Fabricated Strainers

of 38 /38
Fabricated Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IFC Series TB, TC and TP Temporary Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 IFC Series Y125 and Y150 Fabricated Y-Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 IFC Series T150, T300 and T600 Tee Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Dimensional Data IFC Series T150 Tee Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Dimensional Data IFC Series T300 Tee Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Dimensional Data IFC Series T600 Tee Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 IFC Series B150, B300 and B600 Fabricated Basket Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Dimensional Data IFC Series B150 Fabricated Basket Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Dimensional Data IFC Series B300 Fabricated Basket Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Dimensional Data IFC Series B600 Fabricated Basket Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 IFC Series DB125 Duplex Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 IFC Series DB150 Duplex Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Dimensional Data IFC Series DB150 - Style 1 Duplex Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Dimensional Data IFC Series DB150 - Style 2 Duplex Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Dimensional Data IFC Series DB150 - Style 3 Duplex Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Quick Opening Covers and Cover Removal Aids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Replacement Baskets and Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Engineering Data Screen Openings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Temporary Strainer Pressure Drop - Liquids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Fabricated Y and Tee Strainer Pressure Drop - Liquids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Fabricated Basket and Duplex Strainer Pressure Drop - Liquids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Screen Correction Factor Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Viscosity and Density Correction Factor Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Correction Factors for Clogged Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Temporary Strainer Burst Pressure - Series TB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Temporary Strainer Burst Pressure - Series TC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Y Strainer Screen Burst Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Tee Strainer Screen Burst Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Basket and Duplex Strainer Basket Burst Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Effective Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Checklist and Suggested Specifications for IFC Fabricated Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Installation and Maintenance Instructions for IFC Fabricated Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 How To Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Table Of Contents Notes: The material in this catalogue is for general information. For specific performance data and proper material selection, consult your IFC representative. Although every attempt has been made to ensure that the information contained in this catalogue is correct IFC Inc. reserves the right to change designs, materials and/or specifications without notice. Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Embed Size (px)

Transcript of Fabricated Strainers

Table Of ContentsFabricated Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IFC Series TB, TC and TP Temporary Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 IFC Series Y125 and Y150 Fabricated Y-Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 IFC Series T150, T300 and T600 Tee Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Dimensional Data IFC Series T150 Tee Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Dimensional Data IFC Series T300 Tee Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Dimensional Data IFC Series T600 Tee Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 IFC Series B150, B300 and B600 Fabricated Basket Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Dimensional Data IFC Series B150 Fabricated Basket Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Dimensional Data IFC Series B300 Fabricated Basket Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Dimensional Data IFC Series B600 Fabricated Basket Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 IFC Series DB125 Duplex Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 IFC Series DB150 Duplex Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Dimensional Data IFC Series DB150 - Style 1 Duplex Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Dimensional Data IFC Series DB150 - Style 2 Duplex Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Dimensional Data IFC Series DB150 - Style 3 Duplex Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Quick Opening Covers and Cover Removal Aids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Replacement Baskets and Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Engineering Data Screen Openings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Temporary Strainer Pressure Drop - Liquids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Fabricated Y and Tee Strainer Pressure Drop - Liquids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Fabricated Basket and Duplex Strainer Pressure Drop - Liquids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Screen Correction Factor Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Viscosity and Density Correction Factor Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Correction Factors for Clogged Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Temporary Strainer Burst Pressure - Series TB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Temporary Strainer Burst Pressure - Series TC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Y Strainer Screen Burst Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Tee Strainer Screen Burst Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Basket and Duplex Strainer Basket Burst Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Effective Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Checklist and Suggested Specifications for IFC Fabricated Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Installation and Maintenance Instructions for IFC Fabricated Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 How To Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Notes: The material in this catalogue is for general information. For specific performance data and proper material selection, consult your IFC representative. Although every attempt has been made to ensure that the information contained in this catalogue is correct IFC Inc. reserves the right to change designs, materials and/or specifications without notice.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Fabricated Strainers

Available Materials of Construction:

Size range: 1/4 (8mm) and larger

Carbon Steel Low Temp Carbon Steel Stainless Steel Chrome Molly Monel Alloy 20 Hastelloy Titanium

End Connections:

Applications:

Flat Faced Raised Face RTJ Flanged Butt-weld Grooved Threaded (NPT) Socket Weld

Process Industry Power Industry Chemical Industry Oil and Gas Pulp and Paper Metals and Mining Water and Waste

Products:

Standard line of Temporary, Tee, Y, Basket and Duplex strainers. Custom strainers to meet individual space or performance requirements. Automated self-cleaning strainers/systems. Screens and baskets.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series TB, TC and TP Temporary StrainersStandard Features Standard sizes from 3/4 - 48. Used primarily for new pipeline start-up or where solid loading is minimal. Filtration as fine as 40 microns available. Available in conical, basket and plate configurations. Available flat faced, raised face or RTJ with or without face serrations. All 304 SS construction is standard. Construction in other materials is available (i.e carbon steel, monel, hastelloy, titanium, etc.). May be installed in horizontal or vertical pipelines with cone pointed upstream or downstream. Strainer size and pressure rating is stamped on handle.

Standard Construction DetailsPERFORATED PLATE MESH INSIDE FLOW INSIDE TO OUT

MESH OUTSIDE FLOW OUTSIDE TO IN

MESH LINED BI-DIRECTIONAL FLOW

Parts List and Standard MaterialsPart Ring Handle Perforated Plate Mesh (1) Carbon Steel A36 A36 A36 A276-304 304 Stainless Steel A240-304 A240-304 A240-304 A276-304 General: 1. Strainers suitable for large differential pressures are available. Please see page 30 for standard ratings. 2. Mesh lined strainers manufactured for unidirectional flow cannot be used for bi-directional flow. Please specify the bi-directional flow requirement when ordering. 3. Please specify if handles are to be stamped with tag numbers when ordering.

(1) When required and when used.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series TB, TC and TP Temporary Strainers

BASKET TYPE (TB)

CONICAL TYPE (TC)Opening 0.125 in. (3.2 mm) 0.125 in. (3.2 mm)

PLATE TYPE (TP)Gauge Thickness 22 16

Standard ScreensSize Range 3/4- 8 (20mm-200mm) 10- 24 (250mm-600mm)

Dimensional DataSize in (mm) 3/4 20 1 25 1-1/2 40 2 50 2-1/2 65 3 80 4 100 5 125 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 A (O.D.) in (mm) 150/300# 600# 900# 2.13 2.50 2.63 54 64 67 2.50 2.75 3.00 64 70 76 3.25 3.63 3.75 83 92 95 4.00 4.25 5.50 102 108 140 4.75 5.00 6.38 121 127 162 5.25 5.75 6.50 133 146 165 6.75 7.50 8.00 171 191 203 7.63 9.38 9.63 194 238 244 8.63 10.37 11.25 219 263 286 10.87 12.50 14.00 276 318 356 13.25 15.63 17.00 337 397 432 16.00 17.87 19.50 406 454 495 17.37 19.00 20.37 441 483 517 20.12 21.87 22.50 511 555 572 21.25 23.75 25.00 540 603 635 23.50 26.62 27.38 597 676 695 27.87 30.87 32.88 708 784 835 OA% = B (I.D.) C in in (mm) (mm) 1500# 2.63 67 3.00 76 3.75 95 5.50 140 6.38 162 6.75 171 8.13 206 9.88 251 11.00 279 13.75 349 17.00 432 20.37 517 22.62 575 25.13 638 27.63 702 29.63 753 35.38 899 0.63 16 0.75 19 1.25 32 1.75 44 2.25 57 2.75 70 3.75 95 4.63 117 5.38 137 7.38 187 9.38 238 11.00 279 12.25 311 14.00 356 15.75 400 17.50 445 21.25 540 0.31 8 0.38 10 0.63 16 0.88 22 1.13 29 1.38 35 1.88 48 2.31 59 2.69 68 3.69 94 4.69 119 5.50 140 6.13 156 7.00 178 7.88 200 8.75 222 10.63 270 100% 0.75 19 1.13 29 1.50 38 2.00 51 2.19 56 2.75 70 3.50 89 4.50 114 5.50 140 7.00 178 8.63 219 10.50 267 11.50 292 14.00 356 16.00 406 17.00 432 21.00 533 D (Basket Length) in (mm) 150% 200% 300% 1.13 1.50 2.25 29 38 57 1.69 2.25 3.38 43 57 86 2.25 3.00 4.50 57 76 114 3.00 4.00 6.00 76 102 152 3.37 4.50 6.75 86 114 171 4.25 5.69 8.50 1.08 145 216 5.32 7.19 11.00 13.5 183 279 6.75 9.13 14.00 171 232 356 8.50 11.37 17.00 216 289 432 10.69 15.00 22.00 272 381 559 14.00 18.00 27.00 356 457 686 17.00 22.00 33.00 432 559 838 18.00 24.00 36.00 457 610 914 21.00 28.00 42.00 533 711 1067 24.00 32.00 47.00 610 813 1194 27.00 35.00 53.00 686 889 1346 32.00 42.00 64.00 813 1067 1626 E (Cone Length) in (mm) 150% 200% 1.69 2.25 43 57 2.50 3.31 64 84 3.38 4.50 86 114 4.50 6.00 114 152 5.00 6.69 127 170 6.25 8.50 159 216 7.88 10.63 200 270 10.13 14.00 257 356 13.00 17.00 330 432 16.00 22.00 406 559 20.00 27.00 508 686 24.00 33.00 610 838 27.00 36.00 686 914 31.00 41.00 787 1041 35.00 47.00 889 1194 39.00 53.00 991 1346 47.00 63.00 1194 1600 F (2) in (mm) 300% 3.38 86 5.00 127 6.75 171 9.13 232 10.13 257 12.75 324 17.00 432 21.00 533 26.00 660 33.00 838 40.00 1016 49.00 1245 54.00 1372 62.00 1575 71.00 1803 79.00 2007 95.00 2413 0.13 3 0.13 3 0.13 3 0.13 3 0.13 3 0.13 3 0.13 3 0.13 3 0.13 3 0.13 3 0.13 3 0.13 3 0.13 3 0.13 3 0.13 3 0.13 3 0.13 3 Weight Lb. (Kg.) 0.5 0.2 0.5 0.2 0.5 0.2 0.5 0.2 1 0.5 1 0.5 2 0.9 2 0.9 3 1.4 5 2.3 7 3.2 11 5.0 12 5.4 16 7.3 20 9.1 26 11.8 30 13.6

100% 1.13 29 1.63 41 2.19 56 3.00 76 3.19 81 4.00 102 5.13 130 6.50 165 8.13 207 10.19 259 13.00 330 16.00 406 17.00 432 20.00 508 23.00 584 25.00 635 30.00 762

Notes: (1) The Open Area % is calculated as follows:Screen Area x 0.4 x 100 Area of Sch. 40/std. pipe.

