Facade catalogue Innovative fastening systems and ... · Facade catalogue Innovative fastening...

Facade catalogueInnovative fastening systems and application expertise

1

2

3

4

5

Table of contents

Glass Facade Systems

Tools And Accessoires

08/2011

Rainscreen Cladding m2 / m3 / MQL / MQLK / MB / MBK / MBR MBRK / MBR-X / MBRK-X / MDH / MDD

SW-T / SW3-T-H15 / SD / SD-H15 / SLA SX / SDA / ASO

AP / ASO / SSO / SLA-D12 / TW-S / TW-A4SX / GA-AS / GA-BS / SCFW-S / SDF2-S / TU-S

Corner bracket B / SDS drill bits / HSS drill bits EPDM / PFS-K / PFS-Q / PFR / PF-Z / PV

ALW-S1 / ALW-S2 / ALW-D / ALW-L1ALW-L2

VDS kit Large / VDS kit MediumVDS kit Small / Single components

Brickwork fastening

Subframe fastening

Panel fastening

Ancillaries

System ALW

Canopy System VDS

DI 650 / DB 620 / Lazy tongs RM-25 Lever tool RM-20 / AccuBird®

PowerBird®

Tools and accessories

Services and

Business solutions

Attachment

News for

your success.

08/2011

From their Swiss HQ in Heerbrugg, the SFS Group operates internationally within four divisions:SFS intec, SFS unimarket, SFS locher and SFS services.

SFS intec serves the global engineering sub-contract and construction markets with high precision components. The division develops, manufactures and markets from four focused operating units:

AutomotiveProducts:

Offering precision custom components to the automotive industry and its supply base: including cold formed parts, deep drawing and demanding plastic injection mouldings, as well as metal-to-plastic combinations.

IndustrialProducts:

Serving the electrical and electronics industries, the aircraft sector and the architectural hardware and machine tool businesses with ready-to-fit special screws and components.

FasteningSystems:

Furnishing the building trades and their supply base with systems for mechanical fixing. Supplying primarily producers of doors and windows with mechanical fixing systems and hinges and the transport sector with made-to-measure installation solutions.

Whether as a component supplier or service provider, SFS intec constantly strives to forge value-added chains with suppliers and customers alike. The ability to develop and continuously improve products and processes to the mutual benefit of our business partners and ourselves is a core factor in maintaining our competitive edge and therefore the success of SFS intec and our partners.

© S

FS in

tec,

iRC

, 08/

11, 9

04 4

60, E

Te

chni

cal c

hang

es r

eser

ved

Prin

ted

in S

witz

erla

nd

1

19

1.08/2011

Rainscreen cladding Fasteners and rivets

1Application Product code Page

Lining panel Corner bracket B � 1.2

Drill bits SDS � 1.3

Lining panel m2 / m2-S4 / m3 � 1.4

Universal plug MQL / MQLK � 1.7

Hollow brick, masonry MB / MBK � 1.9

Concrete, solid brick MBR / MBRK � 1.12

Concrete, high performanceMBR-X

MBRK-X � 1.15

Insulation Anchors MDH / MDD � 1.17

Steel substructure

SW-T

SW3-T-H15 / SD

SD-H15

� 1.19

Aluminium frameworkSLA / SX / SDA

ASO � 1.23

High performance cladding to

aluminium and steel frameworkAP / ASO / SSO � 1.26

Aluminium framework SLA-D12 � 1.30

Non metallic high performance

cladding panel to timber battenTW-S / TW-A4 � 1.32

Sealing joint EPDM � 1.34

Steel substructure SX � 1.35

Special aesthetical fasteningGA-AS

GA-BS � 1.37


cladding panel to timber battenSCFW-S � 1.39


cladding to steel frameworkSDF2-S � 1.41

Blind fastening of HPL-cladding

panelsTU-S � 1.43

ProfilesPFS-K / PFS-Q

PFR / PF-Z / PV � 1.45

2

1

Rainscreen cladding

Corner bracket B

Corner bracket

Corner bracket for lining

Corner bracket B

Technical information

Application

Corner bracket for fixing beams or metal structures to the support structure.

Fixing

Fissaggio

Corner bracket BGalvanised steel measuring 25/100 mm (in compliance with DX51D + Z according to EN 10142) Two-face lining in Z275

Order Code

B 50-T

Application Product Type L KL Application range

�� Carbon steel BBBBBBBBBBBBBBBBBBBBBBBB

50-T60-T70-T80-T90-T100-T110-T120-T130-T140-T150-T160-T170-T190-T200-T210-T220-T240-T250-T260-T270-T280-T290-T300-T

Fixed width A of 50 mm Length L. variable from 50 to 300 mm Fixed height H of 60 mm

8.5x30 mm and 8.5xL mm slot holes Holes dia Ø 6.5

08/20111.

Tools and accessories can be found in chapter 3

3

1

1.08/2011

Rainscreen cladding

SDS

Hammer drill bits SDS

Drill bits

Order information

F

d

L

SDS Carbide-geometry Dynamic, chisel-shaped drill bit head Multi-fluted, spacious KVS-spiral Unique KVS-flute design

d diameter | L Length | F working length | All measures in mm

Order codeSDS- 8,0x 110/ 50- 4PLUS

Type d L F Code F Application range

SDS-SDS-SDS-SDS-

8,0x8,0x8,0x8,0x

110/160/210/260/

50-100-150-200-

4PLUS4PLUS4PLUS4PLUS

50

100

150

200

m2

m3 MDH

SDS-SDS-SDS-SDS-SDS-

10,0x10,0x10,0x10,0x10,0x

110/160/210/260/310/

50-100-150-200-250-

4PLUS4PLUS4PLUS4PLUS4PLUS

50

100

150

200

250

MQLMBRMBMDD


4

1

Rainscreen cladding

Fasteners m2

Fasteners for corner brackets

Fasteners for corner brackets onto concrete

08/20111.

m2


Application

Fixing the corner brackets of the beams or metal structures onto concrete. Recommended materials: Concrete C20/25 with crush strength of 25N/mm2

Material

Fastener

Fastener m2 Pin in white galvanised steel / ex-pansion bush in stainless steel A2

Washer 15 mm in galvanised steel/nut in white galvanised steel

Order code

m2- 8,0x 80

Application Product Type d L t�� Application range

�� Carbon steel m2-m2-

8,0x8,0x

8095

10

25

Minimum anchorage depth h1: 50 mm

Assembly recommendations: The metal fastener must be positioned in the upper slotted hole

Fire resistance

Drill bit for concrete: Ø 8mm: SDS4–Plus–8xL


5

1

m2-S4


Application


Material

Fastener

Fastener m2-S4Pin in stainless steel A4 / expansion bush in stainless steel in A4

Washer 15 mm in stainless steel A4 hex nut in stainless steel A4

Order code

m2-S4- 8,0x 80


�� Stainless steel A4 m2-S4-m2-S4-

8,0x8,0x

8095

10

25



Fire resistance


1.08/2011

Rainscreen cladding

Fasteners m2-S4




6

1

08/20111.

m3


Application


Material

Fastener

Fastener m3 Pin in white galvanised steel / ex-pansion bush in stainless steel A2

Washer 15 mm in galvanised steel/nut in white galvanised steel

Order code

m3- 8,0x 80


�� Carbon steel m3-m3-m3-

8,0x8,0x8,0x

8095115

15

30

50



Fire resistance


Rainscreen cladding

Fasteners m3




7

1

MQL / MQLK


Application

Anchoring facade structure of metal or timber:- vertically perforated brick- chalky perforated sandstone- full brick of light concrete- universal mounting- concrete- solid brick- natural stone

Material

Fastener

MQL / MQLKAnchor sleeve: High value Polyamide Screw: S = Stainless steel, grade AISI 316 (European Standard 1.4401) T = Steel 5.8, electrogalvanize

Drive: T40 = Countersunk TORX® T40 HX = Hexagonal 13 mm

HD headform / drive

T40 recess Hexagon 13 mm A/F Hexagon H18 13 mm A/F


DB 620

Hammer drilling machine for pre-drilling concrete and masonry.

DI 650

Lightweight power screwgun for in-stalling self drilling and self tapping fasteners.

