through #5; replace “xx” with size, 100/pkgA12637-000-00 Tumbler Spring, 100/pkg. 7.60 pkgA12637-500-00 Tumbler Spring, 500/pkg. 25.10 pkgA12638-000-00 Caps for Best style cores, 500/pkg.A12639-001-00 Spring cover, 6-Pin, 100/pkg. 22.90 pkgA12639-002-00 Spring cover, 7-Pin 100/pkg.

Keying and Stamping Charges

Price Book 108AEffective July 18, 2011 • Rev. 7/11CYL-16

Master KeyingPart Number Description List Price

50-210F Conventional cylinder Master Keyed (MK), Grand Master Keyed (GMK), $12.20Emergency Master Keyed (EMK), and Single Keyed (SKD) groups

–Interchangeable core Master Keyed (MK), Grand Master Keyed (GMK), No ChargeEmergency Master Keyed (EMK), and Single Keyed (SKD) groups

Construction Keying – Conventional CylinderPart Number Description List Price

50-211F Cylinder Construction Keyed (CK) $4.0050-224F Cylinder Block-O-Keyed (BOK)60-000F Pack change keys independently for construction keying No Charge

Other Keying (Non-Masterkeyed)Part Number Description List Price

–Cylinder keyed different (KD) or keyed alike to a Falcon selectedcombination (KA) in sets of 2 or more

No Charge

– Cylinder 0-bitted or 1-bitted, as applicable No Charge50-212F Conventional cylinder keyed to a specific combination $6.5050-215F Standard cylinder extra key charge 5.0050-232F IC core extra key charge 5.4060-001F Pack change keys independently for non-construction keying 0.42 per key

Notes: 1) Any cylinder operated by keys other than its own change key, or Single Keyed (SKD) groups within amasterkey system are subject to masterkeying charges. The Falcon Masterkey department determinesand makes the final decision in the selection and use of key. 100% system expansion is allowed fornew masterkey systems, unless otherwise specified.

2) Construction keyed cylinder charges are in addition to masterkeying charges.

3) PKI (Pack Keys Independently) packaging is included at no additional charge.

4) Construction keying is not available with SFIC cylinders. Construction cores may be ordered for interchangeable core locks and for mortise and rim cylinders, for use during construction. See Construction Core Program.

5) Block-O-Key construction keying requires 6-pin cylinders.

6) Construction keys must be ordered separately. See Keys & Keyblanks.

7) Conventional cylinders are available 0-bitted.

8) Conventional restricted key section cylinders are furnished 1-bitted unless otherwise specified.

9) Falcon locks and cylinders are furnished with Falcon G key section, keyed differently (KD) unlessotherwise specified.

10) Falcon SFIC cylinders are furnished with A keyway, uncombinated, without keys when not specified.

11) SFIC cylinders are furnished uncombinated without keys when not specified.

12) All 50-xxx charges are subject to a 50% discount unless quoted otherwise.

13) All 50-xxx charges are added as separate line items and priced separately.

Keying and Stamping Charges


CYL-17

Bitting Lists (Keying Transcripts)Part Number Description List Price

50-123F Bitting list for factory masterkeyed products (requires written authorization from end-user on letterhead) $135.00

50-120F Establish new masterkey system for field masterkeying, up to 50 bittings. 123.0050-121F Each additional bitting for field masterkeying. 0.84

- Request special quotation for large or complex systems -

Residential MasterkeyingPart Number Description List Price

50-223F Residential style masterkeying $4.00

Special & Custom Die StampsPart Number Description List Price

50-219F Keys stamped with custom or special dies – i.e, STATE OF FLORIDA, DO NOTDUPLICATE, etc. $1.50

50-230F Die with standard letter and/or numbers – die remains property of Falcon Lock Co. 877.00

50-234F Die with custom logo or typeface – die remains property of Falcon Lock Co. Send art work forquotation

Key & Core StampingPrice

Part Number Description Standard I-CoreVKC – Visual Key Control, standard symbols (AA1, AA2, etc. on keys (2)

50-216F and/or cylinders. Designate CKC for I-Core marked on side. CKC not $3.50 –available for standard cylinders.

50-217F VKC – Visual Key Control, per extra key (more than 2 per lock) 1.50 $1.50

50-233F Non-standard code letters or numbers than industry standard key symbols on key (5 max.) 3.50 3.50

50-226F Non-standard code letters or numbers than industry standard key symbols on core or cylinder (5 max.) 3.50 3.50

50-229F Serial numbering (in addition to any other stamping) per key 1.50 1.50


Notes

CYL-18


MSC-1

MiscellaneousIntroduction

Table of Contents

Padlocks MSC-2

Complete Lock Pricing MSC-3

Cable Locks MSC-4

Auxiliary Products MSC-5

Padlocks . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5

Padlocks, Parts and Accessories . . . . . . .MSC-6

Complete Padlocks MSC-8

Lock Mounts . . . . . . . . . . . . . . . . . . . . . . .MSC-9


Notes: 1) Key is removable with shackle in locked position only.2) Falcon padlocks now discount as complete locks and not as parts.

PadlocksFinish

Cat No. Description 606

955-1P Deadlocking type - 1" shackle $117.00955-2P Deadlocking type - 2" shackle 127.00955-6P Deadlocking type - 6" shackle

Padlocks Available in:606

OptionsDescription Price

Cylinders5-pin (drilled for 6) Standard6-pin No Charge7-pin (per cylinder) $11.50Less cylinder Deduct $16.60Competitor’s keyways in standard cylinder model (see page 8) No ChargeKeyingMaster keying, conventional cylinder See CYL-16Construction master keying, con ven tion al cylinder See CYL-16


Auxiliary Products

MSC-2


Padlocks • Auxiliary Products

MSC-3

Standard Features for Commercial Series Padlocks - StockCertification Meets or exceeds ASTM standards for standard steel shackle, shackle cutting and

corrosion resistance.Lock Body Chrome plated brass - resists corrosion.Shackle Hardened steel alloy, double deadbolt locking mechanism.Cylinder* Accepts Falcon 6 or 7-pin small format interchangeable core (SFIC), as well as SFIC products from

other manufacturers.

*All padlocks supplied less cylinder. Cylinders must be ordered separately.

Important Ordering InformationLocks must be ordered in case quantities; this does not apply to factory ordered Falcon branded 955 Series locks.

Case quantity is listed with each product. All prices listed are unit prices. Note: All Falcon cylinders will ship

separately.

Introduction

Standard Features for Commercial Series Cables - Interchangeable CoreLock Head Die-cast zinc, 407 satin finishCable Braided steel vinyl coated for greater cut resistance than twisted cablesCylinder* Accepts Falcon 6 or 7-pin small format interchangeable core (SFIC), as well as SFIC products from

other manufacturers.

*All cables supplied less cylinder. Cylinders must be ordered separately.

KC Series - 2', 4' lengths40 Series - 3/8" Shackle diameter

10 Series - 1/4" Shackle diameter 20 Series - 5/16" Shackle diameter

Price Book 108AEffective July 18, 2011 • Rev. 7/11MSC-4

Auxiliary Products • Cable Locks


MSC-5

Commercial Series • Auxiliary Products

Notes: 1) Product is shipped without cylinder. For cylinder options: see Cylinders.2) Keying options: see Keys & Keying. See Terms & Conditions for more information.3) Case quantity is 6.

Notes: 4) Product is shipped without cylinder. For cylinder options: see Cylinders.5) Keying options: see Keys & Keying. See Terms & Conditions for more information.6) Case quantity is 1.

Padlocks - Small Format Interchangeable Core (SFIC) - Less Cylinder Shackle Dimensions

Part Number A B C List PriceSolid Brass Body - KS11 2 Series (Body Dimensions: 1 25/32" wide, 2 3/16 " high, 7/8" thick) KS11D1200 1/4" (6.4mm) 1 1/2" (38mm) 3/4" (19mm) $35.00 KS11F1200 2" (51mm) 36.50 Chrome Plated Brass Body - KS21 Series (Body Dimensions: 1 25/32" wide, 2 3/16" high, 7/8" thick)KS21D1200 5/16" (8mm) 1 1/2" (38mm) 3/4" (19mm) $37.20 KS21F1200 2" (51mm) 39.00 Chrome Plated Brass Body - KS41 Series (Body Dimensions: 1 15/16" wide, 2 3/16" high, 7/8" thick) KS41D1200 3/8" (9.5mm) 1 1/2" (38mm) 3/4" (19mm) $37.20 KS41F1200 2" (51mm) 39.00

Cables - SFIC - Less Cylinder

Part Number Cable Diameter Cable Length List PriceBraided Steel Key Cable - KC2 SeriesKC215A130 5/8" (15mm) 2' (60cm) $70.60KC215B130 5/8" (15mm) 4' (121cm) 75.60



separately.

Padlocks

Note: 1) Case quantity is 6.

10 Series Shackles

3/4” 1 1/2” 2“ 4“

40 Series Shackles

3/4” 1 1/2” 2“ 4“

20 Series Shackles

3/4” 1 1/2” 2“ 4“

Note: 2) Case quantity is 6.

Commercial Series: Replacement ShacklesShackle Dimensions

Part Number A B C List PriceHardened Steel Shackle - For Use with 10 Series PadlocksKZ11A10 3/4" (19mm) $5.90 KZ11D10 1/4" (6.4mm) 1 1/2" (38mm) 3/4" (19mm) 7.20KZ11F10 2" (51mm) 7.30 KZ11G10 4" (102mm) 10.30 Hardened Steel Shackle - For Use with 20 Series PadlocksKZ11A20 3/4" (19mm) $7.20 KZ11D20 5/16" (8mm) 1 1/2" (38mm) 3/4" (19mm) 8.90KZ11F20 2" (51mm) 9.30KZ11G20 4" (102mm) 12.90 Hardened Steel Shackle - For Use with 40 Series PadlocksKZ11A40 3/4" (19mm) $9.00 KZ11D40 3/8" (9.5mm) 1 1/2" (38mm) 3/4" (19mm) 12.70 KZ11F40 2" (51mm) 13.40 KZ11G40 4" (102mm) 18.40 Brass Shackle - For Use with 10 Series PadlocksKZ12A10 3/4" (19mm) $5.90 KZ12D10 1 1/2" (38mm) 3/4" (19mm) 7.20 KZ12F10 1/4" (6.4mm) 2" (51mm) 7.30 KZ12G10 4" (102mm) 10.30 Brass Shackle - For Use with 20 Series PadlocksKZ12A20 3/4" (19mm) $7.20 KZ12D20 5/16" (8mm) 1 1/2" (38mm) 3/4" (19mm) 8.90 KZ12F20 2" (51mm) 9.30 KZ12G20 4" (102mm) 12.90 Brass Shackle - For Use with 40 Series PadlocksKZ12A40 3/4" (19mm) $9.00 KZ12D40 3/8" (9.5mm) 1 1/2" (38mm) 3/4" (19mm) 12.70 KZ12F40 2" (51mm) 13.40 KZ12G40 4" (102mm) 18.40

Commercial Series: AccessoriesPart Number Description List PriceNickel Plated Steel ChainKZ200AL Retaining 9" Nickel Plated Steel Chain $9.00



separately.


Auxiliary Products • Commercial Series Padlocks, Parts and Accessories


Commercial Series • Auxiliary Products

MSC-7

Parts and Accessories - Stock

Note: 1) Case quantity is 30 except: KZ38BA1, KZ38BA2 - case quantity 20; KZ3700 - case quantity 6; KZ390AL - case quantity 1.

Commercial Series - Replacement PartsPart Number Description List PriceKit - Padlock & Cables KZ390AL Service Repair Kit $529.00 Replacement Parts - Padlocks - SFIC KZ35AA1 Shackle Spring, 10 Series $0.54 KZ35AA2 Shackle Spring, 20 Series, 80 Series 0.54 KZ35AA3 Shackle Spring, 40 Series, 90 Series 0.54 KZ35AA4 Shackle Spring, 70 Series 0.54 KZ35AB1 Shackle Mounting Screw, 10, 20, 40 Series 1.60 KZ35AB2 Shackle Mounting Screw, 70,80,90 Series 1.60 KZ35AC1 Locking Ball Bearing, 10,20,40,80, 90 Series 1.20 KZ35AC2 Locking Ball Bearing, 70 Series 1.70 KZ35EC1 Bumper, 10, 20 Series 0.84 KZ35EC2 Bumper, 40 Series 0.84 KZ35EC3 Bumper, 80 Series 0.84 KZ35EC4 Bumper, 90 Series 0.84 KZ31CA1 Locking Cam, 10,20,40,80,90 Series 2.70 KZ31CA2 Locking Cam, 70 Series 2.70 KZ31CB1 Key Retaining Locking Cam, 10,20,40,80,90 Series 1.60 KZ31CB2 Key Retaining Locking Cam, 70 Series 1.60 KZ31CC1 Steel Retainer Plate, 10,20,40,80,90 Series 1.30 KZ31CC2 Steel Retainer Plate, 70 Series 1.30 KZ31CD0 Steel Retainer Plate Screw 2.00 KZ31DA0 Throw Member 3.10 KZ37000 Installation Tool 4.10 Replacement Parts - CablesKZ33CA0 Throw Member, SFIC $5.10 KZ33DB0 Washer, SFIC 0.54 KZ34DC0 Throw Member Mounting Screw, SFIC 1.30 KZ36EA0 Dust Cover, SFIC 2.20 KZ36EB0 Dust Cover Screw, SFIC 0.74

Dust Cover Screws

Dust Cover

Cylinder

Lock Head

Washer

Throw MemberMounting Screw

Kryptonite by Schlage Commercial Padlock SeriesExploded View - SFIC

KS Series Padlock PartsExploded View - SFIC

KC Series Cable Parts

SFIC

Throw Member


Auxiliary Products • Complete Padlocks

MSC-9

Special Security • Auxiliary Products


855101 855118 855125 855132

855149 994848

Specialty Security ProductsSecurity Hasps

Part Number Body Dimension Price Each

855101 8 1/2" x 4 1/2" 3 $44.20

855118 7 3/4" x 1 3/4" 6 13.90

855125 5" x 2" 6 13.40

855132 4 1/4" x 1 5/8" 6 15.50

855149 7 1/4" x 1 5/8" 6 13.90

Hasp

994848 4 1/2" x 1 5/8 6 $7.20

Lock MountsPart Number For Product Backset Price

21 B, T and W Lever Series22 D, X, Y and W Knob Series23 H Series24 RU Series35-MA MA Series (101)36-MA MA Series (371, 381, 411, 431, 441) 2-3/4" $103.0037-MA MA Series (521, 551, 561, 581)38-MA MA Series (301, 311, 321)39-MA MA Series (531, 541, 571, 621, 641)40-MA MA Series (451)002086-000-70 Acrylic Mounting Ring N/A 29.10

No. 21 No. 22 No. 23 No. 24 No.35-410 No. 002086-000-70


Auxiliary Products • Lock Mounts

Note: 1) For MA Series, locks must be 1-3/4" door thickness and left handed.


Product Index

Index-1

005099-000 . . . . . . . . . . . . . . . . . . . . . . . . .MA-11001911-001-70 . . . . . . . . . . . . . . . . .CYL-9, CYL-10002086-000-70 . . . . . . . . . . . . . . . . . . . . . .MSC-10002762-000 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11002770-016-30 . . . . . . . . . . . . . . . . . . .RU-11, T-12002807-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14005075 . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8005099-000 . . . . . . . . . . . . . . . . . . . . .MA-11, RU-4005099-000-30 . . . . . .B-5, H-5, T-9, X-4, X-5, Y-5005099-000-60 . . . . . . . . . . . . . . . . . . . . . . . . . .X-5005161-000 . . . . . . . . . . . . . . . . . . . . .B-5, T-9, X-5005164-000 . . . . . . . . . . .B-5, H-5, RU-4, T-9, X-5008789-001-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-13008862-000 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13008876-000 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13008876-001 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13008876-002 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13008876-003 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13008876-004 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13008876-005 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1301-043 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-501-044 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-501-045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-501-046 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5, Y-501-048 . . . . . . . . . . . . . . . . . . . . .B-5, T-9, X-4, Y-501-049 . . . . . . . . . . . . . . . . . . . . .B-5, T-9, X-4, Y-5012162-000-10 . . . . . . . . . . . . . . . . . . . . . . .CYL-13012191-000-60 . . . . . . . . . . . . . . . . . . . . . .X-4, X-5012191-003-70 . . . . . . . . . . . . . . . . . . . . . .X-4, X-5012612-000-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-15012727-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-15021164-016 . . . . . .B-7, H-5, RU-11, T-12, X-7, Y-5022104-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11022105-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11022106-002-55 . . . . . . . . . . . . . . . . . . .RU-11, T-11022108-000-60 . . . . . . . . . . . . . . . . . . .RU-11, T-11022112-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11022175-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14022175-001-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14022175-002-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14022258-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022258-008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022258-009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022290-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022920-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022950-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022950-008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022953-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022980-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022980-008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022980-009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022981-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022986-001-50 . . . . . . . . . . . . . . . . . . .RU-11, T-11024030-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7024416-012 . . . . . .B-7, H-5, RU-11, T-12, X-7, Y-5030113-000-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-13030166-T10-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-13030166-T15-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-13030166-T20-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-13030290 . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8030425-000-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-15030480-004-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12030703-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030704-002-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030706-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030709-000-60 . . . . . . . . . . . . . . . . . . .RU-11, T-11030712-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030712-001-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030718-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030718-001-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030722-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030724-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030726-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030726-007-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030728-000 . . . . . . . . . . . . . . . . . . . . . .RU-11, T-11030733-000-55 . . . . . . . . . . . . . . . . . . .RU-11, T-11030739-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14030739-001-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14030739-002-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14

1397 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-141398 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151401 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151402 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151403 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151404 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151405 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151407 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151408 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-111411 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151414 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151415 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151416 . . . . . . . . . . . . . . . . . . . . . . . .CYL-12, CYL-131417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-131418 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-131421 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-131453 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-131453-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-131453-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1321 . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5, MSC-1022 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1023 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1024 . . . . . . . . . . . . . . . . . . .MA-10, CYL-9, MSC-10250 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-7251 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2252 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2253 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2314691 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4314692 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4314693 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4314694 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-431471S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4315491 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4315492 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4315493 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4315494 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4330055 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-935-057 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1335-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1036-071 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-836-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1037-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1038-031 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-838-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1039-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1040-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1050-120F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-121F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-123F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-210F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1650-211F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1650-212F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1650-215F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1650-216F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-217F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-219F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-223F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-224F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1650-226F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-229F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-230F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-231F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1150-232F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1650-233F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-234F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-175133-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-45161 . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5, T-9, X-45164 . . . . . . . . . . . . . . . . .B-5, B-6, RU-4, T-9, X-45183 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-45185 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-45185-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-45186 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-45187 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-45188 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-45189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-45620- IC . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-145620-STD . . . . . . . . . . . . . . .CYL-2, CYL-8, CYL-125621-IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-14

030739-003-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14030740-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030740-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030740-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030742-000 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030742-001 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030742-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030744-000 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030744-001 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030744-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030755-005-30 . . . . . . . . . . . . . . . . . . .RU-11, T-12030831-004-30 . . . . . . . . . . . . . . . . . . .RU-11, T-12030926-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030926-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030926-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030927-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030927-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030927-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030928-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030928-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030928-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030929-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030929-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030929-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030930-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030930-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030930-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030996-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030996-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030996-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10031034-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-15031100-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-13031416-000-70 . . . . . . . . . . . . . . . . . . .RU-11, T-11031452-000 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-10031453-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031471 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031471-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031471-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031472 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031472-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031473 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031473-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031474 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031474-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031477 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031477-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031511-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11031514-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11031515-004-30 . . . . . . . . . . . . . . . . . . . . . . . . .T-12031519-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11031531-006-30 . . . . . . . . . . . . . . . . . . . . . . . . .T-12031533-006-30 . . . . . . . . . . . . . . . . . . .RU-11, T-12031541-006-30 . . . . . . . . . . . . . . . . . . . . . . . .RU-11031700-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6031701-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6031702-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6031703-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6031705-000-30 . . . . . . . . . . . . . . . . . . . . . . . . . .B-7031718-000 . . . . . . . . . . . . . . . . . . . . . . . . .B-7, X-7031719-000 . . . . . . . . . . . . . . . . . . . . . . . . .B-7, X-7031741-000-50 . . . . . . . . . . . . . . . . . . . . . . . . . .B-7031748-000-70 . . . . . . . . . . . . . . . . . . . . . . . . . .X-7031749-000-70 . . . . . . . . . . . . . . . . . . . . . . . . . .X-7042613-000-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-1310-064 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-810-087 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-810-092 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-810-094 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-810-095 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-812-626 . . . . . . . . . . . . . . . . . . . . . . .D100-7, D200-71208 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151387 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11, T-111388 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11, T-111389 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-121390 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151391 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151392 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151393 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151396 . . . . . . . . . . . . . . . . . . . . . . . . .MA-11, CYL-12


Product Index

Index- 2

5621-STD . . . . . . . . . . . . . . .CYL-2, CYL-8, CYL-125622-IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-145622-STD . . . . . . . . . . . . . . . . . . . . .CYL-8, CYL-1257420 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557421 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557425 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557430 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557431 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557435 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5, B-657620 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557621 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557625 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557630 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557631 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557635 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-560-000F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1660-001F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1661-509 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-761-510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7855101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9855118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9855125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9855132 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9855149 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-992320 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-492321 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-492330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-492331 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4945 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-8950 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2951 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2954 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2955-1P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-2955-2P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-2955-6P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-2984D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2985 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-298535 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-498538 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4985D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2986 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2987 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-8988 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-898835S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-498838S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4990 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-8992 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-8994848 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9A008395-000-00 . . . . . . . . . . . . . . . . . . . . . .CYL-12A02750-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A03039-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A03519-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7A05133-004-630 . . . . . . . . . . . . . . . . . . . . . . . . .X-5A05183-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5A05183-004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5A05185-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-5A05185-004 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-5A05186-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5A05187-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5A05188-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5A05189-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5A08350-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A08355-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A08552-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08553-00X-00 . . . . . . . . . . . . . . . . . . . . . .CYL-13A08554-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08556-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08580-00X-00 . . . . . . . . . . . . . . . . . . . . . .CYL-13A08790-000 . . . . . . . . . . . . . . . . . . . . . . . . . CYL-13A08790-001 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08790-002 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08790-003 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08790-004 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08794-000 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08794-001 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08794-002 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08794-003 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08867-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09888-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09890-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12

A23160-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23161 . . . . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23161-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A23161-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23161-03 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23161-05 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23161-06 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23161-07 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23162 . . . . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23162-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23165 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A23165-02 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A23166 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23167 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23169 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23171-01 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23171-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23171-05 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23171-06 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23171-07 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23172-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23174 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5

A09894-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09894-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09894-003-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09894-021-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09894-022-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09894-023-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09897-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09897-024-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09898-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09899-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A12053-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A12165-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A12165-100-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A12166-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A12635-0xx-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A12636-0xx-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A12637-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A12637-500-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A12638-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A12639-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A12639-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A12663-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12663-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12663-003-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12663-004-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12664-010-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-003-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-006-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-007-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-008-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-011-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-013-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-020-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-03A-00 . . . . . . . . . . . . . . . . . . . . . . CYL-14A12689-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12698-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12742-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A20065-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A20069-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A20278-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A22161-005-00 . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A22164-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A22164-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A22164-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A22169-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A22169-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A23151 . . . . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23151-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A23151-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23151-03 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23151-05 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23151-06 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23151-07 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23152 . . . . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23152-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A23155-02 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A23159 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-4A23159-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4


Product Index

Index- 3

A23174-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23260-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A24264-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A28351-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30028 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A30028-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A30034-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30036-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A30037-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30038-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30040 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A30040-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A30375-0xx-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A30376-0xx-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A30480-004-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30730-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30730-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30730-003-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30730-004-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30730-006-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30746-000-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30747-000-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30748-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30748-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30749-060-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30749-070-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30753-00 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10A30753-01 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10A30756-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30756-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30758-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30758-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30759-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30759-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30760-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30760-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30761-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30765-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30767-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30767-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30769-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30769-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30773-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30773-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30905-001-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30905-060-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30906-070-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30913-000-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30913-001-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A31469-001 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31469-002 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31469-003 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31469-004 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31469-01D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31469-02D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31469-03D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31469-04D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31517-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A31517-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A31518-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A31518-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A31544-00 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10A31549-01D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31549-02D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31549-03D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31549-04D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31706-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31707-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31708-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31708-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31708-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31708-003 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31709-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31709-001-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31714-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6

A92330-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A92330-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A92331-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A92331-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A98535-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A98535-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A98538-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A98538-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A98835-0SD . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4A98838-0SD . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4AE77012-IE . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11AE77012-IT . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11AE77012-OC . . . . . . . . . . . . . . . . . . . . . . . . .MA-11AE77012-OK . . . . . . . . . . . . . . . . . . . . . . . . .MA-11AE77012-OP . . . . . . . . . . . . . . . . . . . . . . . . .MA-11AE77012-OT . . . . . . . . . . . . . . . . . . . . . . . . .MA-11AE77029-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AE77100-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AE77140-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AE77280-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AE77526-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AS5813 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11AS75319 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10AS76029-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AS76100-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AS76140-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AS76280-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AS76319 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10AS76526-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AS76853 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10B302-041 . . . . . . . . . . . . . . . . . . . . D100-7, D200-7B302-045 . . . . . . . . . . . . . . . . . . . .D100-7, D200-7B520-283 . . . . . . . . . . . . . . . . . . . .D100-8, D200-8B520-298 . . . . . . . . . . . . . . . . . . . .D100-9, D200-9B520-649 . . . . . . . . . . . . . . . . . . . .D100-8, D200-8B520-650 . . . . . . . . . . . . . . . . . . . .D100-8, D200-8B520-651 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12B520-652 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12B520-662 . . . . . . . . . . . . . . . . . . .D200-9, D200-10B520-663 . . . . . . . . . . . . . . . . . . .D200-9, D200-10B600-018 . . . . .D100-7, D100-9, D200-7, D200-10B600-045 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12B600-046 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12B600-047 . . . . . . . . . . . .D100-9, D200-9, D200-10B600-048 . . . . . . . . . . . . . . . . . . .D200-9, D200-10B600-053 . . . . . . . . . . . .D100-9, D200-9, D200-10B600-066 . . . . . . . . . . . .D100-9, D200-9, D200-10B600-071 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12B600-078 . . . . . . . . . . . .D100-9, D200-9, D200-10B600-100 . . . . . . . . . . . .D100-9, D200-9, D200-10B600-101 . . . . . . . . . . . .D100-9, D200-9, D200-10C262 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C265 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C603-897 . . . . . . . . . . . .D100-9, D200-9, D200-10C606CCA . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-11C607 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-7, CYL-11C607CCA . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-11C942 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C943 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C945 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C953 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C959 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C979 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C982 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C987 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C988 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C992 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C997 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8E77012-IB . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77012-IC . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77012-IK . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77012-IP . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77301 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77306 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77307 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11

A31714-001-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31715-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31715-001-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31716-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31716-001-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31727-005-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A31739-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31739-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31750-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31750-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31751-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31751-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31764-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31767-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-7A48553-00X-00 . . . . . . . . . . . . . . . . . . . . . .CYL-13A48580-00X-00 . . . . . . . . . . . . . . . . . . . . . .CYL-13A57420-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57420-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57421-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A57421-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57425-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A57425-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57430-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57430-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57431-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57431-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57435-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A57435-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57620-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A57620-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57621-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A57621-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57625-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57625-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57630-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A57630-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57631-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A57631-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57635-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57635-00D . . . . . . . . . . . . . . . . . . . . . . . . B-5, H-5A74420-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A74421-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A74425-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A74430-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A74431-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A74435-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A76429-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A76439-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A7801-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7802-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7804-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7805-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7806-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7807-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7808-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7809-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7813-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7814-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7815-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7816-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7819-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7820-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7821-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7822-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7829-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7830-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7831-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7851-12-xx . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7851-24-xx . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7881-12-xx . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7881-24-xx . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A8737-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9A8737-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9A8737-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9A8737-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9A8737-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9A92320-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A92320-00D . . . . . . . . . . . . . . . . . . . . . . . . T-9, X-4A92321-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A92321-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4


Product Index

Index- 4

F605-359 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-10J250-028 . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8J520-028 . . . . . . . . . . . . . . . . . . . . .D100-9, D200-9KB525 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB531 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB536 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB544 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB565 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB566 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB567 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB573 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB574 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB577 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB578 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB579 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB580 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB581 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB582 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB584 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB590 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB591 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB592 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB593 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB608 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB609-1 . . . . . . . . . . . . . . . . . . . . .CYL-10, CYL-11KB609-1 . . . . . . . . . . . . . . . . . . . . . . . .CCA CYL-11KB609-2 . . . . . . . . . . . . . . . . . . . . . CYL-10, CYL-11KB609-2CCA . . . . . . . . . . . . . . . . . . . . . . . .CYL-11KB628 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB632-1 . . . . . . . . . . . . . . . . . . . . .CYL-10, CYL-11KB632-1CCA . . . . . . . . . . . . . . . . . . . . . . . .CYL-11KB632-2 . . . . . . . . . . . . . . . . . . . . .CYL-10, CYL-11KB632-2CCA . . . . . . . . . . . . . . . . . . . . . . . .CYL-11KB633 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB673-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB673-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB718 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB737 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB738-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB738-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB744 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB748 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB751 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB761 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB771 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB778-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB778-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB779-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB779-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB794 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB797 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB799 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB807-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB807-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB809-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB809-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB811-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB811-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB813-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB813-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB905 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB906 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB907 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB916 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB916-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KC215A130 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5KC215B130 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5KS11D1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5KS11F1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5KS21D1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5KS21F1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5KS41D1200 . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-5KS41F1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5KZ11A10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11A20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11A40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11D10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11D20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11D40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6

Q330-168 . . . . . . . . . . . . . . . . . . . . . . .W-8, CYL-14Q330-169 . . . . . . . . . . . . . . . . . . . . . . .W-8, CYL-14Q330-170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-8Q330-175 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7Q330-176 . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7Q330-177 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7Q330-178 . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7Q330-182 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-8Q330-210 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-211 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-215 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9Q330-237 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q330-238 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q330-239 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-240 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-241 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-242 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-243 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-245 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q330-246 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q330-247 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-248 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-249 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-250 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-251 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-253 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7Q330-254 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7Q330-256 . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7Q330-257 . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7Q330-270 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-11Q330-271 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-11Q330-272 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11Q330-273 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11Q330-276 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9Q330-282 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-8Q500-010 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-012 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-014 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-021 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-046 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-054 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-056 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-057 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-058 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-059 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-064 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-066 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-067 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-069 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-070 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-072 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3R525-256 . . . . . . . . . . . . . . . . . . . .D100-9, D200-9S76012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10S76206 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76301 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76306 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76307 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76802 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76806 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76816 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S77801-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9S77804-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9S77805-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9S77811-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9S77815-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9S77816-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9S77819-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9S77820-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9

KZ11F10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11F20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11F40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11G10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ11G20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ11G40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ12A10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ12A20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ12A40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ12D10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ12D20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ12D40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ12F10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ12F20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ12F40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ12G10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ12G20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ12G40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ200AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ31CA1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ31CA2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ31CB1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ31CB2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ31CC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ31CC2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ31CD0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ31DA0 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ33CA0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ33DB0 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ34DC0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AA1 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AA2 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AA3 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AA4 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AB1 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AB2 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AC2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35EC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35EC2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35EC3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35EC4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ36EA0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ36EB0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ37000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-7KZ390AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7M204-198 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-11PE1396 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11Q001-046 . . . . . . . . . . . . . . . . . . . . . .B-5, H-5, Y-5Q001-048 . . . . . . . . . . . . . . .B-5, H-5, T-9, X-5, Y-5Q001-049 . . . . . . . . . . . . . . .B-5, H-5, T-9, X-5, Y-5Q001-055 . . . . . . . . . . . . . . . . . . . . . . . .Y-5, CYL-14Q033-066 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q033-067 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q033-068 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q033-069 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q033-070 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q033-071 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q033-072 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q033-073 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q033-074 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q033-075 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q033-076 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q033-077 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q033-078 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q033-079 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-152 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q330-153 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q330-154 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q330-155 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q330-156 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-157 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-158 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-159 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-160 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-161 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-164 . . . . . . . . . . . . . . . . . . . . . . .W-8, CYL-12Q330-165 . . . . . . . . . . . . . . . . . . . . . . .W-8, CYL-12Q330-166 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-167 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5

Price Book 2011A • Effective July 18, 2011 • Rev. 7/11

Prices subject to change without notice

Table Of ContentsGeneral Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Factors Affecting Exit Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3New Nomenclature Conversion Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Exit Devices19-R Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-619-V Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-819 Series Device Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 924-R Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1224-V Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1424-C Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-1624-C-WDC Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-1824 Series Device Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1925-R Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-2225-V Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-2425-M Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-2625-C Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-2825-C-WDC Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-3025 Series Device Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-32XX-R Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-36XX-V Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-38XX-M Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-40XX-C Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41-42XX-C-WDC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-44XX Series Device Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

AccessoriesPowers Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 33Electric Power Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 33DE5101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 33Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Trim - How to Order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Trim / Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-53Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Cylinder Dogging Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Dummy Touch Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Electric and Alarm Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Extension Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Mortise Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Mullions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Sex Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Shim Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58SLM Blocking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Parts19 Series Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5924 Series Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-6125 Series Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-63XX Series Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-6519 Series Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 668500 Mortise Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Mullions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6624 Series Trim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67-6825 Series Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Maintenance Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71-72

1 Price Book 2011A • Effective July 18, 2011 • Rev. 7/11


General InformationAll products listed meet ANSI A156.3 Grade 1 standard.

Devices will be furnished for hollow metal doors 3'0" x 7'0" x 1-3/4" full flush, with 5/8" high frame stopsunless specified otherwise.

DOOR WIDTHSEXIT DEVICES for door widths exceeding 4'0" are custom applications. Specify the exact door width and consultfactory for price and availability. For device widths on narrow stile aluminum and glass doors, consult factory.

DOOR THICKNESSEXIT DEVICES are furnished at prices listed for door thicknesses of 1 3/4" with standard centerlines. Other doorthicknesses and/or offset installations may require additional charges for the device, trim, control and/or strike.Consult factory.

DOOR HEIGHTS/DEVICE CENTERLINESURFACE and CONCEALED VERTICAL ROD DEVICES for heights over 7'0" up to 8'0", extension rods are furnishedat no additional charge. For heights over 8'0" up to 10'0" extension rods are furnished at prices shown on page 56.For doors higher than 10'0" or when centerline is other than standard, specify exact height. Consult factory for price.

161 OR 86 DOOR PREPARATIONSWhen devices will apply over a 161 or 86 door preparation, consult factory.

DEVICE MOUNTING SCREWSMachine screws are furnished with Fire Exit Devices. Sheet metal screws are furnished with Panic Devices. Machinescrews can be substituted at no additional charge, specify AMS.

SUBSTITUTION OF OUTSIDE TRIM OR STRIKESWhen other than standard is desired, deduct price of standard and add price of item used. Check catalog forcompatibility.

ELECTRIC ACCESSORIESWhen specifying Electrical Products, consult catalog or factory to insure all coordinating accessories have beenconsidered. All electric devices must use respective power supply for warranty to apply.

FINISHESBHMA US Description BHMA US Description

600 USP Prime Coat 626 US26D Chromium, dull605 US3 Brass, polished 628 US28 Anodized Aluminum606 US4 Brass, dull 629 US32 Stainless Steel, polished612 US10 Bronze, dull 630 US32D Stainless Steel, satin613 US10B Brass, dull--oxidized--oil rubbed 689 SP28 Lacquer Sprayed Aluminum619 US15 Satin Nickel Plated, Clear-coated 695 SP313 Sprayed Duranodic622 US19 Dull Black, painted 710 313AN Anodized Duranodic625 US26 Chromium, polished

Reference Notes:When split finish is desired, the finish listed first is understood to be the outside finish.SP28 and SP313 contain certain exposed parts that are molded from black plastic material or black powder coated finish.

2Price Book 2011A • Effective July 18, 2011 • Rev. 7/11


A Door Width

Specify exact door width. This determines what size device is supplied. If door width not specified, 3' is furnished standard.

B Stile Width

Determines which series can be used because of the dimension of the active or inactive case. In conjunction with the door width, the width of the device is also affected.

C Door Height

Rod lengths and extension rod requirements for surface vertical or concealed vertical rod devices are determined byheight.

D Undercut

Bottom rods and bottom latches or bolts for vertical rodapplications are affected by the distance between the bottom of the door and the surface to which the strike will apply; 1/4" minimum, 3/4" maximum.

E Thickness

When trim is used with a device it is affected by thickness as is the length of fasteners and cylinders.

F Stop Height

The type of strike and affect on backsets is determined by the stop (5/8" standard)

Glass Bead

In the case of touch bar devices, series 19, 24 and 25, glazing bead or trim can interfere with the device requiring shim kits with modified trim and/or device.

Fire Labels

As a component of a fire door assembly, exit devices must meet special requirements.

Other

Factors such as transom panels, sill conditions and astragals can affect exit device selection

Pairs

When devices will occur on paired door leaves, order themtogether.

Materials

Unusual door or frame materials can affect device selection such as channel iron frames, blade stop frames, hollow coredoors and mineral core doors.

Factors Affecting Exit Devices

A

C

E

B

D

F

(To finished floor)

LHR

RHR

RHR LHR

LHR LHR

Handing Diagrams

Same Egress – Double Door

Double Egress – Double Door

Single Door

Single Door

How to Order


How to Order Sequence ExampleEL F 25 V L-DANE US3 3' LHR LBR SNB WD

PrefixesCD Cylinder DoggingLD Less DoggingRX Touchbar Request to ExitDM Latchbolt and Device Monitor SwitchLM Latchbolt Status SwitchKOR Key Bypass SwitchED Electric DoggingEL Electric Latch RetractionFSA Electric Lock or Unlock Trim-Fail SafeFSE Electric Lock or Unlock Trim-Fail SecureEA Exit AlarmHWEA Hardwire Exit Alarm

RatingF Fire Exit HardwareBlank Panic Exit Hardware

Device Series19 Touch Bar Device24 Touch Bar Device, Narrow Stile25 Touch Bar DeviceXX Crossbar Device

Device TypeR Rim C Concealed Vertical rodV Surface Vertical Rod C-WDC Concealed Vertical rodM Mortise Wood Door

Trim Function (see Trim pages for all functions)

EO Exit Only K KnobDT Dummy Trim L Lever (Dane Standard)NL Night Latch TL Thumb LeverC Cylinder Trim Less Pull NL-OP Night Latch Pull by otherTP Thumbpiece KIL Key in Lever

Latch OptionDL Dead Locking

FinishUS3 US10 US26 US32 SP28US4 313AN US26D US32D SP313

Door Width 3' Standard Default4'

HandingRHR Right Hand ReverseLHR Left Hand Reverse

Less Bottom RodLBR Less Bottom RodLBR-AFL LBR w/Auxiliary Fire Pin

AccessoriesCYL Cylinder SNB Sex Bolts AMS All Machine ScrewsSK Shim Kit SLM SLM Blocking

Other Miscellaneous Door Information (see page 9 for details)HMD Hollow Metal Door SCDC Steel Channel Door Construction _ Door Label (20 min, 45 min, 90 min 1-1/2 hr)

HMF Hollow Metal Frame _ Specify other Door or Frame _ Stile WidthWD Wood Door Material information _ Frame Stop HeightWDF Wood Frame _ Door Height SGL Single DoorALD Aluminum Door _ Door Thickness PR Pair of Doors Swinging Same DirectionALF Aluminum Frame _ Door Undercut DE Double Egress Doors

Door Thickness1-3/4" Standard2-1/4" Optional

Not all options are available on all series, consult customer service.