General: 1. For further optional features see pages 21-22. 2. Other perforations and screen materials available. Please see page 24.

(2) Thicker material available upon request. Please contact factory. (3) Strainers are available in many materials with many different screen openings. Please consult factory. (4) Other sizes available on request.

3. For pressure loss information see page 25. 4. For ordering information please see page 38. 5. Dimensions shown are subject to change. Contact factory for certified prints when required.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series Y125 and Y150 Fabricated Y-StrainersStandard Features Standard sizes from 2 - 24. Available with RF or RTJ flanged (ASME B16.5), Buttweld (ASME B16.9) or grooved end connections. Standard thru bolt or grooved cover design. Custom modifications are available. May be installed in horizontal or vertical pipelines. All welders are qualified to ASME Section IX. Strainers designed to meet the requirements of ASME B31.1 and/or ASME B31.3. 304 SS perforated screens are standard. Drains connections are standard and are furnished with plug. Vents, differentials and special covers are optional.

Parts List and Standard Materials (Flanged End)Part Shell & Nozzles Reinforcement Pads (3) Flanges Coupling/threadolets: Plug Screen Retainer Ring Screen (2) Gasket (2) Stud Nut Carbon Steel A53 E/B / A106-B A516-70 A105 A105 A105 A36 304 SS 304 SS Spiral Wound A193-B7 A194-2H Stainless Steel (1) A312 A240 A182 A182 A182 A240 304 SS 304 SS Spiral Wound A193-B8-1 A194-8

Parts List and Standard Materials (Grooved End)Part Shell & Nozzles Flanges Plug Cover Screen (1) Gasket (1) Bolts Nuts Stainless Steel A312-304 A36 Zinc Plated B584 Brass Sizes 2-1/2 - 5 & 12: Ductile Iron Sizes 6 - 10: 304 SS 304 SS EPDM B633 B633

(1) 304 SS strainers use 304 grade material. 316 SS strainers use 316 grade material. Dual rated material may be used. (2) Recommended Spares. (3) When required and when used.

(1) Recommended Spares. (2) Lead-free construction complies with California Prop. 65 and proposed Federal Government lead-free standards. (3) Single, two-bolt, grooved style cover provides quick and easy access to screen.

Upper Pressure Limits (Non-Shock) and Lower Temperature Limits (Unless otherwise specified)IFC Model Y125FSBW Y125GSS4GW Y125FSS4BW / Y125FSS6BW Y125FSS4LBW / Y125FSS6LBW Y150FSBW Y150FSS4BW / Y150FSS6BW Y150FSS4LBW / Y150FSS6LBW Body Material Size Range in. (mm) Carbon Steel 304 SS 304 / 316 SS 304L / 316L SS Carbon Steel 304 / 316 SS 304L / 316L SS Maximum Design Pressure psig (Bars) (1) Low Temperature Limit M.D.M.T. F (C) -20 (-28.9) -20 (-28.9) -20 (-28.9) -20 (-28.9) -20 (-28.9) -20 (-28.9) -20 (-28.9) -20 (-28.9) -20 (-28.9) -20 (-28.9)

2 - 12 (50 - 300 mm) 200 (13.79) (2) 14 - 24 (350 - 600 mm) 150 (10.34) (2) 2 1/2 - 12 (65 -300 mm) 200 (13.79) (2) 2 - 12 (50 - 300 mm) 200 (13.79) (2) 14 - 24 (350 - 600 mm) 150 (10.34) (2) 2 - 12 (50 - 300 mm) 200 (13.79) (2) 14 - 24 (350 - 600 mm) 150 (10.34) (2) 2 - 12 (50 - 300 mm) 2 - 12 (50 - 300 mm) 2 - 12 (50 - 300 mm) 285 (19.65) (3) 275 (18.96) (3) 230 (15.86) (3)

(1) All strainers will be designed to the maximum design pressure unless an alternative design pressure / temperature combination is specified. In many cases a cost savings will result if lower design pressures are acceptable. (2) M.A.W.P. at 150F. (3) M.A.W.P. at 100F.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series Y125, Y150 and YG125SS4GW Dimensions

SERIES Y150F

D N.P.T.

SERIES Y125G

Standard ScreensFlanged End Size Range Opening 2- 8 (50 mm - 200 mm) 0.125 in. 10- 12 (250 mm - 300 mm) 0.125 in. 14- 24 (350 mm - 600 mm) 0.188 in. (3.2 mm) (3.2 mm) (4.8 mm) Grooved End Size range Opening 2.5-5 (65 mm - 125 mm) 0.063 in. (1.5 mm) 6-8 (150 mm - 200 mm) 0.125 in. (3.2 mm) 10-12 (250 mm - 300 mm) 0.188 in. (4.8 mm) Weight Lb. (kg.) Cover Grooved Flanged Grooved N/A 5 N/A 2 1/2 9 1 15 4 0.45 1/2 9 1.2 15 4 0.54 1/2 17 2.5 15 8 1.13 1/2 20 4.6 15 9 2.08 3/4 26 1.6 20 12 0.72 3/4 45 3.1 20 20 6 3/4 70 4.6 20 32 2 3/4 110 36 20 50 16 N/A 140 N/A 63 N/A 180 N/A 82 N/A 220 N/A 100 N/A 285 N/A 129 N/A 430 N/A 195 Unit Flanged 28 13 81 37 81 37 85 39 110 50 145 66 256 116 380 172 700 317 750 340 905 410 1125 510 1415 641 1825 827 Grooved N/A 21 10 26 12 33 15 46 21 70 32 91 41 134 61 225 102 N/A N/A N/A N/A N/A.

Dimensional DataSize in (mm) End type 2 50 2.5 65 3 80 4 100 5 125 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 A in (mm) Flanged 10.81 275 13.38 340 13.38 340 14.75 375 17.25 438 22.00 559 24.00 610 31.50 800 32.75 832 39.75 1010 45.25 1149 48.50 1232 53.75 1365 64.00 1626 B in (mm) Grooved Flanged N/A 8.25 210 9.5 10.25 241 260 9.63 10.25 244 260 11.63 10.50 295 267 15.13 12.50 384 318 18.00 14.00 457 356 21.13 17.75 537 451 25.50 22.00 648 559 29.38 25.00 746 635 N/A 27.00 686 N/A 30.88 784 N/A 33.88 861 N/A 39.00 991 N/A 44.00 1118 C D in in (mm) (mm) Grooved Flanged Grooved Flanged N/A 13.25 N/A 1/2 337 15 8.81 16.44 14.06 1 224 418 357 25 9.25 16.44 14.75 1 235 418 375 25 11.25 16.75 18.50 1-1/2 286 425 470 40 13.25 20.00 21.00 1-1/2 337 508 533 40 15.81 22.44 25.75 2 402 570 654 50 19.63 28.44 32.31 2 499 722 821 50 24.69 35.25 41.00 2 627 895 1041 50 27.88 40.00 47.00 2 708 1016 1194 50 N/A 43.25 N/A 2 1099 50 N/A 49.50 N/A 2 1257 50 N/A 54.25 N/A 2 1378 50 N/A 62.50 N/A 2 1588 50 N/A 70.50 N/A 2 1791 50

Notes: (1) Differentials are optional.

(2) Buttweld dimensions are same as flanged.

General: 1. For further optional features see pages 21-22. 2. Other perforations and screen materials available. Please see page 24.

3. For pressure loss information see page 26. 4. For ordering information please see page 38. 5. Dimensions shown are subject to change. Contact factory for certified prints when required.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series T150, T300 and T600 Tee StrainersStandard Features Standard Sizes from 2 - 24. Larger sizes available upon request. Available with RF or RTJ flanged (ASME B16.5) or Buttweld (ASME B16.9) end connections. Standard thru bolt cover design. Three flow configurations are available. 304 SS perforated screens are standard. Upstream and downstream screen supports allow for bi-directional flow (1). May be installed in horizontal or vertical pipelines. All welders are qualified to ASME Section IX. Strainers designed to meet the requirements of ASME B31.1, ASME B31.3 and/or ASME Section VIII, Div. 1. Drains, vents, differentials and special covers are optional.(1) This requirement must be specified for strainer screens requiring mesh lining.

Parts List and Standard MaterialsPart Carbon Steel Low Temp.Carbon Steel (-50F) Stainless Steel (1) Body A234-WPB A420-WPL6 A403-WP Flanges A105 A350-LF2 A182 Screen (2) 304 SS 304 SS 304 SS Internal support ribs: Carbon Steel 304 SS 304 SS Coupling/threadolets A105 A350-LF2 A182 Plug (3) A105 A350-LF2 A182 Gasket (2) 304 SS Spiral Wound 304 SS Spiral Wound 304 SS Spiral Wound Stud A193-B7 A193-B7 A193-B8-1 Nut A194-2H A194-2H A194-8 (1) 304SS strainers use 304 grade material. 316SS strainers use 316 grade material. Dual rated material may be used. (2) Recommended Spares. (3) When required and when used. (4) NACE MR01-75 qualification available upon request. Material specifications will change. (5) Also available in other alloys.