1.08/2011

Pannello di rivestimento

Tasselli d'ancoraggio m3

Facade anchors

Universal plug

1.08/2011

Rainscreen cladding

MQL / MQLK


8

1

1. 08/2011

Rainscreen cladding

MQL / MQLK

Facade anchors

Universal plug

Order information

KLL

d

T40 recess Hexagon 13 mm A/F

Hexagon H18 13 mm A/F

VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm

Order codeMQL- T40- 10,0x 80

Application Product Approval Type HD d L KL Application range

�� Carbon steel MQL-MQL-MQL-MQL-MQL-MQL-MQL-

T40-T40-T40-T40-T40-T40-T40-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x

80100120140160180200

10

30

50

70

90

110

130

Anchoring depth min. 70 mm embedment Area of application - vertically perforated brick- chalky perforated sandstone- full brick of light concrete- universal mounting- concrete- solid brick- natural stone

�� Carbon steel MQL-MQL-MQL-MQL-MQL-MQL-MQL-

HX-HX-HX-HX-HX-HX-HX-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x

80100120140160180200

10

30

50

70

90

110

130


�� Carbon steel MQLK-MQLK-MQLK-

H18-H18-H18-

10,0x10,0x10,0x

80100120

10

30

50


�� Stainless steel A4 MQL-S4-MQL-S4-MQL-S4-MQL-S4-MQL-S4-MQL-S4-MQL-S4-

T40-T40-T40-T40-T40-T40-T40-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x

80100120140160180200

10

30

50

70

90

110

130



9

1

MB / MBK


Application

Anchoring facade structure of metal or timber: - vertically perforated brick - chalky perforated sandstone - full brick of light concrete - foam mortar

Material

Fastener

MB / MBKAnchor sleeve: High value Polyamide Screw: S = Stainless steel, grade AISI 316 (European Standard 1.4401) T = Steel 5.8, electrogalvanize


HD headform / drive



DB 620


DI 650


1.08/2011

Pannello di rivestimento

Tasselli d'ancoraggio m3

Facade anchors

Hollow brick, masonry

1.08/2011

Rainscreen cladding

MB / MBK


10

1

1. 08/2011

Rainscreen cladding

MB / MBK

Facade anchors


Order information

KLL

d

T40 recess Hexagon 13 mm A/F

Hexagon H18 13 mm A/F


Order codeMB-S4- T40- 10,0x 80


�� Stainless steel A4

DIBt

iegtZu assung

vor

MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-

T40-T40-T40-T40-T40-T40-T40-T40-T40-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

80100120140160200240280300

10

30

50

70

90

130

170

210

230

Anchoring depth min. 70 mm embedment Area of application - Vertically perforated brick - Chalky perforated sandstone - Hollow concrete - Full brick of light concrete


DIBt

iegtZu assung

vor

MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-

HX-HX-HX-HX-HX-HX-HX-HX-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

80100120140160200240300

10

30

50

70

90

130

170

230



DIBt

iegtZu assung

vor

MBK-S4-MBK-S4-

H18-H18-

10,0x10,0x

80100

10

30 Anchoring depth min. 70 mm embedment Area of application - Vertically perforated brick - Chalky perforated sandstone - Hollow concrete - Full brick of light concrete


11

1

1.08/2011

Rainscreen cladding

MB / MBK

Facade anchors


Order codeMB- T40- 10,0x 80


�� Carbon steel

DIBt

iegtZu assung

vor

MB-MB-MB-MB-MB-MB-MB-MB-MB-

T40-T40-T40-T40-T40-T40-T40-T40-T40-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

80100120140160200240280300

10

30

50

70

90

130

170

210

230


�� Carbon steel

DIBt

iegtZu assung

vor

MB-MB-MB-MB-MB-MB-MB-MB-MB-

HX-HX-HX-HX-HX-HX-HX-HX-HX-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

80100120140160200240280300

10

30

50

70

90

130

170

210

230


�� Carbon steel

DIBt

iegtZu assung

vor

MBK-MBK-MBK-

H18-H18-H18-

10,0x10,0x10,0x

80100120

10

30

50Anchoring depth min. 70 mm embedment Area of application - Vertically perforated brick - Chalky perforated sandstone - Hollow concrete - Full brick of light concrete


12

1

1. 08/2011

Rainscreen cladding

MBR / MBRK

Facade anchors

Concrete, solid brick

MBR / MBRK


Application

Anchoring facade structure of metal or timber: - concrete - solid brick - hollow concrete

Material

Fastener

MBR / MBRKAnchor sleeve: High value Polyamide Screw: S = Stainless steel, grade AISI 316 (European Standard 1.4401) T = Steel 5.8, electrogalvanize


HD headform / drive



DB 620


DI 650



13

1

1.08/2011

Rainscreen cladding

MBR / MBRK

Facade anchors


Order information

KLL

dT40 recess Hexagon

13 mm A/FHexagon H18

13 mm A/F


Order codeMBR-S4- T40- 10,0x 60



DIBt

iegtZu assung

vor

MBR-S4-MBR-S4-MBR-S4-MBR-S4-

T40-T40-T40-T40-

10,0x10,0x10,0x10,0x

60100120140

10

50

70

90

Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete


DIBt

iegtZu assung

vor

MBR-S4-MBR-S4-MBR-S4-MBR-S4-MBR-S4-MBR-S4-MBR-S4-MBR-S4-


10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

6080100120140160200240

10

30

50

70

90

110

150

190



DIBt

iegtZu assung

vor

MBRK-S4- H18- 10,0x 60 10



14

1

1. 08/2011

Rainscreen cladding

MBR / MBRK

Facade anchors


Order information

KLL

dT40 recess Hexagon

13 mm A/FHexagon H18

13 mm A/F


Order codeMBR- T40- 10,0x 60


�� Carbon steel

DIBt

iegtZu assung

vor

MBR-MBR-MBR-MBR-MBR-MBR-MBR-MBR-

T40-T40-T40-T40-T40-T40-T40-T40-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

6080100120140160200240

10

30

50

70

90

110

150

190


�� Carbon steel

DIBt

iegtZu assung

vor

MBR-MBR-MBR-MBR-MBR-MBR-MBR-MBR-


10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

6080100120140160200240

10

30

50

70

90

110

150

190


�� Carbon steel

DIBt

iegtZu assung

vor

MBRK-MBRK-MBRK-

H18-H18-H18-

10,0x10,0x10,0x

6080100

10

30

50Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete


15

1

1.08/2011

Rainscreen cladding

MBR-X / MBRK-X

Facade anchors

Concrete, high performance

MBR-X / MBRK-X


Application

Anchoring facade structure of metal or timber: - concrete - solid brick - hollow concrete

Material

Fastener

MBR-X / MBRK-XAnchor sleeve: High value Polyamide Screw: S = Stainless steel, grade AISI 316 (European Standard 1.4401) T = Steel 5.8, electrogalvanize


HD headform / drive

T40 recess Hexagon H18 13 mm A/F


DB 620


DI 650



16

1

1. 08/2011

Rainscreen cladding

MBR-X / MBRK-X

Facade anchors

Concrete, high performance

Order information

KLL

dT40 recess Hexagon H18

13 mm A/F


Order codeMBR-X-S4- T40- 10,0x 60



DIBt

iegtZu assung

vor

MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-

T40-T40-T40-T40-T40-T40-T40-T40-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

6080100120140160200240

10

30

50

70

90

110

150

190



DIBt

iegtZu assung

vor

MBRK-X-S4-MBRK-X-S4-

H18-H18-

10,0x10,0x

6080

10

30 Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete

�� Carbon steel

DIBt

iegtZu assung

vor

MBR-X-MBR-X-MBR-X-MBR-X-MBR-X-MBR-X-MBR-X-MBR-X-

T40-T40-T40-T40-T40-T40-T40-T40-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

6080100120140160200240

10

30

50

70

90

110

150

190


�� Carbon steel

DIBt

iegtZu assung

vor

MBRK-X-MBRK-X-

H18-H18-

10,0x10,0x

6080

10

30 Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete


17

1

Rainscreen cladding

MDH

Fixing insulation boards with plastic anchors

Insulation Anchors

1.