For Special Order Product Quotes: Email: [email protected] Fax: 1-877-730-6248



Conversion Table17 Series to 24 Series 18 Series to 25 SeriesOld New Trim Old New Trim(F)17-R (F)24-R No Change (F)18-R (F)25-R See Below(F)17-V (F)24-V No Change (F)18-V (F)25-V See Below(F)17-C (F)24-C No Change (F)18-C (F)25-C See Below(F)17-C-WDC (F)24-C-WDC No Change (F)18-C-WDC (F)25-C-WDC See Below

(F)18-M (F)25-M See Below

18 Series to 25 Series TrimOld Old Trim New Old Old Trim New812L Lever Trim 510L 810TP Apollo 512TP812L-NL Lever Trim 510L-NL 810NL Apollo 512NL812L-DT Lever Trim 510L-DT 810DT Apollo 512DT812L-BE Lever Trim 510L-BE 810TP-BE Apollo 512TP-BE816L Vandal Resistant 511L 811K Knob 513K820TP Vanguard 512TP 811K-NL Knob 513K-NL820NL Vanguard 512NL 811K-DT Knob 513K-DT820DT Vanguard 512DT 811K-BE Knob 513K-BE820TP-BE Vanguard 512TP-BE 717DT Delta 717DT

814KIL Key in Lever Discontinued

17/18 Strikes to 24/25 StrikesOld New 24 Series 25 Series CommentsF490 299 X X Need 650106 retrofit kit for existing prepF490 299F X X Need 650106 retrofit kit for existing prep565 1439 X XF570 299 X X Need 650106 retrofit kit for existing prepF570 299F X X Need 650106 retrofit kit for existing prep571 1609 X X579 1606 Not recommended XNo Equivalent 499F Not offered XNo Equivalent 264 X X

P

19 Series Trim ChangesOld New Trim/Control Old New Trim/Control1953DT 920DT Trident 1910L 912L-Dane Control1955P 920NL Trident 1910L-NL 912L-NL-Dane Control1904 PULL ONLY 917DT Centron 1920L LS/LK 912L-BE-Dane Control2301BE 930EO Centron 1980L-DT 912L-DT-Dane Control2303DT 930DT Centron 1919L 912L-Quantum Control2302C 930C Centron 1919L-NL 912L-NL-Quantum Control2305P 930NL Centron 1929L LS/LK 912L-BE-Quantum Control1909P 910NL Control 1989L-DT 912L-DT-Quantum Control1906T 910TP Control 1912L 912L-Sutro Control1926T LS/LK 910TP-BE Control 1912L-NL 912L-NL-Sutro Control1908DT 910DT Control 1922L-BE 912L-BE-Sutro Control1907K 911K Control 1982L-DT 912L-DT-Sutro Control1907K-NL 911K-NL Control 2400KIL w/IC Core 914KIL-IC Key in Lever1927K LS/LK 911K-BE Control 2400KIL 914KIL-KD Key in Lever1937K-DT 911K-DT Control 2401KIL LS/LK 914KIL-BE Key in Lever1911L 912L AVALON Control 2402KIL-NL 914KIL-NL-KD Key in Lever1911L-NL 912L-NL AVALON Control1921L LS/LK 912L-BE AVALON Control1981LDT 912L-DT AVALON Control



19-R Device SeriesDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.

EXIT HARDWARERim Devices SP28(Price includes F570 Strike) Trim/Control SP313 US32D

19-R-EO - 323 584Trident Trim

19-R-DT 920DT 367 62819-R-NL 920NL 399 660

Centron Trim

19-R-EO 930EO 363 62419-R-DT 930DT 367 62819-R-NL 930NL 384 64519-R-C 930C 377 63819-R-DT 917DT 358 619

Control Trim

19-R-DT 918DT 451 81719-R-NL 918NL 451 817

19-R-DT 910DT 451 81719-R-NL 910NL 451 81719-R-TP 910TP 451 81719-R-TP-NL 910TP-NL 451 81719-R-TP-BE 910TP-BE 451 817

Knob Control

19-R-K 911K 451 81719-R-K-BE 911K-BE 451 81719-R-K-NL 911K-NL 451 81719-R-K-DT 911K-DT 451 817

Dane Lever Control

19-R-L 912L 500 85619-R-L-BE 912L-BE 500 85619-R-L-NL 912L-NL 500 85619-R-L-DT 912L-DT 500 856

Key in Lever

19-R-KIL 914-KIL-KD 536 79719-R-KIL-NL 914-KIL-NL-KD 536 79719-R-KIL-BE 914-KIL-BE 536 79719-R-KIL-IC 914-KIL-IC 585 846

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 48. For Standard and Optional Strikes, refer to page 46.For KIL functions with US32D device, trim finish is furnished SP28. Cylinders provided at no charge.Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified.Handing: 920 Series trims are handed and not field reversible. Specify handing RHR or LHR.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.Available 2/28/2011.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts:Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting.

Note: prices shown are for 3' length, for 4' length add $25.00 to list price.

●

■

●

●

●

●

■

■

▲

▲

▲

▲

●

●

●

●

●

●

✽

✽

◆

◆

◆

◆

◆

●

●

●

●

▲

✽

◆

◆



Device Series F-19-R Devices are priced 3', complete with standard trim and strikes.

Cylinders are not included in price unless noted.

FIRE EXIT HARDWARERim Devices SP28(Price includes F570 Strike) Trim/Control SP313 US32D

F-19-R-EO – 408 683Trident Trim

F-19-R-DT 920DT 452 727F-19-R-NL 920NL 484 759

Centron Trim

F-19-R-EO 930EO 448 723F-19-R-DT 930DT 452 727F-19-R-NL 930NL 469 744F-19-R-C 930C 462 737F-19-R-DT 917DT 443 718

Control Trim

F-19-R-DT 918DT 536 916F-19-R-NL 918NL 536 916

F-19-R-DT 910DT 536 916F-19-R-NL 910NL 536 916F-19-R-TP 910TP 536 916F-19-R-TP-NL 910TP-NL 536 916F-19-R-TP-BE 910TP-BE 536 916

Knob Control

F-19-R-K 911K 536 916F-19-R-K-BE 911K-BE 536 916F-19-R-K-NL 911K-NL 536 916F-19-R-K-DT 911K-DT 536 916

Dane Lever Control

F-19-R-L 912L 585 955F-19-R-L-BE 912L-BE 585 955F-19-R-L-NL 912L-NL 585 955F-19-R-L-DT 912L-DT 585 955

Key in Lever

F-19-R-KIL 914-KIL-KD 621 896F-19-R-KIL-NL 914-KIL-NL-KD 621 896F-19-R-KIL-BE 914-KIL-BE 621 896F-19-R-KIL-IC 914-KIL-IC 670 945

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 48. For Standard and Optional Strikes, refer to page 46. For KIL functions with US32D device, trim finish is furnished SP28. Cylinder provided at no charge.Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified.Handing: 920 Series trims are handed and not field reversible. Specify handing RHR or LHR.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.Available 2/28/2011.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts:Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting. SexBolts are required and added to the order for additional center case mounting when device is used with wood, composite ornon-reinforced hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 2729 List AddAll Applications 2 $14


●

■

●

●

●

●

▲

▲

▲

▲

■

■

●

●

●

●

●

●

●

●

●

●

✽

✽

◆

◆

◆

◆

◆

▲

✽

◆

◆



19-VDevice Series Devices are priced 3', complete with standard trim and strikes. Cylinders and Sex Bolts are not included in price unless noted.

EXIT HARDWARESurface Vertical Rod Devices SP28(Price includes 3788 and 2130 Strikes ) Trim/Control SP313 US32D

19-V-EO – 491 967Trident Trim

19-V-DT 920DT 535 101119-V-NL 920NL 567 1043

Centron Trim

19-V-EO 930EO 531 100719-V-DT 930DT 535 101119-V-NL 930NL 552 102819-V-C 930C 545 102119-V-DT 917DT 526 1002

Control Trim

19-V-DT 918DT 619 120019-V-NL 918NL 619 1200

19-V-DT 910DT 619 120019-V-NL 910NL 619 120019-V-TP 910TP 619 120019-V-TP-NL 910TP-NL 619 120019-V-TP-BE 910TP-BE 619 1200

Knob Control

19-V-K 911K 619 120019-V-K-BE 911K-BE 619 120019-V-K-NL 911K-NL 619 120019-V-K-DT 911K-DT 619 1200

Dane Lever Control

19-V-L 912L 668 123919-V-L-BE 912L-BE 668 123919-V-L-NL 912L-NL 668 123919-V-L-DT 912L-DT 668 1239

Key in Lever

19-V-KIL 914-KIL-KD 704 118019-V-KIL-NL 914-KIL-NL-KD 704 118019-V-KIL-BE 914-KIL-BE 704 118019-V-KIL-IC 914-KIL-IC 753 1229

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 48. For Standard and Optional Strikes, refer to page 46. For KIL functions with US32D device, trim finish is furnished SP28. Cylinders provided at no charge.For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10', see page 56 for extension rod add.Handing: 19-V Devices are handed and field reversible. Devices and handed Trim are furnished RHR when handing is not specified.Handing: 920 Series Trim are handed and not field reversible. Specify handing RHR or LHR.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.Available 2/28/2011.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts:Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting.Optional Sex Bolts are recommended for latch mounting when device is used with hollow core, composite or light gaugehollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 2729 List AddAll Applications 6 $42


■

▲✽◆

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

▲

▲

▲

▲

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

■

■

●

✽

✽

◆

◆

◆

◆

◆

◆



Device Series F-19-VDevices are priced 3', complete with standard trim and strikes.


FIRE EXIT HARDWARESurface Vertical Rod Devices SP28(Price includes 3788 and 2130 Strikes ) Trim/Control SP313 US32D

F-19-V-EO – 628 1092Trident Trim

F-19-V-DT 920DT 672 1136F-19-V-NL 920NL 704 1168

Centron Trim

F-19-V-EO 930EO 668 1132F-19-V-DT 930DT 672 1136F-19-V-NL 930NL 689 1153F-19-V-C 930C 682 1146F-19-V-DT 917DT 663 1127

Control Trim

F-19-V-DT 918DT 756 1325F-19-V-NL 918NL 756 1325

F-19-V-DT 910DT 756 1325F-19-V-NL 910NL 756 1325F-19-V-TP 910TP 756 1325F-19-V-TP-NL 910TP-NL 756 1325F-19-V-TP-BE 910TP-BE 756 1325

Knob Control

F-19-V-K 911K 756 1325F-19-V-K-BE 911K-BE 756 1325F-19-V-K-NL 911K-NL 756 1325F-19-V-K-DT 911K-DT 756 1325

Dane Lever Control

F-19-V-L 912L 805 1364F-19-V-L-BE 912L-BE 805 1364F-19-V-L-NL 912L-NL 805 1364F-19-V-L-DT 912L-DT 805 1364

Key in Lever

F-19-V-KIL 914-KIL-KD 841 1305F-19-V-KIL-NL 914-KIL-NL-KD 841 1305F-19-V-KIL-BE 914-KIL-BE 841 1305F-19-V-KIL-IC 914-KIL-IC 890 1354

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 48. For Standard and Optional Strikes, refer to page 46. For KIL functions with US32D device, trim finish is furnished SP28. Cylinders provided at no charge.For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10', see page 56 for extension rod add.Handing: F-19-V Devices are handed and field reversible. Devices and handed Trim are furnished RHR when handing is not specified.Handing: 920 Series Trim are handed and not field reversible. Specify handing RHR or LHR.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.Available 2/28/2011.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts:Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting. SexBolts are required and added to the order for additional latch case mounting when device is used with wood, composite ornon-reinforced hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 2729 List Add

All Applications 6 $42


●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

▲

▲

▲

▲

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

■

■

✽

✽

◆

◆

◆

◆

◆

■

▲✽◆

●

◆



19 Device OptionsCylinder DoggingNot for use with Fire Exit HardwarePrefix List Add

CD Cylinder Dogging available on all 19 series Panic Devices. 59LD Less Dogging available on all 19 series panic devices 26

Less Bottom RodSuffix

LBR Available with UL Fire Label at no additional charge on F-19-V devices. NCFire rated LBR devices must be ordered in pairs of Vertical Rod Devices.

For Fire Rated Devices specify one device LBR and second device LBR-AFL. Second device provided with a Fire Pin.

Device MonitoringPrefix List Add

RX Touch Bar Request to Exit Switch available on all 19 series devices. 211RX device monitoring switch can be used in combination with a second RX switch.Add $203 list.

KOR Key Override - Override device monitoring on a door by use of a keyed cylinder. 55KOR must be used in combination with a device monitoring switch.

Exit AlarmPrefix List Add

EA Exit Alarm available on all 19 series Rim Panic and Fire Devices. 387Not recommended for use with 19 Vertical Rod Panic or Fire Devices.Not available with KOR. 9 Volt battery included.

HWEA Hard-Wired Exit Alarm available on all 19 series Rim Panic and Fire Devices. 791Not recommended for use with 19 Vertical Rod Panic or Fire Devices.PS902 Power Supply required and must be used for warranty to apply.Not available with KOR. See page 20 for pricing,

HWK Hard-Wired Adapter for field installation to eliminate 9 volt battery,order part number 650305 405



Notes

EXIT HARDWARERim Devices

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US324-R-EO ― 986 1251 1047 1208 1257 1281 1257 1281 1372

986 1251 1047 1208 1257 1281 1257 1281 137224-R-NL-OP ―Delta Trim

24-R-DT 717DT 1143 1442 1238 1434 1483 1507 1414 1438 1598718DT 1289 1423 1219 1450 1499 1523 1560 1584 1614718NL 1143 1442 1238 1433 1483 1507 1414 1438 1598718C 1109 1408 1204 1380 1429 1453 1380 1404 1544718TP 1247 1598 1394 1555 1604 1628 1518 1542 1719718TP-BE 1247 1598 1394 1555 1604 1628 1518 1542 1719

710DT 1134 1464 1260 1476 1525 1549 1405 1429 1640710NL 1134 1464 1260 1476 1525 1549 1405 1429 1640710TP 1134 1464 1260 1476 1525 1549 1405 1429 1640710TP-BE 1134 1464 1260 1476 1525 1549 1405 1429 1640

711K 1134 1464 1260 1476 1525 1549 1405 1429 1640

711K-NL 1134 1464 1260 1476 1525 1549 1405 1429 1640711K-BE 1134 1464 1260 1476 1525 1549 1405 1429 1640

711K-DT 1134 1464 1260 1476 1525 1549 1405 1429 1640

712L 1279 1561 1357 1540 1589 1613 1550 1574 1704 712L-BE 1279 1561 1357 1540 1589 1613 1550 1574 1704 712L-NL 1279 1561 1357 1540 1589 1613 1550 1574 1704 712L-DT 1279 1561 1357 1540 1589 1613 1550 1574 1704

24-R-DT24-R-NL24-R-C24-R-TP24-R-TP-BE

Control Trim24-R-DT24-R-NL24-R-TP24-R-TP-BE

Knob Control24-R-K24-R-K-BE24-R-K-NL24-R-K-DT

Dane Lever Control24-R-L24-R-L-BE24-R-L-NL24-R-L-DT

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 49-50. For Standard and Optional Strikes, refer to page 46.

24 Series devices with trims furnished in SP313.Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trimAvailable until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts: Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood, composite or light gauge hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 325 Sex Bolt 425 List AddEO (exit only device) 2 4 $51Device with Trim Not Required 4 34

Device Series 24-RDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.

(Price includes 299 Strike)




12Price Book 2011A • Effective July 18, 2011 • Rev. 7/11 (2)


EXIT HARDWAR E Rim Devices

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 F-24-R-EO ― 1168 1433 1229 1390 1439 1463 1439 1463 1554

1168 1433 1229 1390 1439 1463 1439 1463 1554F-24-R-NL-OP ―Delta Trim

F-24-R-DT 717DT 1325 1624 1420 1616 1665 1689 1596 1620 1780718DT 1471 1605 1401 1632 1681 1705 1742 1766 1796718NL 1325 1624 1420 1616 1665 1689 1596 1620 1780718C 1291 1590 1386 1562 1611 1635 1562 1586 1726718TP 1429 1780 1576 1737 1786 1810 1700 1724 1901718TP-BE 1429 1780 1576 1737 1786 1810 1700 1724 1901

710DT 1316 1646 1442 1658 1707 1731 1587 1611 1822710NL 1316 1646 1442 1658 1707 1731 1587 1611 1822710TP 1316 1646 1442 1658 1707 1731 1587 1611 1822710TP-BE 1316 1646 1442 1658 1707 1731 1587 1611 1822

711K 1316 1646 1442 1658 1707 1731 1587 1611 1822711K-BE 1316 1646 1442 1658 1707 1731 1587 1611 1822711K-NL 1316 1646 1442 1658 1707 1731 1587 1611 1822711K-DT 1316 1646 1442 1658 1707 1731 1587 1611 1822

712L 1461 1743 1539 1722 1771 1795 1732 1756 1886712L-BE 1461 1743 1539 1722 1771 1795 1732 1756 1886712L-NL 1461 1743 1539 1722 1771 1795 1732 1756 1886712L-DT 1461 1743 1539 1722 1771 1795 1732 1756 1886

F-24-R-DT F-24-R-NL F-24-R-C F-24-R-TP F-24-R-TP-BE

Control Trim F-24-R-DT F-24-R-NL F-24-R-TP F-24-R-TP-BE

Knob Control F-24-R- K F-24-R-K-BE F-24-R-K-NL F-24-R-K-DT

Dane Lever Control F-24-R-L F-24-R-L-BE F-24-R-L-NL F-24-R-L-DT

REFERENCE NOTES: For Standard and Optional Trims/Controls , refer to page 49-50.For Standard and Optional Strikes , refer to page 46. 24 Series devices with trims furnished in SP313 Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trimAvailable until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts: Sex Bolts are required and added for center case mounting when device is used with wood, composite or non-reinforced hollowmetal doors. See chart below for quanties and list prices

Application Sex Bolt 325 Sex Bolt 425 List Add EO (exit only device ) 2 4 $51Device with Trim Not Required 4 34

Device Series F-24-RDevices are priced 3', complete with standard trim and strikes.


(Price includes 299F Strike)




EXIT HARDWAR E Surface Vertical Rod Devices

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 24-V-EO ― 1296 1650 1376 1587 1650 1682 1650 1682 1780

1296 1650 1376 1587 1650 1682 1650 1682 178024-V-NL-OP ―Delta Trim

24-V-DT 717DT 1453 1841 1567 1813 1876 1908 1807 1839 2006718DT 1599 1822 1548 1829 1892 1924 1953 1985 2022718NL 1453 1841 1567 1813 1876 1908 1807 1839 2006718C 1419 1807 1533 1759 1822 1854 1773 1805 1952718TP 1557 1997 1723 1934 1997 2029 1911 1943 2127718TP-BE 1557 1997 1723 1934 1997 2029 1911 1943 2127719TL 1557 1911 1637 1865 1928 1960 1911 1943 2058719TL-BE 1557 1911 1637 1865 1928 1960 1911 1943 2058719TL-NL 1557 1911 1637 1865 1928 1960 1911 1943 2058

710DT 1444 1863 1589 1855 1918 1950 1798 1830 2048710NL 1444 1863 1589 1855 1918 1950 1798 1830 2048710TP 1444 1863 1589 1855 1918 1950 1798 1830 2048710TP-BE 1444 1863 1589 1855 1918 1950 1798 1830 2048

711K 1444 1863 1589 1855 1918 1950 1798 1830 2048711K-BE 1444 1863 1589 1855 1918 1950 1798 1830 2048711K-NL 1444 1863 1589 1855 1918 1950 1798 1830 2048711K-DT 1444 1863 1589 1855 1918 1950 1798 1830 2048

712L 1589 1960 1686 1919 1982 2014 1943 1975 2112712L-BE 1589 1960 1686 1919 1982 2014 1943 1975 2112712L-NL 1589 1960 1686 1919 1982 2014 1943 1975 2112712L-DT 1589 1960 1686 1919 1982 2014 1943 1975 2112

24-V-DT 24-V-NL 24-V-C 24-V-TP 24-V-TP-BE 24-V-TL 24-V-TL-BE 24-V-TL-NL

Control Trim 24-V-DT 24-V-NL 24-V-TP 24-V-TP-BE

Knob Control24-V-K24-V-K-BE24-V-K-NL24-V-K-DT

Dane Lever Control24-V-L24-V-L-BE24-V-L-NL24-V-L-DT

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 49-50.For Standard and Optional Strikes, refer to page 46. For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10', see page 56 for extension rod add. 24 Series devices with trims furnished in SP313.Handing: 24-V devices and noted Trims are handed and field reversible. The Device and Trims are furnished RHR when handing is not specified.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trim

Sex Bolts: Optional Sex Bolts are recommended for center case and latch mounting when device is used with hollow core wood, composite or light gauge hollow metal doors. See chart below for quantities and list prices.

Latches Device Device Application Sex Bolt 42 5 Sex Bolt 42 5 Sex Bolt 32 5 List Add EO (exit only device) 6 2 2 $85Device with Trim 6 2 Not Required 68EO (exit only device) LBR 3 2 2 60Device with Trim LB R 3 2 Not Required 43

Device Series24-VDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.

(Price includes 3788 and 2130 Strikes)

Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.





FIRE EXIT HARDWAR E Surface Vertical Rod Devices

Control Trim F-24-V-EO ― 1465 1819 1545 1756 1819 1851 1819 1851 1949

1465 1819 1545 1756 1819 1851 1819 1851 1949F-24-V-NL-OP ―Delta Trim

F-24-V-DT 717DT 1622 2010 1736 1982 2045 2077 1976 2008 2175718DT 1768 1991 1717 1998 2061 2093 2122 2154 2191718NL 1622 2010 1736 1982 2045 2077 1976 2008 2175718C 1588 1976 1702 1928 1991 2023 1942 1974 2121718TP 1726 2166 1892 2103 2166 2198 2080 2112 2296718TP-BE 1726 2166 1892 2103 2166 2198 2080 2112 2296719TL 1726 2166 1892 2103 2166 2198 2080 2112 2296719TL-BE 1726 2166 1892 2103 2166 2198 2080 2112 2296719TL-NL 1726 2166 1892 2103 2166 2198 2080 2112 2296

710NL 1613 2032 1758 2024 2087 2119 1967 1999 2217710TP 1613 2032 1758 2024 2087 2119 1967 1999 2217710TP-BE 1613 2032 1758 2024 2087 2119 1967 1999 2217

710DT 1613 2032 1758 2024 2087 2119 1967 1999 2217

711K-BE 1613 2032 1758 2024 2087 2119 1967 1999 2217711K-NL 1613 2032 1758 2024 2087 2119 1967 1999 2217711K-DT 1613 2032 1758 2024 2087 2119 1967 1999 2217

711K 1613 2032 1758 2024 2087 2119 1967 1999 2217

712L-BE 1758 2129 1855 2088 2151 2183 2112 2144 2281712L-NL 1758 2129 1855 2088 2151 2183 2112 2144 2281712L-DT 1758 2129 1855 2088 2151 2183 2112 2144 2281

712L 1758 2129 1855 2088 2151 2183 2112 2144 2281

F-24-V-DT F-24-V-NL F-24-V-C F-24-V-TP F-24-V-TP-BE F-24-V-TL F-24-V-TL-BE F-24-V-TL-NL

Control Trim F-24-V-DT F-24-V-NL F-24-V-TP F-24-V-TP-BE

Knob Control F-24-V-K F-24-V-K-BE F-24-V-K-NL F-24-V-K-DT

Dane Lever Control F-24-V-L F-24-V-L-BE F-24-V-L-NL F-24-V-L-DT

REFERENCE NOTES: For Standard and Optional Trims/Controls , refer to page 49-50.For Standard and Optional Strikes , refer to page 46. For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10' see page 56 for extension rod add. 24 Series devices with trims furnished in SP313. Handing: F-24-V Devices and noted Trims are handed and field reversible. The Device and Trims are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trim Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts: One 4122 Sex Bolt is supplied standard no charge for hinge side mouting. Sex Bolts are required and added to the order forcenter case and latch mounting when device is used with wood, composite or non-reinforced hollow metal doors.See chart below for quantities and list prices.

Latches Device DeviceApplication Sex Bolt 425 Sex Bolt 425 Sex Bolt 325 List AddEO (exit only device) 6 2 2 $85Device with Trim 6 2 Not Required 68EO (exit only device) LBR 3 2 2 60Device with Trim LBR 3 2 Not Required 43



(Price includes 3788 and 2130 Strikes) US28 US32D 313AN US26D US26 US32 US10 US4 US3



EXIT HARDWARE Concealed Vertical Rod Devices

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US324-C-EO ― 1361 1701 1445 1667 1734 1769 1734 1769 1871

Delta Trim 24-C-DT 717DT 1518 1892 1636 1893 1960 1995 1891 1926 2097

718DT 1664 1873 1617 1909 1976 2011 2037 2072 2113718NL 1518 1892 1636 1893 1960 1995 1891 1926 2097718C 1484 1858 1602 1839 1906 1941 1857 1892 2043718TP 1622 2048 1792 2014 2081 2116 1995 2030 2218718TP-BE 1622 2048 1792 2014 2081 2116 1995 2030 2218719TL 1622 2048 1792 2014 2081 2116 1995 2030 2218719TL-BE 1622 1962 1706 1945 2012 2047 1995 2030 2149719TL-NL 1622 1962 1706 1945 2012 2047 1995 2030 2149719TLP 1622 1962 1706 1960 2027 2062 1995 2030 2164719LTP-BE 1622 1962 1706 1960 2027 2062 1995 2030 2164719TLP-NL 1622 1962 1706 1960 2027 2062 1995 2030 2164

711K 1509 1914 1658 1935 2002 2037 1882 1917 2139711K-BE 1509 1914 1658 1935 2002 2037 1882 1917 2139711K-NL 1509 1914 1658 1935 2002 2037 1882 1917 2139711K-DT 1509 1914 1658 1935 2002 2037 1882 1917 2139

712L 1654 2011 1755 1999 2066 2101 2027 2062 2203712L-BE 1654 2011 1755 1999 2066 2101 2027 2062 2203712L-NL 1654 2011 1755 1999 2066 2101 2027 2062 2203712L-DT 1654 2011 1755 1999 2066 2101 2027 2062 2203

24-C-DT 24-C-NL 24-C-C 24-C-TP 24-C-TP-BE 24-C-TL 24-C-TL-BE 24-C-TL-NL 24-C-TLP 24-C-TLP-BE 24-C-TLP-NL

Knob Control 24-C-K 24-C-K-BE 24-C-K-NL 24-C-K-DT

Dane Lever Control 24-C-L 24-C-L-BE 24-C-L-NL 24-C-L-DT

REFERENCE NOTES: For Standard and Optional Trims/Controls , refer to page 49-50.For Standard and Optional Strikes , refer to page 46. For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10' see page 56 for extension rod add. 24 Series devices with trims furnished in SP313. Handing: All 24-C Devices and Trims are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts: Optional Sex Bolts are recommended for center case when device is used with light gauge hollow metal doors.See chart below for quantities and list prices.

Application Sex Bolt 425 Sex Bolt 325 List AddEO (exit only device) 2 2 $34Device with Trim 2 Not Required 17

Device Series24-CDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.

(Price includes Strikes 4188 and 2130)





FIRE EXIT HARDWAR E Concealed Vertical Rod Devices

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 F-24-C-EO ― 1530 1870 1614 1836 1903 1938 1903 1938 2040

Delta Trim F-24-C-DT 717DT 1687 2061 1805 2062 2129 2164 2060 2095 2266


711K 1678 2083 1827 2104 2171 2206 2051 2086 2308711K-BE 1678 2083 1827 2104 2171 2206 2051 2086 2308711K-NL 1678 2083 1827 2104 2171 2206 2051 2086 2308711K-DT 1678 2083 1827 2104 2171 2206 2051 2086 2308

712L 1823 2180 1924 2168 2235 2270 2196 2231 2372712L-BE 1823 2180 1924 2168 2235 2270 2196 2231 2372712L-NL 1823 2180 1924 2168 2235 2270 2196 2231 2372712L-DT 1823 2180 1924 2168 2235 2270 2196 2231 2372

F-24-C-DT F-24-C-NL F-24-C-C F-24-C-TP F-24-C-TP-BE F-24-C-TL F-24-C-TL-BE F-24-C-TL-NL F-24-C-TLP F-24-C-TLP-BE F-24-C-TLP-NL

Knob Control F-24-C- K F-24-C-K-BE F-24-C-K-NL F-24-C-K-DT

Dane Lever Control F-24-C-L F-24-C-L-BE F-24-C-L-NL F-24-C-L-DT

REFERENCE NOTES: For Standard and Optional Trims/Controls , refer to page 49-50.For Standard and Optional Strikes , refer to page 46. For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10' see page 56 for extension rod add. 24 Series devices with trims furnished in SP313. Handing: All F-24-C Devices and Trims are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts: Sex Bolts are required and added to the order for center case mounting when device is used with non-reinforced hollow metal doors.See chart below for quantities and list prices.

Application Sex Bolt 425 Sex Bolt 325 List AddEO (exit only device) 2 2 $34Device with Trim 2 Not Required 17

Devices Series F-24-CDevices are priced 3', complete with standard trim and strikes.



17 Price Book 2011A • Effective July 18, 2011 • Rev. 7/11 (2)


EXIT HARDWAREWood Door Concealed Vertical Rod Devices

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US324-CWDC-EO ― 1660 2076 1764 2033 2116 2158 2116 2158 2282

Delta Trim24-CWDC-DT 717DT 1817 2267 1955 2259 2342 2384 2273 2315 2508


711K 1808 2289 1977 2301 2384 2426 2264 2306 2550711K-BE 1808 2289 1977 2301 2384 2426 2264 2306 2550711K-NL 1808 2289 1977 2301 2384 2426 2264 2306 2550711K-DT 1808 2289 1977 2301 2384 2426 2264 2306 2550

712L 1953 2386 2074 2365 2448 2490 2409 2451 2614712L-BE 1953 2386 2074 2365 2448 2490 2409 2451 2614712L-NL 1953 2386 2074 2365 2448 2490 2409 2451 2614712L-DT 1953 2386 2074 2365 2448 2490 2409 2451 2614

24-CWDC-DT24-CWDC-NL24-CWDC-C24-CWDC-TP24-CWDC-TP-BE24-CWDC-TL24-CWDC-TL-BE24-CWDC-TL-NL24-CWDC-TLP24-CWDC-TLP-BE24-CWDC-TLP-NL

Knob Control24-CWDC-K24-CWDC-K-BE24-CWDC-K-NL24-CWDC-K-DT

Dane Lever Control24-CWDC-L24-CWDC-L-BE24-CWDC-L-NL24-CWDC-L-DT

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 49-50. For Standard and Optional Strikes, refer to page 46. For door heights over 7' up to 8',extension rod is furnished at no additional charge. For door heights 8' up to 10' see page 56 for extension rod add. 24 Series devices with trims furnished in SP313.Handing: All 24-CWDC Devices and Trims are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified.The Dane lever is furnished standard. Optional lever designs, Avalon, Quantum and Sutro are available at no additional charge.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts: Optional Sex Bolts are recommended for center case when device is used with hollow core or composite doors.See chart below for quantites and list prices.

Latches Device DeviceApplication Sex Bolt 325 Sex Bolt 425 Sex Bolt 325 List AddEO (exit only device) 4 2 2 $68Device with Trim 4 2 Not Required 51

Device Series24-CWDCDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.





FIRE EXIT HARDWAREWood Door Concealed Vertical Rod Devices

Control Trim US28 313AN US4 US10B US32D US26D US3 US26 US32F-24-CWDC-EO ― 1829 1933 2327 2285 2245 2202 2451 2285 2327

Delta Trim F-24-CWDC-DT 717DT 1986 2124 2484 2442 2436 2428 2677 2511 2553


711K 1977 2146 2475 2433 2458 2470 2719 2553 2595711K-BE 1977 2146 2475 2433 2458 2470 2719 2553 2595711K-NL 1977 2146 2475 2433 2458 2470 2719 2553 2595711K-DT 1977 2146 2475 2433 2458 2470 2719 2553 2595

712L 2122 2243 2620 2578 2555 2534 2783 2617 2659712L-BE 2122 2243 2620 2578 2555 2534 2783 2617 2659712L-NL 2122 2243 2620 2578 2555 2534 2783 2617 2659712L-DT 2122 2243 2620 2578 2555 2534 2783 2617 2659

F-24-CWDC-DT F-24-CWDC-NL F-24-CWDC-C F-24-CWDC-TP F-24-CWDC-TP-BE F-24-CWDC-TL F-24-CWDC-TL-BE F-24-CWDC-TL-NL F-24-CWDC-TLP F-24-CWDC-TLP-BE F-24-CWDC-TLP-NL

Knob Control F-24-CWDC- K F-24-CWDC-K-BE F-24-CWDC-K-NL F-24-CWDC-K-DT

Dane Lever Control F-24-CWDC-L F-24-CWDC-L-BE F-24-CWDC-L-NL F-24-CWDC-L-DT

REFERENCE NOTES: For Standard and Optional Trims/Controls , refer to page 49-50. For Standard and Optional Strikes , refer to page 46. For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights 8' up to 10', see page 56 for extension rod add.

24 Series devices with trims furnished in SP313. Handing: All F-24-CWDC Devices and Trims are handed and field reversible. The Device and Trim are furnished RHR when hand is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts: 90 minute doors for WDC fire devices assume a Steel Channel Door Construction (SCDC). Sex Bolts are required and added to the order for center case mounting when device is used with hollow core or composite doors.See chart below for quantities and list prices.

Latches Device DeviceSex Bolt 325 Sex Bolt 425 Sex Bolt 325 List Add

EO (exit only device) - SCDC - 2 2 $34Device x Trim - SCDC - 2 not required 17

Application

Device Series F-24-CWDCDevices are priced 3', complete with standard trim and strikes.



Note: prices shown are for 3' length, for 4' length add $25.00 to list price .

24 Device Options

Cylinder DoggingNot for use with Fire Exit Hardware

Prefix List Add

CD Cylinder Dogging available on all 24 series Panic Devices 59LD Less Dogging available on all 24 series Panic Devices 26

Less Bottom RodSuffix List Add

LBR Available with UL Fire Label at no additional charge on F-24-V and F-24-C devices. NCFire rated LBR devices must be ordered in pairs of Vertical Rod Devices.For Fire Rated Devices specify on device LBR and second device LBR-AFL.Second device provided with a Fire Pin.WDC Fire LBR devices are for 20 minute rating only. Consult Wood Door manufacturerfor UL Fire Ratings greater than 20 minutes.

DeadlockingPrefix List Add

DL Deadlocking Feature for Rim Devices only 74Deadlocking is supplied standard on Vertical and Concealed Vertical Devices.

Electric Dogging / Electric Latch RetractionPrefix List Add

ED Electric Dogging - Available on all 24 series Panic and Fire Devices 387Electrical Dogging cannot be used in combination with CD, EA, HWEA, EL or KOR options.

EL Electric Latch Retraction - Available on all 24 series Panic and Fire Devices 526Electrical Latch cannot be used in combination with CD, ED, EA, HWEA or KOR options.


RX Touch Bar Request to Exit Switch available on all 24 series devices 211RX dogging monitoring switch can be used in combination with a secondRX, DM or LM switch. Add $203 list.

DM Touch Bar and Latch Bolt Monitoring Switch available on most 24 device series. 211Not available on F-24-R devices, with dual DM switches or in combination with LM switch.Device monitoring switches can be used in combination with a RX switch. Add $203 list.

LM Latch Bolt Monitoring Switch available on most 24 device series. 211Not available on F-24-R devices, with dual LM switches or in combination with DM switch.LM device monitoring switch can be used in combination with a RX switch. Add $203 list.

KOR Key Override-Override device monitoring on a door by use of a keyed cylinder. 55KOR must be used in combination with a device monitoring switch.


EA Exit Alarm For Surface Vertical Devices, specify device with DM (Device Monitor Switch). 387Add $203 list. 9 Volt battery included. Not available with KOR.

HWEA Hard-Wired Exit Alarm available on 24-R and 24-V Panic and Fire Devices. 791For Surface Vertical Devices, specify device with DM (Device Monitor Switch). Add $203 list.9 Volt battery included. Not available with KOR.PS902 Power Supply required and must be used for warranty to apply. See page 20 for pricing.

HWK Hard-Wired Adapter for field installation to eliminate 9 volt battery. 405Order part number 650305.





Electrical Accessories 24Delayed Exit SystemDesigned to meet NFPA 101 “Special Locking Arrangement” applicationsA complete delayed egress system requires several components not included with controller.

Consult catalog for details.

PS902 can be supplied with one option board.PS914 can have a combinations of one or two.* For field installation, use model number. Example: 900-2RS.

Power Supply Overview Installation has been simplified in the PS900 series of Power Supplies by utilizing a flat mounting design and polarized lockingconnectors for option boards. This new design eliminates the need for racks and side connectors. The flat mounting of theoption boards also provides for easier access to the terminal blocks for connection of electrified devices (such as electrifiedpanic devices, strikes, card readers, etc). Common to the line of PS900 Series power supplies is a constant output rating at both12v and 24v settings, universal 120 VAC to 240 VAC input, and polarized option board connectors. New fire alarm interfaceboard mounting allows outputs to be configured as switched (power cut) or unswitched (power continues) when signal provided.