Upper Pressure Limits (Non-Shock) and Lower Temperature Limits (Unless otherwise specified)Maximum Design Pressure Lower Temperature Limit at 100F psig (Bars) (1) M.D.M.T. F (C) T150FSBW Carbon Steel 285 (19.65) -20 (-28.9) T150FLCBW Low Temp. Carbon Steel 285 (19.65) -50 (-45.6) T150FSS4BW / T150FSS6BW 304 / 316 SS 275 (18.96) -20 (-28.9) Optional -425 (-253.9) T150FSS4LBW / T150FSS6LBW 304L / 316L SS 230 (15.86) -20 (-28.9) Optional -425 (-253.9) T300FSBW Carbon Steel 740 (51.02) -20 (-28.9) T300FLCBW Low Temp. Carbon Steel 740 (51.02) -50 (-45.6) T300FSS4BW / T300FSS6BW 304 / 316 SS 720 (49.64) -20 (-28.9) Optional -425 (-253.9) T300FSS4LBW / T300FSS6LBW 304L / 316L SS 600 (41.37) -20 (-28.9) Optional -425 (-253.9) T600FSBW Carbon Steel 1480 (102.04) -20 (-28.9) T600FLCBW Low Temp. Carbon Steel 1480 (102.04) -50 (-45.6) T600FSS4BW / T600FSS6BW 304 / 316 SS 1440 (99.28) -20 (-28.9) Optional -425 (-253.9) T600SS4LBW / T600FSS6LBW 304L / 316L SS 1200 (82.74) -20 (-28.9) Optional -425 (-253.9) (1) All strainers will be designed to the maximum design pressure at 100F unless an alternative design pressure / temperature combination is specified. (2) Lower and higher M.D.M.T.s are available upon request. IFC Model (RF Flanged) Body Material

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series T150 Dimensional Data

STYLE 1

STYLE 2 Opening 0.125 in. (3.2 mm) 0.125 in. (3.2 mm) 0.188 in. (4.8 mm)

STYLE 3 Gauge Thickness 22 16 11

Standard Screens2- 8 10- 12 14- 24 Size Range (50mm-200mm) (250mm-300mm) (350mm-600mm)

Dimensional DataSize in (mm) A in (mm) B in (mm) C in (mm) D in (mm)11.00 279 13.75 349 16.25 413 19.25 489 21.25 540 26.00 660 30.00 762 35.00 889 39.00 991 42.00 1067 47.00 1194 51.38 1305 58.00 1473

E in (mm)12.50 318 15.25 387 18.38 467 21.63 549 23.68 606 29.00 737 33.50 851 39.00 991 43.00 1092 46.00 1168 51.50 1308 56.38 1432 63.00 1600

Weight Lb. (kg.) Unit Cover Flanged Buttweld5 2 9 4 17 8 20 9 26 12 45 20 70 32 110 50 140 64 180 82 220 100 285 129 430 195 28 13 52 24 79 36 105 8 140 64 230 104 325 148 500 227 710 322 860 390 1025 465 1350 613 2100 953 16 7 32 15 49 22 67 30 92 42 152 69 221 100 340 154 490 222 580 263 725 329 990 449 1580 717

2 10.00 5.00 5.75 50 254 127 146 3 12.25 6.75 7.06 80 311 172 179 4 14.25 8.25 8.06 100 362 210 205 5 16.75 9.75 9.31 125 425 248 237 6 18.25 11.25 10.13 150 464 286 257 8 22.00 14.00 12.13 200 559 356 308 10 25.00 17.00 13.69 250 635 432 348 12 29.00 20.00 15.75 300 737 508 400 14 32.00 22.00 17.38 350 813 559 441 16 34.00 24.00 18.44 400 864 610 468 18 38.00 27.00 20.56 450 965 686 522 20 41.36 30.00 22.38 500 1051 762 568 24 46.00 34.00 24.88 600 1168 864 632 Notes: (1) Drains and differentials are optional.(2) Cover lifting lug standard on sizes 10 and larger.

General: 1. For further optional features see pages 21-22. 2. Other perforations and screen materials available. Please see page 24.

3. For pressure loss information see page 26. 4. For ordering information please see page 38. 5. Dimensions shown are subject to change. Contact factory for certified prints when required.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series T300 Dimensional Data

STYLE 1

STYLE 2

STYLE 3

Standard Screens2- 8 10- 12 14- 24 Size Range (50 mm-200 mm) (250 mm-300 mm) (350 mm-600 mm) Opening 0.125 in. (3.2 mm) 0.125 in. (3.2 mm) 0.188 in. (4.8 mm) Gauge Thickness 22 16 11

Dimensional DataSize A B C in in in in (mm) (mm) (mm) (mm) 2 10.50 5.00 6.13 50 267 127 156 3 13.00 6.75 7.63 80 330 172 194 4 15.00 8.25 8.75 100 381 210 222 5 17.50 9.75 10.13 125 445 248 257 6 19.00 11.25 10.94 150 483 286 278 8 22.75 14.00 13.00 200 578 356 330 10 26.25 17.00 15.00 250 667 432 381 12 30.25 20.00 17.13 300 768 508 435 14 33.25 22.00 18.75 350 845 559 476 16 35.50 24.00 20.00 400 902 610 508 18 39.50 27.00 22.13 450 1003 686 562 20 32.75 30.00 23.88 500 832 762 606 24 47.25 34.00 26.38 600 1200 864 670 Notes: (1) Drains and differentials are optional.(2) Cover lifting lug standard on sizes 8 and larger.

D in (mm) 11.50 292 14.50 368 17.00 432 20.00 508 22.00 559 26.75 679 31.25 794 36.25 921 40.25 1022 43.50 11.05 48.50 1232 42.75 1086 59.25 1505

E in (mm) 13.00 330 16.00 406 19.13 486 22.38 568 24.63 625 29.75 756 34.75 883 40.25 1022 44.25 1124 47.50 1207 53.00 1346 47.75 1213 64.25 1632

Weight Lb. (kg.) Unit Cover Flanged Buttweld 8 42 24 4 19 11 16 72 42 7 33 19 27 125 75 12 57 34 35 160 96 16 73 44 50 225 141 23 102 62 81 350 216 37 159 98 124 495 313 56 225 142 185 765 485 84 347 220 250 1025 665 114 465 302 295 1320 820 134 599 372 395 1700 1060 179 772 481 505 2250 1450 229 1022 658 790 2340 2240 359 1544 1017

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series T600 Dimensional Data

STYLE 1

STYLE 2 Opening 0.125 in. (3.2 mm) 0.125 in. (3.2 mm) 0.188 in. (4.8 mm)

STYLE 3 Gauge Thickness 22 16 11

Standard Screens2- 8 10- 12 14- 24 Size Range (50 mm-200 mm) (250 mm-300 mm) (350 mm-600 mm)

Dimensional DataSize in (mm) 2 50 3 80 4 100 5 125 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 A in (mm) 11.25 286 13.75 349 16.75 425 19.25 489 21.00 533 25.00 635 29.50 749 32.75 832 35.50 902 38.50 978 42.00 1067 45.50 1156 50.50 1283 B in (mm) 5.00 127 6.75 172 8.25 210 9.75 248 11.25 286 14.00 356 17.00 432 20.00 508 22.00 559 24.00 610 27.00 686 30.00 762 34.00 864 C in (mm) 6.88 175 8.38 213 10.13 257 11.63 295 12.63 321 14.94 379 17.50 445 19.25 489 20.75 527 22.50 572 24.50 622 26.50 673 29.50 749 D in (mm) 12.25 311 15.25 387 18.75 476 21.75 552 24.00 610 29.00 737 34.50 876 38.75 984 42.50 1080 46.50 1181 51.00 1295 55.50 1410 62.50 1588 E in (mm) 13.75 349 16.75 425 20.88 530 24.13 613 25.63 676 32.00 813 38.00 965 42.75 1086 46.50 1181 50.50 1283 55.50 1410 60.50 1537 67.50 1715 Weight Lb. (kg.) Unit Cover Flanged Buttweld 10 52 28 5 24 13 20 100 54 9 45 25 41 190 106 19 86 48 68 295 159 31 134 72 86 365 203 39 166 92 140 580 340 64 263 154 230 900 520 104 409 236 295 1150 700 134 522 318 355 1480 920 161 672 418 495 1950 1170 225 885 531 630 2450 1500 286 1112 681 810 3150 1970 368 1430 894 1250 4600 2940 568 2088 1335

Notes: (1) Drains and differentials are optional.(2) Cover lifting lug standard on sizes 6 and larger.

General: 1. For further optional features see pages 21-22. 2. Other perforations and screen materials available. Please see page 24.

3. For pressure loss information see page 26. 4. For ordering information please see page 38. 5. Dimensions shown are subject to change. Contact factory for certified prints when required.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series B125, B150, B300 and B600 Fabricated Basket StrainersStandard Features Standard sizes from 2 - 24. Larger sizes available upon request. Available with RF or RTJ flanged (ASME B16.5) or Buttweld (ASME B16.9) end connections. Standard thru bolt cover design. Custom designs are available. Perforated screens are standard. May be installed in horizontal pipelines. All welders are qualified to ASME Section IX. Strainers designed to meet the requirements of ASME B31.1, ASME B31.3 and/or ASME Section VIII, Div. 1. Drain is standard and is complete with plug. Vents, differentials and special covers are optional.

Parts List and Standard MaterialsPart Carbon Steel LowTemp.CarbonSteel (-50 F) Stainless Steel (1) Shell A53 E/B / A106-B A333-6 A312 Nozzles A53 E/B / A106-B A333-6 A312 Reinforcement Pads (3) A516-70 A516-70 A240 Flanges A105 A350-LF2 A182 Heads A234-WPB / A516-70 A420-WPL6 A403-WP Coupling/threadolets A105 A350-LF2 A182 Plug A105 A350-LF2 A182 Basket (2) 304 SS 304 SS 304 SS Gasket (2) 304 SS Spiral Wound 304 SS Spiral Wound 304 SS Spiral Wound Stud A193-B7 A193-B7 A193-B8-1 Nut A194-2H A194-2H A194-8 (1) 304SS strainers use 304 grade material. 316SS strainers use 316 grade material. Dual rated material may be used. (2) Recommended Spares. (3) When required and when used. (4) NACE MR01-75 qualification available upon request. Material specifications will change. (5) For strainers designed to ASME Section VIII, Div. 1 the A designation becomes SA.