MDH


Application

Pressure-resistant insulating materials, mineral wool, glass wool- For general purpose use in soft insulation- Suitable for all substrates- Suitable for insulation thickness up to 210 mm- Through fixing- Do not use for overhead fixing

Material

Insulation anchor

MDH Ø 90 mmPlug: Plastic

Order information

L

d

d diameter | L overall length | SD Setting depth | All measures in mm

Order codeMDH- 8,0x 60

Applications Product Type d L SD Application range

�� Plastic MDH-MDH-MDH-MDH-MDH-MDH-MDH-MDH-MDH-MDH-

8,0x8,0x8,0x8,0x8,0x8,0x8,0x8,0x8,0x8,0x

6080100120140160

180*200*220*240*

20

20

20

20

20

20

30

30

30

30

1. Drill a pilot hole�� 3. Use a hammer for installation4. MDH has to be hammered precisely onto insulation

* two pieces

1

3

2

4

18

1

Rainscreen cladding

MDD

Fixing insulation boards with plastic anchors

Insulation Anchors

08/20111.


MDD


Applications

Pressure-resistant insulating materials, polyurethane rigid foam panels, polystyrenes, mineral wools - For general purpose use in hard and soft insulation pads - Suitable for all substrates - Anchor of insulation thickness up to 170 mm - Do not use for overhead fixing- with glass fibre reinforced plastic pin- Resistant to cold and heat- Through fixing

Material

Fastener

MDDPlug: Polyamide Thorn: Polyamide

Disc

MDD-VS: Disc for MDD Ø 90 mmPolyamide

Order information

L

d

d diameter | L overall length | SD Setting depth | All measures in mm

Order codeMDD- 10,0x 70

Applications Product Type d L SD Application range

�� Plastic MDD-MDD-MDD-MDD-MDD-MDD-MDD-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x

7090110130150180210

40

40

40

40

40

40

40

1. Drill a pilot hole �� 3. Drive-in the nail with a hammer 4. Nail has to be hammered precisely into the head

1

3

2

4

19

1

1.08/2011

Rainscreen cladding

SW-T / SW3-T-H15

Self drilling fasteners

Timber substructure

SW-T / SW3-T-H15


Application

Fastening profile steel sheeting to timber structure in one operation.

Material

Fastener

SW-TPlated carbon steel, case hardened

SW-H15Plated carbon steel, case hardened 15 mm diameter flange head

HD headform / drive

Hexagon 8 mm A/F


DI 650


E480

The E480 setting tool is recom-mended for installing self drilling fasteners with the hexagon head.


20

1

1. 03/2011

Rainscreen cladding

SW2-S / SW-T / SW3-T-H15


Timber substructure

Order information

KLL

d Hexagon 8 mm A/F


Order codeSW-T- 4,8x 35



�� Carbon steel SW-T- 4,8x 35VD max. steel:

1 x 1,0 mm3 x 0,75 mm

�� Carbon steel SW3-T- H15- 6,5x 50VD max. steel:

2 x 1,25 mm

Assembly recommendations:1 x SW3-T-H15-6,5x50 for long hole1 x SW-T-4,8x35 for normal hole

Assembly recommendations:3 x SW-T-4,8x35 for long hole Ø 6,5 mm

21

1

1.08/2011

Rainscreen cladding

SD / SD-H15


Steel substructure

SD / SD-H15


Application

Fastening profile steel sheeting to steel in one operation: drilling, thread forming and sealing.

Material

Fastener

SD Plated carbon steel, case hardened

SD--H15Plated carbon steel, case hardened 15 mm diameter flange head

HD headform / drive

Hexagon 8 mm A/F


DI 650


E480



22

1

1. 08/2011

Rainscreen cladding

SD / SD-H15

Carbon steel self drilling fastener

Steel substructure

Order information

KLL

d Hexagon 8 mm A/F


Order codeSD 5- H15- 5,5x 22

Application Product Approval Type VD HD d L KL Application range

�� Carbon steel SD 5- H15- 5,5x 22 10VD

t VD max. steel: 5,0 mm

t min. steel: 1,5 mm

�� Carbon steel SD 5- 5,5x 25 12VD

t VD max. steel: 5,0 mm



Assembly recommendations:1 x SD5-H15-5,5x22 for long hole1 x SD5-5,5x25 for normal hole

Assembly recommendations:2 x SD5-5,5x25 for normal hole

23

1

1.08/2011

Rainscreen cladding

SLA / SX / SDA / ASO


Aluminium framework



Application

Fastening aluminium framework and steel framework together within over cladding and curtain wall applications.

Material

Fastener

SLAAustenitic stainless steel, grade AISI 316 (European Standard 1.4578)

SXAustenitic stainless steel, grade AISI 304 (European Standard 1.4301) or grade AISI 316 (European Standard 1.4401) on request

ASO Body: Aluminium AIMg3 Mandrel: Stainless steel 1.4541

SDA Austenitic stainless steel, grade AISI 316 (European Standard 1.4578)

Washer

S = Stainless steel, grade AISI 304 (European Standard 1.4301)

A = Aluminium with vulcanised EPDM

Drill point and lead thread section

Case hardened, special carbon steel for SX products

milled drill point

Coloured fastener

Coloured fasteners available Colour heads are achieved through powder coating

HD headform / drive

Hexagon 8 mm A/F Low profile Ø 12 mm


DI 650


E480



24

1

1. 08/2011

Rainscreen cladding



Aluminium framework

Order information

KLL

d Hexagon 8 mm A/F Low profile Ø 12 mm Coloured fastener

W: Washer material S Stainless Steel A Aluminium


Order codeSLA 5/ 6- S4- 6,0x 19

Application Product Approval Type VD KL HD W* d L KL Application range

�� Stainless steel A4 SLASLA

5/4-5/6-

6-8-

S4-S4-

6,0x6,0x

1921

4 - 6

6 - 8 VD max. alu: 5,0 mm

t min. alu: 1,8 mm

Only for aluminium framework

�� Stainless steel

DTU 40.35DTU 40.36

SX 3/ 9- S16- 6,0x 29 9VD max. steel:

3,0 mm

t min. steel:2 x 0,63 - 0,9 mm

t max. steel: 2,5 mm

t min. alu: 2,0 mm

�� Stainless steel

DTU 40.35DTU 40.36

SXSX

5/5/

8-12-

S16-S16-

5,5x5,5x

3337

8

12VD max. steel:

5,0 mm



t min. alu: 2,0 mm

t max. alu: 4,0 mm

�� Stainless steel SX 5/ 12- D12- 5,5x 37 12 VDt VD max. steel:

5,0 mm



t min. alu: 2,0 mm

t max. alu: 4,0 mm

Bit: T25W

Karlsruher Institut für Technologie


25

1

1.08/2011

Rainscreen cladding



Aluminium framework

Order codeSX 5/ 12- D12- A12- 5,5x 37


�� Stainless steel SX 5/ 12- D12- A12- 5,5x 37 12 VDt VD max. steel:

5,0 mm

VD max. alu: 5,0 mm



t min. alu: 2,0 mm

t max. alu: 4,0 mm

Bit: T25W

�� Stainless steel A4 SDA 3/ 25-40- S4- S10/SR2- 4,8x 48 25 - 40

VD max. alu: 3,0 mm

Timber batten to aluminium


Order code

ASO- D11- 50080

Application Product Approval Type HD Code KL min. max. d x L Application range

�� Aluminium ASO-ASO-

D11-D14-

5008050120

2,0 - 4,0

5,0 - 9,5

5,0 x 8,0

5,0 x 12,0

Head diameter D: 11,0 mm


Pilot hole: Ø 5,1 mmKarlsruher Institut für Technologie

26

1

1. 08/2011

Rainscreen cladding

AP / ASO / SSO

Coloured rivets

High performance cladding to aluminium and steel framework

AP / ASO / SSO


Application

Face fixing of high performance cladding panel to aluminium and steel framework.

Material

Rivet

APBody: Aluminium AIMg5 Mandrel: Stainless steel 1.4541

ASOBody: Aluminium AIMg3 Mandrel: Stainless steel 1.4541

Rivet

SSOBody: Stainless steel 1.4578 Mandrel: Stainless steel 1.4571

Coloured fastener



AccuBird®

For standard blind rivets 2 - 5 mm and for Bulb-tite® rivets 4 - 6,3 mm.

Lever tool RM-20

Including 4 rivet nozzles. For rivet diameter: 3,0 - 5,0 mm.

Lazy tongs RM-25


Special nosepiece for AP, ASO and SSO rivets. Fits to AccuBird® and PowerBird®.

Handle for centered drill bit Ø 5,1 mm.

Drilling gauge for centered drill holes including drill bit Ø 5,1 mm. Replaceable top pieces with

different diameters available.