Power SuppliesAll PS900 Series of power supplies and option boards have been tested and certified to meet UL294.Model No. Description List Price

PS902 2 AMP 218PS902BBK 2 AMP With Battery Backup 426PS902FA 2 AMP With Fire Alarm 270

PS914 4 AMP High Inrush 617PS914BBK 4 AMP High Inrush With Battery Backup 825PS914FA 4 AMP High Inrush With Fire Alarm. Must specify board to have FA. 669

List Add

BAA "Buy America Act" compliant power supply option 33will be labeled as "Assembled in the U.S.A. with U.S. and foreign materials"

When specifying PS914 power supply for use with "EL" Electric Latch Retraction devices, the 2RS or 2Q board is furnishedwhen board option not specified.

Option BoardsModel No. Suffix Description Part # List Price

900-2RS x2RS 2 Relay Output (PS914 ONLY) 44489896-00 151900-2Q x2Q 2 Relay Output for QEL 44489904-00 177900-4R x4R 4 Relay Output 44489912-00 146900-4RL x4RL 4 Relay Output w/Logic 44489920-00 399900-8P x8P 8 PTC Output 44489938-00 52900-8F x8F 8 Fused Output 44489946-00 52900-BBK Battery Backup Board and Batteries 44489961-00 208900-BB Battery Backup Board Only 44489953-00 104900-BAT Batteries Only (qty 2) 44487155-00 104

Model No. Description List Price

DE5101 Logic Controller *15 Second Delay furnished standard 815*Over 15 second delay requires a letter of approval from authority having local jurisdiction. Fax Letter in with Sales Order.Order cannot be processed without the letter.

Electric Power TransfersModel No. Description SP28 SP313 Wt.lbs./oz.

EPT 2 Two 18 gauge wires 459 459 2.5EPT 10 Ten 24 gauge wires 486 486 2.5



EXIT HARDWARERim Devices(Price includes 299 Strike) Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3

25-R-EO ― 846 1057 898 1036 1078 1099 1078 1099 1213

846 1057 898 1036 1078 1099 1078 1099 121325-R-NL-OP ―Lever - Dane

25-R-L 510L 1156 1420 1208 1399 1448 1469 1388 1409 1583510L-BE 1156 1420 1208 1399 1448 1469 1388 1409 1583510L-NL 1095 1348 1147 1327 1374 1395 1327 1348 1509510L-DT 1095 1348 1147 1327 1374 1395 1327 1348 1509

511L 1209 1473 1261 1452 1502 1523 1441 1462 1637

512TP 1124 1362 1176 1341 1436 1457 1356 1377 1571512TP-BE 1124 1362 1176 1341 1436 1457 1356 1377 1571512-NL 1069 1301 1121 1280 1365 1386 1301 1322 1500

513K 1079 1331 1131 1310 1396 1417 1311 1332 1531513K-BE 1079 1331 1131 1310 1396 1417 1311 1332 1531513K-NL 1079 1331 1131 1310 1396 1417 1311 1332 1531513K-DT 1079 1331 1131 1310 1396 1417 1311 1332 1531

717DT 1003 1248 1089 1262 1304 1325 1235 1256 1439512DT 1033 1246 1085 1225 1365 1386 1265 1286 1500

25-R-L-BE25-R-L-NL25-R-L-DT

VR Lever25-R-L

Thumbpiece25-R-TP25-R-TP-BE25-R-NL

Knob25-R-K25-R-K-BE25-R-K-NL25-R-K-DT

DT Pull25-R-DT25-R-DT

REFERENCE NOTES:For Standard and Optional Strikes, refer to page 46.

25 Series devices with trims furnished in SP313.Handing: 25-R Device is non-handed. Lever trims and 717DT are handed but field reversible. Trims are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trim

Sex Bolts: Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood, composite or light gauge hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 425 List Add

EO (exit only device) 8 $68Device x Trim 4 34

Device Series25-R

Devices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.

Trim





FIRE EXIT HARDWARE Rim Devices (Price includes 299F Strike for single door applications only. For double door applications, specify 499F Strike and add $75 to list prices below)

Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 F-25-R-EO ― 1028 1239 1080 1218 1260 1281 1260 1281 1395

1028 1239 1080 1218 1260 1281 1260 1281 1395F-25-R-NL-OP ―Lever - Dane

F-25-R-L 510L 1338 1602 1390 1581 1630 1651 1570 1591 1765510L-BE 1338 1602 1390 1581 1630 1651 1570 1591 1765510L-NL 1277 1530 1329 1509 1556 1577 1509 1530 1691510L-DT 1277 1530 1329 1509 1556 1577 1509 1530 1691

511L 1391 1655 1443 1634 1684 1705 1623 1644 1819

512TP 1306 1544 1358 1523 1618 1639 1538 1559 1753512TP-BE 1306 1544 1358 1523 1618 1639 1538 1559 1753512-NL 1303 1483 1303 1462 1547 1568 1483 1504 1682

513K 1261 1513 1313 1492 1578 1599 1493 1514 1713513K-BE 1261 1513 1313 1492 1578 1599 1493 1514 1713513K-NL 1261 1513 1313 1492 1578 1599 1493 1514 1713513K-DT 1261 1513 1313 1492 1578 1599 1493 1514 1713

717DT 1185 1430 1271 1444 1486 1507 1417 1438 1621512DT 1215 1428 1267 1407 1547 1568 1447 1468 1682

F-25-R-L-BE F-25-R-L-NL F-25-R-L-DT

VR Lever F-25-R-L

Thumbpiece F-25-R-TP F-25-R-TP-BE F-25-R-NL

Knob F-25-R-K F-25-R-K-BE F-25-R-K-NL F-25-R-K-DT

DT Pull F-25-R-DT F-25-R-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.25 Series devices with trims furnished in SP313.

Handing: F-25-R Device is non-handed. Lever trims and 717DT are handed but field reversible. Trims are furnished RHR when handing is not specified.

The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trim

Sex Bolts: Sex Bolts are required and added to the order for center case mounting when device is used with wood, composite or non-reinforced hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 425 List Add EO (exit only device) 8 $68Device x Trim 4 34

Device Series F-25-RDevices are priced 3', complete with standard trim and strikes.


Trim



EXIT HARDWARESurface Vertical Rod Devices(Price includes 3788 & 2130 Strikes ) Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3

25-V-EO ― 1198 1506 1273 1467 1528 1557 1528 1557 1647

1198 1506 1273 1467 1528 1557 1528 1557 164725-V-NL-OP ―Lever - Dane

25-V-L 510L 1508 1869 1583 1830 1898 1927 1838 1867 2017510L-BE 1508 1869 1583 1830 1898 1927 1838 1867 2017510L-NL 1447 1797 1522 1758 1824 1853 1777 1806 1943510L-DT 1447 1797 1522 1758 1824 1853 1777 1806 1943

511L 1561 1922 1636 1883 1952 1981 1891 1920 2071

512TP 1476 1811 1551 1772 1886 1915 1806 1835 2005512TP-BE 1476 1811 1551 1772 1886 1915 1806 1835 2005512-NL 1421 1750 1496 1711 1815 1844 1751 1780 1934

513K 1431 1780 1506 1741 1846 1875 1761 1790 1965513K-BE 1431 1780 1506 1741 1846 1875 1761 1790 1965513K-NL 1431 1780 1506 1741 1846 1875 1761 1790 1965513K-DT 1431 1780 1506 1741 1846 1875 1761 1790 1965

717DT 1355 1697 1464 1693 1754 1783 1685 1714 1873512DT 1385 1695 1460 1656 1815 1844 1715 1744 1934

25-V-L-BE25-V-L-NL25-V-L-DT

VR Lever25-V-L

Thumbpiece25-V-TP25-V-TP-BE25-V-NL

Knob25-V-K25-V-K-BE25-V-K-NL25-V-K-DT

DT Pull25-V-DT25-V-DT

REFERENCE NOTES:For Standard and Optional Strikes, refer to page 46.For door heights over 7' to 8', extension rod is furnished at no extra charge. For door heights over 8' to 10', see page 56 for extension rod add.

25 Series devices with trims furnished in SP313.Handing: 25-V Device is handed but field reversible. Lever trims and 717DT are handed but field reversible. The device and trims are furnished RHR when handing is not specified.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trim

Sex Bolts: Optional Sex Bolts are recommended for center case and latch mounting when device is used with hollow core wood, composite or light gauge hollow metal doors. See chart below for quantities and list prices.

Latches DeviceApplication Sex Bolt 425 Sex Bolt 425 List AddEO (exit only device) 6 6 $96Device x Trim 6 2 64EO (exit only device) LBR 3 6 72Device x Trim LBR 3 2 40

Device Series25-VDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.





FIRE EXIT HARDWAR E Surface Vertical Rod Devices (Price includes 3788 & 2130 Strikes ) Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3

F-25-V-EO ― 1418 1726 1493 1687 1748 1777 1748 1777 1867

1418 1726 1493 1687 1748 1777 1748 1777 1867F-25-V-NL-OP ―Lever - Dane

F-25-V-L 510L 1728 2089 1803 2050 2118 2147 2058 2087 2237510L-BE 1728 2089 1803 2050 2118 2147 2058 2087 2237510L-NL 1667 2017 1742 1978 2044 2073 1997 2026 2163510L-DT 1667 2017 1742 1978 2044 2073 1997 2026 2163

511L 1781 2142 1856 2103 2172 2201 2111 2140 2291

512TP 1696 2031 1771 1992 2106 2135 2026 2055 2225512TP-BE 1696 2031 1771 1992 2106 2135 2026 2055 2225512-NL 1641 1970 1716 1931 2035 2064 1971 2000 2154

513K 1651 2000 1726 1961 2066 2095 1981 2010 2185513K-BE 1651 2000 1726 1961 2066 2095 1981 2010 2185513K-NL 1651 2000 1726 1961 2066 2095 1981 2010 2185513K-DT 1651 2000 1726 1961 2066 2095 1981 2010 2185

717DT 1575 1917 1684 1913 1974 2003 1905 1934 2093512DT 1605 1915 1680 1876 2035 2064 1935 1964 2154

F-25-V-L-BE F-25-V-L-NL F-25-V-L-DT

VR Lever F-25-V-L

Thumbpiece F-25-V-TP F-25-V-TP-BE F-25-V-NL

Knob F-25-V-K F-25-V-K-BE F-25-V-K-NL F-25-V-K-DT

DT Pull F-25-V-DT F-25-V-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.For door heights over 7' up to 8', extension rod is furnished at no extra charge. For door heights over 8' up to 10', see page 56 for extension rod add.25 Series devices with trims furnished in SP313. Handing: F-25-V Devices, Lever trims and 717DT trim are handed and field reversible. The Device and Trims are furnished RHR when handing is not specified.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trim

Sex Bolts:Sex Bolts are required and added to the order for center case mounting and latch mounting when device is used with wood, compositeor non-reinforced hollow metal doors. See chart below for quantities and list prices.

Latches DeviceApplication Sex Bolt 425 Sex Bolt 425 List AddEO (exit only device) 6 6 $102Device x Trim 6 2 68EO (exit only device) LBR 3 6 77

43Device x Trim LBR 3 2





EXIT HARDWAR E Mortise Lock Devices (Price includes 1279 Strike) Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3

25-M-EO ― 1098 1371 1166 1344 1399 1426 1400 1427 1508

1098 1371 1166 1344 1399 1426 1400 1427 150825-M-NL-OP ―Lever - Dane

25-M-L 510L 1408 1734 1476 1707 1769 1796 1710 1737 1878510L-BE 1408 1734 1476 1707 1769 1796 1710 1737 1878510L-NL 1347 1662 1415 1635 1695 1722 1649 1676 1804510L-DT 1347 1662 1415 1635 1695 1722 1649 1676 1804

512TP 1376 1676 1444 1649 1757 1784 1678 1705 1866512TP-BE 1376 1676 1444 1649 1757 1784 1678 1705 1866512-NL 1321 1615 1389 1588 1686 1713 1623 1650 1795

513K 1331 1645 1399 1618 1717 1744 1633 1660 1826513K-BE 1331 1645 1399 1618 1717 1744 1633 1660 1826513K-NL 1331 1645 1399 1618 1717 1744 1633 1660 1826513K-DT 1331 1645 1399 1618 1717 1744 1633 1660 1826

717DT 1255 1357 1570 1569 1625 1652 1557 1584 1734512DT 1285 1560 1353 1533 1686 1713 1587 1614 1795

511L 1461 1787 1529 1760 1823 1850 1763 1790 1932

25-M-L-BE 25-M-L-NL 25-M-L-DT

VR Lever 25-M-L

Thumbpiece 25-M-TP 25-M-TP-BE 25-M-NL

Knob 25-M-K 25-M-K-BE 25-M-K-NL 25-M-K-DT

DT Pull 25-M-DT 25-M-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.25 Series devices with trims furnished in SP313. Handing: The 25-M Device is handed but not field reversible. Specify handing RHR or LHR. Lever Trim and 717DT are handed and field reversible.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge Supplied as NL less trim

Sex Bolts: Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood composite or light gauge hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 425 List AddEO (exit only device ) 6 Device x Trim 2 17

Device Series25-MDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.

$51





FIRE EXIT HARDWARE Mortise Lock Devices (Price includes 1279 Strike) Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3

F-25-M-EO ― 1267 1540 1335 1513 1568 1595 1569 1596 1677

1267 1540 1335 1513 1568 1595 1569 1596 1677F-25-M-NL-OP ―Lever - Dane

F-25-M-L 510L 1577 1903 1645 1876 1938 1965 1879 1906 2047510L-BE 1577 1903 1645 1876 1938 1965 1879 1906 2047510L-NL 1516 1831 1584 1804 1864 1891 1818 1845 1973510L-DT 1516 1831 1584 1804 1864 1891 1818 1845 1973

511L 1630 1956 1698 1929 1992 2019 1932 1959 2101

512TP 1545 1845 1613 1818 1926 1953 1847 1874 2035512TP-BE 1545 1845 1613 1818 1926 1953 1847 1874 2035512-NL 1490 1784 1558 1757 1855 1882 1792 1819 1964

513K 1500 1814 1568 1787 1886 1913 1802 1829 1995513K-BE 1500 1814 1568 1787 1886 1913 1802 1829 1995513K-NL 1500 1814 1568 1787 1886 1913 1802 1829 1995513K-DT 1500 1814 1568 1787 1886 1913 1802 1829 1995

717DT 1424 1731 1526 1739 1794 1821 1726 1753 1903512DT 1454 1729 1522 1702 1855 1882 1756 1783 1964

F-25-M-L-BE F-25-M-L-NL F-25-M-L-DT

VR Lever F-25-M-L

Thumbpiece F-25-M-TP F-25-M-TP-BE F-25-M-NL

Knob F-25-M-K F-25-M-K-BE F-25-M-K-NL F-25-M-K-DT

DT Pull F-25-M-DT F-25-M-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.

25 Series devices with trims furnished in SP313. Handing: The F-25-M device is handed but not field reversible. Specify hand RHR and LHR. Lever Trim and 717DT are handed and field reversible. The Dane lever is furnished standard. Optional lever desi gns Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trim

S ex B o lt s: Optional Sex Bolts are required for center case mountin g when device is used with hollow core wood, composite or li g ht g au g e hollow metal doors. See chart below for quantities and list prices.

Applicatio n Sex Bolt 425 List Add EO ( exit onl y device ) 6 $51Device x Trim 2 17

Device Series F-25-MDevices are priced 3', complete with standard trim and strikes.




EXIT HARDWARE Concealed Vertical Rod Devices

Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 25-C-EO ― 1228 1566 1305 1506 1566 1597 1566 1597 1689

Lever - Dane 25-C-L 510L 1538 1929 1615 1869 1936 1967 1876 1907 2059

510L-BE 1538 1929 1615 1869 1936 1967 1876 1907 2059510L-NL 1477 1857 1554 1797 1862 1893 1815 1846 1985510L-DT 1477 1857 1554 1797 1862 1893 1815 1846 1985

512TP 1506 1871 1583 1811 1924 1955 1844 1875 2047512TP-BE 1506 1871 1583 1811 1924 1955 1844 1875 2047512-NL 1451 1810 1528 1750 1853 1884 1789 1820 1976

513K 1461 1840 1538 1780 1884 1915 1799 1830 2007513K-BE 1461 1840 1538 1780 1884 1915 1799 1830 2007513K-NL 1461 1840 1538 1780 1884 1915 1799 1830 2007513K-DT 1461 1840 1538 1780 1884 1915 1799 1830 2007

717DT 1385 1757 1496 1732 1792 1823 1723 1754 1915512DT 1415 1755 1492 1695 1853 1884 1753 1784 1976

718C 1351 1723 1462 1678 1738 1769 1689 1720 1861

511L 1591 1982 1668 1922 1990 2021 1929 1960 2113

25-C-L-BE 25-C-L-NL 25-C-L-DT

VR Lever 25-C-L

Thumbpiece 25-C-TP 25-C-TP-BE 25-C-NL

Knob 25-C-K 25-C-K-BE 25-C-K-NL 25-C-K-DT

DT Pull 25-C-DT 25-C-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.For door heights over 7' to 8', extension rod is furnished at no additional charge, For door heights 8' up to 10', see page 56 for extension rod add. 25 Series devices with trims furnished in SP313. Handing: 25-C Device, Lever Trim and 717DT are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.g

Sex Bolts: Optional Sex Bolts are recommended for center case mounting when device is used with light gauge hollow metal doors. See chart below for quantities and list prices.

Applicatio n Sex Bolt 425 List Add EO ( exit onl y device ) 6 $51Device x Trim 2 17

(Price includes 4188 and 2130 Strikes )

Device Series25-CDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.

25-C-C

Delta Trim





F-25-C-C

FIRE EXIT HARDWAR E Concealed Vertical Rod Devices

Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 F-25-C-EO ― 1397 1735 1474 1675 1735 1766 1735 1766 1858

Lever - Dane F-25-C-L 510L 1707 2098 1784 2038 2105 2136 2045 2076 2228

510L-BE 1707 2098 1784 2038 2105 2136 2045 2076 2228510L-NL 1646 2026 1723 1966 2031 2062 1984 2015 2154510L-DT 1646 2026 1723 1966 2031 2062 1984 2015 2154

511L 1760 2151 1837 2091 2159 2190 2098 2129 2282

512TP 1675 2040 1752 1980 2093 2124 2013 2044 2216512TP-BE 1675 2040 1752 1980 2093 2124 2013 2044 2216512-NL 1620 1979 1697 1919 2022 2053 1958 1989 2145

513K 1630 2009 1707 1949 2053 2084 1968 1999 2176513K-BE 1630 2009 1707 1949 2053 2084 1968 1999 2176513K-NL 1630 2009 1707 1949 2053 2084 1968 1999 2176513K-DT 1630 2009 1707 1949 2053 2084 1968 1999 2176

717DT 1554 1926 1665 1901 1961 1992 1892 1923 2084512DT 1584 1924 1661 1864 2022 2053 1922 1953 2145

718C 1520 1892 1631 1847 1907 1938 1858 1889 2030

F-25-C-L-BE F-25-C-L-NL F-25-C-L-DT

VR Lever F-25-C-L

Thumbpiece F-25-C-TP F-25-C-TP-BE F-25-C-NL

Knob F-25-C-K F-25-C-K-BE F-25-C-K-NL F-25-C-K-DT

DT Pull F-25-C-DT F-25-C-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10', see page 56 for extension rod add. 25 Series devices with trims furnished in SP313. Handing: F-25-C Device, Lever Trim and 717DT are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.

Sex Bolts: Optional Sex Bolts are required for center case mounting when device is used with non-reinforced hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 425 List Add EO (exit only device ) 6 $51 Device x Trim 2 17

Device Series F-25-CDevices are priced 3', complete with standard trim and strikes.



Delta Trim



EXIT HARDWAR E Wood Door Concealed Vertical Rod

Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 25-CWDC-EO ― 1392 1741 1481 1706 1776 1810 1776 1810 1915

Lever - Dane 25-CWDC-L 510L 1702 2104 1791 2069 2146 2180 2086 2120 2285

510L-BE 1702 2104 1791 2069 2146 2180 2086 2120 2285

511L 1755 2157 1844 2122 2200 2234 2139 2173 2339

512TP 1670 2046 1759 2011 2134 2168 2054 2088 2273512TP-BE 1670 2046 1759 2011 2134 2168 2054 2088 2273512-NL 1615 1985 1704 1950 2063 2097 1999 2033 2202

513K 1625 2015 1714 1980 2094 2128 2009 2043 2233513K-BE 1625 2015 1714 1980 2094 2128 2009 2043 2233513K-NL 1625 2015 1714 1980 2094 2128 2009 2043 2233513K-DT 1625 2015 1714 1980 2094 2128 2009 2043 2233

717DT 1549 1932 1672 1932 2002 2036 1933 1967 2141512DT 1579 1930 1668 1895 2063 2097 1963 1997 2202

510L-NL 1641 2032 1730 1997 2072 2106 2025 2059 2211510L-DT 1641 2032 1730 1997 2072 2106 2025 2059 2211

25-CWDC-L-BE 25-CWDC-L-NL 25-CWDC-L-DT

VR Lever 25-CWDC-L

Thumbpiece 25-CWDC-TP 25-CWDC-TP-BE 25-CWDC-NL

Knob 25-CWDC-K 25-CWDC-K-BE 25-CWDC-K-NL 25-CWDC-K-DT

DT Pull 25-CWDC-DT 25-CWDC-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10', see page 56 for extension rod add. 25 Series devices with trims furnished in SP313. Handing: 25-CWDC Device, Lever Trim and 717DT are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge..

Sex Bolts: Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood or composite doors. See chart below for quantities and list prices.

Latches Device Sex Bolt 32 5 S ex Bolt 42 List Add

EO (exit only device) 4 6 $85Device x Trim 4 2 51

Device Series25-CWDCDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.


Application





FIRE EXIT HARDWAR E Wood Door Concealed Vertical Rod

Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 F-25-CWDC-EO ― 1561 1910 1650 1875 1945 1979 1945 1979 2084

Lever - Dane F-25-CWDC-L 510L 1871 2273 1960 2238 2315 2349 2255 2289 2454

510L-BE 1871 2273 1960 2238 2315 2349 2255 2289 2454510L-NL 1810 2201 1899 2166 2241 2275 2194 2228 2380510L-DT 1810 2201 1899 2166 2241 2275 2194 2228 2380

513K 1794 2184 1883 2149 2263 2297 2178 2212 2402513K-BE 1794 2184 1883 2149 2263 2297 2178 2212 2402513K-NL 1794 2184 1883 2149 2263 2297 2178 2212 2402513K-DT 1794 2184 1883 2149 2263 2297 2178 2212 2402

512TP 1839 2215 1928 2180 2303 2337 2223 2257 2442512TP-BE 1839 2215 1928 2180 2303 2337 2223 2257 2442512-NL 1784 2154 1873 2119 2232 2266 2168 2202 2371

717DT 1718 2101 1841 2101 2171 2205 2102 2136 2310512DT 1748 2099 1837 2064 2232 2266 2132 2166 2371

511L 1924 2326 2013 2291 2369 2403 2308 2342 2508

F-25-CWDC-L-BE F-25-CWDC-L-NL F-25-CWDC-L-DT

VR Lever F-25-CWDC-L

Thumbpiece F-25-CWDC-TP F-25-CWDC-TP-BE F-25-CWDC-NL

Knob F-25-CWDC-K F-25-CWDC-K-BE F-25-CWDC-K-NL F-25-CWDC-K-DT

DT Pull F-25-CWDC-DT F-25-CWDC-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10', see page 56 for extension rod add. 25 Series devices with trims furnished in SP313. Handing: F-25-CWDC Devices, Lever Trim and 717DT are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.

Sex Bolts: 90 minute doors for WDC fire devices assume a Steel Channel Door Construction (SCDC).Sex Bolts are required and added to the order for center case mounting when device is used with hollow core or composite doors.See chart below for quantities and list prices.

Latches Device Sex Bolt 325 Sex Bolt 425 List Add

- 6 $51- 2 17

Application

Device Series F-25-CWDCDevices are priced 3', complete with standard trim and strikes.



EO (Exit only device) - SCDC Device x Trim - SCDC



25 Device Options

Cylinder DoggingNot for use with Fire Exit Hardware

Prefix List Add

CD Cylinder Dogging available on all 25 series Panic Devices 59LD Less Dogging available on all 25 series Panic Devices 26

Less Bottom RodSuffix List Add

LBR Available with UL Fire Label at no additional charge on F-25-V and F-25-C devices. NCFire rated LBR devices must be ordered in pairs of Vertical Rod Devices.For Fire Rated Devices specify on device LBR and second device LBR-AFL.Second device provided with a Fire Pin.WDC Fire LBR devices are for 20 minute rating only. Consult Wood Door manufacturerfor UL Fire Ratings greater than 20 minutes.

Hurricane DeviceMeets all FBC Hurricane Listings. Consult factory for specific Applications.

Prefix List Add

HH Hurricane option available on 25-R, F-25-R, 25-V, F-25-V. Prefix device “HH”. 27Note: HH25-V and HH-F-25-V, will be supplied with twelve sexbolts. Add $96.00 list.

Standard Devices 25-C, F-25-C, 25-M, F-25-M meet all FBC Hurricane NClisting requirements. Consult factory for specific applications.Prefix “HH” is not required on these devices.

Electric Dogging / Electric Latch RetractionPrefix List Add

ED Electric Dogging - Available on all 25 series Panic and Fire Devices 387Electrical Dogging cannot be used in combination with CD, EA, HWEA, EL or KOR options.

EL Electric Latch Retraction - Available on all 25 series Panic and Fire Devices 526Electrical Latch cannot be used in combination with CD, ED, EA, HWEA or KOR options.


RX Touch Bar Request to Exit Switch available on all 25 series Devices. 211RX dogging monitoring switch can be used in combination with a secondRX, DM or LM switch. Add $203 list.

DM Touch Bar and Latch Bolt Monitoring Switch available on most 25 series Devices. 211DM device monitoring switch can be used in combination with a RX switch. Add $211 list.

LM Latch Bolt Monitoring Switch available on most 25 series Devices. 211Not available on F-25-R devices, with dual LM switches or in combination with DM switch.LM device monitoring switch can be used in combination with a RX switch. Add $211 list.

KOR Key Override - Override device monitoring on a door by use of a keyed cylinder. 55KOR must be used in combination with a device monitoring switch.





EA Exit Alarm 387For Surface Vertical Devices, specify device with DM (Device Monitor Switch). Add $211 list.9 Volt battery included. Not available with KOR.

HWEA Hard-Wired Exit Alarm available on 25-R and 25-V Panic and Fire Devices. 791For Surface Vertical Devices, specify device with DM (Device Monitor Switch) Add $211 list.9 Volt battery included. Not available with KOR.PS902 Power Supply required and must be used for warranty to apply. See page 33 for pricing.

HWK Hard-Wired Adapter for field installation to eliminate 9 volt battery. 405Order part number 650305.

(continued) Device Options 25

Electric Lock or Unlock of TrimsPrefix List Add

FSA Electric Lock/Unlock Trim, Fail Safe (unlocks when power is interrupted). 300FSE Electric Lock/Unlock Trim, Fail Secure (locks when power is interrupted). 300

Available on all 25 series devices.Available with TP, K, or L functions only.Can be used in combination with EL, ED, EA, HWEA or any Device Monitoring Switch.

33 Price Book 2011A • Effective July 18, 2011 • Rev. 7/11 (2)


25 Electrical Accessories Delayed Exit SystemDesigned to meet NFPA 101 “Special Locking Arrangement” applicationsA complete delayed egress system requires several components not included with controller.

Consult catalog for details.

PS902 can be supplied with one option board.PS914 can have a combinations of one or two.* For field installation, use model number. Example: 900-2RS.

Power Supply Overview Installation has been simplified in the PS900 series of Power Supplies by utilizing a flat mounting design and polarized lockingconnectors for option boards. This new design eliminates the need for racks and side connectors. The flat mounting of theoption boards also provides for easier access to the terminal blocks for connection of electrified devices (such as electrifiedpanic devices, strikes, card readers, etc). Common to the line of PS900 Series power supplies is a constant output rating at both12v and 24v settings, universal 120 VAC to 240 VAC input, and polarized option board connectors. New fire alarm interfaceboard mounting allows outputs to be configured as switched (power cut) or unswitched (power continues) when signal provided.

Power SuppliesAll PS900 Series of power supplies and option boards have been tested and certified to meet UL294.Model No. Description List Price

PS902 2 AMP 210PS902BBK 2 AMP With Battery Backup 410PS902FA 2 AMP With Fire Alarm 260

PS914 4 AMP High Inrush 593PS914BBK 4 AMP High Inrush With Battery Backup 793PS914FA 4 AMP High Inrush With Fire Alarm. Must specify board to have FA. 643

BAA "Buy America Act" compliant power supply option 32will be labeled as "Assembled in the U.S.A. with U.S. and foreign materials"

When specifying PS914 power supply for use with "EL" Electric Latch Retraction devices, the 2RS or 2Q board is furnishedwhen board option not specified.

Option BoardsModel No. Suffix Description Part # List Price

900-2RS x2RS 2 Relay Output (PS914 ONLY) 44489896-00 145900-2Q x2Q 2 Relay Output for QEL 44489904-00 170900-4R x4R 4 Relay Output 44489912-00 140900-4RL x4RL 4 Relay Output w/Logic 44489920-00 389900-8P x8P 8 PTC Output 44489938-00 50900-8F x8F 8 Fused Output 44489946-00 50900-BBK Battery Backup Board and Batteries 44489961-00 200900-BB Battery Backup Board Only 44489953-00 100900-BAT Batteries Only (qty 2) 44487155-00 100

Model No. Description List Price

DE5101 Logic Controller *15 Second Delay furnished standard 754*Over 15 second delay requires a letter of approval from authority having local jurisdiction. Fax Letter in with Sales Order.Order cannot be processed without the letter.

Electric Power TransfersModel No. Description SP28 SP313 Wt.lbs./oz.

EPT 2 Two 18 gauge wires 441 441 2.5EPT 10 Ten 24 gauge wires 467 467 2.5



Notes

XX-R Series DevicesDevices are furnished standard for door widths up to 4' and priced complete with standard trim and strikes. Cylinders are not included in price unless noted.

Exit Hardware US3Rim Devices US4 SP313 US26(Price includes F570 Strike) Trim US10 US32D US26D US32

XX-R-EO – 830 1000 1090 1130Athena

XX-R-DT 815DT 938 1199 1289 1329XX-R-NL 815NL 948 1214 1304 1344XX-R-C 815C 866 1054 1144 1184XX-R-TP 815TP 970 1238 1328 1368XX-R-TP-BE 815TP-BE 970 1238 1328 1368XX-R-TP-NL 815TP 970 1238 1328 1368

KnobXX-R-K 811K 1014 1217 1342 1382XX-R-K-BE 811K-BE 1014 1217 1342 1382XX-R-K-NL 811K 1014 1217 1342 1382XX-R-K-DT 811K-DT 1014 1217 1342 1382

Dane LeverXX-R-L 812L 1125 1346 1443 1483XX-R-L-BE 812L-BE 1125 1346 1443 1483XX-R-L-NL 812L 1125 1346 1443 1483XX-R-L-DT 812L-DT 1125 1346 1443 1483

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.Handing: The XX-R Device and Lever Trims are handed and field reversible. Device and Trim are furnished RHR when handing is not specified.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The EO Device is compatible with all device functions except all L, K and KIL. When ordering device only for L, K and KIL functionsspecify device with function “less trim”. Example: XX-R-L less trim.NL function is in device, trim does not change.

Sex Bolts:Optional Sex Bolts are recommended for center case and end case mounting when device is used with hollow core wood,composite or light gauge hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 2729 List AddEO (exit only device) 8 $56Device x Athena Trim 8 56Device x all other Trims 4 28

◆

●

●

●

●

▲●

▲●

★▲●

▲●

★

★

★

◆

●

▲





Device Series F-XX-RDevices are furnished standard for door widths up to 4'

and priced complete with standard trim and strikes. Cylinders are not included in price unless noted.

FIRE EXIT HARDWARE US3Rim Devices US4 SP313 US26(Price includes F570 Strike) Control Trim US10 US32D US26D US32

F-XX-R-EO – 1129 1257 1340 1375Athena

F-XX-R-DT 815DT 1237 1456 1539 1574F-XX-R-NL 815NL 1247 1471 1554 1589F-XX-R-C 815C 1165 1311 1394 1429F-XX-R-TP 815TP 1269 1495 1578 1613F-XX-R-TP-BE 815TP-BE 1269 1495 1578 1613F-XX-R-TP-NL 815TP 1269 1495 1578 1613

KnobF-XX-R-K 811K 1313 1474 1592 1627F-XX-R-K-BE 811K-BE 1313 1474 1592 1627F-XX-R-K-NL 811K 1313 1474 1592 1627F-XX-R-K-DT 811K-DT 1313 1474 1592 1627

Dane LeverF-XX-R-L 812L 1424 1603 1693 1728F-XX-R-L-BE 812L-BE 1424 1603 1693 1728F-XX-R-L-NL 812L 1424 1603 1693 1728F-XX-R-L-DT 812L-DT 1424 1603 1693 1728

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.Handing: The F-XX-R Device and Lever Trims are handed and field reversible. Device and Trim are furnished RHR when handing is not specified.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The EO Device is compatible with all device functions except all L, K and KIL. When ordering device only for L, K and KIL functionsspecify device with function “less trim”. Example: F-XX-R-L less trim. NL function is in device, trim does not change.

Sex Bolts:Sex Bolts are required and added to the order for center case and end case mounting when device is used with wood,composite or non-reinforced hollow metal doors. See chart below for quantities and list prices.


★

★

★

◆

●

●

●

●

▲●

▲●

★▲●

▲●

◆

●

▲



XX-V Device Series Devices are furnished standard for door widths up to 4' and priced complete with standard trim and strikes. Cylinders are not included in price unless noted.

EXIT HARDWARE US3Surface Vertical Rod Devices US4 SP313 US26(Price includes 3788 and 2130 Strikes ) Trim US10 US32D US26D US32

XX-V-EO – 1175 1400 1400 1635Athena

XX-V-DT 815DT 1283 1599 1599 1834XX-V-NL 815NL 1293 1614 1614 1849XX-V-C 815C 1211 1454 1454 1689XX-V-TP 815TP 1315 1638 1638 1873XX-V-TP-BE 815TP-BE 1315 1638 1638 1873XX-V-TP-NL 815TP 1315 1638 1638 1873

KnobXX-V-K 811K 1359 1617 1652 1887XX-V-K-BE 811K-BE 1359 1617 1652 1887XX-V-K-NL 811K 1359 1617 1652 1887XX-V-K-DT 811K-DT 1359 1617 1652 1887

Dane LeverXX-V-L 812L 1470 1746 1753 1988XX-V-L-BE 812L-BE 1470 1746 1753 1988XX-V-L-NL 812L 1470 1746 1753 1988XX-V-L-DT 812L-DT 1470 1746 1753 1988

Delta Thumb LeverXX-V-TL 719TL 1436 1661 1678 1913XX-V-TL-BE 719TL-BE 1436 1661 1678 1913XX-V-TL-NL 719TL-NL 1436 1661 1678 1913

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.For Door Heights over 7' up to 8' extension rods are furnished at no additional charge.For Door Heights over 8' up to 10', see page 56 for extension add.Handing: The XX-V Device, Lever Trims and 719 Trim are handed and field reversible. Device and Trim are furnished RHR when handing is not specified.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The EO Device is compatible with all device functions except all L and K. When ordering device only for L and K functions specify devicewith function “less trim”. Example: XX-V-L less trim.NL function is in device, trim does not change.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts:Optional Sex Bolts are recommended for center case, end case and latch mounting when device is used with hollow corewood, composite or light gauge hollow metal doors. See chart below for quantities and list prices.

Latches Center/End CaseApplication Sex Bolt 2729 Sex Bolt 2729 List AddEO (exit only device) 6 8 $98Device x Athena Trim 6 8 98Device x all other Trims 6 4 70

▲●

▲●

★ ▲●

▲●

★

★

★

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

■

◆

◆

◆

●

●

●

◆

●

▲

■



Device Series F-XX-VDevices are furnished standard for door widths up to 4'


FIRE EXIT HARDWARE US3Surface Vertical Rod Devices US4 SP313 US26(Price includes 3788 and 2130 Strikes) Control Trim US10 US32D US26D US32

F-XX-V-EO – 1636 1845 1992 2053Athena

F-XX-V-DT 815DT 1744 2044 2191 2252F-XX-V-NL 815NL 1754 2059 2206 2267F-XX-V-C 815C 1672 1899 2046 2107F-XX-V-TP 815TP 1776 2083 2230 2291F-XX-V-TP-BE 815TP-BE 1776 2083 2230 2291F-XX-V-TP-NL 815TP 1776 2083 2230 2291

KnobF-XX-V-K 811K 1820 2062 2244 2305F-XX-V-K-BE 811K-BE 1820 2062 2244 2305F-XX-V-K-NL 811K 1820 2062 2244 2305F-XX-V-K-DT 811K-DT 1820 2062 2244 2305

Dane LeverF-XX-V-L 812L 1931 2191 2345 2406F-XX-V-L-BE 812L-BE 1931 2191 2345 2406F-XX-V-L-NL 812L 1931 2191 2345 2406F-XX-V-L-DT 812L-DT 1931 2191 2345 2406

Delta Thumb LeverF-XX-V-TL 719TL 1897 2106 2270 2331F-XX-V-TL-BE 719TL-BE 1897 2106 2270 2331F-XX-V-TL-NL 719TL-NL 1897 2106 2270 2331

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.For Door Heights over 7' up to 8' extension rods are furnished at no additional charge.For Door Heights over 8' up to 10', see page 56 for extension add.Handing: The F-XX-V Device, Lever Trims and 719 Trim are handed and field reversible. Device and Trims are furnished RHR when handing is not specified.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The EO Device is compatible with all device functions except all L, K and KIL. When ordering device only for L, K and KIL functionsspecify device with function “less trim”. Example: F-XX-V-L less trim. NL function is in device, trim does not change. Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts:Sex Bolts are required and added to the order for center case, end case and latch mounting when device is used with wood,composite or non-reinforced hollow metal doors. See chart below for quantities and list prices.