Upper Pressure Limits (Non-Shock) and Lower Temperature Limits (Unless otherwise specified)Maximum Design Pressure Lower Temperature Limit at 100F psig (Bars) (1) M.D.M.T. F (C) B125FSBW5 Carbon Steel - Epoxy Coated 175 psi Water -20 (-28.9) B150FSBW Carbon Steel 285 (19.65) -20 (-28.9) B150FLCBW Low Temp. Carbon Steel 285 (19.65) -50 (-45.6) B150FSS4BW / B150FSS6BW 304 / 316 SS 275 (18.96) -20 (-28.9) Optional -425 (-253.9) B150FSS4LBW / B150FSS6LBW 304L / 316L SS 230 (15.86) -20 (-28.9) Optional -425 (-253.9) B300FSBW Carbon Steel 740 (51.02) -20 (-28.9) B300FLCBW Low Temp. Carbon Steel 740 (51.02) -50 (-45.6) B300FSS4BW / B300FSS6BW 304 / 316 SS 720 (49.64) -20 (-28.9) Optional -425 (-253.9) B300FSS4LBW / B300FSS6LBW 304L / 316L SS 600 (41.37) -20 (-28.9) Optional -425 (-253.9) B600FSBW Carbon Steel 1480 (102.04) -20 (-28.9) B600FLCBW Low Temp. Carbon Steel 1480 (102.04) -50 (-45.6) B600FSS4BW / B600FSS6BW 304 / 316 SS 1440 (99.28) -20 (-28.9) Optional -425 (-253.9) B600FSS4LBW / B600FSS6LBW 304L / 316L SS 1200 (82.74) -20 (-28.9) Optional -425 (-253.9) (1) All strainers will be designed to the maximum design pressure at 100F unless an alternative design pressure / temperature combination is specified. In many cases a cost savings will result if lower design pressures are acceptable. (2) Lower and higher M.D.M.T.s are available upon request. IFC Model (Flanged) Body Material

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series B125 and B150 Dimensional Data

SERIES B150 STYLE 1

SERIES B125 STYLE 5

Standard ScreensSeries 150B - Style 1 Size Range Opening 2- 8 (50 mm - 200 mm) 0.125 in. (3.2 mm) 10- 12 (250 mm - 300 mm) 0.125 in. (3.2 mm) 14- 24 (250 mm - 600 mm) 0.188 in. (4.8 mm) Series 125B - Style 5 Size Range Opening 3- 10 (80 mm - 250 mm) 0.25 in. (6.4 mm) Notes: These strainers are UL Listed for Fireline Service.

Dimensional DataSize A B C D in in in in in (mm) (mm) (mm) (mm) (mm) Style 1 5 1 5 1 5 1 2 12.75 N/A 18.63 N/A 11.13 N/A 6.63 50 324 473 283 168 3 14.00 14.13 20.50 18.44 12.50 10.63 8.63 80 356 359 521 468 318 270 219 4 16.00 21.00 22.25 18.44 14.00 10.63 8.63 100 406 533 565 468 356 270 219 5 18.00 N/A 24.25 N/A 17.00 N/A 10.75 125 457 616 432 273 6 20.00 26.88 26.50 20.19 17.00 11.06 10.75 150 508 683 673 513 432 281 273 8 22.00 31.25 32.00 22.88 21.00 12.06 12.75 200 559 794 813 581 533 306 324 10 32.00 30.00 41.50 27.13 25.00 14.81 16.00 250 813 762 1054 689 635 376 406 12 35.00 N/A 44.75 N/A 28.00 N/A 18.00 300 889 1137 711 457 14 37.00 N/A 48.75 N/A 33.00 N/A 20.00 350 940 1238 838 508 16 42.00 N/A 54.25 N/A 36.00 N/A 24.00 400 1067 1378 914 610 18 46.50 N/A 60.00 N/A 40.00 N/A 24.00 450 1181 1524 1016 610 20 52.00 N/A 68.00 N/A 46.00 N/A 30.00 500 1321 1727 1168 762 24 64.00 N/A 82.75 N/A 55.00 N/A 36.00 600 1626 2102 1397 914 Notes: (1) Vents and Differentials are optional.(2) Cover lifting lug standard on sizes 10 and larger.

E in (mm) 5 1 N/A 25.00 635 8.63 28.50 219 724 8.63 30.50 219 775 N/A 30.50 775 14.00 36.00 356 914 18.00 43.00 457 1092 20.00 58.00 508 1473 N/A 61.50 1562 N/A 64.50 1638 N/A 72.50 1842 N/A 80.00 2032 N/A 90.00 2286 N/A 110.50 2807

5 N/A 26.25 667 26.25 667 N/A 29.32 745 33.70 856 39.45 1002 N/A N/A N/A N/A N/A N/A

F in (mm) 1 1/2 15 3/4 20 1 25 1 25 1 25 1-1/2 40 1-1/2 40 1-1/2 40 2 50 2 50 2 50 2 50 2 50

5 N/A 2 50 2 50 N/A 3 80 3 80 3 80 N/A N/A N/A N/A N/A N/A

G Weight in (mm) Cover 5 1 5 N/A 26 N/A 12 2.13 45 28 54 20 13 2.13 45 28 54 20 13 N/A 70 N/A 32 3.00 70 64 76 32 29 3.00 110 143 76 50 65 3.25 180 184 83 82 83 N/A 220 N/A 100 N/A 285 N/A 129 N/A 430 N/A 195 N/A 430 N/A 195 N/A 965 N/A 437 N/A 1540 N/A 698

Lb. (kg.) Unit 1 5 85 N/A 39 140 107 63 48 145 142 66 64 160 N/A 72 205 303 93 137 420 398 190 180 650 463 294 210 1205 N/A 546 1600 N/A 725 1965 N/A 890 2200 N/A 997 3200 N/A 1450 4500 N/A 2039

General: 1. For further optional features see pages 21-22. 2. Other perforations and screen materials available. Please see page 24.

3. For pressure loss information see page 27. 4. For ordering information please see page 38. 5. Dimensions shown are subject to change. Contact factory for certified prints when required.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series B300 Dimensional DataStandard ScreensSize Range Opening Gauge Thickness

2- 8 (50 mm-200 mm)

0.125 in. (3.2 mm)

22

10- 12 (250 mm-300 mm)

0.125 in. (3.2 mm)

16

14- 16 (350 mm-400 mm)

0.188 in. (4.8 mm)

11

Dimensional DataSize in (mm) 2 50 3 80 4 100 5 125 6 150 8 200 10 250 12 300 14 350 16 400 A in (mm) 14.88 378 16.50 419 18.63 473 20.25 514 24.50 622 24.88 632 35.38 899 39.38 1000 41.50 1054 47.50 1207 B in (mm) 20.00 508 25.00 635 26.00 660 28.00 711 30.75 781 35.50 902 42.50 1080 47.75 1213 52.50 1334 60.00 1524 C in (mm) 12.00 305 15.75 400 15.88 403 17.13 435 19.13 486 22.00 559 27.25 692 30.38 772 33.00 838 38.88 988 D in (mm) 6.63 168 8.63 219 8.63 219 10.75 273 10.75 273 12.75 324 16.00 406 18.00 457 20.00 508 24.00 610 E in (mm) 28.00 711 34.25 870 36.13 918 38.88 987 42.38 10.76 55.75 1416 57.25 1454 65.12 1654 72.00 1829 81.13 2061 F in (mm) 1/2 15 3/4 20 1 25 1 25 1 25 1-1/2 40 1-1/2 40 1-1/2 40 2 50 2 50 Weight Lb. (kg.) Cover 50 23 81 37 81 37 125 57 125 57 185 84 295 134 395 179 505 229 790 358 Unit 195 89 250 114 300 136 400 182 480 218 681 310 1100 500 1650 750 2600 1182 2750 1250

Notes: (1) Vents and differentials are optional.(2) Cover lifting lug standard on sizes 8 and larger.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series B600 Dimensional DataStandard ScreensSize Range Opening Gauge Thickness

2- 8 (50 mm-200 mm)

0.125 in. (3.2 mm)

22

10- 12 (250 mm-300 mm)

0.125 in. (3.2 mm)

16

14- 16 (350 mm-400 mm)

0.188 in. (4.8 mm)

11

Dimensional DataSize in (mm) 2 50 3 80 4 100 5 125 6 150 8 200 10 250 12 300 14 350 16 400 A in (mm) 18.38 467 23.88 606 23.88 606 28.13 714 29.88 759 37.00 940 42.50 1080 44.00 1118 46.00 1168 54.00 1372 B in (mm) 21.88 556 26.50 673 29.00 737 32.13 816 36.25 921 38.75 984 47.25 1200 53.25 1353 60.00 1524 70.00 1778 C in (mm) 12.00 305 15.75 400 17.38 441 19.13 486 21.38 543 23.38 594 27.25 692 30.38 772 35.13 892 42.25 1073 D in (mm) 6.63 168 8.63 219 8.63 219 10.75 273 10.75 273 12.75 324 16.00 406 18.00 457 20.00 508 24.00 610 E in (mm) 31.75 806 37.25 946 44.63 1133 45.13 1146 51.13 1299 54.13 1375 68.25 1708 76.13 1934 84.88 2156 97.75 2483 F in (mm) 1/2 15 3/4 20 1 25 1 25 1 25 1-1/2 40 1-1/2 40 1-1/2 40 2 50 2 50 Weight Lb. (kg.) Cover 86 39 140 64 140 64 230 105 230 105 295 134 495 225 630 286 810 367 1250 567 Unit 245 111 360 164 400 182 750 341 825 375 1200 545 1600 727 1800 818 3000 1364 3200 1455

Notes: (1) Vents and differentials are optional.(2) Cover lifting lug standard on sizes 6 and larger.

General: 1. For further optional features see pages 21-22. 2. Other perforations and screen materials available. Please see page 24.

3. For pressure loss information see page 27. 4. For ordering information please see page 38. 5. Dimensions shown are subject to change. Contact factory for certified prints when required.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series DB125 Duplex StrainersDesign Features Inlet/outlet connections are FF flanged in accordance with ASME B16.1. Four individual operated butterfly valves (IFC series BI125W/L) are used to divert and isolate flow. 304 SS perforated screens are standard. Cast components. Quick opening clamp covers (MAWP 50 psig) are optional. Drain connections furnished with plug as standard. Inexpensive construction and quick delivery.

Parts List and Standard MaterialsPart Basket Strainers x 2 Description Specifications IFC Model B125FIB1 or B125FIC1 ASTM A126-B Screen (1): Type 304 SS Cover Gasket (1): Graphite IFC Series BI125W/L Seat: Disc: Cast Iron Carbon Steel Rubber ASTM A126-B EPDM or Buna-N 316 SS, Bronze or Ductile Iron. ASTM A126-B ASTM A193-B7, A194-2H

Upper Pressure Limits (Non-Shock)Size 5 - 12 (125 - 300 mm) M.A.W.P. 200 psig.

Butterfly Valves x 4

Lower Temperature LimitsBody Material A126-B Lower Limit F (C) -20 (-28.9)

Flanged Fittings x 4 Hardware: Gaskets

Velocity LimitsFluids Gases 30 Ft/s (10 m/s) 200 Ft/s (65 m/s)

(1) Recommended Spares. (2) Consult the IFC Simplex Basket Strainer and Butterfly Valve brochures for detailed information on these items.

Notes: For greater velocities consult factory.