27

1

1.08/2011

Rainscreen cladding

AP / ASO / SSO

Coloured rivets

High performance cladding to aluminium and steel framework

Order information

L

d

d1 D

h

Coloured fastener

HD headform / drive | KL Grip range | d x L diameter / length | t thickness of structure | All measures in mm

Order code

AP11- 50120-S

Application Product Type HD Code KL min. max. d x L Application range

�� Aluminium AP11-AP11-

50120-S50180-S

4,0 - 8,0

9,5 - 13,5

5,0 x 12,0

5,0 x 18,0 Head diameter D: 11,0 mm

Pilot hole: Ø 5,1 mm

�� Aluminium AP14-AP14-AP14-AP14-

50120-S50160-S50180-S50210-S

4,0 - 8,0

8,0 - 12,0

9,5 - 13,5

12,5 - 16,0

5,0 x 12,0

5,0 x 16,0

5,0 x 18,0

5,0 x 21,0



�� Aluminium AP16-AP16-AP16-

50160-S50180-S50210-S

8,0 - 12,0

9,5 - 13,5

12,5 - 16,0

5,0 x 16,0

5,0 x 18,0

5,0 x 21,0Head diameter D: 16,0 mm


�� Aluminium ASO-ASO-ASO-ASO-ASO-ASO-ASO-

D11-D11-D11-D11-D11-D11-D11-

50080501005012050140501605018050200

2,0 - 4,0

4,0 - 6,0

5,0 - 9,5

8,0 - 10,0

10,0 - 12,0

12,0 - 14,0

14,0 - 16,0

5,0 x 8,0

5,0 x 10,0

5,0 x 12,0

5,0 x 14,0

5,0 x 16,0

5,0 x 18,0

5,0 x 20,0



�� Aluminium ASO-ASO-ASO-ASO-ASO-ASO-ASO-

D14-D14-D14-D14-D14-D14-D14-

50080501005012050140501605018050200

2,0 - 4,0

4,0 - 6,0

5,0 - 9,5

8,0 - 10,0

10,0 - 12,0

12,0 - 14,0

14,0 - 16,0

5,0 x 8,0

5,0 x 10,0

5,0 x 12,0

5,0 x 14,0

5,0 x 16,0

5,0 x 18,0

5,0 x 20,0



�� Stainless steel A4 SSO-SSO-SSO-

D15-D15-D15-

501405018050220

6,0 - 9,5

9,0 - 13,5

13,0 - 18,0

5,0 x 14,0

5,0 x 18,0

5,0 x22,0Head diameter D: 15,0 mm



28

1

1. 08/2011

Rainscreen cladding

Order information

f

d

L

d diameter | L Length | F working length | t thickness of structure | All measures in mm

Example order codeHSS- 5,10x 62

Type d L f Application range

HSS- 5,10x 62


29

1

1.08/2011

Rainscreen cladding

30

1

1. 08/2011

Rainscreen cladding

SLA-D12


Aluminium framework


SLA-D12


Application

Selfdrilling fastener for aluminium composite panels to aluminium framework.

Material

Fastener

SLA-D12Austenitic stainless steel, grade AISI 304 (European Standard 1.4301)

Coloured fastener


HD headform / drive

Low profile Ø 12 mm


DI 650


ZA 1/4‘‘

Universal socket to adapt different bits.

T20W Bit

Special T20 wedge bit for perfect fit on SFS intec painted fastener.

31

1

1.08/2011

Rainscreen cladding

SLA-D12


Order information

KLL

d Low profile Ø 12 mm Coloured fastener


Order codeSLA 3/ 6- S-D12- 4,8x 19

Application Product Type VD KL HD d L KL Application range

�� Stainless steel SLA 3/ 6- S-D12- 4,8x 19 6VD max. alu:

3,0 mm

Only for aluminium framework��Bit: T20W


Aluminium framework

32

1

1. 08/2011

Rainscreen cladding

TW-S / TW-A4

Austenitic stainless steel fasteners for timber battens

Non metallic high performance cladding panel to timber batten

TW-S / TW-A4


Application

Non metallic high performance cladding panel to timber batten.

Material

Fastener

TW-SAustenitic stainless steel, grade AISI 304 (European Standard 1.4301) with powder coated colour finish.

TW-A4Austenitic stainless steel, grade AISI 316 (European Standard 1.4578)

Washer


Coloured fastener


HD headform / drive

Low profile Ø 12 mm Low profile Ø 16 mm


DI 650


ZA 1/4‘‘


T20W Bit



33

1

1.08/2011

Rainscreen cladding

TW-S / TW-A4

Austenitic stainless steel fasteners for timber battens


Order information

KLL

d Low profile Ø 12 mm Low profile Ø 16 mm Coloured fastener


Order codeTW-S- D12- 4,8x 38

Application Product Type HD W* d L KL Application range

�� Stainless steel TW-S- D12- S12- 4,8x 38

Bit: T20W

�� Stainless steel TW-S-TW-S-TW-S-TW-S-TW-S-

D12-D12-D12-D12-D12-

4,8x4,8x4,8x4,8x4,8x

2530384460

Bit: T20W

�� Stainless steel TW-S- D16- 4,8x 38

Bit: T20W

�� Stainless steel A4 TW-A4- D12- 4,8x 38

Bit: T20W


34

1

1. 08/2011

Rainscreen cladding

EPDM

Thermal separation of structural components

Sealing joint

EPDM

Product advantages

extremely resistant to weathering and heat

highly elastic dimensionally stable, even at high temperatures

optional self-adhesive on one side to facilitate application


Application

The dimensionally stable sealing tape is used for curtain walling to facades

Material

Elastomer sheet made of EPDM rubber

Colour

Black

Technical details

Item DIN Characteristics

Class of building material 4102 B2 (normally flammable)

Vapour diffusion resistance –40°C to +130°C

Processing temperature +5°C to +35°C

Shelf life 2 years

Storage temperature +5°C to +25°C

Order information

Order codeEPDM- 60/ 0,7

Type tape width tape thickness box capacity m/roll

EPDM- 60/ 0,7 25 25EPDM-EPDM-EPDM-

100/Adhesive-60/Adhesive-100/

0,70,70,7

252525

252525


35

1

1.08/2011

Rainscreen cladding

SX

Stainless steel self drilling fasteners

Steel substructure

SX


Application

Stainless steel fastening of steel or facade panels to steel or aluminium structure in one operation: drilling, thread forming and secure fastening.

Material

Fastener

SXAustenitic stainless steel, grade AISI 304 (European Standard 1.4301)

Washer


Drill point and lead thread section

Case hardened, special carbon steel

Coloured fastener


HD headform / drive

Low profile Ø 12 mm irius® Ø 12 mm


DI 650


E420

The E420 setting tool for installing self drilling fasteners with the irius® system.

ZA 1/4‘‘


L

Ø 12

d d

L

Ø 12

Special carbon steelcase hardenend

Special carbon steelcase hardenend


T25W Bit


36

1

1. 08/2011

Rainscreen cladding

SX

Stainless steel self drilling fasteners

Steel substructure

Order information

KLL

dirius®

Ø 12 mmLow profile Ø 12 mm


Coloured fastener

W: Washer material S Stainless Steel

* Select Washer 16 mm for cladding


Order codeSX 3/ 15- L12- S16- 5,5x 32


�� Stainless steel SX 3/ 15- L12- S16- 5,5x 32 15VD max. steel:

3,0 mm


�� Stainless steel SX 3/ 11- D10- 4,8x 24 11VD max. steel:

3,0 mm


Bit: T20W

�� Stainless steel SX 3/ 15- D12- 5,5x 30 15VD max. steel:

3,0 mm


Bit: T20W


37

1

1.08/2011

Rainscreen cladding

GA-AS / GA-BS

Stainless steel self tapping fasteners

Special aesthetical fastening

GA-AS / GA-BS


Application

To fix any kind of cladding panels to timber, steel or aluminium sub-frames. A choice of colours and shapes for fascinating effects Choose from the range of shapes and colours to create special emphasis on internal or external surfaces. Achieve tonal features through the use of anodised aluminium and polished stainless materials. The thread onto which the head element is screwed is coated with spedcaps micro-encapsulated liquid adhesive. The adhe-sive cures within a few hours of installation and the design element is secured against unwinding through dynamic loads. It cannot be removed manually after curing.