Latches Center/End CaseApplication Sex Bolt 2729 Sex Bolt 2729 List AddEO (exit only device) 6 8 $98Device x Athena Trim 6 8 98Device x all other Trims 6 4 70

★

▲●

▲●

★ ▲●

▲●

★

★

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

◆

◆

◆

●

●

●

◆

●

▲

■

■



XX-M Device SeriesDevices are furnished standard for door widths up to 4' and priced complete with standard trim and strikes. Cylinders are not included in price unless noted.

EXIT HARDWARE US3Mortise Lock Devices US4 SP313 US26(Price includes 1279 Strike) Trim US10 US32D US26D US32

XX-M-EO – 1134 1273 1354 1391Athena

XX-M-DT 815DT 1242 1472 1553 1590XX-M-NL 815NL 1252 1487 1568 1605XX-M-C 815C 1170 1327 1408 1445XX-M-TP 815TP 1274 1511 1592 1629XX-M-TP-BE 815TP-BE 1274 1511 1592 1629XX-M-TP-NL 815TP 1274 1511 1592 1629

KnobXX-M-K 811K 1318 1490 1606 1643XX-M-K-BE 811K-BE 1318 1490 1606 1643XX-M-K-NL 811K 1318 1490 1606 1643XX-M-K-DT 811K-DT 1318 1490 1606 1643

Dane LeverXX-M-L 812L 1429 1619 1707 1744XX-M-L-BE 812L-BE 1429 1619 1707 1744XX-M-L-NL 812L 1429 1619 1707 1744XX-M-L-DT 812L-DT 1429 1619 1707 1744

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to pages 52-53.For Standard and Optional Strikes, refer to page 46.Handing: The XX-M Device is handed but not field reversible. Specify handing RHR or LHR.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The Mortise Lock determines function of the device. When ordering device only, specify device with function “Less Trim”. Example: XX-M-L less trim.NL function is in mortise lock, trim does not change.



★

▲

▲

★▲

▲

★

★

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

◆

●

▲

◆



Device Series F-XX-MDevices are furnished standard for door widths up to 4'


FIRE EXIT HARDWARE US3Mortise Lock Devices US4 SP313 US26(Price includes 1279 Strike) Control Trim US10 US32D US26D US32

F-XX-M-EO – 1248 1343 1508 1547Athena

F-XX-M-DT 815DT 1356 1542 1707 1746F-XX-M-NL 815NL 1366 1557 1722 1761F-XX-M-C 815C 1284 1397 1562 1601F-XX-M-TP 815TP 1388 1581 1746 1785F-XX-M-TP-BE 815TP-BE 1388 1581 1746 1785F-XX-M-TP-NL 815TP 1388 1581 1746 1785

KnobF-XX-M-K 811K 1432 1560 1760 1799F-XX-M-K-BE 811K-BE 1432 1560 1760 1799F-XX-M-K-NL 811K 1432 1560 1760 1799F-XX-M-K-DT 811K-DT 1432 1560 1760 1799

Dane LeverF-XX-M-L 812L 1543 1689 1861 1900F-XX-M-L-BE 812L-BE 1543 1689 1861 1900F-XX-M-L-NL 812L 1543 1689 1861 1900F-XX-M-L-DT 812L-DT 1543 1689 1861 1900

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.Handing: The F-XX-M Device is handed but not field reversible. Specify handing RHR or LHR.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The Mortise Lock determines function of the device. When ordering device only, specify device with function “Less Trim”. Example: F-XX-M-L less trim.NL function is in mortise lock, trim does not change.



★

▲

▲

★ ▲

▲

★

★

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

◆

●

▲

◆



XX-C Device SeriesDevices are furnished standard for door widths up to 4' and priced complete with standard trim and strikes. Cylinders are not included in price unless noted.

EXIT HARDWARE US3Concealed Vertical Rod Devices US4 SP313 US26(Price includes 4188 and 2130 Strikes) Trim/Control US10 US32D US26D US32

XX-C-EO – 1351 1515 1702 1741Delta

XX-C-DT 717DT 1508 1706 1928 1967XX-C-DT 718DT 1654 1687 1944 1983XX-C-NL 718NL 1508 1706 1928 1967XX-C-C 718C 1474 1672 1874 1913XX-C-TP 718TP 1612 1862 2049 2088XX-C-TP-BE 718TP-BE 1612 1862 2049 2088XX-C-TP-NL 718TP-NL 1612 1862 2049 2088XX-C-TL 719TL 1612 1776 1980 2019XX-C-TL-BE 719TL-BE 1612 1776 1980 2019XX-C-TL-NL 719TL-NL 1612 1776 1980 2019XX-C-TLP 719TLP 1612 1776 1995 2034XX-C-TLP-BE 719TLP-BE 1612 1776 1995 2034XX-C-TLP-NL 719TLP-NL 1612 1776 1995 2034

KnobXX-C-K 711K 1499 1728 1970 2009XX-C-K-BE 711K-BE 1499 1728 1970 2009XX-C-K-NL 711K-NL 1499 1728 1970 2009XX-C-K-DT 711K-DT 1499 1728 1970 2009

Dane Lever ControlsXX-C-L 712L 1644 1825 2034 2073XX-C-L-BE 712L-BE 1644 1825 2034 2073XX-C-L-NL 712L-NL 1644 1825 2034 2073XX-C-L-DT 712L-DT 1644 1825 2034 2073

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.For Door Heights over 7' up to 8' extension rods are furnished at no additional charge.For Door Heights over 8' up to 10', see page 56 for extension add.Handing: All XX-C Device is handed but not field reversible. Specify handing RHR or LHR.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The “EO” Device is compatible with all device functions.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.


Application Sex Bolt 2729 List AddEO (exit only device) 8 $56Device x all other Trims 4 28

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

▲

■

◆

▲

▲

▲

▲

■

◆

◆

◆

◆

◆

◆

◆

◆

◆

◆



Device Series F-XX-CDevices are furnished standard for door widths up to 4'


FIRE EXIT HARDWARE US3Concealed Vertical Rod Devices US4 SP313 US26(Price includes 4188 and 2130 Strikes ) Control Trim US10 US32D US26D US32

F-XX-C-EO – 1466 1630 1646 1677Delta

F-XX-C-DT 717DT 1623 1821 1872 1903F-XX-C-DT 718DT 1769 1802 1888 1919F-XX-C-NL 718NL 1623 1821 1872 1903F-XX-C-C 718C 1589 1787 1818 1849F-XX-C-TP 718TP 1727 1977 1993 2024F-XX-C-TP-BE 718TP-BE 1727 1977 1993 2024F-XX-C-TP-NL 718TP-NL 1727 1977 1993 2024F-XX-C-TL 719TL 1727 1891 1924 1955F-XX-C-TL-BE 719TL-BE 1727 1891 1924 1955F-XX-C-TL-NL 719TL-NL 1727 1891 1924 1955F-XX-C-TLP 719TLP 1727 1891 1939 1970F-XX-C-TLP-BE 719TLP-BE 1727 1891 1939 1970F-XX-C-TLP-NL 719TLP-NL 1727 1891 1939 1970

KnobF-XX-C-K 711K 1614 1843 1914 1945F-XX-C-K-BE 711K-BE 1614 1843 1914 1945F-XX-C-K-NL 711K-NL 1614 1843 1914 1945F-XX-C-K-DT 711K-DT 1614 1843 1914 1945

Dane Lever ControlsF-XX-C-L 712L 1759 1940 1978 2009F-XX-C-L-BE 712L-BE 1759 1940 1978 2009F-XX-C-L-NL 712L-NL 1759 1940 1978 2009F-XX-C-L-DT 712L-DT 1759 1940 1978 2009

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.For Door Heights over 7' up to 8' extension rods are furnished at no additional charge.For Door Heights over 8' up to 10', see page 56 for extension add.Handing: All F-XX-C Device is handed but not field reversible. Specify handing RHR or LHR.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The “EO” Device is compatible with all device functions.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.


Application Sex Bolt 2729 List AddEO (exit only device) 8 $56Device x all other Trims 4 28

■ ●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

▲

■

◆

▲

▲

▲

▲

◆

◆

◆

◆

◆

◆

◆

◆

◆

◆



XX-CWDC Device Series Devices are furnished standard for door widths up to 4' and priced complete with standard trim and strikes. Cylinders are not included in price unless noted.

EXIT HARDWARE US3Wood Door Concealed Vertical Rod Devices US4 SP313 US26(Price includes 4188 and 2130 Strikes ) Trim/Control US10 US32D US26D US32

XX-C-WDC-EO – 1831 2096 2250 2288Delta

XX-C-WDC-DT 717DT 1988 2287 2476 2514XX-C-WDC-DT 718DT 2134 2268 2492 2530XX-C-WDC-NL 718NL 1988 2287 2476 2514XX-C-WDC-C 718C 1954 2253 2422 2460XX-C-WDC-TP 718TP 2092 2443 2597 2635XX-C-WDC-TP-BE 718TP-BE 2092 2443 2597 2635XX-C-WDC-TP-NL 718TP-NL 2092 2443 2597 2635XX-C-WDC-TL 719TL 2092 2357 2528 2566XX-C-WDC-TL-BE 719TL-BE 2092 2357 2528 2566XX-C-WDC-TL-NL 719TL-NL 2092 2357 2528 2566XX-C-WDC-TLP 719TLP 2092 2357 2543 2581XX-C-WDC-TLP-BE 719TLP-BE 2092 2357 2543 2581XX-C-WDC-TLP-NL 719TLP- NL 2092 2357 2543 2581

KnobXX-C-WDC-K 711K 1979 2309 2518 2556XX-C-WDC-K-BE 711K-BE 1979 2309 2518 2556XX-C-WDC-K-NL 711K-NL 1979 2309 2518 2556XX-C-WDC-K-DT 711K-DT 1979 2309 2518 2556

Dane Lever ControlsXX-C-WDC-L 712L 2124 2406 2582 2620XX-C-WDC-L-BE 712L-BE 2124 2406 2582 2620XX-C-WDC-L-NL 712L-NL 2124 2406 2582 2620XX-C-WDC-L-DT 712L-DT 2124 2406 2582 2620

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.For Door Heights over 7' up to 8' extension rods are furnished at no additional charge.For Door Heights over 8' up to 10', see page 56 for extension add.Handing: All XX-C-WDC Device is handed but not field reversible. Specify handing RHR or LHR.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The “EO” Device is compatible with all device functions.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.


Application Sex Bolt 2729 List AddEO (Exit only device) 8 $56Device x all other trim 4 28

■ ●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

▲

■

◆

▲

▲

▲

▲

◆

◆

◆

◆

◆

◆

◆

◆

◆

◆



Device Series F-XX-C-WDCDevices are furnished standard for door widths up to 4'

for 90 minute doors, and priced complete with standard trim and strikes. Cylinders are not included in price unless noted.

FIRE EXIT HARDWARE US3Wood Door Concealed Vertical Rod Devices US4 SP313 US26(Price includes 4188 and 2130 Strikes ) Trim/Control US10 US32D US26D US32

F-XX-C-WDC-EO – 1987 2252 2406 2444Delta Trim

F-XX-C-WDC-DT 717DT 2144 2443 2632 2670F-XX-C-WDC-DT 718DT 2290 2424 2648 2686F-XX-C-WDC-NL 718NL 2144 2443 2632 2670F-XX-C-WDC-C 718C 2110 2409 2578 2616F-XX-C-WDC-TP 718TP 2248 2599 2753 2791F-XX-C-WDC-TP-BE 718TP-BE 2248 2599 2753 2791F-XX-C-WDC-TP-NL 718TP-NL 2248 2599 2753 2791F-XX-C-WDC-TL 719TL 2248 2513 2684 2722F-XX-C-WDC-TL-BE 719TL-BE 2248 2513 2684 2722F-XX-C-WDC-TL-NL 719TL-NL 2248 2513 2684 2722F-XX-C-WDC-TLP 719TLP 2248 2513 2699 2737F-XX-C-WDC-TLP-BE 719TLP-BE 2248 2513 2699 2737F-XX-C-WDC-TLP-NL 719TLP- NL 2248 2513 2699 2737

Knob ControlF-XX-C-WDC-K 711K 2135 2465 2674 2712F-XX-C-WDC-K-BE 711K-BE 2135 2465 2674 2712F-XX-C-WDC-K-NL 711K-NL 2135 2465 2674 2712F-XX-C-WDC-K-DT 711K-DT 2135 2465 2674 2712

Dane Lever ControlF-XX-C-WDC-L 712L 2280 2562 2738 2776F-XX-C-WDC-L-BE 712L-BE 2280 2562 2738 2776F-XX-C-WDC-L-NL 712L-NL 2280 2562 2738 2776F-XX-C-WDC-L-DT 712L-DT 2280 2562 2738 2776

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.For Door Heights over 7' up to 8' extension rods are furnished at no additional charge.For Door Heights over 8' up to 10', see page 56 for extension add.Handing: All F-XX-C-WDC Device is handed but not field reversible. Specify handing RHR or LHR.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The “EO” Device is compatible with all device functions.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts:90 minute doors for WDC fire devices assume a Steel Channel Door Construction (SCDC).Sex Bolts are required and added to the order for center case mounting when device is used with hollow core or composite doors.See chart below for quantities and list prices.

Application Sex Bolt 2729 List AddEO (Exit only device) 8 $56Device x all other trim 4 28

■ ●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

▲

■

◆

▲

▲

▲

▲

◆

◆

◆

◆

◆

◆

◆

◆

◆

◆

XX Device OptionsLess Bottom RodSuffix

LBR Available at no additional charge on Vertical and Concealed Vertical Rod Devices NCFire rated LBR devices must be ordered in pairs of Vertical Rod Devices. For Fire Rated Devices specify one device LBR and second device LBR-AFL.

Second device provided with an Auxiliary Fire Bolt Latch.

WDC Fire LBR devices are for 20 minute rating only. Consult Wood Door manufacturer for

UL Fire Ratings greater than 20 Minutes.

Electric Lock or Unlock of TrimsPrefix List Add

FSA Electric Lock/Unlock Trim, Fail Safe (unlocks when power is interrupted). 300Available on XX series Rim and Surface Vertical Devices.

FSE Electric Lock/Unlock Trim, Fail Secure (locks when power is interrupted). 300

Available on XX series Rim and Surface Vertical Devices.





StrikesUn- US4 SP313

Model No. Description finished US19 US26D US32D US10 US10B US3 US26

Rim Strikes264 24/25-R Panic Devices - Optional — 79 90 90 — — — —299 24/25-R Panic Devices - Standard — 47 56 — 56 56 73 73299F 24/25-R Fire Devices - Standard — 60 *80 *80 92 92 106 106499F 25-R Fire Devices - Optional — 141 *147 *147 161 161 — ―

F490 19-R/XX-R Panic and Fire Devices - Optional 42 — — — — — — —565 19-R/XX-R Panic Devices - Optional — — 42 42 42 42 42 42F570 19-R/XX-R Panic and Fire Devices - Standard — 42 — — — — — —571 19/XX-R inactive Leaf Strike 2 7/8˝ backset - Optional — — 42 42 42 42 42 42571A 19/XX-R inactive Leaf Strike 2 3/8˝ backset - Optional — — 42 42 42 42 42 42579 XX-R Panic Devices - Optional — — 42 42 42 42 42 421439 24/25-R Panic Devices - Optional 114 — — — — — — —1606 24/25-R Panic Devices - Optional 57 — — — — — — —1609 25-R Panic Devices - Optional — 79 87 87 87 87 94 94

Vertical Rod Top Strikes3788 19/24/25/XX-V Panic and Fire Devices - Standard 42 — — — — — — —4188 24/25/XX-C, CWDC Panic and Fire Devices - Standard 42 — — — — — — —4188NS 24-C, CWDC Panic Devices - Optional 42 — — — — — — —

Vertical Rod Bottom Strikes2130 19-V/24/25/XX-V,C,CWDC Panic or Fire - Standard 42 — — — — — — —4155 19-V/24/25/XX-V,C,CWDC Panic or Fire - Optional — — 42 42 42 42 42 42

Mortise Lock Strikes1279 25/XX-M Panic and Fire Devices - Standard 42 — — — — — — —F1280 25-M Fire Devices - Optional 42 — — — — — — —1281 25/XX-M Panic Devices - Optional — — 42 42 42 42 42 42

REFERENCE NOTES:Refer to device catalogs for specific door application strike requirements.For Flush Transom applications, Specify 4215 Angle Bracket, add $42 List.For mounting plate, Specify 4306, add $30 List.1609 Strike must be used with a Coordinator. Not a UL fire exit hardware listed application.

●

●

●

▲

▲

How to Order Sequence Example510 L - R US26D LHR SUTRO FSE CYL

Trim SeriesD24 Series D25 Series 19 Series XX Series

710 510 910 810

711 511 911 811

712 512 912 812

715 513 914 814

717 717 917 815

718 920 816

719 930 820

711

712

717

718

719

Trim Function (see Trim pages for all functions)

EO Exit OnlyDT Dummy TrimNL Night LatchC Cylinder Trim Less PullTP ThumbpieceK KnobL Lever (Dane Standard)KIL Key in LeverTL Thumb Lever

Device TypeR RimV Surface Vertical RodM MortiseC Concealed Vertical Rod (includes WDC)

FinishUS3 US15 US32D

US4 US26 SP28

US10 US26D SP313

US10B US32

HandingRHR Right Hand ReverseLHR Left Hand Reverse

Lever StyleDANE supplied standard if not specifiedSUTRO

QUANTUM

AVALON

Trim OptionsFSA Electric Lock or Unlock-Fail Safe (FSA device required)FSE Electric Lock or Unlock-Fail Secure (FSE device required)

Other Information or AccessoriesCYL Include Cylinder with TrimKD Cylinder Keyed Different

Door ThicknessSpecify door thickness other than 1-3/4"

Trim - How to Order





Series Trims 19For other possible trim applications not shown, consult factory.


19 Series TrimOld Lever SP28

Model No. Model No. Style Description SP313 US15Trident Trim

920DT 1953DT – Dummy Trim 44 –920NL 1955P – Night Latch 76 –

Centron Trim930EO 2301BE – Exit Only 40 40917DT 1904 Pull Only – Dummy Trim 35 35930DT 2303DT – Dummy Trim 44 44930NL 2305P – Night Latch 61 61930C 2302C – Night Latch Less Pull 54 54

Control Trim918DT – Dummy Trim 128 233918NL – Night Latch 128 233

910DT 1908DT – Dummy Trim 128 233910NL 1909P – Night Latch 128 233910TP 1906T – Thumbpiece, Key Locks or Unlocks 128 233910TP-BE 1926T LS/LK – Thumbpiece, Blank Escutcheon 128 233911TP-NL – – Thumbpiece, Night Latch 128 233911K 1907K – Knob, Key Locks or Unlocks 128 233911K-BE 1927K LS/LK – Knob, Blank Escutcheon 128 233911K-DT 1987K-DT – Knob, Dummy Trim 128 233911K-NL – – Knob, Night Latch 128 233912L 1910L Dane Lever, Key Locks or Unlocks 177 272912L-BE 1920L LS/LK Dane Lever, Blank Escutcheon 177 272912L-NL 1910L-NL Dane Lever, Night Latch 177 272912L-DT 1980L-DT Dane Lever, Dummy Trim 177 272

Key In Lever Trims914KIL-KD 2400KIL – Key in Lever, Keyed Different 213 213914KIL-BE 2401KIL LS/LK – Key in Lever, Blank Escutcheon 213 213914KIL-NL-KD 2402KIL NL – Key in Lever, Night Latch, Keyed Different 213 213914KIL-IC 2400KIL W/IC CORE – Key in Lever with IC Core 262 262

REFERENCE NOTES:The Dane Lever is furnished standard. Optional lever designs Sutro, Quantum and Avalon are available at no additional charge.Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified.Handing: 920 series Trims are handed and not field reversible. Specify handing RHR or LHR.Available in SP313 and US32D finishes only.Available 2/28/2011.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

**◆

◆

◆ ●

◆ ●

◆●

●

◆ ●

●

●

●

●

▲ ●

▲ ●

▲ ●

▲ ●

●

■

▲

*◆

■

■

▲

▲

▲

▲



24 Series Trim

Old Device US4 Model No. Model No. Type Description SP28 SP313 US10 US15

Athena Trim 715DT 1303DT R, V Dummy Trim 108 199 108 — 199

148 213 148 213 268148 213 148 213 268148 213 148 213 268148 213 148 213 268148 213 148 213 268148 213 148 213 268148 213 148 213 268148 213 148 213 268

Control Trim 710DT 1797DT R, V Dummy Control 710NL 1799P R, V Night Latch 710TP 1796T R, V Thumbpiece, Key Locks or Unlocks 710TP-BE 1793T LS/LK R, V Thumbpiece, Blank Escutcheon 711K 1604K R, V Knob, Key Locks or Unlocks 711K 1764K C Knob, Key Locks or Unlocks 711K-BE 1614K LS/LK R, V Knob, Blank Escutcheon 711K-BE 1774K LS/LK C Knob, Blank Escutcheon

148 213 148 213 268148 213 148 213 268

711K-DT 1624K-DT R, V Knob, Dummy Control711K-DT 1784K-DT C Knob, Dummy Control

148 213 148 213 268148 213 148 213 268

711K-NL 1624K-NL R, V Knob, Dummy Control711K-NL 1784K-NL C Knob, Dummy Control

Delta Controls 717DT 1600-DT R, V Dummy Trim 157 191 157 191 226

157 191 157 191 226303 172 303 172 242303 172 303 172 242157 191 157 191 226157 191 157 191 226123 157 123 157 172123 157 123 157 172261 347 261 347 347261 347 261 347 347261 347 261 347 347261 347 261 347 347261 261 261 261 278261 261 261 261 278261 261 261 261 278261 261 261 261 278261 261 261 261 278261 261 261 261 278261 261 261 261 293261 261 261 261 293261 261 261 261 293

717DT 1760-DT C Dummy Trim 718DT 1622T-DT R, V Dummy Trim 718DT 1743T-DT C Dummy Trim 718NL 1601P R, V Night Latch 718NL 1740P C Night Latch 718C 1603C R, V Night Latch Less Pull 718C 1713C C Night Latch Less Pull 718TP 1602T R, V Thumbpiece, Key Locks or Unlocks 718TP 1741T C Thumbpiece, Key Locks or Unlocks 718TP-BE 1612T LS/LK R, V Thumbpiece, Blank Escutcheon 718TP-BE 1742T LS/LK C Thumbpiece, Blank Escutcheon 719TL 1618SL V Thumbturn, Key Locks or Unlocks 719TL 1738SL C Thumbturn, Key Locks or Unlocks 719TL-BE LS/LK V Thumbturn, Blank Escutcheon 719TL-BE C Thumbturn, Blank Escutcheon 719TL-NL 1619SL-NL V Thumbturn, Night Latch 719TL-NL 1739SL-NL C Thumbturn, Night Latch 719TLP 1728SLP C Thumbturn with Pull 719TLP-BE C Thumbturn with Pull, Blank Escutcheon

C Thumbturn with Pull, Night Latch

REFERENCE NOTES:Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified. 715DT not available in US32 or US32D finish.

Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

24 Series TrimsFor other possible trim applications not shown, consult factory. Cylinders are not included in price unless noted.

US3US26

US26D

719TLP-NL 1729SLP-NL

Electric Lock or Unlock option is available on Trims for use on Rim or Surface Vertical Devices.Available with TP, K or L functions only.Suffix FSA for Fail Safe operation, or FSE for Fail Secure operation. Add $300 list.

24 Series Trim

Old Device Lever US4 Model No. Model No. Type Style Description SP28 SP313 US10 US15

Control Lever Trim 712L 1606L R, V Dane Lever, Key Locks or Unlocks 293 310 293 310 332

293 310 293 310 332 293 310 293 310 332 293 310 293 310 332 293 310 293 310 332 293 310 293 310 332 293 310 293 310 332 293 310 293 310 332

712L 1766L C Dane Lever, Key Locks or Unlocks 712L-BE 1616L LS/LK R, V Dane Lever, Blank Escutcheon 712L-BE 1776L LS/LK C Dane Lever, Blank Escutcheon 712L-NL 1606L-NL R, V Dane Lever, Night Latch 712L-NL 1766L-NL C Dane Lever, Night Latch 712L-DT 1626L-DT R, V Dane Lever, Dummy Trim 712L-DT 1786L-DT C Dane Lever, Dummy Trim

(continued) Series Trims 24For other possible trim applications not shown, consult factory.


US3US26

US26D

REFERENCE NOTES:

Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified. The Dane Lever is furnished standard. Optional lever designs Sutro, Quantum and Avalon are available at no additional charge.

Electric Lock or Unlock option is available on Trims for use on Rim or Surface Vertical Devices.Available with TP, K or L functions only.Suffix FSA for Fail Safe operation, or FSE for Fail Secure operation. Add $300 list.



25 Series Trim US3

Lever Device SP28 US4 US26 Model No. Style Type Description SP313 * US10 US32D US26D US32

Lever Trim 510L Dane R, V, M, C Lever, Key Locks or Unlocks 310 310 363 363 370

249 249 291 291 296249 249 291 291 296310 310 363 363 370

363 363 416 416 424

223 223 244 244 287278 278 305 305 358278 278 305 305 358

233 233 274 274 318233 233 274 274 318233 233 274 274 318233 233 274 274 318

157 191 157 191 226 226123 157 123 157 172 172

510L-NL Dane R, V, M, C Lever, Night Latch 510L-DT Dane R, V, M, C Lever, Dummy Trim 510L-BE Dane R, V, M, C Lever, Blank Escutcheon

Optional Lever designs Avalon, Quantum and Sutro are available at no additional charge.

Vandal Resistant Trim 511L Dane R, V, M, C Lever, Key Locks and Unlocks

Optional Lever designs Avalon, Quantum and Sutro are available at no additional charge.

512TP R, V, M, C Thumbpiece, Key Locks and Unlocks512NL R, V, M, C Night Latch

512TP-BE R, V, M, C Thumbpiece, Blank Escutcheon

Knob Trim 513K R, V, M, C Knob, Key Locks or Unlocks 513K-NL R, V, M, C Knob, Night Latch 513K-DT R, V, M, C Knob, Dummy Trim 513K-BE R, V, M, C Knob, Blank Escutcheon

US3US4 US26

DeltaTrim SP28 SP313 US10 US32D US26D US32717DT R, V, M, C Dummy Trim

Dummy Trim512DT R, V, M, C 187 187 189 189 287

REFERENCE NOTES:

* Trim furnished in SP313 finish when ordered with 313AN devices

25 Series TrimsFor other possible trim applications not shown, consult factory.Cylinders are not included in price unless noted.

718C C

Night Latch and Thumbpiece Trim

Dummy Trim

Night Latch Less Pull

Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified.•

••

••••

•





Series Trims XXFor other possible trim applications not shown, consult factory.


US3XX Series Trim US26

Old Device US4 SP313 US26DModel No. Model No. Type Description US10 US32D US32

Athena Trim815DT 1300DT R, V, M Dummy Trim 108 199 199

815NL 1301P R, V, M Night Latch 118 214 214

815C 3577C R, V, M Night Latch Less Pull 36 54 54

815TP 1302T R, V, M Thumbpiece, Key Locks or Unlocks 140 238 238

815TP-BE R, V, M Thumbpiece, Blank Escutcheon 140 238 238

Delta Trim718DT 1760DT C Dummy Trim 303 172 242

717DT 1743T-DT C Dummy Trim 157 191 226

718NL 1740P C Night Latch 157 191 226

718C 1713C C Night Latch Less Pull 123 157 172

718TP 1741T C Thumbpiece, Key Locks or Unlocks 261 347 347

718TP-BE 1742T LS/LK C Thumbpiece, Blank Escutcheon 261 347 347

719TL 1618SL V Thumbturn, Key Locks or Unlocks 261 261 278

719TL 1738SL C Thumbturn, Key Locks or Unlocks 261 261 278

719TL-BE 1658SL LS/LK V Thumbturn, Blank Escutcheon 261 261 278

719TL-BE C Thumbturn, Blank Escutcheon 261 261 278

719TL-NL 1619SL-NL V Thumbturn, Night Latch 261 261 278

719TL-NL 1739SL-NL C Thumbturn, Key Locks or Unlocks 261 261 278

719TLP 1728SLP C Thumbturn with Pull 261 261 293

719TLP-BE C Thumbturn with Pull, Blank Escutcheon 261 261 293

719TLP-NL 1729SLP-NL C Thumbturn with Pull, Night Latch 261 261 293

Vanguard Trim820EO 1348 R, V, M Exit Only 110 136 136

820DT 1344DT R, V, M Dummy Trim 136 157 157

820NL 1345P R, M, 18V, XXV Night Latch 172 172 208

820TP 1346T R Thumbpiece, Key Locks or Unlocks 202 252 261

820TP 1346T V, M Thumbpiece, Key Locks or Unlocks 202 252 261

820TP-BE 1346T LS/LK R, M Thumbpiece, Blank Escutcheon 202 252 261

Apollo Trim810EO 1448 R, V, M Exit Only 108 108 136

810DT 1444DT R, V, M Dummy Trim 126 157 191

810NL 1445P R, M, 18V, XXV Night Latch 135 165 208

810TP 1446T R Thumbpiece, Key Locks or Unlocks 156 191 208

810TP 1446T V, M Thumbpiece, Key Locks or Unlocks 156 191 208

810TP-BE 1446T LS/LK R, V, M Thumbpiece, Blank Escutcheon 156 191 208

REFERENCE NOTES:Handing: 700 Series Delta Trims are handed but field reversible. Trims are furnished RHR when handing is not specified.

Electric Lock or Unlock option is available on XX series Rim and Surface Vertical Rod Devices. FSA or FSE option on device required.For replacement trim specify trim with suffix FSA for fail safe option or FSE for fail secure operation. For FSA or FSE function with deviceand trim see page 45.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

▲

▲

▲

▲

▲

▲

●

▲

◆

◆

◆

◆

◆

◆

◆

◆

◆

◆

◆



XX Series Trims (continued)

For other possible trim applications not shown, consult factory.Cylinders are not included in price unless noted.

US3XX Series Trim US26

Old Device Lever US4 US10B US26DModel No. Model No. Type Style Description US10 US32D US32

Knob Trim811K 1811K R, V, M Knob, Key Locks or Unlocks 184 217 252

711K 1764K C Knob, Key Locks or Unlocks 148 213 268

811K-BE 1812K LS/LK R, V, M Knob, Blank Escutcheon 184 217 252

711K-BE 1774K LS/LK C Knob, Blank Escutcheon 148 213 268

811K-DT 1810K-DT R, V, M Knob, Dummy Trim 184 217 252

711K-DT 1784K-DT C Knob, Dummy Trim 148 213 268

Lever Trim812L 1821L R, V, M Dane Lever, Key Locks or Unlocks 295 346 353

712L 1766L C Dane Lever, Key Locks or Unlocks 293 310 332

812L-BE 1822L LS/LK R, V, M Dane Lever, Blank Escutcheon 295 346 353

712L-BE 1776L-LS/LK C Dane Lever, Blank Escutcheon 293 310 332

812L-DT 1820L-DT R, V, M Dane Lever, Dummy Trim 295 346 353

712L-DT 1786L-DT C Dane Lever, Dummy Trim 293 310 332

Breakaway Lever Trim816L 1821ST R, V, M Dane Lever, Key Locks or Unlocks 346 397 404

816L-BE 1822ST LS/LK R, V, M Dane Lever, Blank Escutcheon 346 397 404

816L-NL 1821ST-NL R, V, M Dane Lever, Night Latch 346 397 404

816L-DT 1820ST-DT R, V, M Dane Lever, Dummy Trim 346 397 404

▲

●

●

●

▲●

●

▲●

●

●

●

▲●

▲●

●

●

REFERENCE NOTES:The Dane Lever is furnished standard. Optional lever designs Sutro, Quantum, and Avalon are available at no additional charge.Handing: 711 and 814 Trims are handed but field reversible. Trims are furnished RHR when handing is not specified.Electric Lock or Unlock option is available on XX series Rim and Surface Vertical Rod Devices. FSA or FSE option on device required. For replacement trim specify trim with suffix FSA for fail safe option or FSE for fail secure operation.For FSA or FSE function with device and trim see page 45 for pricing.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

●

▲

◆

◆

◆



Cover Plates & Filler Plates

Cylinders

Model No. Description Unfinished SP313 US32D4167 For 19 Series TP and DT Controls when used on 86 or 161 door preps — 33 494168 For 19 Series EO when used on 86 door preps — 33 494170 For 19 Series K and L Controls when used on 86 or 161 door preps — 33 494174 For 19 Series device (push side) when used on 86 door preps — 33 493722 Strike Cover - ASA 4 - 7/8" 11 — —3723 Mortise front - 8" x 1-1/4" 11 — —3721 Lock front - 2-1/4" x 1-1/8" 11 — —

US4Model No. Description US10B US10 US26D US3 4032 Rim Cylinder, Keyed Different 31 31 31 314033 Threaded Mortise Cylinder, Keyed Different 31 31 31 314034 Threaded 1-1/2" Mortise Cylinder 31 31 31 31

US3US26

SP28 US4 US32Model No. Description SP313 US10 US26D US32D 985 1-1/8" Mortise Cylinder 55 57 57 58986 1-1/4" Mortise Cylinder 55 57 57 58951 Rim Cylinder 57 60 60 61C987 1-3/8" Interchangeable Core Mortise Cylinder 33 34 34 35C953 Interchangeable Core Rim Cylinder 34 34 34 36

Cylinder Dogging KitsSP313

US4 US10B US3, US32

Model No. Description US28 US10 US32D US26, US26D

19CDK-3 19 Series Cylinder Dogging Kit - 3' device 59 ― 59 ―

19CDK-4 19 Series Cylinder Dogging Kit - 4' device 59 ― 59 ―

24CDK-3 24 Series Cylinder Dogging Kit - 3' device 59 59 59 5924CDK-4 24 Series Cylinder Dogging Kit - 4' device 59 59 59 5925CDK-3 25 Series Cylinder Dogging Kit - 3' device 59 59 59 5925CDK-4 25 Series Cylinder Dogging Kit - 4' device 59 59 59 59

REFERENCE NOTES:Custom Keying not available. Falcon G - default keyway.

Dummy Touch Bars

REFERENCE NOTES: When used with outside trim for back to back mounting, finished fasteners are required, add $10.00 list.

Note: price shown are for 3' length, for 4' length add $25.00 to list price.

SP28 US4 US10B US3, US32 Model No. SP313 US10 US32D US26, US26D 190DT 19 Series Dummy Touch Bar 186 - - -250DT 24/25 Series Dummy Touch Bar 319 355 404 461

Optional Features:Prefix List Add

RX Touchbar Request to Exit Switch 211KOR Key Override device monitoring on a door by use of a keyed cylinder 55

Extension RodsAll

Model No. Description Finishes 650006 24/25/19/XX-V Extension Rod 12" 19650007 24/25/19/XX-V Extension Rod 24" 37650009 24/25/19/XX-V Extension Rod 36" 56650017 CV Extension Rod 12" 19650018 CV Extension Rod 24" 37650019 CV Extension Rod 36" 56

Electric and Alarm KitsUS3, US32

SP28 US4 US26

Model No. Description 313AN US10 US32D US26D

24-EAK-3 24 Series Exit Alarm Kit 3' 387 387 387 387




24-HWEAK-3 24 Series Hard Wired Exit Alarm Kit 3' 791 791 791 791




24-EDK-3 24 Series Electric Dogging Kit 3' 387 387 387 387




ELK-3 24/25 Electric Latch Retraction Kit 3' 526 526 526 526

ELK-4 24/25 Electric Latch Retraction Kit 4' 526 526 526 526

24-AEK-3 24 Series Authorized Egress Switch Kit 3' 211 211 211 211








Mullions

US3US4 US26

Model No. Description US10 US10B US26D

8500NL Night Latch 312 324 388REFERENCE NOTES:1. Old Mortise Lock model numbers: 1284-RHR and 1285-LHR2. US32D and US32 finish device supplied with US26D and US26 mortise lock.3. Mortise Device is handed. For replacement of Mortise Lock only, handing is field reversible. Lock is furnished RHR when handing is not specified.

Optional Features:Prefix List AddLM Latch Bolt Monitoring Switch - Available on all functions 211DM Touch Bar and Latch Bolt Monitor Switch - Available on all functions 211FSA Electric Lock/Unlock Trim, Fail Safe - L and TP functions only. 300FSE Electric Lock/Unlock Trim, Fail Secure - L and TP functions only. 300

REFERENCE NOTES:Mullions are Prime Coat finish only. Fire Rated for doors up to 8´

Up to

Model No. Description 7'2" 8'2" 9'2" 10'2"

2923 For use with all Rim Devices 346 374 404 4454023 For use with all Rim Devices 389 422 445 489F4023* Fire Rated; for use with F-19-R, F-24/25-R, and F-XX-R 556 601 — —4423 T Shaped, includes Strike 24-R series only 963 985 — —

Mullion Options List Add

KR Keyed Removable option Prefix mullion model "KR"KR-4023 Mullion 354KR-F-4023 Mullion 526

Accessories List Each

KR-4023 Keyed Removal Kit for existing 4023 Mullion 354KR-F4023 Keyed Removal Kit for existing F4023 Mullion 526

Strikes are not included except where indicated.When required, strikes should be ordered with devices.

Mortise Locks

▲

Sex BoltsBRS US3, US4

US10B US10, SP313Model No. Description Screw US26D US32, US32D

2729P Package of 1 - Includes Machine Screw 10-24 3/4" PPHMS 7.00 —2729F Package of 1 - Includes Machine Screw 10-24 3/4" FPHMS 7.00 —4122 Package of 1 - Includes Machine Screw 1/2-20 3/4" PPHMS 7.00 —325 Package of 2 10-24 — 17425 Package of 2 1/4-20 — 17



SLM Blocking

Model No. Description Part #

F-24-R/C F-24 Rim/Concealed Vertical SLM Blocking Kit 600333 15.50F-24-V F-24 Surface Vertical SLM Blocking Kit 600334 17.50F-25-R/C F-25 Rim/Concealed Vertical SLM Blocking Kit 600335 15.50F-25-V F-25 Surface Vertical SLM Blocking Kit 600336 17.50

For use with devices on doors with special high density blocking material.

Blocking material must be UL or Warnock Hersey approved.