IFC Series DB125 Pressure Temperature Chart (Using IFC BI125W/L Butterfly Valves)

300Temperature (oF)

275 250 225 200 175 150 0 50

MAX. TEMP. VITON

MAX. TEMP. EPDM

MAX. TEMP. BUNA-N

180 200 250

100 150 Pressure (Psig)

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series DB125 Duplex Strainers

Standard ScreensSize Range 5- 8 (125mm-200mm) 10- 12 (250mm-300mm) Opening 0.125 in. (3.2 mm) 0.125 in. (3.2 mm) Gauge Thickness 22 16

Dimensional DataSize in (mm) 5 125 6 150 8 200 10 250 12 300 A in (mm) 47.38 1203 51.00 1295 61.00 1549 69.25 1759 79.25 2013 B in (mm) 15.13 384 16.13 410 18.13 461 22.13 562 24.13 613 C in (mm) 6.63 168 7.00 178 9.25 235 10.75 273 13.38 340 D in (mm) 8.00 203 8.62 219 11.75 298 13.75 349 16.38 416 E in (mm) 21.25 540 22.62 575 30.25 768 35.25 895 43.13 1096 F NPT in (mm) 1 25 1 25 1-1/2 40 1-1/2 40 2 50 Weight Lb. (kg.) Cover 20 9 26 12 45 20 70 32 110 50 Unit 725 329 800 363 1400 636 1850 840 3300 1497

Notes: (1) Strainers may be supplied with 50 psig clamped covers. Please contact factory.(2) Vents and differential connections are optional.

General: 1. For further optional features see pages 21-22. 2. Other perforations and screen materials available. Please see page 24.

3. For pressure loss information see page 27. 4. For ordering information please see page 38. 5. Dimensions shown are subject to change. Contact factory for certified prints when required.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series DB150 Duplex StrainersDesign Features Standard sizes from 6 - 24. Available with RF or RTJ flanged (ASME B16.5) or Buttweld (ASME B16.9) end connections. Standard thru bolt cover design. Custom modifications are available. May be installed in horizontal pipelines. All welders qualified to ASME Section IX. Strainers designed to meet the requirements of ASME B31.1, ASME B31.3 and/or ASME Section VIII, Div.1. Four individual operated butterfly valves (IFC series BI125W/L) are used to divert and isolate flow. Ball, gate and other isolation valve types may be used if requested. 304 SS perforated screens are standard. Drains and differential connections are standard and are furnished with plug. Vents and special covers are optional (See pages 21-22).

Parts List and Standard MaterialsPart Specifications Carbon Steel Basket Strainers x 2 IFC Series B150 (2) Fabricated Carbon Steel Screen (3): Type 304 SS Cover Gasket (3): 304 SS Spiral Wound Butterfly Valves x 4 IFC Series BI125W/L (4) ASTM A126-B (5) Seat: EPDM or Buna-N Disc: 316 SS, Bronze or Ductile Iron. Manifolds x 2 Pipe A53 E/B, A106-B Flanges A105 Couplings / Threadolets A105 Hardware: Studs A193-B7 Nuts A194-2H Gaskets 304 SS Spiral Wound (1) 304 SS strainers use 304 grade material, 316 SS strainers use 316 grade material, etc. (2) See page 13 for detailed information. (3) Recommended Spares. (4) Consult the IFC Butterfly Valve brochure for detailed information. (5) Non-wetted. (6) For strainers designed to ASME Section VIII, Div. 1 the A designation becomes SA. Description Stainless Steel (1) Fabricated Stainless Steel Type 304 SS 304 SS Spiral Wound ASTM A126-B (5) EPDM or Buna-N 316 SS, Bronze or Ductile Iron. A312 A182 A182 A193-B8-1 A194-8 304 SS Spiral Wound

IFC Series DB150 Pressure Temperature Chart (Using IFC BI125W/L Butterfly Valves)300

Temperature (oF)

275 250 225 200 175 150 0

MAX. TEMP. VITON

S S I E SIZ

I SIZ 1 1 ES ES

2"2"-

MAX. TEMP. EPDM MAX. TEMP. BUNA-N

"4"24 24"

2" 12"180 200 250

50

100 150 Pressure (Psig)

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series DB150 - Style 1 Duplex Strainers

Standard ScreensSize Range 2- 8 (50mm-200mm) 10- 12 (250mm-300mm) 14- 24 (350mm-600mm) Opening 0.125 in. (3.2 mm) 0.125 in. (3.2 mm) 0.188 in. (4.8 mm) Gauge Thickness 22 16 11

Dimensional Data (Style 1)Size (1) in (mm) 2 50 3 80 4 100 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 Notes: (1) A in (mm) 32.00 813 38.00 965 38.00 965 48.00 1219 57.00 1448 76.00 1930 85.00 2159 92.00 2337 104.00 2642 116.00 2946 120.00 3048 132.00 3353 B in (mm) 20.00 508 24.00 610 26.00 660 36.00 914 43.00 1092 55.00 1397 57.00 1448 60.00 1524 64.00 1626 82.00 2083 87.00 2210 94.00 2388 C in (mm) 6.00 152 8.00 203 8.00 203 10.00 254 12.00 305 13.00 330 14.00 356 18.00 457 20.00 508 20.00 508 24.00 610 28.00 711 D in (mm) 11.00 279 14.00 356 14.00 356 17.00 432 21.00 533 25.00 635 28.00 711 33.00 838 36.00 914 40.00 1016 46.00 1168 40.00 1016 E in (mm) 25.00 635 29.00 737 31.00 787 36.00 914 43.00 1092 58.00 1473 62.00 1575 65.00 1651 72.00 1829 80.00 2032 90.00 2286 110.00 2794 F NPT in (mm) 3/4 20 1 25 1 25 1 25 1 25 1-1/2 40 1-1/2 40 2 50 2 50 2 50 2 50 2 50 G NPT in (mm) 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 3/4 20 3/4 20 3/4 20 3/4 20 Weight Lb. (kg.) Cover 26 12 45 20 45 20 70 32 110 50 180 82 220 100 285 129 430 195 430 195 965 438 1540 699 Unit 280 127 300 136 450 204 700 318 1400 636 1850 840 2750 1249 4000 1816 5300 2406 5900 2679 8000 3632 9000 4086

Other sizes available. Consult factory. (2) Dimensions can be modified to suit the customers requirements. Please consult factory. (3) Legs and other supports are available. Please contact factory. (4) Vents are optional.

General: 1. For further optional features see pages 21-22. 2. Other perforations and screen materials available. Please see page 24.

3. For pressure loss information see page 27. 4. For ordering information please see page 38. 5. Dimensions shown are subject to change. Contact factory for certified prints when required.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series DB150 - Style 2 Duplex Strainers

Standard ScreensSize Range 2- 8 (50mm-200mm) 10- 12 (250mm-300mm) 14- 24 (350mm-600mm) Opening 0.125 in. (3.2 mm) 0.125 in. (3.2 mm) 0.188 in. (4.8 mm) Gauge Thickness 22 16 11

Dimensional Data (Style 2)Size (1) A B C in in in in (mm) (mm) (mm) (mm) 2 36.00 13.00 6.00 50 914 330 152 3 42.00 16.00 8.00 80 1067 406 203 4 49.00 16.00 8.00 100 1245 406 203 6 62.00 18.00 10.00 150 1575 457 254 8 74.00 22.00 12.00 200 1880 559 305 10 92.00 28.00 13.00 250 2337 711 330 12 104.00 24.00 14.00 300 2642 610 356 14 114.00 32.00 18.00 350 2896 813 457 16 126.00 32.00 20.00 400 3200 813 508 18 140.00 40.00 20.00 450 3556 1016 508 20 156.00 40.00 24.00 500 3962 1016 610 24 182.00 48.00 28.00 600 4623 1219 711 Notes: (1) Other sizes available. Consult factory. D in (mm) 11.00 279 14.00 356 14.00 356 17.00 432 21.00 533 25.00 635 28.00 711 33.00 838 36.00 914 40.00 1016 46.00 1168 40.00 1016 E in (mm) 25.00 635 29.00 737 31.00 787 36.00 914 43.00 1092 58.00 1473 62.00 1575 65.00 1651 72.00 1829 80.00 2032 90.00 2286 110.00 2794 F NPT in (mm) 3/4 20 1 25 1 25 1 25 1 25 1-1/2 40 1-1/2 40 2 50 2 50 2 50 2 50 2 50 G NPT in (mm) 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 3/4 20 3/4 20 3/4 20 3/4 20 Weight Lb. (kg.) Cover 26 12 45 20 45 20 70 32 110 50 180 82 220 100 285 129 430 195 430 195 965 438 1540 699 Unit 280 127 300 136 450 204 700 318 1400 636 1850 840 2750 1249 4000 1816 5300 2406 5900 2679 8000 3632 9000 4086

(2) Dimensions can be modified to suit the customers requirements. Please consult factory. (3) Legs and other supports are available. Please contact factory. (4) Vents are optional.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

IFC Series DB150 - Style 3 Duplex Strainers

Standard ScreensSize Range 2- 8 (50mm-200mm) 10- 12 (250mm-300mm) 14- 24 (350mm-600mm) Opening 0.125 in. (3.2 mm) 0.125 in. (3.2 mm) 0.188 in. (4.8 mm) C in (mm) 6.00 152 8.00 203 8.00 203 10.00 254 12.00 305 13.00 330 14.00 356 18.00 457 20.00 508 20.00 508 24.00 610 28.00 711 D in (mm) 20.00 508 22.50 572 25.50 648 31.00 787 35.00 889 39.00 991 48.00 1219 50.00 1270 54.00 1372 56.00 1422 64.00 1626 76.00 1930 E in (mm) 14.00 356 14.50 368 17.50 445 21.00 533 23.00 584 28.00 660 30.00 762 32.00 813 34.00 864 36.00 914 40.00 1016 48.00 1219 F in (mm) 32.00 813 38.50 978 41.50 1054 51.00 1295 59.00 1499 65.00 1651 72.00 1829 86.00 2184 94.00 2388 96.00 2438 112.00 2845 132.00 3353 G NPT in (mm) 3/4 20 1 25 1 25 1 25 1 25 1-1/2 40 1-1/2 40 2 50 2 50 2 50 2 50 2 50 Gauge Thickness 22 16 11 H NPT in (mm) 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 1/2 15 3/4 20 3/4 20 3/4 20 3/4 20 Weight Lb. (kg.) Cover 26 12 45 20 45 20 70 32 110 50 180 82 220 100 285 129 430 195 430 195 965 438 1540 699 Unit 280 127 300 136 450 204 700 318 1400 636 1850 840 2750 1249 4000 1816 5300 2406 5900 2679 8000 3632 9000 4086

Dimensional Data (Style 3)Size (1) in (mm) 2 50 3 80 4 100 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 Notes: (1) A in (mm) 10.00 254 12.25 311 14.25 362 18.25 464 22.00 559 25.00 635 29.00 737 32.00 813 34.00 864 38.00 965 41.38 1051 46.00 1168 B in (mm) 26.00 660 30.00 762 36.00 914 44.00 1118 50.00 1270 64.00 1626 72.00 1829 76.00 1930 84.00 2134 94.00 2388 104.00 2642 122.00 3099

Other sizes available. Consult factory. (2) Dimensions can be modified to suit the customers requirements. Please consult factory. (3) Legs and other supports are available. Please contact factory. (4) Vents are optional.