Material

Fastener

GA-AS / GA-BSStainless steel, grade AISI 304 (European Standard 1.4301) C = Spedcaps coating GAZ: design elements A = Aluminium anodised S = Stainless steel grade 316, 1.4404

Washer


HD headform / drive

Hexagon: 3/8"~ 9,5 mm A/F Special socket required E395


38

1

1. 08/2011

Rainscreen cladding

GA-AS / GA-BS

Stainless steel self tapping fasteners

Special aesthetical fastening

Order information

KLL

d Hexagon: 3/8"~ 9,5 mm A/F


Order codeGA-AS- S16- 6,5x 45

Application Product Type W* d L KL Application range

�� Stainless steel GA-AS- S16- 6,5x 45-C

Hexagon: 3/8"~ 9,5 mm A/FThreaded part: M8 x 11 mm

Recommended pilot hole diameter: t in mm: pilot hole in mm: 1,0 – 1,25 4,50 1,5 – 3,00 5,00 wood 4,80

�� Stainless steel GA-BS- S16- 6,3x 32-C

Hexagon: 3/8"~ 9,5 mm A/FThreaded part: M8 x 11 mm

Recommended pilot hole diameter: t in mm: pilot hole in mm: 1,5 – 4,0 5,30 4,1 – 6,0 5,50 6,0 – 10,0 5,70 > 10,0 5,80

GAZ-801- GAZ-803-* GAZ-804- GAZ-806- GAZ-807- GAZ-811-

Ø 22 x 32 mm

Available in the following colors: Aluminium: red, blue, green, black, gold, silver* on special request Stainless steel: mill finish

Ø 42 x 28 mm Ø 22 x 32 mm Ø 32 x 38 mm Ø 32 x 32 mm Ø 22 x 32 mm


39

1

1.08/2011

Rainscreen cladding

SCFW-S



SCFW-S


Application

Self drilling fastener for non metallic high performance cladding panel to timber batten.

Material

Fastener

SCFW-SAustenitic stainless steel, grade AISI 304 (European Standard 1.4301)

Washer


Coloured fastener


HD headform / drive



DI 650


ZA 1/4‘‘


T20W Bit



40

1

1. 08/2011

Rainscreen cladding

SCFW-S



Order information

KLL



Order codeSCFW-S- D10K- A12- 5,0x 40

Application Product Type HD W* d L KL Application range

�� Stainless steel SCFW-S- D10K- A12- 5,0x 40 8

Bit: T20W

Wings diameter: 6,2 mm


41

1

1.08/2011

Rainscreen cladding

SDF2-S

Austenitic stainless steel fastener

Non metallic high performance cladding to steel framework

SDF2-S


Application

Self drilling fastener for non metallic high performance cladding panel to thin steel framework.

Material

Fastener

SDF2-SAustenitic stainless steel, grade AISI 304 (European Standard 1.4301) with powder coated colour finish.

Coloured fastener


HD headform / drive



DI 650



42

1

1. 08/2011

Rainscreen cladding

SDF2-S

Austenitic stainless steel fastener

Non metallic high performance cladding to steel framework

Order information

KLL



Order codeSDF2-S- D10- 4,5x 24

Application Product Type HD d L KL Application range

�� Stainless steel SDF2-S- D10- 4,5x 24 6 - 14VD max. steel:

1,25 mm


�� at any point �� -Thread forming after penetration of the subframe��

Bit: T20W


43

1

1.08/2011

Rainscreen cladding

TU-S

Blind fasteners

Blind fastening of HPL-cladding panels

TU-S


Application

The TU-S blind fastener is superior to previous approaches to the attachment of HPL cladding panels with regards installation and long-term security.

Material

Fastener

TU-SBody: Stainless steel, grade AISI 316 (European Standard 1.4401) Mandrel: Carbon steel (removed completely)


PowerBird®

Standard blind rivets: Alu 4,8 - 8 mm, Steel: 4,8 - 6,4 mm. Bulb-tite® rivets 4 - 7,7 mm.

TU-S-6,0 x L

Drill bit with depth locator

Drill bit: 6,0x80 for TU-S-6,0xL


44

1

1. 08/2011

Rainscreen cladding

TU-S

Blind fasteners

Blind fastening of HPL-cladding panels

Order information

L

d

d1 D

h

Hexagon 8 mm A/F


Order code

TU-S- 6,0x 9

Application Product Approval Type d L KL Application range

�� Stainless steel A4 TU-S-TU-S-TU-S-

6,0x6,0x6,0x

91113

0.5 - 3.5

0.5 - 5.5

2.5 - 7.5

HSS pilot hole, 6 mm dia. with depth stopAnchorage depth min. 6,5 mm For HPL panels between 8,0 - 13,0 mm thickness

Set the TU-S with a PowerBird® and nose piece 17/36


45

1

1.08/2011

Rainscreen cladding

PFS-K-Aluminium

Profiles

Aluminium framework

PFS-K-Aluminium


Application

Assures a perfect finish of the corners.

Material

Profile

PFS-K-AluminiumAluminium: crude, hot varnished on the basis of the colour of the panels

Coloured fastener

Coloured Profile available

Order Code

PFS-K-A- 10/10

Application Product Type axb KL Application range

PFS-K-A-PFS-K-A-PFS-K-A-PFS-K-A-

10/1018/1829/2940/40

� 10

� 18

� 29

� 40

�� !� ��#��$��%��&��!�� #�'�$��

�� Aluminium


46

1

Rainscreen cladding

PFS-Q-Aluminium

Profiles

Aluminium framework

PFS-Q-Aluminium


Application


Materiale

Profile


Coloured fastener


Order Code

PFS-Q-A- 10/10


PFS-Q-A-PFS-Q-A-

10/1018/18

� 10

� 18 �� !� ��#��$��%��&��!�� #�'�$��

�� Aluminium

08/20111.


47

1

1.08/2011

Rainscreen cladding

PFR-Aluminium

Profiles

Aluminium framework

PFR-Aluminium


Application


Material

Profile

PFR-AluminiumAluminium: crude, hot varnished on the basis of the colour of the panels

Coloured fastener


Order Code

PFR-A- 10/10


PFR-A-PFR-A-PFR-A-

10/1015/1518/18

� 10

� 15

� 18�� !� ��#��$��%��&��!�� #�'�$��

�� Aluminium


48

1

Rainscreen cladding

PF-Z-Aluminium

Profiles

Aluminium framework

PF-Z-Aluminium


Application


Materiale

Profile


Coloured fastener


Order Code

PF-Z-A- 40/8/10


PF-Z-A-PF-Z-A-

40/8/1040/10/10

� 8

� 10 �� !!� ��#��$��%��&��!�� #�'�$��

�� Aluminium

08/20111.


49

1

1.08/2011

Rainscreen cladding

PV-Aluminium

Profiles

Aluminium framework

PV-A- 30x30

Application Product Type hxl KL Application range

PV-A-PV-A-PV-A-PV-A-PV-A-PV-A

PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-

30x3030x4030x5030x6030x7030x90

40x10040x12040x14040x16040x18040x20040x22040x24040x26040x28040x300

�� !� ��#��(��%��&��!�� #�'�$��

�� Aluminium

PV-Aluminium


Application

Assures air ventilation of the facade and guard against rodent.

Material

Profile

PV-AluminiumAluminium: crude

Coloured fastener


Order Code

L

l

h

e


108/2011

2

ALW-S1

ALW-S2

ALW-D

ALW-L1

ALW-L2

2

2.

Clamping System ALW Clamping System ALW

Facade system ALW

2 08/2011

2

2.

Clamping System ALW

ALW-S1

Clamping System ALW

ALW-S1

Simple, tried and trusted and timesaving.The ALW-S clamping system has already been used in amyriad of projects, both at home and abroad. The glass used can be anything from 8 to 18 mm thick, depending on the application. No glass drilling is required for completelysecure installation. We can even provide complete staticcalculations based on standard BS 6399, mandatorysince January 1. 2007. All components also conform to building regulations through adherence to BS 8118. Installing the clamps and fitting glass panels on site is made much easier by the fact that tolerances in the support structure can be taken up by adjustments in every direction: simple and time-saving.