Shim KitsModel No. Description US19

SK19-R 19 Rim Shim Kit - 1/4" 64SK19-V 19 Surface Vertical Shim Kit - 1/4" 64SK24-R 24 Rim Shim Kit - 1/4" 64SK24-V-8 24 Surface Vertical Shim Kit - 1/4" - over 7' up to 8' doors 64SK24-V-10 24 Surface Vertical Shim Kit - 1/4" - over 8' up to 10' doors 76SK25-R/M 25 Rim or 25 Mortise Shim Kit - 1/4" 64SK25V-8 25 Surface Vertical Shim Kit - 1/4" - over 7' up to 8' doors 64SK25V-10 25 Surface Vertical Shim Kit - 1/4" - over 8' up to 10' doors 76579 Retrofit Shim Kit - HH-25-R, HH-F25-R (Required) 26

REFERENCE NOTES:19 series shim kits for use on door thickness devices less trim. For devices with trim, consult factory.All shim kits for use on door thicknesses up to 2". Consult factory for door thickness over 2".



Device Series - Parts 19(F) 19 Exit Devices SP28Part No. Description Unfinished SP313 US32D Black

650307 19-R Center Case 70 – – –

650374 F-19-R Center Case 87 – – –

650308 19-V Center Case LHR 62 – – –

650309 19-V Center Case RHR 62 – – –

650384 19-R Center Case Cover Kit (w/Screws) – – – 31

650385 19-V Center Case Cover Kit (w/Screws) – – – 31

650338 19-R Center Case Cover Mounting Pkg 3.50 – – –

650334 19-V Center Case Cover Mounting Pkg 3.50 – – –

650393 19-V Center Case Retractor Cam 30 – – –

650390 19-V Drawba 9.50 – – –

650391 19-V Center Case Drawbar Lever 18 – – –

650392 19-V Center Case Slidebar Lever 12.50 – – –

4107 19 Channel 3' Door – 107 276 –

4108 19 Channel 4' Door – 123 305 –

650297 19 Panic Hex Dogging Kit 4' Door – 69 102 –

650303 19 Panic Hex Dogging Kit 3' Door – 50 81 –

610480 19 Panic Dogging Housing 14 – – –

060109 19 Panic Hex Dogging Key 7/32" (Pkg of 10) 12 – – –

060110 19 Panic Dogging Pin (Pkg of 10) 3.50 – – –

650343 19 Channel End Cap Kit (w/Screws) – – – –

650320 19 End Cap Mounting Bracket with SNB – 9.50 – –

650328 19-R Mounting Pkg – 23 23 –

650329 F-19-R Mounting Pkg – 23 23 –

650330 19-V Mounting Pkg – 35 35 –

650331 F-19-V Mounting Pkg – 35 35 –

3722 Strike ASA Filler Plate 10 – – –

660136 8-32 5/16" UFPHMS STL BO NYL 2.50 – – –

(F) 19-V Surface Vertical Rod and Latches SP28Part No. Description Unfinished SP313 US32D Black

650389 19-V Top Latch Case (Latch cover sold separately) 102 – – –

650388 19-V Latch Case Cover Kit (w/Screws) – – – 31

650337 19-V Latch Cover Mounting Pkg 5.50 – – –

650386 Rod Guide Kit (w/Screws) – – – 10.50

610045 Bottom Bolt Assembly 35 – – –

650387 Bottom Bolt Guide (Latch cover sold separately) 8.50 – – –

4286 19 Top Rod – 61 69 –

4288 19 Bottom Rod – 61 69 –

5494 F-19-V Auxiliary Fire Latch Kit (LBR application only) 343 – – –

24 Device Series - Parts

59

(F) 24 Exit DevicesUS10 US4

Part No. Description Unfinished US28 US32D 313AN US26D US26 US32 US3650233 24-R Center Case Kit 322 – – – – – – –

650234 F-24-R Center Case Kit 508 – – – – – – –

650236 (F) 24-V Center Case Kit 212 – – – – – – –

650238 (F) 24-C Center Case Kit 203 – – – – – – –

650247 24-R Center Case Cover Kit - 104 129 109 127 131 134 142

650249 F-24-R Center Case Cover Kit - 104 129 109 127 131 134 142

650251 (F) 24-V Center Case Cover Kit - 104 129 109 127 131 134 142

650253 (F) 24-C Center Case Cover Kit - 104 129 109 127 131 134 142

600307 24 Series Center Case Cover Mtg Pkg - 8 8 8 8 8 8 8

661408 24 Series Channel 3' Door - 68 84 72 81 85 87 93


650121 F-24 Series Channel Cover 3' - 34 34 34 34 34 34 34

650122 F-24 series Channel Cover 4' - 37 37 37 37 37 37 37

650116 24 Series CD Channel Cover 4' - 41 41 41 41 41 41 41


650131 24 Series EA Channel Cover 3' - 63 63 63 63 63 63 63


650139 24 Series KOR Channel Cover 3' - 50 50 50 50 50 50 50


650187 24 Series Hex Dogging Kit 3' - 54 54 54 54 54 54 54


610480 24 Panic Dogging Housing 14.50 - - - - - - -

060109 24 Hex Dogging Key 7/32" (Pkg of 10) 13.50 - - - - - - -

650294 24 Channel End Cap Kit 1-3/4" Door - 26 33 29 32 34 34 36


600305 24 Series Channel Screw Pkg 12.50 - - - - - - -

600310 24 Series Push Bar End Cap Kit - 29 35 30 34 35 36 38

600319 24 Series Push Bar Guide Pkg 9.50 - - - - - - -

650324 (F) 24-R Mounting Pkg 1-3/4" Door 24 - - - - - - -

650329 (F) 24-R Mounting Pkg 2-1/4" Door 16.50 - - - - - - -

650304 24-V Mounting Pkg 1-3/4" - 2-1/4" Door 37 - - - - - - -

650325 F-24-V Mounting Pkg 1-3/4" Door 37 - - - - - - -


650318 24-C Mounting Pkg 1-3/4" Door 24 - - - - - - -


650317 F-24-C Mounting Pkg 1-3/4" Door 24 - - - - - - -


650326 24-CWDC Mounting Pkg 1-3/4" Door 52 - - - - - - -

650298 24-CWDC Mounting Pkg 2-1/4" Door 52 - - - - - - -

650327 F-24-CWDC Mounting Pkg 1-3/4" Door 52 - - - - - - -

060111 Cotter Key 1/8" x 1" (Package of 10) 11.50 - - - - - - -

600320 EL Solenoid Pkg 152 - - - - - - -

600321 EL Plunger Solenoid Pkg 57 - - - - - - -

650203 AE Switch Replacement Kit 132 - - - - - - -

650210 LM Switch Replacement Kit 215 - - - - - - -

650264 DM Switch Replacemen Kit 215 - - - - - - -





Parts - Device Series 24(F) 24 Exit Devices - Latches and Rods US3

SP313 US26 US4Part No. Description Unfinished SP28 US32D US26D US32 US10650389 24-V Top Latch Case 106 – – – – –

650375 F-24-V Top Latch Case 106 – – – – –

650202 24-V Latch Case Cover Kit – 57 57 73 73 73

650336 24-V Latch Case Cover Mounting Pkg – 2.50 2.50 2.50 2.50 2.50

650311 24-V Rod Guide Kit – – 45 – 55 42

650387 24-V Bottom Bolt Guide (Latch cover sold separately) 9 – – – – –

4450 24-V Top Rod Kit – 73 73 73 73 73

610056 24-V Bottom Rod Kit – 100 100 100 100 100

5494 F-24-V Auxiliary Fire Latch Kit (LBR application only) 357 – – – – –

603 24-C, C-WDC Top Latch Case 157 – – – – –

F603 F-24-C Top Latch Case 234 – – – – –

WF603 F-24-CWDC Top Latch Case 234 – 34 43 - 29

650339 (F) 24-C, CWDC Top Latch Release Kit – – 34 43 29 29

4567 24-C Bottom Bolt Guide 40 – – – – –

4835 24-CWDC Bottom Bolt Guide 37 – – – – –

4694 F-24-CWDC Latch Bracket 9 – – – – –

650351 (F) 24-C, CWDC Center Slide Assy 244 – – – – –

4832 (F) 24-CWDC Center Slide Reinforcement Plate 30 – – – – –

610061 (F) 24-C, CWDC Top Rod Kit 73 – – – – –

610057 (F) 24-C, CWDC Bottom Rod Kit 100 – – – – –

5494 F-24-C Auxiliary Fire Latch Kit (LBR application only) 357 – – – – –



25 Device Series - Parts (F) 25 Exit Devices

US10 US4Part No. Description Unfinished US28 US32D 313AN US26D US26 US32 US3650239 25-R Center Case Kit 147 – – – – – – –

650240 F-25-R Center Case Kit 158 - - - - - - -

650242 (F) 25-V Center Case Kit 125 - - - - - - -

650244 (F) 25-C, CWDC Center Case Kit 113 - - - - - - -

650246 (F) 25-M Center Case Kit RHR 125 - - - - - - -

650398 (F) 25-M Center Case Kit LHR 125 - - - - - - -

650255 (F) 25-R Center Case Cover Kit - 106 133 113 131 135 138 146

650257 (F) 25-V Center Case Cover Kit - 106 133 113 131 135 138 146

650259 (F) 25-C, M Center Case Cover Kit - 106 133 113 131 135 138 146

600307 25 Series Center Case Cover Mtg Pkg - 8 8 8 8 8 8 8

650261 25-V/M/C Center Case Housing Kit 16.50 - - - - - - -

600308 25-V/M/C Center Case Housing Screw Pkg 7.50 - - - - - - -

650262 25-V Center Case Finger Kit 31 - - - - - - -

650263 25-C Center Case Finger Kit 21 - - - - - - -

600309 25-V/C Center Case Finger Screw Pkg 8.50 - - - - - - -

650378 25-M Center Case Slide Bar Assy RHR 64 - - - - - - -

650377 25-M Center Case Slide Bar Assy LHR 64 - - - - - - -



650227 F-25 Series Channel Cover 3' - 33 33 33 33 33 33 33

650228 F-25 series Channel Cover 4' - 36 36 36 36 36 36 36









610480 25 Dogging Housing 14.50 - - - - - - -

060109 25 Hex Dogging Key 7/32" (Pkg of 10) 13 - - - - - - -



600305 25 Series Channel Screw (Pkg of 10) 12 - - - - - - -

600310 25 Series Push Bar End Cap Kit - 28 34 29 33 34 35 37

600319 25 Series Push Bar Guide Pkg 9.50 - - - - - - -

650345 (F) 25-R/M Mounting Pkg 1-3/4" Door 16.50 - - - - - - -

650293 (F) 25-R/M Mounting Pkg 2-1/4" Door 16.50 - - - - - - -

650315 25-V Mounting Pkg 1-3/4" - 2-1/4" Door 36 - - - - - - -







650299 (F) 25-CWDC Mounting Pkg 1-3/4" Door 51 - - - - - - -

650296 (F) 25-CWDC Mounting Pkg 2-1/4" Door 51 - - - - - - -

060111 Cotter Key 1/8" x 1" (Package of 10) 11 - - - - - - -

600320 EL Solenoid Pkg 150 - - - - - - -

600321 EL Plunger Solenoid Pkg 56 - - - - - - -

650203 AE Switch Replacement Kit 130 - - - - - - -

650210 LM Switch Replacement Kit 211 - - - - - - -

650264 DM Switch Replacemen Kit 211 - - - - - - -



Parts - Device Series 25(F) 25 Exit Devices - Latches and Rods US3

SP313 US26 US4Part No. Description Unfinished SP28 US32D US26D US32 US10650389 25-V Top Latch Case 106 – – – – –

650375 F-25-V Top Latch Case 106 – – – – –

650202 25-V Latch Case Cover Kit – 57 57 73 73 73

650336 25-V Latch Case Cover Mounting Pkg – 2.50 2.50 2.50 2.50 2.50

650311 25-V Rod Guide Kit – – 45 - 55 42

650387 25-V Bottom Bolt Guide (Latch cover sold separately) 9 – – – – –

3777 25-V Top Rod Kit – 73 73 73 73 73

610055 25-V Bottom Rod Kit – 100 100 100 100 100

5494 F-25-V Auxiliary Fire Latch Kit (LBR application only) 357 – – – – –

603 25-C, C-WDC Top Latch Case 157 – – – – –

F603 F-25-C Top Latch Case 234 – – – – –

WF603 F-25-CWDC Top Latch Case 234 – 34 43 - 29

650339 (F) 25-C, CWDC Top Latch Release Kit – – 34 43 29 29

4567 25-C Bottom Bolt Guide 40 – – – – –

4835 25-CWDC Bottom Bolt Guide 37 - - - - -

4694 F-25-CWDC Latch Bracket 9 – – – – –

650376 (F) 25-C, CWDC Center Slide Assy 244 – – – – –

4832 (F) 25-CWDC Center Slide Reinforcement Plate 30 – – – – –

– – – – –

610061 (F) 25-C, CWDC Top Rod Kit 73 – – – – –

610057 (F) 25-C, CWDC Bottom Rod Kit 100 – – – – –

5494 F-25-C Auxiliary Fire Latch Kit (LBR application only) 357 – – – – –



XX Device Series - Parts (F) XX Exit Devices US3

US4 US10B US26Part No. Description Unfinished US10 US32D US26D US32585 XX-R-EO/TP Center Case 251 – – – –

685 F-XX-R-EO/TP Center Case 405 - - - -

587 XX-V-EO Center Case 167 - - - -

687 F-XX-V-EO Center Case 275 - - - -

582 XX-V-K/L Center Case 209 - - - -

FE582 FSE-XX-V-K/L Center Case 509 - - - -

F582 F-XX-V-K/L Center Case 319 - - - -

583 XX-V-TP Center Case 206 - - - -

F583 F-XX-V-TP Center Case 331 - - - -

591 XX-C Center Case 205 - - - -

691 F-XX-C Center Case 521 - - - -

650145 XX-M Center Case LHR 283 - - - -

650146 XX-M Center Case RHR 283 - - - -

650149 F-XX-M Center Case LHR 283 - - - -

650150 F-XX-M Center Case RHR 283 - - - -

3740 XX-R Center Case Cover - 69 82 98 98

3742 XX-V Center Case Cover - 69 82 98 98

3741 XX-M/C Center Case Cover - 66 81 97 97

650381 XX-M Slide Bar Assy LHR 49 - - - -

650382 XX-M Slide Bar Assy RHR 49 - - - -

607 XX-R Latch Bolt Assembly 59 - - - -

610044 XX-M/V/C Axle Support Housing Assy 66 - - - -

3566 XX-V Locking Cam 9 - - - -

3755 XX-R Knob Cam 31 - - - -

3775 XX-V Knob Cam 31 - - - -

3770 XX-R Main Cam Spring 5.50 - - - -

610070 XX-R Back Plate 72 - - - -

584 XX Series End Case 140 - - - -

684 F-XX Series End Case 240 - - - -

3746 XX Series Lever Arm RH - 52 59 72 72

3747 XX Series Lever Arm LH - 52 59 72 72

3749 XX Series Lever Arm Axle 10 - - - -

3767 XX Series Crossbar - 84 84 84 84

660025 1/4-20 Crossbar Retaining Screw 4.50 - - - -

060109 Hex Dogging Key 7/32" (Pkg of 10) 13 - - - -

060111 Cotter Key 1/8" x 1" (Package of 10) 11 - - - -

650113 XX-R Mounting Package 24 - - - -

650133 F-XX-R Mounting Package 24 - - - -

650332 XX-V Mounting Package 36 - - - -

650134 F-XX-V Mounting Package 36 - - - -

650318 XX-C Mounting Package 24 - - - -

650317 F-XX-C Mounting Package 24 - - - -

650301 F-XX-C-WDC Mounting Package 51 - - - -

650299 XX-C-WDC Mounting Package - 51 51 - -

650137 XX-M Mounting Package 45 - - - -

650138 F-XX-M Mounting Package 45 - - - -

650141 XX-R AMS Mounting Package 24 - - - -

650333 XX-V AMS Mounting Package 36 - - - -

650323 XX-C AMS Mounting Package 24 - - - -

650142 XX-M AMS Mounting Package 45 - - - -



Parts - Series Devices XX F) XX Exit Devices - Latches and Rods US3

US4 US10B US26Part No. Description Unfinished US10 US32D US26D US32650389 XX-V Top Latch Case 106 – – – –

650375 F-XX-V Top Latch Case 106 - - - -

650202 XX-V Latch Case Cover Kit - 52 57 - 73

650311 XX-V Rod Guide Kit - 42 45 - 55

650387 XX-V Bottom Bolt Guide (Latch cover sold separately) 9 - - - -

3777 XX-V Top Rod Kit - 73 73 - 73

610034 XX-V Bottom Rod Kit - 100 100 - 100

5494 F-XX-V Auxiliary Fire Latch Kit (LBR application only) 357 - - - -

603L XX-C Top Latch Case LHR 157 - - - -

603R XX-C Top Latch Case RHR 157 - - - -

F603 F-XX-C, CWDC Top Latch Case 234 - - - -

650339 XX-C Top Latch Release Sub Assembly - - - 44 -

4567 XX-C Bottom Bolt Guide 40 - - - -

4835 XX-CWDC Bottom Bolt Guide 37 - - - -

4694 XX-CWDC Latch Bracket 9 - - - -

610037 XX-C Center Slide Assy 244 - - - -

4832 XX-CWDC Center Slide Reinforcement Plate 30 - - - -

610061 (F) XX-C Top Rod Kit 73 - - - -

610057 (F) XX-C, CWDC Bottom Rod Kit 100 - - - -

5494 F-XX-V Auxiliary Fire Latch Kit (LBR application only) 357 - - - -



8500 Mortise Lock - Parts 8500 Mortise LockPart No. Description Unfinished3518 Dead Lock Arm Spring 5.50

3519 Knob Cam 31

3530 Auxiliary Bolt Actuator 30

3531 Auxiliary Bolt Spring 5.50

3532 Deadlocking Arm 30

3542 Cylinder Operating Arm 30

4067 Locking Arm 32

610042 Locking Arm and Spring Assembly 33

610041 Latch Bolt Assembly 59

Mullion - Parts MullionPart No. Description Unfinished600154 Top Fittings for 4023 Mullion 55

600155 Bottom Fittings for 4023 Mullion 55

600156 Top Fittings for 2923 Mullion 49


060107 Top Fittings for 4423 Mullion 77


4988 Cylinder Removable Mullion Adjustment Shim (1/8" Thick) 30

4965 Cylinder Removable Mullion Top Fitting 81

600153 Stabilizer Blocks with Mounting Screws Pkg/4 32

4966 KR Cylinder Retainer Bracket 9

19 Trim Series - Parts 19 Series TrimPart No. Description Unfinished3894 910TP/911K/912L Cylinder Nut 5.50

600166 910NL Cylinder Mounting Pkg 5.50

4218 912L Washer 3

4268 911K/912L Locking Plate 14

4270 900 Series Hex Stud 3

4275 912L Spring Plate 4

4326 912L Lever Spring 3

600315 920/930 Cylinder Anchor 14

600161 911/912/914 Tailpiece Guide Pkg 6.50

4841 912L Lever Return Spring 5.50



Parts - Trim Series 2424 Series Trim

SP28 US26D US10 US4Part No. Description Unfinished SP313 US32D US26 US32 US34120 710NL, 718C/NL Cylinder Spacer Collar 5.50 – – – – –

4121 710NL, 718C/NL Cylinder Anchor Plate 5.50 - - - - -

4131 718C/NL Cylinder Retaining Bracket 7 - - - - -

4218 712 Lever Washer 3.50 - - - - -

4268 TP/K/L/TL Locking Plate 14.50 - - - - -

4270 700 Series Trim Hex Stud 3.50 - - - - -

4275 712 Spring Plate 14.50 - - - - -

4302 712L-DT Lever Plate 14.50 - - - - -

4326 712 Lever Spring Clip 3 - - - - -

4349 711/712/719 Control Hex Stud 3.50 - - - - -

4605 710/711/712/719 Control Actuator Spring 2 - - - - -

4841 712 Lever Return Spring 5.50 - - - - -

600267 719 Rod Member Pkg - - - 54 - -

600288 717/718/179 Pull Grip Screw Pkg 2.50 - - - - -

610119 711 Knob Assembly - 66 66 66 66 66

650355 712 Dane Lever - 75 75 75 75 75

650356 712 Sutro Lever - 94 94 94 94 94

650358 712 Quantum Lever - 75 75 75 75 75

650366 TP/K/L Actuator Shaft Assembly 24 - - - - -

650313 710TP Retainer Plate 30 - - - - -

650312 711/712-R/V Retainer Plate 36 - - - - -

610205 711/712-C Retainer Plate 1-3/4" 36 - - - - -

610464 711/712-C Retainer Plate 2-1/4" 36 - - - - -

660456 711/712 Washer 2.50 - - - - -

660459 711/712/719 3/8"-16 Locknut 2.50 - - - - -

660471 TP/K/L/TL Solid Rivet 2 - - - - -

650151 715DT MTG PKG 1-3/4" - 11 11 11 11 11

650152 715DT MTG PKG 2-1/4" - 11 11 11 11 11

650153 717DT MTG PKG 1-3/4" - 5.50 5.50 5.50 5.50 5.50

650154 717DT MTG PKG 2-1/4" - 5.50 5.50 5.50 5.50 5.50

650157 710DT MTG PKG 1-3/4" - 5.50 5.50 5.50 5.50 5.50

650158 710DT MTG PKG 2-1/4" - 5.50 5.50 5.50 5.50 5.50

650161 710NL MTG PKG 1-3/4" - 17.50 17.50 17.50 17.50 17.50

650162 710NL MTG PKG 2-1/4" - 17.50 17.50 17.50 17.50 17.50

650165 710TP MTG PKG 1-3/4" - 11 11 11 11 11

650166 710TP MTG PKG 2-1/4" - 11 11 11 11 11

650169 718C/NL-R/V MTG PKG 1-3/4" - 11 11 11 11 11

650170 718C/NL-R/V MTG PKG 2-1/4" - 11 11 11 11 11

650173 718NL-C MTG PKG 1-3/4" - 24 24 24 24 24

650174 718NL-C MTG PKG 2-1/4" - 24 24 24 24 24

650177 718C-CV MTG PKG 1-3/4" - 24 24 24 24 24

650178 718C-CV MTG PKG 2-1/4" - 24 24 24 24 24

650181 718DT MTG PKG 1-3/4" - 5.50 5.50 5.50 5.50 5.50

650182 718DT MTG PKG 2-1/4" - 5.50 5.50 5.50 5.50 5.50

650185 718TP MTG PKG 1-3/4" - 5.50 5.50 5.50 5.50 5.50

650186 718TP MTG PKG 2-1/4" - 5.50 5.50 5.50 5.50 5.50

650189 711/712/719 MTG PKG 1-3/4" 5.50 - - - - -

650190 711/712/719 MTG PKG 2-1/4" 5.50 - - - - -

650193 719TLP MTG PKG 1-3/4" - 11 11 11 11 11

650194 719TLP MTG PKG 2-1/4" - 11 11 11 11 11

For Trims Shipped after 02/28/2011



24 Trim Series - Parts 24 Series Trim

SP28 US26D US10 US4Part No. Description Unfinished SP313 US32D US26 US32 US3

◆ 4131 718C/NL Cylinder Retaining Bracket 6.50 – – – – –◆ 4218 712 Lever Washer 3.50 – – – – –◆ 4268 TP/K/L/TL Locking Plate 14 – – – – –◆ 4275 712 Spring Plate 14 – – – – –◆ 4605 710/711/712/719 Control Actuator Spring 2 – – – – –◆ 4841 712 Lever Return Spring 5.50 – – – – –◆ 600267 719 Rod Member Pkg – 52 52 52 52 52◆ 610119 711 Knob Assembly – 63 63 63 63 63◆ 650355 712 Dane Lever – 72 72 72 72 72◆ 650356 712 Sutro Lever – 72 72 72 72 72◆ 650358 712 Quantum Lever – 72 72 72 72 72◆ 650313 710TP Retainer Clip 29 – – – – –◆ 650312 711/712-R/V Retainer Plate 35 – – – – –◆ 610205 711/712-C Retainer Plate 1-3/4" 35 – – – – –◆ 610464 711/712-C Retainer Plate 2-1/4" 35 – – – – –◆ 060124 711/712/719 3/8" - 16 Locknut (Package of 10) 4.50 – – – – –◆ 660471 TP/K/L/TL Solid Rivet 2 – – – – –◆ 650157 710DT Mounting Package 1-3/4" – 5.50 5.50 – 5.50 –◆ 650158 710DT Mounting Package 2-1/4" – 5.50 5.50 – 5.50 –◆ 650161 710NL Mounting Package 1-3/4" – 17 17 – 17 –◆ 650162 710NL Mounting Package 2-1/4" – 17 17 – 17 –◆ 650165 710TP Mounting Package 1-3/4" – 10.50 10.50 – 10.50 –◆ 650166 710TP Mounting Package 2-1/4" – 10.50 10.50 – 10.50 –◆ 650173 718NL-C Mounting Package 1-3/4" – 23 23 – 23 –◆ 650174 718NL-C Mounting Package 2-1/4" – 23 23 – 23 –◆ 650177 718C-CV Mounting Package 1-3/4" – 23 23 – 23 –◆ 650178 718C-CV Mounting Package 2-1/4" – 23 23 – 23 –◆ 650185 718TP Mounting Package 1-3/4" – 5.50 5.50 – 5.50 –◆ 650186 718TP Mounting Package 2-1/4" – 5.50 5.50 – 5.50 –◆ 650193 719TP Mounting Package 1-3/4" – 10.50 10.50 – 10.50 –◆ 650194 719TP Mounting Package 2-1/4" – 10.50 10.50 – 10.50 –

◆ For Trims shipped before 02/25/2011



Parts - Trim Series 2525 Series Trim

US26D US4 US3Part No. Description Unfinished SP28 SP313 US32D US10 US32 US26600272 510 Backplate Assembly 22 – – – – – –

600273 510/512/513 Slider 63 – – – – – –

600282 511L Slider Assy 145 – – – – – –

090041 Hook Spring Pkg 7 – – – – – –

600274 510/511L Spring (Package of 2) 16.50 – – – – – –

600284 512TP/513K Spring (Package of 2) 10 – – – – – –

600275 510L/512TP/513K Locking Hook 22 – – – – – –

600281 510L-NL/512NL/513K-NL Cam 25 – – – – – –

600276 L/K Spindle Cam Kit 25 – – – – – –

600280 L-NL/L-DT Spindle Cam Kit 27 – – – – – –

600277 510/511/513 Spindle Cam Retaining Ring (Pkg of 10) 8 – – – – – –

650267 510L/513K Shear Pin (Package of 10) 20 – – – – – –

600283 511L Shear Pin (Package of 5) 8 – – – – – –

600278 500 Series Cylinder Lock Nut 9.50 – – – – – –

600279 500 Series Cylinder Nut Tool 15.50 – – – – – –

600296 500 Series Security Collar – 20 20 24 24 25 26

600289 Lower Pull Bracket Kit 1.3/4" – 13 11 13 13 13 15

600290 Lower Pull Bracket Kit 2.1/4" – 13 11 13 13 13 15

600285 512TP Thumbpiece – 29 31 36 37 37 40

600286 512TP Thumbpiece Pivot Pin 7 – – – – – –

600287 512TP Thumbpiece Bracket 11 – – – – – –

600297 512TP Pull – 115 123 144 147 150 158

600298 513K Knob Assy – 114 121 142 146 148 157

600299 510L Dane Lever Kit – 84 89 106 108 110 116

600300 510L Sutro Lever Kit – 84 89 106 108 110 116

600301 510L Quantum Lever Kit – 84 89 106 108 110 116

600302 511L Dane Lever Kit – 84 89 106 108 110 116

600303 511L Sutro Lever Kit – 84 89 106 108 110 116

600304 511L Quantum Lever Kit – 84 89 106 108 110 116

600288 Pull Grip Screw (Package of 10) 9 – – – – – –

650231 512 Mounting Pkg 1-3/4" 3.50 – – – – – –

650232 512 Mounting Pkg 2-1/4" 3.50 – – – – – –

650235 510/511/512/513 Screw Pkg 1-3/4" 2.50 – – – – – –

650237 510/511/512/513 Screw Pkg 2-1/4" 2.50 – – – – – –

600293 FSA/FSE Solenoid Kit 17.50 – – – – – –

600294 FSA/FSE Solenoid Plunger 121 – – – – – –

600295 FSA/FSE Pivot Pin 2 – – – – – –

650278 FSA/FSE Solenoid Spring 4.50 – – – – – –



Part No. Description List Price650277 24/25 Maintenance Kit 1565

Refill Parts/Packages Refill New KitList Price Contents

Part No. Description Each Qty299 Strike 299 Strike US19 47 5

325 SNB 325 Sex Bolt, 1/4-20 US32D (Package of 2) 16.50 10

425 SNB 425 Sex Bolt, 10-24 US32D (Package of 2) 16.50 10

3894 Cylinder Nut 6 10

4208 CD/EA/KOR Cylinder Retaining Bracket 7 30

060126 512/718 Lever Washer (Package of 10) 5.50 1

4275 712 Spring Plate 15.50 10

4326 712/912 Lever Spring Clip 3.50 10

4841 712/912 Lever Return Spring 5.50 10

650311 Rod Guide Kit US32D 45 6

650311 Rod Guide Kit SP28 45 2

650311 Rod Guide Kit SP313 45 2

060109 Hex Dogging Key 7/32" (Package of 10) 13 1

650231 512 Mtg Pkg US4 1-3/4" Dr 7 2

650231 512 Mtg Pkg US10B 1-3/4" Dr 2.50 2

650231 512 Mtg Pkg US26D 1-3/4" Dr 2.50 6

650294 24/25 End Cap Kit US32D 1-3/4" Dr. 32 6

650294 24/25 End Cap Kit US26D 1-3/4" Dr. 31 2

650294 24/25 End Cap Kit SP28 1-3/4" Dr. 26 1

650294 24/25 End Cap Kit SP313 1-3/4" Dr. 26 1

600283 511 Trim Shear Pin (Package of 5) 2.50 6

640001 24 Device Plastic Mounting Template 2.50 2

640002 25 Device Plastic Mounting Template 2.50 2

650267 510/513 Trim Shear Pin (Package of 10) 20 3

060112 8500 Lock Housing Screws (Package of 10) 4.50 2

060113 24/25-C Latch Screw (Package of 10) 4.50 5

060114 Rod Guide Screws (Package of 10) 4.50 3

060119 510/511/512/513 Back Plate Screws (Package of 10) 4.50 5

600309 25 Lift Finger Screws (Package of 2) 8.50 10

600173 8500 Lock Face Screws US3/US4/US10 2.50 10

600173 8500 Lock Face Screws US26D/US32D 2.50 10

600173 8500 Lock Face Screws US10B 2.50 10

060120 8500 Lock Backplate Screws (Package of 10) 4.50 5

060121 24/25-V Latch Cover Screws US26D/US32D/US28 (Package of 10) 4.50 5

060121 24/25-V Latch Cover Screws US3/US4/US10 (Package of 10) 4.50 5

060121 24/25-V Latch Cover Screws US10B (Package of 10) 4.50 5

060123 Electric Option Dogging Screw (Package of 10) 4.50 5

060122 K-NL/L-NL Spindle Cam Screw (Package of 10) 9.50 2

060124 K/L/TL Trim Lock Nut (Package of 10) 4.50 1

600305 24/25 Channel Screw (Package of 10) 12 3

060111 Cotter Key 1/8" x 1" (Package of 10) 11 5

600279 Cylinder Nut Tool (package of 5) 15.50 2

060125 FSE/FSE Trim Pivot Pin (Package of 10) 4.50 2

600319 24/25 Pushbar Guide (Package of 2) 9.50 10

600278 25 Trim Cylinder Locknut 9.50 10

060117 25 Center Case Mtg Screws (Package of 10) 4.50 5

060118 24 Center Case Housing Screws (Package of 10) 4.50 5

060116 25-R/M Device Mounting Screws (Package of 10) 5.50 5

Parts Maintenance Kit

◆

◆

◆

◆

060115 FSA/FSE Trim Screws (Package of 10) 4.50 5

600307 24/25 Center Case Cover Screws US3 (Package of 4) 8 12



600307 24/25 Center Case Cover Screws 31AN (Package of 4) 8 12

600307 24/25 Center Case Cover Screws US26D/US32D/SP28 (Package of 4) 8 12

600277 510/513 Spindle Cam Ret. Ring (Package of 10) 2.50 2

600308 25 Housing Plate Screws (Package of 2) 7.50 2

970321 299 Strike Shim 8.50 20

◆ For Trims shipped before 02/25/2011



(continued) Parts Maintenance Kit

Refill Parts/PackagesRefill New Kit

List Price ContentsPart No. Description Each Qty



Numerical IndexPart No. Page

582 62583 62584 62585 62587 62

591 62603 59,61607 62684 62685 62

687 62691 623518 643519 643530 64

3531 643532 643542 643566 623722 57

3740 623741 623742 623746 623747 62

3749 623755 623767 623770 623775 62

3777 61,633894 644067 644107 574108 57

4120 654121 654131 654218 64,654268 64,65

4270 64,654275 64,654286 574288 574302 65

Part No. Page

4326 64,654349 654450 594567 59,61,634605 65

4694 59,61,634832 59,61,634835 59,61,634841 64,654965 64

4966 644988 645494 57,59,61,63060111 58600153 64

4326 64,654349 654450 594567 59,61,634605 65

4694 59,61,634832 59,61,634835 59,61,634841 64,654965 64

4966 644988 645494 57,59,61,63060111 58600153 64

600154 64600155 64600156 64600161 64600166 64

600267 65600272 66600273 66600274 66600275 66

600276 66600277 66600278 66600279 66600280 66

Part No. Page

600281 66600282 66600283 66600284 66600285 66

600286 66600287 66600288 65,66600289 66600290 66

600293 66600294 66600295 66600296 66600297 66

600298 66600299 66600300 66600301 66600302 66

600303 66600304 66600305 58,60600307 58,60600308 60

600309 60600310 58,60600315 64600319 58,60600320 58,60

600321 58,60610034 63610037 63610041 64610042 64

610044 62610045 57610055 61610056 59610057 59,61,63

610061 59,61,63610070 62610119 65610205 65610464 65

Part No. Page

610480 57,58,60650113 62650117 58650119 60650120 60

650121 58650122 58650131 58650132 58650133 62

650134 62650135 60650136 60650137 62650138 62

650139 58650140 58650141 62650142 62650143 60

650144 60650145 62650146 62650149 62650150 62

650151 65650152 65650153 65650154 65650157 65

650158 65650161 65650162 65650165 65650166 65

650169 65650170 65650173 65650174 65650177 65

650178 65650181 65650182 65650185 65650186 65



Numerical IndexPart No. Page

650187 58650188 58650189 65650190 65650191 60

650192 60650193 65650194 65650201 58650202 59,61,63

650203 58,60650210 58,60650227 60650228 60650231 66

650232 66650233 58650234 58650235 66650236 58

650237 66650238 58650239 60650240 60650242 60

650244 60650246 60650247 58650249 58650251 58

650253 58650255 60650257 60650259 60650261 60

650262 60650263 60650264 58,60,66650267 66650278 60

650293 58650294 60650295 60650296 57650297 58

Part No. Page

650298 60650299 58,62650300 60,62650301 57650303 58

650304 57650307 57650308 57650309 59650311 61,63,65

650312 65650313 60650315 60650316 58650317 58,60,62,

650318 57,60,62650320 62650323 58650324 58650325 58

650326 58650327 57650328 57650329 57,58650330 57

650331 62650332 62650333 57650334 59650336 57,61

650337 57650338 59650339 57,61,63650343 60650345 58

650346 58.6650348 59,60650351 65650355 65650356 65

650358 65650366 57650374 59650375 61,63650376 60

Part No. Page

650377 60650378 62650381 62650382 57650384 57

650385 57650386 57650387 57,59,61,63650388 57650389 57,59,61,63

650390 57650391 57650392 57650393 60650398 62

660025 65660456 65660459 65660471 58661408 58

661409 60661412 60661413 64060105 64060107 64

060108 57060109 57,58,60,62060110 60060111 62,66090041 63

603L 63603R 62F582 62F583 59F603 61,62,63

FE582 59WF603 57,61

Part No. Page



Notes

1



Phone: 877-671-7011 (Press 1, then 6) • FAX: 1-800-288-4242email: [email protected]

Table of ContentsDevices1990 Series .............................................................................32090 Series .............................................................................41490 Series .............................................................................51590 Series .............................................................................61690 Series .............................................................................71790 Series .............................................................................82390 Series .............................................................................9Power Supply, Electric Power Transfer.................................10Lever Control, Offset Pull, Cylinders.....................................11Cylinder Assemblies/Retractors/Risers ................................11Mullions/Strikes.....................................................................12

Parts1990 Series......................................................................13-15Crossbar Devices..................................................................162090 Series......................................................................17-201490/1590 Series............................................................ 21-24EL1490/1590 Series ........................................................25-261490 Series Rod Assembly...................................................271490/1590 Series Cylinder Assembly ...................................281690 Series......................................................................29-311790 Series......................................................................32-332390 Series......................................................................34-362390 Series Cylinder Assembly ............................................37Strike/Mullion/Trim ................................................................37

IndexIndex by Model Number .......................................................39Index by Part Number .....................................................40-41

Finish ListU.S. Standard BHMA Description

US28 628 Anodized Aluminum – ClearDC13 710 Anodized Aluminum – Dark Bronze DC35 711 Anodized Aluminum – BlackP28 689 Painted Aluminum – SilverP13 695 Painted Aluminum – Dark BronzeP35 622 Painted Aluminum – BlackUS3 666 Bright BrassUS4 667 Satin BrassUS9 705 Bright BronzeUS10 668 Satin BronzeUS10B 703 Oxidized Satin BronzeUS14 669 Bright NickelUS15 670 Satin NickelUS26 672 Bright ChromeUS26D 702 Satin Chrome

Consult factory for availability of other finishes.

Please refer to IRFASTTRACK Price Book for products available in 24-hours or 5-days.