General: 1. For further optional features see pages 21-22. 2. Other perforations and screen materials available. Please see page 24.

3. For pressure loss information see page 27. 4. For ordering information please see page 38. 5. Dimensions shown are subject to change. Contact factory for certified prints when required.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Quick Opening Covers and Cover Removal AidsThe quick release covers and cover removal aids available on IFC fabricated strainers are distinguished by their compact size and functional design. Materials of construction are in accordance with ASME specifications and manufacturing complies with the applicable rules of the ASME Code for Pressure Piping and with the ASME Boiler and Pressure Vessel Code.

Cover Type BD - Davit AssemblyThe Davit assembly is used to enable the user to swing the cover away from the strainer in order to facilitate basket or screen removal for cleaning. Its primary use is for larger sized strainers where cover removal is difficult. The davit assembly is an inexpensive alternative to quick release covers, especially when operating conditions require a bolted cover to be utilized.

Cover Type H T-Bolt Hinged CoverThe T-bolt hinged cover is used for nominal pressure applications while being the most inexpensive closure available on IFC fabricated strainers. The T-bolt hinged cover is opened quickly and easily using an O-Ring as a seal. The operator merely loosens the T-bolts until they clear the holding lugs and allow the head to be swung open on its hinge. Camlock and Breakover Wrench assemblies are also available that eliminate the need for a wrench.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Quick Opening Covers and Cover Removal AidsCover Type Y Yoke Hinged CoverThe yoke hinged closure is a true ANSI rated closure. Used primarily on high pressure applications, yoke hinged covers are available with 150#, 300#, 600#, 900#, and 1500# ANSI ratings. Yoke hinged covers available on IFC fabricated strainers are available with a wide range of operating aids ranging from singlelever chain and sprocket drives to completely automated types. O-rings are utilized as the sealing member.

Cover Type T Quick Opening Threaded CoverThe threaded cover closure consists of a cap which fastens to a hub that has been welded to the strainer body. The female cap is threaded onto the male hub and an O-Ring is utilized to make the seal. The placement of this O-Ring prevents corrosion of the closure threads allowing for long, trouble free service. The threaded closure can be utilized on both nominal and high pressure applications. General Comparison of Different Closure TypesClosure Type Comparison Item Cost (Ranking 1 = Least Expensive) Quick Opening Ability (Ranking 1 = Quickest) Low Pressure Applications (Recommended Closures) Nominal Pressure Applications (Recommended Closures) High Pressure Applications (Recommended Closures) Bolted Type B 1 5 X X X Bolted with davit Swing Bolt Hinged Type BD Type H 2 4 X X X 3 3 X X X X X X Yoke Type Y 4 1 Threaded Type T 4 1

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Replacement BasketsDesign Features:IFC designs and manufactures baskets for all makes of basket and duplex strainers. The range of materials and size of units is unlimited. IFC is able to provide baskets manufactured from: Perforated Plate Mesh or Mesh/Perf. combination Wedge Wire Electron Beam Small Hole Perforated Plate

Using the above processes or combination thereof, IFC can provide screens and baskets suitable for a wide range of applications.

Screen/Basket ChecklistKindly photocopy this page and fill out the pertinent information.BASKET STRAINER STYLE "1"

Performance Requirements Description Customers Requirement

C

Required Level of Filtration Material of Construction

D E F B ADimensional Requirements Description Basket Style Basket Outer Diameter Basket Height Ring OD Overall Height Ring Thickness Basket Long Height (1 or 2) A B C D E F

Minimum Specified Burst Pressure Flow Direction Other

Customers Requirement

BASKET STRAINER STYLE "2"

C

D B E

A

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Engineering Data Screen Openings for Basket StrainersFACTORS TO CONSIDER 1. PurposeIf the basket strainer is being used for protection rather than direct filtration, IFCs standard screens will suffice in most applications.

3. Filtration LevelWhen choosing a perf. or a mesh/perf. combination attention should be given to ensure overstraining does not occur. As a general rule the specified level of filtration should be no smaller than half the size of the particle to be removed. If too fine a filtration is specified the pressure drop through the strainer will increase very rapidly, possibly causing damage to the basket.

2. ServiceWith services that require extremely sturdy screens, such as high pressure/ temperature applications or services with high viscosities, IFC recommends that perforated screens without mesh liners be used. If mesh is required to obtain a certain level of filtration, then IFC recommends a trapped perf/mesh/perf combination.

Notes: 1. Screen openings other than those shown above are readily available. IFC inventories various mesh sizes as fine as 5 micron and perforated plate as coarse as 1/2 Dia. 2. Screens are available in a wide range of materials. IFC inventories various screen material in carbon steel, stainless steel (304, 316), alloy 20, monel 400, hastalloy C and titanium grade 2. 3. Custom manufactured screens are available upon request. Please consult factory.

0.027 Dia. - 23% O.A.

3/16 Dia. - 50% O.A.

1/16 Dia. - 37% O.A.

3/64 Dia. - 36% O.A.

1/32 Dia. - 40% O.A.

100 Mesh - 30% O.A. 0.006 Openings

5/32 Dia. - 58% O.A

3/32 Dia. - 39% O.A

1/4 Dia. - 40% O.A.

1/8 Dia. - 40% O.A.

20 Mesh - 49% O.A. 0.035 Openings

30 Mesh - 45% O.A. 0.022 Openings

40 Mesh - 41% O.A. 0.016 Openings

60 Mesh - 38% O.A. 0.010 Openings

80 Mesh - 36% O.A. 0.008 Openings

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Engineering Data Temporary Strainer Pressure Drop - LiquidsTEMPORARY STRAINER PRESSURE DROP - LIQUIDS (SIZES 3/4" - 5")10

FIGURE 1

PRESSURE DROP (PSID)

4 1/ 2

4

1/

1/

1

2

2 3

3/

1

0.1 1 10FLOW RATE (GPM)

1

1

2

100

4

5

1000

TEMPORARY STRAINER PRESSURE DROP - LIQUIDS (SIZES 6" - 48")10

FIGURE 2

PRESSURE DROP (PSID)

42

14 16 18 20

24

1

0.1 100 1000FLOW RATE (GPM)

10

12

10000

30

36

48

6

8

100000

Notes: 1. Pressure drop curves are based on water flow with standard screens. See page 28 for correction factors to be used with other fluids and/or screen openings.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Engineering Data Fabricated Y and Tee Strainer Pressure Drop - LiquidsFABRICATED Y- STRAINER PRESSURE DROP - LIQUIDS (SIZES 2" - 24")10

FIGURE 3

PRESSURE DROP (PSID)

16 18 20

1

0.1 10 100FLOW RATE (GPM)

1000

10

12 14

TEE STRAINER PRESSURE DROP - LIQUIDS (SIZES 2" - 24")10

FIGURE 4

PRESSURE DROP (PSID)

12 14 16 18 20

10

1

0.1 10 100FLOW RATE (GPM)

1000

Notes: 1. Pressure drop curves are based on water flow with standard screens. See page 28 for correction factors to be used with other fluids and/or screen openings.

2410000

2

3

4

5

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

6

8

2410000

2

3

4

5

6

8

Engineering Data Fabricated Basket and Duplex Strainer Pressure Drop - LiquidsFABRICATED BASKET STRAINER PRESSURE DROP - LIQUIDS (SIZES 2" - 24")10

FIGURE 5

PRESSURE DROP (PSID)

1

0.1 10 100FLOW RATE (GPM)

1000

FABRICATED DUPLEX STRAINER PRESSURE DROP - LIQUIDS (SIZES 5" - 24")10

FIGURE 6

PRESSURE DROP (PSID)

10

12

14

16

18

20

1

0.1 100 1000FLOW RATE (GPM)

2410000

5

6

Notes: 1. Pressure drop curves are based on water flow with standard screens.See page 28 for correction factors to be used with other fluids and/or screen openings.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

8

2410000

16 18 20

12 14

10

4

3

2

5

6

8

Engineering Data Screen Correction Factor ChartFor Non-Standard and Mesh Lined Screens*Multiply values obtained from figure 1 thru 6 by the appropriate values shown below Size Range 60% 0.45 0.65 Chart #1 SCREEN OPENINGS Perforated Plate Mesh lined standard screens % Screen Material Open Area % Screen Material Open Area 50% 40% 30% 20% 50% 40% 30% 0.55 0.7 1 1.15 1.05 1.05 1.2 0.8 1 1.4 2.15 1.05 1.05 1.2

3/4 - 1-1/2 2 - 48 Notes: 1. See page 24 for % Open Areas of IFC inventoried perforated plate.

2. Standard screens for sizes 3/4 to 1-1/2 is approximately a 30% open area screen media. 3. Standard screens for sizes 2 and larger is approximately a 40% open area screen media.

Example: Strainer Size: IFC Model: Filtration: Flow rate: Service:

10 B150FSBW1 100 Mesh lined 1/8 Perf. 3000 GPM Water

A) Using figure 5 the pressure drop is determined to be 2.0 psid with IFCs standard screen. B) Looking at page 26 we find that the % Open area of 100 mesh is 30%. C) Using chart 1 we read the correction factor to be 1.2 for 100 mesh lined 1/8 perf. D) Total pressure drop equals 2.0 x 1.2 = 2.4 psid clean.