SFS code: ALW-S1-O-RAL9006 ALW-S1-O-EV1Description: Single upper clamp for fixing one

pane, aluminium and EPDM insertsGlass thickness: 8 - 18 mmMax glass size: 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised

aluminium EV1**

SFS code: ALW-S1-M-RAL9006 ALW-S1-M-EV1Description: Single central clamp for fixing two

panes, aluminium and EPDM insertsGlass thickness: 8 - 18 mmMax glass size: 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised

aluminium EV1**

SFS code: ALW-S1-U-RAL9006 ALW-S1-U-EV1Description: Single lower clamp for fixing one

pane, aluminium and EPDM insertsGlass thickness: 8 - 18 mmMax glass size: 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised

aluminium EV1**

15,00 40,00 15,00

70,00

70,00

5242

15,00 40,00 15,00

70,00

142

80

52

149

80

57

149

80

57

* The values indicated are for guidance only.** The clamping system is available in RAL colours or anodised. This choice makes a project-co-ordinated colour match possible.

upper

central

lower

308/2011

2

2.

Clamping System ALW

ALW-S2

Clamping System ALW

149

80

57

142

80

52

149

80

57

ALW-S2

Simple, tried and trusted and timesaving.The ALW-S clamping system has already been used in amyriad of projects, both at home and abroad. The glass used can be anything from 8 to 18 mm thick, depending on the application. No glass drilling is required for completelysecure installation. We can even provide complete staticcalculations based on standard BS 6399, mandatorysince January 1. 2007. All components also conform to building regulations through adherence to BS 8118. Installing the clamps and fitting glass panels on site is made much easier by the fact that tolerances in the support structure can be taken up by adjustments in every direction: simple and time-saving.

SFS code: ALW-S2-O-RAL9006 ALW-S2-O-EV1Description: Twin upper clamp for fixing two

adjacent panes, aluminium andEPDM inserts

Glass thickness: 8 - 18 mmMax glass size: 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised

aluminium EV1**

SFS code: ALW-S2-M-RAL9006 ALW-S2-M-EV1Description: Twin central clamp for fixing four



aluminium EV1**

SFS code: ALW-S2-U-RAL9006 ALW-S2-U-EV1Description: Twin lower clamp for fixing two



aluminium EV1**

40,0015,00 15,00

140,00

70,00

4253

40,0015,00 15,00

140,00


upper

central

lower

4 08/2011

2

2.

Clamping System ALW

ALW-D

Clamping System ALW

ALW-D (double clamping)

At last: double-overlapped glass panels.The further advanced ALW-D system offers applicationpotential for double-clamped installations. All the existingfeatures and benefits of the tried and trusted ALW-Sclamping system are enhanced by this additionaladvantage. The panes are not just horizontally but alsovertically overlapped. The absence of vertical joins createsa very attractive façade finish. Overlapping of the panes canbe either parallel or with a lateral displacement.

SFS code Description

ALW-D-M-U ALW - double lowerALW-D-R-O ALW - double-right upperALW-D-R-M ALW - double-right central

upper

167

80

52

6

central

176

80

57

6

right

central

left

70

40

70

Description: ALW - double, aluminium andEPDM inserts

Glass thickness: 8 - 18 mmMax glass size: max. 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised

aluminium EV1**


176

80

57

6

lower

508/2011

2

2.

Clamping System ALW

ALW-D

Clamping System ALW


ALW-D-R-Oupper retainer,

short

ALW-D-L-Oupper retainer,

long

ALW-D-R-Oupper retainer,

short

ALW-D-L-Oupper retainer,

long

ALW-D-L-Mcentral retainer,

long

ALW-D-M-M ALW-D-R-Mcentral retainer,

short

ALW-D-L-Ulower retainer,

long

ALW-D-M-U ALW-D-R-Ulower retainer,

short

connected by a 6mm plate

Example: facade right sloping (front view)

ALW-D-M-Oconsisting of:

* A

sta

tic c

alcu

latio

n m

ust

be u

nder

take

n fo

r ev

ery

appl

icat

ion

6 08/2011

2

2.

Clamping System ALW

ALW-D

Clamping System ALW


Example: View lower retainer

left sloping

right sloping

parallel

View from above

7070

10

10

40

240

6

70

7038

70

70 38

ALW-D-M-Uconsisting of:

ALW-D-R-Ulower retainer,

short

ALW-D-R-Ulower retainer,

short


long


long

connected by a 6 mm plate

20

708/2011

2

Single and double retainers for fitting two or four glass panels; aluminium anodised EV1 or powder coated RAL 9006; with EPDM seal

ESG6, ESG6 enamelledESG8, ESG8 enamelled

0,4 - 2,9 kN/m2*

1200 mm x 1000 mm2400 x 500 mm

ALW-Light is ideal for installing light-weight glass panels onto aluminium sub-frames. It is characterised by ease–of-use and easy adaptation to any pane size. Fixing to the sub-frame is achieved with corrosion-proof power tool fasteners. Each glass panel is held in place by the positioning of the neighbouring pane, secured by shims. The glass is secured in place without drilling. Clamps are available in anodised aluminium EV1 or any RAL colour.

ALW-Light has a full static type approval to DIN 18516.

There is no need for individual building regulations approval.

ALW-L1-Oupper single clamp

ALW-L1-Mmid single clap

ALW-L1-Ulower single clamp

ALW-L2-OUpper double clamp

ALW-L2-Mmid couble clamp

ALW-L2-Ulower double clamp

1

2

3

4

5

6

1

2

3

4

5

6

1

2

3

-5

-5

+5

+5

Front view

Adjustments

View from above

55

83

49

100


50 50

SFS code:

Discription:

Glass thickness:

Wind strength:

Max. glass surface:

ALW-L1 // ALW-L2

2.

Clamping System ALW

ALW-L1 / ALW-L2

Clamping System ALW

8 08/2011

2

2.

908/2011

2

Canopy System VDS

Canopy Systems VDS VDS kit Large

VDS kit Medium

VDS kit Small

Single components

2.

10 08/2011

2

2.

Canopy System VDS

VDS

Canopy System VDS

Assembly instructions:

Fixing positions should be detailed accurately using suitable measuring tools.

Please note that building regulations may well apply. The customer is responsible for all building approvals. A structural engineer should be consulted to agree all loadings and substructure fixing types.Quoted prices do not include calculating loadings and fixing types. Fasteners to the substructure should be fixed in accordance with the manufacturer‘s recommendations and technical values

Assembly and loadings:

All masonry anchors i.e. chemical and expansion anchors should be installed in accordance with the manufacturer‘s instructions dependant upon the substrate.

Plates should be attached using the appropriate fastener.

The threaded connecting rod is positioned onto the upper fastening plate and is secured with a stainless steel pin. A safety retaining ring is then fixed in place.

Glass point fixing: place the male threaded portion through the bore hole in the glass and screw on, from beneath, the female part of the point fixing. Please note that the orientation is correct to align with the coupling on the lower end of the connecting rod. The thread pin must be secured with thread-locking adhesive. Then fit the glass pane into the lower wall bracket and secure it with bolts and retaining rings.

Insert the connecting rod into the front point fitting and secure it by slotting the split pin into the bolt.

The canopy is then adjusted by turning the connectingrod. The nuts must be locked and secured with thread-locking adhesive.

should be provided by the supplier. All flat washers used between the glass plates and fittings are UV resistant. All parts should be professionally assembled and adjusted. The canopy can be adjusted up to +/- 20 mm by way of the connecting rods. Once adjusted the connected rods should be locked to avoid misalignment. The canopies are not accessible for cleaning purposes.

1108/2011

2

2.

Canopy System VDS

VDS

Canopy System VDS

1659

mm

(46)

1564

mm

(42)

1458

mm

(39)

1337

mm

(34)

1304

mm

(46)

1205

mm

(41)

1092

mm

(36)

1400 mm1500 mm1600 mm 1700 mm1800 mm1900 mm2000 mm

connecting rodmiddle eye to eye

Z5: 2100 mm


Z4: 1615mm

95°

For standard sizes, static calculations are available.

SFS code: VDS-80-LargeDescription: Set canopy system LargeContaining: 2x upper wall bracket (VDS-WO)

2x connection rod (Z4/Z5)4x point fitting Ø 80 mm (VDS-80-ALP80)2x lower wall bracket (VDS-WU)

Glass thickness: Laminated safety glass,2 x 10 mm heat strengthened

Angle of the glass:

max. 10°

Angle of the rods:

30° - 46°

Bore holes: 30 mm

VDS-80-Large

2000

1900

1800

1700

1600

1500

1400 350

350

2000

7272

7272

7272

72

7272

7272

7272

72

30

* A

sta

tic c

alcu

latio

n m

ust

be u

nder

take

n fo

r ev

ery

appl

icat

ion

12 08/2011

2

2.