1-877-671-7011 (Press 1, then 6)Fax: 1-800-288-4242Email: [email protected]

2

Prices subject to change without noticePhone: 877-671-7011 (Press 1, then 6) • FAX: 1-800-288-4242

email: [email protected]



Phone: 877-671-7011 (Press 1, then 6) • FAX: 1-800-288-4242email: [email protected] Prices subject to change without notice

1990 SeriesDevices are priced for 3´8˝ x 7´, Aluminum or Hollow Metal Doors.Hex Bottom Latch furnished standard.(Price includes PB48 Strike)

P13, US3, US26, US14,Model No. P28 P35 US10 US4 US26D US15 Standard Trim

1990EO 426 438 987 1072 1072 1426 –1991DT 584 596 1285 1381 1432 1786 9970 Pull1992NL-OP/HB-OP 472 484 1033 1118 1118 1472 Rim Cylinder only1993NL/HB 630 642 1331 1427 1478 1832 9970 w/Rim Cylinder

Optional LatchesSuffix List Add

RL Rod Bottom Latch 25PL Pullman Bottom Latch 26ES Top Latch for use with Electric Strikes 30

(Device Furnished LBR - Less Bottom Rod - Less Strike, Deduct $21.00 List)

Door Heights over 7'List Add

Up to 8' 57Up to 9' 75Up to 10' 86

CrossbarCrossbar furnished 41" standard - Easily Cut for Job Fitting List Add

Extra Length Crossbar - 48" (Fits Door Width up to 51") - P28, P13, P35 finishes 17Extra Length Crossbar - 48" (Fits Door Width up to 51") - Architectural finishes 27Less Crossbar (Deduct) 109

REFERENCE NOTES:Specify if Door Material other than Aluminum. Not recommended for use on wood doors.

Concealed Vertical RodCrossbar Exit Devices

4




Rim TypeCrossbar Exit Devices

2090 SeriesDevices are priced for 3'8", Aluminum or Hollow Metal Doors.(Price includes SD36 Strike)

Handed - Not Reversible

P13, US3, US26, US14,Model No. P28 P35 US10 US4 US26D US15 Standard Trim

2090EO 361 376 926 1004 1004 1322 –2091DT 519 534 1224 1313 1364 1682 9970 Pull2092NL-OP/HB-OP 407 422 972 1050 1050 1368 Rim Cylinder only2093NL/HB 565 580 1270 1359 1410 1728 9970 w/Rim Cylinder

CrossbarCrossbar furnished 41" standard - Easily Cut for Job Fitting List Add

Extra Length Crossbar - 48" (Fits Door Width up to 51") - P28, P13, P35 Finishes 17Extra Length Crossbar - 48" (Fits Door Width up to 51") - Architectural Finishes 27Less Crossbar (Deduct) 109

REFERENCE NOTES:Specify Handing RHR or LHR. Not Reversible.Specify if Door Material other than Aluminum.

Concealed Vertical RodTouchbar Exit Devices



1490 SeriesDevices are priced for 36" x 7',Aluminum or Hollow Metal Doors.RL Bottom Latch furnished standard.(Price includes PB48 Strike.)

▲ ▲ ▲DC13, US3, US4, US14,

Model No. US28 DC35 US10 US10B US15 Standard Trim

1490EO 721 740 1540 1584 1584 -1491DT 879 898 1838 1893 1944 9970 Pull1492NL-OP 809 828 1628 1672 1672 ★ 149CA-NL

w/Rim Cylinder1493HB-OP 809 828 1628 1672 1672 ★ 149CA-HB

w/Rim Cylinder1494NL-P 967 986 1926 1981 2032 9970 Pull

★ 149CA-NL w/Rim Cylinder

1495HB-P 967 986 1926 1981 2032 9970 Pull ★ 149CA-HB w/Rim Cylinder

1498 504 504 1327 1327 1327 -

REFERENCE NOTES:

Specify Handing RHR or LHR.Specify if Door Material other than Aluminum. Not recommended for use on wood doors.Device furnished RHR standard when handing is not specified. Both RHR and LHR labels are provided.Device size furnished standard 36" for 7' door height if not specified.Cylinders are included in price for NL and HB functions.

▲ Channel extrusion furnished in DC35 for US3, US4, US10, US10B, US14 and US15 finishes.★ Cylinder assembly furnished in DC35 finish, unless specified. Available finishes DC13, US28 & DC35.

PUSH

1490 Device OptionsList Add

Extra Length 42” 1490 Device 3648” 1490 Device 75

Extra Length 42” 1498 Device 1848” 1498 Device 25

Extension Rods For Door Heights over 7' up to 10' 96Door Thickness For Doors greater than 1 3/4" up to 2 1/4" 20

using cylinder assemblyRim Cylinder For Door with cylinder assembly 467 Pin Cylinder Assembly For Door with cylinder assembly and using 7 pin cylinder 20Risers (1/2") Specify device “x Riser” (example 1490EO x 36" x US28 x Riser) 81Centerlines Change from 40 9/16" standard Device Centerline 96HH Hurricane Device. Available up to 8' device only. Prefix device “HH” 17Signal Switch Base Exit Device unit modified with signal switch (SPDT) 361

indicating latch condition. Prefix device "S".Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction 823

and Signal Switch (SPDT). Prefix device "EL".

REFERENCE NOTES:

✹ One PS914 x 900-2RS minimum requirement to power one or two EL devices. See page 10 for power supply requirements and options.

✹


Rim Type Touchbar Exit Devices


1590 SeriesDevices are priced 36",Aluminum or Hollow Metal Doors.(Price includes TD35 Strike. Retractors included with device specified with cylinder operation.)

▲ ▲ ▲DC13, US3, US4, US14,

Model No. US28 DC35 US10 US10B US15 Standard Trim

1590EO 605 627 1428 1468 1468 -1591DT 763 785 1726 1777 1828 9970 Pull1592NL-OP 693 715 1516 1556 1556 ★ 159CA-NL

w/Rim Cylinder1593HB-OP 693 715 1516 1556 1556 ★ 159CA-HB

w/Rim Cylinder1594NL-P 851 873 1814 1865 1916 9970 Pull

★ 159CA-NL w/Rim Cylinder

1595HB-P 851 873 1814 1865 1916 9970 Pull ★ 159CA-HB w/Rim Cylinder

REFERENCE NOTES:

Specify if Door Material other than Aluminum.Device furnished non-handed with RHR and LHR Pushbar labels for field installation.Device size furnished standard 36" if not specified.Cylinders are included in price on NL and HB functions.Specify if used on pair of doors with Mullion.

▲ Channel extrusion furnished in DC35 for US3, US4, US10, US10B, US14 and US15 finishes.★ Cylinder assembly furnished in DC35 finish, unless specified. Available finishes DC13, US28 & DC35.

PUSH

●

●

●

●


Matching Dummy Touchbar Specify 1498 series. Refer to page 5 for pricing. –Extra Length 42" 1590 Device 36

48” 1590 Device 75Door Thickness For Doors greater than 1 3/4" up to 2 1/4" 20

using cylinder assemblyRim Cylinder For Door with cylinder assembly 467 Pin Cylinder Assembly For Door with cylinder assembly and using 7 pin cylinder 20Risers (1/2") Specify device "x Riser" (example 1590EO x 36" x US28 x Riser) 81Signal Switch Base Exit Device unit modified with signal switch (SPDT) 361

indicating latch condition. Prefix device “S”.

Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction 823and Signal Switch (SPDT). Prefix device “EL”.

REFERENCE NOTES:


✹

●


Concealed Vertical RodPushpad Exit Devices



1690 SeriesDevices are priced for 30", 36" x 7', Aluminum or Hollow Metal Doors.Hex Bottom Latch furnished standard.(Price includes PB48 Strike)

DC13,Model No. US28 DC35 US3 US10 US26 US26D Standard Trim

1690EO 436 464 567 546 567 546 –1691DT 594 622 865 844 927 906 9970 Pull1692NL-OP/HB-OP 482 510 613 592 613 592 169CA

w/Rim Cylinder1694NL-P/HB-P 640 668 911 890 973 952 9970 Pull

169CAw/Rim Cylinder

REFERENCE NOTES:

Devices are supplied 36" x 7' standard, if not specified.

Extra LengthList Add

42" 1748" 27


RL Rod Bottom Latch 25PL Pullman Bottom Latch 26ES Top Latch for use with Electric Strikes 30

(Device Furnished LBR - Less Bottom Rod - Less Strike, deduct $21 List)

Less Rods For retrofit of 1990 crossbar device (Deduct) 45

Door Heights over 7'List Add

Up to 8' 57Up to 9' 75Up to 10' 86


RX Switch Base Exit Device unit modified Request to Exit Switch 198monitoring pushpad. Prefix device "RX".

Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction. 530Prefix device "EL".

Electric Dogging Base Exit Device unit modified with Electric Dogging 530Prefix device "ED".

REFERENCE NOTES:


■ For EL1690 Door widths other than the standard size (30˝, 36˝, 42˝ or 48˝), please specify exact door width.

✹ ■

✹ ■

▲ Device must be ordered with EL option. Conversion kits not available.

▲

Rim TypePushpad Exit Devices



1790 SeriesDevices are priced for 30" and 36", Aluminum or Hollow Metal Doors.(Price includes TD35 Strike)

DC13,Model No. US28 DC35 US3 US10 US26 US26D Standard Trim

1790EO 400 427 530 511 530 511 –1791DT 558 586 688 669 688 669 9970 Pull1792NL-OP/HB-OP 446 473 576 557 576 557 179CA

w/Rim Cylinder1794NL-P/HB-P 604 631 734 715 936 715 9970 Pull

179CAw/Rim Cylinder

REFERENCE NOTES:

Devices are supplied 36" x 7' standard, if not specified.

Extra LengthList Add

42" 1748" 27



Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction. 530Prefix device "EL".

Electric Dogging Base Exit Device unit modified with Electric Dogging 530Prefix device "ED".

REFERENCE NOTES:


■ For EL1790 Door widths other than the standard size (30˝, 36˝, 42˝ or 48˝), please specify exact door width.

Lever ControlP28, US3,P13, US10,P35 US32D

179L Lever Control 276 307179L-BE Lever Control, Blank Escutcheon 276 307179L-NL Lever Control, Night Latch 276 307

REFERENCE NOTES:

Trims are handed. Specify handing RHR or LHR.

✹ ■

✹ ■



▲

Concealed Vertical RodMid-Panel Exit Devices



2390 SeriesDevices are priced for 42", 48" x 7', Aluminum Doors.Hex Bottom Latch furnished standard.(Price includes PB48 Strike)

DC13,Device Fits Door DC35,

Model No. Size Opening US28 CHAMPAGNE Standard Trim

2390EO 21" up to 42" 662 680 –2390EO 24" up to 48" 707 725 –2392NL/HB-OP 21" up to 42" 818 836 Mortise Cylinder Assy with Cylinder 2392NL/HB-OP 24" up to 48" 863 881 Mortise Cylinder Assy with Cylinder 2395NL/HB-OP 21" up to 42" 756 774 Mortise Cylinder Assy less Cylinder 2395NL/HB-OP 24" up to 48" 801 818 Mortise Cylinder Assy less Cylinder 2398 Dummy 21" up to 42" 364 386 –2398 Dummy 24" up to 48" 394 416 –REFERENCE NOTES:

Must specify centerline of device.

Optional Cylinder KitList Add

239CA NL/HB Kit Less Cylinder 94231CA NL/HB Kit Less Cylinder w/ Schlage Cam B502-191 973215 Mortise Cylinder 622" Door Kit For Cylinder Operation 35


RL Rod Bottom Latch 25PL Pullman Bottom Latch 26ES Top Latch for use with Electric Strike 30

(Device furnished LBR - Less Bottom Rod - Less Strike, deduct $21 List)

AccessoriesList Add

Long Top Rod For Door Height from 7’ to 8’ 22Top Rod with Extension For Door Height from 8’ to 9’ 75Top Rod with Extension For Door Height from 9’ to 10’ 86Extension Rod Kit For Door Height 7’ to 10’ Field Installation 118Channel with Up to 42 ˝ Door, 37 1/2˝ Channel US28 831/4˝ Glass Stops DC13, DC35, Champagne 94

Up to 48 ˝ Door, 43 1/2˝ Channel US28 87DC13, DC35, Champagne 126

Filler Plate Up to 42 ˝ Door, 16 1/2 ˝ Filler Plate US28 24DC13, DC35, Champagne 26

Up to 48˝ Door, 19 1/2˝ Filler Plate US28 25DC13, DC35, Champagne 27

REFERENCE NOTES:Rod Length requirement varies with device mounting height.



Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction. 530Prefix device "EL". See Page 10 for Power Supply Requirements.

■

■

■

■


▲



Power SupplyElectric Power TransferAll PS900 Series power supplies and option boards have been tested and certified to meet UL294.

EL Power SupplyModel No. Description List Price

PS914 4 AMP High Inrush Base List 593

REFERENCE NOTES:When specifying PS914 power supply for use with “EL” Electric Latch Retraction devices, the 2RS board is furnished when board option not specified. One PS914 x 900-2RS minimum requirement to power one or two EL devices.

Option BoardsModel No. Suffix Description List Add

900-2RS x2RS 2 Relay Output (PS914 ONLY) 145900-4R x4R 4 Relay Output 140900-BBK Battery Backup Board and Batteries 200

REFERENCE NOTES:PS914 can have a combination of one or two option boards.For field installation, use model number. Example: 900-2RS.

Power Supply OverviewInstallation has been simplified in the PS900 series of Power Supplies by utilizing a flat mounting design and polarized lockingconnectors for option boards. This new design eliminates the need for racks and side connectors. The flat mounting of theoption boards also provides for easier access to the terminal blocks for connection of electrified devices (such as electrifiedpanic devices, strikes, card readers, etc.) Common to the line of PS900 Series power supplies is a constant output rating at both12v and 24v settings, universal 120 VAC to 240 VAC input, and polarized option board connectors. New fire alarm interfaceboard mounting allows outputs to be configured as switched (power cut) or unswitched (power continues) when signal provided.

Electric Power TransferSP28,

Model No. Description SP313

EPT10 Ten 24 gauge wires. 24VDC 1 ampere. 467

REFERENCE NOTES:▲ Refer to Von Duprin price book for current pricing of these items.

▲

▲

▲




Lever Control

P28, US3,P13, US10,

Model No. P35 US32D

179L Lever Control 276 307179L-BE Lever Control - Blank Escutcheon 276 307179L-NL Lever Control - Night Latch 276 307

REFERENCE NOTES:

Lever Controls are Handed. Specify handing RHR or LHR.

Offset PullCan be used with all devices except 2390 series. DC13, US3, US4, US26,

Model No. US28 DC35 US10 US10B US26D

9970 Pull 158 158 298 309 360

CylindersUS28, US26D,DC13, US4, US10B,

Model No. DC35 US10 315AN

PB8 Rim Cylinder 46 46 -3215 Mortise Cylinder - - 62

Cylinder AssemblyUS28,DC13,

Model No. DC35

149CA-NL Cylinder Assembly Less Cylinder 42149CA-HB Cylinder Assembly Less Cylinder 42159CA-NL Cylinder Assembly Less Cylinder 42159CA-HB Cylinder Assembly Less Cylinder 42169CA Cylinder Assembly Less Cylinder 28179CA Cylinder Assembly Less Cylinder 28239CA Cylinder Assembly Less Cylinder 94231CA Cylinder Assembly Less Cylinder w/ Schlage Cam B502-191 97

REFERENCE NOTES:Door Thickness greater than 1 3/4" up to 2 1/4", add $20 list.7 Pin Cylinder applications, add $20 list.With Cylinder Add $62 list for 2390 and add $46 list for other cylinder assembly.Retractors required for cylinder operation are sold separately below.

RetractorsFor field conversion of 1590 inactive device to NL or HB functions.

Model No. List Price

RTR10 1590 Retractor Single Door 14RTR11 1590 Retractor Single Door with Riser 14RTR12 1590 Retractor Pair with Mullion 1 3/4" Door 14RTR13 1590 Retractor Pair with Mullion 2 1/4" Door 14RTR14 1590RL Retractor 1 3/4" Door 82RTR15 1590RL Retractor 2 1/4" Door 82

Risers

Model No. List Price

RSR1490 1490 Riser Pkg 81RSR1590 1590 Riser Pkg 81

▲

▲

▲



MullionsAluminum Removable Mullions shipped complete with mounting brackets, screws, stabilizersand adjustable mortise strike.

For Openings Up to:

RM70(2090 Rim Devices) DC13,

US28 DC35

7'2" 667 7068'2" 717 7599'2" 769 81010'2" 824 864

RM150 (1590 Rim Device)

7'2" 678 7178'2" 732 7719'2" 786 82710'2" 839 881

RM170(1790 Rim Device)

7'2" 667 7068'2" 717 7599'2" 769 81010'2" 824 864

Mullion Stabilizer525 Mullion Stabilizers (set of 2) 40 44

REFERENCE NOTES:For use on doors with stiles as narrow as 1 1/4", reinforced with steel insertions.Blank Mullions (without strike preparation) are available at the same price as standard Mullions.

StrikesStrikes - Concealed Vertical Rod P28 P13 P35 US32D

PB48 Top strike for 1990/1490/1690/2390 devices – 21 21 21

Strikes - Rim

STK45 Strike for inactive leaf, pr of drs with 1590/1790/2090 devices – – 75 –SD35 Strike for 1/3" x 1/2" blade stop, 2090 device. 73 73 73 –SD36 Strike for all stops, 2090 device. 73 73 73 –TD35 Strike for single doors, 1590 or 1790 device. – – 107 –

Strikes - Mullions

STK70 Adjustable mortise strikes (pair). – – – 113STK150 Adjustable mortise strikes (pair). – – – 113STK170 Adjustable mortise strikes (pair). – – – 113

REFERENCE NOTES:The RD64 strike has been discontinued. The Von Duprin 264 strike can be used for applications previously requiring the RD64.The RD43 & RD44 strikes have been discontinued. The Von Duprin 1609 strike can be used for applications previously requiring the RD43 or RD44.


Exploded View And Parts List



2524

18

10

11

6

13

11

27

28

5

12

33

21

34 38

2

17

4

3

16

29

7

32

36

39

30

37

29

20

35 38

17

14

8

31

22

10

18

33

26

10

23

10

31

8

9

LEFT HAND REVERSE SHOWN

4

4

1990 Series(For Devices Furnished After 5/1/77)

Left Hand Reverse Shown


Model Pkg List No. Description Part No. Finish Qty Price

2 PB2 Case Mounting Stud STUD.101 - 10 22.003 PB3 Bearing Bushing BUSH.109 - 10 19.004 PB4 Retaining Ring .250 RRING.109 - 25 15.005 PB5 Pinion Cam CAM.102 - 10 106.00

PB140 Pinion Cam 4270903177 - each 15.006 PB10 Cylinder Bushing BUSH.102 - 10 19.007 PB12 1/4-20 1" FPHTC Typ 23 SCREW.1027 US32D 10 30.00

PB12 1/4-20 1" FPHTC Typ 23 SCREW.1015 BLACK 10 30.008 PB13 990 Axle Pin PIN.106 US32D 10 98.00

PB15 1990 Axle Pin PIN.115 - 10 98.009 PB14 Dog Screw SCREW.1022 - 25 85.0010 PB17 10-32 1/4" UFPHMS SCREW.1028 US32D 10 17.00

PB17 10-32 1/4" UFPHMS SCREW.1029 BLACK 10 17.00





11 PB23 Rod Jam Nut NUT.101 – 10 17.0012 ■ PB24 SU/PL/ES/RL Rod 4270100017 – each 27.00

SU/PL/ES/RL Rod-1/4" Insulclad 7’ 4270102427 – each 27.00SU/PL/ES/RL Rod-1/4" Insulclad 8’ 4270102426 – each 84.00

13 PB25 Hex Bottom Rod 4270101825 – each 27.0014 PB30 Allen Wrench WRENCH.101 – 10 12.5016 PB35 Rod Retractor RETRACT.101 – 10 43.0017 PB38 1/4-20 3/8" Hex Soc Set SCREW.1030 US32D 25 24.00

PB38 1/4-20 3/8" Hex Soc Set SCREW.1039 BLACK 25 24.0018 PB54 Latch Mtg Bracket Kit-HMD BRKTASY.101 – each 37.0021 PB88 Lift Bracket Assembly 4270100013 – each 18.0022 PB99 Hex Dogging Key KEY.101 – 10 30.0023 ● PB129 RL Bottom Latch 4270100521 – each 73.0024 ● PB130 SU Top Latch 4270101806 – each 85.0025 ● PB131 ES Top Latch 4270100346 – each 100.0026 ● PB132 PL Bottom Latch 4270101482 – each 73.0027 PB133 Hex Bottom Bolt 4270101830 – each 32.0028 PB134 Hex Rod Guide Assembly 4270107176 US32D each 31.00

PB134 Hex Rod Guide Assembly 4270107178 P35 each 31.00Hex Rod Guide Screws SCREW.1076 US28 10 6.50Hex Rod Guide Screws SCREW.1081 DC13/DC35 10 6.50ES Latch Pin PIN.110 – 10 16.00Case Retainer RETAIN.101 – 10 18.00SU/ES/PL/HH Latch Spirol Pin PIN.109 – 10 13.00Crossbar Tie Rod 4270100312 – each 55.00End Case Retaining Ring RRING.103 – 25 9.00

▲ RD9 Old Style Tension Spring SPRING.102 – 10 27.0029 RD10 Spring Pin PIN.104 – 10 17.0030 SD9 Tension Spring SPRING.103 – 10 24.0031 SD43 Axle Bushing BUSH.103 – 25 24.0032 SD45 Spring Retainer RETAIN.102 – 25 15.0033 SR33 10-32 3/8" FPHMS SCREW.1037 – 25 15.00

● RA1 SU Top Rod Assembly 7' Dr 4270106632 – each 115.00● RA2 SU Top Rod Assembly 8' Dr 4270106633 – each 174.00● RA3 SU Top Rod Assembly 9' Dr 4270101818 – each 187.00● RA4 SU Top Rod Assembly 10' Dr 4270101819 – each 204.00● RA5 ES Top Rod Assembly 7' Dr 4270101873 – each 145.00

ES Top Rod Assembly 8' Dr 4270101874 – each 219.00● RA6 RL Bottom Rod Assembly 4270100522 – each 115.00

RA7 Hex Bottom Rod Assembly 4270101831 – each 60.00● RA8 PL Bottom Rod Assembly 4270100266 – each 118.00

SU Rod 8’ Door 4270100018 – each 84.00SU Ext Rod Kit Up to 9’ Dr (not shown) 4270100172 – each 75.00SU Ext Rod Kit Up to 10’ Dr (not shown) 4270100197 – each 86.00

■ Standard SU Top Rod or Standard PL, ES or RL Bottom Rod.

● Specify if door material other than aluminum. Complete rod and latch assembly includes PB24 standard rod and PB23 nut.Part numbers shown are for standard centerlines and assembled lengths.

▲ Not shown in parts diagram. For devices shipped before May 1977.



15




ModelNo. Part No. Finish List Price

34 End Case Assy LH(Includes part numbers: 4, 8, 9, 17, 29, 31, 32, 36, 38)

LH = Lock Stile assembly for LHR Device orHinge Stile assembly for RHR Device

DCX-2 4270902776 P28 156.00DCX-2 4270902778 P13 172.00DCX-2 4270902779 P35 172.00PBX-1 CASE.210 US3 444.00PBX-1 CASE.214 US4 502.00PBX-1 CASE.216 US10 444.00PBX-1 CASE.218 US10B 502.00PBX-1 CASE.223 US26D 502.00PBX-1 CASE.221 US26 502.00PBX-1 CASE.233 US15 653.00PBX-1 CASE.231 US14 653.00

36 Lever Arm LH

LH = Lock Stile Lever Arm for LHR Device orHinge Stile Lever Arm for RHR Device

DC15 4270902799 P28 47.00

DC15 4270902802 P13 54.00DC15 4270902803 P35 54.00SD15* LARM.173 US3 142.00SD15* LARM.174 US4 182.00SD15* LARM.175 US10 142.00SD15* LARM.176 US10B 182.00SD15* LARM.180 US26D 182.00SD15* LARM.179 US26 182.00SD15* LARM.178 US15 214.00SD15* LARM.177 US14 214.00

38 Housing Assembly(Includes housing, retainer spring, retainer, dog screw and mounting screws)

DC1 4270902787 P28 109.00DC1 4270902789 P13 109.00DC1 4270902790 P35 288.00SD1* HOUSING.218 US3 314.00SD1* HOUSING.225 US4 288.00SD1* HOUSING.226 US10 314.00SD1* HOUSING.229 US10B 314.00SD1* HOUSING.231 US26D 314.00SD1* HOUSING.230 US26 433.00SD1* HOUSING.238 US15 433.00SD1* HOUSING.237 US14 416.00


35 End Case Assy RH(Includes part numbers: 4, 8, 9, 17, 29, 31, 32, 37, 38)

RH = Lock Stile assembly for RHR Device or Hinge Stile assembly for LHR Device


37 Lever Arm RHRH = Lock Stile Lever Arm for RHR Device or

Hinge Stile Lever Arm for LHR DeviceDC40 4270902805 P28 47.00DC40 4270902808 P13 54.00DC40 4270902809 P35 54.00SD40* LARM.181 US3 142.00SD40* LARM.182 US4 182.00SD40* LARM.183 US10 142.00SD40* LARM.184 US10B 182.00SD40* LARM.188 US26D 182.00SD40* LARM.187 US26 182.00SD40* LARM.186 US15 214.00SD40* LARM.185 US14 214.00

39 Crossbar 41"PB39 4270900091 US28 109.00PB39 4270900094 DC13 120.00PB39 4270900095 DC35 120.00PB39 CBAR.102 US3 263.00PB39 CBAR.132 US4 285.00PB39 4270900097 US10 263.00PB39 4270900098 US10B 285.00PB39 CBAR.209 US15 318.00PB39 CBAR.208 US14 318.00

Crossbar 48"CBAR.101 US28 125.00CBAR.116 DC13 136.00CBAR.135 DC35 136.00CBAR.143 US3 289.00CBAR.148 US4 311.00CBAR.160 US10 289.00CBAR.120 US10B 311.00CBAR.207 US15 344.00CBAR.206 US14 344.00


* 1990/2090 Lever Arms & Housing Assemblies in US finishes are not compatible with 990/1090 components. Replace withappropriate end case assembly or active housing assembly.

16




Crossbar Devices

PBX-2Part No. 4270902091 US32D List Price 37.00

4270902095 DC35 37.00

RDX-2Part No. 4270902121 US32D List Price 12.00

4270902125 DC35 12.00

Panic Device Repair Kit List Price

PB20 Complete Repair Kit 4270100583 262.00Maintenance Kit Box only 4270100582 18.00

Kit Includes:

Part Number Description Replacement Pkg.

12 RING.108 Retaining Rings RRING.109 (pkg/25)6 4270100130 1/4-20 x 3/8 Set Screws SCREW.1030 (pkg/25)6 BUSH.108 Bearing Bushing BUSH.109 (pkg/10)8 4270101753 Tension Springs SPRING.103 (pkg/10)2 4270100153 Dogging Screws SCREW.1022 (pkg/25)10 4270100108 10-32 x 1/4 UFPH MS SCREW.1028 (pkg/10)6 4299100213 1/4-20 x 1" FPH MS SCREW.1027 (pkg/10)3 4270100152 Spring Pins PIN.104 (pkg/10)1 4270100116 Dogging Key KEY.101 (pkg/10)1 4270100218 1/8" Allen Wrench WRENCH.101 (pkg/10)3 4270100110 Retractor RETRACT.101 (pkg/10)4 4270903177 Pinion Cams CAM.102 (pkg/10)8 4230100017 Center Case Mounting Studs STUD.101 (pkg/10)12 4299100961 8-32 x 1/2" UFPH TC Screws SCREW.1032 (pkg/25)8 4270100151 Tension Springs SPRING.102 (pkg/10)6 4270101778 Axle Bushings BUSH.103 (pkg/25)3 4270108348 PB48 Strike US32D EACH3 4270106026 PB48 Strike Shims SHIM.112 (pkg/10)4 4270100663 Cylinder Bushings BUSH.102 (pkg/10)1 4270100013 Lift Bracket Assy EACH4 4270106997 Axle Pins PIN.115 (pkg/10)2 4270100026 3/16 x 13/16 Roll Pins PIN.109 (pkg/10)2 4270100075 3/16 x 9/16 Roll Pins PIN.110 (pkg/10)1 4270100299 Dogging Key Tag EACH12 4299100997 Retaining Rings RRING.103 (pkg/25)1 4270100582 Maintenance Kit Box EACH

1990 Auxiliary Pkg. 2090 Auxiliary Pkg.

Parts Kit For Easy ServicingOf 1990 Devices

17





37

12

28

31

30

30

31

33

32

11

34

37

33 35

39

36

29

7

86

1

9

5

1613

26

14

15

4

3

1

1

8 67

11

2

2

Left Hand Reverse Shown


18






1 PB2 Case Mounting Stud STUD.101 - 10 22.002 PB53 Retaining Ring .250 RRING.103 - 10 9.003 PB5 Pinion Cam CAM.102 - 10 106.00

PB140 Pinion Cam 4270903177 - each 15.004 PB10 Cylinder Bushing BUSH.102 - 10 19.005 PB12 1/4-20 1" FPHTC TYP23 SCREW.1027 US32D 10 30.00

PB12 1/4-20 1" FPHTC TYP23 SCREW.1015 BLACK 10 30.006 PB13 1090 Axle Pin PIN.106 SS 10 98.00

PB15 2090 Axle Pin PIN.115 US32D 10 98.00Latch Pivot Pin PIN.116 - 10 10.00

7 PB14 Dog Screw SCREW.1022 - 25 85.009 PB30 Allen Wrench WRENCH.101 - 10 12.5011 PB38 1/4-20 3/8" Hex Soc Set Screw SCREW.1030 US32D 25 24.00

PB38 1/4-20 3/8" Hex Soc Set Screw SCREW.1039 BLACK 25 24.0012 PB42 Adapter Plate Assembly 4270100304 - 2 22.0013 PB61 Latch Spring SPRING.104 - 10 11.5014 PB62 Latch Link 4270101840 - each 10.0015 PB63 4-40 3/8" FL Posi-Drive Screw SCREW.1031 - 10 10.0016 PB64 Latchbolt Retractor RETRACT.102 - 10 123.0026 PB81 Retaining Ring .240 RRING.102 - 10 9.0028 PB89 2090 Backplate Assembly LHR 4270902968 - each 51.00

PB89 2090 Backplate Assembly RHR 4270902974 - each 51.0029 PB99 Hex Dogging Key KEY.101 - 10 30.00

Crossbar Tie Rod 4270100312 - each 53.0030 RD10 Spring Pin PIN.104 - 10 17.0031 RD9 Old Style Tension Spring SPRING.102 - 10 27.00

SD9 Tension Spring SPRING.103 - 10 24.0032 SD43 Axle Bushing BUSH.103 - 25 24.0033 SD45 Spring Retainer RETAIN.102 - 25 15.00

REFERENCE NOTE:▲Not shown in parts diagram.

19





34 End Case Assy LH(Includes part numbers: 2, 6, 7, 11, 25, 31, 32, 33, 35, 37)

LH = Hinge Stile assembly for RHR Device


35 Lever Arm LH - Active

LH = Lock Stile Lever Arm for LHR Device

DC16 4270902763 P28 47.00DC16 4270902766 P13 54.00DC16 4270902767 P35 54.00SD16* LARM.209 US3 142.00SD16* LARM.210 US4 182.00SD16* LARM.211 US10 142.00SD16* LARM.212 US10B 182.00SD16* LARM.216 US26D 182.00SD16* LARM.215 US26 182.00SD16* LARM.214 US15 214.00SD16* LARM.213 US14 214.00

36 Lever Arm LH - End Case

LH = Hinge Stile Lever Arm for RHR Device



34 End Case Assy RH(Includes part numbers: 2, 6, 7, 11, 25, 31, 32, 33, 34, 36)

RH = Hinge Stile assembly for LHR Device


35 Lever Arm RH - Active

RH = Lock Stile Lever Arm for RHR Device


36 Lever Arm RH - End Case

RH = Hinge Stile Lever Arm for LHR Device



* 1990/2090 Lever Arms & Housing Assemblies in US finishes are not compatible with 990/1090 components. Replace with appropriate end case assembly or active housing assembly.

20






37 Active Housing Assembly LH(Includes part numbers: 3, 4, 14, 15, 28, 34)

LH = Lock Stile assembly for LHR Device

DCX-1 4270902740 P28 199.00DCX-1 4270902742 P13 212.00DCX-1 4270902743 P35 212.00RDX-1 CASE.236 US3 518.00RDX-1 CASE.237 US4 574.00RDX-1 CASE.238 US10 518.00RDX-1 CASE.239 US10B 574.00RDX-1 CASE.243 US26D 574.00RDX-1 CASE.242 US26 574.00RDX-1 CASE.241 US15 725.00RDX-1 CASE.240 US14 725.00

39 Crossbar 41"PB39 4270900091 US28 109.00PB39 4270900094 DC13 120.00PB39 4270900095 DC35 120.00PB39 CBAR.102 US3 263.00PB39 CBAR.132 US4 285.00PB39 4270900097 US10 263.00PB39 4270900098 US10B 285.00PB39 CBAR.209 US15 318.00PB39 CBAR.208 US14 318.00


37 Active Housing Assembly RH(Includes part numbers: 3, 4, 14, 15, 28, 34)

RH = Lock Stile assembly for RHR Device

DCX-1 4270902746 P28 199.00DCX-1 4270902748 P13 212.00DCX-1 4270902749 P35 212.00RDX-1 CASE.211 US3 518.00RDX-1 CASE.224 US4 574.00RDX-1 CASE.225 US10 518.00RDX-1 CASE.226 US10B 574.00RDX-1 CASE.229 US26D 574.00RDX-1 CASE.228 US26 574.00RDX-1 CASE.235 US15 725.00RDX-1 CASE.234 US14 725.00

Crossbar 48"CBAR.101 US28 125.00CBAR.116 DC13 136.00

CBAR.135 DC35 136.00CBAR.143 US3 289.00CBAR.148 US4 311.00CBAR.160 US10 289.00CBAR.120 US10B 311.00CBAR.207 US15 344.00CBAR.206 US14 344.00

21




1490/1590 SeriesPushbar

14

20

19

92

6

3

7

1

10

12

13

7

3

8

2

18

21

14

19

9

2

6

3 7

12

13

10

47

5

8

18

7

1490 1590

1490/1590 SeriesPushbar

Model Pkg ListNo. Description Part No. Finish Qty Price

1 PB17 10-32 1/4" UFPHMS Screw SCREW.1028 – 10 17.002 PB200 1490/1590 Pushbar Mounting Bracket 4270106786 – each 18.003 PB201 1490/1590 Pushbar End Cap 4270106787 P35 each 36.004 PB202 1590 Pushbar End Cap 4270106875 P35 each 14.005 PB203 1590 Center Case Cover P35 4270106863 P35 each 22.006 PB204 1490/1590 P/Bar Hingeside Mounting Plate 4270106770 – each 10.007 ● PB205 8-32 1" FH Torx Screw SCREW.1050 – 10 24.00

PB205 8-18 1.14" FPH TF Typ 25 SCREW.1143 – 10 17.008 PB206 12-24 1 1/2" UFPHMS Screw (1490) SCREW.1282 – 10 18.00

PB219 12-24 1" UFPHMS Screw (1590) SCREW.1066 – 10 18.009 PB207 12-24 1" PPH W/SEMS EXT TF Screw SCREW.1053 – 10 19.0010 PB208 8-32 1/4" UFPHMS Screw SCREW.1012 US32D 10 9.00

PB208 8-32 1/4" UFPHMS Screw SCREW.1055 BLACK 10 9.0012 PB210 Pushbar Bumper 4' (2 ea. Required) BUMPER.103 – each 9.0013 PB211 Short Arm Key KEY.102 – 10 28.0014 PB212 1490 RHR/1590 LHR Push Label 4270107321 BLACK each 22.00

PB213 1490 LHR/1590 RHR Push Label 4270107323 BLACK each 22.00PB214 1490 RHR/1590 LHR Push Label 4270107320 GOLD each 22.00PB215 1490 LHR/1590 RHR Push Label 4270107322 GOLD each 22.00

● For Devices shipped before September, 2004.

22




1490/1590 Series (continued)Pushbar


18 PB250 1490 Pushbar 36" 4270107027 US28 each 86.001490 Pushbar 36" 4270107028 DC13 each 92.001490 Pushbar 36" 4270107029 DC35 each 92.001490 Pushbar 36" 4270107685 US3 each 895.001490 Pushbar 36" 4270107689 US4 each 895.001490 Pushbar 36" 4270107686 US10 each 938.001490 Pushbar 36" 4270107691 US10B each 938.001490 Pushbar 36" 4270107687 US14 each 938.001490 Pushbar 36" 4270107688 US15 each 938.00



18 PB261 1590 Pushbar 48" 4270107095 US28 each 106.001590 Pushbar 48" 4270107096 DC13 each 109.001590 Pushbar 48" 4270107097 DC35 each 109.001590 Pushbar 48" EXT.255 US3 each 910.001590 Pushbar 48" EXT.259 US4 each 910.001590 Pushbar 48" EXT.256 US10 each 910.001590 Pushbar 48" EXT.261 US10B each 954.001590 Pushbar 48" EXT.257 US14 each 954.001590 Pushbar 48" EXT.258 US15 each 954.00

19 PB270 1490 Channel 36" 4270107034 US28 each 86.001490 Channel 36" 4270107035 DC13 each 92.001490 Channel 36" 4270107036 DC35 each 92.00




20 PBX-23 1490 Lockside End Cap Assembly ECAP.111 P35 each 28.0021 PBX-24 1490 Hingeside End Cap Assembly ECAP.103 P35 each 32.00

● PBX-25 1490 Mounting Package PKG.102 US28 each 16.00● PBX-25 1490 Mounting Package PKG.104 DC35 each 17.00▲ PBX-26 1590 Mounting Package PKG.105 - each 16.00

REFERENCE NOTES:For complete pushbar assemblies refer to page 35.

● PBX-25 includes part numbers 1, 7, 8, 13 and a hex dogging key▲ PBX-26 includes part numbers 6, 7, 8, 9, 13 and a hex dogging key


23




1490/1590 SeriesActivating Baseplate Assembly

7

2

1319

187

8

3

4

6

7 5

7 614

16

1711

15

13 19 12

10 714

7

9

1490

1319

187

8

114

11

15

13 19 12

10 714

7

9

15

20

21

See panic hardware price list for retractor selections.