Viscosity and Density Correction Factor ChartChart #2 Size Range Component factor (CF) 0.25 Viscosity Body Loss Cp Factor (BF) 10 1 25 1.2 100 1.6 200 2.2 500 4.4 1000 8 2000 15.2 Screen Loss Factor Perf alone 20 mesh 30, 40, mesh (PF) lined (MF) lined (MF) 1.15 1.3 1.4 1.25 2 2.2 1.4 3 4 1.5 4.5 7 1.6 10 15 1.7 15 30 1.9 30 60 Chart #3 60 to 300 Mesh lined (MF) 1.5 2.5 6.5 11.5 25 50 100

3/4 - 1-1/2

2 - 48

0.35

How to Use: 1) Determine the pressure drop (P1) through the strainer with water flow and standard screens. 2) If non-standard screens (i.e. 40 mesh, etc.) are being used, apply factors in chart #1 to determine corrected pressure drop (P2). 3) Multiply P1 or P2 (if used) by the specific gravity of the fluid actually flowing through the strainer to get P3. 4) Using chart #2 multiply P3 by the appropriate Component Factor (CF) to get P4. 5) Let P5 = P3 - P4. 6) Multiply P4 by the appropriate Body Loss Factor (BF) in chart #3 to get P6. 7) Multiply P5 by the appropriate Screen Loss Factor (PF or MF) in chart #3 to get P7. 8) Total pressure drop P8 = P6 + P7. Example: Strainer Size: 10 IFC Model: B150FSBW1 Filtration: 100 mesh lined 1/8 perf. Flow rate: 3000 GPM Specific Gravity: 1 Viscosity: 100 cP A) As shown in the above example, the corrected pressure drop (P2) = 2.4 psid B) Since S.G. = 1, P3 = P2 = 2.4 psid C) Using chart #2 P4 = 0.35 x P3 = 0.84 psid D) P5 = 2.4 - 0.84 = 1.56 psid E) Using chart #3 P6 = 0.84 x 1.6 = 1.34 psid F) Again using chart #3 P7 = 1.56 x 6.5 = 10.14 psid G) Total pressure drop P8 = 1.34 + 10.14 = 11.48 psid clean

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Engineering Data Correction Factors For Clogged Screens* Multiply values obtained from figures 1 thru 6 by the appropriate values shown below % Clogged 10% 20% 30% 40% 50% 60% 70% 80% 90% 2.3 1.1 3.45 1.75 6 1.15 1.75 3.6 13.5 1.25 1.8 2.95 6.25 24 1.15 1.4 1.8 2.5 3.7 6.4 14 55 10:1 8:1 Ratio of Free Screen Area to Pipe Area 6:1 4:1 3:1 2:1 1:1 3.15 3.9 5 6.65 9.45 14.5 26 58 Chart #4

Notes: A) See page 35 for the ratio of free area to pipe area for IFC Strainers equipped with standard screens.B) For screens other than IFCs standard, use the following formula to calculate the ratio free area to pipe area:

R = Ag x OA 100ApExample #1 Strainer Size: IFC Model: Filtration: Flow rate: Service: % Clogged: 8 T150FSBW1 1/8 Perf. 1000 GPM Water 20%

where; R Ag OA Ap

= = = =

Ratio free area to pipe area Gross screen area, sq. in. (See page 35) Open area of screen media, % (See page 24, i.e. 1/8 perf. = 40%) Nominal area of pipe fitting, sq. in. (See page 35)

A) Using figure #4 the pressure drop is determined to be 0.9 psid with IFCs standard screen. B) Looking at page 35 ratio of free area to pipe area for a 8 IFC series T strainer is equal to 1.3:1 (1:1 approx.). C) Using chart #4 we read the correction factor to be 3.9 at 20% clogged. D) Total pressure drop equals 0.9 x 3.9 = 3.51 psid when 20% clogged.

Example #2 Strainer Size: IFC Model: Filtration: Flow rate: Service: % Clogged: 8 T150FSBW1 5/32 Perf. 1000 GPM Water 60%

A) Using figure #4 the pressure drop is determined to be 0.9 psid with IFCs standard screen. B) Looking at page 24 we find that the % Open area (OA) of 5/32 Perf. is 58%. C) Using chart #1 we read the correction factor to be 0.65 for 5/32 Perf. D) Total clean pressure drop equals 0.9 x 0.65 = 0.59 psid. E) Since a non-standard screen is being used, we must calculate the Ratio free area to pipe area. F) Looking at page 35 we find Ag = 167 in2, Ap = 50.03 in2. G) The ratio free area to pipe area is calculated as 1.9:1. (2:1 approx.) H) Using chart #4 we read the correction factor to be 3.7 at 60% clogged. I) Total pressure drop equals 0.59 x 3.7 = 2.2 psid when 60% clogged.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Engineering Data IFC Series TB Strainer Burst PressureFIGURE 7

11 16 20 26 32 G

AU

G AU G E

G AU G E

G AU G E

60% 50% 40% 30% 20%

G AU G E

G E

2

4

6

8

10 12 14 16 18 20

40 0

25

50

75

100

STRAINER SIZE (In.)

BURST PRESSURE (PSID)

Notes: 1. The above chart is to be used for strainers manufactured from perforated plate and is based on the formula:

t =d

0.3P S

SOURCE: ASME Section VIII, Div. 1., UG-34.

t d P S

= = = =

Thickness of perforated plate, in. Dimension B (See page 4), in. Burst Pressure, psi Reduced allowable stress, psi

2. The above chart is based on IFCs standard dimensions. Higher burst pressure ratings are available. Please contact factory. 3. The above chart is based on a screen material of stainless steel. No safety factor is incorporated. It is the responsibility of the user to determine an acceptable safety factor. 4. See page 24 for % Open Areas of IFCs inventoried perforated plate. Example: Strainer Size: Screen Thickness: Screen Material Open Area: 10 11 gauge 20% Locate Strainer size. Follow vertical line to gauge thickness. Follow horizontal line to required perforation open area. Follow vertical line downwards to read burst pressure. Burst pressure equals 27 psid.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Engineering Data IFC Series TC Strainer Burst PressureFIGURE 8

GA UG E 16 GA UG 20 E GA UG 26 E GA UG 32 E GA UG E

11

60% 50% 40% 30% 20%

1

2

3

4

5

6

8

10

20

30

40 0

25

50

75

100

STRAINER SIZE (In.)

BURST PRESSURE (PSID)

Notes: 1. The above chart is to be used for strainers manufactured from perforated plate and is based on the formula:

P = 2St c o s D + 1.2t cosSOURCE: ASME Section VIII, Div. 1., Appendix 1.

P S t D

= = = = =

Burst Pressure, psi. Reduced allowable stress Thickness of perforated plate, in. Dimension B (See page 4), in. 15 degree

2. The above chart is based on IFCs standard dimensions. Higher burst pressure ratings are available. Please contact factory. 3. The above chart is based on a screen material of stainless steel. No safety factor is incorporated. It is the responsibility of the user to determine an acceptable safety factor. 4. See page 24 for % Open Areas of IFCs inventoried perforated plate. Example: Strainer Size: Screen Thickness: Screen Material Open Area: 10 26 gauge 30% Locate Strainer size. Follow vertical line to gauge thickness. Follow horizontal line to required perforation open area. Follow vertical line downwards to read burst pressure. Burst pressure equals 41 psid.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: s[email protected]

Engineering Data Y-Strainer Screen Burst PressureFIGURE 9

11 GA UG 16 E GA UG 20 E GA UG 26 E GA UG E 32 GA UG E

60% 50% 40% 30% 20%

1

2

3

4

5

6 7 8 9 10

20

30

40 0

25

50

75

100

STRAINER SIZE (In.)

BURST PRESSURE (PSID)

Notes: 1. The above chart is to be used for strainers manufactured from perforated plate and is based on the formula:

P=

St R - 0.4t

SOURCE: ASME Section VIII, Div. 1., Appendix 1.

P S t R

= = = =

Burst Pressure, psi Reduced allowable stress, psi Thickness of perforated plate, in. Outside radius of screen, in.

2. The above chart is based on IFCs standard dimensions. Higher burst pressure ratings are available. Please contact factory. 3. The above chart is based on a screen material of stainless steel. No safety factor is incorporated. It is the responsibility of the user to determine an acceptable safety factor. 4. See page 24 for % Open Areas of IFCs inventoried perforated plate. Example: Strainer Size: Screen Thickness: Screen Material Open Area: 10 16 gauge 60% Locate Strainer size. Follow vertical line to gauge thickness. Follow horizontal line to required perforation open area. Follow vertical line downwards to read burst pressure. Burst pressure equals 56 psid.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Engineering Data T-Strainer Screen Burst PressureFIGURE 10

11 16

20 26 32 G A U G E G A U G E

G A U G G E A U G E

G A U G E

60% 50% 40% 30% 20%

1

2

3

4

5

6

8

10

20

30

40 0

25

50

75

100

STRAINER SIZE (In.)

BURST PRESSURE (PSID)

Notes: 1. The above chart is to be used for strainers manufactured from perforated plate and is based on the formula:

t =d

0.3P S

SOURCE: ASME Section VIII, Div. 1., UG-34.

t d P S

= = = =

Thickness of perforated plate, in. Basket Diameter, in. Burst Pressure, psi Reduced allowable stress, psi

3. The above chart is based on IFCs standard dimensions. Higher burst pressure ratings are available. Please contact factory. 4. The above chart is based on a screen material of stainless steel. No safety factor is incorporated. It is the responsibility of the user to determine an acceptable safety factor. 5. See page 24 for % Open Areas of IFCs inventoried perforated plate. Example: #1 Strainer Size: Screen Thickness: Screen Material Open Area: 8 11 gauge 40% Locate Strainer size. Follow vertical line to gauge thickness. Follow horizontal line to required perforation open area. Follow vertical line downwards to read burst pressure. Burst pressure equals 20 psid.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Engineering Data Basket and Duplex Strainer Basket Burst PressureFIGURE 1160% 50% 40% 30% 20%

11 16 20 26 32 G AU G E G

G AU G E

D SOLI

BOTT

OM

G AU G E

AU G G E AU G E

1

2

3

4

5

6

8

10

20

30

40 0

25

50

75

100

STRAINER SIZE (In.)