Canopy System VDS

VDS

Canopy System VDS

For standard sizes, static calculations are available.

SFS code: VDS-60-MediumDescription: Set canopy system MediumContaining: 2x upper wall bracket (VDS-WO)

2x connection rod (Z3)4x point fitting Ø 60 mm (VDS-60-ALP60)2x lower wall bracket (VDS-WU)


Slope of the roof:

max. 10°

Slope of the rods:

30° - 46°

Bore holes: 26 mm

VDS-60-Medium

905

mm

(41°

)

770

mm

(30°

)


Z3: 1250mm

1300

1200

300

300

1800

72

72

72

72

26

95°

1200 mm

1300 mm

* A

sta

tic c

alcu

latio

n m

ust

be u

nder

take

n fo

r ev

ery

appl

icat

ion

1308/2011

2

2.

Canopy System VDS

VDS

Canopy System VDS

SFS code: VDS-45-SmallDescription: Set canopy system SmallContaining: 2x upper wall bracket (VDS-WO)

2x connection rod (Z1/Z2)4x point fitting Ø 45 mm (VDS-45-ALP45)2x lower wall bracket (VDS-WU)


Slope of the roof:

max. 10°

Slope of the rods:

30° - 46°

Bore holes: 22 mm

VDS-45-Small

900

800

300

200

1600

72 72

22

1100

1000

300

250

1600

72 72

22

72 72

680

mm

(41°

)

550

mm

(30°

)


Z2: 1000mm

95°

800 mm900 mm


Z1: 820mm

1000 mm1100 mm

770

mm

(39°

)

640

mm

(30°

)

* A

sta

tic c

alcu

latio

n m

ust

be u

nder

take

n fo

r ev

ery

appl

icat

ion

14 08/2011

2

2.

Canopy System VDS

VDS

Canopy System VDS

Single components

SFS code: VDS-WODescription: upper standard wall bracket

suitable for all 3 canopy sets

Single components

SFS code: VDS-45/60/80 (Z1; Z2; Z3; Z4; Z5)Description: connecting rod with yoke

Please quote requested length Z1 - Z5 or special length

Single components

SFS code: VDS-80-ALP80Description: point fixing Ø 80 mm with connector

for canopy set LARGE

Single components


for canopy set MEDIUM

Single components


for canopy set SMALL

Single components

SFS code: VDS-WUDescription: lower standard wall bracket


Ø11

50

110

80

10

Ø

35

70

39

M12

38

26

82

102

Ø80

36

24

Ø60

82

2

10

M10

Ø22

Ø16

/20

Ø11

110

50

80

10 24

36

10

2

2

6

24

Ø45

M10

* A

sta

tic c

alcu

latio

n m

ust

be u

nder

take

n fo

r ev

ery

appl

icat

ion

1508/2011

2

2.

Canopy System VDS

VDS

Canopy System VDS*

A s

tatic

cal

cula

tion

mus

t be

und

erta

ken

for

ever

y ap

plic

atio

n

Variants of wall bracket




150

120

15

15Ø13

10

Ø35

70

39

10

150

150

120

15

15Ø13

Ø150

120

15

Ø1310

Ø35

70

39

Ø150

120

15

Ø13 10

150

SFS code: VDS-WO RundDescription: upper wall bracket, round design


SFS code: VDS-WU RundDescription: lower wall bracket, round design


SFS code: VDS-WO QuadratDescription: upper wall bracket, square design


SFS code: VDS-WU QuadratDescription: lower wall bracket, square design


1

3

9

3.08/2011

Tools and accessories Tools and accessories

3Application Product code Page

Self drilling

self tapping fastenersDI 650 � 3.2

Concrete drilling DB 620 � 3.3

For rivets

Lazy tongs

RM-25 � 3.4

Lever tool

RM-20 � 3.4

AccuBird® � 3.5

PowerBird® � 3.5

2

3

3. 08/2011


DI 650

Setting tool and accessories

Self drilling and self tapping fasteners

DI 650

Application

Lightweight power screwgun for installing self drilling and self tapping fasteners.

Technical details

Power Tool: DI 650Wattage: 650 WMax. revs: 2000 rpmPower Supply: 110V / 230VMax. torque: 20 NmOverall length: 290 mmWeight: 1,6 kg


3

3

3.08/2011


DB 620

Hammer drilling machine

Concrete drilling

DB 620

Application

Hammer drilling machine for pre-drilling concrete and masonryTechnical details

Wattage: 620 WMax. revs: 870 rpmPower Supply: 110V / 230VWeight: 2,4 kgDrive connection: SDS-Plus

4

3

3. 08/2011

Tools and accessoriesRivet tool

For rivets

Lazy tongs RM-25 / Lever tool RM-20

Lazy tongs RM-25

Application


Lever tool RM-20

Application


5

3

3.08/2011


AccuBird® / PowerBird®

For standard blind rivets and for Bulb-tite® rivets

For rivets

AccuBird®

Application

For standard blind rivets 2,0 - 5,0 mm.For Bulb-tite® rivets 4,0 - 6,3 mm.

Technical details

Weight: 2,2 KgPulling distance: 20 mmBattery: 14,4 Volt, Li-Ion 1,3 AhCharging: 60 min.Pulling strenght: 8500 NFor Rivet diameter: 2,0 - 5,0 mm

PowerBird®

Application

Standard blind rivets: Alu 4,8 - 8,0 mm, Steel: 4,8 - 6,4 mm. Bulb-tite® rivets 4,0 - 7,7 mm.

Technical details

Weight: 2,2 KgPulling distance: 20 mmBattery: 14,4 Volt, Li-Ion 2,6 AhCharging: 60 min.Pulling strenght: 13000 NFor Rivet diameter: 4,8 - 6,4 mm

4.A

4

Business Solutions by SFS intec:

Individual solutions tailored to your needs.

Business Solutions Roofing and Cladding

We live in a complex, constantly changing business environment which presents us with numerous challenges in our day-to-day work. Simple, lean processes, enhancing efficiency and – not least – cost and time savings are important themes.

SFS intec is a committed partner, adopting a holistic approach and not merely supplying products. Our efforts are directed towards successfully addressing the challenges arising in day-to-day business with tailor-made supplementary services.

Our thoughtfully devised portfolio of solutions is adapted to the differing requirements of market participants. Whether for small and medium-sized businesses, industrial customers, dealers or system manufacturers: Business Solutions by SFS intec cater to a wide diversity of needs. Further-more, they are designed in such a way that they can be adapted individually to your specific requirements.

Take as well advantage of the benefits of our Business Solutions

and be further informed in a personal meeting.

Business Solutions by SFS intec offer you the following benefits:

��Information transparency��Controlled supply chain processes��Many years of experience in supply chain management

��Rapid, efficient ordering��Optimised inventory��Construction site services

��Faster order input and processing��Outsourcing of process steps��Electronic data interchange

��Simple ordering process��Information in real time��Reduction in process steps

Easy

Time-saving

Cost-saving

Secure

08/2011

4

Electronic ordering:

Fast, simple, faultless.

eFormat

Accelerate and secure the order process!

Conversion of orders into electronic messages.

��Orders take priority

��Faster order processing

��No transmission errors

eShop

Order quickly and easily online!

Website for online orders round the clock.

��Order quickly and easily

��Irrespective of time and place

��Important information at a glance (e.g. product range, previous orders, invoices)

eScan

Simplify your stock management!

Electronic ordering using a barcode scanner.

��Optimal inventory organisation and efficient ordering, including analysis and consultancy by SFS intec

��Lower procurement costs

��Fast, efficient ordering

EDI

Stay connected constantly!

Electronic data interchange between the customer’s ERP system and SFS intec‘s.

��Continuous link

��Fast, simple process

��No transmission errors

4.B 08/2011


4

Electronic information:

Always up-to-date.

ePost

Receive your documents immediately!

Electronic mailing of order acknowledgment, delivery note and invoice.

��Real-time information

��Information transmitted directly to the person responsible

��Paperless filing possible

ePortal

Information at your fingertips!

Orders and all related documents accessible at all times, including real-time delivery status and delivery confirmation.

��Full transparency

��Information available at any time and place

��Accessibility for several defined users

4.C08/2011


4

Our construction site service:

Higher on-site efficiency.

SMS Service

Delivering confidence!

Notification and confirmation of deliveries to the construc-tion site via SMS.

��High degree of transparency regarding deliveries

��No more missed deliveries

��Less time-wasting, no standstills on the construction site

Job2Job

Save costs, improve efficiency!