1590

24




1490/1590 SeriesActivating Baseplate Assembly


1 PB124 1590 Latchbolt Assembly 4270107603 - each 94.002 PB216 Lift Lever Axle 4270106769 - each 10.003 PB217 Lift Lever Washer WASHER.102 - 10 15.004 PB218 Retaining Ring .500 RRING.104 - 10 11.505 PB139 Link 4270106773 - each 9.006 PB220 Link Washer WASHER.103 - 10 15.007 PB221 Retaining Ring .188 RRING.105 - 10 9.008 PB222 Dogging Bracket Assembly 4270107046 - each 53.009 PB223 Dogging Clip 971659-79 - each 9.0010 PB224 Compression Spring 4299101020 - each 8.0011 Act. Rod Spring Stop CZNC 971660-79 - each 11.5012 PB226 Clevis 4270106977 - each 73.0013 PB227 8-32 3/8" PPHMS w/Sems SCREW.1136 - 10 28.0014 PB228 Clevis Assembly Axle AXLE.1007 - 10 12.5015 PB229 10-32 3/8" UFPHMS Screw SCREW.1043 - 10 12.5016 PB230 Lift Lever 4270106745 - each 15.0017 PB231 Pivot Pin 4270106772 - each 15.0018 PB232 Hex Dogging Key 5/32" KEY.10020 - 10 36.0019 PB233 #8 Washer Hi-Collar WASHER.107 - 10 10.0020 RTR10 1590 Retractor-Sgl Dr 1 3/4" 4270106888 - each 13.00

RTR11 1590 Retractor-Sgl Dr 2 1/4" 4270107422 - each 13.00RTR12 1590 Retractor-Pair w/Mullion 1 3/4" Dr 4270107520 - each 13.00RTR13 1590 Retractor-Pair w/Mullion 2 1/4" Dr 4270107521 - each 13.00

21 PB355 1590 Latchbolt Spring SPRING.127 - 10 12.50

1490 Base Plate AssembliesPBX-50 1490 Baseplate Assembly LHR 36" 4270107061 – each 364.00PBX-51 1490 Baseplate Assembly LHR 48" 4270107048 – each 408.00PBX-52 1490 Baseplate Assembly RHR 36" 4270107047 – each 364.00PBX-53 1490 Baseplate Assembly RHR 48" 4270107060 – each 408.00PBX-58 1590 Baseplate Assembly 36" 4270107089 – each 263.00PBX-59 1590 Baseplate Assembly 48" 4270107090 – each 307.00


25




EL1490/EL1590 SeriesActivating Baseplate Assembly

6

119 8

5

43

2425

261514

23

21

20

19

18

1415

22

14

15

12

10

17

EL1490

7

58

11

9

3

4

14

13

1312

10

16

1

EL1590

26




EL1490/EL1590 SeriesActivating Baseplate Assembly


1 PB125 EL1590 Latchbolt Assembly 36" 4270107623 - each 275.00PB125 EL1590 Latchbolt Assembly 48" LATCHR.102 - each 279.00

2 PB126 S1590 Latchbolt Assembly 4270108763 - each 205.003 PB300 EL Solenoid SOLENOID.142 - each 189.004 PB301 EL Potted Circuit Breaker 110741-00 - each 209.005 PB302 EL Solenoid Plunger PLUNGER.101 - each 55.00

PB303 EL Cable Assembly (not shown) 110388-00 - each 30.006 PB307 EL1490 Pull Rod 36" 4270107193 - each 30.00

PB307 EL1490 Pull Rod 48" 4270107361 - each 36.007 PB308 EL1590 Push Rod 36" 4270107342 - each 36.00

PB308 EL1590 Push Rod 48" 4270107360 - each 45.008 PB52 1/4-20 Hex Nut NUT.103 - 10 5.009 PB310 EL1590 Link 4270107341 - each 6.0010 PB311 Subminiature Switch Assembly 36" SWITCH.1002 - each 51.00

PB311 Subminiature Switch Assembly 48" SWITCH.1004 - each 57.0011 PB77 1/4-20 29/32" Soc Shoulder Screw SCREW.1061 BLACK 10 28.00

PB78 8-32 3/8 PPH w/Sems Machine Screw SCREW.1136 - 10 28.0012 PB58 2-56 RHMS Screw SCREW.1063 - 10 6.00

PB59 8-32 1/4 PPH MS Typ 2A Screw SCREW.1065 - 10 5.0013 PB41 Nylon Washer WASHER.113 - 10 8.0014 PB221 Retaining Ring .188 RRING.105 - 10 9.0015 PB220 Link Washer WASHER.103 - 10 15.0016 PB177 EL1590 Release Lever Assembly LEVER.103 - each 60.0017 PB176 EL1490 Lift Lever Spring-LHR 4270107429 - each 8.00

PB176 EL1490 Lift Lever Spring-RHR 4270107430 - each 8.0018 PB178 EL1490 Lift Lever Sub-Assembly LHR LEVER.104 - each 28.00

PB178 EL1490 Lift Lever Sub-Assembly RHR LEVER.105 - each 28.0019 PB179 EL Lift Lever Spacer 4270107194 - each 11.0020 PB135 EL1490 Pivot Bracket 4270107192 - each 8.0021 PB136 Lift Lever Washer 4270109142 - each 10.0022 PB137 Link Pin 4270107186 - each 7.0023 PB138 EL1490 Lift Lever Bracket-LHR 4270107188 - each 8.00

PB138 EL1490 Lift Lever Bracket-RHR 4270107189 - each 8.0024 PB139 1490 Link 4270106773 - each 9.0025 PB217 Lift Lever Washer WASHER.102 - 10 15.0026 PB218 Retaining Ring .500 RRING.104 - 10 11.50

PB328 Truarc Retaining Ring T5304-18 RRING.112 - 10 10.0027 Pivot Pin YZNC STL 4270107363 - 10 24.00

S1490/S1590 Baseplate AssembliesPBX-54 S1490 Baseplate Assembly LHR 36" BASEASY.210 - each 726.00PBX-55 S1490 Baseplate Assembly LHR 48" BASEASY.211 - each 769.00PBX-56 S1490 Baseplate Assembly RHR 36" BASEASY.208 - each 726.00PBX-57 S1490 Baseplate Assembly RHR 48" BASEASY.209 - each 769.00PBX-60 S1590 Baseplate Assembly 36" BASEASY.220 - each 623.00PBX-61 S1590 Baseplate Assembly 48" BASEASY.221 - each 668.00

EL1490/EL1590 Baseplate AssembliesPBX-62 EL1490 Conversion Kit LHR 36" KIT.1011 - each 791.00PBX-63 EL1490 Conversion Kit RHR 36" KIT.1010 - each 791.00PBX-64 EL1490 Conversion Kit LHR 48" KIT.1013 - each 791.00PBX-65 EL1490 Conversion Kit RHR 48" KIT.1012 - each 791.00PBX-66 EL1590 Conversion Kit 36" KIT.1008 - each 791.00PBX-67 EL1590 Conversion Kit 48" KIT.1009 - each 791.00


27





1 PB53 Retaining Ring .250 RRING.103 - 25 9.002 PB17 10-32 1/4 UFPH Screw SCREW.1028 US32D 10 17.00

PB17 10-32 1/4 UFPH Screw SCREW.1029 BLACK 10 17.003 PB23 3/8-24 Jam Nut NUT.101 - 10 17.004 PB56 Lift Bracket Assembly 4270106796 - each 48.00

PB57 EL Lift Bracket Assembly 4270107495 - each 57.005 PB79 Rod Washer WASHER.116 - 10 12.506 PB83 EL Hex Rod Guide Assembly 4270108426 US32D each 36.00

PB83 EL Hex Rod Guide Assembly GUIDE.101 P35 each 36.007 PB84 EL Hex Bushing BUSH.107 - 10 17.00

HH Hex Rod Guide Assembly GUIDE.102 P35 each 50.008 PB100 Top Rod 35.000" 4270106776 - each 45.009 PB101 Standard Bottom Rod 31.625" 4270106775 - each 45.00

PB102 EL Bottom Rod 34.625" 4270109003 - each 52.0010 PB128 EL Top Latch 4270105926 - each 115.00

PB130 SU Top Latch 4270101806 - each 85.0011 PB129 RL Bottom Latch 4270100521 - each 73.0012 PB133 Hex Bottom Bolt 4270101830 - each 32.0013 RA9 1490 Top Rod Assembly 7' Dr RODASY.110 - each 134.00

RA10 EL1490 Top Rod Assembly 7' Dr 4270109078 - each 163.0014 RA11 1490 Bottom Rod Assembly RODASY.112 - each 81.00

RA12 EL1490 Bottom Rod Assembly 4270109077 - each 88.0015 RA13 1490 Top/Btm Rod Assembly 7' Dr 4270106782 - each 263.00

RA14 EL1490 Top/Btm Rod Assembly 7' Dr 4270107497 - each 292.00RA15 1490 Extension Rod Kit over 7' up to 10' Drs 4270107791 - each 96.00

1490 SeriesRod Assembly

8

14

2

11

3

4

3

10

13

2

1

1

5

5

9

Standard Rod Assembly EL Rod Assembly

8

14

12

2

6

3

4

3

10

13

2

1

1

5

5

9

7


28




1490/1590 SeriesCylinder Assembly

56

1

2

3

4

7

4

3

2

16

5

1490 1590

Hold Back Night Latch

CAM ASSEMBLY


1 PB103 Cylinder Collar 1.00" 4270107213 P28 each 17.00PB103 Cylinder Collar 1.00" 4270107214 P13 each 17.00PB103 Cylinder Collar 1.00" 4270107215 P35 each 17.00PB104 Cylinder Collar 7 Pin 1.25" 4270109005 P28 each 28.00PB104 Cylinder Collar 7 Pin 1.25" 4270109006 P13 each 28.00PB104 Cylinder Collar 7 Pin 1.25" 4270109007 P35 each 28.00

2 PB105 Cylinder Tube w/Pin 1 3/4" Dr 4270107286 – each 30.00PB105 Cylinder Tube w/Pin 2" Dr 4270107833 – each 49.00PB105 Cylinder Tube w/Pin 2 1/4" Dr 4270107787 – each 49.00PB106 Cylinder Tube w/Pin 7 Pin 1 3/4" Dr 4270109009 – each 49.00PB106 Cylinder Tube w/Pin 7 Pin 2" Dr 4270109190 – each 49.00

HH Cylinder Tube w/Pin 1 3/4" Dr 4270109630 – each 36.00HH Cylinder Tube w/Pin 7 Pin 1 3/4" Dr CTUBE.232 – each 55.00

3 PB115 1490 NL Cam Assembly 4270107268 – each 24.00PB116 1490 HB Cam Assembly 4270107270 – each 24.00PB117 1590 NL Cam Assembly 4270107283 – each 24.00PB118 1590 HB Cam Assembly 4270107285 – each 24.00

4 PB120 Cylinder Adaptor Washer WASHER.108 – 10 11.505 PB121 Cylinder Lock Washer WASHER.109 CZNC 10 15.00

PB121 Cylinder Lock Washer WASHER.110 BLACK 10 15.006 PB122 Cylinder Collar Spring SPRING.105 – 10 8.007 PB206 12-24 1 1/2" UFPHMS Screw SCREW.1105 CZNC 10 18.00

PB206 12-24 1 1/2" UFPHMS Screw SCREW.1099 BLACK 10 17.00


29




15

14

13

6

17

23

12

9

10

5

4

87

2220

18

1

19

11

2930

24

25

3

2

21

3128

33

32

24

26

36

11

34

27

1690 SeriesExploded View and Parts List

1690 Series


1 PB1710-32 1/4" UFPHMS SCREW.1028 US32D 10 17.00PB1710-32 1/4" UFPHMS SCREW.1029 BLACK 10 17.00

2 PB3Bearing Bushing BUSH.109 - 10 19.003 PB4Retaining Ring .250 RRING.109 - 25 15.004 PB114Lock Stile Mounting Screw SCREW.1069 - 10 10.005 PB127Lift Bracket BRKT.138 - each 17.006 PB232Hex Dogging Key 5/32" KEY.10020 - 10 36.00

PBX-27Auxiliary Package (part 1-6) PKG.150 US28 each 19.00PBX-27Auxiliary Package (part 1-6) PKG.151 DC13/DC35 each 19.00

7 PB10Cylinder Bushing BUSH.102 - 10 19.008 PB5Pinion Cam CAM.102 - 10 106.00

PB140Pinion Cam 4270903177 - each 15.009 PB35Rod Retractor RETRACT.101 - 10 43.0010 PB141Retainer Screw SCREW.1074 - 10 15.0011 PB312Pinion Support Bracket BRKT.478 - each 7.0012 PB313Center Case Cover Kit COVER.113 - each 31.0013 PB314Channel/Hinge End Cap Kit ECAP.130 - each 20.00


30




1690 Series (continued)


14 PB315 1/4-20 1/2" PPHMS Screw SCREW.1070 – 10 9.0015 ★ PB316 #8 1.1/2" FPH TC Typ AB Screw SCREW.1072 – 10 9.00

PB316 8-18 1.14" FPH TF Typ 25 SCREW.1143 – 10 17.0016 PB317 1/4-20 3/8" Hex Soc Set Screw SCREW.1067 BLACK 3 10.00

PB317 1/4-20 3/8" Hex Soc Set Screw SCREW.1068 US28 3 10.0017 PBX-16 Dogging Kit KIT.1197 – each 25.0018 PB322 Push Bar Pin PIN.128 – 10 9.0019 PB323 Dogging Spring 971493-76 – each 5.0020 PB338 Actuator Arm Bracket Assy BRKTASY.107 – each 12.5021 PB318 Lock Stile Push Bar End Cap ECAP.129 P35 each 12.5022 ★ PB345 8-3/4" FPHSMS SCREW.1077 BLACK 10 17.00

PB345 8-18 .3/4" FPH TF Typ 25 SCREW.1141 – 10 12.5023 ▲ PB324 8-5/8" FPHSMS SCREW.1025 BLACK 10 15.0024 PB23 Rod Jam Nut NUT.101 – 10 17.0025 ■ PB24 SU/PL/ES/RL Rod 4270100017 – each 27.00

PB24 SU/PL/ES/RL Rod-1/4" Insulclad 7' 4270102427 – each 27.00PB24 SU/PL/ES/RL Rod-1/4" Insulclad 8' 4270102426 – each 84.00

SU Rod 8' Door 4270100018 – each 84.00SU Ext Rod Kit Up to 9' Dr (not shown) 4270100172 – each 75.00SU Ext Rod Kit Up to 10' Dr (not shown) 4270100197 – each 86.00

26 PB25 Hex Bottom Rod 4270101825 – each 27.0027 PB54 Latch Mtg Bracket Kit-HMD BRKTASY.101 – each 37.0028 ● PB129 RL Bottom Latch 4270100521 – each 73.0029 ● PB130 SU Top Latch 4270101806 – each 85.0030 ● PB131 ES Top Latch 4270100346 – each 100.0031 ● PB132 PL Bottom Latch 4270101482 – each 73.0032 PB352 Hex Bottom Bolt Beveled BOLT.1004 – each 36.0033 PB134 Hex Rod Guide Assembly 4270107176 US32D each 31.00

PB134 Hex Rod Guide Assembly 4270107178 P35 each 31.00Hex Rod Guide Screws SCREW.1076 US28 10 6.50Hex Rod Guide Screws SCREW.1081 DC13/DC35 10 6.50ES Latch Pin PIN.110 – 10 16.00SU/ES/PL/HH Latch Spirol Pin PIN.109 – 10 13.00

34 SR33 10-32 3/8" FPHMS SCREW.1037 – 25 15.00● RA1 SU Top Rod Assembly 7' Dr 4270106632 – each 115.00● RA2 SU Top Rod Assembly 8' Dr 4270106633 – each 174.00● RA3 SU Top Rod Assembly 9' Dr 4270101818 – each 187.00● RA4 SU Top Rod Assembly 10' Dr 4270101819 – each 204.00● RA5 ES Top Rod Assembly 7' Dr 4270101873 – each 145.00

ES Top Rod Assembly 8' Dr 4270101874 – each 219.00● RA6 RL Bottom Rod Assembly 4270100522 – each 115.00

RA17 Hex Bottom Rod Assembly RODASY.1075 – each 82.00● RA8 PL Bottom Rod Assembly 4270100266 – each 118.00

36 PB321 Pushbar Anchor Bracket BRKT.128 – each 7.00

REFERENCE NOTES:■ Standard SU Top Rod or Standard PL, ES or RL Bottom Rod.● Specify if door material other than aluminum. Complete rod and latch assembly includes PB24 standard rod and PB23 nut.

Part numbers shown are for standard centerlines and assembled lengths.★ For devices shipped before September, 2004.▲ For covers shipped before July 2006.

31




1690 Series (continued)

Model Pkg ListNo. Description Part No. Finish Qty PricePB123 NL Cylinder Assy & Auxiliary Parts (parts 1-10) KIT.1156 US28 each 45.00PB123 NL Cylinder Assy & Auxiliary Parts (parts 1-10) KIT.1157 DC13/DC35 each 45.00169CA 1690NL Cylinder Assembly (parts 7-10) CYLASY.1083 – each 28.00PB18 10-32 3/8" UFPH TF SCREW.1121 US28 8 8.00PB18 10-32 3/8" UFPH TF SCREW.1114 DC13/DC35 8 8.00PB19 Center Case Bracket BRKT.156 – each 12.00PB328 Truarc Retaining Ring T5304-18 RRING.112 – 10 10.00PB353 RX Switch Wire Assembly (not shown) SWITCH.1006 – each 168.00PB301 EL Potted Circuit Breaker (not shown) 110741-00 – each 209.00PB300 EL Solenoid 24 VDC (not shown) 971687-00 – each 189.00PB302 EL Plunger (not shown) PLUNGER.101 – each 55.00PB303 EL Cable Assembly (not shown) 110388-00 – each 30.00

1690/1790 Pushbars and Channels Standard EL

PBX-38 1690/1790 Pushbar 30" EXT.827 EXT.830 US28 each 81.001690/1790 Pushbar 30" EXT.828 EXT.825 DC13 each 94.001690/1790 Pushbar 30" EXT.829 EXT.826 DC35 each 94.001690/1790 Pushbar 30" EXT.2351 EXT.2323 US3 each 219.001690/1790 Pushbar 30" EXT.2352 EXT.2333 US10 each 198.001690/1790 Pushbar 30" EXT.2353 EXT.2338 US26 each 219.001690/1790 Pushbar 30" EXT.2354 EXT.2340 US26D each 198.00

PBX-39 1690/1790 Pushbar 36" EXT.608 EXT.398 US28 each 81.001690/1790 Pushbar 36" EXT.609 EXT.399 DC13 each 94.001690/1790 Pushbar 36" EXT.631 EXT.400 DC35 each 94.00

1690/1790 Pushbar 36" EXT.2355 EXT.2324 US3 each 219.001690/1790 Pushbar 36" EXT.2356 EXT.2334 US10 each 198.001690/1790 Pushbar 36" EXT.2357 EXT.2339 US26 each 219.001690/1790 Pushbar 36" EXT.2358 EXT.2289 US26D each 198.00



REFERENCE NOTES:

✹ RX Switch Kit valid for Field Install RX Option on Devices shipped after June, 2002.

✹


32




1

105

4

3

11

9

23 16

8

2120

19 18

17

15

1413

6

12

2

22


33




1790 SeriesModel Pkg List No. Description Part No. Finish Qty Price

1 PB314 Channel/Hingeside End Cap Kit ECAP.130 - each 20.002 PB329 Center Case Cover Kit COVER.120 - each 31.003 PB232 Hex Dogging Key 5/32" KEY.10020 - 10 36.004 PB315 1/4-20 1/2" PPHMS Screw SCREW.1070 - 10 9.005 PB316 #8 1.1/2" FPH TC Typ AB Screw SCREW.1072 - 10 9.00

PB316 8-18 1.1/4" FPH TF Typ 25 SCREW.1143 - 10 17.006 PB330 1/4-20 3/4" PPHMS Screw SCREW.1075 - 10 10.00

PB18 10-32 3/8" UFPH TF SCREW.1121 US28 8 8.007 PBX-18 Auxiliary Package PKG.133 - each 8.008 PB325 Latch Assembly LBOLT.105 - each 45.00

PB353 RX Switch Wire Assembly (not shown) SWITCH.1006 - each 168.00PB301 EL Potted Circuit Breaker (not shown) 110741-00 - each 209.00PB300 EL Solenoid 24VDC (not shown) 971687-00 - each 189.00PB302 EL Plunger (not shown) PLUNGER.101 - each 55.00PB303 EL Cable Assembly (not shown) 110388-00 - each 30.00

9 PB322 Pushbar Pin PIN.128 - 10 9.0010 PB323 Dogging Spring 971493-76 - each 5.0011 PBX-16 Dogging Kit KIT.1197 US28 each 25.0012 PB324 8 x 5/8 FPHTC Typ 25 SCREW.1025 - 10 15.0013 PB318 Lock Stile End Cap ECAP.129 DC35 each 13.0014 PB345 8-3/4" FPHSMS SCREW.1077 BLACK 10 17.00

PB345 8-18 .3/4" FPH TF Typ 25 SCREW.1141 - 10 13.0015 PB320 Latch Pin 969467-89 - each 8.0016 PB328 Truarc Retaining Ring T5304-18 RRING.112 - 10 10.0017 PB331 Short Arm Allen Wrench 4270109548 - each 5.00

PB327 10-32 3/8 UFPH MS SCREW.1150 - 10 16.0019 PB326 1790 Channel Spacer SPACER.107 - each 13.0020 PB319 Drive Bushing CAMASY.101 - each 37.0021 PB344 Slider SLIDER.101 - each 6.0022 179CA 1790 NL/HB Cylinder Assembly CYLASY.1151 - each 28.0023 PB321 Pushbar Anchor Bracket BRKT.128 - each 7.00

1790 Pushbars and Channels on page 31

✹

■

■

REFERENCE NOTES:✹ RX Switch Kit valid for Field Install RX option on devices shipped after June, 2002■ For Devices shipped before September, 2004.▲ For Devices shipped before July, 2006.

▲


34





8

1

7

9

10

7

12

26 12

3

168

8

17

9

11

15

20

11

24

25

11

19

18

2

3

4

56

7

27

4

13 6

21

1

10

2322

15 15

35




2390 SeriesModel Pkg List No. Description Part No. Finish Qty Price

1 PB323 Dogging Spring 971493-76 - each 5.002 PB334 Lift Lever Axle AXLE.1006 - each 5.003 PB335 Pushbar Anchor Bracket BRKT.137 - each 12.504 PB336 Lift Bracket BRKT.143 - each 11.505 PB338 Actuator Arm Bracket Assembly BRKTASY.107 - each 12.506 PB3 Bearing Bushing BUSH.109 - 10 19.007 PB341 Fixed Cover COVER.127 - each 26.008 PB342 Moving Pushbar End Cap ECAP.143 - each 10.009 PB232 Hex Dogging Key 5/32" KEY.10020 - 10 36.0010 PBX-16 Dogging Kit KIT.1197 each 25.0011 PB23 Rod Jam Nut NUT.101 - 10 17.0012 PB322 Pushbar Pin PIN.128 - 10 9.00

PBX-28 Mounting Package (parts 4,6,9,13,15) PKG.134 US32D each 19.00PBX-28 Mounting Package (parts 4,6,9,13,15) PKG.135 DC35 each 19.00

13 PB4 Retaining Ring .250 RRING.109 - 25 15.0015 PB17 10-32 1/4" UFPHMS SCREW.1028 US32D 10 17.00

PB17 10-32 1/4" UFPHMS SCREW.1029 BLACK 10 17.0016 PB345 #8 3/4" FPH TF AB Screw SCREW.1077 - 10 17.00

PB345 8-18 .3/4" FPH TF Typ 25 SCREW.1141 - 10 13.0017 PB350 12-14 1/2" UFPH MS Typ 25 Screw SCREW.1088 - 10 13.00

10-32 3/8" UFPH TF SCREW.1121 US28 8 8.0010-32 3/8" UFPH TF SCREW.1114 DC13/DC35 8 8.00Hex Rod Guide Screws SCREW.1076 US28 10 7.00Hex Rod Guide Screws SCREW.1081 DC13/DC35 10 7.00

RA16 Extension Rod Kit (not shown) EXTROD.1001 - each 118.0018 PB134 Hex Rod Guide Assembly 4270107176 US32D each 31.00

PB134 Hex Rod Guide Assembly 4270107178 P35 each 31.0019 PB352 Hex Bottom Bolt-Beveled BOLT.1004 - each 36.0020 PB130 SU Top Latch 4270101806 - each 85.0021 PB131 ES Top Latch 4270100346 - each 100.0022 PB129 RL Bottom Latch 4270100521 - each 73.0023 PB132 PL Bottom Latch 4270101482 - each 73.00

ES Latch Pin PIN.110 - 10 17.00SU/ES/PL/HH Latch Spirol Pin PIN.109 - 10 14.00

PB353 RX Switch Wire Assembly (not shown) SWITCH.1006 - each 168.00PB303 EL Cable Assembly (not shown) 110388-00 - each 30.00PB301 EL Potted Circuit Breaker (not shown) 110741-00 - each 209.00PB300 EL Solenoid 24VDC (not shown) 971687-00 - each 189.00PB302 EL Plunger (not shown) PLUNGER.101 - each 55.00

24 PB357 Top Rod 34.00", CL=42.5,DH=83 3/16 ROD.1043 - each 27.00PB358 Top Rod 35.500", CL=41.25,DH=83 3/16 4270103324 - each 27.00PB359 Top Rod 39.000", CL=37.875,DH=83 3/16 ROD.1082 - each 27.00PB360 Top Rod 36.500", CL=40,DH=83 3/16 ROD.1036 - each 27.00

25 PB361 Bottom Rod 40.000", CL=42 1/2 ROD.1080 - each 27.00PB362 Bottom Rod 38.500", CL=41 1/4 ROD.1044 - each 27.00PB24 Bottom Rod 35.125", CL=37 7/8 4270100017 - each 27.00PB363 Bottom Rod 37.500", CL=40 ROD.1011 - each 27.00PB365 2390 LBR KIT KIT.1128 - each 12.00

REFERENCE NOTES:✹ RX Switch Kit valid for Field Install RX option on devices shipped after June, 2002★ For Devices shipped before September, 2004.

✹

★

36




2390 SeriesModel List No. Description Part No. Finish Price

26 PBX-30 Pushbar 21" EXT.3000 US28 118.00Pushbar 21" EXT.3001 DC13 128.00Pushbar 21" EXT.3002 DC35 128.00Pushbar 21" EXT.3003 Champagne 128.00

PBX-31 Pushbar 24" EXT.3004 US28 138.00Pushbar 24" EXT.3005 DC13 152.00Pushbar 24" EXT.3006 DC35 152.00Pushbar 24" EXT.3007 Champagne 152.00

27 PBX-32 Coverplate 21" EXT.3008 US28 45.00Coverplate 21" EXT.3009 DC13 53.00Coverplate 21" EXT.3010 DC35 53.00Coverplate 21" EXT.3011 Champagne 53.00

PBX-33 Coverplate 24" EXT.3012 US28 51.00Coverplate 24" EXT.3013 DC13 60.00Coverplate 24" EXT.3014 DC35 60.00Coverplate 24" EXT.3015 Champagne 60.00

PBX-34 EL Coverplate 21" EXT.3050 US28 45.00EL Coverplate 21" EXT.3051 DC13 53.00EL Coverplate 21" EXT.3052 DC35 53.00EL Coverplate 21" EXT.3053 Champagne 53.00

PBX-35 EL Coverplate 24" EXT.3054 US28 51.00EL Coverplate 24" EXT.3055 DC13 60.00EL Coverplate 24" EXT.3056 DC35 60.00EL Coverplate 24" EXT.3057 Champagne 60.00

■ PBX-9 Channel Assembly 42" Door CHASY.147 US28 76.00■ Channel Assembly 42" Door CHASY.160 DC13 94.00■ Channel Assembly 42" Door CHASY.107 DC35 94.00■ Channel Assembly 42" Door CHASY.158 Champagne 124.00■ PBX-10 Channel Assembly 48" Door CHASY.108 US28 87.00■ Channel Assembly 48" Door CHASY.109 DC13 126.00■ Channel Assembly 48" Door CHASY.125 DC35 126.00■ Channel Assembly 48" Door CHASY.207 Champagne 126.00■ PBX-36 Filler Plate 16.50, 42" Door EXT.2927 US28 24.00■ Filler Plate 16.50, 42" Door EXT.2949 DC13 26.00■ Filler Plate 16.50, 42" Door EXT.2950 DC35 26.00■ Filler Plate 16.50, 42" Door EXT.2951 Champagne 26.00■ PBX-15 Filler Plate 19.50, 48" Door EXT.440 US28 25.00■ Filler Plate 19.50, 48" Door EXT.445 DC13 27.00■ Filler Plate 19.50, 48" Door EXT.450 DC35 27.00■ Filler Plate 19.50, 48" Door EXT.2244 Champagne 27.00● RA-18 Top Rod Assy RHR AL=40.176 CL=42.5 DH=83 3/16" RODASY.10001 – 115.00● RA-19 Top Rod Assy RHR AL=41.426 CL=41.25 DH=83 3/16" RODASY.10002 – 115.00● RA-20 Top Rod Assy RHR AL=44.801 CL=37.875 DH=83 3/16" RODASY.10003 – 135.00● RA-21 Top Rod Assy RHR AL=42.676 CL=40 DH=83 3/16" RODASY.10004 – 115.00● RA-22 Top Rod Assy RHR AL=41.489 CL=41.25 DH=83 1/4" RODASY.10005 – 115.00● RA-23 Top Rod Assy LHR AL=40.176 CL=42.5 DH=83 3/16" RODASY.10006 – 115.00● RA-24 Top Rod Assy LHR AL=41.426 CL=41.25 DH=83 3/16" RODASY.10007 – 115.00● RA-25 Top Rod Assy LHR AL=44.801 CL=37.875 DH=83 3/16" RODASY.10008 – 135.00● RA-26 Top Rod Assy LHR AL=42.676 CL=40 DH=83 3/16" RODASY.10009 – 115.00● RA-27 Top Rod Assy LHR AL=41.489 CL=41.25 DH=83 1/4" RODASY.10010 – 115.00● RA-28 Bottom Rod Assy AL=41.877 CL=42.5 RODASY.10011 – 60.00● RA-29 Bottom Rod Assy AL=40.627 CL=41.25 RODASY.10012 – 60.00● RA-30 Bottom Rod Assy AL=37.252 CL=37.875 RODASY.10013 – 60.00● RA-31 Bottom Rod Assy AL=39.377 CL=40 RODASY.10014 – 60.00

REFERENCE NOTES:■ Channel assembly and Filler Plate sizes supplied for field sizing.● Complete rod and latch assembly includes PB24 standard rod and PB23 nut.


37




2390 Series Cylinder Assembly

2390


1 PB343 2390 Cylinder Housing HOUSING.123 P28 each 66.00PB343 2390 Cylinder Housing HOUSING.124 P13 each 66.00PB343 2390 Cylinder Housing HOUSING.125 P35 each 66.00

2 PB332 Mortise Locking Collar 971974-00 - each 10.003 PB339 2390 NL/HB Bracket Assembly BRKTASY.118 - each 32.004 PB333 Mounting Stud 971585-89 - each 8.005 PB351 #10 Countersunk Washer WASHER.120 DC35 10 10.005 PB351 #10 Countersunk Washer WASHER.121 US32D 10 10.006 PB347 10-24 x 1" OPHMS SCREW.1083 US32D 10 12.007 PB346 1/4-20 x 3/8 SHCS SCREW.1082 - 10 12.008 PB337 2390 Rod Lift Bracket BRKT.152 - each 17.009 PB348 1/4-28 x 3/4 SHCS SCREW.1084 - 10 13.0010 PB340 Lift Bracket Kit - 2" Door BRKTASY.155 - each 35.0011 PB349 8-18 x 5/16 UFPHSMS AB Screw SCREW.1085 - each 12.00

Strike/Mullion/TrimStrike


PB49 PB48 Strike Shim SHIM.112 - 10 19.00PB33 Screw 8-32 x 1/2" UFPHMS SCREW.1038 BLACK 25 11.50PB33 Screw 8-32 x 1/2" UFPHMS SCREW.1032 US32D 25 11.50PB50 TD35 Strike Shim SHIM.150 BLACK each 20.00PB51 TD35 Screw 10-32 x 1" FPHMS SCREW.1016 BLACK 25 17.00PB91 TD35 Wear Strip 4270109590 - each 9.00PB92 TD35 Drive Rivet RIVET.101 - 25 25.00

MullionMB10 RM170 Mullion Bracket Pkg 4270108954 – each 76.00MB11 RM150 Mullion Bracket Pkg 4270107489 – each 73.00

TrimPB97 9970 Mounting Stud STUD.102 – 10 23.00

8

1

7

9

10

7

12

26 12

3

168

8

17

9

11

15

20

11

24

25

11

19

18

2

3

4

56

7

27

4

13 6

21

1

10

38






169CA . . . . .31179CA . . . . .33DC1 . . . . . .15DC15 . . . . .15, 19DC16 . . . . .19DC40 . . . . .15, 19DC41 . . . . .19DCX-1 . . . . .20DCX-2 . . . . .15, 19MB10 . . . . .37MB11 . . . . .387PB2 . . . . . . .13, 18PB3 . . . . . . .13, 29, 35PB4 . . . . . . .13, 29, 35PB5 . . . . . . .13, 18, 29PB10 . . . . . .13, 18, 29PB12 . . . . . .13, 18PB13 . . . . . .13, 18PB14 . . . . . .13, 18PB15 . . . . . .13, 18PB17 . . . . . .13, 21,

27, 29, 35PB18 . . . . . .31, 33PB19 . . . . . .31PB20 . . . . . .16PB23 . . . . . .14, 27,

30, 35PB24 . . . . . .14, 30, 35PB25 . . . . . .14, 30PB30 . . . . . .14, 18PB33 . . . . . . 37PB35 . . . . . .14, 29PB38 . . . . . .14, 18PB39 . . . . . .15, 20PB41 . . . . . .26PB42 . . . . . .18PB49 . . . . . .38PB50 . . . . . .38PB51 . . . . . .38PB52 . . . . . .26PB53 . . . . . .18, 27PB54 . . . . . .14, 30PB56 . . . . . .27PB57 . . . . . .27PB58 . . . . . .26PB59 . . . . . .26PB61 . . . . . .18PB62 . . . . . .18PB63 . . . . . .18PB64 . . . . . .18PB77 . . . . . .26PB78 . . . . . .26PB79 . . . . . .27PB81 . . . . . .18PB83 . . . . . .27PB84 . . . . . .27

PB88 . . . . . .14PB89 . . . . . .18PB91 . . . . . .37PB92 . . . . . .37PB97 . . . . . .37PB99 . . . . . .14, 18PB101 . . . . .27PB102 . . . . .27PB103 . . . . .28PB104 . . . . .28PB105 . . . . .28PB106 . . . . .28PB107 . . . . .28PB108 . . . . .28PB114 . . . . .29PB115 . . . . .28PB116 . . . . .28PB117 . . . . .28PB118 . . . . .28PB120 . . . . .28PB121 . . . . .28PB122 . . . . .28PB123 . . . . .31PB124 . . . . .24PB125 . . . . .26PB126 . . . . .26PB127 . . . . .29PB128 . . . . .27PB129 . . . . .14, 27,

30, 35PB130 . . . . .14, 27,

30, 35PB131 . . . . .14, 30, 35PB132 . . . . .14, 30, 35PB133 . . . . .14, 27PB134 . . . . .14, 30, 35PB135 . . . . .26PB136 . . . . .26PB137 . . . . .26PB138 . . . . .26PB139 . . . . .24, 26PB140 . . . . .13, 18, 29PB141 . . . . .29PB176 . . . . .26PB177 . . . . .26PB178 . . . . .26PB179 . . . . .26PB200 . . . . .21PB201 . . . . .21PB202 . . . . .21PB203 . . . . .21PB204 . . . . .21PB205 . . . . .21PB206 . . . . .21, 28PB207 . . . . .21PB208 . . . . .21

PB210 . . . . .21PB211 . . . . .21PB212 . . . . .21PB213 . . . . .21PB214 . . . . .21PB215 . . . . .21PB216 . . . . .24PB217 . . . . .24, 26PB218 . . . . .24, 26PB219 . . . . .21PB220 . . . . .24, 26PB221 . . . . .24, 26PB222 . . . . .24PB223 . . . . .24PB224 . . . . .24PB226 . . . . .24PB227 . . . . .24PB228 . . . . .24PB229 . . . . .24PB230 . . . . .24PB231 . . . . .24PB232 . . . . .24, 29,

33, 35PB233 . . . . .24PB250 . . . . .22PB251 . . . . .22PB260 . . . . .22PB261 . . . . .22PB270 . . . . .22PB271 . . . . .22PB280 . . . . .22PB281 . . . . .22PB300 . . . . .26, 31,

33, 35PB301 . . . . .26, 31,

33, 35PB302 . . . . .26, 31,

33, 35PB303 . . . . .26, 31,

33, 35PB307 . . . . .26PB308 . . . . .26PB310 . . . . .26PB311 . . . . .26PB312 . . . . .29PB313 . . . . .29PB314 . . . . .29, 33PB315 . . . . .30, 33PB316 . . . . .30, 33PB317 . . . . .30PB318 . . . . .30, 33PB319 . . . . .33PB320 . . . . .33PB321 . . . . .30, 33PB322 . . . . .30, 33, 35PB323 . . . . .30, 33, 35PB324 . . . . .30, 33

PB325 . . . . .33PB326 . . . . .33PB327 . . . . .33PB328 . . . . .26, 31, 33PB329 . . . . .33PB330 . . . . .33PB331 . . . . .33PB332 . . . . .37PB333 . . . . .37PB334 . . . . .35PB335 . . . . .35PB336 . . . . .35PB337 . . . . .37PB338 . . . . .30, 35PB339 . . . . .37PB340 . . . . .37PB341 . . . . .35PB342 . . . . .35PB343 . . . . .37PB344 . . . . .34PB345 . . . . .30, 34, 35PB346 . . . . .37PB347 . . . . .37PB348 . . . . .37PB349 . . . . .37PB350 . . . . .35PB351 . . . . .37PB352 . . . . .30, 35PB353 . . . . .31, 33, 35PB355 . . . . .24PB357 . . . . .35PB358 . . . . .35PB359 . . . . .35PB360 . . . . .35PB361 . . . . .35PB362 . . . . .35PB363 . . . . .35PB365 . . . . .35PBX-1 . . . . .15, 19PBX-9 . . . . .36PBX-10 . . . .36PBX-15 . . . .36PBX-16 . . . .30, 33, 35PBX-18 . . . .33PBX-23 . . . .22PBX-24 . . . .22PBX-25 . . . .22PBX-26 . . . .22PBX-27 . . . .29PBX-28 . . . .35PBX-30 . . . .36PBX-31 . . . .36PBX-32 . . . .36PBX-33 . . . .36PBX-34 . . . .36PBX-35 . . . .36