BURST PRESSURE (PSID)

Notes: 1. The above chart is to be used for strainers manufactured from perforated plate and is based on the formula:

t =d

0.3P S

SOURCE: ASME Section VIII, Div. 1., UG-34.

t d P S

= = = =

Thickness of perforated plate, in. Basket Diameter, in. Burst Pressure, psi Reduced allowable stress, psi

2. As standard, IFC supplies baskets with perforated bottoms. 3. The above chart is based on IFCs standard dimensions. Higher burst pressure ratings are available. Please contact factory. 3. The above chart is based on a screen material of stainless steel. No safety factor is incorporated. It is the responsibility of the user to determine an acceptable safety factor. 5. See page 24 for % Open Areas of IFCs inventoried perforated plate. Example: #1 Strainer Size: Basket Type: 8 Perforated screen with 11 gauge solid flat bottom 20% - 60% Locate Strainer size. Follow vertical line to solid thickness. Follow horizontal line to solid bottom curve. Follow vertical line downwards to read burst pressure. Burst pressure equals 19 psid. Locate Strainer size. Follow vertical line to gauge thickness. Follow horizontal line to 40% Open Area curve. Follow vertical line downwards to read burst pressure. Burst pressure equals 44 psid.

Screen Material Open Area: Example: #2 Strainer Size: Basket Type:

4 11 gauge perforated screen with 11 gauge perforated flat bottom. 40%

Screen Material Open Area:

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Engineering Data Fabricated Strainer Screen Effective AreasStrainer Type Y Y Y Y Y Y Y Y Y Y Y Y Y T T T T T T T T T T T T T T B B B B B B B B B B B B B (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) #1) Pipe Size (In.) 2 3 4 5 6 8 10 12 14 16 18 20 24 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 2 3 4 5 6 8 10 12 14 16 18 20 24 2 3 4 5 6 8 10 12 14 16 18 20 24 Std. Opening (in.) 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.188 0.188 0.188 0.188 0.188 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.188 0.188 0.188 0.188 0.188 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.188 0.188 0.188 0.188 0.188 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.188 0.188 0.188 0.188 0.188 Nominal Area of Sch. 40 / Std. Pipe (Sq. In.) 3.36 7.39 12.73 20.01 28.89 50.03 78.85 113.10 140.50 185.66 237.10 294.83 429.13 3.36 4.79 7.39 12.73 20.01 28.89 50.03 78.85 113.10 140.50 185.66 237.10 294.83 429.13 3.36 7.39 12.73 20.01 28.89 50.03 78.85 113.10 140.50 185.66 237.10 294.83 429.13 3.36 7.39 12.73 20.01 28.89 50.03 78.85 113.10 140.50 185.66 237.10 294.83 429.13 Gross Screen Area (Sq. In.) 39 77 135 160 215 375 545 785 900 1210 1560 1950 2765 22 25 40 58 82 105 167 235 330 420 510 640 780 1060 215 265 265 380 560 570 910 1300 1600 1830 2290 2800 4090 215 265 265 380 560 570 910 1300 1600 1830 2290 2800 4090 Free Area (Sq. In.) 16 31 54 64 86 150 218 314 360 484 624 780 1106 9 10 16 23 33 42 67 94 132 168 204 256 312 424 86 106 106 152 224 228 364 520 640 732 916 1120 1636 86 106 106 152 224 228 364 520 640 732 916 1120 1636 Ratio Free Area to Pipe Area 4.6 4.2 4.2 3.2 3.0 3.0 2.8 2.8 2.6 2.6 2.6 2.6 2.6 2.6 2.1 2.2 1.8 1.6 1.5 1.3 1.2 1.2 1.2 1.1 1.1 1.1 1.0 25.6 14.3 8.3 7.6 7.8 4.6 4.6 4.6 4.6 3.9 3.9 3.8 3.8 25.6 14.3 8.3 7.6 7.8 4.6 4.6 4.6 4.6 3.9 3.9 3.8 3.8

DB DB DB DB DB DB DB DB DB DB DB DB DB

(Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style (Style

Notes: 1. Values shown are approximate. Contact factory for exact ratios.2. Values shown are for strainers with standard screens. 3. The ratio free area to pipe area may be increased by changing perf. stagger or by using heavy wire mesh.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Check List and Suggested Specifications For ISLIP Flow Controls Inc.Strainer Check List: When selecting a strainer, please take the factors listed below into account.This will assist us when recommending a strainer to suit your specific requirements. Please photocopy this page and fill out the pertinent information.1. Fluid to be strained 2. Flow rate 3. Density of fluid 4. Viscosity of fluid 5. Fluid working pressure Maximum pressure 6. Fluid working temp. Maximum temp. 7. Preferred material of strainer construction of 8. Present pipeline size & material 9. Nature of solids to be strained out 10. Size of solids to be strained out Size of mesh or perf. req. 11. Clearance Limitation Above Left side facing inlet Below Right side facing inlet

Suggested SpecificationsThe strainer shall be a basket strainer and have (size) inlet/outlet connections. The end connections shall be (flanged, threaded etc.) and the body shall be complete with a (bolted, quick-opening, etc.) cover

assembly. The strainer shall be suitable for PSIG operating pressure at temperature. The body shall be constructed of (body material) while the screen shall be constructed of (basket or screen material). A mesh lining (size of mesh) is required, F operating

allowing a maximum pressure drop of psig. The strainer shall be equipped with a (gasket material) gasket and the strainer screen shall be able to withstand without any deformation. Strainers shall be IFC Model # or approved equivalent. Name Company psig differential pressure

12. Maximum pressure drop with clean screen 13. Expected cleaning frequency 14. Any other information deemed relevant

Address City/Town State Telephone ( Fax ( ) ) Zip Code

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

Installation and Maintenance Instructions for IFC Fabricated StrainersStrainer Installation Instructions Ensure all machined surfaces are free of defects and that the inside of the strainer is free of foreign objects. For horizontal and vertical pipelines, the strainer should be installed so that the drain connection is pointed downwards. For flanged end strainers, the flange bolting should be tightened gradually in a back and forth clockwise motion. Threaded end strainers should use an appropriate sealant. Once installed, increase line pressure gradually and check for leakage around joints. If the strainer is supplied with a start-up screen, monitor pressure drop carefully.

Trouble Shooting Guides and Diagnostic Techniques After pressurizing, inspect cover and other joints for leakage. Gasket replacement or cover tightening is necessary if leakage occurs. If the required filtration is not taking place, ensure the screen is installed in the correct position, that being flush to the screen seating surfaces.

Limited WarrantyAll products are warranted to be free of defects in material and workmanship for a period of one year from the date of shipment, subject to the limitations below: If the purchaser believes a product defective, the purchaser shall: (a) Notify the manufacturer, state the alleged defect and request permission to return the product. (b) If permission is given, return the product with transportation prepaid. If the product is accepted for return and found to be defective, the manufacturer will, at its discretion, either repair or replace the product, f.o.b. factory, within 60 days of receipt, or refund the purchase price. Other than to repair, replace or refund described above, the purchaser agrees that the manufacturer shall not be liable for any losses, costs, expenses or damages of any kind arising out of the product, its use, installation or replacement, labeling, instructions, information or technical data of any kind, description of product use, sample or model, warnings or lack of foregoing. No other warranties, written or oral, expressed or implied, including the warranties of fitness for a particular purpose and merchantability, are made or authorized. No affirmation of fact, promise, description of product use or sample or model shall create any warranty from the manufacturer, unless signed by the president. These products are not manufactured, sold or intended for personal, family or household purposes.

Screen Removal Instructions (Y, Basket, T and Duplex)Drain piping (For Duplex Strainers, isolate required chamber). Vent line to relieve pressure. Loosen cover and open to access screen. Remove, clean and replace screen in original position (Note: In some instances, a high pressure water jet or steam may be required for effective cleaning) Inspect cover gasket for damage. If necessary, replace. (Note: If spiral wound gaskets have been used, they must be replaced and can not be used again). Tighten cover. The strainer is ready for line start-up. CAUTION SHOULD BE TAKEN DUE TO POSSIBLE EMISSION OF PROCESS MATERIAL FROM PIPING. ALWAYS ENSURE NO LINE PRESSURE EXISTS WHEN OPENING COVER.

Maintenance InstructionsFor maximum efficiency, determine the length of time it takes for the pressure drop to double that in the clean condition. Once the pressure drop reaches an unacceptable value, shut down line (For Duplex Strainers divert flow to other chamber) and follow the Screen Removal Instructions above. A pressure gauge installed before and after the strainer in-line will indicate pressure loss due to clogging and may be used to determine when cleaning is required.

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]

How To OrderSize In. Strainer Type8" TC TB TP Y T B DB 300 WFN WFS WRS WRTJ T SW F BW RTJ G I S SS4 SS6 LC B BD H Y T C G W C = = = = = = = = = = = = = = = = = = = = = = Wafer Flat Face (Smooth Finish) Wafer Flat Face (Serrated Finish) Wafer Raised Face (Serrated Finish) Wafer Ring Joint NPT Threaded Socket Weld Flanged (RF or FF depending on standard of construction) Buttweld Ring Joint Grooved Cast Iron Carbon Steel 304 Stainless Steel 316 Stainless Steel Low Temperature Carbon Steel Bolted Cover (Gasket Seal) Bolted Cover (Gasket Seal) with Davit Swing Bolt Hinged Cover (O-ring Seal) Yoke Cover (O-Ring Seal) Quick-Opening Threaded Cover (O-ring Seal) Quick-Opening C-Clamp Cover (O-Ring Seal) Grooved = = = = = = = Conical Temporary Strainer Basket Temporary Strainer Plate Temporary Strainer Y-Strainer Tee Strainer Basket Strainer Duplex Strainer

ANSI Pressure Class Connection Type

Body Material* Other materials available upon request

Cover Type* Not applicable for temporary strainers

Construction Type Style* Style 1 will be supplied if style not specified

= Welded = Cast

TB, TC, TP Strainers 1 = Flow inside to outside 2 = Flow outside to inside 3 = Bi-directional flow -100 = 100% open area -150 = 150% open area -200 = 200% open area -300 = 300% open area Y Strainers 1 = One style only T Strainers 1 = Inline Flow 2 = 90 degree angle flow - one direction only 3 = 90 degree angle flow - bi-directional B (Basket) Strainers 1 = Inline oversized body 2 = Offset oversized body 3 = Inline standard capacity body 4 = Offset standard capacity body 5 = Inline UL listed DB (Duplex) Strainers 1 = Inline manifold construction 2 = Inline elbow construction 3 = Offset compact face to face 1 2 3 4 5 6 7 8 9 = = = = = = = = = Non-standard screen Non-standard gasket Special external coating Special internal coating NACE MR01-75 Compliance Special N.D.E. Code stamped (CRN) Code stamped (U, UM) Other Special

Specials / Other

A

B

C

D

E

F

G

H

I

Tel. (888) 754-6329, (416) 288-1736, Fax (416) 288-0385, E-mail: [email protected]