You order per job, we do the rest: storage, order picking, packaging, labelling, forwarding.

��Major cost savings in procurement

��Reduced inventories

��Greater convenience

Business Solutions by SFS intec:

We’d be glad to give you more information!

Are you interested in knowing more about Business Solutions by SFS intec?

Don’t hesitate to contact your customer relationship ma-nager. He’ll be pleased to organise a visit to you together with one of our Business Solutions experts!

4.D 08/2011


4

4.108/2011

Dependably well served:

Meeting your business needs - tailored solutions from SFS intec.

Services Roofing and Cladding

Partners who really

understand you:

Experts for architectural

exteriors.

The secure route to the right

fastener solution:

Simple, efficient planning aids

at every step of the project.

Always one step ahead:

An international network

with local knowledge in

every field.

Economy and security

built in:

Complete systems for every

application.

Quality you can depend on:

A network of quality-certified

plants.

Reliable performance:

Tested in-house, confirmed

on site.

The right fastening system

every time:

Technical advice and support

any time, anywhere.

High standard of delivery reli-

ability due to local presence:

Global supply chain

management.

4

Structural timber and glulam beams

Hinge systems fordoors and windows

Ventilated curtain walling

Fastening systems for doors and windows

Fastening cassettesystems

Fastening composite panels

Post-and-rail joints

Glass attachment

Fastening flat roofs

Perimeter zones

1 2 3 4

5 6 7 8

9 10

1

3

4

56

78

9

210

Comprehensive application

knowledge from one Partner

For every aspect of architectural exte-riors - from fixings to special hinges for doors and windows – SFS intec understands your business. We help make our global customer base more competitive.

Experienced sector specialists tuned to the regional requirements of each individual market guarantee genuinelocal advice and support.

Partners who really understand you:

Experts for architectural exteriors.

Why not take advantage of our

expertise:

� More than 50 years experience��Technical application profession- als available for on-site support��Know-how database from research, development, manufacturing and application engineering

4.2 08/2011


4

The secure route to the right fastener solution:

Simple, efficient planning aids at every step of the project.

Talking to the specialists in fastener

and fixing technology

Whatever phase your project is at, SFS intec offers you the right planning aids to determine the appropriate fastener and the matching accessories.

That might be a specific application notmentioned in our catalogue. Whether it‘s a new build or renovation, our experts are here to offer fast, efficient help in choosing the right system for you; with no complications. Solutions are always matched to the specificrequirements of the individual project,providing you with longevity, functionali-ty, long-term security and real aesthetic appeal.

Choose the planning aids you

need:

� User-friendly catalogues��On-site or office advice��Application technicians available by phone��Product selector and project management aids at www.sfsintec.biz

��Twenty-four hour online e-shop ordering

4.308/2011


4

Tried and trusted technologies mat-

ched to your specific requirements

Somewhere in the world we will have already addressed the same tasks confronting you right now.

Our global team of experts is conti-nuously working on new challenges which means our customers benefit from a massive pool of accumulated knowledge. So they are always one step ahead.

With your specific requirements in our hands, we exchange know-how among a vast international network of industry specialists, seeking out the right fastener solutions for you. Solutions to make your work easier and to help your business be more competitive.

The services that can improve

your competitive edge:

��Local site support on projects outside your home market� Years of experience on numerous international projects��In-depth knowledge gained from our work with the world’s leading OEM’s��People on site who speak your language, offering an international approach

Always one step ahead:

An international network with local knowledge in every field.

4.4 08/2011


4

Services Flat Roof

Economy and security built in:

Complete systems covering every application.

More than just fastener systems

We work hand-in-hand with planners and specifiers everyday on sites around the world. This is the driver behind our constantly evolving products and ser-vices. The diverse messages coming in from the market place are converted by our design and development specia-lists into profitable solutions for our customers.

SFS intec offers more than just fasteners to its customers. We provide intelligent drive systems and coatings that optimise the insertion torque. Design details that ensure every solu-tion is perfectly fit for purpose. We also offer those essential complementary products like rivets, pipe flashings, sealing tapes and anchorages – all fulfilling the most demanding require-ments.

SFS intec complete systems:

��Multi-functional fasteners ��Guaranteed long-life ��Simple and easy to use ��Intelligent installation tools enabling fast, efficient work��System accessories including rivets, pipe flashings, sealing tapes and anchorages

4.508/2011


4

Assured quality – fast delivery

We never compromise when it comes to our application-optimised fasteners. Our trained specialists throughout the value-added chain are there to ensure quality in every aspect of our products and services.

Every SFS intec site has its own accreditation to ISO 9001 quality management standard. Moreover, a complete network of manufacturing and logistics support centres means maximum product availability.

SFS intec business partners

profit from:

��Certified quality from our own production plants��Fast, efficient product availability from an international manufacturing and logistics network��Flexible responses to individual needs that only the original manufacturer can truly provide

Quality you can depend on:

A network of quality-certified plants.

4.6 08/2011


4

Services Flat Roof

Reliable performance:

Tested in-house, confirmed on site.

Future-focused fastener systems

Are the fasteners up to the anticipatedstatic and dynamic loads? Is the fastener seal secure for life? Will wind forces be safely transmitted to the sub-structure? Such questions con-front SFS intec experts day by day.

New solutions are extensively tested in our own in-house laboratories to see how they will perform in practice. One key aspect lies in meeting the require-ments of a diverse range of approvalauthorities. Working hand-in-glove with leading manufacturers of roofing systems, structural components and insulation systems, whilst carrying out our own primary research, we at SFS intec have spearheaded numer-ous trends in modern fastener deve-lopment.

SFS intec fastening systems are

checked for:

��Long-term behaviour under static and dynamic loading��Corrosion resistance��Ease-of-use and perfect functioning on site��Fulfilment of approval authority requirements��Continuous production controls

4.708/2011


4

Absolute fastener security

Increased safety requirements; econo-mic, ergonomic and aesthetic conside-rations; meeting the relevant direc-tives and building control guidelines: these and other factors are becoming increasingly important in industrial construction.

That’s why choosing the right fastening system for each specific application is vital. We ensure specifiers, architects and installers have the advice and information needed to choose an appropriate system from the wide range of alternatives available.

Your support team is only a phone call away. Our comprehensive website www.sfsintec.biz provides a wealth of information on optimum fastener technology. Draw on our years of experience in every aspect of faste-ning and fixing to put you in the driving seat when it comes to industrial building.

Services ensuring a secure build:

��Choosing the appropriate fastening system at the planning stage��Comprehensive analysis of your needs including on-site tests��Optimum supply chain management from plant to site��On-site personnel training

The right fastening system every time:

Technical advice and support anytime, anywhere.

4.8 08/2011


4

Business Solutions Flat Roof

Fast, reliable service wherever you

need it

The efficient and timely handling of construction projects is becoming increasingly important as assignments grow in complexity. Efficient supply chain management is therefore gaining in significance.

SFS intec has demonstrated its capabilities in this field in numerous trailblazing projects. Our international presence guarantees the high availabi-lity of market-specific products as well as rapid, reliable service worldwide. You also benefit from simple, efficient ordering, management and delivery processes through tailor-made Busi-ness Solutions in the field of supply chain management. You will find more information about this on pages 13.A to 13.D.

We improve your value chain

with:

��An international presence��High availability of market-specific products��Global delivery��Speed and reliability��Individually tailored Business Solutions

High standard of delivery reliability due to local presence:

Global supply chain management.

4.908/2011


4

Focused market activities for a wide range of industries:

Generating customer benefits as a joint corporate objective.

4.10 08/2011


Development and production partner for precision engineered components and special fasteners for suppliers to the automotive industry operating worldwide.

Development and manufacturing partner for special fasteners and precision engineered components for a range of industrial business sectors.

Mechanical fastening systems and fixing technologies with system accessories for light industrial builds, bolt-on rear ventilated facades, flat roofing and timber engineering..

Mechanical fastening systems for doors and windows; as well as system solutions for glass facades.

FasteningSystems

Hinge technology for doors and windows.

AutomotiveProducts

IndustrialProducts

Attachment

5.1

5

5

08/2011

www.sfsintec.biz

Facade catalogue Innovative fastening systems and ... · Facade catalogue Innovative fastening...

Documents

Transcript of Facade catalogue Innovative fastening systems and ... · Facade catalogue Innovative fastening...