PBX-36 . . . .36PBX-38 . . . .31PBX-39 . . . .31PBX-40 . . . .31PBX-41 . . . .31PBX-50 . . . .24PBX-51 . . . .24PBX-52 . . . .24PBX-53 . . . .24PBX-54 . . . .26PBX-55 . . . .26PBX-56 . . . .26PBX-57 . . . .26PBX-58 . . . .24PBX-59 . . . .24PBX-60 . . . .26PBX-61 . . . .26PBX-62 . . . .26PBX-63 . . . .26PBX-64 . . . .26PBX-65 . . . .26PBX-66 . . . .26PBX-67 . . . .26RA1 . . . . . . .14, 30RA2 . . . . . . .14, 30RA3 . . . . . . .14, 30RA4 . . . . . . .14, 30RA5 . . . . . . .14, 30RA6 . . . . . . .14, 30RA7 . . . . . . .14RA8 . . . . . . .14, 30RA9 . . . . . . .27RA10 . . . . . .27RA11 . . . . . .27RA12 . . . . . .27RA13 . . . . . .27RA14 . . . . . .27RA15 . . . . . .27RA16 . . . . . .35RA17 . . . . . .30RA18 . . . . . .36RA19 . . . . . .36RA20 . . . . . .36RA21 . . . . . .36RA22 . . . . . .36RA23 . . . . . .36RA24 . . . . . .36RA25 . . . . . .36RA26 . . . . . .36RA27 . . . . . .36RA28 . . . . . .36RA29 . . . . . .36RA30 . . . . . .36RA31 . . . . . .36RD9 . . . . . . .14, 18RD10 . . . . . .14, 18

RDX-1 . . . . .20RTR10 . . . . .24RTR11 . . . . .24RTR12 . . . . .24RTR13 . . . . .24SD1 . . . . . . .15SD15 . . . . . .15, 19SD16 . . . . . .19SD40 . . . . . .15, 19SD41 . . . . . .19SD43 . . . . . .14, 18SD45 . . . . . .14SD9 . . . . . . .14, 18SR33 . . . . . .14, 30

INDEX by Model NumberModel No. Page Model No. Page Model No. Page Model No. Page Model No. Page Model No. Page


110388-00 . . . . . .26,31,34,36

110741-00 . . . . . .26,31,34,36

4230100017 . . . .164270100013 . . . .14,164270100017 . . . .14,30,

364270100018 . . . .14,304270100026 . . . .164270100075 . . . .164270100108 . . . .164270100110 . . . .164270100116 . . . .164270100130 . . . .164270100151 . . . .164270100152 . . . .164270100153 . . . .164270100172 . . . .14,304270100197 . . . .14,304270100218 . . . .164270100266 . . . .14,304270100299 . . . .164270100304 . . . .184270100312 . . . .14,184270100346 . . . .14,30,

364270100521 . . . .14,27,

30,364270100522 . . . .14,304270100582 . . . .164270100663 . . . .164270101482 . . . .14,30,

364270101753 . . . .164270101778 . . . .164270101806 . . . .14,27,

30,364270101818 . . . .14,304270101819 . . . .14,304270101825 . . . .14,304270101830 . . . .14,274270101831 . . . .144270101840 . . . .184270101873 . . . .14,304270101874 . . . .14,304270102426 . . . .14,304270102427 . . . .14,304270103324 . . . .364270105926 . . . .274270106026 . . . .164270106632 . . . .14,304270106633 . . . .14,304270106745 . . . .244270106769 . . . .244270106770 . . . .214270106772 . . . .24

4270106773 . . . .24,264270106775 . . . .274270106776 . . . .274270106782 . . . .274270106786 . . . .214270106787 . . . .214270106796 . . . .274270106863 . . . .214270106875 . . . .214270106888 . . . .244270106977 . . . .244270106997 . . . .164270107027 . . . .224270107028 . . . .224270107029 . . . .224270107031 . . . .224270107032 . . . .224270107033 . . . .224270107034 . . . .224270107035 . . . .224270107036 . . . .224270107038 . . . .224270107039 . . . .224270107040 . . . .224270107046 . . . .244270107047 . . . .244270107048 . . . .244270107060 . . . .244270107061 . . . .244270107089 . . . .244270107090 . . . .244270107091 . . . .224270107092 . . . .224270107093 . . . .224270107095 . . . .224270107096 . . . .224270107097 . . . .224270107176 . . . .14,30,

364270107178 . . . .14,30,

364270107186 . . . .264270107188 . . . .264270107189 . . . .264270107192 . . . .264270107193 . . . .264270107194 . . . .264270107213 . . . .284270107214 . . . .284270107215 . . . .284270107268 . . . .284270107270 . . . .284270107283 . . . .284270107285 . . . .284270107286 . . . .284270107320 . . . .21

4270107321 . . . .214270107322 . . . .214270107323 . . . .214270107341 . . . .264270107342 . . . .264270107360 . . . .264270107361 . . . .264270107363 . . . .264270107422 . . . .244270107429 . . . .264270107430 . . . .264270107489 . . . .384270107495 . . . .274270107497 . . . .274270107520 . . . .244270107521 . . . .244270107587 . . . .224270107588 . . . .224270107589 . . . .224270107591 . . . .224270107592 . . . .224270107593 . . . .224270107603 . . . .244270107623 . . . .264270107685 . . . .224270107686 . . . .224270107687 . . . .224270107688 . . . .224270107689 . . . .224270107691 . . . .224270107703 . . . .224270107704 . . . .224270107705 . . . .224270107706 . . . .224270107707 . . . .224270107709 . . . .224270107712 . . . .224270107713 . . . .224270107714 . . . .224270107715 . . . .224270107716 . . . .224270107718 . . . .224270107787 . . . .284270107791 . . . .274270107833 . . . .284270108348 . . . .164270108426 . . . .274270108763 . . . .264270108954 . . . .384270109003 . . . .274270109005 . . . .284270109006 . . . .284270109007 . . . .284270109009 . . . .284270109077 . . . .274270109078 . . . .27

4270109142 . . . .264270109190 . . . .284270109548 . . . .344270109590 . . . .384270109630 . . . .284270900091 . . . .15,204270900094 . . . .15,204270900095 . . . .15,204270900097 . . . .15,204270900098 . . . .15,204270902091 . . . .164270902095 . . . .164270902121 . . . .164270902125 . . . .164270902740 . . . .204270902742 . . . .204270902743 . . . .204270902746 . . . .204270902748 . . . .204270902749 . . . .204270902763 . . . .194270902766 . . . .194270902767 . . . .194270902769 . . . .194270902772 . . . .194270902773 . . . .194270902776 . . . .15,194270902778 . . . .15,194270902779 . . . .15,194270902782 . . . .15,194270902784 . . . .15,194270902785 . . . .15,194270902787 . . . .154270902789 . . . .154270902790 . . . .154270902799 . . . .15,194270902802 . . . .15,194270902803 . . . .15,194270902805 . . . .15,194270902808 . . . .15,194270902809 . . . .15,194270902968 . . . .184270902974 . . . .184270903177 . . . .13,16,

18,294299100213 . . . .164299100961 . . . .164299100997 . . . .164299101020 . . . .24969467-89 . . . . . .34971493-76 . . . . . .30,34,

36971585-89 . . . . . .38971659-79 . . . . . .24971660-79 . . . . . .24

971687-00 . . . . . .31,34,36

971974-00 . . . . . .38AXLE.1006 . . . . .36AXLE.1007 . . . . .24BASEASY.208 . . .26BASEASY.209 . . .26BASEASY.210 . . .26BASEASY.211 . . .26BASEASY.220 . . .26BASEASY.221 . . .26BOLT.1004 . . . . . .30,36BRKT.128 . . . . . .30,34BRKT.137 . . . . . .36BRKT.138 . . . . . .29BRKT.143 . . . . . .36BRKT.152 . . . . . .38BRKT.156 . . . . . .31BRKT.478 . . . . . .29BRKTASY.101 . . .14,30BRKTASY.107 . . .30,36BRKTASY.118 . . .38BRKTASY.155 . . .38BUMPER.103 . . .21BUSH.102 . . . . . .13,16,

18,29BUSH.103 . . . . . .14,16,

18BUSH.107 . . . . . .27BUSH.108 . . . . . .16BUSH.109 . . . . . .13,16,

29,36CAM.102 . . . . . . .13,16,

18,29CAMASY.101 . . .34CASE.209 . . . . . .15,19CASE.210 . . . . . .15,19CASE.211 . . . . . .20CASE.213 . . . . . .15,19CASE.214 . . . . . .15,19CASE.215 . . . . . .15,19CASE.216 . . . . . .15,19CASE.217 . . . . . .15,19CASE.218 . . . . . .15,19CASE.220 . . . . . .15,19CASE.221 . . . . . .15,19CASE.222 . . . . . .15,19CASE.223 . . . . . .15,19CASE.224 . . . . . .20CASE.225 . . . . . .20CASE.226 . . . . . .20CASE.228 . . . . . .20CASE.229 . . . . . .20CASE.230 . . . . . .15,19CASE.231 . . . . . .15,19CASE.232 . . . . . .15,19CASE.233 . . . . . .15,19

CASE.234 . . . . . .20CASE.235 . . . . . .20CASE.236 . . . . . .20CASE.237 . . . . . .20CASE.238 . . . . . .20CASE.239 . . . . . .20CASE.240 . . . . . .20CASE.241 . . . . . .20CASE.242 . . . . . .20CASE.243 . . . . . .20CBAR.101 . . . . . .15,20CBAR.102 . . . . . .15,20CBAR.116 . . . . . .15,20CBAR.120 . . . . . .15,20CBAR.132 . . . . . .15,20CBAR.135 . . . . . .15,20CBAR.143 . . . . . .15,20CBAR.148 . . . . . .15,20CBAR.160 . . . . . .15,20CBAR.206 . . . . . .15,20CBAR.207 . . . . . .15,20CBAR.208 . . . . . .15,20CBAR.209 . . . . . .15,20CHASY.107 . . . . .37CHASY.108 . . . . .37CHASY.109 . . . . .37CHASY.125 . . . . .37CHASY.147 . . . . .37CHASY.158 . . . . .37CHASY.160 . . . . .37CHASY.207 . . . . .37COVER.113 . . . . .29COVER.120 . . . . .34COVER.127 . . . . .36CTUBE.232 . . . . .28CYLASY.1083 . . .31CYLASY.1151 . . .34ECAP.103 . . . . . .22ECAP.111 . . . . . .22ECAP.129 . . . . . .30,34ECAP.130 . . . . . .29,34ECAP.143 . . . . . .36EXT.2244 . . . . . . .37EXT.2289 . . . . . . .31EXT.2294 . . . . . . .31EXT.2298 . . . . . . .31EXT.2303 . . . . . . .31EXT.2304 . . . . . . .31EXT.2323 . . . . . . .31EXT.2324 . . . . . . .31EXT.2333 . . . . . . .31EXT.2334 . . . . . . .31EXT.2338 . . . . . . .31

INDEX by Part NumberPart No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page





EXT.2339 . . . . . . .31EXT.2340 . . . . . . .31EXT.2341 . . . . . . .31EXT.2345 . . . . . . .31EXT.2349 . . . . . . .31EXT.2350 . . . . . . .31EXT.255 . . . . . . . .22EXT.256 . . . . . . . .22EXT.257 . . . . . . . .22EXT.258 . . . . . . . .22EXT.259 . . . . . . . .22EXT.261 . . . . . . . .22EXT.2927 . . . . . . .37EXT.2949 . . . . . . .37EXT.2950 . . . . . . .37EXT.2951 . . . . . . .37EXT.3000 . . . . . . .37EXT.3001 . . . . . . .37EXT.3002 . . . . . . .37EXT.3003 . . . . . . .37EXT.3004 . . . . . . .37EXT.3005 . . . . . . .37EXT.3006 . . . . . . .37EXT.3007 . . . . . . .37EXT.3008 . . . . . . .37EXT.3009 . . . . . . .37EXT.3010 . . . . . . .37EXT.3011 . . . . . . .37EXT.3012 . . . . . . .37EXT.3013 . . . . . . .37EXT.3014 . . . . . . .37EXT.3015 . . . . . . .37EXT.3050 . . . . . . .37EXT.3051 . . . . . . .37EXT.3052 . . . . . . .37EXT.3053 . . . . . . .37EXT.3054 . . . . . . .37EXT.3055 . . . . . . .37EXT.3056 . . . . . . .37EXT.3057 . . . . . . .37EXT.398 . . . . . . . .31EXT.399 . . . . . . . .31EXT.400 . . . . . . . .31EXT.438 . . . . . . . .31EXT.439 . . . . . . . .31EXT.440 . . . . . . . .37EXT.441 . . . . . . . .31EXT.442 . . . . . . . .31EXT.443 . . . . . . . .31EXT.444 . . . . . . . .31EXT.445 . . . . . . . .37EXT.450 . . . . . . . .37EXT.825 . . . . . . . .31EXT.826 . . . . . . . .31EXT.830 . . . . . . . .31EXTROD.1001 . . .36

GUIDE.101 . . . . .27GUIDE.102 . . . . .27HOUSING.123 . .38HOUSING.124 . .38HOUSING.125 . .38HOUSING.218 . .15HOUSING.225 . .15HOUSING.226 . .15HOUSING.229 . .15HOUSING.230 . .15HOUSING.231 . .15HOUSING.237 . .15HOUSING.238 . .15KEY.10020 . . . . . .24,29,

34,36KEY.101 . . . . . . . .14,16,

18KEY.102 . . . . . . . .21KIT.1008 . . . . . . .26KIT.1009 . . . . . . .26KIT.1010 . . . . . . .26KIT.1011 . . . . . . .26KIT.1012 . . . . . . .26KIT.1013 . . . . . . .26KIT.1128 . . . . . . .36KIT.1156 . . . . . . .31KIT.1157 . . . . . . .31KIT.1197 . . . . . . .30,34,

36LARM.173 . . . . . .15,19LARM.174 . . . . . .15,19LARM.175 . . . . . .15,19LARM.176 . . . . . .15,19LARM.177 . . . . . .15,19LARM.178 . . . . . .15,19LARM.179 . . . . . .15,19LARM.180 . . . . . .15,19LARM.181 . . . . . .15,19LARM.182 . . . . . .15,19LARM.183 . . . . . .15,19LARM.184 . . . . . .15,19LARM.185 . . . . . .15,19LARM.186 . . . . . .15,19LARM.187 . . . . . .15,19LARM.188 . . . . . .15,19LARM.189 . . . . . .19LARM.197 . . . . . .19LARM.199 . . . . . .19LARM.201 . . . . . .19LARM.203 . . . . . .19LARM.205 . . . . . .19LARM.207 . . . . . .19LARM.208 . . . . . .19LARM.209 . . . . . .19LARM.210 . . . . . .19LARM.211 . . . . . .19

LARM.212 . . . . . .19LARM.213 . . . . . .19LARM.214 . . . . . .19LARM.215 . . . . . .19LARM.216 . . . . . .19LATCHR.102 . . . .26LBOLT.105 . . . . . .34LEVER.103 . . . . .26LEVER.104 . . . . .26LEVER.105 . . . . .26NUT.101 . . . . . . .14,27,

30,36NUT.103 . . . . . . .26PIN.104 . . . . . . . .14,16,

18PIN.106 . . . . . . . .13,18PIN.109 . . . . . . . .14,16,

30,36PIN.110 . . . . . . . .14,16,

30,36PIN.115 . . . . . . . .13,16,

18PIN.116 . . . . . . . .18PIN.128 . . . . . . . .30,34,

36PKG.102 . . . . . . .22PKG.104 . . . . . . .22PKG.105 . . . . . . .22PKG.133 . . . . . . .34PKG.134 . . . . . . .36PKG.135 . . . . . . .36PKG.150 . . . . . . .29PKG.151 . . . . . . .29PLUNGER.101 . .26,31,

34,36RETAIN.101 . . . . .14RETAIN.102 . . . . .14,18RETRACT.101 . . .14,16,

29RETRACT.102 . . .18RING.108 . . . . . .16RIVET.101 . . . . . .38ROD.1011 . . . . . .36ROD.1036 . . . . . .36ROD.1043 . . . . . .36ROD.1044 . . . . . .36ROD.1080 . . . . . .36ROD.1082 . . . . . .36RODASY.10001 . .37RODASY.10002 . .37RODASY.10003 . .37RODASY.10004 . .37RODASY.10005 . .37RODASY.10006 . .37RODASY.10007 . .37RODASY.10008 . .37RODASY.10009 . .37

RODASY.10010 . .37RODASY.10011 . .37RODASY.10012 . .37RODASY.10013 . .37RODASY.10014 . .37RODASY.1075 . . .30RODASY.110 . . . .27RODASY.112 . . . .27RRING.102 . . . . .18RRING.103 . . . . .14,16,

18,27RRING.104 . . . . .24,26RRING.105 . . . . .24,26RRING.109 . . . . .13,16,

29,36RRING.112 . . . . .26,31,

34SCREW.1012 . . .21SCREW.1015 . . .13,18SCREW.1016 . . .38SCREW.1022 . . .13,16,

18SCREW.1025 . . .30,34SCREW.1027 . . .13,16,

18SCREW.1028 . . .13,16,

21,27,29, 36

SCREW.1029 . . .13,27,29,36

SCREW.1030 . . .14,16,18

SCREW.1031 . . .18SCREW.1032 . . .16,38SCREW.1037 . . .14,30SCREW.1038 . . .38SCREW.1039 . . .14,18SCREW.1043 . . .24SCREW.1050 . . .21SCREW.1053 . . .21SCREW.1055 . . .21SCREW.1061 . . .26SCREW.1063 . . .26SCREW.1065 . . .26SCREW.1066 . . .21SCREW.1067 . . .30SCREW.1068 . . .30SCREW.1069 . . .29SCREW.1070 . . .30,34SCREW.1072 . . .30,34SCREW.1074 . . .29SCREW.1075 . . .34SCREW.1076 . . .14,30,

36SCREW.1077 . . .30,34,

36SCREW.1081 . . .14,30,

36

SCREW.1082 . . .38SCREW.1083 . . .38SCREW.1084 . . .38SCREW.1085 . . .38SCREW.1088 . . .36SCREW.1099 . . .28SCREW.1105 . . .28SCREW.1114 . . .31,36SCREW.1121 . . .31,34,

36SCREW.1136 . . .24,26SCREW.1141 . . .30,34,

36SCREW.1143 . . .21,30,

34SCREW.1150 . . .34SCREW.1282 . . .21SHAFT.101 . . . . .31,34SHIM.112 . . . . . .16,38SHIM.150 . . . . . .38SLIDER.101 . . . . .34SOLENOID.142 . .26SPACER.107 . . . .34SPRING.102 . . . .14,16,

18SPRING.103 . . . .14,16,

18SPRING.104 . . . .18SPRING.105 . . . .28SPRING.127 . . . .24STUD.101 . . . . . .13,16,

18STUD.102 . . . . . .38SWITCH.1002 . . .26SWITCH.1004 . . .26SWITCH.1006 . . .31,34,

36WASHER.102 . . .24,26WASHER.103 . . .24,26WASHER.107 . . .24WASHER.108 . . .28WASHER.109 . . .28WASHER.110 . . .28WASHER.113 . . .26WASHER.116 . . .27WASHER.120 . . .38WASHER.121 . . .38WRENCH.101 . . .14,16,

18

INDEX by Part NumberPart No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page

Price Book 2011A • Effective July 18, 2011 • Rev. 7/11 1

TABLE OF CONTENTSHow to Order Closers ................................. 1Available Finishes........................................ 1Common Applications................................. 2SC Series Options ....................................... 3SC Series Surface Mount ........................... 4

HOW TO ORDER SC SERIES CLOSERS, COMPONENTS, & ACCESSORIES1. The SC60, SC70 & SC80 Series Closers are each certified to meet the requirements of ANSI Standard A156.4, Grade 1. The SC90 Series

Closers are certified to meet the requirements of ANSI Standard A156.4, Grade 3.

2. All SC Series Closers are available in AL (689) and DKBRZ (695). BRASS(696) may be available but with longer leadtime. Consult factory for details.

3. SC80 Series Closers are shipped with a standard ‘slim cover’ unless an optional ‘full cover’ is specified. SC60 Series Closers are shipped ‘less cover’ unless an optional ‘slim cover’ is specified. SC90 Series Closers are shipped ‘less cover’ unless an optional ‘slim cover’ is specified.

4. All SC Series Closers are furnished with a TBWMS fastener pack.

5. All SC60 and SC80 Series Closers are packed with six (6) identical closers per master carton.

SC70 Series Closers are packed with four (4) identical closers per master carton.

HOW TO ORDER THE OHC100 SERIES CLOSERS, COMPONENTS & ACCESSORIES1. OHC100 Series Closers are available with cylinders that allow either a 90° or 105° of door swing. Please specify at time of order.

2. The OHC100 Series Closer is UL listed.

3. The OHC101 Series Closer is ADA compliant. The OHC100 is not ADA compliant.

4. An OHC100 Series cylinder body will always be DKBRZ.

5. The OHC100 Series would be a retrofit for the following models; Norton 4900, Jackson 20-330, Global TC7000, International 100 or 200 and the Kawneer Husky II.

6. The OHC100 Series ‘A’ Style arm is an ‘end load’ arm, the ‘S’ Style arm is a ‘side load’ arm and ‘VO’ Style is used on doors hung with offset pivots or butt hinges.

FALCON Customer Care & Technical Support Phone (877) 671-7011

Fax New Orders (800) 452-0665

Parts and Components ............................... 5OHC Series Concealed ................................ 68200 Series Auto Operator ......................... 7Warranty ..................................................... 8


AL (BHMA 689) Aluminum

DKBRZ (BHMA 695)Dark Bronze

S T A N D A R D F I N I S H E S

BRASS (BHMA 696) (Extra Lead Time - Consult Factory)

O P T I O N A L F I N I S H



COMMON APPL ICAT IONS

SC70 Series Heavy Commercial / Exterior DoorCommercial / Interior DoorAluminum Store Front

SC80 Series Medium Commercial / Exterior DoorCommercial / Interior DoorAluminum Store Front

SC60 Series Light-Medium Commercial / Exterior DoorCommercial / Interior DoorAluminum Store Front

SC90 Series Light Commercial / Interior DoorAluminum Store Front

OHC100 Series Medium Aluminum Store FrontRetail

Series Duty Appl icat ions


SC Closer ConfigurationTo meet your unique requirements, SC closers can be configured by selecting specific options.To verify availability of options please contact customer service.

Cylinder Options■ STD (standard cylinder) - Standard cylinder provides a main speed function to control the motion of the

door from maximum opening angle until the door is a few inches from the latch where function controls the final closing motion. The opening swing iscontrolled by the hydraulic backcheck function from about 70˚ to maximum opening angle.

■ DEL (delayed action cylinder) - Special cylinder provides a separate delayed closing motion from maximum opening angle to approximately 70˚. Then themain speed function controls the door motion until the door is a few inches from the latch where latch function controls the final closing motion. Duringthe opening swing, the door is controlled by the hydraulic backcheck function from about 70˚ to maximum opening angle.

Cover Options■ FULL - Cover encloses the closer body and the unused pinion shaft.■ SLIM - Cover encloses the closer body with a cap on the unused pinion shaft.

Arm Options■ Rw/PA (regular arm with parallel arm bracket) - Nonhold-open arm with adjustable

forearm assembly to accommodate a range of door and frame reveal conditions. Includes PA bracket to allow installation in a parallel arm configuration.

■ Hw/PA (hold open arm with parallel arm bracket) - Hold-open arm with adjustable forearm assembly to accommodate a range of door and frame reveal conditions.

■ HD (heavy duty arm) - Heavy-duty, parallel arm for use in high-traffic applications.■ DS (dead stop arm) - Heavy-duty, parallel arm includes a positive mechanical stop

and nonadjustable forearm assembly for high volume traffic or potentially abusive installation conditions.

■ DS/HO (dead stop hold open arm) - Heavy-duty, parallel arm includes a positive mechanical stop and nonadjustable forearm assembly for high volume traffic or potentially abusive installation conditions. Also includes a manually selective hold-open function.

■ SS (Spring N’ Stop) – Extra heavy–duty, forged constructed parallel arm includes an integral spring stop and non-adjustable forearm assembly for high volume traffic or potentially abusive installation conditions.

■ SS/HO (Spring N’ Stop Hold-Open) – Extra heavy–duty, forged constructed parallel arm includes an integral spring stop and non-adjustable forearm assembly for high volume traffic or potentially abusive installation conditions. Also includes a manually selectively hold-open function.

Fastener Pack■ TBWMS (thru bolts with wood machine screws) - Fasteners for installation on wood,

hollow metal or aluminum storefront-type doors. Thru bolts for installations on 1-3/4˝ thick, hollow core doors are included.

ADA Accessibility Requirements■ Closers are preset at the factory or can be configured by the installer to generate less than a 5lb opening force

on a 36˝ wide interior door to comply with the requirements of the ADA law, Sections 4.13.10 and 4.13.11, and ANSI Standard A117.1, Sections 4.13.10 and 4.13.11.

■ Closers with the optional delayed closing cylinder also comply with the additional advisory suggestions of the ADA law, Section A4.13.10, and ANSIStandard A117.1, Section A4.1310.

Rw/PA

Hw/PA

DS

HO/DS

HD

SS

SS/HO



COMPLETE CLOSERS

SC60 SeriesSC61 ....................................................................................Rw/PA $190 7SC61....................................................................................Hw/PA 216 7SC61 ....................................................................................HD/PA 216 7SC61..........................................................................................DS 236 9SC61 ...................................................................................DS/HO 262 9SC61 ..........................................................................................SS 309 9SC61....................................................................................SS/HO 345 9Add for; Slim Cover (SLIM) ($15), Delayed Action (DEL) ($30). BRASS (696) finish may be available at an extended lead time (consult factory).

SC70 SeriesSC71 ....................................................................................Rw/PA $344 10SC71....................................................................................Hw/PA 370 10SC71 ....................................................................................HD/PA 370 11SC71..........................................................................................DS 390 11SC71 ...................................................................................DS/HO 416 12SC71 ..........................................................................................SS 463 12SC71....................................................................................SS/HO 499 12Full Cover is Standard. Add for; Delay Action (DEL) ($30). BRASS (696) finish may be available at an extended lead time (consult factory).

SC80 SeriesSC81 ....................................................................................Rw/PA $274 8SC81....................................................................................Hw/PA 300 8SC81 ....................................................................................HD/PA 300 10SC81..........................................................................................DS 320 10SC81 ...................................................................................DS/HO 346 10SC81 ..........................................................................................SS 393 10SC81....................................................................................SS/HO 429 10SC80 Series Closers ship with 'slim' cover unless 'full' cover is specified.Add for; Full Cover (FC) ($5), Delayed Action (DEL) ($30)BRASS (696) finish may be available at an extended lead time (consult factory).

SC90 SeriesSC91, SC93, or SC94..........................................................Rw/PA $135 5SC91 or SC94 .....................................................................Hw/PA 161 5Add for: Standard Cover (STD) ($10) (N/A on SC91)BRASS (696) finish may be available at an extended lead time (consult factory).

SC60 Series

SC80 Series(w/ full cover shown)

SC90 Series(SC91 shown)

SC70 Series

SC SERIES CLOSERS

PRICE LIST

CLOSER SERIES NUMBER

SERIES NUMBER ARM TYPE

ALL PRICES IN U.S. DOLLARS

STANDARDFINISHES

AL (689)DKBRZ (695)

SH WI EP IP GI HN TG

July2011



5

PARTS & COMPONENTSSC60 SeriesSC61-3071 ........................................................................Cylinder $120 9SC61-3071DEL .......................................................Delay Cylinder 150 9SC60-72........................................................................Slim Cover 15 1SC60-3077/PA.....................................Regular Arm w/PA Bracket 70 3SC60-3049/PA............................................HO Arm w/PA Bracket 96 3SC60-3077HD .........................................Heavy Duty Parallel Arm 96 3SC60-3077DS...........................................Dead Stop Parallel Arm 116 5SC60-3049DS ....................................HO Dead Stop Parallel Arm 142 5SC60-3077SS .................................................Spring 'N Stop Arm 189 5SC60-3049SS ..............................Spring 'N Stop Hold-Open Arm 225 5SC60-18 .............................................Mounting Plate - Top Jamb 30 2SC60-18PA.........................................Mounting Plate - Push Side 30 2SC60-30 .........................................................Cush Shoe Support 19 1SC60-61...........................................................Blade Stop Spacer 21 1SC60-62A .....................................................Offset Auxiliary Shoe 25 1SC70 SeriesSC71-3071 ........................................................................Cylinder $254 12SC71-3071DEL .......................................................Delay Cylinder 284 12SC70-72 .........................................................................Full Cover 20 1SC70-3077/PA.....................................Regular Arm w/PA Bracket 70 3SC70-3049/PA............................................HO Arm w/PA Bracket 96 3SC70-3077HD .........................................Heavy Duty Parallel Arm 96 3SC70-3077DS...........................................Dead Stop Parallel Arm 116 5SC70-3049DS ....................................HO Dead Stop Parallel Arm 142 5SC70-3077SS .................................................Spring 'N Stop Arm 189 5SC70-3049SS ..............................Spring 'N Stop Hold-Open Arm 225 5SC70-18................................................Narrow Frame Back Plate 50 3SC70-18PA .........................................Narrow Top Rail Drop Plate 50 4SC70-30 .........................................................Cush Shoe Support 19 1SC70-61...........................................................Blade Stop Spacer 21 1SC70-62A .....................................................Offset Auxiliary Shoe 25 1SC80 SeriesSC81-3071 ........................................................................Cylinder $189 10SC81-3071DEL .......................................................Delay Cylinder 219 10SC80-72........................................................................Slim Cover 15 1SC80-72FC ....................................................................Full Cover 20 1SC80-3077/PA.....................................Regular Arm w/PA Bracket 70 3SC80-3049/PA............................................HO Arm w/PA Bracket 96 3SC80-3077HD .........................................Heavy Duty Parallel Arm 96 3SC80-3077DS...........................................Dead Stop Parallel Arm 116 5SC80-3049DS ....................................HO Dead Stop Parallel Arm 142 5SC80-3077SS .................................................Spring 'N Stop Arm 189 5SC80-3049SS ..............................Spring 'N Stop Hold-Open Arm 225 5SC80-18 .............................................Mounting Plate - Top Jamb 30 2SC80-18PA.........................................Mounting Plate - Push Side 30 2SC80-30 .........................................................Cush Shoe Support 19 1SC80-61...........................................................Blade Stop Spacer 21 1SC80-62A .....................................................Offset Auxiliary Shoe 25 1SC90 SeriesSC90-18 .............................................Mounting Plate - Top Jamb 30 2SC90-18PA.........................................Mounting Plate - Push Side 30 2

SC60-18SC90-18

(SC94 only)

SC80-18PA

SC70-18

SC70-18PA

SC70-62ASC60-62ASC80-62A

Parts and Components

PRICE LIST




STANDARDFINISHES

AL (689)DKBRZ (695)


SC60-18PASC90-18PA(SC94 only)

SC80-18

July2011

NOTE - SC Series parts may be available in a BRASS (696) finishbut at an extended lead time (consult factory).


OHC100 Series - Overhead Concealed (90° - w/o Hold Open)OHC100 or OHC101 (SO90) ................................................EL-DP $203 16OHC100 or OHC101 (SO90) ....................................................VO* 203 16OHC100 or OHC101 (SO90) ................................................SL/GE 203 16

OHC100 Series - Overhead Concealed (90° - w/ Hold Open)OHC100 or OHC101 (HO90)................................................EL-DP $203 16OHC100 or OHC101 (HO90) ....................................................VO* 203 16OHC100 or OHC101 (HO90)................................................SL/GE 203 16

OHC100 Series - Overhead Concealed (105° - w/o Hold Open)OHC100 or OHC101 (S105).................................................EL-DP $203 16OHC100 or OHC101 (S105) .....................................................VO* 203 16OHC100 or OHC101 (S105).................................................SL/GE 203 16

OHC100 Series - Overhead Concealed (105° - w/ Hold Open)OHC100 or OHC101 (H105) ................................................EL-DP $203 16OHC100 or OHC101 (H105).....................................................VO* 203 16OHC100 or OHC101 (H105) ................................................SL/GE 203 16

OHC100 Closers are Grade 1 and adjustable size 3 to 5.OHC101 Closers are Grade 1 and adjustable size 1 to 3. OHC100 Series Closers utilize a 'Hold-Open' feature within the cylinder assembly.*VO Style offset arm and track available in (AL) (689) or (DKBRZ) (695)

“S”

“A”

“VO”

“FB”

GE Pivot

DP Pivot

PARTS & COMPONENTS

OHC100 SeriesOHC100 or OHC101-S090 .........................Standard 90° Cylinder $176 12OHC100 or OHC101-H090 ......................Hold Open 90° Cylinder 176 12OHC100 or OHC101-S105 .......................Standard 105° Cylinder 176 12OHC100 or OHC101-H105 ....................Hold Open 105° Cylinder 176 12OHC100-FB ...................................Mounting Bracket & Hardware 14 1OHC100-EL .....................................................“A” Style End Load 46 2OHC100-SL ............................................“S” Style Side Load Arm 32 2OHC100-VO..................................“VO” Style Offset Arm & Track* 46 4OHC100-GE ............................................Center Hung Floor Pivot 25 2OHC100-DP ............................................Center Hung Floor Pivot 25 2

OHC100 Series Closers utilize a 'Hold-Open' feature within the cylinder assembly.*VO Style offset arm and track available in (AL) (689) or (DKBRZ) (695)


OHC100 SERIES

PRICE LIST




STANDARDFINISH


July2011


8230 Series

8240 Series

FALCON OPERATORS

8230 Series – Falcon8231…………………STD (Pull) $2,054 AL only 41Ships with standard 26” length cover. For parts and accessories, see below.

8240 Series – Falcon8242…………………REG (Push) 2,054 AL only 41Ships with standard 26” length cover. For parts and accessories, see below.

8310 Series Actuators & Accessories6” Round – Text w/ Logo

8310-852T………. Push Plate, Wall Mount $1998310-869F………..Mounting Box, Flush 1218310-869S………..Mounting Box, Surface 1218310-802………… Weather Ring 17

1 ½” x 4 ¾” Jamb – Text w/ Logo

8310-818T………. Push Plate, Jamb Mount $1298310-819F………..Mounting Box, Flush 298310-819S………..Mounting Box, Surface 29

Wireless Transmitters & Receiver

8310-844……….... Transmitter, Wall Mount $1488310-844J……….. Transmitter, Jamb Mount 1488310-861 …………Transmitter, Handheld 1488310-865………..... Receiver 155

8310-852T

8310-818T

8310-844

8310-865

8200 Parts List8230 Series

8230-3077T ................................Standard Arm $1758230-3077PLCM..........Standard Arm w/Track 2258230-3038................................................Track 608230-72MC ..................................Metal Cover 3508230-MS........................................Screw Pack 208230-3018............................Mounting Bracket 2308230-3034 ....................................Track Roller 158230-3155 ..........................................Label Kit 198230-3454 ..............Motor Gearbox Assembly 1,6798230-3462 ....................................Control Box 1,0798230-3498-2A ......................A/C Power Cable 35

8240 Series

8240-3077 ....................................Regular Arm $1508240-72MC ..................................Metal Cover 3508240-MS........................................Screw Pack 208240-3018............................Mounting Bracket 2308240-79......................................................Rod 408240-77 ............................................Main Arm 1558240-3155 ..........................................Label Kit 198240-3454 ..............Motor Gearbox Assembly 1,6798240-3462 ....................................Control Box 1,0798240-3498-2A ......................A/C Power Cable 35


NOTE - Additional actuators and accessories are available through LCN - pleasesee the LCN Price List.

8200 SERIES AUTOMATIC OPERATOR

PRICE LIST




FINISH

AL (689)


July2011


121 West Railroad AvenuePrinceton, IL 61356

WARRANTYFalcon warrants its products manufactured to be free from defects in materials and workmanship for a period of ten (10) years from the date of manufacturer, except for the OHC100 products, which have a five (5) year limited warranty (see Tablebelow for warranty periods).

PRODUCTS YEARS

SC60, SC70, SC80 AND SC90 SURFACE CLOSERS 10 YEARS

OHC100 CONCEALED CLOSERS 5 YEARS

8230/8240 SERIES OPERATORS 1 YEAR

This limited warranty does not cover products that (i) are not the proper size for the application; (ii) are not installed in accordance with Falcon published installation instructions; (iii) are installed with improper or incorrect parts [Note: It is recommended that the products be installed with the Falcon fasteners provided with the product.]; (iv) have been, in theopinion of Falcon, modified, repaired, or altered in any way without the express written consent of Falcon; (v) are used for purposes which they are not designed or intended; or (vi) are subjected to misuse, abuse, negligence, or accident. The following costs and expenses are not covered by the provisions of this limited warranty: (i) labor costs for the removal and reinstallation of products; (ii) shipping and freight expenses required to return products to Falcon; (iii) normal maintenance; and (iv) economic losses.

Falcon will replace the products which, in the opinion of Falcon, are found to be defective, provided said products are returned to Falcon, Warranty and Replacement Department, 121 West Railroad Avenue, P.O. Box 100, Princeton, Illinois USA61356-0100.

FALCON SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES FOR ANY CLAIM WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

This limited warranty is in place of all other warranties, expressed or implied, and excludes any warranties of fitness for a particular purpose or merchantability. No agent, representative, dealer, or employee of Falcon has the authority to increase or alter the obligations of this limited warranty.

Note: Should the Product be considered a “consumer product” as may be covered by the Magnuson-Moss Federal Warranty Act,please be advised that: (1) Some states do not allow limitations on incidental or consequential damages or how long an implied warranty lasts, so that the above limitations may not fully apply; and (2) This warranty gives specific legal rights and a user may have other rights which may vary from state to state.

© 2011 Ingersoll Rand FA-5137 Rev. 7/11 Printed in U.S.A.

877-671-7011 www.falcon.ingersollrand.com www.ingersollrand.com

Ingersoll Rand's Security Technologies Sector is a leading global provider of products and services that make environments safe, secureand productive. The sector's market-leading products include electronic and biometric access-control systems; time-and-attendance andpersonnel scheduling systems; mechanical locks; portable security; door closers, exit devices, architectural hardware, and steel doors andframes; and other technologies and services for global security markets.

Falcon.pb July 2011

Documents

Transcript of Falcon.pb July 2011